Mohamed Hisham Mohamed Gadallah is an Egyptian electrical engineering student currently in his third year at Cairo University. He has maintained high grades, ranking in the top 10 of his class of 220 students. His technical experience includes various microcontroller and circuit design projects. He is active in extracurricular engineering organizations like IEEE and seeks to enhance practical skills through internships and workshops.
Automation engineer - CV
Abdelrhman Ahmed Hashesh
01146674809 - Abdelrhmanahmed2019@gmail.com
Learn, Practice, Teach. This the path I following to continue developing my skills to start a career as a professional automation engineer, more learn through self-study and courses then practice through internships and projects, finally teach and share what I learn to make it available to everyone at any time through my YouTube channel and student activities, I’m passion about automation and energy management, looking to find a challenging suitable summer internship where my skills are being utilized as well as enhanced.
Yamini Softech Pvt. Ltd. delivers project oriented training with respect to academic projects pertaining to M. tech, B. tech (ECE, EIE, CSE, IT), MCA and degree computer science of universities in India. The training includes SDLC (system development life cycle), process models, job roles apart from the technical stuff required to complete project work. The aim of this training gives exposure to real world software development with state of the art technologies and key design patterns. This kind of training enables student to work on his project’s coding and documentation on his own with expert guidance from us. It can fill the gap between the industry requirements and the academic skills which student gains from college/university. It could be a turning point to those who utilize their project work period allotted by university in right spirit.
1. Mohamed Hisham Mohamed Gadallah
Address: 14 El zaher pipers st., Hadayek Helwan, Cairo, Egypt – 11433
Cell phone: +20 1023696113
E-mail: mohamed1031994@gmail.com
LinkedIn: https://eg.linkedin.com/in/mohamed-hisham-m-gadallah-9b650aa0
Education
BSc in Electrical Power Engineering
(Cairo University)
(2012~present)
Current status: Third year student.
Preparatory year grade: Distinction 92 % Rank : 38th
(among
2300student),and 5th
(among 220 student).
First year grade: Distinction 91% Rank : 6th
(among 220 student).
Second year grade: Distinction 89% Rank : 8th
(among 220 student).
Cumulative grade: Distinction 91% Rank :6th
(among 220 student).
Secondary Stage
(2009~2012)
Zahraa Helwan Secondary School, Cairo, Egypt.
Score: 99%
Technical Projects
Digital-Senstive
Electronic Ohmmeter
(Jan.2015)
Microcontroller based instrument to measure the resistance
(variable & fixed with its tolerance). Then the microcontroller use
the LCD screen interface to display the measured value of the
resistor
Analogue-Senstive
Electronic Ohmmeter
(Jan.2015)
Modeling and analysis
of DC motor
(Jan.2015)
DC Motor Control And
Its Temperature Sensing
(April.2015)
Digital-Sensitive
LUXmeter
Based on the pointer deflection of an analogue “Galvanometer” or
senstive ammeter with scaling it with the ohm scale instead of
ampere scale. Then the pointer stand still on the measured value of
resistor by an electronic circuit using “Operational Amplifiers
(Op.Amps) ”.
A DC motor system was used in an open loop system to study its
response time, get and plot its transfer function , study the effect of
changing the gain on the motor’s speed and study the effect of
varying the feedback gain in a closed loop system.
Microcontroller based system.Using the “PIC18F877A” and a
keyoad interfacing to inter the motor speed and direction (Reverse /
Forward) and display its temperature on “LCD”And make the
system trip if the temperature exceeds the upper limit and give an
alarm.
Microcontroller based instrument.Using the “PIC18F877A” , LDR
(Light Dependtant Resistor) and “LCD” interface , the meter gives
the illuminance in LUX by solving the characteristic equation of
the used LDR internally and display it on the “LCD” screen .
Internships & Summer trainings
Network Training Center at South
Cairo Power Station(Summer 2014).
Transformers –Classic control– Batteries .
2. ABB (summer 2015).
Shaker Consultant Group
(summer 2015).
LV,MV,Robotics and Power systems.
Electrical Power Distribution Training about all its different
systems.
Technical Skills
Programming Software MATLAB (Scripting).
C++ (Good).
C (Good).
Visual Basic (Good).
Electronic Circuits Design
Software
Electrical Distribution
(MEP)
Electrical Distribution
Softwares (MEP design)
Digital Design
Classic Control Circuits
Design and Simulation
MikroC for PIC microcontrollers e.g.LCD and Keypad
interfaces , Motor speed and direction control,…….etc.
Proteus Professional for circuits’ simulation and printed
circuit board (PCB) design.
Multisim simulator , to simulate electronic and logical
circuits.
Indoor, outdoor and emergency Lighting Design (Manually &
Software).
Power Distribution design for different types of buildings, "Load
Estimation", CBs and cable sizing, Transformers and generators
selection.
Lefts design.
UPS system design and selection.
Light current systems design (Fire alarm system, telephone & data
system, TV system).
2D-AutoCAD for home and construction electrical design.
REVIT Architecture 2014 for implementing the architectural
building, and building information modeling (BIM).
REVIT MEP 2014 for mechanical and electrical pluming.
“DiaLUX” and “DiaLUX-evo” for indoor, outdoor and emergency
lighting design, calculations and the construction simulation.
“ETAP” and "Ecodial" software short circuit, Voltage drop
calculations and other electric calculations (basics).
Design combinational and sequential circuits and simulate it.
Design the classic Control circuits and simulate it using “EKTS”
Software.
Self-Study
AutoCAD Online tutorials (www.electutors.com)
Linear circuits Online course on Coursera.org
Matlab Online course from MIT university
Classic control design
And simulation”EKTS”
Online tutorials (www.electutors.com)
3. PICMicrocontrollers (Programming
and simulation).
Online tutorials and Books
Extracurricular Activities
BH: Blackhorse
(2013/present)
BH is a student activity which aims to help the students in their
academic field and improve the education system in Egypt by
providing new alternatives for the students.
Academic member.(2013/July.2014)
BOT member ( Board Of Trustees ) (2014/present)
IRC: Information Resource Center
in U.S embassy
(Mar.2014/present)
Member in the IRC.
IEEE-CUSB Power club
(Nov.2014/present)
IEEE-CUSB: IEEE Cairo university student branch
Aims to enhance the research skills of the students, decrease the gap
between theoretical science and practical life.
http://www.ieee-cusb.org
-IEEE power Directorate member (from 2014 to 2016 for two
sucessive seasons and present).
1. Participant in Distribution workshop.(Feb.2014)
And won the rank :2nd
with GPA of 5 from 5 in the final
workshop test .
2. Participant in Classic control workshop.(April.2014)
And won the rank :1st
with GPA of 4.9 from 5 in the final
workshop test.
3. One of IEEE Egypt section volunteers to organize the
International event of “NASA’s Apace Apps Cairo”(April 2015).
4. “I-Distribute” as “Solarized Brains”workshops moderator
(Nov.2014/July 2015).
5. Leader of "Distropro" distribution workshop (Dec. 2015).
6. Best active leader in IEEE-CUSB Power Directorate (Feb. 2015).
Languages
Arabic Mother tongue
English Professional studying proficiency
Personal Information
Date of Birth 10-03-1994
Nationality Egyptian
Marital Status Single
Military Service Postponed