This document is a service manual that provides technical specifications, maintenance and repair instructions for backhoe loaders. It includes sections covering safety, the engine, transmission, axles, brakes, hydraulics, electrical systems, and attachments. The manual provides detailed instructions on removal and installation of components, disassembly and assembly, troubleshooting, and specifications for the loader and backhoe attachments.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Your VW's camshaft position sensor is crucial for engine performance. Signs of failure include engine misfires, difficulty starting, stalling at low speeds, reduced fuel efficiency, and the check engine light. Prompt inspection and replacement can prevent further damage and keep your VW running smoothly.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
How To Fix The Key Not Detected Issue In Mercedes CarsIntegrity Motorcar
Experiencing a "Key Not Detected" problem in your Mercedes? Don’t take it for granted. Go through this presentation to find out the exact nature of the issue you are dealing with. Have your vehicle checked by a certified professional if necessary.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Your VW's camshaft position sensor is crucial for engine performance. Signs of failure include engine misfires, difficulty starting, stalling at low speeds, reduced fuel efficiency, and the check engine light. Prompt inspection and replacement can prevent further damage and keep your VW running smoothly.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
How To Fix The Key Not Detected Issue In Mercedes CarsIntegrity Motorcar
Experiencing a "Key Not Detected" problem in your Mercedes? Don’t take it for granted. Go through this presentation to find out the exact nature of the issue you are dealing with. Have your vehicle checked by a certified professional if necessary.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
10. SECTION 00 - SAFETY RULES 3
SAFETY INSTRUCTIONS
The non-compliance with the warnings preceded by
the above-mentioned keywords (WARNING and
DANGER) can cause serious accidents or even the
death of the persons involved.
Moreover, in the present Manual, some instructions
are given with text in italics, preceded by the words
NOTE and CAUTION.
NOTA: it emphasizes and underlines to the operator
the correct technique or correct procedure to follow.
S WARNING S
This warning symbol points out important mes-
sages involving your safety.
Carefully read the safety rules contained herein
and follow advised precautions to avoid potential
hazards and to safeguard your safety and personal
integrity.
In this manual you will find this symbol together
with the following keywords:
S WARNING S
This symbol warns about the possibility of potential
damages to the machine that can involve the oper-
ator’s safety.
S WARNING S
With specific warnings about potential dangers for
the operator’s or other persons integrity directly or
indirectly involved.
S WARNING S
This symbol warns about the possibility of potential
damages to the machine that can involve the oper-
ator’s safety.
11. 4 SECTION 00 - SAFETY RULES
FOREWORD
Loader backhoes B100C - B100CLR - B100CTC -
B110C - B110CTC - B115C have been designed to
perform most earth-moving operations.
If you use this machine for duties involving the use
of attachments, accessories, or special tools, con-
sult your Dealer to make sure that the adaptations or
modifications carried out are in conformity with the
machine’s technical specifications and with current
regulations on safety.
Any modifications or adaptations which are not
approved by the manufacturer may invalidate the
machine’s original conformity with safety require-
ments.
The machine must be used according to its intended
use, respecting the safety and precautionary rules
and strictly following the operating instructions.
Any functional disorders, especially those affecting
the safety of the machine, should therefore be recti-
fied immediately.
The manufacturer/supplier cannot be held responsi-
ble for any damage resulting from unintended use.
The risk involved in such misuse lies entirely with
the user.
The current Operator’s Manual is the user’s guide
for correct run-in, use and maintenance of the
machine.
S DANGER S
A different use of the excavator or of its working
equipment:
- for lifting or transporting persons;
- as working platform;
- for lifting loads without the attachment being
approved for this purpose;
- for pulling loads;
- is considered unintended use.
Unintended use may cause injury or life-threatening
risks for the operator and for other persons.
S DANGER S
It is absolutely forbidden to tamper with and/or
change the setting of any of the hydraulic system
valves to avoid damaging machine components,
with a consequent risk for personal safety.
1
12. SECTION 00 - SAFETY RULES 5
Carefully read this Operator’s Manual and store it in
the cab for quick location and reference.
Instructions concerning safety, operation and main-
tenance have been developed to permit safe serv-
ice and repair of this machine without any risk.
In the event of queries or suggestions relevant to
your machine do not hesitate to address to your
Dealer.
Dealers have qualified and trained personnel at dis-
posal as well as Original Spares, means and equip-
ment suitable to carry out all necessary
maintenance.
Any modifications or adaptations which are not ap-
proved by the manufacturer may invalidate the ma-
chine’s original conformity with safety requirements.
IMPORTANTE: the engine and fuel system on your
machine are designed and built to government
emissions standards. Tampering by dealers, cus-
tomers, operators and users is strictly prohibited by
law. Failure to comply with this prohibition could
result in government fines, rework charges, invalid
warranty, legal action and possible confiscation of
the machine until rework to original condition is
completed. Engine service and/or repairs must be
carried out by a certified technician only.
NOTA: each machine is supplied complete with a
copy of this Manual. Descriptions and illustrations
provided herein are not binding. The Manufacturer,
provided that the basic characteristics of machine
types described and shown in this Manual remain
the same, reserves the right to change compo-
nents, parts and accessories supplied without any
commitment to timely update this publication; and
this any time it deems it convenient for improve-
ment purposes or due to commercial or manufac-
turing requirements. For exact information, please
consult your Dealer or contact the Manufacturer’s
Branch Offices, who remain at your disposal for fur-
ther help.
SPARE PARTS
The “non-genuine” spare parts have not been
checked and authorized by the Manufacturer.
The assembly and/or use of such products may
have negative effects on the machine design fea-
tures and could impair its operation safety.
The Manufacturer is not liable for any damage
caused by “non-genuine” spare parts or accesso-
ries.
WARRANTY
This machine is under warranty according to the
regulations in force in Your Country and in compli-
ance with the sales agreement drawn up with the
Dealer.
The warranty, however, expires if the operation and
maintenance instruction for this machine and con-
tained in this manual, have not been followed.
13. 6 SECTION 00 - SAFETY RULES
SAFETY INSTRUCTIONS
Carefully read the safety rules contained herein and
follow advised precautions to avoid potential haz-
ards and to safeguard your safety and personal
integrity.
Your safety and that of the people around you
depends on you.
It is essential that you understand this manual for a
correct inspection, lubrication and repair of this
machine.
Read this manual carefully and check that:
- you understand fully the symbols on the controls
and the safety signs used in this manual and on
the machine;
- you understand fully the speed, stability, braking
and steering characteristics of the machine. If you
are in any doubt, consult your Dealer.
The safety messages in this section concern situa-
tions which may arise during normal machine opera-
tion, servicing and repair. These safety messages
also indicate the different ways of coping with these
situations. Other safety messages are used
throughout the manual to indicate specific dangers.
The information given in this chapter is a summary
of the basic rules to respect at all times and does
not exempt you from observing traffic regulations or
the requirements of insurance companies.
The presence of grease, oil, mud or (in winter) ice
on the steps and access handles can cause acci-
dents. Make sure they are always clean.
When mounting or dismounting from the machine
always face the machine and use the steps and
access handles on the left-hand side of the
machine.
15. SECTION 10 - ENGINE 3
REMOVAL AND INSTALLATION OF THE ENGINE HOOD, THE RADIATOR AND ENGINE
Preliminary operations
Z Position the machine on a flat and compact sur-
face.
Z Apply the parking brake and chock the wheels
with wedges.
Z Use only the recommended tools.
Z Do not insert hands or extraneous components
between parts.
Z Disconnect the battery before proceeding.
Turn the STARTER SWITCH to the OFF position
and display the “DO NOT START” warning notice.
IMPORTANT: From this point onwards, mark all
electrical connections and hydraulic pipes to facili-
tate the process of RESTORING CONNECTIONS
DURING REFITMENT.
Z Unscrew the cap of the hydraulic oil tank slowly to
release the air pressure from inside the tank.
Z Move the control lever repeatedly back and forth
to release pressure in the hydraulic circuit.
Z With oil warm, remove plug from the bottom of the
machine and drain the oil into a receptacle of suit-
able capacity.
Put a container below radiator drain. Remove radia-
tor cap. Remove cap and drain coolant into con-
tainer. Install cap after coolant has drained. Install
radiator cap.
Put a container below engine oil drain. Remove cap
and drain oil into container. Install cap after oil has
drained.
S WARNING S
Do not allow unauthorized persons to repair or
service this machine. Be certain to read the Use
and Maintenance Manual with care before starting,
operating, servicing, refuelling or repairing this
machine.
S DANGER S
Fluid under pressure; Before removing the plug or
cap, turn slowly to release pressure from the sys-
tem. See the Use and Maintenance Manual.
16. 4 SECTION 10 - ENGINE
Battery - Disconnect
Remove the battery cover hardware.
TBR00002
Remove the battery cover.
TBR00003
S WARNING S
Explosive gas!
Batteries emit explosive hydrogen gas and other
fumes while charging. Ventilate the charging area.
Keep the battery away from sparks, open flames,
and other ignition sources. Never charge a frozen
battery. Failure to comply could result in death or
serious injury.
S WARNING S
Hazardous chemicals!
Battery electrolyte contains sulfuric acid. Contact
with skin and eyes could result in severe irritation
and burns. Always wear splash-proof goggles and
protective clothing (gloves and aprons). Wash
hands after handling.Failure to comply could result
in death or serious injury.
17. SECTION 10 - ENGINE 5
Disconnect the negative battery cable from the
negative battery terminal.
TBR00004
18. 6 SECTION 10 - ENGINE
Engine hood - Remove
Raise the loader in the full upright position. Lock
the support strut to hold the loader in the upright
position.
TBR00005
Remove grill hardware.
TBR00007
Remove grill bumpers.
TBR00008
Remove the grill.
TBR00006
19. SECTION 10 - ENGINE 7
Open hood and remove hood struts.
TBR00009
Remove hood straps.
TBR00010
Lower hood and attach lifting device.
TBR00011
Remove hood pivot point hardware.
TBR00012
21. SECTION 10 - ENGINE 9
Radiator - Remove
Discharge the A/C system, (if present).
NOTICE: Use appropriate reclaiming devices when
recovering A/C refrigerant.
TBR00020
Disconnect the electrical connection X2 from the
horn.
TBR00044
Disconnect the hoses and electrical connection
X70 from the filter drier air conditioned (if present)
and remove the filter.
TBR00015
22. 10 SECTION 10 - ENGINE
Disconnect the exhaust gas pipe.
TBR00016
Remove the four screws that secure the top cover
of the engine hood to the frame of the machine.
TBR00017
Remove the top cover of the engine hood from the
machine.
TBR00018
23. SECTION 10 - ENGINE 11
Remove hood hinge plates.
TBR00027
Remove the screws that secure the radiator wrap-
per of the engine hood to the frame of the machine.
TBR00019
Remove the radiator wrapper.
TBR00026
Remove the radiator purge hose.
TBR00021
24. 12 SECTION 10 - ENGINE
Remove the upper radiator hose.
TBR00022
Remove the charge air cooler hoses and pipes.
TBR00023
Cap (seal) all open ports to keep contaminates
from entering the system.
TBR00024
Remove the lower radiator hose.
TBR00025
25. SECTION 10 - ENGINE 13
Tag and disconnect the four front cooler lines and
cap all open ports.
TBR00029
Disconnect the duct air intake from air cleaner.
TBR00030
Remove the duct air intake.
TBR00028
Tag and disconnect the two cooler lines right hand
and cap open ports.
TBR00035
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. 14 SECTION 10 - ENGINE
Tag and disconnect the two cooler lines left hand
and cap open ports.
TBR00031
Attach a suitable device.
TBR00032
Remove cooling package mounting hardware.
TBR00033
Slowly raise cooling package from chassis. Be sure
all harness connections and hoses have been dis-
connected and are clear of the cooling package.
Remove cooling package from machine.
TBR00034
29. 16 SECTION 10 - ENGINE
Engine - Remove
Remove and disconnect compressor electrical con-
nection X473 (if present).
TBR00036
Identify, tag and disconnect the high pressure and
low pressure A/C lines, (if present).
TBR00037
Disconnect the air temperature sensor X474.
TBR00038
Remove the electrical connection X4 from 2-way
aircleaner connector.
TBR00045
30. SECTION 10 - ENGINE 17
Remove the pipe connecting the aircleaner with tur-
bocharger.
TBR00039
Remove the aspirator tube.
TBR00040
Remove crank case vent.
TBR00041
Remove the hoses right and left from delta pres-
sure sensor and the electrical connection X475.
TBR00042
31. 18 SECTION 10 - ENGINE
Disconnect the connecting exhaust pipe from the
turbocharger with a silencer/DPF opening the
clamp.
TBR00043
Remove from electronic module control the electri-
cal connection X469.
TBR00046
Remove from the engine electronic control unit the
electrical connection X470 (1) and X471 (2).
TBR00047
Remove the connection X468.
TBR00048
1
2
32. SECTION 10 - ENGINE 19
Remove the ground cable and ground strap.
TBR00049
Remove the connection X69.
TBR00050
Remove the connection X477 from temperature
sensor DPF.
TBR00051
Remove the alternator connection X67 and connec-
tion X10.
TBR00052
33. 20 SECTION 10 - ENGINE
Disconnect the electrical connection X508 from
starter motor and the ignition connection.
TBR00053
Remove the connection X476 from temperature
sensor DPF.
TBR00054
Remove the connection from heated Lambda sen-
sor.
TBR00058
Attach the aircleaner/DPF a lifting device suitable
and remove the screws (q.ty 4, two on each side).
TBR00055
34. SECTION 10 - ENGINE 21
Carefully remove the aircleaner/DPF from the chas-
sis and be rest on a special support.
TBR00056
Remove the four screws that secure the aircleaner
support of the DPF devise.
TBR00057
Remove the four screws that secure the aircleaner
to the support plate.
Remove the aircleaner from the support.
TBR00059