This shop manual provides instructions for servicing a Komatsu D21A, P-8 bulldozer with a serial number of 83001 or higher. The manual contains sections on general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics. This section explains how to remove the fuel injection pump assembly. The steps include removing guards, disconnecting hoses and electrical connectors, loosening mounting nuts, and recording positions of gears to ensure proper reinstallation. Care is required to not lose parts and maintain correct alignments.
Komatsu D41E-6 Dozer Bulldozer Service Repair Manual S/N 50001 and upjkmnsmd eukdmm
This is the Highly Detailed factory service repair manual for theKOMATSU D41E-6 DOZER BULLDOZER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KOMATSU D41E-6 DOZER BULLDOZER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveKOMATSU D41E-6 DOZER BULLDOZER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Komatsu D41E-6 Dozer Bulldozer Service Repair Manual S/N 50001 and upjkmnsmd eukdmm
This is the Highly Detailed factory service repair manual for theKOMATSU D41E-6 DOZER BULLDOZER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KOMATSU D41E-6 DOZER BULLDOZER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveKOMATSU D41E-6 DOZER BULLDOZER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
2. 00-2 D21A, P-8
CONTENTS
No. of page
01 GENERAL ......................................................................... 01-1
10 STRUCTURE AND FUNCTION ....................................... 10-1
20 TESTING AND ADJUSTING........................................... 20-1
30 DISASSEMBLY AND ASSEMBLY .................................. 30-1
40 MAINTENANCE STANDARD.......................................... 40-1
90 OTHERS............................................................................ 90-1
(2)
3. SAFETY SAFETY NOTICE
00-3
SAFETY
SAFETY NOTICE
IMPORTANT SAFETY NOTICE
Proper service and repair is extremely important for safe machine operation. The service and
repair techniques recommended by Komatsu and described in this manual are both effective
and safe. Some of these techniques require the use of tools specially designed by Komatsu for
the specific purpose.
To prevent injury to workers, the symbol k is used to mark safety precautions in this manual.
The cautions accompanying these symbols should always be followed carefully. If any danger-
ous situation arises or may possibly arise, first consider safety, and take the necessary actions
to deal with the situation.
GENERAL PRECAUTIONS
Mistakes in operation are extremely dangerous.
Read the Operation and Maintenance Manual care-
fully BEFORE operating the machine.
1. Before carrying out any greasing or repairs, read
all the precautions given on the decals which are
fixed to the machine.
2. When carrying out any operation, always
wear safety shoes and helmet. Do not wear
loose work clothes, or clothes with buttons
missing.
• Always wear safety glasses when hitting
parts with a hammer.
• Always wear safety glasses when grinding
parts with a grinder, etc.
3. If welding repairs are needed, always have a
trained, experienced welder carry out the work.
When carrying out welding work, always wear
welding gloves, apron, hand shield, cap and
other clothes suited for welding work.
4. When carrying out any operation with two or
more workers, always agree on the operating
procedure before starting. Always inform your
fellow workers before starting any step of the
operation. Before starting work, hang UNDER
REPAIR signs on the controls in the operator's
compartment.
5. Keep all tools in good condition and learn the
correct way to use them.
6. Decide a place in the repair workshop to keep
tools and removed parts. Always keep the tools
and parts in their correct places. Always keep
the work area clean and make sure that there is
no dirt or oil on the floor. Smoke only in the areas
provided for smoking. Never smoke while work-
ing.
PREPARATIONS FOR WORK
7. Before adding oil or making any repairs, park the
machine on hard, level ground, and block the
wheels or tracks to prevent the machine from
moving.
8. Before starting work, lower blade, ripper, bucket
or any other work equipment to the ground. If
this is not possible, insert the safety pin or use
blocks to prevent the work equipment from fall-
ing. In addition, be sure to lock all the control
levers and hang warning signs on them.
9. When disassembling or assembling, support the
machine with blocks, jacks or stands before
starting work.
10.Remove all mud and oil from the steps or other
places used to get on and off the machine.
Always use the handrails, ladders or steps when
getting on or off the machine. Never jump on or
off the machine. If it is impossible to use the
handrails, ladders or steps, use a stand to pro-
vide safe footing.
4. SAFETY SAFETY NOTICE
00-4
PRECAUTIONS DURING WORK
11.When removing the oil filler cap, drain plug or
hydraulic pressure measuring plugs, loosen
them slowly to prevent the oil from spurting out.
Before disconnecting or removing components
of the oil, water or air circuits, first remove the
pressure completely from the circuit.
12.The water and oil in the circuits are hot when the
engine is stopped, so be careful not to get
burned.
Wait for the oil and water to cool before carry-
ing out any work on the oil or water circuits.
13.Before starting work, remove the leads from the
battery. Always remove the lead from the nega-
tive (–) terminal first.
14.When raising heavy components, use a hoist or
crane.
Check that the wire rope, chains and hooks are
free from damage.
Always use lifting equipment which has ample
capacity.
Install the lifting equipment at the correct places.
Use a hoist or crane and operate slowly to pre-
vent the component from hitting any other part.
Do not work with any part still raised by the hoist
or crane.
15.When removing covers which are under internal
pressure or under pressure from a spring,
always leave two bolts in position on opposite
sides. Slowly release the pressure, then slowly
loosen the bolts to remove.
16.When removing components, be careful not to
break or damage the wiring. Damaged wiring
may cause electrical fires.
17.When removing piping, stop the fuel or oil from
spilling out. If any fuel or oil drips onto the floor,
wipe it up immediately. Fuel or oil on the floor
can cause you to slip, or can even start fires.
18.As a general rule, do not use gasoline to wash
parts. In particular, use only the minimum of
gasoline when washing electrical parts.
19.Be sure to assemble all parts again in their origi-
nal places.
Replace any damaged parts with new parts.
• When installing hoses and wires, be sure
that they will not be damaged by contact
with other parts when the machine is being
operated.
20.When installing high pressure hoses, make sure
that they are not twisted. Damaged tubes are
dangerous, so be extremely careful when install-
ing tubes for high pressure circuits. Also, check
that connecting parts are correctly installed.
21.When assembling or installing parts, always use
the specified tightening torques. When installing
protective parts such as guards, or parts which
vibrate violently or rotate at high speed, be par-
ticularly careful to check that they are installed
correctly.
22.When aligning two holes, never insert your fin-
gers or hand. Be careful not to get your fingers
caught in a hole.
23.When measuring hydraulic pressure, check that
the measuring tool is correctly assembled before
taking any measurements.
24.Take care when removing or installing the tracks
of track-type machines.
When removing the track, the track separates
suddenly, so never let anyone stand at either
end of the track.
5. FOREWORD GENERAL
00-5
FOREWORD
GENERAL
This shop manual has been prepared as an aid to improve the quality of repairs by giving the serviceman an
accurate understanding of the product and by showing him the correct way to perform repairs and make judge-
ments. Make sure you understand the contents of this manual and use it to full effect at every opportunity.
This shop manual mainly contains the necessary technical information for operations performed in a service
workshop. For ease of understanding, the manual is divided into the following chapters; these chapters are fur-
ther divided into the each main group of components.
STRUCTURE AND FUNCTION
This section explains the structure and function of each component. It serves not only to give an under-
standing of the structure, but also serves as reference material for troubleshooting.
In addition, this section may contain hydraulic circuit diagrams, electric circuit diagrams, and mainte-
nance standards.
TESTING AND ADJUSTING
This section explains checks to be made before and after performing repairs, as well as adjustments to
be made at completion of the checks and repairs.
Troubleshooting charts correlating "Problems" with "Causes" are also included in this section.
DISASSEMBLY AND ASSEMBLY
This section explains the procedures for removing, installing, disassembling and assembling each com-
ponent, as well as precautions for them.
MAINTENANCE STANDARD
This section gives the judgment standards for inspection of disassembled parts.
The contents of this section may be described in STRUCTURE AND FUNCTION.
OTHERS
This section mainly gives hydraulic circuit diagrams and electric circuit diagrams.
In addition, this section may give the specifications of attachments and options together.
NOTICE
The specifications contained in this shop manual are subject to change at any time and without any
advance notice. Use the specifications given in the book with the latest date.
6. DISASSEMBLY AND ASSEMBLY FUEL INJECTION PUMP
REMOVAL OF FUEL
INJECTION PUMP ASSEMBLY
1. Remove the radiator guard assembly. For details,
see REMOVAL OF RADIATOR GUARD ASSEMBLY.
2. Remove the right front engine mount and mount
bracket. 4 5
3. Loosen the fan belt and remove fan (1).
4. Before removing fuel injection pump (2), remove
the cover in front of the timing gear case. Using
paint, make match marks on the meshing parts
of pump drive gear (3) and idle gear (4).
5. Accurately record the relative positions of stamped
line (5) of the fuel injection pump body and
stamped line (6) of the gear case with mark-off
lines (7), etc.
6. Remove fuel high pressure injection pipe (8).
1
7. Disconnect fuel hoses (9) and (10) and engine
stop solenoid connector (SO1).
D21A, P-830-6
(4)
7. DISASSEMBLY AND ASSEMBLY FUEL INJECTION PUMP
8. Remove lubrication tube (11) and 3 fuel injection
pump mounting nuts (12).
9. Remove nut (13) from the fuel injection pump drive
shaft end. 2
fl Take care not to drop the nut in the case.
fl Never loosen mounting bolt (14) of pump
drive gear (3) and flange.
(If the relative positions of the flange and
fuel injection pump drive gear change, it be-
comes very difficult to adjust the fuel injec-
tion timing.)
10. Using a puller, push the fuel injection pump drive
shaft out of the gear and remove fuel injection
pump assembly (2). 3
INSTALLATION OF FUEL
INJECTION PUMP ASSEMBLY
fl Carry out installation in the reverse order to re-
moval.
1
fl For installation of the fuel high-pressure injection
pipe, see the illustration at right.
2
3 Nut at shaft end: 113 – 123 Nm
{11.5 – 12.5 kgm}
3
fl Install the fuel injection pump temporarily and
tighten the nut at the shaft end first.
fl Adjust the fuel injection angle. For details, see
TESTING AND ADJUSTING, Testing and adjust-
ing fuel injection timing.
D21A, P-8 30-7
(4)
8. DISASSEMBLY AND ASSEMBLY FUEL INJECTION PUMP
D21A, P-830-7-1
(4)
4
3 Mounting bolt of mount bracket:
59 – 74 Nm {6 – 7 kgm}
5
fl Check the distinguishing marks on the front and
rear engine mount rubbers when installing.
• Front: [ZZ ]embossed mark
• Rear: Round blue paint mark
2 Thread of engine mount mounting bolt:
Thread tightener (LT-2)
3 Engine mount mounting bolt:
277 ±31.9 Nm (28.25 ±3.25 kgm)
9. D21A, P-830-8
(1)
DISASSEMBLY AND ASSEMBLY RADIATOR GUARD
REMOVAL OF RADIATOR
GUARD ASSEMBLY
1. Drain coolant.
2. Remove left and right engine side covers (3), en-
gine hood (4), and radiator grill (5).
3. Disconnect oil cooler hoses (7) from power train
oil cooler (6).
fl After disconnecting, install blind plugs to pre-
vent the oil from leaking.
4. Disconnect radiator hoses (8) and (9), and front
lamp wiring harness (10).
5. Remove fan guard (11) and fan (12).
6. Disconnect the clamp of fuel hose (14) from the
radiator guard.
7. Disconnect headlamp wiring harness (10).
10. D21A, P-8 30-9
(1)
8. Install wires to the radiator upper bracket and lift
off radiator guard assembly (13).
4 Radiator guard assembly: 65 kg
DISASSEMBLY AND ASSEMBLY RADIATOR GUARD
INSTALLATION OF RADIATOR
GUARD ASSEMBLY
• Carry out installation in the reverse order to re-
moval.
• Refilling with coolant
fl Add coolant through coolant filler to the speci-
fied level.
fl Run the engine to circulate the coolant through
the system. Then check the coolant level again.
• Refilling with oil (transmission case)
fl Add engine oil through oil filler to the speci-
fied level.
fl Run the engine to circulate the oil through the
system. Then check the oil level again.
11. D21A, P-830-10
(1)
DISASSEMBLY AND ASSEMBLY ENGINE
REMOVAL OF ENGINE
ASSEMBLY
Disconnect the cable from the negative (–) termi-
nal of the battery.
1. Remove the radiator guard assembly. For details,
see REMOVAL OF RADIATOR GUARD ASSEMBLY.
2. Remove the cover and drain the hydraulic oil.
6 Hydraulic tank: Approx. 21 ¬
3. Disconnect alternator wiring harness (1) and start-
ing motor wiring harness (2).
4. Disconnect air heater relay wiring harnesses (3)
(HE1) and (4) (HE2).
5. Disconnect ground wiring harness (5).
6. Disconnect fuel hoses (6) and (7). 1
fl Plug the hoses to stop the fuel from leaking
out.
7. Disconnect fuel control rod (8). 2
12. D21A, P-8 30-11
(1)
DISASSEMBLY AND ASSEMBLY ENGINE
8. Disconnect engine oil pressure sensor connector
(9), engine stop solenoid connector (10), and dust
indicator connector (11).
9. Disconnect work equipment pump suction hose
(12) from the rear of the fuel injection pump.
10. Remove the floor plate and disconnect work
equipment pump outlet hose (13) from the top of
the right rear engine mount.
11. Disconnect universal joint (14) from the damper
end. 3
12. Remove the engine mounting bolts and lift off
engine assembly (15). 4
4 Engine assembly: 300 kg
fl When removing the engine assembly, take
care of the center of gravity and check that
all the pipes and wires are disconnected.
fl When storing the engine mount rubbers,
make marks of the front and rear sides on
them.
13. D21A, P-830-12
(1)
DISASSEMBLY AND ASSEMBLY ENGINE
INSTALLATION OF ENGINE
ASSEMBLY
• Carry out installation in the reverse order to re-
moval.
1
fl Bleed the air from fuel circuit.
fl For details, see TESTING AND ADJUSTING,
Bleeding air from fuel circuit.
2
fl Adjust the cable.
For details, see TESTING AND ADJUSTING,
Adjusting fuel control cable.
3
3 Universal joint mounting bolt:
30.1 ± 3.4 Nm (3.15 ± 0.35 kgm)
4
fl Check the distinguishing marks on the front
and rear engine mount rubbers when install-
ing.
• Front: [ZZ] embossed mark
• Rear: Round blue paint mark
2 Thread of engine mount mounting bolt:
Thread tightener (LT-2)
3 Engine mount mounting bolt:
277 ± 31.9 Nm (28.25 ± 3.25 kgm)
• Refilling with coolant
fl Add coolant through coolant filler to the speci-
fied level.
fl Run the engine to circulate the coolant through
the system. Then check the coolant level again.
• Refilling with oil (transmission case, hydraulic
tank)
Add engine oil through oil filler to the specified
level.
fl Run the engine to circulate the oil through
the system. Then check the oil level again.
14.
15.
16.
17.
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.