The document provides instructions for assembling and disassembling components of the creeper transmission and range transmission for Deere tractors. It includes details on installing snap rings, gears, bearings, and other parts. Specifications are also provided for measurements and torque values.
John deere 6200 l tractors service repair technical manual (tm4523)ufjjdjkkskemmd
The document provides instructions for assembling and repairing the creeper transmission for tm4523 tractors. It details installing components like connecting rings, snap rings, gears, bearings, and shift collars. Specifications are provided for measurements and torque values. The final section covers general repair procedures for the range transmission, emphasizing cleanliness and care when handling precision machined parts.
Kubota oc60 e2 (-x) diesel engine service repair manualfhsejkdkmem
This document provides specifications and dimensions for OC60-E2 and OC95-E2 diesel engines. It includes details on the engine models, displacement, power output, engine speeds, fuel system components, lubrication system, dimensions, performance curves and maintenance procedures. The specifications cover technical details such as bore size, stroke, compression ratio, injection timing and pressure. Dimension diagrams show the physical layout of the engine blocks and components. Performance curves illustrate power, torque, fuel consumption and emissions characteristics over engine speeds. Maintenance instructions outline daily checks and service intervals for items such as filters, oil changes and engine overhauls.
John deere se6100 tractors service repair technical manual (tm4493)ujjjjfkksekmmdm
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
John deere 6200 tractors service repair technical manual (tm4493)fujjsefksekmem
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
John deere se6300 tractors service repair technical manual (tm4493)ufjjsejfkskemme
This document provides instructions for adjusting the cone point on differentials for 6100 to 6600 tractors. It involves measuring specific dimensions, calculating the required spacer washer thickness, and selecting the appropriate washers. The final section lists some special tools needed for tasks like tilting the cab, supporting the tractor during wheel removal, and removing/installing shafts.
John deere se6300 tractors service repair technical manual (tm4493)fjkskekxsdcmdmme
This document provides instructions for adjusting the cone point on differentials for 6100 to 6600 tractors. It involves measuring specific dimensions, calculating the required spacer washer thickness, and selecting the appropriate washers. The final section lists some special tools needed for tasks like tilting the cab, supporting the tractor during wheel removal, and removing/installing shafts.
John deere 6100 tractors service repair technical manual (tm4493)fujjsefksekmem
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
John deere 6506 tractors service repair technical manual (tm4493)fjjskdmnenemm
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
John deere 6200 l tractors service repair technical manual (tm4523)ufjjdjkkskemmd
The document provides instructions for assembling and repairing the creeper transmission for tm4523 tractors. It details installing components like connecting rings, snap rings, gears, bearings, and shift collars. Specifications are provided for measurements and torque values. The final section covers general repair procedures for the range transmission, emphasizing cleanliness and care when handling precision machined parts.
Kubota oc60 e2 (-x) diesel engine service repair manualfhsejkdkmem
This document provides specifications and dimensions for OC60-E2 and OC95-E2 diesel engines. It includes details on the engine models, displacement, power output, engine speeds, fuel system components, lubrication system, dimensions, performance curves and maintenance procedures. The specifications cover technical details such as bore size, stroke, compression ratio, injection timing and pressure. Dimension diagrams show the physical layout of the engine blocks and components. Performance curves illustrate power, torque, fuel consumption and emissions characteristics over engine speeds. Maintenance instructions outline daily checks and service intervals for items such as filters, oil changes and engine overhauls.
John deere se6100 tractors service repair technical manual (tm4493)ujjjjfkksekmmdm
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
John deere 6200 tractors service repair technical manual (tm4493)fujjsefksekmem
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
John deere se6300 tractors service repair technical manual (tm4493)ufjjsejfkskemme
This document provides instructions for adjusting the cone point on differentials for 6100 to 6600 tractors. It involves measuring specific dimensions, calculating the required spacer washer thickness, and selecting the appropriate washers. The final section lists some special tools needed for tasks like tilting the cab, supporting the tractor during wheel removal, and removing/installing shafts.
John deere se6300 tractors service repair technical manual (tm4493)fjkskekxsdcmdmme
This document provides instructions for adjusting the cone point on differentials for 6100 to 6600 tractors. It involves measuring specific dimensions, calculating the required spacer washer thickness, and selecting the appropriate washers. The final section lists some special tools needed for tasks like tilting the cab, supporting the tractor during wheel removal, and removing/installing shafts.
John deere 6100 tractors service repair technical manual (tm4493)fujjsefksekmem
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
John deere 6506 tractors service repair technical manual (tm4493)fjjskdmnenemm
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
Mc cormick gx series tier 1 (2002 2004) - rp80 - gx45 gxh45 tractor service ...fjjsekmsmmes
This document provides parts information for components of an engine assembly, including cylinders, pistons, rods, bearings, gaskets, plugs, bolts, and other parts. Each part lists the part number, quantity needed, replacement time in hours, and other identifying information. The document contains illustrations of engine components and refers the user to other pages for additional information.
Mc cormick g max iveco tier 3 (2007-2012) - rp74 - 135 tractor service repair...fjjsekmsmmes
This document provides exploded diagrams and part lists for an engine. It includes diagrams and lists of parts for the crankcase, crankshaft, pistons, connecting rods, cylinder head, valves, camshaft, fuel system components, and other engine systems. Each component lists the part number, description, and quantity or size as needed. Reference numbers link between diagrams and callouts for assembly.
Mc cormick g max iveco tier 3 (2007-2012) - rp74 - 125 tractor service repair...fjjsekmsmmes
This document provides parts information for an engine, including:
1. Images and part numbers for engine components
2. References to component pages for additional information
3. Notes on replacement parts and quantities typically included with tractor sales
Mc cormick gm series tier 2 (2003 2008) - rs11 - gm45 tractor service repair ...fjjsekmsmmes
This document provides a parts list and assembly details for engine components of GM Series Tier 2 tractors from 2003-2008. It includes over 50 individual part numbers with descriptions of engine parts like pistons, rods, bearings, gaskets, plugs, bolts and other hardware. Additional information provided includes replacement part designations, quantity of parts per assembly, and references to other documents.
Mc cormick gm series tier 1 (1998 2003) - rs10 - gm50 tractor service repair ...fjjsekmsmmes
This document contains parts listings and technical specifications for components of agricultural tractors. It includes items like blocks, gaskets, studs, plugs, bolts, rings, kits, shafts, gears, conrods, bearings, pistons, crowns, valves, springs, guides, covers, bushes, pulleys, flywheels and other engine parts. Each part lists the part number, quantity needed, fitting time and whether it is for replacement, overhaul or comes in over/under-sized variants. It also notes the tractor models and years the parts are for.
Mc cormick gm series tier 1 (1998 2003) - rs10 - gm40 tractor service repair ...fjjsekmsmmes
This document contains parts information for various engine components. It includes the part number, description, quantity needed and application (such as tractor model). Each part listed also includes information on replacement part options and specifications. The document contains repetitive information on common replacement parts and specifies this is for components of an engine assembly. It provides detailed technical specifications and diagrams for overhaul and replacement of engine parts.
Mc cormick fxl tier 2 (2003 2008) - rp51 - f70 fge tractor service repair manualfjjsekmsmmes
This document contains a list of components with associated part numbers. It includes information about tasks performed on different components, including replacements and overhauls on engines T-A and T-B. Various gaskets, plugs, valves, rings, and other individual parts are also listed with details like quantity and reference numbers. The document provides information on maintenance and repair of engine components.
Mc cormick fxl tier 2 (2003 2008) - rp51 - f60 fge tractor service repair manualfjjsekmsmmes
This document contains a list of components for engines made by McCormick. It includes identification numbers, part names, quantities and other technical specifications for items related to engines including cylinders, shafts, gears, plates, seals and other engine parts. Locations and repair kit information is also provided to help identify replacement parts for different tractor models.
Komatsu pw160 7 k hydraulic excavator service repair manual (sn k40001 and up)fjjsekmsmmes
This document provides instructions for removing and installing the cylinder head assembly of a Komatsu PW160-7K excavator. The key steps include draining coolant, disconnecting various hoses and electrical connections, removing the air conditioning compressor, fuel filter, exhaust manifold, alternator and other components to access the cylinder head. The nozzle holder assemblies and rocker arm assemblies are then removed to allow lifting off the cylinder head. Reinstallation follows the reverse order.
Komatsu pw140 7 hydraulic excavator service repair manual (sn h55051 and up)fjjsekmsmmes
This shop manual provides information for servicing and repair of the Komatsu PW140-7 wheel loader. It includes sections on safety, general machine information, structure and maintenance standards, testing and troubleshooting procedures, disassembly and assembly instructions, and other technical details. The manual covers serial number H55051 and up, which uses the SAA4D107E-1 engine. Refer to the 107 Series Engine Shop Manual for engine-specific maintenance.
Komatsu pc1800 6 hydraulic excavator service repair manual (sn 10002 and up)fjjsekmsmmes
This shop manual provides instructions for repairing and maintaining a Komatsu PC1800-6 excavator. It contains sections on general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other technical specifications. Safety precautions are marked throughout to indicate important safety notices during repair work. The manual is divided into chapters and pages to help technicians easily access the information needed to service different components.
This shop manual provides technical information for servicing a Komatsu PC400LC-7L hydraulic excavator. It includes specifications, component weights, fuel and fluid specifications, and safety procedures. The manual is divided into sections covering general information, structure and function, testing and troubleshooting, disassembly and assembly, and maintenance standards. It is intended to help technicians accurately service the excavator by explaining correct repair procedures.
Komatsu pc250 lc 6 hydraulic excavator service repair manual sna82001 and upfjjsekmsmmes
This document provides specifications for Komatsu hydraulic excavators models PC200-6, PC200LC-6, including dimensions, weights, performance capabilities, and other technical details. Key specifications listed include a 0.8 m3 bucket capacity, operating weights of 19,900kg and 21,300kg, maximum digging depths of 6,620mm, maximum digging reaches of 9,875mm, and maximum digging forces of 111.7kN (PC200-6). Technical details such as travel speeds, ground pressures, track dimensions, and more are also provided.
Komatsu pc220 lc 6 hydraulic excavator service repair manual sn a82001 and upfjjsekmsmmes
This document provides specifications for Komatsu hydraulic excavators models PC200-6, PC200LC-6, including dimensions, weights, performance capabilities, and other technical details. Key specifications listed include a 0.8 m3 bucket capacity, operating weights of 19,900kg and 21,300kg, maximum digging depths of 6,620mm, maximum digging reaches of 9,875mm, and maximum digging forces of 111.7kN (PC200-6). Technical details such as travel speeds, ground pressures, track dimensions, and more are also provided.
Komatsu pc210 lc 6 hydraulic excavator service repair manual sna82001 and upfjjsekmsmmes
This document provides specifications for Komatsu hydraulic excavators models PC200-6, PC200LC-6, including dimensions, weights, performance capabilities, and other technical details. Key specifications listed include a 0.8 m3 bucket capacity, operating weights of 19,900kg and 21,300kg, maximum digging depths of 6,620mm, maximum digging reaches of 9,875mm, and maximum digging forces of 111.7kN (PC200-6). Technical details such as travel speeds, ground pressures, track dimensions, and more are also provided.
Komatsu pc200 lc 6 hydraulic excavator service repair manual sna82001 and upfjjsekmsmmes
This document provides specifications for Komatsu hydraulic excavators models PC200-6, PC200LC-6, including dimensions, weights, performance capabilities, and other technical details. Key specifications listed include a 0.8 m3 bucket capacity, operating weights of 19,900kg and 21,300kg, maximum digging depths of 6,620mm, maximum digging reaches of 9,875mm, and maximum digging forces of 111.7kN (PC200-6). Technical details such as travel speeds, ground pressures, track dimensions, and more are also provided.
Komatsu pc200 6 hydraulic excavator service repair manual sn a82001 and upfjjsekmsmmes
This document provides specifications for Komatsu hydraulic excavators models PC200-6, PC200LC-6, including dimensions, weights, performance capabilities, and other technical details. Key specifications listed include a 0.8 m3 bucket capacity, operating weights of 19,900kg and 21,300kg, maximum digging depths of 6,620mm, maximum digging reaches of 9,875mm, and maximum digging forces of 111.7kN (PC200-6). Technical details such as travel speeds, ground pressures, heights, lengths, and more are provided for each excavator model.
John deere 8235 r tractors service repair technical manual (tm110319)fjjsekmsmmes
This document provides instructions for removing a transmission from several tractor models. It outlines over 80 steps to disconnect lines, brackets, wiring and other components to separate the transmission from the engine and mid-frame. Precise installation of a splitting stand and lifting fixture are described to safely support the tractor during disassembly.
John deere 6600 tractors service repair technical manual (tm4493)fjjsekmsmmes
1. The document provides instructions for adjusting the cone point on tractors from models 6100 to 6600. It involves measuring specific dimensions, calculating the required spacer washer thickness, and selecting the appropriate washers.
2. The instructions also provide details on assembling the transmission, including pressing in bearings, installing gears and synchronizers, and checking gear backlash.
3. Special tools required for tasks like tilting the cab, supporting the tractor, and removing PTO components are also listed.
John deere 6506 tractors service repair technical manual (tm4493)fjjsekmsmmes
1. The document provides instructions for adjusting the cone point on tractors from models 6100 to 6600. It involves measuring specific dimensions, calculating the required spacer washer thickness, and selecting the appropriate washers.
2. The instructions also provide details on assembling the transmission, including pressing in bearings, installing gears and synchronizers, and checking gear backlash.
3. Special tools required for tasks like tilting the cab, supporting the tractor, and removing PTO components are also listed.
Mc cormick gx series tier 1 (2002 2004) - rp80 - gx45 gxh45 tractor service ...fjjsekmsmmes
This document provides parts information for components of an engine assembly, including cylinders, pistons, rods, bearings, gaskets, plugs, bolts, and other parts. Each part lists the part number, quantity needed, replacement time in hours, and other identifying information. The document contains illustrations of engine components and refers the user to other pages for additional information.
Mc cormick g max iveco tier 3 (2007-2012) - rp74 - 135 tractor service repair...fjjsekmsmmes
This document provides exploded diagrams and part lists for an engine. It includes diagrams and lists of parts for the crankcase, crankshaft, pistons, connecting rods, cylinder head, valves, camshaft, fuel system components, and other engine systems. Each component lists the part number, description, and quantity or size as needed. Reference numbers link between diagrams and callouts for assembly.
Mc cormick g max iveco tier 3 (2007-2012) - rp74 - 125 tractor service repair...fjjsekmsmmes
This document provides parts information for an engine, including:
1. Images and part numbers for engine components
2. References to component pages for additional information
3. Notes on replacement parts and quantities typically included with tractor sales
Mc cormick gm series tier 2 (2003 2008) - rs11 - gm45 tractor service repair ...fjjsekmsmmes
This document provides a parts list and assembly details for engine components of GM Series Tier 2 tractors from 2003-2008. It includes over 50 individual part numbers with descriptions of engine parts like pistons, rods, bearings, gaskets, plugs, bolts and other hardware. Additional information provided includes replacement part designations, quantity of parts per assembly, and references to other documents.
Mc cormick gm series tier 1 (1998 2003) - rs10 - gm50 tractor service repair ...fjjsekmsmmes
This document contains parts listings and technical specifications for components of agricultural tractors. It includes items like blocks, gaskets, studs, plugs, bolts, rings, kits, shafts, gears, conrods, bearings, pistons, crowns, valves, springs, guides, covers, bushes, pulleys, flywheels and other engine parts. Each part lists the part number, quantity needed, fitting time and whether it is for replacement, overhaul or comes in over/under-sized variants. It also notes the tractor models and years the parts are for.
Mc cormick gm series tier 1 (1998 2003) - rs10 - gm40 tractor service repair ...fjjsekmsmmes
This document contains parts information for various engine components. It includes the part number, description, quantity needed and application (such as tractor model). Each part listed also includes information on replacement part options and specifications. The document contains repetitive information on common replacement parts and specifies this is for components of an engine assembly. It provides detailed technical specifications and diagrams for overhaul and replacement of engine parts.
Mc cormick fxl tier 2 (2003 2008) - rp51 - f70 fge tractor service repair manualfjjsekmsmmes
This document contains a list of components with associated part numbers. It includes information about tasks performed on different components, including replacements and overhauls on engines T-A and T-B. Various gaskets, plugs, valves, rings, and other individual parts are also listed with details like quantity and reference numbers. The document provides information on maintenance and repair of engine components.
Mc cormick fxl tier 2 (2003 2008) - rp51 - f60 fge tractor service repair manualfjjsekmsmmes
This document contains a list of components for engines made by McCormick. It includes identification numbers, part names, quantities and other technical specifications for items related to engines including cylinders, shafts, gears, plates, seals and other engine parts. Locations and repair kit information is also provided to help identify replacement parts for different tractor models.
Komatsu pw160 7 k hydraulic excavator service repair manual (sn k40001 and up)fjjsekmsmmes
This document provides instructions for removing and installing the cylinder head assembly of a Komatsu PW160-7K excavator. The key steps include draining coolant, disconnecting various hoses and electrical connections, removing the air conditioning compressor, fuel filter, exhaust manifold, alternator and other components to access the cylinder head. The nozzle holder assemblies and rocker arm assemblies are then removed to allow lifting off the cylinder head. Reinstallation follows the reverse order.
Komatsu pw140 7 hydraulic excavator service repair manual (sn h55051 and up)fjjsekmsmmes
This shop manual provides information for servicing and repair of the Komatsu PW140-7 wheel loader. It includes sections on safety, general machine information, structure and maintenance standards, testing and troubleshooting procedures, disassembly and assembly instructions, and other technical details. The manual covers serial number H55051 and up, which uses the SAA4D107E-1 engine. Refer to the 107 Series Engine Shop Manual for engine-specific maintenance.
Komatsu pc1800 6 hydraulic excavator service repair manual (sn 10002 and up)fjjsekmsmmes
This shop manual provides instructions for repairing and maintaining a Komatsu PC1800-6 excavator. It contains sections on general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other technical specifications. Safety precautions are marked throughout to indicate important safety notices during repair work. The manual is divided into chapters and pages to help technicians easily access the information needed to service different components.
This shop manual provides technical information for servicing a Komatsu PC400LC-7L hydraulic excavator. It includes specifications, component weights, fuel and fluid specifications, and safety procedures. The manual is divided into sections covering general information, structure and function, testing and troubleshooting, disassembly and assembly, and maintenance standards. It is intended to help technicians accurately service the excavator by explaining correct repair procedures.
Komatsu pc250 lc 6 hydraulic excavator service repair manual sna82001 and upfjjsekmsmmes
This document provides specifications for Komatsu hydraulic excavators models PC200-6, PC200LC-6, including dimensions, weights, performance capabilities, and other technical details. Key specifications listed include a 0.8 m3 bucket capacity, operating weights of 19,900kg and 21,300kg, maximum digging depths of 6,620mm, maximum digging reaches of 9,875mm, and maximum digging forces of 111.7kN (PC200-6). Technical details such as travel speeds, ground pressures, track dimensions, and more are also provided.
Komatsu pc220 lc 6 hydraulic excavator service repair manual sn a82001 and upfjjsekmsmmes
This document provides specifications for Komatsu hydraulic excavators models PC200-6, PC200LC-6, including dimensions, weights, performance capabilities, and other technical details. Key specifications listed include a 0.8 m3 bucket capacity, operating weights of 19,900kg and 21,300kg, maximum digging depths of 6,620mm, maximum digging reaches of 9,875mm, and maximum digging forces of 111.7kN (PC200-6). Technical details such as travel speeds, ground pressures, track dimensions, and more are also provided.
Komatsu pc210 lc 6 hydraulic excavator service repair manual sna82001 and upfjjsekmsmmes
This document provides specifications for Komatsu hydraulic excavators models PC200-6, PC200LC-6, including dimensions, weights, performance capabilities, and other technical details. Key specifications listed include a 0.8 m3 bucket capacity, operating weights of 19,900kg and 21,300kg, maximum digging depths of 6,620mm, maximum digging reaches of 9,875mm, and maximum digging forces of 111.7kN (PC200-6). Technical details such as travel speeds, ground pressures, track dimensions, and more are also provided.
Komatsu pc200 lc 6 hydraulic excavator service repair manual sna82001 and upfjjsekmsmmes
This document provides specifications for Komatsu hydraulic excavators models PC200-6, PC200LC-6, including dimensions, weights, performance capabilities, and other technical details. Key specifications listed include a 0.8 m3 bucket capacity, operating weights of 19,900kg and 21,300kg, maximum digging depths of 6,620mm, maximum digging reaches of 9,875mm, and maximum digging forces of 111.7kN (PC200-6). Technical details such as travel speeds, ground pressures, track dimensions, and more are also provided.
Komatsu pc200 6 hydraulic excavator service repair manual sn a82001 and upfjjsekmsmmes
This document provides specifications for Komatsu hydraulic excavators models PC200-6, PC200LC-6, including dimensions, weights, performance capabilities, and other technical details. Key specifications listed include a 0.8 m3 bucket capacity, operating weights of 19,900kg and 21,300kg, maximum digging depths of 6,620mm, maximum digging reaches of 9,875mm, and maximum digging forces of 111.7kN (PC200-6). Technical details such as travel speeds, ground pressures, heights, lengths, and more are provided for each excavator model.
John deere 8235 r tractors service repair technical manual (tm110319)fjjsekmsmmes
This document provides instructions for removing a transmission from several tractor models. It outlines over 80 steps to disconnect lines, brackets, wiring and other components to separate the transmission from the engine and mid-frame. Precise installation of a splitting stand and lifting fixture are described to safely support the tractor during disassembly.
John deere 6600 tractors service repair technical manual (tm4493)fjjsekmsmmes
1. The document provides instructions for adjusting the cone point on tractors from models 6100 to 6600. It involves measuring specific dimensions, calculating the required spacer washer thickness, and selecting the appropriate washers.
2. The instructions also provide details on assembling the transmission, including pressing in bearings, installing gears and synchronizers, and checking gear backlash.
3. Special tools required for tasks like tilting the cab, supporting the tractor, and removing PTO components are also listed.
John deere 6506 tractors service repair technical manual (tm4493)fjjsekmsmmes
1. The document provides instructions for adjusting the cone point on tractors from models 6100 to 6600. It involves measuring specific dimensions, calculating the required spacer washer thickness, and selecting the appropriate washers.
2. The instructions also provide details on assembling the transmission, including pressing in bearings, installing gears and synchronizers, and checking gear backlash.
3. Special tools required for tasks like tilting the cab, supporting the tractor, and removing PTO components are also listed.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
John deere 6300 tractors service repair technical manual (tm4523)
1. tm4523 - 6200, 6200L, 6300, 6300L,6400, 6400L, 6500, 6500L Tractors
Assembling the Creeper Transmission
Assembling the Creeper Transmission
LX004145-UN: Creeper Transmission
Install connecting ring (A) on drive shaft.
Install snap ring (B).
NOTE:
Connecting ring axial play must be less than 0.1 mm (0.004 in.).
-: Snap Ring Thickness
LX008833-UN: Needle Bearing & Thrust Washers
Install needle bearing (B) with thrust washers.
Install snap ring (A).
Item Measurement Specification
Connecting ring Axial play less than 0.1 mm (0.004 in.)
Thickness of snap rings available
1.45 mm (0.057 in.) 1.65 mm (0.065 in.)
1.55 mm (0.061 in.) 1.75 mm (0.069 in.)
1/5
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
2. LX000220-UN: Gears
Position gear (B) on gear (C).
Install thrust washer (A) and snap ring.
Older tractor series:
LX000221-UN: Shift Collar
LX000222-UN: Install Shift Collar W/Pins
Install shift collar (A).
Before installing shift collar, mark position of bores and splines (see arrows).
Grease pins and install on shift collar.
Install shift collar with pins.
Latest tractor series:
2/5
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
3. LX1016947-UN: Retaining Ring
LX1016948-UN: Pin Installation
Install retaining ring (A) on the shift collar.
Install pins (B).
Install the shift collar and pins.
LX008834-UN: Drive Shaft Gears
Install gears on drive shaft.
NOTE:
3/5
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
4. When installing gears, press shift collar against gears. This prevents the shift collar and pins from falling out.
LX008835-UN: Snap Ring Installation
Install the two axial bearings. Install snap ring (A).
Install lower snap ring of needle bearing.
LX008836-UN: Needle Bearing With Thrust Washers
Install needle bearing (B) with thrust washers.
Install upper snap ring (A).
LX008831-UN: Drive Shaft & Double Gear Ball Bearings
Install ball bearing (B) of drive shaft and ball bearing (A) of double gear.
4/5
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
6. tm4523 - 6200, 6200L, 6300, 6300L,6400, 6400L, 6500, 6500L Tractors
Sectional View of Shift Linkage
Sectional View of Shift Linkage
LX008837-UN: Shift Linkage-Sectional View
LEGEND:
A - Shaft
B - Shifter shaft
C - Shifter fork
D - Locking pin
E - Shifter shaft ranges C and D
Installation instructions
NOTE:
1/2
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
7. Shifter shaft (E) is a component of the range transmission and protrudes into the creeper transmission once the latter is installed.
If necessary, install locking pin (D).
Locking pin (D) must be raised when the creeper transmission is installed so that the housing can be pushed over shifter shaft (F).
LX,5020006853-19-1997/06/01
2/2
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
9. tm4523 - 6200, 6200L, 6300, 6300L,6400, 6400L, 6500, 6500L Tractors
Repairing the Shift Cover
Repairing the Shift Cover
LX014431-UN: Repairing the Shift Cover
LEGEND:
A - Shaft
B - O-ring
C - Cap screw
D - Shift cover
E - Cap screw (7 used)
F - Lever
G - Spring pin (dia. 5 mm; 13/64 in.)
H - Spring pin (dia. 8 mm; 5/16 in.)
I - Dowel pin
J - Gasket
NOTE:
Use an M6 screw to extract dowel pin (I).
1/2
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
10. Drive spring pins (G) into spring pins (H). They must be offset by 180 degrees.
NOTE:
Up to transm. serial no. 115624, lever (F) has only one 6 mm (15/64 in.) dia. spring pin. If necessary,
replace this spring pin with spring pins (G) and (H). This also requires the replacement of shifter shaft
(A) and lever (F).
LX,RDTH002000-19-1996/04/01
2/2
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
11. tm4523 - 6200, 6200L, 6300, 6300L,6400, 6400L, 6500, 6500L Tractors
Final Assembly
Final Assembly
LX000228-UN: Needle Bearing
Install needle bearing (A) of double gear into the range transmission.
NOTE:
When installing the creeper transmission, raise the long locking pin ( see “Sectional View of Shift
Linkage” ) so that the housing can be pushed over the shifter shaft that protrudes out of the range
transmission.
LX002331-UN: Transmission Housing
Install the transmission housing. See Group 00 .
SyncroPlus transmission: Install the gear transmission and PERMA-CLUTCH 2™ . See Group 00 .
PowrQuad transmission: Install the PowrQuad® module. See Section 55, Group 00 .
1/3
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
12. LX008839-UN: Shifter Shaft Lock
LEGEND:
A - Ball
B - Spring
Install shifter shaft lock.
LX008840-UN: Shift Cover
Install shift cover.
Tighten cap screws to 30 N·m (22 lb-ft).
Item Measurement Specification
2/3
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
13. Shift Cover to Transmission
Housing, Cap Screws
Torque 30 N·m (22 lb-ft)
PERMA-CLUTCH 2 is a trademark of Deere & Company.
PowrQuad is a trademark of Deere & Company. LX,RDTH002001-19-1996/04/01
3/3
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
14. tm4523 - 6200, 6200L, 6300, 6300L,6400, 6400L, 6500, 6500L Tractors
Specifications
Specifications
-: Adjusting Cone Point pf Diff. Drive Shaft
NOTE:
In most cases the dimension (a) stamped on bevel gear face is exactly 172,0 mm (6.772 in.).
Item Measurement Specification
Main shaft Axial play less than 0.1 mm (0.004 in.)
Main shaft and ring gear Cone point distance 0.06 mm (0.0024 in.)
Front wheel drive gear Axial play less than 0.1 mm (0.004 in.)
Range gears Axial play 0.15 to 0.60 mm (0.006 to 0.024 in.)
Synchronizer units Axial play less than 0.1 mm (0.004 in.)
Drive shaft Axial play less than 0.1 mm (0.004 in.)
Drive shaft bearing quill to
differential housing, attaching
screws and bolts
Torque 55 N·m (40 lb-ft)
Main shaft bearing quill to
differential housing, cap screws
Torque 55 N·m (40 lb-ft)
Parking lock shifter shaft Clearance 0.25 to 0.60 mm (0.010 to 0.024 in.)
Transmission housing to differential housing, cap screws
Grade 8.8 Torque 90 N·m (65 lb-ft) 120 N·m (90 lb-ft)
Grade 10.9 Torque 120 N·m (90 lb-ft)
Needle bearings in transmission
housing, cap screws
Torque 30 N·m (22 lb-ft)
Threaded pins of shifter forks Torque 40 N·m (30 lb-ft)
Shift cover to transmission housing,
cap screws
Torque 30 N·m (22 lb-ft)
Countersunk screw in differential
drive shaft
Torque 25 N·m (18 lb-ft)
Adjusting Cone Point pf Diff. Drive Shaft
(Determining Spacer Washer Thickness): Example
(a) Dimension stamped on bevel gear face, read.............. 172.0 mm (6.772 in.)
(b) Dimension from needle bearing to bearing quill, measured.............. + 48.1 mm (1.894 in.)
(c) Cone point dimension of differential housing as specified.............. -219.5 mm (8.642 in.)
(d) Required shim thickness.............. = 0.6 mm (0.014 in.)
LX,RDTG000823N-19-1997/06/01
1/1
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
15. tm4523 - 6200, 6200L, 6300, 6300L,6400, 6400L, 6500, 6500L Tractors
General Repair Procedures- Range Transmission
General Repair Procedures- Range Transmission
NOTE:
Before beginning the repair, review the following guidelines. These are provided to emphasize the need for attention to detail and care when servicing the range
transmission.
Thoroughly clean the outside of the housing before commencing disassembly.
Handle parts carefully to prevent nicking or burring machined surfaces.
The repair area should be kept clean, well organized, and supplied with clean lint-free shop cloths.
Inspect before Disassembly
Inspect the range transmission shafts and countershafts before removal. Inspection may make it easier to decide what repairs are required.
Wipe lubricant off the internal components and examine them to determine if there is excessive wear or damage.
Disassembly and Assembly
Many parts and surfaces are precision machined. Careful handling during disassembly, cleaning, inspection and assembly can prevent unnecessary damage.
Lubricate each component part with clean hydraulic oil.
Needle bearings and thrust washers should be lightly coated with petroleum jelly during assembly.
Use new O-rings, seals and gaskets.
Comply with the prescribed specifications (torques, settings).
Cleaning and Inspection
Clean all parts with clean suitable solvent and use moisture-free air to dry parts.
Bearings
Never dry bearings with compressed air. Spinning a bearing without lubrication can damage the bearing.
Clean the bearings with clean solvent, dry thoroughly, and oil before inspection. Inspect bearings for signs of wear or damage.
Inspect thrust washers and thrust surfaces for signs of wear or damage.
Springs
Inspect all springs for wear, damage or distortion.
Shafts
Inspect the shaft bearing surfaces for wear or damage. If excessive wear or damage is detected, replace the shaft and bearings.
Inspect the shafts for wear or damage.
Gears
Inspect the gear teeth for signs of wear or damage.
1/2
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
16. LX000775-UN: Range Transmission
LEGEND:
A - Countershaft of gear transmission
B - Drive shaft
C - Gear of range D
D - Synchronizer unit
E - Gear of range C
F - Gear of range B
G - Gear of range A
H - Front wheel drive gear
I - Differential drive shaft
LX,5025007066-19-1994/06/01
2/2
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
17. tm4523 - 6200, 6200L, 6300, 6300L,6400, 6400L, 6500, 6500L Tractors
Preliminary Work
Preliminary Work
LX009119-UN: Preliminary Work
1. Remove shift cover (A).
2. SyncroPlus transmission: Remove hydraulic clutch and gear transmission, see Group 00 .
PowrQuad transmission: Remove PowrQuad® module , see Group 00 .
3. If equipped, remove creeper transmission, see Group 00 .
4. Remove front wheel drive clutch, see Section 56, Group 10.
5. Remove PTO [ Only necessary when differential drive shaft is to be removed.] , see Section 56, Group 00 .
6. Remove final drives [ Only necessary when differential drive shaft is to be removed.] , see Section 56, Group 00 .
7. Remove differential [ Only necessary when differential drive shaft is to be removed.] , see Section 56, Group 15 .
PowrQuad is a trademark of Deere & Company. LX,5025007010-19-1994/06/01
1/1
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
18. tm4523 - 6200, 6200L, 6300, 6300L,6400, 6400L, 6500, 6500L Tractors
Disassembling Range Transmission
Disassembling Range Transmission
LX009120-UN: Disassembling Range Transmission
Remove cap screws (A).
Remove transmission housing.
LX009121-UN: Spring & Drive Shaft
Disconnect spring (A) and remove drive shaft (B).
1/2
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
19. LX009122-UN: Shift Shafts & Forks
LEGEND:
A - Shifter shaft (ranges A and B)
B - Shifter fork (ranges A and B)
C - Shifter fork (ranges C and D)
D - Shifter shaft (ranges C and D)
Remove shifter shafts and shifter forks.
LX000782-UN: Diff. Drive Shaft Cap Screws
Turn out cap screws (A) and remove differential drive shaft.
LX,RDTG002105-19-1994/06/01
2/2
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
20. tm4523 - 6200, 6200L, 6300, 6300L,6400, 6400L, 6500, 6500L Tractors
Exploded View of Differential Drive Shaft
Exploded View of Differential Drive Shaft
LX1016986-UN: Differential Drive Shaft
LEGEND:
A - Cap screw (5 used)
B - Bracket
C - Differential drive shaft
D - Needle bearing assy.
E - Axial bearing assy.
F - Shim (use as required)
G - Bearing quill
H - Spring (5 used)
I - Snap ring (thickness as required)
J - Spacer [Earlier tractor series]
K - Snap ring
L - Front wheel drive gear
M - Thrust washer (thickness as required)
N - Gear of range A
O - Synchronizer assy.
P - Snap ring (thickness as required)
Q - Gear of range B
R - Washer (up to transm. serial no. 157465)
S - Snap ring (2.0 m; 0.079 in. thick; up to transm. serial no. 57465)
T - Snap ring (3.0 m; 0.118 n. thick; from transm. serial no. 57466)
U - Gear of range C
V - Gear of range D
W - Countersunk screw
X - Needle bearing
Y - Cap screw (1 [Later tractor series] [ Earlier tractor series] used)
LX,RDTG002110N-19-1997/06/01
1/1
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. tm4523 - 6200, 6200L, 6300, 6300L,6400, 6400L, 6500, 6500L Tractors
Exploded View of Drive Shaft and Parking Lock
Exploded View of Drive Shaft and Parking Lock
LX009194-UN: Drive Shaft & Parking Lock
LEGEND:
A - Bearing quill
B - Pin
C - Spring
D - Taper roller bearing cup
E - Taper roller bearing cone
F - Drive shaft
G - Sealing sleeve (older tractors only)
H - Taper roller bearing cone
I - Taper roller bearing cup
J - Snap ring
K - Shaft
L - Hex. socket screw
M - Pin
N - Locking latch
O - Roller
P - Shifter cam
Q - Axial bearing assy.
R - Spacer washer (thickness as required)
S - Bushing
T - Seal ring
U - Spring
V - Lever
LX,RDTG002111-19-1997/06/01
1/1
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
23. tm4523 - 6200, 6200L, 6300, 6300L,6400, 6400L, 6500, 6500L Tractors
Exploded View of Shift Mechanism
Exploded View of Shift Mechanism
LX1017514-UN: Shift Mechanism
LEGEND:
A - Forward/reverse linkage assembly [ PowrQuad transmission]
B - Fwd/rev. shifter shaft [ PowrQuad transmission]
C - Lever [PowrQuad transmission ] [Up to transmission serial no. 156441]
D - Cover [SyncroPlus or PowrQuad transm. with el. reverser control on steering column]
E - Shifter shaft
F - Ball bushing (4 used)
G - Locking pin (2 used)
H - Shifter shaft housing
I - Shifter shaft
J - Shift fork
K - Plastic tips (4 used) (latest tractor series)
L - Spring [If equipped ]
M - Lever [If equipped ]
N - Roller [If equipped ]
O - Lever [If equipped ]
P - Cam [PowrQuad transmission ] [Up to transmission serial no. 173498]
Q - Dowel pin [If equipped ]
R - Fwd/rev. shifter shaft [ PowrQuad transmission] [ Up to transmission serial no. 156441]
S - Lever [PowrQuad transmission ] [Up to transmission serial no. 156441]
T - Lever [PowrQuad transmission ]
U - Lever [PowrQuad transmission ]
V - Pin [PowrQuad transmission ] [Up to transmission serial no. 173498]
W - Pin [PowrQuad transmission ] [Up to transmission serial no. 173498]
LX,RDTG002112N-19-1997/06/01
1/1
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
24. tm4523 - 6200, 6200L, 6300, 6300L,6400, 6400L, 6500, 6500L Tractors
Exploded View of Shift Cover
Exploded View of Shift Cover
LX1017515-UN: Shift Cover
LEGEND:
A - Shifter shaft (2 used)
B - Pin
C - Cover
D - Seal
E - Seal
F - Lever (2 St.))
G - 8 mm (5/16 in.) dia. spring pin (2 used)
H - 5 mm (13/64 in.) dia. spring pin (2 used)
I - Dowel Pin (2 used)
J - Shift Cover
K - Stop Assembly (prevents sticking; if equipped)
Repairing the shaft cover
NOTE:
Use an M6 screw to extract dowel pins (I).
1/2
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...