NEW 40 knot, 13m Patrol Boat
•
1 like•327 views
The SMITFastPatrolBoat is a 13.2 meter patrol boat built in 2012 by Alnmaritec Ltd. It has a crew of 2 and can carry 6 passengers, powered by 2 Cummins QSC 600hp main engines driving 2 Rolls-Royce waterjets. It has a maximum speed of 40 knots and is classified by Lloyds Register and UK MCA.
Report
Share
Report
Share
Download to read offline
Recommended
38 knot, 23M patrol boat
This document provides specifications for a 23m patrol boat, including its principal particulars such as length, beam, draught, crew capacity, fuel capacity, and performance details like maximum speed. It is being built by Ares Shipyard Ltd for the Qatar Coastguard, with 5 boats to be constructed. Its main engines are 2 x MTU 12V 2000 M84 powering 2 x Rolls Royce Kamewa 50A3 waterjets.
New 33 knot, 46m patrol boat
This document provides specifications for a 46m patrol boat being built for the Qatar Coastguard by Ares Shipyard Ltd. The boat can reach a maximum speed of 33 knots and has accommodations for a 25-person crew. It is powered by 3 MTU 12V 4000 M93L main engines driving 3 Rolls Royce 7153 waterjets. The boat has a length overall of 46.5m, beam of 8.7m, and draught of 1.8m.
New 30 knot, 33m patrol boat
This document provides specifications for a 33m patrol boat, including its length, beam, draught, crew capacity, fuel and water capacities, propulsion system, and performance details. The boat was built by Ares Shipyard for the Qatar Coastguard, has a maximum speed of 30.5 knots, and is powered by 3 MTU engines driving 3 Rolls Royce waterjets. It can carry a crew of 19 and has a range of over 15 knots on its 23500L fuel capacity.
BMT 42 knot; 14m patrol boat
This document provides specifications for a 14m patrol boat, including its length of 14.5 meters, beam of 4.0 meters, draught of 0.8 meters, crew of 2, troops of 4, and propulsion by 2 x Yanmar 6CXM main engines powering 2 x Hamilton HJ292 waterjets allowing it to reach a speed of 41 knots. The patrol boat was built by an unspecified builder and has yet to be classified.
New 17 m patrol boat
This document provides specifications for an 18m patrol boat built in 2014 for the Bahrain Coast Guard by Ares Shipyard. It has an overall length of 17.8m, beam of 4.8m, and can reach speeds up to 34 knots powered by two 810kW MTU engines. The boat has a crew of 5, can carry 3,800L of fuel and 750L of fresh water, and has a maximum deadweight of 4.7 tonnes.
X craft
The USNRVSeaFighterFSF1 is a 79.9 meter long, 22 meter wide high-speed catamaran built in 2005 that can carry up to 30 crew members, 2 helicopters, and 12 mission modules. It has a maximum speed of over 55 knots and a range of 4,000 nautical miles at 20 knots. Its propulsion system includes two MTU GE Lm2500 gas turbines and two MTU 16V 595 Te90 diesel engines powering four waterjets, allowing it to operate at speeds up to 52 knots while carrying 500 metric tons of payload.
DAMEN_Corporate_Brochure_English_09_2014
Damen Shipyards Group is a major shipbuilding company with 32 shipyards worldwide, over 6,000 employees, and annual deliveries of 120-150 vessels. It has delivered over 5,000 vessels since 1969 and has over 150 standard hull designs. The company was founded in 1927 and has grown into a multinational group through acquisitions and expansion. Damen focuses on modular construction and standard designs to offer vessels at competitive prices with short delivery times.
Kuwait
Kuwait City is the capital and largest city of Kuwait. It has a population of over 2.1 million people. Kuwait has significant oil reserves, holding about 10% of the world's total. However, Kuwait admitted in 2005 that production at the giant Burgan oil field, the second largest in the world, had peaked and was declining. During the Gulf War in 1990-91, the retreating Iraqi army set fire to over 600 oil wells causing major environmental damage.
Recommended
38 knot, 23M patrol boat
This document provides specifications for a 23m patrol boat, including its principal particulars such as length, beam, draught, crew capacity, fuel capacity, and performance details like maximum speed. It is being built by Ares Shipyard Ltd for the Qatar Coastguard, with 5 boats to be constructed. Its main engines are 2 x MTU 12V 2000 M84 powering 2 x Rolls Royce Kamewa 50A3 waterjets.
New 33 knot, 46m patrol boat
This document provides specifications for a 46m patrol boat being built for the Qatar Coastguard by Ares Shipyard Ltd. The boat can reach a maximum speed of 33 knots and has accommodations for a 25-person crew. It is powered by 3 MTU 12V 4000 M93L main engines driving 3 Rolls Royce 7153 waterjets. The boat has a length overall of 46.5m, beam of 8.7m, and draught of 1.8m.
New 30 knot, 33m patrol boat
This document provides specifications for a 33m patrol boat, including its length, beam, draught, crew capacity, fuel and water capacities, propulsion system, and performance details. The boat was built by Ares Shipyard for the Qatar Coastguard, has a maximum speed of 30.5 knots, and is powered by 3 MTU engines driving 3 Rolls Royce waterjets. It can carry a crew of 19 and has a range of over 15 knots on its 23500L fuel capacity.
BMT 42 knot; 14m patrol boat
This document provides specifications for a 14m patrol boat, including its length of 14.5 meters, beam of 4.0 meters, draught of 0.8 meters, crew of 2, troops of 4, and propulsion by 2 x Yanmar 6CXM main engines powering 2 x Hamilton HJ292 waterjets allowing it to reach a speed of 41 knots. The patrol boat was built by an unspecified builder and has yet to be classified.
New 17 m patrol boat
This document provides specifications for an 18m patrol boat built in 2014 for the Bahrain Coast Guard by Ares Shipyard. It has an overall length of 17.8m, beam of 4.8m, and can reach speeds up to 34 knots powered by two 810kW MTU engines. The boat has a crew of 5, can carry 3,800L of fuel and 750L of fresh water, and has a maximum deadweight of 4.7 tonnes.
X craft
The USNRVSeaFighterFSF1 is a 79.9 meter long, 22 meter wide high-speed catamaran built in 2005 that can carry up to 30 crew members, 2 helicopters, and 12 mission modules. It has a maximum speed of over 55 knots and a range of 4,000 nautical miles at 20 knots. Its propulsion system includes two MTU GE Lm2500 gas turbines and two MTU 16V 595 Te90 diesel engines powering four waterjets, allowing it to operate at speeds up to 52 knots while carrying 500 metric tons of payload.
DAMEN_Corporate_Brochure_English_09_2014
Damen Shipyards Group is a major shipbuilding company with 32 shipyards worldwide, over 6,000 employees, and annual deliveries of 120-150 vessels. It has delivered over 5,000 vessels since 1969 and has over 150 standard hull designs. The company was founded in 1927 and has grown into a multinational group through acquisitions and expansion. Damen focuses on modular construction and standard designs to offer vessels at competitive prices with short delivery times.
Kuwait
Kuwait City is the capital and largest city of Kuwait. It has a population of over 2.1 million people. Kuwait has significant oil reserves, holding about 10% of the world's total. However, Kuwait admitted in 2005 that production at the giant Burgan oil field, the second largest in the world, had peaked and was declining. During the Gulf War in 1990-91, the retreating Iraqi army set fire to over 600 oil wells causing major environmental damage.
Adventuress- A High Seas Adventure
Article about the Concrete School experience aboard the Schooner Adventuress.
Great Boat for Florida to Cuba
The document provides specifications for an Alaska Marine Highways ferry built in 2004. It is 71.7 meters long and powered by 4 MTU 16V595 Te70 main engines. It can carry 250 passengers, 35 cars weighing 4 tonnes each, and 4 trucks weighing 10 tonnes each, with a service speed of 35 knots and range of 500 nautical miles.
19 m fisheries research vessel v.2
This 19m fisheries research vessel has a length overall of 19m, length of waterline of 17.8m, and beam of 5.3m. It can carry 7 passengers and a crew of 2, with fuel capacity of 2300L, fresh water of 380L, and black water of 380L. Powered by 2 x 478kW Daewoo engines driving fixed pitch props, it has a maximum speed of 22.3 knots and service speed of 21 knots. Built of aluminium in 2002 by Derecktor Shipyard for the State of Delaware Division of Fish & Wildlife.
Passenger vessel brochure
BMT is an engineering and consulting firm that provides innovative designs and services for vessels across various industries. They have a vast portfolio of passenger vessel designs ranging from small water taxis to large ferries. BMT understands the unique needs of passenger vessel operators and aims to deliver cost-effective and sustainable solutions through experienced engineering, environmental management, and meeting customer expectations.
Wind farm support vessel brochure
BMT is an engineering and consulting firm that provides innovative design services for commercial, leisure, and naval vessels using state-of-the-art technology. They aim to help customers operate in a cost-effective and environmentally responsible manner. BMT has expertise in industries like oil/gas, defense, renewable energy, and maritime transport. They take a holistic approach to deliver high-value solutions from concept to maintenance.
Elizabeth River Ferry
This document provides details on a 15 passenger vessel built in 2016 for the Hampton Road Transit Authority. It is 81.9 feet long overall with a beam of 23 feet and can carry 149 passengers and a crew of 3 at speeds up to 12.5 knots powered by 2 Volvo engines driving 4 propellers. The steel hull vessel was built by Armstrong Marine according to ABS classification society rules for vessels under 90 meters.
BMT- New Vessel Designs for 2016
BMT commissioned its first Vessel Design Portfolio in 2015 showcasing its experience in delivering high-performance ship designs. The portfolio was well received, with shipbuilders using it to promote BMT's proven designs. This positive response led BMT to produce the portfolio annually with growing design capabilities. The letter encourages the reader to share the portfolio and contact BMT about any designs or services. It thanks the reader for their interest in BMT's second edition portfolio.
Ng 964 42m crew boat
This document provides specifications for a 42-meter crew boat and cargo utility vessel. It can carry 75 passengers and a crew of 11, along with 60 tonnes of cargo and has fuel and water capacity of 100,000 and 20,000 liters respectively. Its key features are a length overall of 42 meters, beam of 8 meters, and draught of 1.6 meters. Propulsion comes from 3 CAT C32 main engines at 1450hp each, powering 3 FPP propulsors to provide a top speed of 30 knots when loaded to 35 tonnes deadweight. The hull is constructed of aluminum to Bureau Veritas classification standards for vessels operating at sea up to area 3.
1920's Traditional Styled 600 passenger Tour/Sightseeing Boat
Very traditional styled, but, modern construction sightseeing/tour boat.
28 m turbine transfer vessel
This document provides specifications for a wind farm support vessel. It is 28.1 meters long overall with a beam of 8.5 meters and can carry a maximum deadweight of 18.5 tonnes. It has a crew of 7 and 3 maintenance technicians. Its main engines are 2 x MTU 12V2000M72 totaling 1080 kW of power and it is propelled by 2 x MLP 550DRB waterjets. It can travel at a service speed of 28 knots and has fuel capacity of 500 tonnes and fresh water capacity of 500 litres.
Ng586 catamaran. semi-swath,
The SudilesRoughWaterRo-PaxFerry was launched in 2008. It is 57.8 meters long and can carry 358 passengers, 10 cars, and has a crew of 12. It is powered by 4 MTU 12V 4000 M71 main engines that drive 4 Kamewa 71 SII waterjets through 4 REINTJES VLJ930 gearboxes.
Ng586 57 m rough water cat ro ro ferry
The SudilesRoughWaterRo-PaxFerry was launched in 2008. It is 57.8 meters long and can carry 358 passengers, 10 cars, and has a crew of 12. It is powered by 4 MTU 12V 4000 M71 main engines that drive 4 Kamewa 71 SII waterjets through 4 REINTJES VLJ930 gearboxes.
28 m turbine transfer vessel
This document provides specifications for a wind farm support vessel. It is 28.1 meters long overall with a beam of 8.5 meters and can carry a maximum deadweight of 18.5 tonnes. It has a crew of 7 and 3 maintenance technicians. Its main engines are 2 x MTU 12V2000M72 totaling 1080 kW of power and it is propelled by 2 x MLP 550DRB waterjets. It can travel at a service speed of 28 knots and has fuel capacity of 500 tonnes and fresh water capacity of 500 litres.
BMT Catamaran Development
BMT has developed new hybrid catamaran/SWATH hull designs that offer significantly improved vessel motions in rougher seas compared to conventional high-speed catamarans. These include the MODCAT semi-SWATH design and new eXtreme Semi-Swath (XSS) hull, both aimed at meeting client requirements for passenger comfort while maintaining high speeds. The XSS design in particular combines the motion benefits of SWATH hulls with catamaran speed through the use of waterplane area reduction and active ride control systems.
Maritime Nation; Ferry Safety Worldwide
The document discusses ferry safety worldwide and focuses on accidents in Bangladesh, Indonesia, and the Philippines based on data from 2000-2012. It notes that between 800-1000 people die in ferry accidents each year globally. The US has a very safe ferry system with few accidents, unlike places like Bangladesh where overloading, poor weather conditions, and unseaworthy aging vessels contribute to over 1000 annual ferry fatalities. The document outlines discussions at a ferry safety conference around improving safety culture, vessel design/construction, training, and developing safety standards to help reduce accidents for ferry operators globally.
Gulf Fuel Price: 02/27
Gasoline prices in the Gulf Coast region remain elevated compared to the same time last year. The average price of regular unleaded gasoline is $3.14/gallon in Houston and $3.18/gallon in New Orleans. Diesel prices are also higher than 2021, with Houston at $3.89/gallon and New Orleans at $3.94/gallon.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
More Related Content
More from Ralph Duncan, P.E.
Adventuress- A High Seas Adventure
Article about the Concrete School experience aboard the Schooner Adventuress.
Great Boat for Florida to Cuba
The document provides specifications for an Alaska Marine Highways ferry built in 2004. It is 71.7 meters long and powered by 4 MTU 16V595 Te70 main engines. It can carry 250 passengers, 35 cars weighing 4 tonnes each, and 4 trucks weighing 10 tonnes each, with a service speed of 35 knots and range of 500 nautical miles.
19 m fisheries research vessel v.2
This 19m fisheries research vessel has a length overall of 19m, length of waterline of 17.8m, and beam of 5.3m. It can carry 7 passengers and a crew of 2, with fuel capacity of 2300L, fresh water of 380L, and black water of 380L. Powered by 2 x 478kW Daewoo engines driving fixed pitch props, it has a maximum speed of 22.3 knots and service speed of 21 knots. Built of aluminium in 2002 by Derecktor Shipyard for the State of Delaware Division of Fish & Wildlife.
Passenger vessel brochure
BMT is an engineering and consulting firm that provides innovative designs and services for vessels across various industries. They have a vast portfolio of passenger vessel designs ranging from small water taxis to large ferries. BMT understands the unique needs of passenger vessel operators and aims to deliver cost-effective and sustainable solutions through experienced engineering, environmental management, and meeting customer expectations.
Wind farm support vessel brochure
BMT is an engineering and consulting firm that provides innovative design services for commercial, leisure, and naval vessels using state-of-the-art technology. They aim to help customers operate in a cost-effective and environmentally responsible manner. BMT has expertise in industries like oil/gas, defense, renewable energy, and maritime transport. They take a holistic approach to deliver high-value solutions from concept to maintenance.
Elizabeth River Ferry
This document provides details on a 15 passenger vessel built in 2016 for the Hampton Road Transit Authority. It is 81.9 feet long overall with a beam of 23 feet and can carry 149 passengers and a crew of 3 at speeds up to 12.5 knots powered by 2 Volvo engines driving 4 propellers. The steel hull vessel was built by Armstrong Marine according to ABS classification society rules for vessels under 90 meters.
BMT- New Vessel Designs for 2016
BMT commissioned its first Vessel Design Portfolio in 2015 showcasing its experience in delivering high-performance ship designs. The portfolio was well received, with shipbuilders using it to promote BMT's proven designs. This positive response led BMT to produce the portfolio annually with growing design capabilities. The letter encourages the reader to share the portfolio and contact BMT about any designs or services. It thanks the reader for their interest in BMT's second edition portfolio.
Ng 964 42m crew boat
This document provides specifications for a 42-meter crew boat and cargo utility vessel. It can carry 75 passengers and a crew of 11, along with 60 tonnes of cargo and has fuel and water capacity of 100,000 and 20,000 liters respectively. Its key features are a length overall of 42 meters, beam of 8 meters, and draught of 1.6 meters. Propulsion comes from 3 CAT C32 main engines at 1450hp each, powering 3 FPP propulsors to provide a top speed of 30 knots when loaded to 35 tonnes deadweight. The hull is constructed of aluminum to Bureau Veritas classification standards for vessels operating at sea up to area 3.
1920's Traditional Styled 600 passenger Tour/Sightseeing Boat
Very traditional styled, but, modern construction sightseeing/tour boat.
28 m turbine transfer vessel
This document provides specifications for a wind farm support vessel. It is 28.1 meters long overall with a beam of 8.5 meters and can carry a maximum deadweight of 18.5 tonnes. It has a crew of 7 and 3 maintenance technicians. Its main engines are 2 x MTU 12V2000M72 totaling 1080 kW of power and it is propelled by 2 x MLP 550DRB waterjets. It can travel at a service speed of 28 knots and has fuel capacity of 500 tonnes and fresh water capacity of 500 litres.
Ng586 catamaran. semi-swath,
The SudilesRoughWaterRo-PaxFerry was launched in 2008. It is 57.8 meters long and can carry 358 passengers, 10 cars, and has a crew of 12. It is powered by 4 MTU 12V 4000 M71 main engines that drive 4 Kamewa 71 SII waterjets through 4 REINTJES VLJ930 gearboxes.
Ng586 57 m rough water cat ro ro ferry
The SudilesRoughWaterRo-PaxFerry was launched in 2008. It is 57.8 meters long and can carry 358 passengers, 10 cars, and has a crew of 12. It is powered by 4 MTU 12V 4000 M71 main engines that drive 4 Kamewa 71 SII waterjets through 4 REINTJES VLJ930 gearboxes.
28 m turbine transfer vessel
This document provides specifications for a wind farm support vessel. It is 28.1 meters long overall with a beam of 8.5 meters and can carry a maximum deadweight of 18.5 tonnes. It has a crew of 7 and 3 maintenance technicians. Its main engines are 2 x MTU 12V2000M72 totaling 1080 kW of power and it is propelled by 2 x MLP 550DRB waterjets. It can travel at a service speed of 28 knots and has fuel capacity of 500 tonnes and fresh water capacity of 500 litres.
BMT Catamaran Development
BMT has developed new hybrid catamaran/SWATH hull designs that offer significantly improved vessel motions in rougher seas compared to conventional high-speed catamarans. These include the MODCAT semi-SWATH design and new eXtreme Semi-Swath (XSS) hull, both aimed at meeting client requirements for passenger comfort while maintaining high speeds. The XSS design in particular combines the motion benefits of SWATH hulls with catamaran speed through the use of waterplane area reduction and active ride control systems.
Maritime Nation; Ferry Safety Worldwide
The document discusses ferry safety worldwide and focuses on accidents in Bangladesh, Indonesia, and the Philippines based on data from 2000-2012. It notes that between 800-1000 people die in ferry accidents each year globally. The US has a very safe ferry system with few accidents, unlike places like Bangladesh where overloading, poor weather conditions, and unseaworthy aging vessels contribute to over 1000 annual ferry fatalities. The document outlines discussions at a ferry safety conference around improving safety culture, vessel design/construction, training, and developing safety standards to help reduce accidents for ferry operators globally.
Gulf Fuel Price: 02/27
Gasoline prices in the Gulf Coast region remain elevated compared to the same time last year. The average price of regular unleaded gasoline is $3.14/gallon in Houston and $3.18/gallon in New Orleans. Diesel prices are also higher than 2021, with Houston at $3.89/gallon and New Orleans at $3.94/gallon.
More from Ralph Duncan, P.E. (20)
1920's Traditional Styled 600 passenger Tour/Sightseeing Boat
1920's Traditional Styled 600 passenger Tour/Sightseeing Boat
Recently uploaded
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Infrastructure Challenges in Scaling RAG with Custom AI models
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Recently uploaded (20)
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Infrastructure Challenges in Scaling RAG with Custom AI models
Infrastructure Challenges in Scaling RAG with Custom AI models
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
NEW 40 knot, 13m Patrol Boat
- 1. SMITFastPatrolBoat Owner Builder Year Launched SMIT Alnmaritec Ltd. 2012 : : : Length Overall Length Waterline Beam (Max) Hull Draught 13.2 metres 10.8 metres 4.2 metres 0.7 metres Principal Particulars Deadweight Crew Passengers Fuel Total Deadweight 2 6 1700 litres 2.3 tonnes Propulsion Machinery Main Engines Waterjets 2 x Cummins QSC 600hp 2 x Rolls-Royce A32 Performance and Range Speed @ 85% MCR 40 knots Classification Lloyds SSC UK MCA Workboat Code - Category 3
- 2. BMT Nigel Gee Ltd Shamrock Quay William Street Southampton SO14 5QL +44 2380 226655 +44 2380 228855 admin@ngal.co.uk www.ngal.co.uk Tel: Fax: Website: Email: SMITFastPatrolBoat NG 792