Complete documentation for the optional Digital Signage addon for MIDAS Web Based Room & Resource Scheduling Software. Find out more at http://mid.as/signage
MIDAS - Web Based Room & Resource Scheduling Software - LDAP (Active Director...MIDAS
This is the complete User Manual for MIDAS (http://mid.as/), a complete web based scheduling solution giving you complete control over your room bookings & resource scheduling. You can find out more about MIDAS at http://mid.as/
MIDAS - Web Based Room & Resource Scheduling Software - User ManualMIDAS
This is the complete User Manual for MIDAS (http://mid.as/), a complete web based scheduling solution giving you complete control over your room bookings & resource scheduling. You can find out more about MIDAS at http://mid.as/
Browser Performance Tests - Internet Explorer 11 vs Firefox 25 vs Google Chro...MIDAS
The document summarizes the results of browser performance tests conducted on Google Chrome 31, Mozilla Firefox 25, Internet Explorer 11, Opera 17, and Apple Safari 5.1. The tests evaluated speed, memory usage, compliance with web standards, and JavaScript performance.
Google Chrome was the overall winner, taking first place in 8 out of 15 tests and second in two others. Opera 17 performed better than expected, taking first in 3 tests and runner up in 6. Internet Explorer 11 showed significant improvements over previous versions. Firefox 25 performed worse than expected, finishing fourth overall. The document concludes by recommending browsers based on specific usage scenarios and notes all browsers tested support the MIDAS room scheduling software.
This document provides steps for deploying Cisco Identity Services Engine (ISE) to enable 802.1X authentication on wired and wireless networks. It involves deploying ISE as the centralized RADIUS server, enabling MAC authentication bypass and 802.1X open mode on switches to monitor device connections in "monitor mode", integrating ISE with wireless LAN controllers for 802.1X wireless authentication, and profiling devices using DHCP and other traffic sources. The deployment is intended to enable identity-based network access without impacting existing connectivity as part of a phased approach to a full TrustSec deployment.
This document provides instructions for using the inDEX software to create vending machine planograms. It describes how to:
1) Create a product database by entering product information like names, prices, and nutrition facts.
2) Create a planogram by assigning products to selection numbers on a virtual vending machine. Planograms can be imported from existing machines.
3) Edit planograms by adding or removing products, and editing product details.
4) Save planograms as files that can be transferred to vending machines via USB drives or mobile devices to update the machines' product selections and information.
This document provides an overview of Citrix XenApp 5 and the XenApp 5 Feature Pack. It discusses the different product editions, new features in XenApp 5, and enhanced capabilities in the Feature Pack. Key areas covered include application delivery, streaming, Receiver, XenServer virtualization, load testing, provisioning, profiles, monitoring, security, optimization, and voice services. It also provides guidance on deploying XenApp 5 farms and getting started with application management.
VCADS Elite is a Windows-based software tool used to test, calibrate, and program parameters on Volvo ECUs. It provides functions for Volvo vehicles equipped with Vehicle Electronics '98 or VERSION2 electronic control systems. The manual describes how to install VCADS Elite on a PC and connect it to a vehicle to test and adjust customer parameters on ECUs using the software's graphical interfaces. Proper PC and network setup is required before installation. A user ID is assigned to each user for access.
VCADS Elite is a Windows-based software tool used to test, calibrate, and program parameters on Volvo ECUs. It provides functions for Volvo vehicles equipped with Vehicle Electronics '98 or VERSION2 electronic control systems. The manual describes how to install VCADS Elite on a PC and connect it to a vehicle to test and adjust customer parameters on ECUs using the software's graphical interfaces. Proper PC and network setup is required before installation. A user ID is assigned to each user for access.
MIDAS - Web Based Room & Resource Scheduling Software - LDAP (Active Director...MIDAS
This is the complete User Manual for MIDAS (http://mid.as/), a complete web based scheduling solution giving you complete control over your room bookings & resource scheduling. You can find out more about MIDAS at http://mid.as/
MIDAS - Web Based Room & Resource Scheduling Software - User ManualMIDAS
This is the complete User Manual for MIDAS (http://mid.as/), a complete web based scheduling solution giving you complete control over your room bookings & resource scheduling. You can find out more about MIDAS at http://mid.as/
Browser Performance Tests - Internet Explorer 11 vs Firefox 25 vs Google Chro...MIDAS
The document summarizes the results of browser performance tests conducted on Google Chrome 31, Mozilla Firefox 25, Internet Explorer 11, Opera 17, and Apple Safari 5.1. The tests evaluated speed, memory usage, compliance with web standards, and JavaScript performance.
Google Chrome was the overall winner, taking first place in 8 out of 15 tests and second in two others. Opera 17 performed better than expected, taking first in 3 tests and runner up in 6. Internet Explorer 11 showed significant improvements over previous versions. Firefox 25 performed worse than expected, finishing fourth overall. The document concludes by recommending browsers based on specific usage scenarios and notes all browsers tested support the MIDAS room scheduling software.
This document provides steps for deploying Cisco Identity Services Engine (ISE) to enable 802.1X authentication on wired and wireless networks. It involves deploying ISE as the centralized RADIUS server, enabling MAC authentication bypass and 802.1X open mode on switches to monitor device connections in "monitor mode", integrating ISE with wireless LAN controllers for 802.1X wireless authentication, and profiling devices using DHCP and other traffic sources. The deployment is intended to enable identity-based network access without impacting existing connectivity as part of a phased approach to a full TrustSec deployment.
This document provides instructions for using the inDEX software to create vending machine planograms. It describes how to:
1) Create a product database by entering product information like names, prices, and nutrition facts.
2) Create a planogram by assigning products to selection numbers on a virtual vending machine. Planograms can be imported from existing machines.
3) Edit planograms by adding or removing products, and editing product details.
4) Save planograms as files that can be transferred to vending machines via USB drives or mobile devices to update the machines' product selections and information.
This document provides an overview of Citrix XenApp 5 and the XenApp 5 Feature Pack. It discusses the different product editions, new features in XenApp 5, and enhanced capabilities in the Feature Pack. Key areas covered include application delivery, streaming, Receiver, XenServer virtualization, load testing, provisioning, profiles, monitoring, security, optimization, and voice services. It also provides guidance on deploying XenApp 5 farms and getting started with application management.
VCADS Elite is a Windows-based software tool used to test, calibrate, and program parameters on Volvo ECUs. It provides functions for Volvo vehicles equipped with Vehicle Electronics '98 or VERSION2 electronic control systems. The manual describes how to install VCADS Elite on a PC and connect it to a vehicle to test and adjust customer parameters on ECUs using the software's graphical interfaces. Proper PC and network setup is required before installation. A user ID is assigned to each user for access.
VCADS Elite is a Windows-based software tool used to test, calibrate, and program parameters on Volvo ECUs. It provides functions for Volvo vehicles equipped with Vehicle Electronics '98 or VERSION2 electronic control systems. The manual describes how to install VCADS Elite on a PC and connect it to a vehicle to test and adjust customer parameters on ECUs using the software's graphical interfaces. Proper PC and network setup is required before installation. A user ID is assigned to each user for access.
Volvo Vcads Pro Truck Scanner User Manual OBDII365OBD365
VCADS Pro for Volvo 2.40 offers an excellent software tool to help customers and bodybuilders in performing their own diagnostic work on Volvo engines. http://www.obdii365.com/wholesale/volvo-truck-diagnostic-tool-volvo-vcads-pro.html
Pyrotechnic Systems is a software technology firm that specializes in providing IT solutions and services based on Open Systems. They have developed several digital signage products for different industries including Neo Xtreme for advertising companies, Neo Xcorporate for corporate environments, Neo Xhospitality for hotels, Neo Xretail for retail stores, Neo Xcall for call centers, and Neo Xkiosks for interactive kiosks. Their digital signage software allows for centralized monitoring and control of displays across multiple locations and includes features such as video on demand, personalized messaging, and live data integration.
This document provides instructions for downloading and installing CATIA V5 Student Edition. It includes details on the application process, prerequisites, downloading and installing the software, and troubleshooting tips. The guide outlines the key differences between the student and commercial versions, the included workbenches, and eligibility requirements. Frequently asked questions are also addressed throughout the document.
A- LES CONCEPTS
Comprehension du bim.
Travailler dans différentes vues.
Classement et hierarchie des éléments dans Revit.
B-L'ENVIRONNEMENT DE TRAVAIL
Page des fichiers rescents et grand R.
Le ruban.
Fenêtre des propriétés.
Explorateur du projet.
Navigation dans un modèle.(zoom, rotation et panoramique).
Selection des objets, et verouillage.
C-DEMARRAGE D'UN PROJET.
Les gabarits.
Travail collaboratif.
Configuration d'un nouveau projet.
Manipulation des niveaux.
Manipulation des files de projet.
Utilisation des cotes temporaires.
C- MODELISATION PAR OBJETS:
Ajout des murs.
Propriété et type de murs.
Utilisation des accroches.
Ajouts de poteaux et poutres.
Ajout de portes et fenêtres.
Ajout d'élements de plomberie et d'électricité.
Utilisation de la jonction entre murs.
Utilisation des contraintes.
D- LIENS, IMPORTS ET GROUPES:
Lier fichiers DWG/DXF/SKP
Création de topogrpahie d'un site à partir d'un fichier.
Création et gestion des groupes.
Création et gestion des liens Revit.
Utilisation du partage d'emplacement.
E- MODELISATION PAR ESQUISSE:
Sols., toits et plafonds.
Toit par extrusion.
Ouvertures.
F-ESCALIERS.
Edition avancée d'escalier.
Edition avancée de gardes corps.
G- EDITION AVANCEE DES MURS:
Création d'un nouveau type de murs..
Création et gestion des murs empilés.
Création et gestion des murs rideaux.
.
H- GESTION DES GRAPHISMES:
Gestion du style des objets.
Gestion du remplacement de la visibilité et du graphisme des éléments.
Création et application des gabarits de vue.
Cacher et isoler les éléments.
Cadrage de la vue.
Plage de vue et entendues.
Vue isométrique d'une selection.
Option d'affichage des graphismes.
I- PIECES:
Création et gestion des pièces.
J- NOMENCLATURE ET ETIQUETTES:
Gestion des étiquettes.
Création et gestion des nomenclatures.
Modification des nomenclatures.
Enrichissement des VCCTP par les nomenclatures.
K-ANNOTATIONS.
Textes.
Dimensions
Symboles.
Légendes.
Détails.
Définir ses annotations.
L- PARAMETRIQUE ET FAMILLES
Utilisation des paramètres en mode projet.
Concept de famille.
Création d'une famille.
Utilisation des contraintes.
Utilisation des formes solides.
M- FEUILLE, IMPRESSION, PUBLICATION:
Création d'une feuille d'impression.
Export CAO.
Publication.
Impression PDF.
N- TRUCS ET ASTUCES.
A découvrir en formation.
IP Office Release 5 is Avaya's business communications solution for small and mid-sized businesses. It provides integrated voice, data, and messaging capabilities on a single platform. Key features include advanced call handling, contact center functionality, voicemail, conferencing, and support for IP phones and applications. The solution offers scalability from just a few users up to hundreds and can be customized for different business needs. Avaya provides tools to simplify ongoing administration and management of the IP Office system.
This document provides guidance for securing video teleconferencing (VTC) systems. It discusses the types of VTC systems and connectivity options. It then describes how to secure VTC endpoints through controls for confidentiality, access, operations, administration and more. The document also recommends policies, standard operating procedures, user training and agreements to securely manage VTC systems.
This document provides a technology plan for implementing a digital signage network with the following key points:
1) It recommends a hybrid network combining WiFi, WiMAX, and satellite networking to provide streaming video capabilities for digital signage.
2) It suggests using Puppy Linux and a fat client model for the digital signage deployment.
3) It states that immediate feedback response would be the most effective metric for measuring the success of a digital signage network.
This document provides a technology plan for implementing a digital signage network with the following key points:
1) It recommends a hybrid network combining WiFi, WiMAX, and satellite networking to provide streaming video capabilities for digital signage.
2) It suggests using Puppy Linux and a fat client model for the digital signage deployment.
3) It states that immediate feedback response would be the most effective metric for measuring the success of a digital signage network.
The document provides instructions for using the NuClient user interface. It includes sections on installation, login/logout, the main interface components for live view and playback, and configuration settings. The live view section describes the various panels, toolbar buttons, and grid layout options. The configuration section explains how to add, modify, and delete views and cameras.
Doorsng po t_core_workbook_sse_imagev3.3.1_v6moda_final_letterDarrel Rader
This document provides an introduction to exploring the web client for Rational DOORS Next Generation. It discusses exploring the project dashboard, viewing modules and their properties, and viewing module baselines. The dashboard provides real-time project status information. Modules can contain requirements, diagrams, tables, and other artifacts. Module baselines allow snapshotting a module at a point in time.
Sony Clie PEG-nx73 v handheld pda PalmOS manualІгор Ко
This document is a user manual for the CLIÉ handheld. It provides instructions for basic operations of the device such as using the stylus and Jog Dial navigator. It also explains how to start and quit applications, customize settings, exchange and update files using HotSync, enter text, and more. The manual contains detailed sections on the Palm OS screen, applications, preferences, and other features to help users operate the CLIÉ handheld.
Siemens win cc manual win cc configuration manualDien Ha The
Siemens,
Catalog Thiết Bị Tự Động Siemens, Catalog Thiết Bị Tự Động
Catalog Phụ Kiện Siemens, Catalog Phụ Kiện,
Catalog Siemens, Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Siemens vui lòng gọi: 0907.764.966
The document describes several products from RNDplus including the Smart Showcase, EasyBoard, TouchAll Wall, and TouchALL HUB.
The Smart Showcase is an unmanned digital marketing system that provides product information to customers through touchscreens without salespeople. The EasyBoard is a portable multi-touch screen that transforms existing displays like projectors into interactive smart boards. The TouchAll Wall is an interior wall system that functions as a large touch screen. Finally, the TouchALL HUB is a portable multi-touch conference device.
Your VAIO computer comes with a rechargeable battery pack that provides portable power when not connected to an AC outlet. To use the battery pack, insert it into the battery connector on the bottom of the computer. The battery charges when the computer is connected to an AC power source with the supplied AC adapter. An indicator light on the computer illuminates to indicate the battery's charging status. For optimal battery performance, follow the safety guidelines for handling and charging the battery pack.
Digital Signage In Healthcare What You Need To Knowahelmey
This document provides guidance for healthcare providers on planning and budgeting for digital signage. It discusses key considerations like hardware, software, installation, content creation and management. Hardware includes monitors, media players, mounting equipment and cables. Software includes media player software which may have annual licensing fees. Installation includes on-site surveys and mounting the equipment. Content and management software are critical for creating engaging content tailored to different healthcare audiences. Annual support contracts and training should also be part of budget planning when implementing a digital signage solution.
The document discusses technology planning for a digital signage network. It recommends:
1. Using a hybrid network combining WiMAX, Wi-Fi, and satellite IP networking to provide wireless connectivity for digital signs over long and short ranges.
2. Deploying the Puppy Linux operating system on digital sign players for stability and low hardware requirements.
3. Using a "fat client" model where digital signs have local storage and processing power rather than relying entirely on a central server.
4. Evaluating campaigns based on the "immediate feedback response" metric, which measures how many viewers directly engage with the digital signs, such as by contacting sponsors.
This document is a user guide for the CV61 vehicle mount computer running Windows 7. It provides information about setting up and using the CV61, including how to mount, power, and connect accessories to the computer. It also describes the user interface, available Intermec applications, how to manage and configure the computer through Intermec Settings, and how to develop and install additional applications. The guide contains information about operating and maintaining the CV61 in a vehicle mount environment.
Digital Signage - The Locads ver 6.0.pptxenigma1234
We are dealing in all types of digital signages and digital advertisements accross malls, societies and public places. We offer advertisement, Digtal Signages, CMS, BackPack and digital services to our customer. We are having unique combination of CMS and a chain of hardware products to support it. As there is a growing demand for the digital advertisement across public platforms, we are engaging ourselves in providing our customer with latest technology solutions to fulfill their requirement and demand. Giving us a change to server will not disappoint you. Thanks
인터맥산업용PC Intermec CV61 12.1인치 차량탑재용 산업용패널PC 매뉴얼HION IT
인터맥 CV61은 차량탑재 (지게차 또는 자동차) 모바일 컴퓨터 중에 하나입니다.
강력한 64 비트 1.8GHz 인텔 ® 아톰 프로세서가 적용된 CV61은 Windows 7 Professional 또는 Windows XP 운영 체제 중에서 선택할 수 있습니다.
또한 CV61은 메모리를 많이 차지하는 ERP 및 창고관리시스템 (WMS) 을 지원하기 위해 최대 3GB RAM을 제공합니다.
드롭 인 교체가 쉽고 경제적입니다.
현재 인터맥 CV60 차량 탑재 컴퓨터를 사용중인 경우 CV61은 가장 빠르고 쉬운 마이그레이션 경로를 제공합니다.
CV60 마운팅, 케이블 링, 키보드, 트레이, 스캐너 및 프린터와 호환되도록 설계된 CV61은 비용과 설치 시간을 절약 해줍니다.
내장 된 9-60 VDC 전원 공급 장치는 설치 비용을 낮추고 지게차 배터리가 고장 나더라도 백업을 제공합니다. 옵션으로 제공되는 외부 고전압 및성에 제거 장치 전력 변환기는 물론 기존 CV60 전력 변환기와 함께 사용할 수있는 어댑터 케이블도 제공됩니다.
또한 IT 관리자는 사용자 관리, 보안, 안티 바이러스, 방화벽, 그룹 정책 및 소프트웨어 업데이트를위한 표준 엔터프라이즈 PC 관리 도구를 지원하므로 CV61을 사용하기가 쉽습니다. CV61 옵션 인 Intermec Client Pack 터미널 에뮬레이션 및 산업용 브라우저 소프트웨어는 창고관리시스템 (WMS) 에 빠르고 안정적이며 안전한 연결을 제공합니다. 또한 Intermec 개발자 툴킷을 사용하면 다중 장치 환경에서 응용 프로그램 소프트웨어를 마이그레이션하는 데 드는 시간을 절약 할 수 있습니다.
CV61은 편안하고 친숙하며 쉽게 습득 할 수 있습니다. 매우 밝은 12.1 인치 터치 스크린 디스플레이는 희미하게 빛나는 창고 환경과 햇빛이 비치는 야외에서 쉽게 읽을 수 있습니다. 터치 스크린과 견고한 외부 백라이트 키보드는 장갑을 낀 손으로 쉽게 데이터를 입력 할 수 있도록 설계되었습니다.
안정적인 성능
CV61은 네트워크 보안, 관리 시스템 및 회사 표준과 통합되도록 설계되었습니다.
포괄적 인 네트워크 옵션으로는 시스코® CCXv4 인증을 갖춘 802.11 a / b / g / n과 낮은 신호 레벨을 경험할 수있는 지역에서도 동급 최고의 무선 범위, 로밍 안정성 및 보안을위한 통합 EDR 2.1 Class 1.5 블루투스®가 포함됩니다. 간헐적인 연결. 또한 CV61은 Intermec의 Vocollect VoiceCatalyst ™로 핸즈프리 음성 작업의 정확성, 생산성 및 안전성을 제공합니다.
극한의 온도에 견디도록 제작 된 CV61은 -20 ° C ~ + 50 ° C (-4 ° F ~ + 122 ° F)에서 작동하며 냉장 보관 및 냉동실 환경을 위해 옵션으로 제공되는 터치 스크린 디프 로스터 (-30 ° C까지 -22F).
IP66 등급은 방진 및 압력 세척 기능을 통해 하드웨어를 보호하며 사용자가 교체 할 수있는 SSD (Solid State Disk) 스토리지는 가혹하고 진동이 심한 환경에서도 데이터 무결성을 유지합니다.
CV61과 호환되는 Intermec SR61 제품군의 산업용 핸드헬드 바코드 스캐너를 사용하여 작업배정, 위치확인, 로트추적을 하거나 예외적인 관리를 할 수 있습니다. 온도 변화, 낙하, 먼지 및 날씨와 같은 거친 현실을 견딜 수 있도록 설계되었습니다. 여분의 장거리 스캐닝을위한 옵션이있어 작업자가 지게차의 자리를 떠나지 않고 멀리서도 스캔 할 수 있으며 테더형 또는 블루투스 모델 중 하나에서 사용할 수 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions : 높이: 27.4cm (10.8”) x 폭: 34.3cm (13.5”) x 깊이: 8.4cm (3.3”)
Weight : 5.2 kg (11.5 lbs)
Display : 12.1”, XGA 1024x768, LED backlit
PERFORMANCE CHARACTERISTICS
CPU : Intel® Atom 64-bit D425 1.8GHz
Operating System : Choice of Microsoft Windows® 7 Professional or Windows XP Professional
Memory :
Standard 1GB DDR2 for Windows XP
tandard 2GB DDR2 for Windows 7
User-upgradeable up to 3GB memory total
WIRELESS COMMUNICATIONS
Wireless LAN : 802.11a/b/g/n
Security : WIFI Certified; WPA and WPA2 Security
Authentication : 802.1x
Cisco Compatibility : CCXv4 Certified
Antenna : Dual internal MIMO antennas or optional external primary antenna with auto-sensing feature
Bluetooth : Integrated Bluetooth 2.0+EDR, Class 1.5 (30m range)
INTERFACE
2 USB 2.0 ports with locking breakout cable, 2 RS-232 COM ports with +5V power, CAN-BUS port,
Mic/ Headset port, Stereo Speaker output, DC power input, WiFi primary antenna port with auto-sensing,
RJ45 10/100 Ethernet port, Legacy PS/2 keyboard input
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
A brief overview of some of the key features and benefits of MIDAS Room Booking software.
View more features at https://mid.as/features
Simply accessed through your favorite web browser, on your desktop, laptop, tablet or mobile device, MIDAS lets you see at a glance when your room bookings are scheduled in the calendar. The system also allows you to schedule staffing and equipment, send booking confirmations, reminders and invoices to clients, take bookings or booking requests through your public website, and put an end to double bookings and confusion once and for all!
As all you need is a modern web browser, your MIDAS booking system is readily available wherever you are! - Whether at the office, at home, or on the move - the information in your room booking system is right there at your fingertips!
MIDAS room booking software is available as either a cloud hosted SaaS (Software as a Service) solution, or as a self-hosted "on-premises" solution where it may be downloaded, installed, and run from your own server.
We also offer a no risk 30-day FREE trial! - Get yours today at https://mid.as/free-trial
This is the complete User Manual for MIDAS (https://mid.as/)
MIDAS is a leading room booking system giving you complete control over your room bookings and resource scheduling, and trusted by organizations and businesses of all shapes and sizes around the world.
Simply accessed through your favorite web browser, on your desktop, laptop, tablet or mobile device, the software lets you see at a glance when your room bookings are scheduled in the calendar. The system also allows you to schedule staffing and equipment, send booking confirmations, reminders and invoices to clients, take bookings or booking requests through your public website, and put an end to double bookings and confusion once and for all!
As all you need is a modern web browser, your MIDAS booking system is readily available wherever you are! - Whether at the office, at home, or on the move - the information in your room booking system is right there at your fingertips!
MIDAS room booking software is available as either a cloud hosted SaaS (Software as a Service) solution, or as a self-hosted "on-premises" solution where it may be downloaded, installed, and run from your own server.
We also offer a no risk 30-day FREE trial! - see https://mid.as/free-trial
More Related Content
Similar to MIDAS Room & Resource Scheudling Software - Digital Signage Addon Documentation v1.01
Volvo Vcads Pro Truck Scanner User Manual OBDII365OBD365
VCADS Pro for Volvo 2.40 offers an excellent software tool to help customers and bodybuilders in performing their own diagnostic work on Volvo engines. http://www.obdii365.com/wholesale/volvo-truck-diagnostic-tool-volvo-vcads-pro.html
Pyrotechnic Systems is a software technology firm that specializes in providing IT solutions and services based on Open Systems. They have developed several digital signage products for different industries including Neo Xtreme for advertising companies, Neo Xcorporate for corporate environments, Neo Xhospitality for hotels, Neo Xretail for retail stores, Neo Xcall for call centers, and Neo Xkiosks for interactive kiosks. Their digital signage software allows for centralized monitoring and control of displays across multiple locations and includes features such as video on demand, personalized messaging, and live data integration.
This document provides instructions for downloading and installing CATIA V5 Student Edition. It includes details on the application process, prerequisites, downloading and installing the software, and troubleshooting tips. The guide outlines the key differences between the student and commercial versions, the included workbenches, and eligibility requirements. Frequently asked questions are also addressed throughout the document.
A- LES CONCEPTS
Comprehension du bim.
Travailler dans différentes vues.
Classement et hierarchie des éléments dans Revit.
B-L'ENVIRONNEMENT DE TRAVAIL
Page des fichiers rescents et grand R.
Le ruban.
Fenêtre des propriétés.
Explorateur du projet.
Navigation dans un modèle.(zoom, rotation et panoramique).
Selection des objets, et verouillage.
C-DEMARRAGE D'UN PROJET.
Les gabarits.
Travail collaboratif.
Configuration d'un nouveau projet.
Manipulation des niveaux.
Manipulation des files de projet.
Utilisation des cotes temporaires.
C- MODELISATION PAR OBJETS:
Ajout des murs.
Propriété et type de murs.
Utilisation des accroches.
Ajouts de poteaux et poutres.
Ajout de portes et fenêtres.
Ajout d'élements de plomberie et d'électricité.
Utilisation de la jonction entre murs.
Utilisation des contraintes.
D- LIENS, IMPORTS ET GROUPES:
Lier fichiers DWG/DXF/SKP
Création de topogrpahie d'un site à partir d'un fichier.
Création et gestion des groupes.
Création et gestion des liens Revit.
Utilisation du partage d'emplacement.
E- MODELISATION PAR ESQUISSE:
Sols., toits et plafonds.
Toit par extrusion.
Ouvertures.
F-ESCALIERS.
Edition avancée d'escalier.
Edition avancée de gardes corps.
G- EDITION AVANCEE DES MURS:
Création d'un nouveau type de murs..
Création et gestion des murs empilés.
Création et gestion des murs rideaux.
.
H- GESTION DES GRAPHISMES:
Gestion du style des objets.
Gestion du remplacement de la visibilité et du graphisme des éléments.
Création et application des gabarits de vue.
Cacher et isoler les éléments.
Cadrage de la vue.
Plage de vue et entendues.
Vue isométrique d'une selection.
Option d'affichage des graphismes.
I- PIECES:
Création et gestion des pièces.
J- NOMENCLATURE ET ETIQUETTES:
Gestion des étiquettes.
Création et gestion des nomenclatures.
Modification des nomenclatures.
Enrichissement des VCCTP par les nomenclatures.
K-ANNOTATIONS.
Textes.
Dimensions
Symboles.
Légendes.
Détails.
Définir ses annotations.
L- PARAMETRIQUE ET FAMILLES
Utilisation des paramètres en mode projet.
Concept de famille.
Création d'une famille.
Utilisation des contraintes.
Utilisation des formes solides.
M- FEUILLE, IMPRESSION, PUBLICATION:
Création d'une feuille d'impression.
Export CAO.
Publication.
Impression PDF.
N- TRUCS ET ASTUCES.
A découvrir en formation.
IP Office Release 5 is Avaya's business communications solution for small and mid-sized businesses. It provides integrated voice, data, and messaging capabilities on a single platform. Key features include advanced call handling, contact center functionality, voicemail, conferencing, and support for IP phones and applications. The solution offers scalability from just a few users up to hundreds and can be customized for different business needs. Avaya provides tools to simplify ongoing administration and management of the IP Office system.
This document provides guidance for securing video teleconferencing (VTC) systems. It discusses the types of VTC systems and connectivity options. It then describes how to secure VTC endpoints through controls for confidentiality, access, operations, administration and more. The document also recommends policies, standard operating procedures, user training and agreements to securely manage VTC systems.
This document provides a technology plan for implementing a digital signage network with the following key points:
1) It recommends a hybrid network combining WiFi, WiMAX, and satellite networking to provide streaming video capabilities for digital signage.
2) It suggests using Puppy Linux and a fat client model for the digital signage deployment.
3) It states that immediate feedback response would be the most effective metric for measuring the success of a digital signage network.
This document provides a technology plan for implementing a digital signage network with the following key points:
1) It recommends a hybrid network combining WiFi, WiMAX, and satellite networking to provide streaming video capabilities for digital signage.
2) It suggests using Puppy Linux and a fat client model for the digital signage deployment.
3) It states that immediate feedback response would be the most effective metric for measuring the success of a digital signage network.
The document provides instructions for using the NuClient user interface. It includes sections on installation, login/logout, the main interface components for live view and playback, and configuration settings. The live view section describes the various panels, toolbar buttons, and grid layout options. The configuration section explains how to add, modify, and delete views and cameras.
Doorsng po t_core_workbook_sse_imagev3.3.1_v6moda_final_letterDarrel Rader
This document provides an introduction to exploring the web client for Rational DOORS Next Generation. It discusses exploring the project dashboard, viewing modules and their properties, and viewing module baselines. The dashboard provides real-time project status information. Modules can contain requirements, diagrams, tables, and other artifacts. Module baselines allow snapshotting a module at a point in time.
Sony Clie PEG-nx73 v handheld pda PalmOS manualІгор Ко
This document is a user manual for the CLIÉ handheld. It provides instructions for basic operations of the device such as using the stylus and Jog Dial navigator. It also explains how to start and quit applications, customize settings, exchange and update files using HotSync, enter text, and more. The manual contains detailed sections on the Palm OS screen, applications, preferences, and other features to help users operate the CLIÉ handheld.
Siemens win cc manual win cc configuration manualDien Ha The
Siemens,
Catalog Thiết Bị Tự Động Siemens, Catalog Thiết Bị Tự Động
Catalog Phụ Kiện Siemens, Catalog Phụ Kiện,
Catalog Siemens, Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Siemens vui lòng gọi: 0907.764.966
The document describes several products from RNDplus including the Smart Showcase, EasyBoard, TouchAll Wall, and TouchALL HUB.
The Smart Showcase is an unmanned digital marketing system that provides product information to customers through touchscreens without salespeople. The EasyBoard is a portable multi-touch screen that transforms existing displays like projectors into interactive smart boards. The TouchAll Wall is an interior wall system that functions as a large touch screen. Finally, the TouchALL HUB is a portable multi-touch conference device.
Your VAIO computer comes with a rechargeable battery pack that provides portable power when not connected to an AC outlet. To use the battery pack, insert it into the battery connector on the bottom of the computer. The battery charges when the computer is connected to an AC power source with the supplied AC adapter. An indicator light on the computer illuminates to indicate the battery's charging status. For optimal battery performance, follow the safety guidelines for handling and charging the battery pack.
Digital Signage In Healthcare What You Need To Knowahelmey
This document provides guidance for healthcare providers on planning and budgeting for digital signage. It discusses key considerations like hardware, software, installation, content creation and management. Hardware includes monitors, media players, mounting equipment and cables. Software includes media player software which may have annual licensing fees. Installation includes on-site surveys and mounting the equipment. Content and management software are critical for creating engaging content tailored to different healthcare audiences. Annual support contracts and training should also be part of budget planning when implementing a digital signage solution.
The document discusses technology planning for a digital signage network. It recommends:
1. Using a hybrid network combining WiMAX, Wi-Fi, and satellite IP networking to provide wireless connectivity for digital signs over long and short ranges.
2. Deploying the Puppy Linux operating system on digital sign players for stability and low hardware requirements.
3. Using a "fat client" model where digital signs have local storage and processing power rather than relying entirely on a central server.
4. Evaluating campaigns based on the "immediate feedback response" metric, which measures how many viewers directly engage with the digital signs, such as by contacting sponsors.
This document is a user guide for the CV61 vehicle mount computer running Windows 7. It provides information about setting up and using the CV61, including how to mount, power, and connect accessories to the computer. It also describes the user interface, available Intermec applications, how to manage and configure the computer through Intermec Settings, and how to develop and install additional applications. The guide contains information about operating and maintaining the CV61 in a vehicle mount environment.
Digital Signage - The Locads ver 6.0.pptxenigma1234
We are dealing in all types of digital signages and digital advertisements accross malls, societies and public places. We offer advertisement, Digtal Signages, CMS, BackPack and digital services to our customer. We are having unique combination of CMS and a chain of hardware products to support it. As there is a growing demand for the digital advertisement across public platforms, we are engaging ourselves in providing our customer with latest technology solutions to fulfill their requirement and demand. Giving us a change to server will not disappoint you. Thanks
인터맥산업용PC Intermec CV61 12.1인치 차량탑재용 산업용패널PC 매뉴얼HION IT
인터맥 CV61은 차량탑재 (지게차 또는 자동차) 모바일 컴퓨터 중에 하나입니다.
강력한 64 비트 1.8GHz 인텔 ® 아톰 프로세서가 적용된 CV61은 Windows 7 Professional 또는 Windows XP 운영 체제 중에서 선택할 수 있습니다.
또한 CV61은 메모리를 많이 차지하는 ERP 및 창고관리시스템 (WMS) 을 지원하기 위해 최대 3GB RAM을 제공합니다.
드롭 인 교체가 쉽고 경제적입니다.
현재 인터맥 CV60 차량 탑재 컴퓨터를 사용중인 경우 CV61은 가장 빠르고 쉬운 마이그레이션 경로를 제공합니다.
CV60 마운팅, 케이블 링, 키보드, 트레이, 스캐너 및 프린터와 호환되도록 설계된 CV61은 비용과 설치 시간을 절약 해줍니다.
내장 된 9-60 VDC 전원 공급 장치는 설치 비용을 낮추고 지게차 배터리가 고장 나더라도 백업을 제공합니다. 옵션으로 제공되는 외부 고전압 및성에 제거 장치 전력 변환기는 물론 기존 CV60 전력 변환기와 함께 사용할 수있는 어댑터 케이블도 제공됩니다.
또한 IT 관리자는 사용자 관리, 보안, 안티 바이러스, 방화벽, 그룹 정책 및 소프트웨어 업데이트를위한 표준 엔터프라이즈 PC 관리 도구를 지원하므로 CV61을 사용하기가 쉽습니다. CV61 옵션 인 Intermec Client Pack 터미널 에뮬레이션 및 산업용 브라우저 소프트웨어는 창고관리시스템 (WMS) 에 빠르고 안정적이며 안전한 연결을 제공합니다. 또한 Intermec 개발자 툴킷을 사용하면 다중 장치 환경에서 응용 프로그램 소프트웨어를 마이그레이션하는 데 드는 시간을 절약 할 수 있습니다.
CV61은 편안하고 친숙하며 쉽게 습득 할 수 있습니다. 매우 밝은 12.1 인치 터치 스크린 디스플레이는 희미하게 빛나는 창고 환경과 햇빛이 비치는 야외에서 쉽게 읽을 수 있습니다. 터치 스크린과 견고한 외부 백라이트 키보드는 장갑을 낀 손으로 쉽게 데이터를 입력 할 수 있도록 설계되었습니다.
안정적인 성능
CV61은 네트워크 보안, 관리 시스템 및 회사 표준과 통합되도록 설계되었습니다.
포괄적 인 네트워크 옵션으로는 시스코® CCXv4 인증을 갖춘 802.11 a / b / g / n과 낮은 신호 레벨을 경험할 수있는 지역에서도 동급 최고의 무선 범위, 로밍 안정성 및 보안을위한 통합 EDR 2.1 Class 1.5 블루투스®가 포함됩니다. 간헐적인 연결. 또한 CV61은 Intermec의 Vocollect VoiceCatalyst ™로 핸즈프리 음성 작업의 정확성, 생산성 및 안전성을 제공합니다.
극한의 온도에 견디도록 제작 된 CV61은 -20 ° C ~ + 50 ° C (-4 ° F ~ + 122 ° F)에서 작동하며 냉장 보관 및 냉동실 환경을 위해 옵션으로 제공되는 터치 스크린 디프 로스터 (-30 ° C까지 -22F).
IP66 등급은 방진 및 압력 세척 기능을 통해 하드웨어를 보호하며 사용자가 교체 할 수있는 SSD (Solid State Disk) 스토리지는 가혹하고 진동이 심한 환경에서도 데이터 무결성을 유지합니다.
CV61과 호환되는 Intermec SR61 제품군의 산업용 핸드헬드 바코드 스캐너를 사용하여 작업배정, 위치확인, 로트추적을 하거나 예외적인 관리를 할 수 있습니다. 온도 변화, 낙하, 먼지 및 날씨와 같은 거친 현실을 견딜 수 있도록 설계되었습니다. 여분의 장거리 스캐닝을위한 옵션이있어 작업자가 지게차의 자리를 떠나지 않고 멀리서도 스캔 할 수 있으며 테더형 또는 블루투스 모델 중 하나에서 사용할 수 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions : 높이: 27.4cm (10.8”) x 폭: 34.3cm (13.5”) x 깊이: 8.4cm (3.3”)
Weight : 5.2 kg (11.5 lbs)
Display : 12.1”, XGA 1024x768, LED backlit
PERFORMANCE CHARACTERISTICS
CPU : Intel® Atom 64-bit D425 1.8GHz
Operating System : Choice of Microsoft Windows® 7 Professional or Windows XP Professional
Memory :
Standard 1GB DDR2 for Windows XP
tandard 2GB DDR2 for Windows 7
User-upgradeable up to 3GB memory total
WIRELESS COMMUNICATIONS
Wireless LAN : 802.11a/b/g/n
Security : WIFI Certified; WPA and WPA2 Security
Authentication : 802.1x
Cisco Compatibility : CCXv4 Certified
Antenna : Dual internal MIMO antennas or optional external primary antenna with auto-sensing feature
Bluetooth : Integrated Bluetooth 2.0+EDR, Class 1.5 (30m range)
INTERFACE
2 USB 2.0 ports with locking breakout cable, 2 RS-232 COM ports with +5V power, CAN-BUS port,
Mic/ Headset port, Stereo Speaker output, DC power input, WiFi primary antenna port with auto-sensing,
RJ45 10/100 Ethernet port, Legacy PS/2 keyboard input
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Similar to MIDAS Room & Resource Scheudling Software - Digital Signage Addon Documentation v1.01 (20)
A brief overview of some of the key features and benefits of MIDAS Room Booking software.
View more features at https://mid.as/features
Simply accessed through your favorite web browser, on your desktop, laptop, tablet or mobile device, MIDAS lets you see at a glance when your room bookings are scheduled in the calendar. The system also allows you to schedule staffing and equipment, send booking confirmations, reminders and invoices to clients, take bookings or booking requests through your public website, and put an end to double bookings and confusion once and for all!
As all you need is a modern web browser, your MIDAS booking system is readily available wherever you are! - Whether at the office, at home, or on the move - the information in your room booking system is right there at your fingertips!
MIDAS room booking software is available as either a cloud hosted SaaS (Software as a Service) solution, or as a self-hosted "on-premises" solution where it may be downloaded, installed, and run from your own server.
We also offer a no risk 30-day FREE trial! - Get yours today at https://mid.as/free-trial
This is the complete User Manual for MIDAS (https://mid.as/)
MIDAS is a leading room booking system giving you complete control over your room bookings and resource scheduling, and trusted by organizations and businesses of all shapes and sizes around the world.
Simply accessed through your favorite web browser, on your desktop, laptop, tablet or mobile device, the software lets you see at a glance when your room bookings are scheduled in the calendar. The system also allows you to schedule staffing and equipment, send booking confirmations, reminders and invoices to clients, take bookings or booking requests through your public website, and put an end to double bookings and confusion once and for all!
As all you need is a modern web browser, your MIDAS booking system is readily available wherever you are! - Whether at the office, at home, or on the move - the information in your room booking system is right there at your fingertips!
MIDAS room booking software is available as either a cloud hosted SaaS (Software as a Service) solution, or as a self-hosted "on-premises" solution where it may be downloaded, installed, and run from your own server.
We also offer a no risk 30-day FREE trial! - see https://mid.as/free-trial
Complete 84-page User and Administrative Guide to MIDAS v4.15.
MIDAS (https://mid.as) is a powerful and intuitive browser-based scheduling system that gives you complete control over your room bookings & resource scheduling. Accessed entirely from your favorite web browser, see at a glance when your bookings are scheduled, manage staffing & equipment, send confirmations & invoices to clients, take booking requests through your website, and put an end to confusion & double bookings once and for all!
As all you need is a browser, your MIDAS booking system is readily available wherever you are! - Whether at the office, at home, or on the move - from your desktop, laptop, tablet or mobile device - your booking information is right at your fingertips! Available to download (for use on your own server), or as cloud hosted SaaS (Software as a Service), MIDAS drastically cuts down on your costs, by streamlining the time spent on booking & administrative tasks, and reducing the amount of paperwork!
Manuals for other versions may be obtained via https://mid.as/manuals
MIDAS Room & Resource Scheduling Software - API Documentation v1.02MIDAS
Complete API documentation for MIDAS Web Based Room and Resource Scheduling Software. Our optional API allows you to interface with the scheduling system from your own web sites/applications. Find our more at http://mid.as/api
MIDAS - Web Based Room & Resource Scheduling Software - User ManualMIDAS
This is the complete User Manual for MIDAS (http://mid.as/), a complete web based scheduling solution giving you complete control over your room bookings & resource scheduling. You can find out more about MIDAS at http://mid.as/
MIDAS (http://mid.as/) is a complete web based scheduling solution that gives you complete control over your room bookings & resource scheduling. This presentation outlines some of the features of the software. You can find out more at http://mid.as/
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on automated letter generation for Bonterra Impact Management using Google Workspace or Microsoft 365.
Interested in deploying letter generation automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Skybuffer SAM4U tool for SAP license adoptionTatiana Kojar
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
A Comprehensive Guide to DeFi Development Services in 2024Intelisync
DeFi represents a paradigm shift in the financial industry. Instead of relying on traditional, centralized institutions like banks, DeFi leverages blockchain technology to create a decentralized network of financial services. This means that financial transactions can occur directly between parties, without intermediaries, using smart contracts on platforms like Ethereum.
In 2024, we are witnessing an explosion of new DeFi projects and protocols, each pushing the boundaries of what’s possible in finance.
In summary, DeFi in 2024 is not just a trend; it’s a revolution that democratizes finance, enhances security and transparency, and fosters continuous innovation. As we proceed through this presentation, we'll explore the various components and services of DeFi in detail, shedding light on how they are transforming the financial landscape.
At Intelisync, we specialize in providing comprehensive DeFi development services tailored to meet the unique needs of our clients. From smart contract development to dApp creation and security audits, we ensure that your DeFi project is built with innovation, security, and scalability in mind. Trust Intelisync to guide you through the intricate landscape of decentralized finance and unlock the full potential of blockchain technology.
Ready to take your DeFi project to the next level? Partner with Intelisync for expert DeFi development services today!
Best 20 SEO Techniques To Improve Website Visibility In SERPPixlogix Infotech
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Building Production Ready Search Pipelines with Spark and MilvusZilliz
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Ocean lotus Threat actors project by John Sitima 2024 (1).pptxSitimaJohn
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
Monitoring and Managing Anomaly Detection on OpenShift.pdfTosin Akinosho
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providersakankshawande
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
2. Digital Signage Documentation
V1.0
Table of Contents
Table of Contents ....................................................................................................................................................1
MIDAS Digital Signage Addon ......................................................................................................................................2
Overview.................................................................................................................................................................2
Pre-Requisites .........................................................................................................................................................2
Typical Infrastructure Configurations ......................................................................................................................3
Single signage screen...........................................................................................................................................3
Multiple signage screens all showing the same content .......................................................................................3
Two signage screens showing different content from a single computer .............................................................3
Multiple signage screens showing different content ............................................................................................4
Installing the Addon ................................................................................................................................................4
Settings ...................................................................................................................................................................5
Current Screens...................................................................................................................................................5
Variables - Global ................................................................................................................................................5
Variables - Fields .................................................................................................................................................5
Enabled? .............................................................................................................................................................6
Screen Number ...................................................................................................................................................6
Screen Name .......................................................................................................................................................6
Screen URL ..........................................................................................................................................................6
Max Items on Screen ...........................................................................................................................................6
Screen Refresh ....................................................................................................................................................6
Next Screen .........................................................................................................................................................6
Limit Screen To....................................................................................................................................................6
Screen Preview....................................................................................................................................................6
Screen Template .................................................................................................................................................7
Custom .css Stylesheet ........................................................................................................................................7
Save Changes ......................................................................................................................................................7
Implementing your Signage .....................................................................................................................................7
Appendix A – Global Variables.....................................................................................................................................8
Appendix B – Field Variables .......................................................................................................................................9
Appendix C – Template Example ............................................................................................................................... 10
Release Notes ........................................................................................................................................................... 11
http://mid.as/signage
Page |1
3. Digital Signage Documentation
V1.0
MIDAS Digital Signage Addon
Overview
The optional Digital Signage addon for MIDAS allows you to automatically display a stream of upcoming bookings on
display devices (screens) within communal areas of your venue, and/or outside individual rooms.
Pre-Requisites
In order to use this addon, you will need to have display devices (TV/Monitors) installed in your venue. These
screens should be connected to a computer with a network connection to the server where your MIDAS resides. If
you wish to have multiple screens displaying different content at the same time (in the case of a separate screen
outside each room showing only that room’s bookings), each screen will require a connection to a different
computer which in turn has a network connection to the server where your MIDAS resides.
Note: Display devices, computers, and any other associated hardware and infrastructure are not provided by MIDAS.
A basic knowledge of HTML is also required to compose your screen template
http://mid.as/signage
Page |2
4. Digital Signage Documentation
V1.0
Typical Infrastructure Configurations
Single signage screen
(1 computer (with a connection to MIDAS), 1 display device)
Multiple signage screens all showing the same content
(1 computer (with a connection to MIDAS), 1 VGA splitter/distribution amplifier (or similar), multiple display devices)
Two signage screens showing different content from a single computer
(1 computer (with a connection to MIDAS) with a dual-head graphics card), two display devices)
http://mid.as/signage
Page |3
5. Digital Signage Documentation
V1.0
Multiple signage screens showing different content
(Multiple computers (with connections to MIDAS), multiple display devices)
Installing the Addon
The Signage addon is available as an option for MIDAS v4.03 (or later), that can be purchased along with MIDAS, or
added at a later stage.
•
•
To purchase MIDAS and the Signage addon, please visit: http://mid.as/purchase
To add the Signage addon to an existing MIDAS installation, please go to MIDAS Admin Options → Manage
Addons → Available Addons → Signage
Once purchased, the Signage addon will become available for one-click installation via MIDAS Admin Options →
Manage Addons → Addons Ready To Install → Signage
Once installed, various Digital Signage settings are available via MIDAS Admin Options → Manage Addons →
Installed Addons → Signage
http://mid.as/signage
Page |4
6. Digital Signage Documentation
V1.0
Settings
Above: The Signage administrative interface (MIDAS Admin Options → Manage Addons → Installed Addons → Signage)
From this screen you can define and design the content of each of your display screens. The following settings may
be found in this area…
Current Screens
This is a list of all the signage screens you’ve already defined.
To define a new screen, click “Add New” below the list.
To set an existing screen to be the “default” screen, highlight it in the “Current Screens” list and click “Set as
Default”. An asterisk will denote the current “default” screen.
Any display device not set to display a specific screen will display the “default” screen instead.
To remove a screen, select it and click the “Delete” button.
Variables - Global
Lists a number of variables that you can use within your screen templates.
These variables will be substituted for corresponding content on your actual display screens.
A full list of Global Variables and their meanings may be found in Appendix A
Variables - Fields
Similar to global variables, when field “field” variables are used within your screen templates, they are substituted
with live data from corresponding booking fields on your actual display screens.
A full list of Field Variables and their meanings may be found in Appendix B
Field variables must be placed within <bookings>…</bookings> tags
http://mid.as/signage
Page |5
7. Digital Signage Documentation
V1.0
Enabled?
Allows you to “disable” individual screens. When a screen is disabled it will not show any booking information on
your display devices, and instead display a “Screen Currently Disabled” message.
Screen Number
The internal number representing the screen you are currently defining.
This number cannot be changed, but is used for screen addressing. For example, to display Screen Number 4 on a
display device, the URL for that device would be http://your_midas_url/signage.pl?screen=4
Screen Name
A name by which you can use to identify the screen you are defining.
This name will appear in the “Current Screens” list and can be shown on your display device if desired through the
inclusion of the %SCREENNAME% variable within your screen templates
Screen URL
The URL which you should point your display device(s) to in order to display the screen you’re currently configuring
Max Items on Screen
The maximum number of bookings that will be shown on the screen at any one time. Depending upon the font size
used, and the resolution of your display devices, you may need to increase/decrease this number. The default is 5
Screen Refresh
How frequently (in minutes) booking data on the screen should refresh.
Next Screen
If left blank, when the Screen Refresh interval is reached, the current screen will simply refresh.
If a “Next Screen” is specified, when the Screen Refresh interval is reached, the selected “Next Screen” will be
displayed. This allows you to create “PowerPoint-like” “slide shows” of your screens! For example, on a single display
device you could have Screen 1 showing for 2 minutes, followed by Screen 2 showing for 5 minutes, and then Screen
1 again, etc
Limit Screen To
These settings allow you to control which bookings should be included on the current screen. By default “All Venues”
and “All Booking Types” will be shown.
This is useful if you have a general display device in a reception area showing an overview of every bookings.
You can “untick” either of these options to limit the range of venues/booking types that are shown.
For example, if you have a dedicated display device situated directly outside “Meeting Room A”, you may only want
to display bookings for “Meeting Room A” on that particular screen. You would therefore untick “All Venues”, and
select just “Meeting Room A” from the venues list
Screen Preview
An example of how your screen will look on your display device.
Modifications to the Screen Template (see below) will be shown here in real time.
http://mid.as/signage
Page |6
8. Digital Signage Documentation
V1.0
Screen Template
This is where you design the look and content of your screen using standard HTML code, Global, and Field variables.
Several template examples may be found in Appendix C
Custom .css Stylesheet
If you are familiar with .css (Cascading Style Sheets), this field allows you to specify the URL to your custom
Stylesheet that will be used when displaying the screen.
Save Changes
Once you’re happy with your screen settings and template, click the “Save Changes” button to save your settings.
You can edit the template and/or settings for a previously saved screen at any time by simply selecting it in the
“Current Screens” list.
Implementing your Signage
Once you’ve defined your screen(s) the next stage is to make them appear on your signage devices.
To display the same screen on one or more signage devices, your signage devices need to be connected to a
computer with a modern web browser and a network connection to the server where your MIDAS resides.
1) Open your web browser on the computer connected to your display devices, and navigate to:
http://your_midas_url/signage.pl
2) Whichever screen you’ve set as the “default” screen (or in the case where only one screen has been defined,
this screen) will then be displayed in your browser (and therefore also on your connected signage device)
3) Make your browser “full screen”. If you’re running a modern browser that supports the full screen API, you
can simply click within your signage screen, and MIDAS will automatically place your browser in full screen
mode (Note: MIDAS also automatically hides your cursor if it is “hovering” within your signage screen)
To display different screens on different display devices around your venue, each display device will need connecting
to a different computer with a modern web browser and a network connection to the server where your MIDAS
resides, or a single computer with a multi-head graphics card.
Setup each computer as above, but append “?screen=x” to the end of the URL, where “x” is the number of the
screen number you’ve setup within MIDAS that you wish to display on this device – i.e.
http://your_midas_url/signage.pl?screen=1
So, to display Screen 1 on one display device and Screen 2 on another display device, you would need to point their
respective computers to:
http://your_midas_url/signage.pl?screen=1
http://your_midas_url/signage.pl?screen=2
http://mid.as/signage
Page |7
9. Digital Signage Documentation
V1.0
Appendix A – Global Variables
The following global variables may be used within your Screen Templates and will be substituted for corresponding
content on your display devices.
Variable
%BUILD%
%BUILDDATE%
%DATABASE%
%DATETIME%
%LOGO%
%MIDASLOGO%
%SCREENNAME%
%SCREENNUMBER%
%TODAY%
%VERSION%
http://mid.as/signage
Description
Current MIDAS build number
Current MIDAS build date/time
The name of your current MIDAS database (usually your
Organization name). You can rename your database via MIDAS
Admin Options → Manage MIDAS → Database
The current date/time shown in the format defined via MIDAS
Admin Options → Manage MIDAS → Appearance → Date/Time
Settings
Your company/organization logo.
Please see “How to add your company/corporate logo”
The MIDAS logo
The name of the current screen
The internal number of the current screen
A “nice” representation of the current date
Current MIDAS version
Example value
1333703520
6/4/2012 @ 09:12
My Company
30/7/2013 @ 20:15
<Your logo>
<MIDAS logo>
Screen 1
1
Tuesday, July 20, 2013
v4.03
Page |8
10. Digital Signage Documentation
V1.0
Appendix B – Field Variables
Field variables must be contained within a set of “booking tags” within your template – these “booking tags” define
the section of code that is to be repeated (looped) for each booking to be displayed. For template examples, please
see Appendix C
Booking Tags
<bookings></bookings>
<bookings_now></bookings_now>
<bookings_next></bookings_next>
Description
This will display ongoing and upcoming bookings for the rest of the day
This will only display bookings which are taking place at the present time
This will only display bookings for the remainder of the day which have yet to
start
The following variables can be used within a set of booking tags in your Screen Templates and correspond to booking
fields within MIDAS. These variables will be automatically substituted with booking data on your display devices.
Setting
%ATTENDEES%
%CLIENT%
%FINISH%
%NOTES%
Description
Number of attendees
Name of client
Booking finish time
Booking notes
%ONGOING%
Assigns an “ongoing” style class to the template element if the booking is
ongoing. This could be used to display bookings currently taking place in a
different color to other bookings. See Appendix C for examples
Client’s organization
List of resources assigned to booking
%ORG%
%RESOURCES%
%START%
%TYPE%
%VENUE%
%CUSTOM_x%
Booking start time
Booking type
Name of venue
If you’ve defined your own custom booking fields within MIDAS, you can
include them on your screens using the “%CUSTOM_x%” variable (where “x”
is the internal name of your custom booking field).
For example, if you’ve added a custom field to your MIDAS named “Room
Layout”, you would include data from this field on your signage screen with
the variable “%CUSTOM_ROOM_LAYOUT%”
http://mid.as/signage
Example value
10
Joe Bloggs
10:00
This booking may
finish early
My Company
x1 Laptop
x1 Data Projector
09:00
Internal Meeting
Meeting Room A
Page |9
11. Digital Signage Documentation
V1.0
Appendix C – Template Example
Below is a typical Screen Template example, how it may appear on your display device, and a detailed explanation of
how the template translates to what your visitors will see on screen…
Example Screen Template
<h1>Today's Bookings</h1>
<h2>%TODAY%</h2>
<h3>%DATABASE%</h3>
<table>
<tr>
<td>Times</td>
<td>Venue</td>
<td>Booking Type</td>
<td>Client</td>
</tr>
<bookings>
<tr%ONGOING%>
<td>%START% - %FINISH%</td>
<td>%VENUE%</td>
<td>%TYPE%</td>
<td>%CLIENT%</td>
</tr>
</bookings>
</table>
<br>Thank You For Visiting Us Today!
Example Screen Output
Today’s Bookings
Tuesday, July 30, 2013
My Company
Times
08.00 – 09.00
09.00 – 11.30
09.15 – 10.45
Venue
Room 1
Room 4
Room 2
Booking Type
Meeting
Training
Exam
Client
Joe Bloggs
Jane Doe
Joe Bloggs
Thank You For Visiting Us Today!
Powered by MIDAS
http://mid.as/signage
P a g e | 10
12. Digital Signage Documentation
V1.0
Explanation
This simple screen starts by displaying 3 headings (<h1>, <h2>, and <h3>).
“Today’s Bookings” is the first “static” heading.
The other two headings use global variables in the template, which are substituted with corresponding values when
displayed on your display device(s).
The next section of the template is a standard HTML table.
The first row contains columns names for “Times”, “Venue”, “Booking Type”, and “Client”
Notice that the second row of the table is surrounded by <booking></booking> tags (indicated in blue) – this
indicates to MIDAS that this section of code should be repeated for each booking displayed.
In this example, because the second table row is enclosed within <booking></booking> tags, a new row will be
inserted for each booking. (Note: <booking></booking> tags will be automatically stripped from the final output
display in order to generate valid HTML)
The field variables in this row are substituted for real booking data when displayed on your display device(s)
Note the presence of the %ONGOING% variable (indicated in green) – this tells MIDAS that if the booking is
currently ongoing (“in progress”) to apply an “ongoing” class to the element.
So, for ongoing bookings <tr%ONGOING%> would be substituted with <tr class=ongoing>
For all other bookings, <tr%ONGOING%> would be substituted with <tr>
If we assume that the Example Screen Output shown above was what was displayed on the screen at 08.15 in the
morning – at that point in time, one booking is “ongoing” – the one highlighted on the screen in red.
You could define the color/style of our “ongoing” class in an external style sheet and then include it using the
“Custom .css Stylesheet” option.
In your external style sheet, you can change the styling of this special “ongoing” class, as follows:
.ongoing{color:yellow}
Release Notes
v1.00
1st August 2013
Initial release
v1.01
14th October 2013
Bug Fixes
For the most up-to-date documentation, please visit http://mid.as/signage
http://mid.as/signage
P a g e | 11