This service manual provides instructions for removing and installing the rocker assembly and rocker cover of a TM180/TM220 loader engine. The document describes the components of the rocker assembly, lubrication system, removal and installation procedures, disassembly and assembly instructions, and relevant torque specifications. Safety precautions are provided throughout regarding ensuring the engine is safe to work on and cleaning components.
Jcb tm220 telescopic wheeled loader service repair manual sn from 2128886 to ...kfmsiekdodk
This service manual provides instructions for removing and installing the rocker arm assembly on a JCB loader engine. The 3-page document describes the rocker arm operation and lubrication system. It provides detailed steps for checking the rocker arm components, removing and installing the rocker arm assembly, and disassembling and assembling the rocker arms. Tables list the required special tools and torque specifications for fasteners.
Jcb tm220 telescopic wheeled loader service repair manual sn from 2682926 to ...kfm8se9idid
This service manual provides instructions for removing and installing the rocker arm assembly on a JCB loader engine. The 3-page document describes the rocker arm operation and lubrication system. It provides detailed steps for checking the rocker arm components, removing and installing the rocker arm assembly, and disassembling and assembling the rocker arms. Tables list the required special tools and torque specifications for fasteners.
Jcb tm220 telescopic wheeled loader service repair manual sn from 2679851 to ...kfm8se9idid
This service manual provides instructions for removing and installing the rocker arm assembly on a JCB loader engine. The 3-page document describes the rocker arm operation and lubrication system. It provides detailed steps for checking the rocker arm components, removing and installing the rocker arm assembly, and disassembling and assembling the rocker arms. Tables list the required special tools and torque specifications for fasteners.
Mc cormick xtx tier 3 (2007 2013) - xtx3 - 145 tractor service repair manualfisjejfskemmd
This document provides part numbers, names, and other identifying information for components of an engine. It lists over 150 individual parts, including pumps, manifolds, gaskets, bolts, seals, and other engine internals. Additional information provided for each part includes serial or part numbers it is valid for, market applicability, and whether it is a replacement part.
Mc cormick x70 series tier 4 (2012 2013) - rpe1 - x70.80 tractor service repa...fisjejfskemmd
This document provides parts information for components of an engine assembly, including:
- Identification numbers, names, and quantities for over 100 individual parts like screws, plugs, pins, gaskets, pistons, valves, manifolds, and more.
- Reference numbers to indicate parts that are part of larger assemblies.
- Additional information like replacement codes, length measurements, market applicability codes.
Mc cormick x70 series tier 4 (2012 2013) - rpe1 - x70.70 tractor service repa...fisjejfskemmd
This document contains parts listings and diagrams for components of an X70 Series Tier 4 engine from 2012-2013 made by McCormick. It includes listings for various engine parts like cylinders, manifolds, pumps, gears, pins and other components. Each part is identified by a reference number, name, and sometimes specifications. Replacement and market applicability are also specified for some parts.
Mc cormick x70 series tier 4 (2012 2013) - rpe1 - x70.60 tractor service repa...fisjejfskemmd
This document provides parts information for components of an engine assembly, including:
- A 140kw engine, short engine, various plugs, dowel pins, screws, and other internal engine parts.
- Cylinder head, valves, springs, manifolds, and other head components.
- Piston, connecting rod, bearings, gears, flywheel, pulley, water pump, and other rotating and drive components.
Mc cormick x70 series tier 4 (2012 2013) - rpe1 - x70.40 tractor service repa...fisjejfskemmd
This document contains parts listings and component information for an engine. It includes listings of parts with identification numbers, descriptions, and reference designations. It also notes that some components are part of larger assemblies and provides serial number ranges and other technical specifications for some of the parts.
Jcb tm220 telescopic wheeled loader service repair manual sn from 2128886 to ...kfmsiekdodk
This service manual provides instructions for removing and installing the rocker arm assembly on a JCB loader engine. The 3-page document describes the rocker arm operation and lubrication system. It provides detailed steps for checking the rocker arm components, removing and installing the rocker arm assembly, and disassembling and assembling the rocker arms. Tables list the required special tools and torque specifications for fasteners.
Jcb tm220 telescopic wheeled loader service repair manual sn from 2682926 to ...kfm8se9idid
This service manual provides instructions for removing and installing the rocker arm assembly on a JCB loader engine. The 3-page document describes the rocker arm operation and lubrication system. It provides detailed steps for checking the rocker arm components, removing and installing the rocker arm assembly, and disassembling and assembling the rocker arms. Tables list the required special tools and torque specifications for fasteners.
Jcb tm220 telescopic wheeled loader service repair manual sn from 2679851 to ...kfm8se9idid
This service manual provides instructions for removing and installing the rocker arm assembly on a JCB loader engine. The 3-page document describes the rocker arm operation and lubrication system. It provides detailed steps for checking the rocker arm components, removing and installing the rocker arm assembly, and disassembling and assembling the rocker arms. Tables list the required special tools and torque specifications for fasteners.
Mc cormick xtx tier 3 (2007 2013) - xtx3 - 145 tractor service repair manualfisjejfskemmd
This document provides part numbers, names, and other identifying information for components of an engine. It lists over 150 individual parts, including pumps, manifolds, gaskets, bolts, seals, and other engine internals. Additional information provided for each part includes serial or part numbers it is valid for, market applicability, and whether it is a replacement part.
Mc cormick x70 series tier 4 (2012 2013) - rpe1 - x70.80 tractor service repa...fisjejfskemmd
This document provides parts information for components of an engine assembly, including:
- Identification numbers, names, and quantities for over 100 individual parts like screws, plugs, pins, gaskets, pistons, valves, manifolds, and more.
- Reference numbers to indicate parts that are part of larger assemblies.
- Additional information like replacement codes, length measurements, market applicability codes.
Mc cormick x70 series tier 4 (2012 2013) - rpe1 - x70.70 tractor service repa...fisjejfskemmd
This document contains parts listings and diagrams for components of an X70 Series Tier 4 engine from 2012-2013 made by McCormick. It includes listings for various engine parts like cylinders, manifolds, pumps, gears, pins and other components. Each part is identified by a reference number, name, and sometimes specifications. Replacement and market applicability are also specified for some parts.
Mc cormick x70 series tier 4 (2012 2013) - rpe1 - x70.60 tractor service repa...fisjejfskemmd
This document provides parts information for components of an engine assembly, including:
- A 140kw engine, short engine, various plugs, dowel pins, screws, and other internal engine parts.
- Cylinder head, valves, springs, manifolds, and other head components.
- Piston, connecting rod, bearings, gears, flywheel, pulley, water pump, and other rotating and drive components.
Mc cormick x70 series tier 4 (2012 2013) - rpe1 - x70.40 tractor service repa...fisjejfskemmd
This document contains parts listings and component information for an engine. It includes listings of parts with identification numbers, descriptions, and reference designations. It also notes that some components are part of larger assemblies and provides serial number ranges and other technical specifications for some of the parts.
Mc cormick x6.4 tier 4 (2014 ) - rp66 - x6.420 tractor service repair manualfisjejfskemmd
This document contains images and part numbers for components of an engine assembly. It includes items like pistons, rings, bearings, sensors, screws, nuts, pumps, manifolds, and wiring harnesses. Each image shows the part numbers and names for individual components that make up sub-assemblies of the overall engine.
Mc cormick x6 t4i lwb (2014 ) - rp76 - x6.480 tractor service repair manualfisjejfskemmd
This document contains diagrams and part numbers for components of an engine and related systems. It includes diagrams of engine components like pistons, rods, valves, pumps, manifolds and sensors. The diagrams include labels and part numbers for each individual component that makes up the various engine assemblies.
Mc cormick x6 t4i lwb (2014 ) - rp76 - x6.470 tractor service repair manualfisjejfskemmd
This document contains images and part numbers for components of an engine assembly for a McCormick X6 T4i LWB tractor from 2014. It includes over 50 images showing individual engine parts like screws, gaskets, filters, pumps, sensors and more. Each image lists the part numbers, descriptions and quantities of the components shown.
Mc cormick x6 t4i lwb (2014 ) - rp76 - x6.460 tractor service repair manualfisjejfskemmd
This document provides part numbers and descriptions for components of an engine assembly. It lists over 50 individual parts, including screws, plugs, rings, filters, manifolds, and sensors. Each part is identified by a reference number, part number, and brief description. The parts appear to make up several subassemblies that comprise a larger engine assembly.
Mc cormick x5 series t4i (2014 ) - rs28 - x5.40 tractor service repair manualfisjejfskemmd
This document provides information on engine components for a Perkins engine. It lists various part numbers, descriptions, and specifications. For example, it lists three engines labeled A, B and C that are 75kw Perkins engines. It also lists various engine components like cylinders, heads, pumps, sensors and other parts along with their part numbers and reference numbers. The document appears to be providing detailed component level information and part numbers for the overhaul or repair of a Perkins engine.
Mc cormick x5 series t4i (2014 ) - rs28 - x5.20 tractor service repair manualfisjejfskemmd
This document provides information on engine components for a Perkins engine. It lists various parts, including cylinders, pistons, rods, bearings, heads, blocks, pumps, sensors and other engine components. Each part is identified by a reference number, name and quantity required. The document indicates that the parts are components of larger engine assemblies.
Mc cormick x4 small range series (2015 ) - rs53 - x4.40 tractor service repa...fisjejfskemmd
This document contains parts lists and diagrams for components of an X4 tractor. It includes descriptions and part numbers for items like engines, radiators, filters, pipes, valves, and other mechanical parts. Measurements like length, diameter, and screw sizes are provided for many components. Notes specify variants for different markets or configurations with items like heaters or cab conditioning.
Mc cormick x4 small range series (2015 ) - rs53 - x4.35 tractor service repa...fisjejfskemmd
This document contains parts listings and diagrams for components of an agricultural tractor. It includes lists of parts with identification numbers, names, quantities and reference numbers. Notes provide information on replacements, alternatives, and whether items are for specific tractor models. Diagrams show assemblies and include labels for individual parts. The parts are for systems like the engine, starter motor, radiator, cab heater and controls.
Mc cormick x4 small range series (2015 ) - rs53 - x4.30 tractor service repa...fisjejfskemmd
This document contains parts listings and diagrams for components of an X4 Small Range Series (2015-) RS53 X4.30 machine made by McCormick. The parts include engines, radiators, hydraulic components, and other systems. Each part lists the part number, name, reference numbers for related parts, and other identifying information. Replacement parts are indicated.
Mc cormick x4 small range series (2015 ) - rs53 - x4.20 service repair manualfisjejfskemmd
This document contains parts listings and diagrams for components of an agricultural machine. It includes descriptions and part numbers for items like engines, radiators, filters, pipes, and other mechanical parts. Properties like length, diameter, and material are specified for some items. Variants are indicated with letters like A, B, C. The components are identified as replacement parts and some include instructions to see additional pages for more information.
Mc cormick x4 series (2014 ) - rs52 - x4.70 tractor service repair manualfisjejfskemmd
This document provides parts information for a Deutz tcd 3.6 l4 - 74,4 kw engine. It lists various engine parts like bolts, gaskets, covers, pumps, sensors and includes the part numbers and images of each part. It directs the user to contact the spare parts department for any questions.
Mc cormick x4 series (2014 ) - rs52 - x4.60 tractor service repair manualfisjejfskemmd
This document provides parts information for a Deutz tcd 3.6 l4 - 70 kw engine. It includes images and part numbers for various engine components such as bolts, gaskets, covers, pumps, sensors, and other parts. Contact the spare parts department for replacement parts.
Mc cormick v series cab tier 3 new generation (2007 2009) - rp04 - 80 tractor...fisjejfskemmd
This document provides parts information for an engine. It lists part numbers, descriptions, serial number ranges and other technical specifications for over 140 individual engine parts, including blocks, heads, crankshafts, gears, pumps, housings and more. The parts are associated with a 54.5kw V Series engine from a McCormick tractor model made between 2007-2009.
Mc cormick v series cab tier 3 new generation (2007 2009) - rp04 - 65 tractor...fisjejfskemmd
This document contains parts listings and diagrams for components of a Perkins diesel engine, including the cylinder block, cylinder head, camshaft, fuel pump, sump, and other parts. It provides reference numbers, quantities, and other identifying information for over 150 individual engine parts. Notes indicate some parts are only for certain engine models or production ranges.
Mc cormick v series cab tier 2 new generation (2005 2007) - rp03 -v85 tractor...fisjejfskemmd
This document provides part numbers and component information for engine repair. It lists parts like pistons, rods, bearings, gaskets and their corresponding part numbers. Specifications are provided like tolerance ranges, market fitment and whether items are replacement parts. Quantities and serial number ranges for applicability are also included.
Mc cormick mtx series (2002 2007) - mtx3 - mtx200 tractor service repair manualfisjejfskemmd
This document contains parts listings and diagrams for various components of McCormick MTX tractors, including the engine, radiator, cooling and hydraulic systems. It lists part numbers, descriptions and diagrams of components such as seals, hoses, bolts, brackets, shields, dampers, gears, flywheels and other parts. The parts apply to MTX155, MTX175 and MTX200 tractors from model years 2002-2007.
This document provides parts information for the Massey Ferguson 8690 tractor engine. It includes three pages detailing individual engine parts, including identification numbers, quantities, descriptions and other specifications. The engine is a Tier 2-3, 84 CTA engine that was phased out in 2011. The document lists various engine components such as the cylinder block, timing gear housing, alternator and bracket.
This document provides a list of parts for Massey Ferguson 8470/8480 Tractors (Tier 3) engines and equipment. It includes 51 numbered items with descriptions of engines, starters, belts, fans, clutches, nuts, bolts, panels, supports, and other components. Serial numbers are provided to indicate applicable parts for different engine models and years. Footnotes provide additional details on some parts.
Kubota b6000 tractor parts catalogue manualfisjejfskemmd
This document provides instructions and definitions for parts books. It explains that the heading on parts pages will match the picture pages. It defines the column headings for part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It provides country codes for parts that may be different in other countries. It also includes an index of part groups for a B6000 model.
Kubota b5200 d tractor parts catalogue manualfisjejfskemmd
This document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included and what they represent. The document then provides an example page from the parts book that lists specific part numbers, descriptions, quantities and other details for the crankcase group of an engine.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Mc cormick x6.4 tier 4 (2014 ) - rp66 - x6.420 tractor service repair manualfisjejfskemmd
This document contains images and part numbers for components of an engine assembly. It includes items like pistons, rings, bearings, sensors, screws, nuts, pumps, manifolds, and wiring harnesses. Each image shows the part numbers and names for individual components that make up sub-assemblies of the overall engine.
Mc cormick x6 t4i lwb (2014 ) - rp76 - x6.480 tractor service repair manualfisjejfskemmd
This document contains diagrams and part numbers for components of an engine and related systems. It includes diagrams of engine components like pistons, rods, valves, pumps, manifolds and sensors. The diagrams include labels and part numbers for each individual component that makes up the various engine assemblies.
Mc cormick x6 t4i lwb (2014 ) - rp76 - x6.470 tractor service repair manualfisjejfskemmd
This document contains images and part numbers for components of an engine assembly for a McCormick X6 T4i LWB tractor from 2014. It includes over 50 images showing individual engine parts like screws, gaskets, filters, pumps, sensors and more. Each image lists the part numbers, descriptions and quantities of the components shown.
Mc cormick x6 t4i lwb (2014 ) - rp76 - x6.460 tractor service repair manualfisjejfskemmd
This document provides part numbers and descriptions for components of an engine assembly. It lists over 50 individual parts, including screws, plugs, rings, filters, manifolds, and sensors. Each part is identified by a reference number, part number, and brief description. The parts appear to make up several subassemblies that comprise a larger engine assembly.
Mc cormick x5 series t4i (2014 ) - rs28 - x5.40 tractor service repair manualfisjejfskemmd
This document provides information on engine components for a Perkins engine. It lists various part numbers, descriptions, and specifications. For example, it lists three engines labeled A, B and C that are 75kw Perkins engines. It also lists various engine components like cylinders, heads, pumps, sensors and other parts along with their part numbers and reference numbers. The document appears to be providing detailed component level information and part numbers for the overhaul or repair of a Perkins engine.
Mc cormick x5 series t4i (2014 ) - rs28 - x5.20 tractor service repair manualfisjejfskemmd
This document provides information on engine components for a Perkins engine. It lists various parts, including cylinders, pistons, rods, bearings, heads, blocks, pumps, sensors and other engine components. Each part is identified by a reference number, name and quantity required. The document indicates that the parts are components of larger engine assemblies.
Mc cormick x4 small range series (2015 ) - rs53 - x4.40 tractor service repa...fisjejfskemmd
This document contains parts lists and diagrams for components of an X4 tractor. It includes descriptions and part numbers for items like engines, radiators, filters, pipes, valves, and other mechanical parts. Measurements like length, diameter, and screw sizes are provided for many components. Notes specify variants for different markets or configurations with items like heaters or cab conditioning.
Mc cormick x4 small range series (2015 ) - rs53 - x4.35 tractor service repa...fisjejfskemmd
This document contains parts listings and diagrams for components of an agricultural tractor. It includes lists of parts with identification numbers, names, quantities and reference numbers. Notes provide information on replacements, alternatives, and whether items are for specific tractor models. Diagrams show assemblies and include labels for individual parts. The parts are for systems like the engine, starter motor, radiator, cab heater and controls.
Mc cormick x4 small range series (2015 ) - rs53 - x4.30 tractor service repa...fisjejfskemmd
This document contains parts listings and diagrams for components of an X4 Small Range Series (2015-) RS53 X4.30 machine made by McCormick. The parts include engines, radiators, hydraulic components, and other systems. Each part lists the part number, name, reference numbers for related parts, and other identifying information. Replacement parts are indicated.
Mc cormick x4 small range series (2015 ) - rs53 - x4.20 service repair manualfisjejfskemmd
This document contains parts listings and diagrams for components of an agricultural machine. It includes descriptions and part numbers for items like engines, radiators, filters, pipes, and other mechanical parts. Properties like length, diameter, and material are specified for some items. Variants are indicated with letters like A, B, C. The components are identified as replacement parts and some include instructions to see additional pages for more information.
Mc cormick x4 series (2014 ) - rs52 - x4.70 tractor service repair manualfisjejfskemmd
This document provides parts information for a Deutz tcd 3.6 l4 - 74,4 kw engine. It lists various engine parts like bolts, gaskets, covers, pumps, sensors and includes the part numbers and images of each part. It directs the user to contact the spare parts department for any questions.
Mc cormick x4 series (2014 ) - rs52 - x4.60 tractor service repair manualfisjejfskemmd
This document provides parts information for a Deutz tcd 3.6 l4 - 70 kw engine. It includes images and part numbers for various engine components such as bolts, gaskets, covers, pumps, sensors, and other parts. Contact the spare parts department for replacement parts.
Mc cormick v series cab tier 3 new generation (2007 2009) - rp04 - 80 tractor...fisjejfskemmd
This document provides parts information for an engine. It lists part numbers, descriptions, serial number ranges and other technical specifications for over 140 individual engine parts, including blocks, heads, crankshafts, gears, pumps, housings and more. The parts are associated with a 54.5kw V Series engine from a McCormick tractor model made between 2007-2009.
Mc cormick v series cab tier 3 new generation (2007 2009) - rp04 - 65 tractor...fisjejfskemmd
This document contains parts listings and diagrams for components of a Perkins diesel engine, including the cylinder block, cylinder head, camshaft, fuel pump, sump, and other parts. It provides reference numbers, quantities, and other identifying information for over 150 individual engine parts. Notes indicate some parts are only for certain engine models or production ranges.
Mc cormick v series cab tier 2 new generation (2005 2007) - rp03 -v85 tractor...fisjejfskemmd
This document provides part numbers and component information for engine repair. It lists parts like pistons, rods, bearings, gaskets and their corresponding part numbers. Specifications are provided like tolerance ranges, market fitment and whether items are replacement parts. Quantities and serial number ranges for applicability are also included.
Mc cormick mtx series (2002 2007) - mtx3 - mtx200 tractor service repair manualfisjejfskemmd
This document contains parts listings and diagrams for various components of McCormick MTX tractors, including the engine, radiator, cooling and hydraulic systems. It lists part numbers, descriptions and diagrams of components such as seals, hoses, bolts, brackets, shields, dampers, gears, flywheels and other parts. The parts apply to MTX155, MTX175 and MTX200 tractors from model years 2002-2007.
This document provides parts information for the Massey Ferguson 8690 tractor engine. It includes three pages detailing individual engine parts, including identification numbers, quantities, descriptions and other specifications. The engine is a Tier 2-3, 84 CTA engine that was phased out in 2011. The document lists various engine components such as the cylinder block, timing gear housing, alternator and bracket.
This document provides a list of parts for Massey Ferguson 8470/8480 Tractors (Tier 3) engines and equipment. It includes 51 numbered items with descriptions of engines, starters, belts, fans, clutches, nuts, bolts, panels, supports, and other components. Serial numbers are provided to indicate applicable parts for different engine models and years. Footnotes provide additional details on some parts.
Kubota b6000 tractor parts catalogue manualfisjejfskemmd
This document provides instructions and definitions for parts books. It explains that the heading on parts pages will match the picture pages. It defines the column headings for part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It provides country codes for parts that may be different in other countries. It also includes an index of part groups for a B6000 model.
Kubota b5200 d tractor parts catalogue manualfisjejfskemmd
This document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included and what they represent. The document then provides an example page from the parts book that lists specific part numbers, descriptions, quantities and other details for the crankcase group of an engine.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
2. 15 - Engine
42 - Rocker and Fittings
00 - General
15 - 131 9813/3150-2 15 - 131
Operation
When the camshaft lobe raises the push-rod, the
push-rod pushes the rocker arm up. Due to this the
rocker arm presses down on the valve stem to open
the valve. When the rocker arm returns due to the
camshafts rotation, the valve spring closes the valve.
Lubrication
Oil is fed from the main gallery through a drilling
which passes up through the crankcase and cylinder
head to a small transfer gallery under the rocker
shaft pedestal. The oversize rocker shaft fixing bolt
hole allows oil to pass into a drilling in the centre of
the rocker shaft. Further cross drillings transfer oil
to each of the rocker pivot bushes. A cross drilling
in each rocker transfers oil to the top of the rocker
where it flows by gravity along a groove to the rocker
tip.
Figure 229.
1 Main gallery 2 Small transfer gallery
3 Shaft pedestal 4 Rocker shaft fixing bolt hole
5 Centre rocker shaft drilling 6 Cross drillings
7 Rocker pivot bushes 8 Cross drilling
9 Groove
3. 15 - Engine
42 - Rocker and Fittings
00 - General
15 - 132 9813/3150-2 15 - 132
Check (Condition)
1. Check the rocker shaft and rocker bushings for
signs of damage and excessive wear. Measure
the rocker shaft diameter and rocker bearing
bushes to confirm they are within service limits.
Refer to Technical Data. Note: The rocker
bearing bushes are not renewable. If a rocker
bearing bush is damaged or worn the rocker
must be renewed as a complete assembly.
Refer to: PIL 15-42.
2. Make sure that all oil-ways and cross drillings in
the rocker shaft, rocker arms and pedestals are
clear and free from debris. Use an air line to blow
through cross drillings.
Remove and Install
Before Removal
1. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
2. Get access to the engine.
3. Disconnect and remove the fuel pipes from the
fuel injectors.
Refer to: PIL 18-96.
4. Remove the rocker cover.
Refer to: PIL 15-42-06.
Remove
1. Remove the rocker shaft fixing screws.
Figure 230.
B
C
A
A Rocker shaft fixing screw (x4)
B Rocker arm assembly
C Cylinder head
2. Make sure that you keep all the fixing screws in
their original positions.
3. Lift the rocker arm assembly from the cylinder
head completely.
4. 15 - Engine
42 - Rocker and Fittings
00 - General
15 - 133 9813/3150-2 15 - 133
Figure 231.
C
B
B Rocker arm assembly
C Cylinder head
4. Lift off the valve bridge pieces from the pairs of
inlet and exhaust valves.
Figure 232.
D
E
D Valve bridge (x6)
E Push rod (x6)
5. Remove the push rods from the crankcase.
Before Installation
1. Make sure that all items are clean and free from
damage and corrosion. If components within the
rocker assembly are damaged or worn.
2. Make sure that all oilways and cross drillings in
the cylinder head, rocker shaft and pedestals are
clear and free from debris. Use an air line to blow
through the cross drillings.
3. Use a suitable degreasing agent to clean the top
of the cylinder head.
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Insert the push rods into the crankcase. Make
sure that they engage with the camshaft tappets.
Figure 233.
E E
F
E Push rod
F Camshaft tappet
3. Install the bridge pieces on to the pairs of inlet
and exhaust valves in the cylinder head.
5. 15 - Engine
42 - Rocker and Fittings
00 - General
15 - 134 9813/3150-2 15 - 134
Figure 234.
D
D
C
C Cylinder head
D Valve bridge
4. Align the rocker arm assembly on a level surface.
5. Make sure that you install the rocker arm
assembly on the cylinder head with respect to the
plug and the holder.
Figure 235.
HE
E Push rod
H Plug
Figure 236.
G
B
B Rocker arm assembly
G Holder
6. Make sure that the rocker arm assembly is
seated properly on the push rod.
7. Make sure that you put the crankshaft gear key
in the position as shown to avoid the rocker arm
rod bending at the time of tightening the fixing
screws.
Figure 237.
J
J Gear key
8. Put the rocker arm fixing screws and tighten the
screws in the sequence shown.
Figure 238.
A
B
2 1 3
4
A Rocker shaft fixing screw
B Rocker arm assembly
9. Tighten the screws to the correct torque value.
After Installation
1. Measure and adjust the valve clearances.
Refer to: PIL 15-30.
2. Install the rocker cover.
Refer to: PIL 15-42-06.
6. 15 - Engine
42 - Rocker and Fittings
00 - General
15 - 135 9813/3150-2 15 - 135
3. Install and connect the fuel pipes to the fuel
injectors.
Refer to: PIL 18-96.
Table 76. Torque Values
Item Nm
A 25
Disassemble and Assemble
Special Tools
Description Part No. Qty.
Insertion Pliers for
Hydraulic Tappets
892/12425 1
Before Disassembly
1. Remove the rocker cover.
Refer to: PIL 15-42-06.
2. Remove the rocker assembly.
Refer to: PIL 15-42-00.
Disassemble
1. Remove the retainer ring.
Figure 239.
C
D
B
A
A Discharge rocker arm
B Hydraulic tappet
C Retainer
D Shoulder ring
2. Remove the shoulder ring.
3. Remove the rockers and the holders from the
rocker shaft.
7. 15 - Engine
42 - Rocker and Fittings
00 - General
15 - 136 9813/3150-2 15 - 136
Figure 240.
A
G
E
F
A Discharge rocker arm
E Rocker shaft
F Holder
G Holder 1
4. Label the rockers and the holders to make sure
that they are installed in the correct positions on
assembly.
5. Remove the tappets from the rocker.
Figure 241.
B A
A Discharge rocker arm
B Hydraulic tappet
6. Check (Condition) of the rocker arm assembly for
signs of damage and excessive wear.
Refer to: PIL 15-42-00.
Assemble
1. The assembly procedure is the opposite of
the disassembly procedure. Additionally do the
following steps.
2. Install the tappets into the rocker arm.
2.1. Insert the tappets into the hydraulic tappet
insertion pliers.
Special Tool: Insertion Pliers for Hydraulic
Tappets (Qty.: 1)
2.2. Fill the chamber of the tappet with oil.
2.3. Put the pad on the tappet.
Figure 242.
A
B
H
J
A Discharge rocker arm
B Hydraulic tappet
H Chamber
J Pad
2.4. Position the rocker arm in the pliers.
2.5. Use the pliers to push the tappet through
the rocker arm until the tappet is properly
inserted.
3. Lubricate the rocker shaft with clean engine oil.
4. Install the rocker arms in the correct position, turn
the rocker shaft with the lower height towards the
timing gear system side.
5. Put the lock ring into the seat of the rocker shaft.
Figure 243.
D
C
C
E
L
K
E
C Retainer
D Shoulder ring
E Rocker shaft
K Seat
L Rocker shaft lower height
6. Position the fixing screw support surface facing
upwards.
7. Put the two shoulder rings on the rocker shaft.
8. Sequentially put the suction rocker arm, the
holder and the discharge rocker arm on the
rocker shaft.
8. 15 - Engine
42 - Rocker and Fittings
00 - General
15 - 137 9813/3150-2 15 - 137
Figure 244.
F
D
C A
N
G
M
E
A Discharge rocker arm
C Retainer
D Shoulder ring
E Rocker shaft
F Holder
G Holder 1
M Spring
N Suction rocker arm
9. The discharge rocker arm is shorter than the
suction rocker arm.
10. Install the spring on the rocker shaft.
11. Do the steps 8 and 10 for all the remaining rocker
arms.
12. Install the holder 1 with the last pair of rocker arm
towards the flywheel.
13. The spring makes sure that the holder and the
holder 1 are kept in place.
14. Make sure that the rockers are installed in their
original positions along the rocker shaft.
15. Put the shoulder rings and the lock ring to lock all
the components on the rocker shaft.
After Assembly
1. Install the rocker assembly.
Refer to: PIL 15-42-00.
2. Install the rocker cover.
Refer to: PIL 15-42-06.
9. 15 - Engine
42 - Rocker and Fittings
06 - Rocker Cover
15 - 141 9813/3150-2 15 - 141
Remove and Install
Special Tools
Description Part No. Qty.
Rocker Arm Cover
Mounting Studs
892/12426 1
Before Removal
1. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
2. Clean the engine.
Refer to: PIL 15-00-00.
Figure 245.
B
C
A
A Rocker arm cover
B Screws
C Gasket
Remove
1. Get access to the engine.
2. Remove the high pressure fuel pipes.
Refer to: PIL 18-96-03.
3. Remove the fuel bleed off fuel pipes.
Refer to: PIL 18-96-06.
4. Disconnect the electrical connectors at the fuel
injectors.
Refer to: PIL 18-18-03.
5. Disconnect the electrical connector at the coolant
temperature sensor.
Refer to: PIL 15-84-33.
6. Move the electrical harness away from the rocker
cover.
7. Progressively remove the rocker arm cover
screws from 1 to 8 in reverse order, starting at
bolt 8.
Figure 246.
3 7
628 4
15
8. Lift the rocker cover from the cylinder head
9. Discard the gasket.
10. The rocker cover injector seals must be replaced.
Refer to: PIL 18-18-03.
Install
1. Remove all oil and sludge contamination from
inside the valve chamber.
2. Use a new rocker arm cover gasket.
3. Make sure you align the gasket on the cylinder
head with the rocker cover fastening screws.
4. Locate the two guide pins before mounting the
rocker arm cover.
Special Tool: Rocker Arm Cover Mounting Studs
(Qty.: 1)
5. Put sleeves/covers on the four injectors to
prevent from damage.
6. Apply a Vaseline lubricant to the seals.
10. 15 - Engine
42 - Rocker and Fittings
06 - Rocker Cover
15 - 142 9813/3150-2 15 - 142
Figure 247.
D
C
D
E
A
F
B
A Rocker arm cover
B Screws
C Gasket
D Guide pins
E Seal (lubricate upper part)
F Seal (lubricate inner part)
7. Install the rocker arm cover and put the screws
in sequence from 1 to 8.
8. Tighten the screws to the correct torque value.
9. Remove the sleeves/covers.
After Installation
1. The high pressure fuel pipes must be replaced
with new parts.
Refer to: PIL 18-96-03.
2. Start the engine and check for oil and fuel leaks.
Table 77. Torque Values
Item Nm
B 10
11. 15 - Engine
42 - Rocker and Fittings
21 - Tappet
15 - 146 9813/3150-2 15 - 146
Technical Data
Tappets Dimensions
Figure 248.
A
C
B
Table 78.
Item Dimension Aspect Dimension
A Perpendicularity 0.02mm (max)
B Length 46.5 ± 0.2mm
Clearance between Tappet and Housing
Figure 249.
D
E
F
E Tappet
F Tappet housing
Table 79.
Item Dimensions Clearance Wear Limit
C 11.966-11.984mm
D
(1)
12.000-12.018mm
0.060-0.105mm 0.080mm
(1) Measure the diameter at two points. The difference between the two values measured must not be more
than be 0.02mm.
12. 15 - Engine
42 - Rocker and Fittings
21 - Tappet
15 - 147 9813/3150-2 15 - 147
Component Identification
Figure 250.
C
A
D
E
F
H
G
B
A Low pressure chamber B High pressure chamber
C Hydraulic tappets oil refill pipe D Retaining ring
E Piston F Unidirectional valve
G Tappet body H Spring
13. 15 - Engine
42 - Rocker and Fittings
21 - Tappet
15 - 148 9813/3150-2 15 - 148
Operation
Hydraulic Tappet
The operating principle of the hydraulic tappet is
based on the incompressibility of the liquid and on
controlled leakage between the piston and the tappet
body.
A constant supply of pressurised oil is provided to the
low pressure chamber. The pressurized oil can only
get the access to the high pressure chamber through
the unidirectional (non-return) valve.
The high pressure chamber is filled when the rocker
arm is on the base radius of the cam and the spring
holds the piston against the valve stem preventing
from system play as well as vibration and noise.
Due to the spring movement, the tappet extends.
This creates a small pressure decrease in the high
pressure chamber to open the non-return valve. Oil
is then transferred from the low pressure chamber
to the high pressure chamber to restore the proper
amount of oil required to eliminate any play in the
valves.
Difficult Operating Conditions
For proper operation of the hydraulic tappets it is
essential that the low pressure chamber of the piston
is always full of oil.
In some conditions this may not occur (due to the
fact that oil leaks away when the engine is switched
off, which can also partially drain the tappets): this
situation will result in play that will occur with a typical
noise similar to ticking, not to be confused with the
normal ticking of the injectors.
When the engine is cold, the tappet filling time could
be very long if the oil used is not suitable for the
specific environmental conditions.
If the engine is very hot or at idle speed, oil pressure
may be low, and small air bubbles could form in
the circuit. Because of this, the lubricant becomes
compressible, thus compressing the tappet slightly
and producing valve play which is responsible for the
ticking sound.
In all cases, the ticking should not last too long (max
5 minutes) if not, the problem will surely be due to
the poor quality of the oil, wear or impurities that,
transported by the oil, can infiltrate between the ball
valve and its seat inside the piston This affects the
operation of the tappet itself. In these cases you must
replace the oil or the hydraulic tappets.
Continuous ticking or abnormal sound for prolonged
periods is a symptom of a possible malfunction, and
requires the removal and replacement of oil and
hydraulic tappets.
14. 15 - Engine
42 - Rocker and Fittings
21 - Tappet
15 - 149 9813/3150-2 15 - 149
Check (Condition)
Tappets and Tappet Housing Check
1. Put the tappet on a V-notch surface plate.
2. Measure the following dimensions of the tappet
and tappet housing.
2.1. Perpendicularity of the base with a dial
gauge.
2.2. Length of the tappet to assess the wear.
2.3. Diameter of the tappet housing with an
internal dial gauge.
3. Make sure that you measure the housing
diameter at two locations and the difference
between the two values should not be more than
0.02mm.
4. Measure the clearance between the tappet and
the tappet housing from the values derived in
step 2.
5. Make sure that all the values are within the
allowable limits.
Refer to: PIL 15-42-21.
Calibrate
Tappets Dimensions
Use a surface plate and a dial gauge as shown.
Check the perpendicularity of the plate, making the
tappet rotate in the direction of the arrow. With a
gauge, check the length of the tappet to assess wear.
The values measured must be within tolerances.
Refer to: PIL 15-42-21.
Figure 251.
A
C
B
A Tappet diameter
B Tappet length
C Perpendicularity
Clearance between Tappet and Housing
Use an internal dial gauge to measure the diameter
of the tappet housings. Measure quota in two
different points. The difference between the two
values measured must be within tolerance. Refer to:
PIL 15-42-21.
Figure 252.
D
E
F
D Quota
E Tappet
F Tappet housing
15. 15 - Engine
45 - Oil Sump
00 - General
15 - 153 9813/3150-2 15 - 153
00 - General
Introduction .................................................. 15-153
Technical Data ............................................. 15-154
Remove and Install ..................................... 15-154
Introduction
Figure 253.
A
A Oil Sump
16. 15 - Engine
45 - Oil Sump
00 - General
15 - 154 9813/3150-2 15 - 154
Technical Data
Table 80.
Oil sump type Wet
Oil sump capacity 7.5L
Remove and Install
Oil
Oil is toxic. If you swallow any oil, do not induce
vomiting, seek medical advice. Used engine oil
contains harmful contaminants which can cause skin
cancer. Do not handle used engine oil more than
necessary. Always use barrier cream or wear gloves
to prevent skin contact. Wash skin contaminated with
oil thoroughly in warm soapy water. Do not use petrol,
diesel fuel or paraffin to clean your skin.
CAUTION! It is illegal to pollute drains, sewers
or the ground. Clean up all spilt fluids and/or
lubricants. Used fluids and/or lubricants, filters and
contaminated materials must be disposed of in
accordance with local regulations. Use authorised
waste disposal sites.
CAUTION! Oil will gush from the hole when the drain
plug is removed. Keep to one side when you remove
the plug.
Before Removal
1. Get access to the engine.
2. Drain the engine oil.
Refer to: PIL 15-00-00.
Remove
1. Remove the screws that attach the oil sump to
the bedplate.
2. Insert plates in the areas shown by the arrows.
Figure 254.
D
EE
E E
D Oil sump
E Plate insertion areas
3. Lift the plates to remove the oil sump.
4. Remove the remaining sealant from the oil sump
and bedplate contact surfaces.
5. Remove the screws that attach the oil intake
pipe.
17. 15 - Engine
45 - Oil Sump
00 - General
15 - 155 9813/3150-2 15 - 155
6. Remove the oil intake pipe and the gasket.
Discard the gasket.
Figure 255.
G
H
F
F Screw
G Oil intake pipe
H Gasket
7. Remove the oil vapour pipes.
Figure 256.
J
J Oil vapour pipes
Install
1. Apply Loctite 648 on the threads of the oil vapour
pipes.
2. Install the oil vapour pipes.
3. Put a new gasket in the seat of the oil intake pipe.
4. Attach the oil intake pipe onto the bedplate with
the screws.
5. Tighten the screws to the correct torque value.
6. Make sure that the oil sump is clean and free from
contamination.
7. Make sure that the contact faces on the oil sump
and bedplate are clean.
8. Apply a bead of sealant (Loctite 5660) on the oil
sump contact surface to the specified thickness.
Dimension: 2.5mm
Figure 257.
K
K
M
L
K Mounting studs
L Screw
M Sealant application surface
9. Install the mounting studs to help you to position
the oil sump.
10. Put the oil sump on the bedplate. Make sure that
the screw holes are aligned.
11. Strictly follow the torque tightening sequence.
Tighten the screws to the correct torque value.
Figure 258. Torque Sequence
10 11 12 13
14
18
17
16
15
20 194 3 2
6
5
7
8
9
1
12. After you tighten all of the screws, loosen screw
no.1 and tighten again to the correct torque
value.
13. Clean and install the drain plugs with a new O-
ring. Tighten the plug to the correct torque value.
14. Through one of the filler points, fill the engine with
the recommended oil to the MAX mark on the
dipstick.
15. Wipe off any spilt oil, install the filler cap and
make sure it is secure.
18. 15 - Engine
45 - Oil Sump
00 - General
15 - 156 9813/3150-2 15 - 156
16. Operate the engine, until the oil pressure low
warning light has extinguished.
17. Check for oil leakage.
18. When the oil has cooled, check the oil level
again, and if necessary top up with clean engine
oil.
Table 81. Torque Values
Item Nm
B 35
F 10
L 25
19. 15 - Engine
45 - Oil Sump
03 - Drain Plug
15 - 157 9813/3150-2 15 - 157
03 - Drain Plug
Remove and Install
Oil
Oil is toxic. If you swallow any oil, do not induce
vomiting, seek medical advice. Used engine oil
contains harmful contaminants which can cause skin
cancer. Do not handle used engine oil more than
necessary. Always use barrier cream or wear gloves
to prevent skin contact. Wash skin contaminated with
oil thoroughly in warm soapy water. Do not use petrol,
diesel fuel or paraffin to clean your skin.
CAUTION! It is illegal to pollute drains, sewers
or the ground. Clean up all spilt fluids and/or
lubricants. Used fluids and/or lubricants, filters and
contaminated materials must be disposed of in
accordance with local regulations. Use authorised
waste disposal sites.
Remove
Drain the oil when the engine is warm as
contaminants held in suspension will then be drained
with the oil.
1. Gain access to the oil sump.
2. Place a container of suitable size below the drain
plug.
3. Remove the oil filler cap.
Figure 259.
A
A Oil filler cap
CAUTION! Oil will gush from the hole when the
drain plug is removed. Keep to one side when
you remove the plug.
4. Remove the oil sump drain plug and O-ring. Let
the oil drain out.
Figure 260.
B C
B Drain plug
C O-ring
Install
1. Clean and install the drain plug with a new O-ring.
2. Tighten the plug to the correct torque value.
3. Through one of the filler points, fill the engine with
the recommended oil to the MAX mark on the
dipstick.
4. Wipe off any spilt oil, install the filler cap and
make sure it is secure.
5. Operate the engine, until the oil pressure low
warning light has extinguished.
6. Check for oil leakage.
7. When the oil has cooled, check the oil level
again, and if necessary top up with clean engine
oil.
Table 82. Torque Values
Item Nm
B 35
20. 15 - Engine
45 - Oil Sump
09 - Dipstick
15 - 158 9813/3150-2 15 - 158
09 - Dipstick
Check (Level)
1. Remove the engine oil dipstick.
2. Make sure that the oil level is at the MAX mark
on the dipstick.
3. If the oil level is below the required quantity, fill
the engine with the recommended oil through the
oil filler point.
Figure 261.
A
A Oil filler cap
Figure 262.
E
F
D
D Dipstick
E Maximum level mark
F Minimum level mark
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. 15 - Engine
45 - Oil Sump
10 - Dipstick Pipe
15 - 159 9813/3150-2 15 - 159
10 - Dipstick Pipe
Remove and Install
Before removal
1. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
2. Get access to the engine.
Remove
1. Remove the screw.
2. Pull out the oil dipstick pipe in the direction of the
arrow.
Figure 263.
A
B
C
A Dipstick
B Dipstick pipe
C Screw
Install
1. Put the new gasket on the seat of the pipe.
Figure 264.
B
E
D
B
B Dipstick pipe
D Seat
E Gasket
2. Attach the oil dipstick pipe to the crankcase with
the screw.
Figure 265.
B
C F
B Dipstick pipe
C Screw
F Manifold
3. Tighten the pipe on the manifold.
4. Check the gaskets are correctly installed.
Figure 266.
G
B
A
A Dipstick
B Dipstick pipe
G Gasket
5. Put the dipstick into the pipe.
After installation
1. Start the engine and check for any leakage.
24. 15 - Engine
51 - Timing Gear
00 - General
15 - 161 9813/3150-2 15 - 161
00 - General
Introduction .................................................. 15-161
Component Identification ............................. 15-162
Remove and Install ..................................... 15-164
Introduction
The timing gears are located inside a casing at the
front end of the engine.
The engine must be timed so that the camshaft
operates the valves at the correct time relative to the
crankshaft position.
Valve timing is achieved by ensuring that the
camshaft drive gear is meshed to the crankshaft gear
at their correct angular positions, Refer to Engine-
General, Operation, The Four Stroke Cycle for more
information about valve timing.