1
Learning Material
by
Department ofChemical Engineering
JNTUA College of Engineering Ananthapuramu
Ananthapuramu – 515002 (A. P)
2024-25
Guidelines for Power Point Presentation
2.
2
<Student Name>
<Admission No>
Departmentof Chemical Engineering
JNTUA CE Ananthapuramu
2024-25
<External Supervisor Name>
<Designation>
<Institute/Organization>
<Place>
<Internal Supervisor Name>
<Designation>
Department of Chemical Engineering
JNTUA CE Ananthapuramu
<Title of the project work>
6
Materials
The Materials usedto carry out the experimental work.
The materials can be chemicals, equipment, glassware, software tools,
any other hardware. Please give technical specifications of all the materials
especially make if available.
7.
7
Methodology
• Methodology isthe procedure of doing the work
(experiments/simulation/Design) in a systematic way.
• Here discuss about the methods/procedures that have
been adopted for completion of the work.
• If design of experiments has been used it may be
explained here.
8.
8
Results and Discussion
Themajor outcomes of the work
Results are the answers to the objectives.
Ensure that the results are the outcomes of the experimental
work meeting the objectives of the project.
Interpret the results in detail (Discussion)
9.
9
Conclusions/Summary
Significance of theresults is conclusion
• Objectives, results and conclusions all are to be
mapped/connected.
• The impact of the results of the work.
10.
10
Scope for futurework
Work that can be extended further
This must be the motivation for future researchers
11.
11
Acknowledgement
Acknowledge the supervisors(internal/ external)
Acknowledge the various facilities availed in different institutes and
the persons who helped in the successful completion of the work
12.
12
References
References cited inthe Presentation not few references from report
References can also be cited at the bottom in the respective slide
