This document introduces an ISO 9001:2000 certified manufacturer based in the UAE called Electronic Control Systems and Power Protection Equipment. It describes their flagship product called Powermatic, which is a microprocessor-based automatic power protection device that prevents unstable electricity from reaching equipment. Powermatic monitors the electricity supply and only connects it to devices when the power quality is stable. It disconnects power within 20 milliseconds when disturbances are detected. The document lists over 9 types of Powermatic devices and teases future products like Genmatic and Datamatic.

1. General Manager Hazim Al Hajaj Nov. 2008

2. Whom we are… Electronic Control Systems and Power Protection Equipment ISO 9001: 2000 Certified Manufacturer Based In UAE ISO 9001: 2000 Certified Manufacturer

3. Why us? Our uniqueness POWERMATIC Microprocessor Based Automatic Power Protection Device Prevents Unstable Electric Supply From Connecting to Electrical Equipment & Electronic Appliances Fast Response Within 20 Milliseconds

4. Why we are Special…

5. How it work After the main power supply (Mains) is switched ON, Powermatic will monitor the Mains and withhold it from reaching the connected equipment. If the Mains is stable (Yellow state), Powermatic continues to monitor the power quality for a certain determined time. If the power quality is within the preset limits, Powermatic will then connect Mains to the equipment (Green state). However; Powermatic will continue to monitor power quality. Powermatic disconnects whenever it detects power disturbances (Red state). When Mains resumes stable, Powermatic continues monitoring the power quality for a certain determined time.

6. Powermatic types More than 9 Types: P6CE P6C P20C P20M PE4G P6CU P8CR P304CU P314CR

7. Achievements…

8. Future Products… Genmatic Datamatic

9. WINDOWS WORDS…

10. Thank You

11. P6CE Back>>

12. P6C Back>>

13. P20C Back>>

14. P20M Back>>

15. PE4G Back>>

16. P6CU Back>>

17. P8CR Back>>

18. P304CU Back>>

19. P314CR Back>>

20. Genmatic … Generator set Automatic Controller Computerised control unit to offer full supervision and control of stand-by generator sets. It provides mains supply monitoring, engine status and protection. Also the automatic engine operation and changeover of power supply when mains failure occurs Back>>

21. Datamatic… Production Floor Data Capture System Fully automatic real time data collection of a select number of measures and data for using to analyse the performance of the man & machine to improve the efficiency of the working plant Back>>