The MP Polierer Electronic is a compact, ergonomic electric polishing machine. It features a rotary speed selector and high torque motor for perfect work without fatigue. A 6x microprocessor electronic ensures constant power transfer without loss of performance or risk of burning. It is optimized for use with MP polishing pads and the MP ONE-STEP Super-Polish compound to achieve high quality surface finishes.
Mipa Vicrom is a basecoat that creates a chrome-like mirror effect surface. It is intended to coat rims, trim, and other parts. To protect against weathering and mechanical stress, the surface should be recoated with Mipa 2K clearcoats. Mipa Vicrom has a mixing ratio for ready to spray use and can be thinned if needed. It is applied in thin, uniform layers with a spray gun at low pressure to achieve the best mirror effect.
MP ProtectiveHalfMask-Box Reusable is a reusable half mask for use in paint shops. It is made of a flexible, lightweight plastic that provides maximum comfort while complying with European and US safety standards. The mask comes with two each of filters for organic gases/vapors and particles, as well as mounts for adding extra filters. Replacement filters can also be purchased.
This document provides product information for Mipa Ziehspachtel PL10, a two-component long-term paste filler based on unsaturated polyester resins. It is suitable for repairing larger body areas on vehicles and machinery. The putty has a fine grain and can be applied in thin layers. It has a long pot life and is heat resistant up to 180°C. The document describes the product's applications, mixing instructions, drying times, and safety precautions.
The MP Polierer Electronic is a compact, ergonomic electric polishing machine. It features a rotary speed selector and high torque motor for perfect work without fatigue. A 6x microprocessor electronic ensures constant power transfer without loss of performance or risk of burning. It is optimized for use with MP polishing pads and the MP ONE-STEP Super-Polish compound to achieve high quality surface finishes.
Mipa Vicrom is a basecoat that creates a chrome-like mirror effect surface. It is intended to coat rims, trim, and other parts. To protect against weathering and mechanical stress, the surface should be recoated with Mipa 2K clearcoats. Mipa Vicrom has a mixing ratio for ready to spray use and can be thinned if needed. It is applied in thin, uniform layers with a spray gun at low pressure to achieve the best mirror effect.
MP ProtectiveHalfMask-Box Reusable is a reusable half mask for use in paint shops. It is made of a flexible, lightweight plastic that provides maximum comfort while complying with European and US safety standards. The mask comes with two each of filters for organic gases/vapors and particles, as well as mounts for adding extra filters. Replacement filters can also be purchased.
This document provides product information for Mipa Ziehspachtel PL10, a two-component long-term paste filler based on unsaturated polyester resins. It is suitable for repairing larger body areas on vehicles and machinery. The putty has a fine grain and can be applied in thin layers. It has a long pot life and is heat resistant up to 180°C. The document describes the product's applications, mixing instructions, drying times, and safety precautions.
MP FineLineTape is a masking tape suitable for multi-color and design painting. It produces almost no edges during painting due to its extremely thin material of 0.12mm. It adheres well to different substrates and can be used for several successive drying processes up to 120°C without needing to remask. The special carrier material ensures perfect results when properly used, including for water-based paints. It is available in 55m rolls in widths of 3mm, 6mm, 9mm and 12mm.
MP Polierteller offers backing pads in various sizes that work with MP polishing foams and pads to achieve a perfect surface finish on vehicles. The backing pads and unique MP ONE-STEP Super-Polish agent allow users to polish out trapped dust and remove scratches in a single process when used together. The document provides technical details and item numbers for three backing pad sizes available for purchase.
MP ONE-STEP Super-Polish is a one-step polish that can remove traces of spray dust, spraying transitions, and sanding traces in one operation. It allows polishing after fine sanding with P1500-P2000 paper without leaving holograms. Paint defects can be removed and the product easily wipes away without residue, providing a perfect finish for paint surfaces. The polish is silicone-free with aluminum oxide and suitable for scratch-resistant nano coatings.
This document discusses coatings and surface treatments from Mipa. It notes that surface quality makes an important first impression, and that customers expect damage-free surfaces. It then summarizes Mipa's products for spot repair and coatings, including their aerosol and mixing systems that can produce thousands of color shades. The document highlights Mipa's coatings for sports equipment and aircraft to protect against weathering while allowing flexibility or conductivity as needed.
This document provides safety information for a 2K-Plastic-Grundierfiller product. It contains hazardous chemicals including xylene, ethyl acetate, and solvent naphtha. The product is highly flammable and harmful if inhaled, in contact with skin, or if swallowed. It can cause irritation to eyes, skin, and respiratory tract. In the event of contact, remove contaminated clothing and rinse area with water. Seek medical help if symptoms persist. The product requires proper storage and handling to prevent fire or exposure.
1) The document provides product information for Mipa 2K-Plastic-Grundierfiller, a fast drying primer-surfacer that adheres directly to various plastic materials used in automotive applications.
2) It can be used as both an adhesion promoter and filler in a single application and allows wet-on-wet application with all 1K and 2K paints.
3) The primer has a pot life of 4-5 hours, dries to dust in 25-30 minutes at 20°C object temperature, and achieves full hardness within 60-70 minutes at 20°C or 20-30 minutes at 60°C object temperature.
This document provides a safety data sheet for Mipa 1K-Fastfiller grau, a knife filler and surfacer. It lists the product ingredients and identifies those that are hazardous, including xylene, butan-1-ol, ethanol, n-butyl acetate, ethyl acetate, bisphenol, phosphoric acid, and solvent naphtha. It also provides handling guidelines, protective equipment recommendations, and emergency procedures for accidental release. The product contains flammable and hazardous materials and proper precautions should be taken when using it.
Mipa 1K-Fast-Filler is a 1K repair filler for automotive use that has excellent filling power. It can be applied to sanded old paint layers, shop primers, and directly to steel. It sands and dries quickly, saving time. It is chromate and lead free. It sprays easily at a viscosity of 18-22 seconds and dries fully hard in under an hour when applied at a thickness of 40-50 microns. Proper thinning and application conditions ensure best performance.
This safety data sheet provides information on the product Alu-Chrom Spray. It lists the product ingredients including ethyl acetate, propane, xylene, butane, isobutane, and aluminium powder. It describes the product as an aerosol containing flammable and irritating components. The document provides handling, storage, exposure, and disposal guidance to minimize health and environmental risks.
This document provides a safety data sheet for product A 40, describing:
1) The product and company details
2) Hazards associated with the product including flammability and potential to cause skin/eye irritation or drowsiness
3) The main ingredients in the product and their hazards
4) First aid measures, firefighting measures, and accidental release measures
Mipa A 40 1K-Acrylspachtel is an acrylic-based filler for levelling minor irregularities, scratches and pores on primer or filler surfaces. It can also be used on fiberglass and old coatings. It applies in thin layers and can be recoated with most paint systems. The document provides product information on the filler including its color, application methods, drying times, and VOC content which is below the EC limiting value. It also notes application and processing conditions and states the product should be disposed of according to environmental regulations.
Mipa Alu-Chrom-Spray is a high quality heat resistant aluminium coating for metal substrates like exhaust systems. It provides anti-corrosive protection and is conductive, making it suitable for spot welding. The coating is heat resistant up to 800°C and highly resistant to acids and lyes. It requires pre-cleansing with a silicone remover and should be applied in 1-2 thin coats at a distance of 20-30cm, with 1-2 minutes between coats. The coating dries within 10 minutes and reaches full hardness after 24 hours.
This safety data sheet provides information on the product P 911. It identifies the product, supplier, hazards, composition, and safety precautions. The product contains styrene which is harmful if inhaled, irritating to eyes and skin, and flammable. The sheet provides guidance on handling, storage, exposure controls, firefighting measures, accidental release measures, transport, and disposal.
Mipa P 911 is a two-component polyester filling putty that is easy to sand. It can be used to equalize irregularities, close pinholes, and repair small scratches on vehicle bodies. It adheres well to metals and reinforced materials. The putty has excellent bending strength and stability on vertical surfaces. It requires a 2% hardener by weight and can be sanded after 20 minutes. Proper ventilation is needed when using and the putty cannot be removed once fully cured.
Mipa has developed a new water-based basecoat system called Mipa WBC that meets legal VOC requirements while avoiding disadvantages of previous water-based systems. Mipa WBC offers easy application, reliable colors, high efficiency and material savings compared to conventional systems. It is part of Mipa's complete product line for professional automotive refinishing that focuses on water-based technologies for the future of the industry.
MP WBS Klebelack Anti Dust is a water-thinnable, transparent adhesive coating used to bind dust and spray dust in spray booths. It can be easily applied with a spray gun or roller and once saturated, is removed with water. The product binds dust for approximately 50 hours of use in spray booths, depending on temperature. It has a pleasant fragrance and is environmentally friendly.
MP FineLineTape is a masking tape suitable for multi-color and design painting. It produces almost no edges during painting due to its extremely thin material of 0.12mm. It adheres well to different substrates and can be used for several successive drying processes up to 120°C without needing to remask. The special carrier material ensures perfect results when properly used, including for water-based paints. It is available in 55m rolls in widths of 3mm, 6mm, 9mm and 12mm.
MP Polierteller offers backing pads in various sizes that work with MP polishing foams and pads to achieve a perfect surface finish on vehicles. The backing pads and unique MP ONE-STEP Super-Polish agent allow users to polish out trapped dust and remove scratches in a single process when used together. The document provides technical details and item numbers for three backing pad sizes available for purchase.
MP ONE-STEP Super-Polish is a one-step polish that can remove traces of spray dust, spraying transitions, and sanding traces in one operation. It allows polishing after fine sanding with P1500-P2000 paper without leaving holograms. Paint defects can be removed and the product easily wipes away without residue, providing a perfect finish for paint surfaces. The polish is silicone-free with aluminum oxide and suitable for scratch-resistant nano coatings.
This document discusses coatings and surface treatments from Mipa. It notes that surface quality makes an important first impression, and that customers expect damage-free surfaces. It then summarizes Mipa's products for spot repair and coatings, including their aerosol and mixing systems that can produce thousands of color shades. The document highlights Mipa's coatings for sports equipment and aircraft to protect against weathering while allowing flexibility or conductivity as needed.
This document provides safety information for a 2K-Plastic-Grundierfiller product. It contains hazardous chemicals including xylene, ethyl acetate, and solvent naphtha. The product is highly flammable and harmful if inhaled, in contact with skin, or if swallowed. It can cause irritation to eyes, skin, and respiratory tract. In the event of contact, remove contaminated clothing and rinse area with water. Seek medical help if symptoms persist. The product requires proper storage and handling to prevent fire or exposure.
1) The document provides product information for Mipa 2K-Plastic-Grundierfiller, a fast drying primer-surfacer that adheres directly to various plastic materials used in automotive applications.
2) It can be used as both an adhesion promoter and filler in a single application and allows wet-on-wet application with all 1K and 2K paints.
3) The primer has a pot life of 4-5 hours, dries to dust in 25-30 minutes at 20°C object temperature, and achieves full hardness within 60-70 minutes at 20°C or 20-30 minutes at 60°C object temperature.
This document provides a safety data sheet for Mipa 1K-Fastfiller grau, a knife filler and surfacer. It lists the product ingredients and identifies those that are hazardous, including xylene, butan-1-ol, ethanol, n-butyl acetate, ethyl acetate, bisphenol, phosphoric acid, and solvent naphtha. It also provides handling guidelines, protective equipment recommendations, and emergency procedures for accidental release. The product contains flammable and hazardous materials and proper precautions should be taken when using it.
Mipa 1K-Fast-Filler is a 1K repair filler for automotive use that has excellent filling power. It can be applied to sanded old paint layers, shop primers, and directly to steel. It sands and dries quickly, saving time. It is chromate and lead free. It sprays easily at a viscosity of 18-22 seconds and dries fully hard in under an hour when applied at a thickness of 40-50 microns. Proper thinning and application conditions ensure best performance.
This safety data sheet provides information on the product Alu-Chrom Spray. It lists the product ingredients including ethyl acetate, propane, xylene, butane, isobutane, and aluminium powder. It describes the product as an aerosol containing flammable and irritating components. The document provides handling, storage, exposure, and disposal guidance to minimize health and environmental risks.
This document provides a safety data sheet for product A 40, describing:
1) The product and company details
2) Hazards associated with the product including flammability and potential to cause skin/eye irritation or drowsiness
3) The main ingredients in the product and their hazards
4) First aid measures, firefighting measures, and accidental release measures
Mipa A 40 1K-Acrylspachtel is an acrylic-based filler for levelling minor irregularities, scratches and pores on primer or filler surfaces. It can also be used on fiberglass and old coatings. It applies in thin layers and can be recoated with most paint systems. The document provides product information on the filler including its color, application methods, drying times, and VOC content which is below the EC limiting value. It also notes application and processing conditions and states the product should be disposed of according to environmental regulations.
Mipa Alu-Chrom-Spray is a high quality heat resistant aluminium coating for metal substrates like exhaust systems. It provides anti-corrosive protection and is conductive, making it suitable for spot welding. The coating is heat resistant up to 800°C and highly resistant to acids and lyes. It requires pre-cleansing with a silicone remover and should be applied in 1-2 thin coats at a distance of 20-30cm, with 1-2 minutes between coats. The coating dries within 10 minutes and reaches full hardness after 24 hours.
This safety data sheet provides information on the product P 911. It identifies the product, supplier, hazards, composition, and safety precautions. The product contains styrene which is harmful if inhaled, irritating to eyes and skin, and flammable. The sheet provides guidance on handling, storage, exposure controls, firefighting measures, accidental release measures, transport, and disposal.
Mipa P 911 is a two-component polyester filling putty that is easy to sand. It can be used to equalize irregularities, close pinholes, and repair small scratches on vehicle bodies. It adheres well to metals and reinforced materials. The putty has excellent bending strength and stability on vertical surfaces. It requires a 2% hardener by weight and can be sanded after 20 minutes. Proper ventilation is needed when using and the putty cannot be removed once fully cured.
Mipa has developed a new water-based basecoat system called Mipa WBC that meets legal VOC requirements while avoiding disadvantages of previous water-based systems. Mipa WBC offers easy application, reliable colors, high efficiency and material savings compared to conventional systems. It is part of Mipa's complete product line for professional automotive refinishing that focuses on water-based technologies for the future of the industry.
MP WBS Klebelack Anti Dust is a water-thinnable, transparent adhesive coating used to bind dust and spray dust in spray booths. It can be easily applied with a spray gun or roller and once saturated, is removed with water. The product binds dust for approximately 50 hours of use in spray booths, depending on temperature. It has a pleasant fragrance and is environmentally friendly.