Muhammad Fikri bin Mohd Noor is applying for a job and provides his personal details, education history, work experience, skills, and references. He has a Bachelor's Degree in Geomatic Engineering and over 5 years of experience as a surveyor. His experience includes deformation and integrity surveys for oilfields. He is proficient in various surveying software and is seeking to improve his technical and soft skills through work experience.
WHO SHOULD ATTEND?
Technicians, engineers, and researchers.
Decision makers, policy makers, and managers.
INTRODUCTION
This course focuses on the major process technologies used in fabrication of integrated circuits (ICs), discrete, and other semiconductor devices, which includes light emitting diodes (LEDs). Each topic covers important scientific aspects of wafer processing steps, which include crystal growth and wafer preparation, crystal defects and purification techniques, contamination control, oxidation, diffusion, ion implantation, lithography, thin film deposition technology, etching, metallization, process integration, electronic packaging and yield.
LEARNING OUTCOMES
Upon completion of this course, participants will be able to:
i. Explain processes of developing semiconductor devices with various architectures.
ii. Understand types of operations sequence in fabricating a typical device.
iii. Calculate important parameters applicable to different individual process steps.
iv. Distinguish and compare different types of techniques used in different individual process steps.
v. Propose and design a simple semiconductor-device fabrication process flow.
WHO SHOULD ATTEND?
Technicians, engineers, and researchers.
Decision makers, policy makers, and managers.
INTRODUCTION
This course focuses on the major process technologies used in fabrication of integrated circuits (ICs), discrete, and other semiconductor devices, which includes light emitting diodes (LEDs). Each topic covers important scientific aspects of wafer processing steps, which include crystal growth and wafer preparation, crystal defects and purification techniques, contamination control, oxidation, diffusion, ion implantation, lithography, thin film deposition technology, etching, metallization, process integration, electronic packaging and yield.
LEARNING OUTCOMES
Upon completion of this course, participants will be able to:
i. Explain processes of developing semiconductor devices with various architectures.
ii. Understand types of operations sequence in fabricating a typical device.
iii. Calculate important parameters applicable to different individual process steps.
iv. Distinguish and compare different types of techniques used in different individual process steps.
v. Propose and design a simple semiconductor-device fabrication process flow.
1. MUHAMMAD FIKRI BIN MOHD NOOR
No. 27, Jalan Berlian, Taman Batu 3,
40150 Shah Alam, Selangor Darul Ehsan.
E-mail : mfikri0106@gmail.com
Phone no. : 019-7523932
OBJECTIVES
i. To apply for a job in a well-established company
ii. To gain experience in the workforce
iii. To improve oneself in both technical and soft skill
iv. To apply the knowledge gain in study for work
PERSONAL INFORMATION
NRIC : 890601-10-5607
Date of Birth : 01 June 1989
Age : 24 Years Old
Gender : Male
Marital Status : Single
Place of Birth : Seksyen 6, Shah Alam
Race : Islam
National : Malaysian
Availability : 1 Month Notice
EDUCATION
Highest Level Academic Qualification
Level : Bachelor Degree
Field of Study : Geomatic Engineering
Major : Faculty of Geoinformation and Real Estates
Grade : CGPA 3.17
Institution : Universiti Teknologi Malaysia
Location : Skudai, Johor Darul Takzim
Graduate : December 2013
2. 2nd
Highest Level Academic Qualification
Level : Matriculation
Field of Study : Physical Science
Major : -
Grade : CGPA 2.65
Institution : Malacca Matriculation College
Location : Malacca
Graduate : April 2008
3rd
Highest Level Academic Qualification
Level : SPM
Field of Study : Science
Grade : 4A 4B1C 1D
Institution : Sekolah Menengah Seksyen 11 (PROJEK)
Location : Shah Alam, Selangor
Graduate : December 2006
FINAL YEAR PROJECT
Thesis title: The trend analysis of MyRTKnet movement using Bernese version 5.0
(Period Jan 2008, Jan 2009 and Jan 2010)
Group project title: Reverse-Real Time Kinematic (RRTK)
WORK EXPERIENCE
April 2014 – until now : Junior Surveyor at
Hurricane Geo Inspection Survey Sdn. Bdn.
http://www.hgis.com.my
Business Suite 19A-31-1, Wisma UOA Centre,
No. 19 Jalan Pinang, Wilayah Persekutuan,
Kuala Lumpur 50450, Malaysia.
Mac 2014 – April 2014 : Field Technician at
GEOINFO Services Sdn. Bdn.
http://www.geoinfo.com.my
No. 31, Jalan Bandar 2, Taman Melawati,
53100 Kuala Lumpur, Malaysia.
July 2013 – August 2013 : Skim Pelajar Bekerja (Research Assistance) at
Faculty of Geoinformation and Real Estates
UTM, Skudai.
January 2011 – February 2011 : Industrial Training at
Jurukur Kembara,
Batu Caves, Selangor Darul Ehsan.
3. March 2011 – April 2011 : Industrial Training at
Jabatan Ukur dan Pemetaan Malaysia (JUPEM)
Jalan Semarak, Kuala Lumpur.
June 2008 – July 2008 : Part Timer at
Toys R Us Malaysia
Subang Jaya Branch
January 2006 – June 2006 : Part Timer at
Hush Puppies Malaysia
Subang Jaya Branch
STRENGTHS AND SKILLS
Strengths
Able to work as a team or independently
Willing to learn new things
Able to work in a challenging and dynamic environment
Friendly and easy to deal with people
Strong work ethics and able to handle confidential matters
Willing to work hard to achieve objectives
Possess good communication and interpersonal skills
Courses and Training Attended
Exp: April 2018 MSTS – Asia FALCK NUTEC Basic Offshore Safety Induction and
Emergency
Training (B.O.S.E.T) inclusive of
Offshore safety, sea survival, basic life support and CPR
Helicopter Underwater Escape Training (H.U.E.T)
Basic Fire Fighting and Self-Rescue.OPITO Approved.
Exp: May 2017 Hydrogen Sulphide (H2S) Safety.
Exp: April 2016 Hospital Pusrawi at Kuala Lumpur, Malaysia.
Exp: June 2017 Permit to Work (PTW).
4. Computer Skills
Microsoft Words - Intermediate
Microsoft PowerPoint - Intermediate
Microsoft Excel - Intermediate
MapInfo Professional - Intermediate
ArcGIS - Beginner
CDS - Intermediate (Civil Design and Survey)
AutoCAD - Intermediate
Starnet - Intermediate
TBC (Trimble Business Center) – Intermediate (Commercial software)
TGO (Trimble Geodetic Office) - Intermediate (Commercial software)
TTC (Trimble Total Control) - Intermediate (Commercial software)
RTKLIB - Intermediate (Commercial software)
GDTS - Intermediate (Geodetic Datum Transformation System)
GMT - Intermediate (Generate Mapping Tools)
Bernese 5.0- Intermediate (High Precision GPS software)
Language
Malay
- Spoken : 10
- Written : 10
English
- Spoken : 8
- Written : 8
MUET – Band 3
5. CLIENT DESCRIPTION OF PROJECT DATE POSITION
PETRONAS
Carigali
Demobilization tide gauge tool
for tidal survey at Tangga Barat
platform.
April 2014 Surveyor
PETRONAS
Carigali
Deformation and integrity survey
at Bayan D18 oilfield.
May 2014
Surveyor
PETRONAS
Carigali
Deformation and integrity survey
at PC4 oilfield.
May 2014 Surveyor
PETRONAS
Carigali
Deformation and integrity survey
at Bokor & Betty oilfield.
July 2014 Surveyor
PETRONAS
Carigali
Deformation and integrity survey
at Bakau oilfield.
July 2014 Surveyor
PETRONAS
Carigali
Deformation and integrity survey
at West Lutong oilfield.
July 2014 Surveyor
PETRONAS
Carigali
Deformation and integrity survey
at Tukau oilfield.
July 2014 Surveyor
PETRONAS
Carigali
Deformation and integrity survey
at Bokor vent platform during
Turning Around.
August
2014
Surveyor
PETRONAS
Carigali
Deformation and integrity survey
at West Lutong vent platform
during Turning Around.
August
2014
Surveyor
PETRONAS
Carigali
Deformation and integrity survey
at Baram oilfield.
October
2014
Surveyor
6. PETRONAS
Carigali
Deformation and integrity survey
at D35 oilfield.
November
2014
Surveyor
PETRONAS
Carigali
Deformation and integrity survey
at Kumang oilfield.
December
2014
Surveyor
PETRONAS
KLCC
Least square adjustment class by
Dr. Martin William Rayson.
January
2015
Surveyor
Rig COSL
BOSS
Well surface coordinate at Bayan
D18B platform.
January
2015
Surveyor
UTM
Skudai, Johor
Tidal class by Dr. Razali Mahmud
and calibration GNSS equipment.
January
2015
Surveyor
Kemaman
Establishment Geodetic Control
Point, levelling and land survey
at KSB, KPK and KPC port.
April
2015
Surveyor
Labuan
Establishment Geodetic Control
Point, levelling and land survey
at ASB and LSE port.
May
2015
Surveyor
7. ACTIVITIES
Reserved Officer Training Unit (ROTU) – Young Officer
Program Latihan Khidmat Negara (PLKN) – Sandakan, Sabah
Program Malam Anugerah Kolej 11 Se’BLAST (2009)
Member of Royal Institute of Surveyor Malaysia (RISM)
Member of PEMETA UTM (Persatuan Mahasiswa Ukur Tanah)
Participate in SUKAM (Kejohanan Sukan Antara Kolej Mahasiswa) – Futsal
Attended UTM Degree++ Professional Course:
i. TECS (Test of English Communication Skills)
ii. How To Get Yourself Employed
iii. OSHA (Occupational Safety & Health)
iv. ISO 9001:2008 Quality Management System Requirement
v. How To Manage Your Personal Finance
REFERENCE
Dr. Harun Shah bin Mat Zin
Academic Advisor
Geomatic Department,
Faculty of Geoinformation and Real Estates,
Universiti Teknologi Malaysia,
81 310 Skudai, Johor Darul Takzim.
07-5530973
harunshah@utm.my
Assoc. Prof. Kamaludin Mohd Omar,
Final Year Project Supervisor,
Geomatic Department,
Faculty of Geoinformation and Real Estates,
Universiti Teknologi Malaysia,
81 310 Skudai, Johor Darul Takzim.
07-5530807
kamaludinomar@utm.my