Lumvatech is a US manufacturer of ultra-thin planar light panels for LED backlighting. They produce light panels ranging from 0.005 to 0.125 inches thick for applications such as tactile switches, capacitive touch interfaces, and logo nameplates. Lumvatech can deliver prototypes within 2 weeks and production runs within 4 weeks depending on complexity, with production capacity of 20 million square inches per month. Their light panels provide targeted, consistent backlighting with minimal light leakage.

1. A U.S. Manufacturer of Ultra Thin Planar
Light Panels for LED Backlighting

2. Lumvatech Private and Confidential - Do Not Distribute
2
overview
Pixels creating the illuminated image
are embedded inside the light panel.
Embedding the image inside the panel
ensures surface integrity.
Prototypes in as little as 2 weeks built
with production quality tools.
Production in 4 weeks depending on
complexity.
This process IP (intellectual property)
is owned solely by Lumvatech.

3. Lumvatech Private and Confidential - Do Not Distribute
3
Light panels can be created from 0.005 to 0.125
inch thick polycarbonate to accommodate any
stack up
Panel size can range from small (<1 inch) to large
panels (>12 x 18 inches) The HMI solution can be
large or small using single or multiple light panels
Side or direct fire LEDs can be used as a light
source to address specific mechanical constraints
Our optical isolation techniques reduces light
leakage by 85-100%
overview

4. Lumvatech Private and Confidential - Do Not Distribute
4
overview
KeyBright ultra thin planar light panels enable targeted consistent backlighting of tactile dome
switch keypads, capacitive touch interfaces, and logo nameplates
Cap touch thru light, moves the LEDs and power away from the sensor
for interference free sensing
Tactile response is maintained with flexible panels ranging from 0.005 to 0.015 inch thin
Non-tactile light panels up to 0.125 inch thick
Visual feedback is achieved
by turning on & off isolated,
individual lit sections and
indicators.
Motion and special effects
can be added to any area.

5. Lumvatech Private and Confidential - Do Not Distribute
5
overview
The Lumvatech process offers low
tooling cost.The panel can be tuned
to optimize the entire backlight
solution, not just the light panel.
Quick turn prototyping and
computer based tooling make quick
change and fine tuning possible.

6. Lumvatech Private and Confidential - Do Not Distribute
6
overview
Lumvatech integrates our custom
light panels and your prototype
boards, graphic overlay, switch panel,
or logo nameplate for customer
evaluation within 2 weeks.
The Lumvatech process is
automated and repeatable allowing
very high volume production
capability. Lumvatech can produce
20 million square inches of light
panels per month.

7. Lumvatech Private and Confidential - Do Not Distribute
7
overview
Design, engineering, and
manufacturing facility is in Anderson,
South Carolina
Quick and clear communication
between customer, engineering and
production

8. Lumvatech Private and Confidential - Do Not Distribute
8
summary
Light guide material suitable for medical, industrial & commercial applications
Smooth planar solution from 0.005 to 0.125 thin - Consistent, uniform, tunable custom lighting
Sub $1,000 NRE/tooling fee - 2 week prototype delivery - 4 week production lead time
Quick turn modifications during prototype phase - Internationally competitive pricing
Worldwide shipment and customer base - Measurable uniformity
20 million square inches monthly light panel production capacity
Custom solutions for tactile dome, membrane & capacitive touch switches
Lumvatech LLC
94 Northwest Drive
Anderson, SC 29625