The document provides information on servicing a diesel engine. It begins with identifying the engine model and serial number. The second part describes general precautions for maintenance and servicing such as arranging removed parts carefully, using special tools as required, and disconnecting the battery before working on live wires. The third part lists maintenance check points to perform daily, every 50 hours, 250 hours, 500 hours and so on.
Kubota v3 e3 b series diesel engine service repair manualufjjsjkkekmmd
This document provides service technicians with information on servicing and maintaining various Kubota diesel engine models. It is divided into three main parts: General, Mechanism, and Servicing.
The General section includes information on engine identification, general precautions, maintenance checklists, and maintenance schedules. It outlines daily, initial 50 hour, every 50 hour, every 250 hour, every 500 hour, and annual maintenance checks. It also identifies special tools required for servicing.
The Mechanism section describes the engine construction and functions.
The Servicing section provides information on troubleshooting, service specifications, torque specifications, adjustments, disassembly/assembly procedures, and other servicing tasks. It covers maintenance, repair, and
Kubota v3600 t-e3 b diesel engine service repair manualfusjejkdkmse
This document provides service technicians with information on servicing and maintaining various Kubota diesel engine models. It is divided into three parts covering general information, engine mechanisms, and servicing procedures.
The general section includes instructions on identifying engine models, general safety precautions, maintenance checklists, and maintenance schedules. Technicians are advised to check specific components and systems daily, every 50 hours, 250 hours, 500 hours, and longer intervals. The document also lists special tools needed for servicing tasks.
Kubota v3300 e2 b diesel engine service repair manualfusjejkdkmse
This workshop manual provides information on servicing the V3300-E2B and V3300-T-E2B diesel engines. It is divided into three parts: General, Mechanism, and Servicing. The General section includes engine identification, general precautions, maintenance checklists, and check and maintenance procedures. The Mechanism section describes the engine construction and functions. The Servicing section covers troubleshooting, specifications, torque values, adjustments, disassembly/assembly procedures, and servicing. The manual is intended to inform service personnel about servicing and maintaining these engines.
Kubota v3600 t-e3 bg diesel engine service repair manualjfkseksmemqw
This document provides specifications and maintenance information for several Kubota diesel engine models:
- It lists technical specifications such as engine type, displacement, power output, lubrication system, and dimensions for each model.
- The maintenance section outlines check points that should be performed daily, every 50 hours, 250 hours, 500 hours, and other intervals, such as checking fluid levels, changing filters, and inspecting components for wear.
- Special tools needed for maintenance and repair work are listed at the end.
Kubota v3800 di t-e3bg diesel engine service repair manualfjjsekfxswzksmem
This document provides specifications for several Kubota diesel engine models including the V3600-E3B, V3600-T-E3B, V3800DI-T-E3B, V3300-E3BG, V3600-T-E3BG, and V3800DI-T-E3BG. It lists technical details such as the number of cylinders, displacement, power output, operating speed range, lubrication system, cooling system, and dimensions. The specifications are divided into standard engine specifications and conversion formulas.
Kubota v3600 t-e3 b diesel engine service repair manualjfkseksmemqw
This document provides specifications and information for Kubota diesel engines models V3600-E3B, V3600-T-E3B, V3800DI-T-E3B, V3300-E3BG, V3600-T-E3BG including their dimensions, performance curves, and maintenance checklists. The document is divided into sections covering the engine identification, general precautions, maintenance checklists, and check and maintenance procedures to be performed at regular intervals. Specifications provided for each model include their power output, displacement, injection system details, lubrication system, and weight. Dimensions and performance curves are also included.
Kubota v3300 e3 bg diesel engine service repair manualjfjkskefksmem
This document provides specifications for several Kubota diesel engine models including the V3600-E3B, V3600-T-E3B, V3800DI-T-E3B, V3300-E3BG, V3600-T-E3BG, and V3800DI-T-E3BG. It lists technical details such as the number of cylinders, displacement, power output, operating speed range, lubrication system, cooling system, and dimensions. The specifications are divided into standard engine specifications and conversion formulas.
Kubota v3800 di t-e3cb diesel engine service repair manualjfjkskefksmem
This document provides specifications and maintenance information for several Kubota diesel engine models:
- It lists technical specifications such as engine type, displacement, power output, lubrication system, and dimensions for each model.
- The maintenance section outlines checklists and maintenance schedules, with inspection points divided into daily, 50-hour, 250-hour, 1000-hour, and longer intervals.
- Safety instructions are provided to warn technicians of hazards when servicing the engines.
Kubota v3 e3 b series diesel engine service repair manualufjjsjkkekmmd
This document provides service technicians with information on servicing and maintaining various Kubota diesel engine models. It is divided into three main parts: General, Mechanism, and Servicing.
The General section includes information on engine identification, general precautions, maintenance checklists, and maintenance schedules. It outlines daily, initial 50 hour, every 50 hour, every 250 hour, every 500 hour, and annual maintenance checks. It also identifies special tools required for servicing.
The Mechanism section describes the engine construction and functions.
The Servicing section provides information on troubleshooting, service specifications, torque specifications, adjustments, disassembly/assembly procedures, and other servicing tasks. It covers maintenance, repair, and
Kubota v3600 t-e3 b diesel engine service repair manualfusjejkdkmse
This document provides service technicians with information on servicing and maintaining various Kubota diesel engine models. It is divided into three parts covering general information, engine mechanisms, and servicing procedures.
The general section includes instructions on identifying engine models, general safety precautions, maintenance checklists, and maintenance schedules. Technicians are advised to check specific components and systems daily, every 50 hours, 250 hours, 500 hours, and longer intervals. The document also lists special tools needed for servicing tasks.
Kubota v3300 e2 b diesel engine service repair manualfusjejkdkmse
This workshop manual provides information on servicing the V3300-E2B and V3300-T-E2B diesel engines. It is divided into three parts: General, Mechanism, and Servicing. The General section includes engine identification, general precautions, maintenance checklists, and check and maintenance procedures. The Mechanism section describes the engine construction and functions. The Servicing section covers troubleshooting, specifications, torque values, adjustments, disassembly/assembly procedures, and servicing. The manual is intended to inform service personnel about servicing and maintaining these engines.
Kubota v3600 t-e3 bg diesel engine service repair manualjfkseksmemqw
This document provides specifications and maintenance information for several Kubota diesel engine models:
- It lists technical specifications such as engine type, displacement, power output, lubrication system, and dimensions for each model.
- The maintenance section outlines check points that should be performed daily, every 50 hours, 250 hours, 500 hours, and other intervals, such as checking fluid levels, changing filters, and inspecting components for wear.
- Special tools needed for maintenance and repair work are listed at the end.
Kubota v3800 di t-e3bg diesel engine service repair manualfjjsekfxswzksmem
This document provides specifications for several Kubota diesel engine models including the V3600-E3B, V3600-T-E3B, V3800DI-T-E3B, V3300-E3BG, V3600-T-E3BG, and V3800DI-T-E3BG. It lists technical details such as the number of cylinders, displacement, power output, operating speed range, lubrication system, cooling system, and dimensions. The specifications are divided into standard engine specifications and conversion formulas.
Kubota v3600 t-e3 b diesel engine service repair manualjfkseksmemqw
This document provides specifications and information for Kubota diesel engines models V3600-E3B, V3600-T-E3B, V3800DI-T-E3B, V3300-E3BG, V3600-T-E3BG including their dimensions, performance curves, and maintenance checklists. The document is divided into sections covering the engine identification, general precautions, maintenance checklists, and check and maintenance procedures to be performed at regular intervals. Specifications provided for each model include their power output, displacement, injection system details, lubrication system, and weight. Dimensions and performance curves are also included.
Kubota v3300 e3 bg diesel engine service repair manualjfjkskefksmem
This document provides specifications for several Kubota diesel engine models including the V3600-E3B, V3600-T-E3B, V3800DI-T-E3B, V3300-E3BG, V3600-T-E3BG, and V3800DI-T-E3BG. It lists technical details such as the number of cylinders, displacement, power output, operating speed range, lubrication system, cooling system, and dimensions. The specifications are divided into standard engine specifications and conversion formulas.
Kubota v3800 di t-e3cb diesel engine service repair manualjfjkskefksmem
This document provides specifications and maintenance information for several Kubota diesel engine models:
- It lists technical specifications such as engine type, displacement, power output, lubrication system, and dimensions for each model.
- The maintenance section outlines checklists and maintenance schedules, with inspection points divided into daily, 50-hour, 250-hour, 1000-hour, and longer intervals.
- Safety instructions are provided to warn technicians of hazards when servicing the engines.
Mc cormick mtx tier3 restyling (2009 ) - rpd1 - 120 tractor service repair m...fusjejkdkmse
This document provides a list of components for an engine assembly. It includes the part numbers, descriptions, quantities and other relevant information for each component. Notes indicate things like serial number ranges a part is used for, whether it is a replacement part, and page references for additional details. The list contains over 100 unique components that make up the engine.
Mc cormick mc power6 tier 3 (2007 2010) - rpa1 - 135 tractor service repair m...fusjejkdkmse
This document contains parts lists and diagrams for engine components. It lists part numbers, descriptions, quantities and references other pages for an MC POWER6 Tier 3 engine from 2007-2010. Replacement part numbers are indicated along with shim sizes and other technical specifications for the various engine parts.
Mc cormick mc power6 tier 3 (2007 2010) - rpa1 - 120 tractor service repair m...fusjejkdkmse
This document contains parts lists and diagrams for engine components. It lists part numbers, descriptions, quantities and references other pages for an MC POWER6 Tier 3 engine from 2007-2010 for an RPA1 machine. Replacement part numbers are indicated. Dimensions and other specifications are provided for some components.
Mc cormick mc power4 tier 3 restyling (2009 2013) - rpb2 - 120 tractor servic...fusjejkdkmse
This document contains parts listings and component assemblies for engines. It includes listings of individual parts, part numbers, quantities and references other component assemblies. It notes that some components are not serviced and to order replacement assemblies instead, and provides engine model and manufacturer information.
Mc cormick mb series tier 2 (limited market) (2005 ) - rt61 - mb75 tractor s...fusjejkdkmse
This document provides component part information for engine repairs and replacements. It includes lists of parts with identification numbers, part names, quantities needed and other technical specifications. The parts are grouped by component assembly and include specifications like serial number ranges and replacement instructions.
Mc cormick mb series tier 2 (limited market) (2005 ) - rt61 - mb65 tractor s...fusjejkdkmse
This document contains parts listings and technical specifications for engine components. It includes items like pumps, gears, shafts, springs, valves, pistons, rods, bearings, plugs, and other engine parts. Each item lists properties like part numbers, quantity needed, replacement status, and technical details like torque specs or shim sizes. It provides the information needed to service and replace parts for this engine.
Mc cormick mb series tier 1 (limited market) (2002 2005) - rt60 - mb85 tracto...fusjejkdkmse
This document provides a list of components that make up an engine assembly. It includes over 40 individual parts, each with a reference number, description, and quantity. Additional information is provided on fit type and replacement quantities. The components are for a McCormick tractor engine from 2002-2005.
Mc cormick mb series tier 1 (limited market) (2002 2005) - rt60 - mb75 tracto...fusjejkdkmse
This document provides a list of components that make up an assembly. It includes the reference number, description, quantity and other information for each component. Some key details include:
- There are over 40 individual components listed, ranging from gears and shafts to screws, pins, and plugs.
- Additional information is provided for some components, such as replacement part numbers, fitting types (slip fit, press fit), and quantity breakdowns for different production volumes.
- Component descriptions refer to other reference numbers, indicating they are sub-assemblies or parts of other components.
- Notes provide additional instructions such as indicating some components are not serviced individually.
So in summary, this document details
Mc cormick gx series tier 3 (2004 2007) - rp81 - gx45 gxh45 tractor service ...fusjejkdkmse
This document provides parts information for engine components. It includes images and part numbers for items like pistons, rods, bearings, gaskets, bolts and other engine parts. The document references replacement part kits and notes when parts are available in oversized or undersized variants. It also provides assembly references to other documents.
Mc cormick gx series tier 1 (2002 2004) - rp80 - gx50 gxh50 tractor service ...fusjejkdkmse
This document contains parts information for components of an engine assembly, including identification numbers, part names, quantities, and other specifications. It provides replacement part numbers for overhauling or repairing engine components. Notes classify parts as standard or over/under-sized and indicate quantity breakdowns for different production volumes. The document appears to be pages from a service manual or parts catalog.
Komatsu wa250 6 wheel loader service repair manual (sn 76001 and up)fusjejkdkmse
1. The document is a shop manual that provides instructions for maintenance and repair of Komatsu WA250-6 wheel loaders.
2. It details procedures for disassembly and assembly of various components, including the engine, fuel system, and cooling system.
3. Safety precautions are outlined, such as lowering equipment, blocking wheels, disconnecting batteries, and wearing protective equipment when working on the loader.
Komatsu wa250 5 l wheel loader service repair manual sna73001 and upfusjejkdkmse
This document provides instructions for removing and installing a fuel injection pump assembly and nozzle holder assembly on a Komatsu WA250-5L/WA250PT-5L wheel loader. Key steps include disconnecting fuel lines and tubes, removing mounting nuts and brackets, using matching pins to align timing, and torquing fasteners to the specified values. Air must be bled from the fuel system after installation. Removal of the cylinder head assembly also requires draining coolant and removing the air intake components.
Komatsu sk1020 5 na skid steer loader service repair manual sna60001 and upfusjejkdkmse
This document provides specifications and dimension drawings for Komatsu SK1020-5N and SK1020-5NA skid steer loaders including:
- Dimensions for the machines and their components such as overall length, width, height, and ground clearances.
- Operating weights and bucket/fork capacities.
- Engine details including the Komatsu 4D98E-1FD diesel engine and its horsepower.
- Charts with the machines' working ranges and dimensions between components.
- Tables listing weights of machine components and specifications for fuels, coolants, and lubricants used in the machines.
Komatsu sk1020 5 n skid steer loader service repair manual sn a70001 and upfusjejkdkmse
This document provides specifications and dimension drawings for Komatsu SK1020-5N and SK1020-5NA skid steer loaders including:
- Dimensions for the machine and its components such as overall length, width, height, and ground clearances.
- Operating weight of about 3435 kg (7,573 lb) for both models.
- An SAE rated 0.47 m3 (0.61 yd3) standard bucket capacity for the SK1020-5N and pallet forks for the SK1020-5NA.
- A 52.2 kW @ 2800 rpm (60.0 kW @ 2800 rpm optional turbo) Komatsu 4D98E-1
Komatsu sk820 5 turbo skid steer loader service repair manual sn 37 btf50112 ...fusjejkdkmse
This document provides a shop manual for SK818-5 and SK820-5 skid-steer loaders. It contains sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. The structure and function section describes components of the loader including the PTO, power train, transmission, final drive, hydraulic circuits, hydraulic pumps and valves, cylinders, and electrical systems. Safety precautions are provided at the beginning.
Komatsu sk818 5 skid steer loader service repair manual sn 37 bf50111 and upfusjejkdkmse
This document provides a shop manual for SK818-5 and SK820-5 skid-steer loaders. It contains sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. The structure and function section describes components of the loader including the PTO, power train, transmission, final drive, hydraulic circuits, hydraulic pumps and valves, cylinders, and electrical systems. Diagrams are provided to illustrate the components.
This document contains sections on the structure, testing, disassembly, assembly and maintenance of SK714-5, SK815-5 and SK815-5 turbo machines. It provides safety information and precautions for working on the machines. The document contains contents pages listing the topics covered in each section, such as structure and function, testing and adjusting procedures, disassembly and assembly instructions, and maintenance standards. Standard tightening torques are also provided for bolts, nuts and other fasteners.
Komatsu sk815 5 skid steer loader service repair manual sn37 bf00006 and upfusjejkdkmse
This document contains sections on the structure, testing, disassembly, assembly and maintenance of SK714-5, SK815-5 and SK815-5 turbo machines. It provides safety instructions, tightening torque standards and guidelines for hoisting parts. The document is divided into chapters covering the main components, with sections on structure/function, testing/adjusting, disassembly/assembly and maintenance standards.
Komatsu sk714 5 skid steer loader service repair manual sn37 af00004 and upfusjejkdkmse
This document contains sections on the structure, testing, disassembly, assembly and maintenance of SK714-5, SK815-5 and SK815-5 turbo machines. It provides safety instructions, tightening torque standards and hoisting instructions. The document contains information on the contents, safety precautions, preparations for work, precautions during work, and how to read the shop manual. It is a service manual that provides technical information and instructions for working on and repairing these machine models.
Komatsu saa6 d102e 2 diesel engine service repair manualfusjejkdkmse
This shop manual provides safety precautions and maintenance techniques for Komatsu diesel engines. Proper service and repair is extremely important for safe machine operation. The manual describes servicing and repair techniques recommended by Komatsu for the current 100E-6 series and describes safety symbols used throughout. Workers should always follow the safety precautions given and take necessary actions to deal with any dangerous situations that may arise.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Mc cormick mtx tier3 restyling (2009 ) - rpd1 - 120 tractor service repair m...fusjejkdkmse
This document provides a list of components for an engine assembly. It includes the part numbers, descriptions, quantities and other relevant information for each component. Notes indicate things like serial number ranges a part is used for, whether it is a replacement part, and page references for additional details. The list contains over 100 unique components that make up the engine.
Mc cormick mc power6 tier 3 (2007 2010) - rpa1 - 135 tractor service repair m...fusjejkdkmse
This document contains parts lists and diagrams for engine components. It lists part numbers, descriptions, quantities and references other pages for an MC POWER6 Tier 3 engine from 2007-2010. Replacement part numbers are indicated along with shim sizes and other technical specifications for the various engine parts.
Mc cormick mc power6 tier 3 (2007 2010) - rpa1 - 120 tractor service repair m...fusjejkdkmse
This document contains parts lists and diagrams for engine components. It lists part numbers, descriptions, quantities and references other pages for an MC POWER6 Tier 3 engine from 2007-2010 for an RPA1 machine. Replacement part numbers are indicated. Dimensions and other specifications are provided for some components.
Mc cormick mc power4 tier 3 restyling (2009 2013) - rpb2 - 120 tractor servic...fusjejkdkmse
This document contains parts listings and component assemblies for engines. It includes listings of individual parts, part numbers, quantities and references other component assemblies. It notes that some components are not serviced and to order replacement assemblies instead, and provides engine model and manufacturer information.
Mc cormick mb series tier 2 (limited market) (2005 ) - rt61 - mb75 tractor s...fusjejkdkmse
This document provides component part information for engine repairs and replacements. It includes lists of parts with identification numbers, part names, quantities needed and other technical specifications. The parts are grouped by component assembly and include specifications like serial number ranges and replacement instructions.
Mc cormick mb series tier 2 (limited market) (2005 ) - rt61 - mb65 tractor s...fusjejkdkmse
This document contains parts listings and technical specifications for engine components. It includes items like pumps, gears, shafts, springs, valves, pistons, rods, bearings, plugs, and other engine parts. Each item lists properties like part numbers, quantity needed, replacement status, and technical details like torque specs or shim sizes. It provides the information needed to service and replace parts for this engine.
Mc cormick mb series tier 1 (limited market) (2002 2005) - rt60 - mb85 tracto...fusjejkdkmse
This document provides a list of components that make up an engine assembly. It includes over 40 individual parts, each with a reference number, description, and quantity. Additional information is provided on fit type and replacement quantities. The components are for a McCormick tractor engine from 2002-2005.
Mc cormick mb series tier 1 (limited market) (2002 2005) - rt60 - mb75 tracto...fusjejkdkmse
This document provides a list of components that make up an assembly. It includes the reference number, description, quantity and other information for each component. Some key details include:
- There are over 40 individual components listed, ranging from gears and shafts to screws, pins, and plugs.
- Additional information is provided for some components, such as replacement part numbers, fitting types (slip fit, press fit), and quantity breakdowns for different production volumes.
- Component descriptions refer to other reference numbers, indicating they are sub-assemblies or parts of other components.
- Notes provide additional instructions such as indicating some components are not serviced individually.
So in summary, this document details
Mc cormick gx series tier 3 (2004 2007) - rp81 - gx45 gxh45 tractor service ...fusjejkdkmse
This document provides parts information for engine components. It includes images and part numbers for items like pistons, rods, bearings, gaskets, bolts and other engine parts. The document references replacement part kits and notes when parts are available in oversized or undersized variants. It also provides assembly references to other documents.
Mc cormick gx series tier 1 (2002 2004) - rp80 - gx50 gxh50 tractor service ...fusjejkdkmse
This document contains parts information for components of an engine assembly, including identification numbers, part names, quantities, and other specifications. It provides replacement part numbers for overhauling or repairing engine components. Notes classify parts as standard or over/under-sized and indicate quantity breakdowns for different production volumes. The document appears to be pages from a service manual or parts catalog.
Komatsu wa250 6 wheel loader service repair manual (sn 76001 and up)fusjejkdkmse
1. The document is a shop manual that provides instructions for maintenance and repair of Komatsu WA250-6 wheel loaders.
2. It details procedures for disassembly and assembly of various components, including the engine, fuel system, and cooling system.
3. Safety precautions are outlined, such as lowering equipment, blocking wheels, disconnecting batteries, and wearing protective equipment when working on the loader.
Komatsu wa250 5 l wheel loader service repair manual sna73001 and upfusjejkdkmse
This document provides instructions for removing and installing a fuel injection pump assembly and nozzle holder assembly on a Komatsu WA250-5L/WA250PT-5L wheel loader. Key steps include disconnecting fuel lines and tubes, removing mounting nuts and brackets, using matching pins to align timing, and torquing fasteners to the specified values. Air must be bled from the fuel system after installation. Removal of the cylinder head assembly also requires draining coolant and removing the air intake components.
Komatsu sk1020 5 na skid steer loader service repair manual sna60001 and upfusjejkdkmse
This document provides specifications and dimension drawings for Komatsu SK1020-5N and SK1020-5NA skid steer loaders including:
- Dimensions for the machines and their components such as overall length, width, height, and ground clearances.
- Operating weights and bucket/fork capacities.
- Engine details including the Komatsu 4D98E-1FD diesel engine and its horsepower.
- Charts with the machines' working ranges and dimensions between components.
- Tables listing weights of machine components and specifications for fuels, coolants, and lubricants used in the machines.
Komatsu sk1020 5 n skid steer loader service repair manual sn a70001 and upfusjejkdkmse
This document provides specifications and dimension drawings for Komatsu SK1020-5N and SK1020-5NA skid steer loaders including:
- Dimensions for the machine and its components such as overall length, width, height, and ground clearances.
- Operating weight of about 3435 kg (7,573 lb) for both models.
- An SAE rated 0.47 m3 (0.61 yd3) standard bucket capacity for the SK1020-5N and pallet forks for the SK1020-5NA.
- A 52.2 kW @ 2800 rpm (60.0 kW @ 2800 rpm optional turbo) Komatsu 4D98E-1
Komatsu sk820 5 turbo skid steer loader service repair manual sn 37 btf50112 ...fusjejkdkmse
This document provides a shop manual for SK818-5 and SK820-5 skid-steer loaders. It contains sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. The structure and function section describes components of the loader including the PTO, power train, transmission, final drive, hydraulic circuits, hydraulic pumps and valves, cylinders, and electrical systems. Safety precautions are provided at the beginning.
Komatsu sk818 5 skid steer loader service repair manual sn 37 bf50111 and upfusjejkdkmse
This document provides a shop manual for SK818-5 and SK820-5 skid-steer loaders. It contains sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. The structure and function section describes components of the loader including the PTO, power train, transmission, final drive, hydraulic circuits, hydraulic pumps and valves, cylinders, and electrical systems. Diagrams are provided to illustrate the components.
This document contains sections on the structure, testing, disassembly, assembly and maintenance of SK714-5, SK815-5 and SK815-5 turbo machines. It provides safety information and precautions for working on the machines. The document contains contents pages listing the topics covered in each section, such as structure and function, testing and adjusting procedures, disassembly and assembly instructions, and maintenance standards. Standard tightening torques are also provided for bolts, nuts and other fasteners.
Komatsu sk815 5 skid steer loader service repair manual sn37 bf00006 and upfusjejkdkmse
This document contains sections on the structure, testing, disassembly, assembly and maintenance of SK714-5, SK815-5 and SK815-5 turbo machines. It provides safety instructions, tightening torque standards and guidelines for hoisting parts. The document is divided into chapters covering the main components, with sections on structure/function, testing/adjusting, disassembly/assembly and maintenance standards.
Komatsu sk714 5 skid steer loader service repair manual sn37 af00004 and upfusjejkdkmse
This document contains sections on the structure, testing, disassembly, assembly and maintenance of SK714-5, SK815-5 and SK815-5 turbo machines. It provides safety instructions, tightening torque standards and hoisting instructions. The document contains information on the contents, safety precautions, preparations for work, precautions during work, and how to read the shop manual. It is a service manual that provides technical information and instructions for working on and repairing these machine models.
Komatsu saa6 d102e 2 diesel engine service repair manualfusjejkdkmse
This shop manual provides safety precautions and maintenance techniques for Komatsu diesel engines. Proper service and repair is extremely important for safe machine operation. The manual describes servicing and repair techniques recommended by Komatsu for the current 100E-6 series and describes safety symbols used throughout. Workers should always follow the safety precautions given and take necessary actions to deal with any dangerous situations that may arise.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
3. 1
V3300-E2B, V3300-T-E2B, WSM SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
BEFORE SERVICING AND REPAIRING
• Read all instructions and safety instructions in this
manual and on your engine safety decals.
• Clean the work area and engine.
• Park the machine on a firm and level ground.
• Allow the engine to cool before proceeding.
• Stop the engine, and remove the key.
• Disconnect the battery negative cable.
• Hang a “DO NOT OPERATE” tag in operator
station.
SAFETY FIRST
This symbol, the industry’s “Safety Alert Symbol”, is used throughout this manual and on labels on
the machine itself to warn of the possibility of personal injury. Read these instructions carefully.
It is essential that you read the instructions and safety regulations before you attempt to repair or use
this unit.
DANGER : Indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING : Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION : Indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury.
■ IMPORTANT : Indicates that equipment or property damage could result if instructions are not
followed.
■ NOTE : Gives helpful information.
KiSC issued 06, 2006 A
4. 2
V3300-E2B, V3300-T-E2B, WSM SAFETY INSTRUCTIONS
SAFETY STARTING
• Do not start the engine by shorting across starter
terminals or bypassing the safety start switch.
• Unauthorized modifications to the engine may impair
the function and / or safety and affect engine life.
SAFETY WORKING
• Do not work on the machine while under the influence
of alcohol, medication, or other substances or while
fatigued.
• Wear close fitting clothing and safety equipment
appropriate to the job.
• Use tools appropriate to the work. Makeshift tools,
parts, and procedures are not recommended.
• When servicing is performed together by two or more
persons, take care to perform all work safely.
• Do not touch the rotating or hot parts while the engine
is running.
• Never remove the radiator cap while the engine is
running, or immediately after stopping. Otherwise, hot
water will spout out from radiator. Only remove
radiator cap when cool enough to touch with bare
hands. Slowly loosen the cap to first stop to relieve
pressure before removing completely.
• Escaping fluid (fuel or hydraulic oil) under pressure
can penetrate the skin causing serious injury. Relieve
pressure before disconnecting hydraulic or fuel lines.
Tighten all connections before applying pressure.
• Wear a suitable hearing protective device such as
earmuffs or earplugs to protect against objectionable
or uncomfortable loud noises.
AVOID FIRES
• Fuel is extremely flammable and explosive under
certain conditions. Do not smoke or allow flames or
sparks in your working area.
• To avoid sparks from an accidental short circuit,
always disconnect the battery negative cable first and
connect it last.
• Battery gas can explode. Keep sparks and open
flame away from the top of battery, especially when
charging the battery.
• Make sure that no fuel has been spilled on the engine.
KiSC issued 06, 2006 A
5. 3
V3300-E2B, V3300-T-E2B, WSM SAFETY INSTRUCTIONS
VENTILATE WORK AREA
• If the engine must be running to do some work, make
sure the area is well ventilated. Never run the engine
in a closed area. The exhaust gas contains poisonous
carbon monoxide.
DISPOSE OF FLUIDS PROPERLY
• Do not pour fluids into the ground, down a drain, or
into a stream, pond, or lake. Observe relevant
environmental protection regulations when disposing
of oil, fuel, coolant, electrolyte and other harmful
waste.
PREVENT ACID BURNS
• Sulfuric acid in battery electrolyte is poisonous. It is
strong enough to burn skin, clothing and cause
blindness if splashed into eyes. Keep electrolyte
away from eyes, hands and clothing. If you spill
electrolyte on yourself, flush with water, and get
medical attention immediately.
PREPARE FOR EMERGENCIES
• Keep a first aid kit and fire extinguisher handy at all
times.
• Keep emergency numbers for doctors, ambulance
service, hospital and fire department near your
telephone.
KiSC issued 06, 2006 A
6. 4
V3300-E2B, V3300-T-E2B, WSM SPECIFICATIONS
SPECIFICATIONS
* The specification described above is of the standard engine of each model.
* Conversion Formula : HP = 0.746 kW, PS = 0.7355 kW
W1028103
Model V3300-E2B V3300-T-E2B
Number of Cylinder 4
Type Vertical, water-cooled, 4-cycle diesel engine
Bore × Stroke 98 × 110 mm (3.86 × 4.33 in.)
Total Displacement 3318 cm3 (202.48 cu.in.)
ISO Net Continuous
44.1 kW / 2600 min-1
(rpm)
(59.1 HP / 2600 min-1 (rpm))
53.8 kW / 2600 min-1
(rpm)
(72.1 HP / 2600 min-1 (rpm))
ISO / SAE Net Intermittent
50.7 kW / 2600 min-1 (rpm)
(68.0 HP / 2600 min-1
(rpm))
61.9 kW / 2600 min-1 (rpm)
(83.0 HP / 2600 min-1
(rpm))
SAE Gross Intermittent
54.5 kW / 2600 min-1 (rpm)
(73.0 HP / 2600 min-1
(rpm))
65.2 kW / 2600 min-1 (rpm)
(87.4 HP / 2600 min-1
(rpm))
DIN6271-NA
44.6 kW / 2600 min-1
(rpm)
(59.8 ps / 2600 min-1
(rpm))
53.8 kW / 2600 min-1
(rpm)
(73.1 ps / 2600 min-1
(rpm))
DIN6271-NB
48.9 kW / 2600 min-1
(rpm)
(66.5 ps / 2600 min-1
(rpm))
59.7 kW / 2600 min-1
(rpm)
(81.2 ps / 2600 min-1
(rpm))
DIN70020
52.7 kW / 2600 min-1
(rpm)
(71.7 ps / 2600 min-1 (rpm))
64.4 kW / 2600 min-1
(rpm)
(87.6 ps / 2600 min-1 (rpm))
Maximum Bare Speed 2800 min-1
(rpm)
Minimum Bare Idling Speed 700 to 750 min-1
(rpm)
Combustion Chamber Spherical Type (E-TVCS)
Fuel Injection Pump Bosch Type Mini Pump
Governor All speed mechanical governor
Direction of Rotation Counter-clockwise (Viewed from flywheel side)
Injection Nozzle BOSCH Throttle-Type
Injection Timing 0.21 rad. (12 °) before T.D.C. 0.12 rad. (7 °) before T.D.C.
Firing Order 1-3-4-2
Injection Pressure 13.73 MPa (140 kgf/cm2
, 1991 psi)
Compression Ratio 22.6 21.8
Lubricating System Forced lubrication by trochoid pump
Oil Pressure Indicating Electrical Type Switch
Lubricating Filter Full Flow Paper Filter (Cartridge Type)
Cooling System Pressurized radiator, forced circulation with water pump
Starting System Electric Starting with Starter
Starting Motor 12 V, 2.5 kW
Starting Support Device By Glow Plug in Combustion Chamber
Battery 12 V, 112 AH equivalent
Charging Alternator 12 V, 540 W
Fuel Diesel Fuel No. 2-D (ASTM D975)
Lubricating Oil
Class CF lubricating oil as per API classification is recommended.
If this class of lubricating oil is not available, preferably use Class CD or CE lubricating oil.
For details on recommended lubricating oils, see page G-5, 11.
Lubricating Oil Capacity 13.2 L (3.49 U.S.gals)
Weight (Dry) 241 kg (531 lbs) 250 kg (551 lbs)
KiSC issued 06, 2006 A
10. CONTENTS
GENERAL
1. ENGINE IDENTIFICATION............................................................................. G-1
[1] MODEL NAME AND ENGINE SERIAL NUMBER ................................ G-1
[2] E2B ENGINE............................................................................................. G-1
[3] CYLINDER NUMBER ............................................................................... G-2
2. GENERAL PRECAUTIONS ............................................................................ G-3
3. MAINTENANCE CHECK LIST....................................................................... G-4
4. CHECK AND MAINTENANCE....................................................................... G-6
[1] DAILY CHECK POINTS........................................................................... G-6
[2] CHECK POINTS OF INITIAL 50 HOURS............................................. G-8
[3] CHECK POINT OF EVERY 50 HOURS ............................................... G-9
[4] CHECK POINTS OF EVERY 250 HOURS......................................... G-10
[5] CHECK POINTS OF EVERY 500 HOURS......................................... G-12
[6] CHECK POINT OF EVERY 1000 HOURS ......................................... G-15
[7] CHECK POINTS OF EVERY 1 OR 2 MONTHS............................... G-16
[8] CHECK POINTS OF EVERY 1500 HOURS....................................... G-18
[9] CHECK POINTS OF EVERY 3000 HOURS....................................... G-20
[10]CHECK POINTS OF EVERY 1 YEAR ................................................ G-23
[11]CHECK POINTS OF EVERY 2 YEARS.............................................. G-24
5. SPECIAL TOOLS.......................................................................................... G-27
KiSC issued 06, 2006 A
11. G-1
V3300-E2B, V3300-T-E2B, WSM G GENERAL
1. ENGINE IDENTIFICATION
[1] MODEL NAME AND ENGINE SERIAL NUMBER
When contacting the manufacture, always specify your engine
model name and serial number.
The engine model and its serial number need to be identified
before the engine can be serviced or parts replaced.
■ Engine Serial Number
The engine serial number is an identified number for the engine.
It is marked after the engine model number.
It indicates month and year of manufacture as follows.
• Year of manufacture
W1010477
Alphabet or
Number
Year
Alphabet or
Number
Year
1 2001 F 2015
2 2002 G 2016
3 2003 H 2017
4 2004 J 2018
5 2005 K 2019
6 2006 L 2020
7 2007 M 2021
8 2008 N 2022
9 2009 P 2023
A 2010 R 2024
B 2011 S 2025
C 2012 T 2026
D 2013 V 2027
E 2014
(1) Engine Model Name and Serial
Number
KiSC issued 06, 2006 A
12. G-2
V3300-E2B, V3300-T-E2B, WSM G GENERAL
• Month of manufacture
e.g. V3300-3A0001
“3” indicates 2003 and “A” indicates January.
So, 3A indicates that the engine was manufactured in January,
2003.
W1011076
[2] E2B ENGINE
[ex. Model Name V3300-E2B-XXXX]
The emission controls that have been put into effect in various countries to prevent air pollution will be stepped up.
The time to enforce the regulations differs depending on the engine output classifications.
Kubota has been supplying the diesel engines conforming to the emission regulations in respective countries.
Exhaust emissions regulations shift to the second stage. Kubota executed the improvement of the engine according
to this regulation.
In order to discriminate the engines conforming to Tier 1 / Phase 1 requirements and those conforming to Tier 2 /
Phase 2 requirements, we have adopted E2B as a new model name for the engines conforming Tier 2 / Phase 2
regulations.
In the after-sale services for V3300-E2B and V3300-T-E2B series engines, only use the dedicated parts for E2B
models and carry out the maintenance services accordingly.
[3] CYLINDER NUMBER
The cylinder numbers of kubota diesel engine are designated as
shown in the figure.
The sequence of cylinder numbers is given as No.1, No.2, No.3
and No.4 starting from the gear case side.
W1011077
Month
Engine Serial Number
0001 ~ 9999 10000 ~
January A0001 ~ A9999 B0001 ~
February C0001 ~ C9999 D0001 ~
March E0001 ~ E9999 F0001 ~
April G0001 ~ G9999 H0001 ~
May J0001 ~ J9999 K0001 ~
June L0001 ~ L9999 M0001 ~
July N0001 ~ N9999 P0001 ~
August Q0001 ~ Q9999 R0001 ~
September S0001 ~ S9999 T0001 ~
October U0001 ~ U9999 V0001 ~
November W0001 ~ W9999 X0001 ~
December Y0001 ~ Y9999 Z0001 ~
KiSC issued 06, 2006 A
13. G-3
V3300-E2B, V3300-T-E2B, WSM G GENERAL
2. GENERAL PRECAUTIONS
• During disassembly, carefully arrange removed parts in a clean
area to prevent confusion later. Screws, bolts and nuts should be
replaced in their original position to prevent reassembly errors.
• When special tools are required, use KUBOTA genuine special
tools. Special tools which are not frequently used should be
made according to the drawings provided.
• Before disassembling or servicing live wires, make sure to
always disconnect the grounding cable from the battery first.
• Remove oil and dirt from parts before measuring.
• Use only KUBOTA genuine parts for parts replacement to
maintain engine performance and to ensure safety.
• Gaskets and O-rings must be replaced during reassembly.
Apply grease to new O-rings or oil seals before assembling.
• When reassembling external or internal snap rings, position them
so that the sharp edge faces against the direction from which
force is applied.
• Be sure to perform run-in the serviced or reassembled engine.
Do not attempt to give heavy load at once, or serious damage
may result to the engine.
W1011734
(1) Grease
(2) Force
(3) Place the Sharp Edge against the
Direction of Force
(A) External Snap Ring
(B) Internal Snap Ring
KiSC issued 06, 2006 A
14. G-4
V3300-E2B, V3300-T-E2B, WSM G GENERAL
3. MAINTENANCE CHECK LIST
To maintain long-lasting and safe engine performance, make it a rule to carry out regular inspections by following
the table below.
* The items listed above (* marked) are registered as emission related critical parts by KUBOTA in the U.S.EPA
nonroad emission regulation.
As the engine owner, you are responsible for the performance of the required maintenance on the engine according
to the above instruction.
W1029462
Item
Service Interval
Initial
50 hrs
Every
50 hrs
Every
250
hrs
Every
500
hrs
Every
1000
hrs
Every 1
or 2
months
Every
1500
hrs
Every
3000
hrs
Every
1 year
Every
2
years
Changing engine oil ✩ ✩ ✩
Replacing oil filter cartridge ✩ ✩
*Checking fuel hoses and clamps ✩
*Cleaning air filter element
(Replace the element after 6 times cleanings)
✩
*Cleaning fuel filter ✩
Checking battery electrolyte level ✩
Checking radiator hoses and clamps ✩
*Checking intake air line ✩
Checking fan belt tension and damage ✩ ✩
*Replacing fuel filter cartridge ✩
Replacing fan belt ✩ ✩
Cleaning radiator interior ✩
Checking valve clearance ✩
Recharging battery ✩
*Checking injection nozzle condition ✩
*Checking turbocharger ✩
Checking fuel injection pump ✩
*Checking injection timing (spill timing) ✩
*Replacing air filter element ✩
Changing radiator coolant (L.L.C.) ✩
Replacing radiator hoses and clamps ✩
*Replacing fuel hoses and clamps ✩
*Replacing intake air line ✩
Replacing battery ✩
KiSC issued 06, 2006 A
15. G-5
V3300-E2B, V3300-T-E2B, WSM G GENERAL
CAUTION
• When changing or inspecting, be sure to level and stop the engine.
■ NOTE
Lubricating Oil
With the emission control now in effect, the CF-4 and CG-4 lubricating oils have been developed for use of a low-
sulfur fuel on-road vehicle engines. When an off-road vehicle engine runs on a high-sulfur fuel, it is advisable to
employ the CF, CD or CE lubricating oil with a high total base number. If the CF-4 or CG-4 lubricating oil is used with
a high-sulfur fuel, change the lubricating oil at shorter intervals.
• Lubricating oil recommended when a low-sulfur or high-sulfur fuel is employed.
❍ : Recommendable X : Not recommendable
W1035555
Fuel
Lubricating
oil class
Low sulfur
(0.5 % ≥)
High sulfur Remarks
CF ❍ ❍ TBN ≥ 10
CF-4 ❍ X
CG-4 ❍ X
KiSC issued 06, 2006 A
16. G-6
V3300-E2B, V3300-T-E2B, WSM G GENERAL
4. CHECK AND MAINTENANCE
[1] DAILY CHECK POINTS
Checking Engine Oil Level
1. Level the engine.
2. To check the oil level, draw out the dipstick (1), wipe it clean,
reinsert it, and draw it out again.
Check to see that the oil level lies between the two notches.
3. If the level is too low, add new oil to the specified level.
IMPORTANT■
• When using an oil of different maker or viscosity from the
previous one, drain old oil. Never mix two different types of
oil.
NOTE■
• Be sure to inspect the engine, locating it on a horizontal
place. If placed on gradients, accurately, oil quantity may
not be measured.
• Be sure to keep the oil level between upper and lower limits
of the dipstick. Too much oil may cause a drop in output or
excessive blow-by gas. On the closed breather type engine
in which mist is sucked through port, too much oil may
caused oil hammer. While too little oil, may seize the
engine’s rotating and sliding parts.
W1035676
(1) Dipstick (a) Maximum
(b) Minimum
KiSC issued 06, 2006 A
17. G-7
V3300-E2B, V3300-T-E2B, WSM G GENERAL
Checking and Replenish Coolant
1. Without recovery tank :
Remove the radiator cap (1) and check to see that the coolant
level is just below the port.
With recovery tank (2) :
Check to see that the coolant level lies between FULL (A) and
LOW (B).
2. If coolant level is too low, check the reason for decreasing
coolant.
(Case 1)
If coolant is decreasing by evaporation, replenish only fresh, soft
water.
(Case 2)
If coolant is decreasing by leak, replenish coolant of the same
manufacture and type in the specified mixture ratio (fresh, soft
water and L.L.C.). If the coolant brand cannot be identified, drain
out all of the remaining coolant and refill with a totally new brand
of coolant mix.
CAUTION
• Do not remove the radiator cap until coolant temperature is
below its boiling point. Then loosen the cap slightly to
relieve any excess pressure before removing the cap
completely.
IMPORTANT■
• During filling the coolant, air must be vented from the engine
coolant passages. The air vents by jiggling the radiator
upper and lower hoses.
• Be sure to close the radiator cap securely. If the cap is loose
or improperly closed, coolant may leak out and the engine
could overheat.
• Do not use an antifreeze and scale inhibitor at the same time.
• Never mix the different type or brand of L.L.C..
W1035779
(1) Radiator Cap
(2) Recovery Tank
A: FULL
B: LOW
KiSC issued 06, 2006 A
18. G-8
V3300-E2B, V3300-T-E2B, WSM G GENERAL
[2] CHECK POINTS OF INITIAL 50 HOURS
Changing Engine Oil
CAUTION
• Be sure to stop engine before changing engine oil.
1. Start and warm up the engine for approx. 5 minutes.
2. Place an oil pan underneath the engine.
3. To drain the used oil, remove the drain plug (1) at the bottom of
the engine and drain the oil completely.
4. Screw the drain plug (1).
5. Fill new oil up to upper line on the dipstick (2).
IMPORTANT■
• When using an oil of different maker or viscosity from the
previous one, remove all of the old oil.
• Never mix two different types of oil.
• Engine oil should have properties of API classification CD/
CE/CF/CF-4/CG-4.
• Use the proper SAE Engine Oil according to ambient
temperature.
W1016604
Replacing Oil Filter Cartridge
CAUTION
• Be sure to stop the engine before changing filter cartridge.
1. Remove the oil filter cartridge (1) with the filter wrench.
2. Apply a slight coat of oil onto the new cartridge gasket.
3. To install the new cartridge, screw it in by hand. Over tightening
may cause deformation of rubber gasket.
4. After the new cartridge has been replaced, the engine oil
normally decrease a little. Thus see that the engine oil does not
leak through the seal and be sure to read the oil level on the
dipstick. Then, replenish the engine oil up to the specified level.
IMPORTANT■
• To prevent serious damage to the engine, replacement
element must be highly efficient. Use only a KUBOTA
genuine filter or its equivalent.
W1017137
Above 25 °C (77 °F)
SAE 30 or SAE 10W-30
SAE 10W-40
0 °C to 25 °C (32 °F to 77 °F)
SAE 20 or SAE 10W-30
SAE 10W-40
Below 0 °C (32 °F)
SAE 10W or SAE 10W-30
SAE 10W-40
Engine oil capacity
13.2 L
3.49 U.S.gals
(1) Drain Plug (2) Dipstick
(1) Engine Oil Filter Cartridge
KiSC issued 06, 2006 A
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. G-9
V3300-E2B, V3300-T-E2B, WSM G GENERAL
Fan Belt Tension
1. Measure the deflection (A), depressing the belt halfway between
the fan drive pulley and alternator pulley at specified force 98 N
(10 kgf, 22 lbs).
2. If the measurement is not within the factory specifications, loosen
the alternator mounting screws and relocate the alternator to
adjust.
W1208957
[3] CHECK POINT OF EVERY 50 HOURS
Checking Fuel Hose and Clamp Bands
1. If the clamp (2) is loose, apply oil to the threads and securely
retighten it.
2. The fuel hose (3) is made of rubber and ages regardless of the
period service.
Change the fuel pipe together with the clamp every two years.
3. However, if the fuel hose and clamps are found to be damaged
or deteriorate earlier than two years, then change or remedy.
4. After the fuel hose and the clamps have been changed, bleed the
fuel system.
CAUTION
• Stop the engine when attempting the check and change
prescribed above.
(When bleeding fuel system)
1. Fill the tank with fuel and open the cock.
2. Loosen the air vent coupling bolt of fuel filter a few turns.
3. When there is no more air bubbles in the fuel coming out of this
coupling bolt, tighten the coupling bolt.
4. Open the air vent cock (1) on the top of fuel injection pump.
5. If equipped electrical fuel feed pump, turn the key on AC position
and pump the fuel up for 10 to 15 seconds.
If equipped mechanical fuel feed pump, set the stop lever on stop
position and crank the engine for 10 to 15 seconds.
6. Close securely the air vent cock (1) after air bleeding.
IMPORTANT■
• Except when venting the air, be sure to keep closed the air
vent coupling bolt of the fuel injection pump. Otherwise, the
engine may stall.
W1035921
Deflection (A) Factory spec.
10 to 12 mm
0.394 to 0.472 in.
(A) Deflection
(1) Air Vent Cock
(2) Clamp
(3) Fuel Hose
KiSC issued 06, 2006 A
21. G-10
V3300-E2B, V3300-T-E2B, WSM G GENERAL
[4] CHECK POINTS OF EVERY 250 HOURS
Fan Belt Tension
1. Measure the deflection (A), depressing the belt halfway between
the fan drive pulley and alternator pulley at specified force 98 N
(10 kgf, 22 lbs).
2. If the measurement is not within the factory specifications, loosen
the alternator mounting screws and relocate the alternator to
adjust.
W1014131
Fan Belt Damage and Wear
1. Check the fan belt for damage.
2. If the fan belt is damaged, replace it.
3. Check if the fan belt is worn and sunk in the pulley groove.
4. If the fan belt is nearly worn out and deeply sunk in the pulley
groove, replace it.
W1209480
Cleaning Air Cleaner Element
1. Remove the air cleaner element.
2. Use clean dry compressed air on the inside of the element.
Pressure of compressed air must be under 205 kPa (2.1 kgf/cm2
,
30 psi).
Maintain reasonable distance between the nozzle and the filter.
NOTE■
• The air cleaner uses a dry element. Never apply oil to it.
• Do not run the engine with filter element removed.
• Change the element once a year or every 6th cleaning.
W1045746
Deflection (A) Factory spec.
10 to 12 mm
0.394 to 0.472 in.
(A) Deflection
(A) Good (B) Bad
KiSC issued 06, 2006 A
22. G-11
V3300-E2B, V3300-T-E2B, WSM G GENERAL
Cleaning Fuel Filter (Element Type only)
1. Close the fuel cock (3).
2. Unscrew the retaining ring (6) and remove the filter cup (5), and
rinse the inside with kerosene.
3. Take out the element (4) and dip it in the kerosene to rinse.
4. After cleaning, reassemble the fuel filter, keeping out dust and
dirt.
5. Bleed the fuel system.
IMPORTANT■
• If dust and dirt enter the fuel, the fuel injection pump and
injection nozzle will wear quickly. To prevent this, be sure
to clean the filter cup (5) periodically.
W1046058
Changing Engine Oil
CAUTION
• Be sure to stop engine before changing engine oil.
1. Start and warm up the engine for approx. 5 minutes.
2. Place an oil pan underneath the engine.
3. To drain the used oil, remove the drain plug (1) at the bottom of
the engine and drain the oil completely.
4. Screw the drain plug (1).
5. Fill new oil up to upper line on the dipstick (2).
IMPORTANT■
• When using an oil of different maker or viscosity from the
previous one, remove all of the old oil.
• Never mix two different types of oil.
• Engine oil should have properties of API classification CD/
CE/CF/CF-4/CG-4.
• Use the proper SAE Engine Oil according to ambient
temperature.
W1014590
Checking Radiator Hoses and Clamp Bands
1. Check to see if the radiator hoses are properly fixed every 250
hours of operation or every six months, whichever comes first.
2. If the clamp is loose, apply oil to the threads and retighten it
securely.
3. The water hose is made of rubber and tends to age. It must be
replaced every two years. Also replace the clamp and tighten it
securely.
W1029518
(1) Cock Body
(2) Air Vent Plug
(3) Fuel Cock
(4) Filter Element
(5) Filter Cup
(6) Retaining Ring
Above 25 °C (77 °F)
SAE 30 or SAE 10W-30
SAE 10W-40
0 °C to 25 °C (32 °F to 77 °F)
SAE 20 or SAE 10W-30
SAE 10W-40
Below 0 °C (32 °F)
SAE 10W or SAE 10W-30
SAE 10W-40
Engine oil capacity
13.2 L
3.49 U.S.gals
(1) Drain Plug (2) Dipstick
(1) Upper Hose (2) Lower Hose
KiSC issued 06, 2006 A