This document provides a CV for Gary Dodson, a welding inspector and supervisor with over 35 years of experience in welding inspection, supervision, and welding. He has extensive qualifications and certifications in welding inspection and safety. He has worked on a wide range of projects in various industries and locations, both in the UK and abroad, with experience in pipe welding, structural welding, and boiler and ship repair work. His most recent role has been as a supervisor and inspector for the Robin Rigg offshore wind farm project in Cumbria.
The document appears to be renovation plans for an interior space called the 510 Groveland Building. It includes floor plans labeled as "Previous" and "Revised" as well as images of a "Previous Kitchen" and "Revised Kitchen" with the renovation designed by Laurel Ulland Architecture in 2008.
Brian Timpson's curriculum vitae provides details of his experience as a deck foreman and rigging supervisor over 35 years. It lists his qualifications, medical certifications, safety training, offshore experience on numerous oil rigs and vessels in locations around the world, and onshore experience in refineries and industrial plants. The CV details his contact information, licenses, inoculations, and extensive experience planning and overseeing rigging operations.
Geoff Matthews is a boilermaker/welder with over 20 years of experience in fabrication and welding projects throughout Australia and New Zealand. He has worked on mines, power plants, pipelines, and other industrial projects. Matthews has extensive qualifications and certifications in welding, confined spaces, working at heights, and other safety training. He is focused on quality and safety and has a history of working successfully as part of a team.
This document contains the resume of Geoff Matthews, including his qualifications, employment history, and references. Matthews has over 25 years of experience as a boilermaker, welder, and welding inspector working on projects throughout Australia and New Zealand in various industries such as mining, power, oil and gas, pulp and paper. His most recent roles include working for Laing O'Rourke/Piping Solutions on the APLNG Orana Site since 2014 and for Bechtel on the QCLNG Plant on Curtis Island, Qld from 2013 to 2014.
David Fleming is a qualified rigger and LOLER competent person with over 20 years of experience in various industries including oil and gas, power, petrochemical, steel, cement, and mining. He has worked on projects such as oil rigs, FPSOs, vessels, power stations, refineries, and stadium construction. Fleming considers himself a very competent, hard working, safety-conscious individual.
Kenny Taylor is a piping chargehand/supervisor with 18 years of experience in fabrication, installation, testing, completion and commissioning of pipework systems. He is currently supervising day to day maintenance and repair at the ExxonMobil plant in Mossmorran. He has qualifications in Exxon's PTW systems and provides safety information and organizes work teams.
This document provides an overview of the BLACKBIRD concept, which is a hybrid floating offshore wind turbine and wave energy converter system. The key elements discussed include a vertical axis wind turbine, uniaxial submerged tension leg buoy float, linear magnetic geared interior permanent magnet generator, integrated power takeoff units, single vertical damped tether, subsea ball and taper connector, subsea concrete storage and electrolysis unit, and seabed rock anchored foundation template. The document also discusses challenges with existing offshore wind technologies and the potential benefits of the BLACKBIRD concept.
This document describes the development of Malaysia's first satellite remote chilled water storage system for district cooling. The system was built at Gas District Cooling's PJP4 plant in Putrajaya to store up to 100,000 tons of chilled water generated from the existing PJP2 plant during off-peak hours. The 45-meter diameter concrete tank, one of the largest in the world, helps meet peak cooling demand while reducing electrical imports and carbon emissions by 43% compared to operating electric chillers alone. Performance monitoring shows the stratified storage system operates as designed with a thin thermocline and high efficiency.
The document appears to be renovation plans for an interior space called the 510 Groveland Building. It includes floor plans labeled as "Previous" and "Revised" as well as images of a "Previous Kitchen" and "Revised Kitchen" with the renovation designed by Laurel Ulland Architecture in 2008.
Brian Timpson's curriculum vitae provides details of his experience as a deck foreman and rigging supervisor over 35 years. It lists his qualifications, medical certifications, safety training, offshore experience on numerous oil rigs and vessels in locations around the world, and onshore experience in refineries and industrial plants. The CV details his contact information, licenses, inoculations, and extensive experience planning and overseeing rigging operations.
Geoff Matthews is a boilermaker/welder with over 20 years of experience in fabrication and welding projects throughout Australia and New Zealand. He has worked on mines, power plants, pipelines, and other industrial projects. Matthews has extensive qualifications and certifications in welding, confined spaces, working at heights, and other safety training. He is focused on quality and safety and has a history of working successfully as part of a team.
This document contains the resume of Geoff Matthews, including his qualifications, employment history, and references. Matthews has over 25 years of experience as a boilermaker, welder, and welding inspector working on projects throughout Australia and New Zealand in various industries such as mining, power, oil and gas, pulp and paper. His most recent roles include working for Laing O'Rourke/Piping Solutions on the APLNG Orana Site since 2014 and for Bechtel on the QCLNG Plant on Curtis Island, Qld from 2013 to 2014.
David Fleming is a qualified rigger and LOLER competent person with over 20 years of experience in various industries including oil and gas, power, petrochemical, steel, cement, and mining. He has worked on projects such as oil rigs, FPSOs, vessels, power stations, refineries, and stadium construction. Fleming considers himself a very competent, hard working, safety-conscious individual.
Kenny Taylor is a piping chargehand/supervisor with 18 years of experience in fabrication, installation, testing, completion and commissioning of pipework systems. He is currently supervising day to day maintenance and repair at the ExxonMobil plant in Mossmorran. He has qualifications in Exxon's PTW systems and provides safety information and organizes work teams.
This document provides an overview of the BLACKBIRD concept, which is a hybrid floating offshore wind turbine and wave energy converter system. The key elements discussed include a vertical axis wind turbine, uniaxial submerged tension leg buoy float, linear magnetic geared interior permanent magnet generator, integrated power takeoff units, single vertical damped tether, subsea ball and taper connector, subsea concrete storage and electrolysis unit, and seabed rock anchored foundation template. The document also discusses challenges with existing offshore wind technologies and the potential benefits of the BLACKBIRD concept.
This document describes the development of Malaysia's first satellite remote chilled water storage system for district cooling. The system was built at Gas District Cooling's PJP4 plant in Putrajaya to store up to 100,000 tons of chilled water generated from the existing PJP2 plant during off-peak hours. The 45-meter diameter concrete tank, one of the largest in the world, helps meet peak cooling demand while reducing electrical imports and carbon emissions by 43% compared to operating electric chillers alone. Performance monitoring shows the stratified storage system operates as designed with a thin thermocline and high efficiency.
This resume is for Chee Sang Woon, an electrical/electronic supervisor with over 30 years of experience. He holds a diploma in electrical and electronic engineering and has completed numerous technical courses. His experience includes working as a chief electrician and electrician on offshore drilling rigs and ships, maintaining electrical systems, drilling equipment, cranes and more. Currently he works as an electrical/electronic supervisor on Pacific Drilling's drill ship Pacific Khamsin.
ALEX CLARK is a semi-skilled pipefitter with over 20 years of experience working in mechanical engineering projects across various sectors in the UK and abroad, including nuclear, oil and gas. He has completed 60% of his NVQ3 qualification and provides details of his employment history working for numerous companies on maintenance, construction, and shutdown projects involving pipefitting. His resume includes his education, training, and references.
Gordon Adamson provides a curriculum vitae summarizing his 53 years of experience working as a senior welding inspector, NDT supervisor, NDT technician, and ultrasonic rail flaw detector operator in various industries throughout the UK and overseas. Over the past 32 years, he has gained qualifications and certifications in welding inspection, NDT techniques including ultrasonic, radiographic, and magnetic particle testing. His career history details his extensive experience with inspection and NDT work on infrastructure, offshore oil and gas, wind and nuclear projects.
Alistair Lamont has over 40 years of experience as a mixed gas diver and supervisor. He has worked on numerous offshore oil and gas projects worldwide since 1977. He holds several certifications including hyperbaric welding inspector, NDT inspector, and mixed gas supervisor. His most recent roles have included dive supervisor positions in Southeast Asia, the Middle East, and the North Sea working on manifold installations, pipeline repairs, and wellhead replacements.
This document provides a summary of Andrew Davis's qualifications, experience, and personal statement for employment. It includes his contact information, date of birth, driving license and references. His qualifications include certificates in confined spaces, jetting, safety, and welding from 2010 to 2013. His employment history details various roles from 2011 to present in industries including oil/gas, chemical, and facilities maintenance, performing tasks such as high pressure jetting, industrial cleaning, and confined space entry. His personal statement expresses a desire to gain more skills and qualifications within these industries, with a focus on safety.
Raymond Carroll has over 40 years of experience as a painter, blaster, and sprayer working on offshore oil rigs and platforms. He has extensive qualifications and certifications in areas such as firefighting, safety, and coatings application. His career has involved numerous roles with companies such as Cape Offshore, BP, and Shell, where he has supervised coating projects.
Darren Vasey has over 20 years of experience as a pipe fitter and piping supervisor. He has worked on numerous projects in industries such as oil refining, chemical plants, and offshore oil rigs. His resume details his educational background in pipework systems and certifications, as well as his employment history managing piping projects and teams. References are available upon request.
Stephen Adams has over 20 years of experience as a highly competent electrician and supervisor. He is fully qualified to the latest BS 7671 standards and has experience testing to 2391 certification. He has worked on many industrial and commercial projects including Crossrail, Heathrow Airport, and Canary Wharf, supervising up to 18 electricians. He maintains up to date qualifications and safety training.
Mark Hudspeth is a pipe fitter with over 25 years of experience working in various industries including petrochemical, gas, construction, and steel. He has worked on offshore platforms and vessels, as well as land-based sites. He has extensive safety training and qualifications in pipe fitting skills such as welding, fabrication, and installation of various pipe materials. References are available upon request.
This document is the curriculum vitae of Stephen Carr, an electrician born in 1972. It outlines his qualifications and experience, which include over 20 years of electrical installation, maintenance, and safety work in nuclear sites. It also lists his employment history, working for various electrical contracting companies on both domestic and industrial projects. References are provided from his most recent employers.
This document contains a resume and cover letter from Allan Dick Estera, a Filipino citizen seeking work as a foreman rigger. It summarizes his work experience from 2005 to present in rigging roles for various oil and gas projects in Saudi Arabia, including loading and erecting pipes, valves, transformers, and other equipment. It also lists his educational background graduating with degrees in marine transportation and engineering. A certification letter from his current employer Mohammad Al Mojil Group endorses his competence, dedication, and satisfactory performance as a foreman rigger.
Kennedy Morrison provides his contact information and resume. He has experience working in various roles including roustabout, AB seaman, deckcrew, and crane operator. His experience includes working on DSVs, ferries, and pipe laying ships. He lists the various certifications and training he has completed, such as offshore emergency training, medical certifications, crane operation stages 1-3, and others.
TDW Innovations™ Magazine July - September 2014
Cover Story: A Tale as Big as Texas
With increasing regulation, operators work to overcome the shared challenges of the Eagle Ford Shale play.
New Connections: Europe Reaches for Energy Security
To ensure against fluctuations in geopolitics, many European countries are driving toward more stable energy supplies and the infrastructure needed to support them.
US6100222 High density, viscosified aqueous compositions having superior stab...Dan Vollmer
This patent describes high density, viscosified aqueous compositions that maintain their viscosity under stress conditions such as aging, heat, agitation, and shear. The compositions comprise water, a water-soluble or water-dispersible polymer to increase viscosity, a mixture of two or more cations such as lithium, sodium, potassium, and calcium, and a mixture of two or more anions such as chloride, bromide, iodide, and formate. The mixed salt systems exhibit greater viscosity stability compared to single salt systems of similar densities. The compositions have applications in drilling, completion, fracturing, and other well operations.
This curriculum vitae summarizes Paul Watling's career in thermal insulation engineering spanning over 33 years. It details his roles and responsibilities in insulation supervision, quality assurance, quality control management, and multi-discipline management on various oil, gas, and petrochemical projects in locations like Scotland, Australia, and the Middle East. The CV also lists his qualifications, trade education, employment history, locations worked, and duties at each role.
Dan E. Marsden is a British commercial air diver with over 10 years of experience in underwater inspection, maintenance, construction and salvage projects. He has worked on offshore wind farms, water infrastructure projects, and salvage operations. Marsden holds professional certifications in commercial diving, welding, first aid and offshore safety. He has experience managing diving teams and projects.
This document summarizes a presentation on offshore wind energy given by Dr. C. R. Golightly. It discusses the history of wind energy and development of offshore wind farms. It notes that initial offshore wind farms were located in shallow waters near coastlines, but that floating wind turbines have potential to access much larger wind resources further from shore. The document also covers different types of foundations for offshore turbines and the need for innovation to reduce costs and increase efficiency of offshore wind energy production.
This curriculum vitae summarizes J.E. Gregg Jr.'s career history and qualifications. He has over 38 years of experience working in the drilling industry, including 9 years as a drilling supervisor. He has worked on land rigs and offshore jack-up rigs and barges around the world, including in the USA, Papua New Guinea, Nigeria, Kuwait, Russia, Sweden, and Kazakhstan. He has extensive experience managing drilling operations and safety programs.
This curriculum vitae summarizes J.E. Gregg Jr.'s career history and qualifications. He has over 38 years of experience working in the drilling industry, including 9 years as a drilling supervisor. He has worked on land rigs and offshore jack-up rigs and barges in locations around the world, including the USA, Papua New Guinea, Nigeria, Kuwait, Russia, and Sweden. He has extensive experience managing drilling operations and safety on horizontal, directional, and high pressure gas wells up to 19,000 feet deep.
David Golding is a senior electrician with over 30 years of experience, including 4 years as a lead electrician on offshore drilling rigs in Angola and Brazil. He has extensive knowledge and skills in areas such as electrical installations, generators, UPS systems, HVAC, supervision, risk assessment, and maintenance. He is capable, versatile, self-motivated and committed to safety. He has relevant certifications and training.
This resume is for Chee Sang Woon, an electrical/electronic supervisor with over 30 years of experience. He holds a diploma in electrical and electronic engineering and has completed numerous technical courses. His experience includes working as a chief electrician and electrician on offshore drilling rigs and ships, maintaining electrical systems, drilling equipment, cranes and more. Currently he works as an electrical/electronic supervisor on Pacific Drilling's drill ship Pacific Khamsin.
ALEX CLARK is a semi-skilled pipefitter with over 20 years of experience working in mechanical engineering projects across various sectors in the UK and abroad, including nuclear, oil and gas. He has completed 60% of his NVQ3 qualification and provides details of his employment history working for numerous companies on maintenance, construction, and shutdown projects involving pipefitting. His resume includes his education, training, and references.
Gordon Adamson provides a curriculum vitae summarizing his 53 years of experience working as a senior welding inspector, NDT supervisor, NDT technician, and ultrasonic rail flaw detector operator in various industries throughout the UK and overseas. Over the past 32 years, he has gained qualifications and certifications in welding inspection, NDT techniques including ultrasonic, radiographic, and magnetic particle testing. His career history details his extensive experience with inspection and NDT work on infrastructure, offshore oil and gas, wind and nuclear projects.
Alistair Lamont has over 40 years of experience as a mixed gas diver and supervisor. He has worked on numerous offshore oil and gas projects worldwide since 1977. He holds several certifications including hyperbaric welding inspector, NDT inspector, and mixed gas supervisor. His most recent roles have included dive supervisor positions in Southeast Asia, the Middle East, and the North Sea working on manifold installations, pipeline repairs, and wellhead replacements.
This document provides a summary of Andrew Davis's qualifications, experience, and personal statement for employment. It includes his contact information, date of birth, driving license and references. His qualifications include certificates in confined spaces, jetting, safety, and welding from 2010 to 2013. His employment history details various roles from 2011 to present in industries including oil/gas, chemical, and facilities maintenance, performing tasks such as high pressure jetting, industrial cleaning, and confined space entry. His personal statement expresses a desire to gain more skills and qualifications within these industries, with a focus on safety.
Raymond Carroll has over 40 years of experience as a painter, blaster, and sprayer working on offshore oil rigs and platforms. He has extensive qualifications and certifications in areas such as firefighting, safety, and coatings application. His career has involved numerous roles with companies such as Cape Offshore, BP, and Shell, where he has supervised coating projects.
Darren Vasey has over 20 years of experience as a pipe fitter and piping supervisor. He has worked on numerous projects in industries such as oil refining, chemical plants, and offshore oil rigs. His resume details his educational background in pipework systems and certifications, as well as his employment history managing piping projects and teams. References are available upon request.
Stephen Adams has over 20 years of experience as a highly competent electrician and supervisor. He is fully qualified to the latest BS 7671 standards and has experience testing to 2391 certification. He has worked on many industrial and commercial projects including Crossrail, Heathrow Airport, and Canary Wharf, supervising up to 18 electricians. He maintains up to date qualifications and safety training.
Mark Hudspeth is a pipe fitter with over 25 years of experience working in various industries including petrochemical, gas, construction, and steel. He has worked on offshore platforms and vessels, as well as land-based sites. He has extensive safety training and qualifications in pipe fitting skills such as welding, fabrication, and installation of various pipe materials. References are available upon request.
This document is the curriculum vitae of Stephen Carr, an electrician born in 1972. It outlines his qualifications and experience, which include over 20 years of electrical installation, maintenance, and safety work in nuclear sites. It also lists his employment history, working for various electrical contracting companies on both domestic and industrial projects. References are provided from his most recent employers.
This document contains a resume and cover letter from Allan Dick Estera, a Filipino citizen seeking work as a foreman rigger. It summarizes his work experience from 2005 to present in rigging roles for various oil and gas projects in Saudi Arabia, including loading and erecting pipes, valves, transformers, and other equipment. It also lists his educational background graduating with degrees in marine transportation and engineering. A certification letter from his current employer Mohammad Al Mojil Group endorses his competence, dedication, and satisfactory performance as a foreman rigger.
Kennedy Morrison provides his contact information and resume. He has experience working in various roles including roustabout, AB seaman, deckcrew, and crane operator. His experience includes working on DSVs, ferries, and pipe laying ships. He lists the various certifications and training he has completed, such as offshore emergency training, medical certifications, crane operation stages 1-3, and others.
TDW Innovations™ Magazine July - September 2014
Cover Story: A Tale as Big as Texas
With increasing regulation, operators work to overcome the shared challenges of the Eagle Ford Shale play.
New Connections: Europe Reaches for Energy Security
To ensure against fluctuations in geopolitics, many European countries are driving toward more stable energy supplies and the infrastructure needed to support them.
US6100222 High density, viscosified aqueous compositions having superior stab...Dan Vollmer
This patent describes high density, viscosified aqueous compositions that maintain their viscosity under stress conditions such as aging, heat, agitation, and shear. The compositions comprise water, a water-soluble or water-dispersible polymer to increase viscosity, a mixture of two or more cations such as lithium, sodium, potassium, and calcium, and a mixture of two or more anions such as chloride, bromide, iodide, and formate. The mixed salt systems exhibit greater viscosity stability compared to single salt systems of similar densities. The compositions have applications in drilling, completion, fracturing, and other well operations.
This curriculum vitae summarizes Paul Watling's career in thermal insulation engineering spanning over 33 years. It details his roles and responsibilities in insulation supervision, quality assurance, quality control management, and multi-discipline management on various oil, gas, and petrochemical projects in locations like Scotland, Australia, and the Middle East. The CV also lists his qualifications, trade education, employment history, locations worked, and duties at each role.
Dan E. Marsden is a British commercial air diver with over 10 years of experience in underwater inspection, maintenance, construction and salvage projects. He has worked on offshore wind farms, water infrastructure projects, and salvage operations. Marsden holds professional certifications in commercial diving, welding, first aid and offshore safety. He has experience managing diving teams and projects.
This document summarizes a presentation on offshore wind energy given by Dr. C. R. Golightly. It discusses the history of wind energy and development of offshore wind farms. It notes that initial offshore wind farms were located in shallow waters near coastlines, but that floating wind turbines have potential to access much larger wind resources further from shore. The document also covers different types of foundations for offshore turbines and the need for innovation to reduce costs and increase efficiency of offshore wind energy production.
This curriculum vitae summarizes J.E. Gregg Jr.'s career history and qualifications. He has over 38 years of experience working in the drilling industry, including 9 years as a drilling supervisor. He has worked on land rigs and offshore jack-up rigs and barges around the world, including in the USA, Papua New Guinea, Nigeria, Kuwait, Russia, Sweden, and Kazakhstan. He has extensive experience managing drilling operations and safety programs.
This curriculum vitae summarizes J.E. Gregg Jr.'s career history and qualifications. He has over 38 years of experience working in the drilling industry, including 9 years as a drilling supervisor. He has worked on land rigs and offshore jack-up rigs and barges in locations around the world, including the USA, Papua New Guinea, Nigeria, Kuwait, Russia, and Sweden. He has extensive experience managing drilling operations and safety on horizontal, directional, and high pressure gas wells up to 19,000 feet deep.
David Golding is a senior electrician with over 30 years of experience, including 4 years as a lead electrician on offshore drilling rigs in Angola and Brazil. He has extensive knowledge and skills in areas such as electrical installations, generators, UPS systems, HVAC, supervision, risk assessment, and maintenance. He is capable, versatile, self-motivated and committed to safety. He has relevant certifications and training.
1. C.V. GARY DODSON
WELDING INSPECTOR/SUPERVISOR
30 LOCKE RD, DODWORTH, BARNSLEY, S. YORK’S. S75 3QH
garydodson49@hotmail.co.uk
07970 946647
TRAINING/EXPERIENCE
CSWIP 3.1 WELDING INSPECTOR… No. 669395
TWI REGISTERED WELDING INSPECTOR… No. R/88653
C.C.S.N.G. SAFETY PASSPORT.
U.K. RENEWABLE/ GLOBAL WIND ORGANISATION
Marine Safety Training – Vessel Transfer & Transit (MST).177484 No. 5550879 Exp. 26.11.2016
GWO Sea Survival. No. 5550879 Exp. 26.11.2018
Confined Space Entry (Escape B.A.) No. 177478 Exp. 04.11.2017
Working at Height & Rescue Training – Wind Turbines. No. 177254 Exp. 03.11.2016
RUK- GWO First Aid. No. 177484 Exp. 13.11.2016
Medical Fitness to Work. Cert.No. OMS/RUK/0001 Exp. 06.11.2016
AFTER FINISHING MY APPRENTICESHIP I HAVE GAINED QUITE CONSIDERABLE EXPERIENCE AND KNOWLEDGE
OF WELDING PROCESSES AND TECHNIQUES, MAINLY USED ON PIPEWELDING TO X-RAY STANDARD. I HAVE
WORKED ON-SHORE / OFFSHORE, WIND TURBINES, POWERSTATIONS, INCINERATOR PLANTS, OIL & GAS,
PETRO-CHEMICAL, CHEMICAL, WATER TREATMENT, FOOD PROCESSING, SHIPS BOILERS, IN VARIOUS
LOCATIONS, UK, EUROPE & WORLDWIDE. AFTER 35 YEARS OF WELDING I HAVE NOW MOVED INTO
INSPECTION / SUPERVISION. I AM QUITE COMFORTABLE WORKING ON MY OWN OR IN A TEAM WHERE I
CAN OFFER MY KNOWLEDGE AND EXPERIENCE. I ALSO HAVE MY OWN INSPECTION/WELDING COMPANY.
PROJECTS WORKED ON.
UK
ROBIN RIGG WIND FARM REPAIR WORK (OFFSHORE) CUMBRIA. SUPERVISOR/INSPECTOR… ALSTOM
COTTAM POWERSTATION, SHUTDOWN… MULTI-CODED WELDER… ALSTOM
FERRYBRIDGE, DRAX, EGGBOROUGH. SHUTDOWNS… MULTI-CODED WELDER… DOOSAN
2. GRANGE MOUTH, CORYTON, PETRO-CHEMICAL. MULTI-CODED WELDER... JACOBS.
INCINERATOR PLANT, NEW BUILD, SHEFFIELD. MULTI-CODED WELDER… P.J.DOUGLAS.
POWERSTATIONS, PETRO-CHEMICAL, VARIOUS SITES, CODED WELDER… T.E.I.
ABERTHAW POWER STATION. FOREMAN/WELDER… FRANKLYN YATES.
TEXACO REFINERY, MILFORD HAVEN. SHUTDOWN… LEDWOODS.
ABROAD
SHIPS REPAIR, TEXAS, CAMAROON, HONK KONG, SINGAPORE, VIETNAM, KOREA… WELDER… T.E.I.
HAUGESUND, SHIP REFURBISHMENT, NORWAY…WELDER… WESTPIPING A/S
KOLSNES REFINERY, EXPANSION PROJECT, NORWAY… WELDER… STATOIL.
VLISSINGEN, PLATFORM NEW BUILDS, HOLLAND… WELDER… MURRAY BASE LTD.
NEW BUILD PAPER MILL, AUSTRALIA… WELDER… D.M.E. Eng. SERVICES.
LEUNA REFINARY NEW BUILD, GERMANY… WELDER… SPECIAL ESUNDMONTAGE WEIMAR.
REFINERY, INSTALLING NEW PIPEWORK, BELGIUM… WELDER… MARK TRACE LTD.
CONTRACTS/PROJECTS OVER LAST15 YEARS
CURRENT POSITION: JAN 2015 – PRESENT
ALSTOM POWER
SUPERVISOR/QC INSPECTOR… ROBIN RIGG WIND FARM PROJECT (OFFSHORE) CUMBRIA, CARRYING OUT
REPAIR WORK TO THE TURBINES, ALSO SAFETY CHECKS, WELD AUDITS CHECKING CONSUMABLES, WPS
PERAMATERS ETC. INSPECTING FIT UPS AND FINAL VISUAL WELD INSPECTION. THEN LIASE WITH NDT FOR
FINAL MPI AND ULTRASONIC TESTING.
ALSTOM POWER JULY 2014 – JAN 2015
MULTI CODED WELDER… BOILER REFURBISHMENT AT COTTAM & WEST BURTON POWER STATIONS BUTT
WELDING CARBON, CrMo AND 316 S/S PIPEWORK USING T.I.G. & M.M.A. RANGING FROM 1” TO 10”
DOOSAN BABCOCKMAY 2014 – JULY 2014
MULTI CODED WELDER… BOILER REFURBISHMENT AT FERRY BRIDGE, EGGBOROUGH, DRAX POWER
STATIONS. BUTT WELDING CARBON, CrMo, S/S PIPE WORK RANGING FROM 1” TO 24” USING T.I.G. &
M.M.A.
3. JACOBS MARCH 2014 – APRIL 2014
MULTI CODED WELDER… INSTALLING NEW PIPE WORK AT GRANGE MOUTH REFINERY. USING T.I.G. &
M.M.A.
T.E.I. FEB 2014 – MARCH 2014
MULTI CODED WELDER… WELDING DUPLEX HEAT EXCHANGERS AT A FAB SHOP IN SHEFFIELD USING T.I.G. &
M.M.A
JACOBS AUG 2013 – DEC 2013
MULTI CODED WELDER… RENEWING FUEL LINES AT CORYTON REFINERY PIPES RANGING FROM 2” TO 24”
USING T.I.G. & M.M.A.
P.J.DOUGLAS FEB 2013 – AUG 2013
MULTI CODED WELDER… ON A NEW BUILD INCINERATOR PLANT IN SHEFFIELD. THIS WAS BUTT WELDING
PIPES FROM 1” TO 12” USING T.I.G. & M.M.A.
T.E.I. SEP 2012 – FEB 2013
MULTI CODED WELDER… THIS WAS WELDING 6” & 8” PIPE WORK FOR THE BIO-MASS PLANT AT DRAX
POWER STATION. THIS WAS USING S.T.T. & F.C.A.W. PROCESSES. ALSO WORKING AT PEMBROKE REFINERY
THIS WAS INSTALLING 2% CrMo BOILER TUBES USING T.I.G.
DOOSAN BABCOCKFEB 2012 – SEP 2012
MULTI CODED WELDER… BOILER REFURBISHMENT AT FERRY BRIDG, DRAX, STALLINBRO, POWER STATIONS.
WELDING PIPES 2” TO 24” USING T.I.G. & M.M.A.
CAMERONS DEC 2011 – MAR 2012
CODED WELDER… AT CAMERONS I WAS WELDING STAINLESS, DUPLEX AND INCONNEL HEAVY WALL PIPES
ATTACHED TO VALVES. THIS WAS FOR THE OFF SHORE DRILLING INDUSTRY, SENT TO VARIOUS SITES
AROUND THE WORLD. THIS WAS USING T.I.G. & M.M.A.
4. DOOSAN BABCOCKAPR2011 – NOV 2011
MUTI CODED WELDER… BOILER REFURBISHMENT AT FERRY BRIDGE, EGGBOROUGH, DRAX POWER
STATIONS. WELDING PIPES 2” TO 24” USING T.I.G. & M.M.A.
T.E.I. APR 2009 – APR 2011
MULTI CODED WELDER… VARIOUS POWER STATIONS AND INSINERATOR PLANTS AROUND THE UK AND
EUROPE. BUTT WELDING PIPE WORK RANGING FRROM 2” TO 36” USING T.I.G. & M.M.A.
FRANKLYN YATES MAY 2006 – MAR 2009 / MAR 2004 – SEP 2004
FOREMAN/WELDER… REPLACING SKIN CASING ON BOILER 2 AT ABERTHAW POWER STATION. THIS WAS
WELDED BY M.I.G. ALSO ON VARIOUS WATER TREATMENT PLANTS AROUND THE UK. REPLACING OLD CAST
PIPE WORK WITH NEW S/STEEL FROM 3” TO 30” USING T.I.G.
EMEG LTD. JUL 2005 – JAN 2006
CODED WELDER… RENEWING DIESEL FUEL LINES AT THE NETWORK RAIL DEPOT IN PLYMOUTH, 3” & 6”
CARBON PIPES USING T.I.G. & M.M.A.
DWS LTD. OCT 2004 – JUN 2005
FOREMAN/WELDER… REPLACING DUCTING AT EGGBOROUGH, RADCLIFFE POWERSTATIONS. THIS WAS
USING M.M.A. & M.I.G. WELDING.
T.E.I. MARINELTD. MAY 2001 – SEP 2004
MULTI CODED WELDER… REPAIR WORK ON SHIPS BOILERS/ECONOMISERS, THIS WAS PIPE AND
STRUCTURAL WELDING, AND WE WERE SENT TO VARIOUS SITES AROUND THE WORLD.
UCL LTD. OCT 2000 – FEB 2001
FOREMAN/WELDER… WORKING IN THE SHIP YARD IN HAMBURG. THIS WAS WORKING ON AN
EXPLORATION VESSEL. WE WERE STRENGTHENING SOME S/STEEL TANKS ONBOARD THIS WAS BY M.M.A.