California; Guide to Conserving Water through Rainwater Harvesting & Graywater Reuse for Outdoor Use - City of Berkeley

1. to Conserving Water through
guide Rainwater Harvesting &
Graywater Reuse for Outdoor Use
Berkeley’s
Best
builders
A program of the
City of Berkeley
Green Building
Initiative
2010
www.cityofberkeley.info/sustainable

2. The Guide to Conserving Water through Rainwater Harvesting and
Graywater Reuse for Outdoor Use is designed to give homeowners an over-
view of graywater and rainwater irrigation systems including information on systems
that do not require permits. Additionally, this guide gives information on permitting re-
quirements for installing more complicated residential graywater and rainwater harvest-
ing systems.
Save Water and Money by Irrigating with Graywater & Rainwater
Graywater and rainwater systems are alternative plumbing systems that help to conserve
our limited water supply. Currently, most of us use clean drinking water straight from the tap to
water our gardens. Graywater and rainwater systems give you another water choice for irrigat-
ing and can save you money on your water bill. Using non-potable water to irrigate your gar-
den can also help replenish local aquifers and protect the San Francisco Bay. Graywaterand
rainwater are different with distinct requirements for system design and permitting.
Graywater is untreated household wastewater generated from hand wash-
ing, laundry and bathing. This wastewater can be diverted from the sewer to
irrigate outdoor plants and landscape. Graywater cannot include any wastewater
from toilets, kitchen sinks, dishwashers or washing machines laundering soiled
diapers or other sources of contamination such as darkrooms. Graywater cannot
be stored for more than 24 hours. Graywater is different than potable tap water
and requires specific measures for its safe reuse in your garden.
Rainwater harvesting is collected precipitation from rooftops and other
above-ground impervious surfaces that is stored in catchment tanks for
later use. Rainwater harvesting systems can range from a simple barrel at the
bottom of a downspout to multiple cisterns with pumps and filtration. The har-
vested rainwater is low in sodium and chloramine and fluoride free. Rainwater is
different than potable tap water and requires specific measures for its safe reuse
in your garden.
To design your alternative plumbing system you should know:
How much water is needed for your garden?
How much water will be produced from your graywater or rainwater systems?
What type of water do the plants need (rainwater is acidic, graywater is basic)?
When do you need it (daily, monthly, bi-annually)?
Where are you going to get it from (shower, sink, roof)?
How are you going to deliver the water to the garden (pump system, gravity flow)?
Which distribution system do you plan to use (sub-surface, drip, mulch basin)?
Table of Contents:
Types of Graywater Systems ————————————–— 1
Graywater Washing Machine System Requirements—–—–-- 2
Types of Rainwater Harvesting Systems ———–———––—- 4
Rain Barrel System Requirements ——–———————–-— 6
Distribution Methods ——————–———————-——–— 7
Glossary ————–——————–———————–———-– 9
Resources ———————————–————————-—- 10

3. Residential Graywater Systems
Graywater systems directly reuse ―wastewater‖ to irrigate your plants. Therefore it is impor-
tant that you do not use any detergents or bleaches in your sink, bath and laundry that may
ultimately be harmful to your plants. To further ensure safety, graywater cannot be used on
the edible portions of vegetables and must be used for sub-surface irrigation in order to reduce human
contact or ponding. You cannot store graywater so only divert the amount needed to water your garden.
All systems must be installed and maintained according to Ch.16A of the California Plumbing Code.
(See page 3 for more Code information.)
Types of Graywater Systems:
There are three types of graywater systems that vary in complexity, volume of water produced and per-
mitting requirements. In order to determine which system is right for you, you need to know your irriga-
tion needs, including yard size, soil type, groundwater level and budget. The easiest, most low-tech sys-
tem uses a washing machine and gravity to move laundry water directly out to the garden.
Clothes Washer System (no permit required) Laundry-to-landscape systems divert gray-
water from the washing machine to your garden without cutting into existing plumbing.
Washing machines have internal pumps which can be used to pump water directly out to the
garden. No permit is required as long as no pump (other than the washing machine itself)
or surge tank is used. See more information on pages 2-3.
Simple System (Less than 250 gallons a day) These systems include reusing water from
a bathroom sink or shower. Simple systems require permits and involve altering plumbing
and can include surge tanks and pumps. For an example of a simple system, see the dia-
gram below.
Complex System (Greater than 250 gallons a day) These systems supply a large volume
of water. Complex systems rely on pumps, surge tanks, filtration systems and are expensive
to install and require ongoing maintenance. Complex systems must be designed by a quali-
fied professional.
Permitting Requirements:
System Type Plumbing Electrical Building Zoning Requirements
Permit Permit Permit
Clothes Washer System No* No No None
Simple (<250 gallons) Yes Yes, No** Check with Zoning for
if pump storage system
Complex (>250 gallons Yes Yes, No** requirements for your
if pump neighborhood.
* A permit shall not be required for a clothes washer system that does not cut or alter the existing plumbing piping as long as it is in compliance with the Graywater System
Requirements (2007 California Plumbing Code Section 1603A.1). See page 3 for more information. Clothes washer systems with a tank and/or pump will require a permit.
** If the tank height is greater than twice the width of the base and over 5000 gallons, a building permit, plans and calculations for foundation and anchoring of tank are re-
quired.
Sample Simple System Drawing:
This system shows graywater being
diverted from the sink and bathtub to a Toilet Sink
row of plants via an irrigation system. Vent
Toilet water can not be used for gray- Bath Tub
water and must exit the house through
the main sewer line. 3 way Surge Tank
Valve
Overflow
This system also shows a surge tank for
temporarily holding back large drain
flows (for 24 hours or less), a 3-way
valve to switch between the graywater Graywater out
system and the sewer system and a Overflow
vent to allow for air circulation. Main Sewer Line Irrigation System
1

4. Graywater Clothes Washer System: Laundry-to-Landscape
No permit is required for a clothes washing machine, providing all system design and
code requirements are met as outlined in Chapter 16A of the 2007 California Plumb-
ing Code (see page 3). Permits are required for systems that include tanks or pumps.
Washing machine systems are the least complicated type of graywater system. They are great for gar-
dens with minimal irrigation needs, are low-cost, easy to install, and require very little maintenance.
Designing a Clothes Washer System:
Attach washing machine discharge hose to either a 3-way valve to switch between a graywater sys-
tem and the sewer or a second standpipe. Graywater must be capable of being reconnected to the
sewer.
Graywater then travels out to the garden. A mulch basin with 2‖ cover is the simplest system for
distribution and irrigation (see distribution descriptions & diagrams on page 7).
Clearly label flow direction to sewer or yard. Once outside the building, the discharge must drain
directly to the disposal field by hose or pipe. Piping at five foot increments & at hose connection
point is to be permanently labeled: “CAUTION: NONPOTABLE WATER, DO NOT DRINK”
All graywater must be used the same day it was produced.
For a complete list of clothes washer graywater system code requirements see page 3.
Clothes Washer System Drawings:
Two examples of methods to divert graywater to the garden
Second Standpipe Method Three-Way Valve Method
Label on wall showing flow Label on wall showing flow direction To Sewer
To direction of 2nd standpipe of 3-way valve
Garden
To Garden
Second stand pipe to garden
Maintain air gap!
Washing machine hose
to sanitary sewer
Clothes 1‖ PVC Pipe
Washing
Machine 3-way valve
Clothes Washing
The second standpipe is installed in the wall or through the floor Machine
before it goes out to the garden. The clothes washing machine
hose is moved by hand from the normal building sewer connec-
tion to the irrigation system standpipe.
Graywater Tips for Success
A three-way valve and piping are assembled to switch
Shade and acid loving plants don’t like graywater. between the normal building sewer connection and the
Ingredients in washing machine detergents such as irrigation system. A vacuum breaker or backflow device
may be required for proper operation depending on site
bleaches, salts or borax may not be good for your elevations. Consult a plumber or graywater specialist.
garden. Use plant safe alternatives.
To ensure proper operation, regularly monitor and Remember: Graywater is not like
maintain all pipes and irrigation equipment for clog- rainwater; it cannot be stored!
ging, overflow, ponding, odors and other issues.
2

5. Graywater Clothes Washer System: Laundry-to-Landscape
The text below is taken from the 2007 California Plumbing Code Chapter 16A. No
permit is required for a clothes washer graywater system providing all system de-
sign and code requirements are met as outlined below.
California Plumbing Code: www.hcd.ca.gov/codes/shl/2007CPC_Graywater_Complete_2-2-10.pdf
Clothes Washer System Requirements from 2007 California Plumbing Code:
1. Registration of your system with the City of Berkeley Building Department is not required.
2. The design shall allow the user to direct the flow either to the irrigation or disposal field or
the building sewer. The direction control of the graywater shall be clearly labeled and read-
ily accessible to the user.
3. The installation, change, alteration or repair of the system does not include a potable water
connection or a pump and does not affect other building, plumbing, electrical or mechanical
components including structural features, egress, fire-life safety, sanitation, potable water
supply piping or accessibility.
Note: The pump in a clothes washer shall not be considered part of the graywater system.
4. The graywater shall be contained on the site where it is generated.
5. Graywater shall be directed to and contained within an irrigation, mulch basin, or disposal
field.
6. Ponding or runoff is prohibited, and shall be considered a nuisance.
7. Graywater may be released above the ground surface provided at least two (2) inches
(51mm) of mulch, rock or soil or a solid shield covers the release point. Other methods
which provide equivalent separation are also acceptable.
8. Graywater systems shall be designed to minimize contact with humans and domestic pets.
9. Water used to wash diapers or similarly soiled or infectious garments shall not be used and
shall be diverted to the building sewer.
10. Graywater shall not contain hazardous chemicals derived from activities such as cleaning
car parts, washing greasy or oily rags or disposing of waste solution form home photo labs
or similar hobbyist or home occupational activities.
11. Exemption from construction permit requirements of this code shall not be deemed to grant
authorization for any graywater system to be installed in a manner that violates other provi-
sions of this code or any other laws or ordinances of the City of Berkeley.
12. All systems shall have a maintenance manual. The manual is to remain with the building
throughout the life of the system and indicate that upon change of ownership or occupancy,
the new owner or tenant shall be notified that the structure contains a graywater system.
Proper system design, maintenance and use are the responsibility of the system
owner, not the City of Berkeley.
3

6. Residential Rainwater Harvesting Systems
The state of California does not have explicit code language for rainwater har-
vesting. The City of Berkeley developed rainwater harvesting permitting re-
quirements which can be accessed at: www.cityofberkeley.info/planning
Rainwater Overview
Berkeley averages roughly 20 inches of rain a year. That rainwater currently flows off your roof, into a
storm drain and out to the San Francisco Bay. Rainwater harvesting systems collect precipitation from
rooftops and other above-ground impervious surfaces and store the water in catchment tanks for later
use. Rainwater harvesting systems can range from a simple barrel at the bottom of a downspout to mul-
tiple cisterns with pumps and filtration. Stored water can be used for non-potable purposes such as irri-
gating gardens or even flushing toilets.
Types of Rainwater Harvesting Systems:
There are two main types of rainwater harvesting systems that vary in complexity, volume of water
stored and permitting requirements. In order to know which system is right for you, you need to deter-
mine your irrigation needs including yard size, soil type, groundwater level, current rainfall and your
budget. The easiest, most low-tech system is a rain barrel attached to your downspout that has a spigot
and hose out to your garden.
Rain Barrel (Less than 100 gallons —no permit required) A rain barrel system is a sim-
ple rainwater collector that captures and stores a portion of the runoff from a roof down-
spout. A hose attached to the bottom of the rain barrel can be used to irrigate your garden.
A rain barrel will only capture a small fraction of the rainwater that flows off your roof, the
rest of the runoff will still need to drain to a safe overflow location. See more information on
page 6.
Cisterns (Greater than 100 gallons) Cisterns are larger systems that can hold much more
water and may include pumps to move the rainwater to the garden. More complex systems
can involve plumbing and electrical work, soil excavation or other structural work. For rain-
water collection projects of this scale, consult a professional to review design, construction
and safety considerations. Permits and zoning certificates are required for cistern systems.
For a complete list of requirements for cistern systems, see the City of Berkeley’s
website at: www.cityofberkeley.info/planning
Permitting Requirements:
System Type Plumbing Electrical Building
Zoning Requirements
Permit Permit Permit
Rain Barrel (<100 gallons) No No No None
Cistern (<360 gallons) Yes No No Requires zoning certificate
Cisterns (>360 gallons)* Yes No Yes Requires zoning certificate
Cisterns >5000 gallons & >2:1 Cisterns on or above
height to width OR Cisterns grade require zoning cer-
Yes No Yes
above grade (raised) OR be- tificate (none required for
low grade (underground)* underground cisterns)
Cisterns within a building Yes No No None
Pumps added to any system Yes
*Engineered drawings and calculations may be needed for anchoring of cisterns, seismic loading and, anticipated loading, de-
pending on placement, seismic design category and size of cistern on a case by case basis.
4

7. Residential Rainwater Harvesting Systems
The California Plumbing Code has no approved standards for rainwater har-
vesting systems. Rainwater catchment systems over 100 gallons require permits
and approval from the City of Berkeley Building Department. In order to get a permit
for a cistern (over 100 gallons), applicants must submit a plan that meets or exceeds require-
ments for heath and safety. An Alternative Methods and Materials Request (AMMR Form)
must accompany the permit application. Use ARCSA/ASPE standards to help design your
system (see resources page 10).
Untreated rainwater
Exterior Subsurface Irrigation- Rainwater can be used to water all your outdoor
plants– including edible plants and gardens. Consider using a first-flush device that
diverts the first inch of rain which may contain contaminants from roof for use in edible
gardens. Untreated rainwater from permitted systems must be used sub-surface. Infor-
mation about irrigation can be found in the distribution section on page 7 & 8.
Treated rainwater
Exterior and Interior Nonpotable Uses– Treated rainwater can be used outside for
activities such as above surface irrigation and car washing or indoors for toilet flushing
and laundry, subject to environmental health review. For rainwater treatment standards,
see: www.cityofberkeley.info/planning
To ensure health and safety, all rainwater systems must be:
Labeled non-potable
Discharging overflow to a safe location Rainwater cannot be used as
Stored in a structurally sound cistern or barrel drinking water in Berkeley.
Screened to prevent mosquito breeding
Secured to ensure all child safety precautions are taken to prevent drowning
Cleaned annually with a non-toxic cleaner such as vinegar
For a complete list of City of Berkeley Rain Harvesting Permit Requirements, please see
the website at: www.cityofberkeley.info/planning
Sample Rainwater Harvesting System:
System Size:
To Gutter The size of your system depends on
how big your roof is, how much rain-
water storage you have, and how you
Screened Gutter system intend to use the water.
Overflow A rough rule of thumb is that you can
collect 600 gallons of water for every
First Flush Device 1,000 sq.ft of roof area for every inch
and Drain of rain.
250 Gallon Cistern
To Irrigation
5

8. Rainwater Harvesting System: Rain barrels
No permit or city approval is needed for rain barrel systems of 100 gallons
or less per vessel, provided the following requirements are met:
Requirements:
Rain barrels shall be sited at grade on a sound and level surface at or near gutter
downspouts.
Water collected shall be used for irrigation only.
Rain barrel openings shall be screened with a fine mesh (.05 inch x .05 inch) to pre-
vent mosquitoes from entering.
Gutters serving rain barrels shall be debris screened.
Large openings shall be securely fastened to prevent accidental drowning.
No pumps, connections to domestic water or interior use are permitted.
Rain barrels shall be located a minimum of 3 feet from the property line.
Overflow or discharge from rain barrels may not discharge across the public right-of-
way or adjacent property, or in any way create a nuisance.
Collection vessel(s) for each existing downspout shall not exceed 100 gallons in the
aggregate.
Rain barrels and gutters shall be cleaned annually.
Rainwater from rain barrels is not required to be treated.
Use of rainwater collected from rain barrels is not limited to sub-surface irrigation.
Note: Rain catchment systems over 100 gallons or over 100 gallons in aggregate per
downspout will be considered cisterns subject to the permitting requirements.
Sample Rain Barrel System Drawing:
Your rain barrel should have a spigot/faucet so
that you can access the water, an overflow pipe,
a sealed and screened lid with an opening to
attach your downspout and screens on all vents.
Label all rainwater harvesting pipes and barrels
with: ―Non-Potable Water, Do NOT Drink‖.
Non-Potable All rainwater collection systems must have an
Water, Do overflow to a safe disposal location (stormwater
NOT Drink! drain or rain garden).
If you intend to water edible plants with your
rainwater, consider installing a first flush di-
verter, which disposes of the first inch of rain
and ensures that you harvest only the cleanest
rainwater.
Rain barrel must be secured on a firm, level sur-
face so that it will not tip over. It can be raised
slightly to help with gravity flow irrigation.
The barrel should be a food grade container,
made to hold liquid.
Drawing Credit: City of Ottawa, Canada
6

9. Distribution Methods for Residential Graywater and Rainwater
Although rainwater and graywater systems are different and have distinct character-
istics and permitting requirements, they have similar distribution methods and allow-
able uses.
Two beneficial ways to use graywater and rainwater:
Irrigation- Replaces drinking water for watering plants and lawn
Disposal- Diverts water from sewer or storm drain to recharge ground water
Irrigation: Sub-surface irrigation takes place below the soil surface or in a mulch bed. Sub-
surface irrigation is used to minimize human contact with possible harmful contaminants.
Sprinklers and surface watering cannot be used with alternate water sources unless the water
has been treated to an approved level of disinfection.
A good rule-of-thumb is that a
Types of Irrigation Systems: square foot of well-drained soil
can handle about a half gallon of
Mulch Basin– simplest method of irrigation graywater per week.
Sub-Surface Plant Drip System– more complex system
Sub-Surface Irrigation for Lawns– more complex design and venting requirements
Sample Irrigation Systems Drawings:
Mulch Basins are trenches located be-
tween or around plants filled with mulch de-
signed to prevent ponding or surfacing.
Inverted The diagram (to the left) illustrates a branched
Pot
subsurface irrigation system that waters plants
without the use of specialized drip emitters,
using tubing for controlled saturation at the
roots. Pots are located below the surface of
the system to provide air pockets around the
tubing to prevent root intrusion. This system is
less prone to clogging, but requires more vol-
ume for even distribution.
Sub-Surface Plant Drip System
directly irrigates plants at the root system
at a regulated low volume. Sub-surface
drip emitters must be designed to resist
root infiltration and generally require a
pump and filter. (See diagram to right)
PVC Manifold Sub-Surface Irrigation for Lawns is
a designed assembly that is located below
the sod that evenly distributes the alternate
water sources and ensures that water does
not reach the surface. With no surface wet-
ting this type of irrigation allows for activities
on the lawn without direct exposure to the
graywater. This system requires sub-
Sub-surface distribution Emitter surface drip emitters designed to resist root
Tubing
pattern infiltration, a properly sized filter and may
also require a pump. (See diagram to left)
7

10. Distribution Methods for Residential Graywater and Rainwater
Disposal: Disposal fields help recharge the groundwater system and reduce the
load on the waste water treatment system and the San Francisco Bay.
Disposal and Irrigation Tips for Success:
Distribute graywater and rainwater away from your building foundation to a
flat, sub-surface garden area, avoid steep slopes to prevent runoff and
erosion.
Apply thick compost mulches for sub-surface irrigation. The mulch will speed
up the natural decomposition of waste residues and help prevent runoff.
Rotate applications of graywater with rainwater or fresh water to avoid high
concentrations of salt build-up in the soil.
Ongoing maintenance is required for all distributions systems. Maintenance
may include regularly replacing mulch and maintaining drip emitters free of
root intrusion.
Sample Disposal Field Drawing:
Illustration to the right
shows a graywater disposal
field– a similar system can
be used for rainwater dis-
posal.
Disposal fields must be 5
feet from property lines and
buildings, and 100 feet from
streams.
Diagram Credit: State of California Graywater Guide 1995
Piping to disposal field shall be solid pipe
sloping 1/4‖per foot to the point of connec-
tion to the leach field. Minimum 3‖ perforated
pipe is required for disposal fields. Perfo-
12”min rated pipe shall be installed level. Filter ma-
terial and aggregates from 3/4 to 2 1/2‖shall
be placed in the trench. Aggregate can be
clean stone, gravel, slag or similar materials.
Leach lines can be up to 100’ long and
spaced as close as 4’ apart.
8

11. Glossary of Terms for Graywater and Rainwater Systems
3-Way Valves: diverts graywater from sewer to distribution plumbing or as a shut-off back to sewer.
Blackwater: toilet water that can not be re-used.
Cistern: a storage device for rainwater harvesting system that holds and stores over 100 gallons. Cis-
terns can be installed above or below ground, depending on site conditions.
Combined Pump, Surge Tank & Filter Assembly: a manufactured unit such as ―Aqua2use‖.
Complex System: graywater systems that discharge over 250 gallons per day.
Disposal Field: a landscape designed to absorb the graywater or rainwater to prevent ponding or run-
off.
Distribution System: piping that carries graywater or rainwater out to the desired landscape for irriga-
tion or disposal.
Downspout: the rain leader from the roof gutter to the rainwater storage vessel or other approved loca-
tion as provided in the 2007 California Plumbing Code Section 1101.1.
Filter: used to protect drip irrigation from fine particles and clogging of emitters.
Graywater Sources: washing machine, bath/shower, sink (not kitchen sink).
Gutter Screens: to keep debris out of the rain gutters or entering your system.
Holding Tank: temporarily stores graywater until there is sufficient volume to pump.
Irrigation Field & System: the landscape intended to be irrigated by graywater or rainwater, including
via a drip irrigation system, mulch basin, or other approved irrigation method.
Labeling: Piping and hose bibs must be labeled with yellow background and black lettering: ―CAUTION:
NONPOTABLE WATER, DO NOT DRINK‖.
Mulch: organic waste material (leaves, prunings, straw, wood chips, etc). Mulch is permeable and al-
lows rapid infiltration of graywater or rainwater into soil.
Mulch Basin: a type of irrigation or disposal field filled with mulch used to prevent ponding or runoff. A
mulch basin may include a basin around a tree, a trough along a row of plants.
Operation Manual: for instruction on function, maintenance and safety precautions.
Piping: directs the water to your irrigation system.
Pump: pressurizes water through distribution system out to landscape (optional– can be gravity fed).
Rain Barrels: collection devices that hold and store 100 gallons or less of rainwater. Capture flow di-
rectly from downspout.
Roof washers & First-Flush Devices: reduces contaminants in the harvested rainwater.
Simple System: a graywater system with discharge of 250 gallons per day or less. Simple systems
exceed complexity of clothes washer system and require permits.
Sub-Surface Drip or Irrigation Systems: piping that carries graywater or rainwater out to landscape to
be irrigated. Can include drip emitters, mulch basins, etc.
Surge Tank: delays distribution of water by temporarily holding back large drain flows.
Treated Rainwater: rainwater that is treated to meet health and safety requirements. Can include pre-
filtration (first-flush), cartridge filtration and disinfection and chlorination. Treated rainwater is re-
quired for certain uses including toilet flushing, laundry, car washing, or sprinklers.
Vent: vertical piping that allows sewer gasses to safely release to the atmosphere.
Office of Energy and Sustainable Development (OESD)
A Division of the Planning Department
2120 Milvia Street, Berkeley CA 94704
Phone: 510-981-7410
Email: planning@cityofberkeley.info
9

12. Resources for Graywater and Rainwater Systems
City of Berkeley Resources:
City of Berkeley General Information, Customer Service Center:
Dial 3-1-1 within Berkeley or 510-981-CITY
Office of Energy and Sustainable Development
www.cityofberkeley.info/sustainable
Senior Green Building Inspector: 510-981-7457
Email:rrushing@cityofberkeley.info
Permit Service Center
2120 Milvia Street, Berkeley CA 94704
www.cityofberkeley.info/planning
General Information: 510-981-7500
Faxed Permit Applications: 510-981-7505
Appointment Scheduling: 510-981-7502
Land Use Planning (Zoning)
www.cityofberkeley.info/planning
Zoning: 510-981-7410
Building & Safety
www.cityofberkeley.info/planning
General Information: 510-981-7440
Inspection Request Line: 510-981-7444
Email: buildingandsafety@cityofberkeley.info
Public Works
www.cityofberkeley.info/pw
Stormwater: 510-981-6394
Sewer Laterals: 510-981-6423
Refuse & Recycling: 510-981-7270
Additional Resources:
Codes and Guidelines:
California Plumbing Code for Graywater Chapter 16A:
www.hcd.ca.gov/codes/shl/2007CPC_Graywater_Complete_2-2-10.pdf
California Department of Water Resources: www.water.ca.gov/wateruseefficiency
City of Berkeley Guidelines for Rainwater: www.cityofberkeley.info/planning
Rebates:
East Bay Municipal Utility District (EBMUD): www.ebmud.com
How to Guides:
Oasis Design: www.oasisdesign.net/greywater
Greywater Alliance: www.greywateralliance.org
ARCSA/ASPE Rainwater Catchment Design and Installation Standards:
http//www.arcsa.org/rainwater-10-09
StopWaste Bay Friendly Gardening: www.stopwaste.org
10