The document discusses the issue of black spots on mirrors caused by desilvering due to steam buildup. It suggests that while buying a new mirror is an option, it can be expensive and challenging due to the installation process. Instead, the document proposes creating a DIY custom mirror frame as a practical solution.

1. Mirror Desilvering
What to do about black edges on mirrors!

2. Who doesn’t love a hot shower?
You step out, dry off, and wipe the steam from the mirror.
It is at that moment that you see…

3. Black Spots!

4. You’re like…

5. ?
Why does this happen?

6. Your poor mirror suffers from a very common
problem known as de-silvering. It happens
from repeated steam buildup, where moisture
penetrates the silver coating on the back of
your mirror, causing it to separate from the
glass.
Why does this happen?

7. So, What Can You Do?
¯_(ツ)_/¯

8. You Could Buy A New Mirror…

9. But…there are a few things to consider.

10. It could turn out to be quite expensive.

11. Also, most wall mounted mirrors are:
1. 2.

12. Also, most wall mounted mirrors are:
1. Glued in place. 2.

13. Also, most wall mounted mirrors are:
1. Glued in place. 2. Very heavy.

14. This could end up being a dangerous and
difficult DIY project.

15. Of course, you could always…

16. …Stop Showering

17. But Then You’d Be Smelly & Alone

18. Fortunately for you and your friends you
don’t have to do that! We have the solution.

19. A DIY Custom Mirror Frame From:

20. Which will take your mirrors from this…

21. To this!

22. Using these:

23. It’s as simple as 1, 2, 3

24. Visit MirrorChic.com to get some samples today!