This workshop manual provides instructions for maintenance and repair of tractors models L3130, L3430, L3830, L4630, and L5030. It contains contents, lubrication specifications, maintenance schedules, special tool lists, and other technical information. The manual instructs technicians to arrange removed parts carefully, use genuine Kubota tools when possible, and replace all gaskets and seals during reassembly. It also provides tightening torque specifications for general use screws, bolts and nuts.
Kubota rtv1100 utility vehicle utv service repair manualfujjsefkksemmm
This document provides a workshop manual for a utility vehicle. It includes sections on general precautions for handling electrical parts, wiring, batteries, fuses, and connectors. It also lists lubricants, fuels, and coolants required for the vehicle, including using No. 2-D fuel in the 30L fuel tank. Maintenance checklists are provided from the initial 50 hours of operation to every 4 years, outlining inspection and maintenance tasks. The document also lists special tools required for engine and vehicle components and provides specifications for tires, including tire pressure and vehicle load limits.
Kubota st alpha-30 tractor service repair manualdfjjsekksekmsw
This document provides maintenance information for tractors. It includes:
1. Features of the tractor models and identification information.
2. General precautions for maintenance and handling electrical parts, including proper wiring techniques.
3. Specifications for lubricants, fuel, coolant and grease types and capacities.
4. Tightening torque specifications for general screws, bolts and stud bolts.
5. Check and maintenance schedules, listing inspection items to check daily, every 50 hours, 100 hours, and other intervals.
Kubota st alpha-35 tractor service repair manualfujjsekfkksekm
This document provides maintenance information for STα-30 and STα-35 tractors. It discusses general precautions for handling electrical parts and wiring, recommended lubricants and fluids, and maintenance check points to perform every 50, 100, 200, 400 hours or yearly/2-yearly. Precautions are given for safe handling of batteries, fuses, connectors and circuit testers. Wiring should be securely clamped without damage and terminals properly protected. Only specified lubricants and fuels should be used in the tractor systems.
Kubota b1830 tractor service repair manualfhhsjdkmem
This document provides a workshop manual for tractors. It includes sections on:
- Tractor identification
- General precautions for handling electrical parts, wiring, batteries, fuses, and connectors
- Recommended lubricants, fuels, and coolants for various components
- Tightening torques for general screws/bolts and stud bolts
- Maintenance checklists and schedules for daily, 50-hour, 100-hour, etc. checks
- Lists of special tools needed for engine, tractor, and cabin components
- Tire pressure specifications and tread wear limits
- Implement weight and size limitations
Kubota gr1600 ec2 ride on mower service repair manualfujsjefkskemm
This document provides guidelines on maintenance procedures for electrical parts and wiring, lubricants, fuel, coolant, and tightening torques for a machine workshop manual. It includes:
1. Precautions for handling electrical parts like ensuring wiring is securely clamped and terminals are protected from damage.
2. Details on battery maintenance such as checking polarity and applying grease to terminals.
3. Tables listing lubricant types and capacities for parts like the engine, transmission, and mower gear box.
4. Tables specifying tightening torque ranges for metric screws, bolts and nuts made of different materials.
Kubota front loader service repair manualjjskefkskemik
This document provides a workshop manual for tractors, rotary mowers, and front loaders. It contains sections on identification, precautions, lubricants, tightening torques, maintenance checklists, special tools, tires, and implement limitations. The precautions section emphasizes safely handling electrical parts and wiring, including disconnecting negative battery terminals first, securely clamping wiring, avoiding damage, and checking for loose connections annually.
Kubota rck54 23 bx-eu tractor service repair manualfjjksekfksmem
This document provides a workshop manual for tractors, rotary mowers, and front loaders. It contains sections on identification, precautions, lubricants, tightening torques, maintenance checklists, special tools, tires, and implement limitations. The precautions section emphasizes safely handling electrical parts and wiring, including disconnecting negative battery terminals first, securely clamping wiring, avoiding damage, and checking for loose connections annually.
Kubota rotary mower service repair manualfjskeksemm
This document provides a workshop manual for tractors, rotary mowers, and front loaders. It contains sections on identification, precautions, lubricants, tightening torques, maintenance checklists, special tools, tires, and implement limitations. The precautions section emphasizes safely handling electrical parts and wiring, including disconnecting negative battery terminals first, securely clamping wiring, avoiding damage, and checking for loose connections annually.
Kubota rtv1100 utility vehicle utv service repair manualfujjsefkksemmm
This document provides a workshop manual for a utility vehicle. It includes sections on general precautions for handling electrical parts, wiring, batteries, fuses, and connectors. It also lists lubricants, fuels, and coolants required for the vehicle, including using No. 2-D fuel in the 30L fuel tank. Maintenance checklists are provided from the initial 50 hours of operation to every 4 years, outlining inspection and maintenance tasks. The document also lists special tools required for engine and vehicle components and provides specifications for tires, including tire pressure and vehicle load limits.
Kubota st alpha-30 tractor service repair manualdfjjsekksekmsw
This document provides maintenance information for tractors. It includes:
1. Features of the tractor models and identification information.
2. General precautions for maintenance and handling electrical parts, including proper wiring techniques.
3. Specifications for lubricants, fuel, coolant and grease types and capacities.
4. Tightening torque specifications for general screws, bolts and stud bolts.
5. Check and maintenance schedules, listing inspection items to check daily, every 50 hours, 100 hours, and other intervals.
Kubota st alpha-35 tractor service repair manualfujjsekfkksekm
This document provides maintenance information for STα-30 and STα-35 tractors. It discusses general precautions for handling electrical parts and wiring, recommended lubricants and fluids, and maintenance check points to perform every 50, 100, 200, 400 hours or yearly/2-yearly. Precautions are given for safe handling of batteries, fuses, connectors and circuit testers. Wiring should be securely clamped without damage and terminals properly protected. Only specified lubricants and fuels should be used in the tractor systems.
Kubota b1830 tractor service repair manualfhhsjdkmem
This document provides a workshop manual for tractors. It includes sections on:
- Tractor identification
- General precautions for handling electrical parts, wiring, batteries, fuses, and connectors
- Recommended lubricants, fuels, and coolants for various components
- Tightening torques for general screws/bolts and stud bolts
- Maintenance checklists and schedules for daily, 50-hour, 100-hour, etc. checks
- Lists of special tools needed for engine, tractor, and cabin components
- Tire pressure specifications and tread wear limits
- Implement weight and size limitations
Kubota gr1600 ec2 ride on mower service repair manualfujsjefkskemm
This document provides guidelines on maintenance procedures for electrical parts and wiring, lubricants, fuel, coolant, and tightening torques for a machine workshop manual. It includes:
1. Precautions for handling electrical parts like ensuring wiring is securely clamped and terminals are protected from damage.
2. Details on battery maintenance such as checking polarity and applying grease to terminals.
3. Tables listing lubricant types and capacities for parts like the engine, transmission, and mower gear box.
4. Tables specifying tightening torque ranges for metric screws, bolts and nuts made of different materials.
Kubota front loader service repair manualjjskefkskemik
This document provides a workshop manual for tractors, rotary mowers, and front loaders. It contains sections on identification, precautions, lubricants, tightening torques, maintenance checklists, special tools, tires, and implement limitations. The precautions section emphasizes safely handling electrical parts and wiring, including disconnecting negative battery terminals first, securely clamping wiring, avoiding damage, and checking for loose connections annually.
Kubota rck54 23 bx-eu tractor service repair manualfjjksekfksmem
This document provides a workshop manual for tractors, rotary mowers, and front loaders. It contains sections on identification, precautions, lubricants, tightening torques, maintenance checklists, special tools, tires, and implement limitations. The precautions section emphasizes safely handling electrical parts and wiring, including disconnecting negative battery terminals first, securely clamping wiring, avoiding damage, and checking for loose connections annually.
Kubota rotary mower service repair manualfjskeksemm
This document provides a workshop manual for tractors, rotary mowers, and front loaders. It contains sections on identification, precautions, lubricants, tightening torques, maintenance checklists, special tools, tires, and implement limitations. The precautions section emphasizes safely handling electrical parts and wiring, including disconnecting negative battery terminals first, securely clamping wiring, avoiding damage, and checking for loose connections annually.
Kubota rck48 23 bx-eu tractor service repair manualfjjskekmsemm
This document provides guidelines and specifications for maintenance and repair of tractors and implements. It includes:
1. Identification of tractor models and components covered
2. General precautions for disassembly, handling electrical parts, and reassembly
3. Lubricant, fuel, and coolant specifications
4. Tightening torque specifications for general screws, bolts, and stud bolts
5. Maintenance checklists and schedules outlining inspection points at varying hour intervals
Kubota la243 tractor service repair manualfjskefkemms
This document provides a workshop manual for tractors, rotary mowers, and front loaders. It contains sections on identification, precautions, lubricants, tightening torques, maintenance checklists, special tools, tires, and implement limitations. The precautions section emphasizes safely handling electrical parts and wiring, including disconnecting negative battery terminals first, securely clamping wiring, avoiding damage, and checking for loose connections annually.
Kubota rck60 b 23bx-eu tractor service repair manualfjsefksemmm
This document provides a workshop manual for tractors, rotary mowers, and front loaders. It contains sections on identification, precautions, lubricants, tightening torques, maintenance checklists, special tools, tires, and implement limitations. The precautions section emphasizes safely handling electrical parts and wiring, including disconnecting negative battery terminals first, securely clamping wiring, avoiding damage, and checking for loose connections annually.
Kubota gzd15 ld zero turn mower service repair manualdfjjsekksekmsw
This document provides guidelines and specifications for maintenance and servicing of a Kubota GZD15 machine. It includes the following sections:
1. Identification information for the machine and engine.
2. General precautions for disassembly, reassembly, and handling electrical and hydraulic parts.
3. Tightening torque specifications for various screws, bolts and nuts.
4. Lubrication specifications including oil, grease and fluid types and capacities.
5. Maintenance schedules and checklists for daily, 50 hour, 100 hour and longer interval inspections as well as special service tools.
This document provides safety and service information for compact component systems. It contains 5 sections:
1) Safety precautions for the laser products and preventing static electricity damage.
2) Instructions for disassembly, adjustment, and descriptions of major integrated circuits.
3) Details on maintenance and replacement of the laser pickup, and flow of functional operations.
4) Cautions and testing procedures to ensure safety and isolate exposed metal parts when reassembled.
5) Warnings and positions of labels regarding invisible laser radiation.
Kubota gr2100 ec lawnmower service repair manualfujsjefkskemm
This document provides guidelines and specifications for maintenance and repair of a GR2100EC workshop manual. It outlines general precautions for electrical parts, wiring, batteries, fuses, connectors and circuit testing. It also specifies lubricants, fuel, coolant and tightening torques. Maintenance checklists are provided for daily, 50 hour, 100 hour, 150 hour, 200 hour, 400 hour, yearly and 2 yearly checks. Special tools required for the engine and tractor are also listed. Tire pressure specifications and tread checks are covered as well.
This document is a service manual for the Victor Company of Japan's AX-V8000 audio/video control amplifier. It provides instructions on disassembling various components of the amplifier for repair purposes. Sections include removing covers, panels, and boards, disconnecting wiring connectors, and cautionary notes regarding safety-critical components. Detailed steps and diagrams are given to guide the disassembly process.
This document discusses industrial encoders and tachometers from Nidec Avtron Automation for providing feedback and instrumentation in drive systems and machine control. It provides an overview of encoder selection factors like mounting style and durability ratings. It also summarizes the different encoder technologies available, including optical and magnetic sensing, as well as incremental and absolute encoding. Application examples and product specifications are given for a range of encoder models suited to different industrial environments and hazardous duty applications.
worm gear screw jack for canal gate, motorized screw jack hoisting sluice gates, gates with screw hoists, sluice gate screw jack motor operated features:
Important Components:
1. Heavy duty and self lock screw jack. Special requirements stainless steel jack
2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism.
3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover.
4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke.
Other Features:
1. Inverted type installation, tension load.
2. Translating screw with female thread cylinder rod clevis end.
3. Low speed gear ratio screw jack with gear reduction mechanism geared motor.
4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length.
5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements.
6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force.
7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed.
Customers Used Screw Jacks Models:
1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
John deere f935 front mower service repair manualfjjskdmnenemm
This technical manual provides service information for John Deere F911, F915, F925, F932, and F935 front mowers. The manual contains sections on engine repair, fuel and air repair, electrical repair, power train repair, steering and brake repair, hydraulic repair, and miscellaneous repair. It includes specifications, component locations, operation theory, diagnostics, testing and adjustment procedures. The manual is intended to be used by experienced technicians and contains important safety information that should be followed.
John deere f932 front mower service repair manualfjjskdmnenemm
This technical manual provides service information for John Deere F911, F915, F925, F932, and F935 front mowers. The manual contains sections on engine repair, fuel and air repair, electrical repair, power train repair, steering and brake repair, hydraulic repair, and miscellaneous repair. It includes specifications, component locations, operation theory, diagnostics, testing and adjustment procedures. The manual is intended to be used by experienced technicians and contains important safety information that should be followed.
Hyundai 25 df forklift truck service repair manualfjjskdmnenemm
The document describes the structure and operation of the power train system of an industrial vehicle, including:
1. The main components of the power train system including the engine, transmission, drive shaft, drive axle, and brakes.
2. The transmission uses a torque converter and includes a forward clutch, reverse clutch, and output gear to transfer power from the input shaft to the output shaft in forward and reverse modes.
3. Oil is pumped through the system by a gear pump and controlled by a main relief valve and solenoid valve to engage the appropriate clutch for direction of travel.
John deere f925 front mower service repair manualfjjskdmnenemm
This technical manual provides service information for John Deere F911, F915, F925, F932, and F935 front mowers. It contains sections on engine repair, fuel and air repair, electrical repair, power train repair, steering and brake repair, hydraulic repair, and miscellaneous repair. The manual begins with introductory sections on safety, specifications, fuels and lubricants, serial number locations, and standard and optional features. Repair and diagnostic information is organized by component groups.
John deere f915 front mower service repair manualfjjskdmnenemm
This technical manual provides service information for John Deere F911, F915, F925, F932, and F935 front mowers. The manual contains sections on engine repair, fuel and air repair, electrical repair, power train repair, steering and brake repair, hydraulic repair, and miscellaneous repair. It includes specifications, component locations, theory of operation, diagnosis procedures, and repair instructions. Technicians should follow all safety instructions when working on the mowers.
John deere f911 front mower service repair manualfjjskdmnenemm
This technical manual provides service information for John Deere F911, F915, F925, F932, and F935 front mowers. The manual contains sections on engine repair, fuel and air repair, electrical repair, power train repair, steering and brake repair, hydraulic repair, and miscellaneous repair. It includes specifications, component locations, theory of operation, diagnosis procedures, and repair instructions. Technicians should follow all safety instructions when working on the mowers.
John deere f735 front mower service repair manualfjjskdmnenemm
This technical manual provides specifications and safety information for servicing a John Deere F735 front mower. It includes specifications for the vehicle, fasteners, fluids, lubricants, and safety practices. Safety practices emphasize preventing injury from high pressure lines, rotating parts, batteries, and ensuring proper ventilation and protective equipment are used.
John deere 4000 series compact utility tractor attachments service repair manualfjjskdmnenemm
This technical manual provides specifications and information for attachments used with John Deere 4000 series compact utility tractors. It includes specifications for backhoes, rotary mowers, rotary tillers, a post hole digger, front blades, rotary brooms, snowblowers, and other miscellaneous attachments. The manual is intended for experienced technicians and contains sections on specifications, component location, theory of operation, troubleshooting, testing and repair for the various systems.
Kubota rck48 23 bx-eu tractor service repair manualfjjskekmsemm
This document provides guidelines and specifications for maintenance and repair of tractors and implements. It includes:
1. Identification of tractor models and components covered
2. General precautions for disassembly, handling electrical parts, and reassembly
3. Lubricant, fuel, and coolant specifications
4. Tightening torque specifications for general screws, bolts, and stud bolts
5. Maintenance checklists and schedules outlining inspection points at varying hour intervals
Kubota la243 tractor service repair manualfjskefkemms
This document provides a workshop manual for tractors, rotary mowers, and front loaders. It contains sections on identification, precautions, lubricants, tightening torques, maintenance checklists, special tools, tires, and implement limitations. The precautions section emphasizes safely handling electrical parts and wiring, including disconnecting negative battery terminals first, securely clamping wiring, avoiding damage, and checking for loose connections annually.
Kubota rck60 b 23bx-eu tractor service repair manualfjsefksemmm
This document provides a workshop manual for tractors, rotary mowers, and front loaders. It contains sections on identification, precautions, lubricants, tightening torques, maintenance checklists, special tools, tires, and implement limitations. The precautions section emphasizes safely handling electrical parts and wiring, including disconnecting negative battery terminals first, securely clamping wiring, avoiding damage, and checking for loose connections annually.
Kubota gzd15 ld zero turn mower service repair manualdfjjsekksekmsw
This document provides guidelines and specifications for maintenance and servicing of a Kubota GZD15 machine. It includes the following sections:
1. Identification information for the machine and engine.
2. General precautions for disassembly, reassembly, and handling electrical and hydraulic parts.
3. Tightening torque specifications for various screws, bolts and nuts.
4. Lubrication specifications including oil, grease and fluid types and capacities.
5. Maintenance schedules and checklists for daily, 50 hour, 100 hour and longer interval inspections as well as special service tools.
This document provides safety and service information for compact component systems. It contains 5 sections:
1) Safety precautions for the laser products and preventing static electricity damage.
2) Instructions for disassembly, adjustment, and descriptions of major integrated circuits.
3) Details on maintenance and replacement of the laser pickup, and flow of functional operations.
4) Cautions and testing procedures to ensure safety and isolate exposed metal parts when reassembled.
5) Warnings and positions of labels regarding invisible laser radiation.
Kubota gr2100 ec lawnmower service repair manualfujsjefkskemm
This document provides guidelines and specifications for maintenance and repair of a GR2100EC workshop manual. It outlines general precautions for electrical parts, wiring, batteries, fuses, connectors and circuit testing. It also specifies lubricants, fuel, coolant and tightening torques. Maintenance checklists are provided for daily, 50 hour, 100 hour, 150 hour, 200 hour, 400 hour, yearly and 2 yearly checks. Special tools required for the engine and tractor are also listed. Tire pressure specifications and tread checks are covered as well.
This document is a service manual for the Victor Company of Japan's AX-V8000 audio/video control amplifier. It provides instructions on disassembling various components of the amplifier for repair purposes. Sections include removing covers, panels, and boards, disconnecting wiring connectors, and cautionary notes regarding safety-critical components. Detailed steps and diagrams are given to guide the disassembly process.
This document discusses industrial encoders and tachometers from Nidec Avtron Automation for providing feedback and instrumentation in drive systems and machine control. It provides an overview of encoder selection factors like mounting style and durability ratings. It also summarizes the different encoder technologies available, including optical and magnetic sensing, as well as incremental and absolute encoding. Application examples and product specifications are given for a range of encoder models suited to different industrial environments and hazardous duty applications.
worm gear screw jack for canal gate, motorized screw jack hoisting sluice gates, gates with screw hoists, sluice gate screw jack motor operated features:
Important Components:
1. Heavy duty and self lock screw jack. Special requirements stainless steel jack
2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism.
3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover.
4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke.
Other Features:
1. Inverted type installation, tension load.
2. Translating screw with female thread cylinder rod clevis end.
3. Low speed gear ratio screw jack with gear reduction mechanism geared motor.
4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length.
5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements.
6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force.
7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed.
Customers Used Screw Jacks Models:
1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.
John deere f935 front mower service repair manualfjjskdmnenemm
This technical manual provides service information for John Deere F911, F915, F925, F932, and F935 front mowers. The manual contains sections on engine repair, fuel and air repair, electrical repair, power train repair, steering and brake repair, hydraulic repair, and miscellaneous repair. It includes specifications, component locations, operation theory, diagnostics, testing and adjustment procedures. The manual is intended to be used by experienced technicians and contains important safety information that should be followed.
John deere f932 front mower service repair manualfjjskdmnenemm
This technical manual provides service information for John Deere F911, F915, F925, F932, and F935 front mowers. The manual contains sections on engine repair, fuel and air repair, electrical repair, power train repair, steering and brake repair, hydraulic repair, and miscellaneous repair. It includes specifications, component locations, operation theory, diagnostics, testing and adjustment procedures. The manual is intended to be used by experienced technicians and contains important safety information that should be followed.
Hyundai 25 df forklift truck service repair manualfjjskdmnenemm
The document describes the structure and operation of the power train system of an industrial vehicle, including:
1. The main components of the power train system including the engine, transmission, drive shaft, drive axle, and brakes.
2. The transmission uses a torque converter and includes a forward clutch, reverse clutch, and output gear to transfer power from the input shaft to the output shaft in forward and reverse modes.
3. Oil is pumped through the system by a gear pump and controlled by a main relief valve and solenoid valve to engage the appropriate clutch for direction of travel.
John deere f925 front mower service repair manualfjjskdmnenemm
This technical manual provides service information for John Deere F911, F915, F925, F932, and F935 front mowers. It contains sections on engine repair, fuel and air repair, electrical repair, power train repair, steering and brake repair, hydraulic repair, and miscellaneous repair. The manual begins with introductory sections on safety, specifications, fuels and lubricants, serial number locations, and standard and optional features. Repair and diagnostic information is organized by component groups.
John deere f915 front mower service repair manualfjjskdmnenemm
This technical manual provides service information for John Deere F911, F915, F925, F932, and F935 front mowers. The manual contains sections on engine repair, fuel and air repair, electrical repair, power train repair, steering and brake repair, hydraulic repair, and miscellaneous repair. It includes specifications, component locations, theory of operation, diagnosis procedures, and repair instructions. Technicians should follow all safety instructions when working on the mowers.
John deere f911 front mower service repair manualfjjskdmnenemm
This technical manual provides service information for John Deere F911, F915, F925, F932, and F935 front mowers. The manual contains sections on engine repair, fuel and air repair, electrical repair, power train repair, steering and brake repair, hydraulic repair, and miscellaneous repair. It includes specifications, component locations, theory of operation, diagnosis procedures, and repair instructions. Technicians should follow all safety instructions when working on the mowers.
John deere f735 front mower service repair manualfjjskdmnenemm
This technical manual provides specifications and safety information for servicing a John Deere F735 front mower. It includes specifications for the vehicle, fasteners, fluids, lubricants, and safety practices. Safety practices emphasize preventing injury from high pressure lines, rotating parts, batteries, and ensuring proper ventilation and protective equipment are used.
John deere 4000 series compact utility tractor attachments service repair manualfjjskdmnenemm
This technical manual provides specifications and information for attachments used with John Deere 4000 series compact utility tractors. It includes specifications for backhoes, rotary mowers, rotary tillers, a post hole digger, front blades, rotary brooms, snowblowers, and other miscellaneous attachments. The manual is intended for experienced technicians and contains sections on specifications, component location, theory of operation, troubleshooting, testing and repair for the various systems.
Hyundai 30 bha 7 forklift truck service repair manualfjjskdmnenemm
This document provides an overview and outline of the contents of a service manual for a machine. It is divided into 8 sections that cover general information, removal/installation procedures, power train, brake, steering, hydraulic, electrical, and mast systems. The foreword explains the purpose and structure of the manual to aid technicians in performing repairs correctly. Conversion tables are also included to enable simple conversions between different units of measurement.
Hyundai 30 bh 9 forklift truck service repair manualfjjskdmnenemm
This document provides instructions for disassembling and assembling a steering unit. The major steps include:
1) Disassembling the steering unit by removing components like the end cover, gearwheel set, cardan shaft, distributor plate, check valve parts, sleeve, spool, and pressure relief valve parts.
2) Assembling the spool and sleeve with neutral position springs installed in slots. Bearing races and seals are also installed.
3) Lubricating O-rings and seals before installing them using assembly tools to properly position the components.
4) Reassembling the steering unit by installing the spool set, distributor plate, and other components removed during dis
Hyundai 25 d 7e forklift truck service repair manualfjjskdmnenemm
This document provides instructions for disassembling and assembling a steering unit. The disassembly process involves removing components like the end cover, gearwheel set, cardan shaft, distributor plate, spool, sleeve and seals. The pressure relief valve is also disassembled by removing the plug, seal washers, setting screw, spring and piston. The assembly process describes fitting components like the spool, sleeve, springs, seals and O-rings back into the steering unit housing using various tools. Proper positioning and lubrication of parts is emphasized.
Hyundai 25 bha 7 forklift truck service repair manualfjjskdmnenemm
This document provides an overview and outline of the contents of a service manual for a machine. It is divided into 8 sections that cover general information, removal/installation procedures, power train, brake, steering, hydraulic, electrical, and mast systems. The foreword explains the purpose and structure of the manual to aid technicians in performing repairs correctly. Conversion tables are also included to enable simple conversions between different units of measurement.
Hyundai 25 bh 9 forklift truck service repair manualfjjskdmnenemm
This document provides instructions for disassembling and assembling a steering unit. The major steps include:
1) Disassembling the steering unit by removing components like the end cover, gearwheel set, cardan shaft, distributor plate, check valve parts, sleeve, spool, and pressure relief valve parts.
2) Assembling the spool and sleeve with neutral position springs installed in slots. Bearing races and seals are also installed.
3) Lubricating O-rings and seals before installing them using special tools to push them into place in the housing.
4) Proper alignment of parts and torque specifications are noted to ensure correct assembly.
Hyundai 22 bha 7 forklift truck service repair manualfjjskdmnenemm
This document provides an overview and outline of the sections contained in a service manual for a machine. It includes 8 main sections that cover: general information; removal and installation of components; powertrain, brake, steering, hydraulic, electrical, and mast systems. Each section includes groups that provide structure and function, operational checks, troubleshooting, and disassembly/assembly information. Conversion tables are also included to enable simple conversions between units of measurement.
Hyundai 22 bh 9 forklift truck service repair manualfjjskdmnenemm
This document provides instructions for disassembling and assembling a steering unit. The major steps include:
1) Disassembling the steering unit by removing components like the end cover, gearwheel set, cardan shaft, distributor plate, check valve parts, sleeve, spool, and pressure relief valve parts.
2) Assembling the spool and sleeve with neutral position springs installed in slots. Bearing races and seals are fitted onto the spool/sleeve assembly.
3) O-rings and seals are installed using special tools, with lubrication and proper positioning emphasized.
4) Completed subassemblies are installed back into the steering unit housing in reverse order of
Automotive Engine Valve Manufacturing Plant Project Report.pptxSmith Anderson
The report provides a complete roadmap for setting up an Automotive Engine Valve. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
Kalyan chart DP boss guessing matka results➑➌➋➑➒➎➑➑➊➍
8328958814Satta Matka is a number-based game. There are several markets, each with its owner responsible for releasing the lottery satta Matka market results on time. Kalyan market, Worli market, main Mumbai market, Rajdhani market, and Milan market are some of the main markets or bazaars involved in the satta Matka game. The oldest and most legitimate markets are in Kalyan and Main Mumbai. Every Satta Market has an open and close time. The satta results for these markets are published on or shortly after the open and close times. During the open result, two numbers are decoded, one of which is a three-digit number and the other a single-digit number. Similarly, three-digit and single-digit numbers are declared during the satta market's close. The last digit after adding the three digits of the open or close result is usually the single digit declared during the open and close results.KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAINSATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSdp boss net, dp satta, dpboss dpboss, indian satta matka, kalyan matkà result today , matka boss, matka result live, matka satta result today, satamatka com, satta boss, satta matka king, sattamatkà, sattamatkà result, sattamatta com, sattmatka sattmatka, star matka, tara matka, tara satta matka, worli matka, indian matka, matka live, kalyan guessing, satta fix, kalyan final ank, dp matka, dpboss net, sata mata com, सट्टा मटका, sattamatkà 143, golden matka, satta matta matka 143, satta fast, kalyan open, satta 143, dpboss 143 guessing, dpboss satta, golden satta matka, satta bajar
Satta Matka Market is India's leading website providing the quickest sattamatka outcome, experienced in Satta Matka game. Our services include free Satta Matka Trick and Tips for Kalyan Matka and Disawar Satta King, as well as satta matka graphs, online play, tips and more. Our team of experts strive to help you recoup your losses quickly through our proposals such as Free Satta Matka Tips and Kalyan Bazar Tips. We are known as India's best Matka DpBoss portal site, here to deliver updates on all sorts of Satta Market like Kalyan Bazar, Milan, Rajdhani, Time Bazaar, Main and the most current charts. Stay tuned with us for more live updates on the Satta market
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
2. CONTENTS
GENERAL
1. TRACTOR IDENTIFICATION ......................................................................... G-1
2. GENERAL PRECAUTIONS ............................................................................ G-2
3. HANDLING PRECAUTIONS FOR ELECTRICAL PARTS AND WIRING.. G-3
[1] WIRING ..................................................................................................... G-3
[2] BATTERY................................................................................................... G-5
[3] FUSE.......................................................................................................... G-5
[4] CONNECTOR............................................................................................ G-5
[5] HANDLING OF CIRCUIT TESTER......................................................... G-6
4. LUBRICANTS, FUEL AND COOLANT ......................................................... G-7
5. TIGHTENING TORQUES ............................................................................. G-10
[1] GENERAL USE SCREWS, BOLTS AND NUTS................................. G-10
6. MAINTENANCE ............................................................................................. G-11
7. CHECK AND MAINTENANCE..................................................................... G-14
[1] DAILY CHECK ........................................................................................ G-14
[2] CHECK POINTS OF INITIAL 50 HOURS........................................... G-15
[3] CHECK POINTS OF EVERY 50 HOURS........................................... G-19
[4] CHECK POINTS OF EVERY 100 HOURS........................................ G-22
[5] CHECK POINTS OF EVERY 200 HOURS......................................... G-27
[6] CHECK POINTS OF EVERY 400 HOURS......................................... G-31
[7] CHECK POINTS OF EVERY 600 HOURS......................................... G-31
[8] CHECK POINTS OF EVERY 800 HOURS......................................... G-31
[9] CHECK POINTS OF EVERY 1 YEAR ................................................ G-32
[10]CHECK POINTS OF EVERY 2 YEARS.............................................. G-32
[11]OTHERS .................................................................................................. G-34
8. SPECIAL TOOLS.......................................................................................... G-39
[1] SPECIAL TOOLS FOR ENGINE .......................................................... G-39
[2] SPECIAL TOOLS FOR TRACTOR....................................................... G-47
9. TIRES............................................................................................................. G-55
[1] TIRE PRESSURE ................................................................................... G-55
[2] TREADS ADJUSTMENT ........................................................................ G-56
(1) Front Wheels...................................................................................... G-56
(2) Rear Wheels ...................................................................................... G-56
[3] TIRE LIQUID INJECTION...................................................................... G-58
KiSC issued 02, 2007 A
3. G-1
L3130 · L3430 · L3830 · L4630 · L5030, WSM G GENERAL
1. TRACTOR IDENTIFICATION
When contacting your local KUBOTA distributor, always specify
engine serial number, tractor serial number and hour meter reading.
W10106000
(1) Tractor Identification Plate
(2) CABIN Identification Plate
(CABIN Serial Number)
(3) Tractor Serial Number
(4) Engine Serial Number
(5) Hour Meter (IntelliPanel Display)
(6) ROPS Identification Plate
(ROPS Serial Number)
KiSC issued 02, 2007 A
4. G-2
L3130 · L3430 · L3830 · L4630 · L5030, WSM G GENERAL
2. GENERAL PRECAUTIONS
• During disassembly, carefully arrange removed parts in a clean
area to prevent confusion later. Screws, bolts and nuts should be
installed in their original position to prevent reassembly errors.
• When special tools are required, use KUBOTA genuine special
tools. Special tools which are not frequently used should be
made according to the drawings provided.
• Before disassembling or servicing electrical wires, always
disconnect the ground cable from the battery first.
• Remove oil and dirt from parts before measuring.
• Use only KUBOTA genuine parts for parts replacement to
maintain machine performance and to assure safety.
• Gaskets and O-rings must be replaced during reassembly.
Apply grease to new O-rings or oil seals before assembling.
See the figure left side.
• When reassembling external snap rings or internal snap rings,
they must be positioned so that sharp edge faces against the
direction from which a force is applied. See the figure left side.
• When inserting spring pins, their splits must face the direction
from which a force is applied. See the figure left side.
• To prevent damage to the hydraulic system, use only specified
fluid or equivalent.
W10109040
(1) Grease
(2) Force
(3) Sharp Edge
(4) Axial Force
(5) Rotating Movement
(A) External Snap Ring
(B) Internal Snap Ring
KiSC issued 02, 2007 A
5. G-3
L3130 · L3430 · L3830 · L4630 · L5030, WSM G GENERAL
3. HANDLING PRECAUTIONS FOR ELECTRICAL PARTS
AND WIRING
To ensure safety and prevent damage to the machine and
surrounding equipment, heed the following precautions in handling
electrical parts and wiring.
IMPORTANT
■
• Check electrical wiring for damage and loosened
connection every year. To this end, educate the customer to
do his or her own check and at the same time recommend
the dealer to perform periodic check for a fee.
• Do not attempt to modify or remodel any electrical parts and
wiring.
• When removing the battery cables, disconnect the negative
cable first. When installing the battery cables, connect the
positive cable first.
W10111140
[1] WIRING
• Securely tighten wiring terminals.
W10112160
• Do not let wiring contact dangerous part.
W10113130
• Securely insert grommet.
W10113880
(1) Negative Terminal (2) Positive Terminal
(1) Correct
(Securely Tighten)
(2) Incorrect
(Loosening Leads to Faulty Contact)
(1) Wiring (Correct)
(2) Wiring (Incorrect)
(3) Dangerous Part
(4) Dangerous Part
(1) Grommet (A) Correct
(B) Incorrect
KiSC issued 02, 2007 A
6. G-4
L3130 · L3430 · L3830 · L4630 · L5030, WSM G GENERAL
• Securely clamp, being careful not to damage wiring.
W10114580
• Clamp wiring so that there is no twist, unnecessary sag, or
excessive tension, except for movable part, where sag be
required.
W10115870
• In installing a part, take care not to get wiring caught by it.
W10116700
• After installing wiring, check protection of terminals and clamped
condition of wiring, only connect battery.
W10117350
(1) Clamp
• Wind Clamp Spirally
(2) Wire Harness
(3) Clamp
(4) Welding Dent
(1) Wiring
(2) Clamp
(A) Correct
(B) Incorrect
(1) Wiring (A) Incorrect
(1) Cover
• Securely Install Cover
KiSC issued 02, 2007 A
7. G-5
L3130 · L3430 · L3830 · L4630 · L5030, WSM G GENERAL
[2] BATTERY
• Take care not to confuse positive and negative terminal posts.
• When removing battery cables, disconnect negative cable first.
When installing battery cables, check for polarity and connect
positive cable first.
• Do not install any battery with capacity other than is specified
(Ah).
• After connecting cables to battery terminal posts, apply high
temperature grease to them and securely install terminal covers
on them.
• Do not allow dirt and dust to collect on battery.
CAUTION
• Take care not to let battery liquid spill on your skin and
clothes. If contaminated, wash it off with water immediately.
• Before recharging the battery, remove it from the machine.
• Before recharging, remove cell caps.
• Do recharging in a well-ventilated place where there is no
open flame nearby, as hydrogen gas and oxygen are formed.
W10118160
[3] FUSE
• Use fuses with specified capacity.
Neither too large or small capacity fuse is acceptable.
• Never use steel or copper wire in place of fuse.
• Do not install working light, radio set, etc. on machine which is not
provided with reserve power supply.
• Do not install accessories if fuse capacity of reserve power
supply is exceeded.
W10120920
[4] CONNECTOR
• For connector with lock, push lock to separate.
W10122110
• In separating connectors, do not pull wire harnesses.
• Hold connector bodies to separate.
W10122720
(1) Fuse (2) Slow Blow Fuse
(A) Push
(A) Correct (B) Incorrect
KiSC issued 02, 2007 A
8. G-6
L3130 · L3430 · L3830 · L4630 · L5030, WSM G GENERAL
• Use sandpaper to remove rust from terminals.
• Repair deformed terminal. Make certain there is no terminal
being exposed or displaced.
W10123460
• Make certain that there is no female connector being too open.
W10124300
• Make certain plastic cover is large enough to cover whole
connector.
W10125190
[5] HANDLING OF CIRCUIT TESTER
• Use tester correctly following manual provided with tester.
• Check for polarity and range.
W10126840
(1) Exposed Terminal
(2) Deformed Terminal
(3) Sandpaper
(4) Rust
(A) Correct (B) Incorrect
(1) Cover (A) Correct
(B) Incorrect
KiSC issued 02, 2007 A
9. G-7
L3130 · L3430 · L3830 · L4630 · L5030, WSM G GENERAL
4. LUBRICANTS, FUEL AND COOLANT
* KUBOTA original transmission hydraulic fluid.
Place
Capacity
Lubricants, fuel and coolant
L3130 L3430 L3830
1 Fuel tank
40 L
10.6 U.S.gals
8.8 Imp.gals
No. 2-D diesel fuel
No. 1-D diesel fuel if temperature is
below −10 °C (14 °F)
2
Cooling system
(ROPS Type)
6.0 L
6.3 U.S.qts
5.3 Imp.qts
7.5 L
7.9 U.S.qts
6.6 Imp.qts
Fresh clean water with anti-freeze
Cooling system
(CABIN Type)
–
8.7 L
9.2 U.S.qts
7.7 Imp.qts
3
Engine
crankcase
(with filter)
5.7 L
6.0 U.S.qts
5.0 Imp.qts
6.7 L
7.1 U.S.qts
5.9 Imp.qts
Engine oil : API service
classification CD, CE or CF
Above 25 °C : SAE30,
(77 °F) 10W-30 or 10W-40
0 to 25 °C : SAE20,
(32 to 77 °F) 10W-30 or 10W-40
Below 0 °C : SAE10W,
(32 °F) 10W-30 or 10W-40
4
Transmission
case
42 L
11.1 U.S.gals
9.2 Imp.gals
43 L
11.4 U.S.gals
9.5 Imp.gals
KUBOTA UDT or SUPER UDT
fluid*
5 Front axle case
6.5 L
6.9 U.S.qts
5.7 Imp.qts
KUBOTA UDT or SUPER UDT
fluid* or SAE80, 90 gear oil
Greasing
Place No. of greasing point Capacity Type of grease
6
Front axle
support
2
Until grease
overflows Multipurpose
type grease
Top link 2
Top link bracket
(if equipped)
2 (with draft control)
Lift rod 1
Lift cylinder 4
Battery terminal 2 Moderate
amount
Throttle cable Oiling Engine oil
KiSC issued 02, 2007 A
10. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
11. G-8
L3130 · L3430 · L3830 · L4630 · L5030, WSM G GENERAL
* KUBOTA original transmission hydraulic fluid.
Place
Capacity
Lubricants, fuel and coolant
L4630 L5030
1 Fuel tank
40 L
10.6 U.S.gals
8.8 Imp.gals
43 L
11.4 U.S.gals
9.5 Imp.gals
No. 2-D diesel fuel
No. 1-D diesel fuel if temperature is
below −10 °C (14 °F)
2
Cooling system
(ROPS Type)
7.5 L
7.9 U.S.qts
6.6 Imp.qts
8.0 L
8.5 U.S.qts
7.0 Imp.qts
Fresh clean water with anti-freeze
Cooling system
(CABIN Type)
8.7 L
9.2 U.S.qts
7.7 Imp.qts
9.2 L
9.7 U.S.qts
8.1 Imp.qts
3
Engine
crankcase
(with filter)
8.2 L
8.7 U.S.qts
7.2 Imp.qts
Engine oil : API service
classification CD, CE or CF
Above 25 °C : SAE30,
(77 °F) 10W-30 or 10W-40
0 to 25 °C : SAE20,
(32 to 77 °F) 10W-30 or 10W-40
Below 0 °C : SAE10W,
(32 °F) 10W-30 or 10W-40
4
Transmission
case
43 L
11.4 U.S.gals
9.5 Imp.gals
45 L
11.9 U.S.gals
9.9 Imp.gals
KUBOTA UDT or SUPER UDT
fluid*
5 Front axle case
6.5 L
6.9 U.S.qts
5.7 Imp.qts
6.0 L
6.3 U.S.qts
5.3 Imp.qts
KUBOTA UDT or SUPER UDT
fluid* or SAE80, 90 gear oil
Greasing
Place No. of greasing point Capacity Type of grease
6
Front axle case
support
2
Until grease
overflows Multipurpose
type grease
Front axle
support
2
Top link 2
Top link bracket
(if equipped)
2 (with draft control)
Lift rod 1
Lift cylinder 4
Battery terminal 2 Moderate
amount
Throttle cable Oiling Engine oil
KiSC issued 02, 2007 A
12. G-9
L3130 · L3430 · L3830 · L4630 · L5030, WSM G GENERAL
■ NOTE
Engine Oil
• Oil used in the engine should have an American Petroleum Institute (API) service classification and Proper SAE
Engine OIl according to the ambient temperatures as shown above.
• With the emission control now in effect, the CF-4 and CG-4 lubricating oils have been developed for use of a low-
fulfur fuel on on-road vehicle engines. When an off-orad vehicle engine runs on a high-sulfur fuel, it is advisable
to employ the CF, CD or CE lubricating oil with a high total base number. If the CF-4 or CG-4 lubricating oil is
used with a high-sulfur fuel, change the lubricating oil at shorter intervals.
• Lubricating oil recommended when a low-sulfur or high-sulfur fuel is employed.
❍ : Recommendable X : Not recommendable
W1035555
Fuel
Lubricating
oil class
Low sulfur High sulfur Remarks
CF ❍ ❍ TBN ≥ 10
CF-4 ❍ X
CG-4 ❍ X
KiSC issued 02, 2007 A
13. G-10
L3130 · L3430 · L3830 · L4630 · L5030, WSM G GENERAL
5. TIGHTENING TORQUES
Screws, bolts and nuts whose tightening torques are not specified in this Workshop Manual should be
tightened according to tables below.
[1] GENERAL USE SCREWS, BOLTS AND NUTS
W10345420
Indication on top of
bolt
No-grade or 4T 7T 9T
Material of bolt SS400, S20C S43C, S48C
SCr435,
SCM435
Material of opponent
part
Ordinariness Aluminum Ordinariness Aluminum Ordinariness
Unit
Diameter
N·m kgf·m ft-lbs N·m kgf·m ft-lbs N·m kgf·m ft-lbs N·m kgf·m ft-lbs N·m kgf·m ft-lbs
M6
(6 mm, 0.24 in.)
7.85
to
9.31
0.80
to
0.95
5.79
to
6.87
7.85
to
8.82
0.80
to
0.90
5.79
to
6.50
9.81
to
11.2
1.00
to
1.15
7.24
to
8.31
7.85
to
8.82
0.80
to
0.90
5.79
to
6.50
12.3
to
14.2
1.25
to
1.45
9.05
to
10.4
M8
(8 mm, 0.31 in.)
17.7
to
20.5
1.8
to
2.1
13.1
to
15.1
16.7
to
19.6
1.7
to
2.0
12.3
to
14.4
23.6
to
27.4
2.4
to
2.8
17.4
to
20.2
17.7
to
20.5
1.8
to
2.1
13.1
to
15.1
29.5
to
34.3
3.0
to
3.5
21.7
to
25.3
M10
(10 mm, 0.39 in.)
39.3
to
45.1
4.0
to
4.6
29.0
to
33.2
31.4
to
34.3
3.2
to
3.5
23.2
to
25.3
48.1
to
55.8
4.9
to
5.7
35.5
to
41.2
39.3
to
44.1
4.0
to
4.5
29.0
to
32.5
60.9
to
70.6
6.2
to
7.2
44.9
to
52.0
M12
(12 mm, 0.47 in.)
62.8
to
72.5
6.4
to
7.4
46.3
to
53.5
– – –
77.5
to
90.2
7.9
to
9.2
57.2
to
66.5
62.8
to
72.5
6.4
to
7.4
46.3
to
53.5
103
to
117
10.5
to
12.0
76.0
to
86.7
M14
(14 mm, 0.55 in.)
108
to
125
11.0
to
12.8
79.6
to
92.5
– – –
124
to
147
12.6
to
15.0
91.2
to
108
– – –
167
to
196
17.0
to
20.0
123
to
144
M16
(16 mm, 0.63 in.)
167
to
191
17.0
to
19.5
123
to
141
– – –
197
to
225
20.0
to
23.0
145
to
166
– – –
260
to
304
26.5
to
31.0
192
to
224
M18
(18 mm, 0.71 in.)
246
to
284
25.0
to
29.0
181
to
209
– – –
275
to
318
28.0
to
32.5
203
to
235
– – –
344
to
402
35.0
to
41.0
254
to
296
M20
(20 mm, 0.79 in.)
334
to
392
34.0
to
40.0
246
to
289
– – –
368
to
431
37.5
to
44.0
272
to
318
– – –
491
to
568
50.0
to
58.0
362
to
419
KiSC issued 02, 2007 A
14. G-11
L3130 · L3430 · L3830 · L4630 · L5030, WSM G GENERAL
6. MAINTENANCE
IMPORTANT
■
• The jobs indicated by ★ must be done after the first 50 hours of operation.
• *1 : Air cleaner should be cleaned more often in dusty conditions than in normal conditions.
• *2 : Every year or every 6 times of cleaning.
• *3 : Replace only if necessary.
• *4 : Consult your local KUBOTA distributor for this service.
• *5 : When the battery is used for less than 100 hours per year, check the battery condition by reading the indication annually.
• The items listed above (@ marked) are registered as emission related critical parts by KUBOTA in the U.S.EPA nonroad emission
regulation. As the engine owner, you are responsible for the performance of the required maintenance on the engine according to
the above instruction. Please see the Warranty Statement in detail.
W10357690
No.
Period
Item
Indication on hour meter
Important
Reference
page
50 100 150 200 250 300 350 400 450 500
1 Brake Adjust ★ ✩ ✩ ✩ ✩ ✩ G-18
2 Engine oil Change ★ ✩ ✩ ✩ ✩ ✩ G-15
3 Engine oil filter Replace ★ ✩ ✩ G-15
4 Hydraulic oil filter Replace ★ ✩ ✩ G-16
5 Transmission fluid Change ★ ✩ G-17
6 Front axle case oil Change ★ ✩ G-18
7 Engine start system Check ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ G-20, 21
8 Wheel bolt torque Check ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ G-21
9 Greasing – ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ ✩ G-19
10 Battery condition Check ✩ ✩ ✩ ✩ ✩ *5 G-25
11
Air cleaner
element
[Double type]
Primary
element
Clean ✩ ✩ ✩ ✩ ✩ *1 G-22
Replace *2 G-32
Secondary
element
Replace G-32
12 Clutch Adjust ✩ ✩ ✩ ✩ ✩ G-24
13 Parking brake (cable)
Adjust ✩ ✩ ✩ ✩ ✩ G-27
Replace G-27
14 Fuel filter element
Clean ✩ ✩ ✩ ✩ ✩ G-23
Replace ✩ G-31
15 Fan belt Adjust ✩ ✩ ✩ ✩ ✩ G-23
16 Fuel line
Check ✩ ✩ ✩ ✩ ✩ G-24
Replace G-32
17 Transmission oil filter [HST] Replace ✩ ✩ G-16
18 HST oil line [HST]
Check ✩ ✩ G-29
Replace *3 G-32
19 Radiator hose and clamp
Check ✩ ✩ G-27
Replace G-32
20 Power steering oil line
Check ✩ ✩ G-29
Replace G-32
21 Toe-in Adjust ✩ ✩ G-28
22 Front axle pivot Adjust ✩ G-31
23 Engine valve clearance Adjust ✩ *4 1-S27
24 Cooling system Flush ✩ G-33
25 Coolant Change ✩ G-33
26 Fuel system Bleed G-34
27 Clutch housing water Drain G-35
28 Fuse Replace G-36
29 Light bulb Replace G-37
KiSC issued 02, 2007 A
15. G-12
L3130 · L3430 · L3830 · L4630 · L5030, WSM G GENERAL
IMPORTANT
■
• The jobs indicated by ★ must be done after the first 50 hours of operation.
• *1 : Air cleaner should be cleaned more often in dusty conditions than in normal conditions.
• *2 : Every year or every 6 times of cleaning.
• *3 : Replace only if necessary.
• *4 : Consult your local KUBOTA distributor for this service.
• *5 : When the battery is used for less than 100 hours per year, check the battery condition by reading the indication annually.
• The items listed above (@ marked) are registered as emission related critical parts by KUBOTA in the U.S.EPA nonroad emission
regulation. As the engine owner, you are responsible for the performance of the required maintenance on the engine according to
the above instruction. Please see the Warranty Statement in detail.
W10511390
No.
Period
Item
Indication on hour meter After purchase
Important
Reference
page
550 600 650 700 750 800 1 year 2 years
1 Brake Adjust ✩ ✩ ✩ G-18
2 Engine oil Change ✩ ✩ ✩ G-15
3 Engine oil filter Replace ✩ ✩ G-15
4 Hydraulic oil filter Replace ✩ ✩ G-16
5 Transmission fluid Change ✩ G-17
6 Front axle case oil Change ✩ G-18
7 Engine start system Check ✩ ✩ ✩ ✩ ✩ ✩ G-20, 21
8 Wheel bolt torque Check ✩ ✩ ✩ ✩ ✩ ✩ G-21
9 Greasing – ✩ ✩ ✩ ✩ ✩ ✩ G-19
10 Battery condition Check ✩ ✩ ✩ *5 G-25
11
Air cleaner
element
[Double type]
Primary
element
Clean ✩ ✩ ✩ *1 G-22
Replace ✩ *2 G-22
Secondary
element
Replace ✩ G-32
12 Clutch Adjust ✩ ✩ ✩ G-24
13 Parking brake (cable)
Adjust ✩ ✩ ✩ G-27
Replace ✩ G-27
14 Fuel filter element
Clean ✩ ✩ ✩ G-23
Replace ✩ G-31
15 Fan belt Adjust ✩ ✩ ✩ G-23
16 Fuel line
Check ✩ ✩ ✩ G-24
Replace ✩ *3 G-32
17 Transmission oil filter [HST] Replace ✩ ✩ G-16
18 HST oil line [HST]
Check ✩ ✩ G-29
Replace ✩ G-32
19 Radiator hose and clamp
Check ✩ ✩ G-27
Replace ✩ G-32
20 Power steering oil line
Check ✩ ✩ G-29
Replace ✩ G-32
21 Toe-in Adjust ✩ ✩ G-28
22 Front axle pivot Adjust ✩ G-31
23 Engine valve clearance Adjust ✩ *4 1-S27
24 Cooling system Flush ✩ G-33
25 Coolant Change ✩ G-33
26 Fuel system Bleed
Service as
required
G-34
27 Clutch housing water Drain G-35
28 Fuse Replace G-36
29 Light bulb Replace G-37
KiSC issued 02, 2007 A