This service manual provides information on servicing excavator models JS200, JS210, JS220, and JS235. It contains instructions from the manufacturer and copyrighted content. The manual covers safety procedures and contains sections on various machine systems including the engine, fuel system, cooling system, driveline, hydraulics, electrical system and other components. It provides identification of parts, operating descriptions, and procedures for inspection, removal and installation of components.
Mc cormick c l europa tier 2 (2007-2008) - rs50 - 70 tractor service repair m...fdusjejkskem
This document contains a list of engine components for a McCormick tractor. It includes over 140 individual parts with descriptions, part numbers, quantities needed, and other technical specifications. The parts are for the engine, fuel system, valves, pistons, bearings, gears, and other internal components. The document provides replacement and overhaul instructions for the different tractor models and engine types.
Mc cormick bmax tier 3 (2011 ) - rt64 - 100 tractor service repair manualfdusjejkskem
This document contains parts information for engines and components. It lists part numbers, descriptions, and indicates whether parts are for replacement or reference purposes. Serial or engine numbers are referenced for some parts to indicate applicability. Kit designations and tolerance specifications are also provided for some items.
Mc cormick bmax tier 3 (2011 ) - rt64 - 90 tractor service repair manualfdusjejkskem
This document provides parts information for an engine, including:
- Part numbers, serial numbers, replacement kits, and other identifying information for various engine components
- Quantity and other specification information for replacements
- Notes on components that are part of assemblies and not individually serviced
The parts cover multiple engine models and ranges of serial numbers.
Mc cormick bmax tier 3 (2011 ) - rt64 - 80 tractor service repair manualfdusjejkskem
This document contains parts listings and component information for an engine. It includes over 125 individual part listings with information like part numbers, serial numbers, replacement parts, and component types. The parts are for items like the cylinder block, pistons, valves, pumps, sensors and other engine components.
Mc cormick bmax (2007 ) - rt62 - 100 tractor service repair manualfdusjejkskem
This document provides part numbers and component information for engine repairs. It includes listings of parts, part numbers, kits, and specifications needed to repair items like cylinders, pistons, pumps, housings, and other engine components. Quantities of parts and application ranges based on tractor serial numbers are also provided. The document appears to be from an engine repair manual or parts catalog.
Mc cormick 9 7 series (2014- ) - rs37 - 7070 - 7080 arm tractor service repai...fdusjejkskem
This document contains parts listings and diagrams for components of McCormick RS37 model 7070 and 7080 engines. It lists part numbers, names, and other identifying information for items like blocks, heads, crankcases, manifolds, and other internal engine parts. Notes provide information on applications, specifications like lengths and diameters, and whether parts are replacement options. The parts are depicted visually in diagrams to show their place in the engine assembly.
Mc cormick (2011 ) - rs43 - 6450 ism-vrm tractor service repair manualfdusjejkskem
This document provides part numbers and descriptions for components that make up various tractor assemblies. It includes information like part names and numbers, quantities needed, and application details. Replacement part designations and quantities per tractor are also provided for some items. Images are referenced for additional information.
Komatsu wa250 6 wheel loader service repair manual sn75001 and upfdusjejkskem
This document provides information about Komatsu wheel loaders, including:
- The shop manual covers models WA250-6 and WA250PZ-6.
- Specifications for the engines, cooling systems, power trains, steering systems, brake systems, hydraulics systems, and other components are included.
- Standard values, testing and adjustment procedures, and troubleshooting information is provided.
- Failure codes, fuse locations, and other diagnostic information is listed to assist with repairs.
Mc cormick c l europa tier 2 (2007-2008) - rs50 - 70 tractor service repair m...fdusjejkskem
This document contains a list of engine components for a McCormick tractor. It includes over 140 individual parts with descriptions, part numbers, quantities needed, and other technical specifications. The parts are for the engine, fuel system, valves, pistons, bearings, gears, and other internal components. The document provides replacement and overhaul instructions for the different tractor models and engine types.
Mc cormick bmax tier 3 (2011 ) - rt64 - 100 tractor service repair manualfdusjejkskem
This document contains parts information for engines and components. It lists part numbers, descriptions, and indicates whether parts are for replacement or reference purposes. Serial or engine numbers are referenced for some parts to indicate applicability. Kit designations and tolerance specifications are also provided for some items.
Mc cormick bmax tier 3 (2011 ) - rt64 - 90 tractor service repair manualfdusjejkskem
This document provides parts information for an engine, including:
- Part numbers, serial numbers, replacement kits, and other identifying information for various engine components
- Quantity and other specification information for replacements
- Notes on components that are part of assemblies and not individually serviced
The parts cover multiple engine models and ranges of serial numbers.
Mc cormick bmax tier 3 (2011 ) - rt64 - 80 tractor service repair manualfdusjejkskem
This document contains parts listings and component information for an engine. It includes over 125 individual part listings with information like part numbers, serial numbers, replacement parts, and component types. The parts are for items like the cylinder block, pistons, valves, pumps, sensors and other engine components.
Mc cormick bmax (2007 ) - rt62 - 100 tractor service repair manualfdusjejkskem
This document provides part numbers and component information for engine repairs. It includes listings of parts, part numbers, kits, and specifications needed to repair items like cylinders, pistons, pumps, housings, and other engine components. Quantities of parts and application ranges based on tractor serial numbers are also provided. The document appears to be from an engine repair manual or parts catalog.
Mc cormick 9 7 series (2014- ) - rs37 - 7070 - 7080 arm tractor service repai...fdusjejkskem
This document contains parts listings and diagrams for components of McCormick RS37 model 7070 and 7080 engines. It lists part numbers, names, and other identifying information for items like blocks, heads, crankcases, manifolds, and other internal engine parts. Notes provide information on applications, specifications like lengths and diameters, and whether parts are replacement options. The parts are depicted visually in diagrams to show their place in the engine assembly.
Mc cormick (2011 ) - rs43 - 6450 ism-vrm tractor service repair manualfdusjejkskem
This document provides part numbers and descriptions for components that make up various tractor assemblies. It includes information like part names and numbers, quantities needed, and application details. Replacement part designations and quantities per tractor are also provided for some items. Images are referenced for additional information.
Komatsu wa250 6 wheel loader service repair manual sn75001 and upfdusjejkskem
This document provides information about Komatsu wheel loaders, including:
- The shop manual covers models WA250-6 and WA250PZ-6.
- Specifications for the engines, cooling systems, power trains, steering systems, brake systems, hydraulics systems, and other components are included.
- Standard values, testing and adjustment procedures, and troubleshooting information is provided.
- Failure codes, fuse locations, and other diagnostic information is listed to assist with repairs.
Komatsu d31 pl 20 dozer bulldozer service repair manualfdusjejkskem
This shop manual provides instructions for maintenance and repair of Komatsu bulldozers. It details the removal and installation procedures for components like the starting motor and alternator. Safety precautions are outlined, emphasizing the importance of following proper service procedures, wearing protective equipment, and taking safety measures like blocking equipment before starting work. The manual contents include general information, structure and function, testing and adjusting, disassembly and assembly, and maintenance standards.
Komatsu d31 p 20a dozer bulldozer service repair manualfdusjejkskem
This shop manual provides instructions for maintenance and repair of Komatsu bulldozers. It details the disassembly and assembly procedures for components like the starting motor and alternator. Safety precautions are outlined, emphasizing the importance of following proper service procedures, wearing protective equipment, and taking safety measures like blocking equipment before starting work. The manual contents include general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other sections.
Komatsu d31 p 20 dozer bulldozer service repair manualfdusjejkskem
- The document is a shop manual that provides instructions for maintenance and repair of Komatsu bulldozers.
- It contains safety notices and general precautions for working on equipment. Proper personal protective equipment and safety procedures are emphasized.
- The document is divided into sections covering general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics.
- Specific instructions are provided for removal and installation of components like the starting motor and alternator. Torque specifications and other details are given.
Komatsu d31 e 20 dozer bulldozer service repair manualfdusjejkskem
This document provides instructions for servicing components of Komatsu bulldozers, including removal and installation of the starting motor, alternator, and engine oil cooler core. Key steps include disconnecting battery cables and electrical connections, loosening mounting hardware, and reinstalling components in reverse order while following tightening specifications and adjusting components as needed. Safety precautions are provided to prevent injury when working on pressurized systems and around moving parts.
Komatsu d21 a,p 8 dozer bulldozer service repair manual (sn 83001 and up)fdusjejkskem
This shop manual provides instructions for servicing a Komatsu D21A, P-8 bulldozer with a serial number of 83001 or higher. The manual contains sections on general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics. This section specifically describes how to remove the fuel injection pump assembly. It outlines 14 steps to disconnect hoses, remove mounting nuts, and take note of alignment marks to ensure proper reinstallation of the fuel injection pump and related components. Precautions are provided to prevent dropping parts and maintaining proper alignment of gears.
Komatsu 12 v170 1 diesel engine service repair manualfdusjejkskem
This shop manual provides instructions for servicing a Komatsu 12v17 diesel engine. It contains sections on the engine's structure and function, testing and adjusting procedures, disassembly and assembly instructions, maintenance standards, and repair/replacement of parts. Technicians are advised to follow the safety precautions outlined and contact their distributor for the latest revision of the manual.
John deere 500 trail buck utility atv service repair manual (tm2160)fdusjejkskem
This technical manual provides repair and maintenance instructions for the Trail Buck Utility ATV. It contains sections covering specifications, identification numbers, tools, component locations, schematics, theory of operation, diagnostics, tests, repairs and other topics. The manual is intended for experienced technicians and is organized so that information on each system is kept together. Safety precautions are outlined at the beginning, including proper lifting of equipment, handling of fluids, battery safety, protective clothing, and more. Procedures for front drive shaft removal and installation are also described.
John deere 500 buck utility atv service repair manual (tm2153)fdusjejkskem
The document is a technical manual section about front drive repair for a John Deere utility ATV. It includes instructions for removing and installing the front drive shaft, including inspecting the drive shaft boots. It also provides procedures for removing and installing the front differential, including how to measure and adjust the differential backlash. Images and diagrams accompany the text to illustrate the procedures. Safety information is included at the beginning to warn technicians to support the vehicle properly when working underneath.
John deere 315 d side shift loader service repair technical manual (tm1497)fdusjejkskem
- The document provides repair information for the reverser, reverse brake, forward clutch, and planetary assembly of 300D, 310D, and 315D backhoe loaders.
- It describes how to remove and disassemble the front cover and reverse brake, including inspecting parts for wear.
- Procedures are provided for removing and disassembling the input shaft and forward clutch, and removing the planetary assembly and bearing retainer.
- Detailed step-by-step instructions are given for assembling the input shaft and forward clutch.
John deere 314 f walk behind tillers service repair manual (tm1687)fdusjejkskem
This technical manual provides instructions for servicing John Deere walk-behind tillers models 314F, 518R, and 820R. It contains sections on specifications, components, schematics, troubleshooting, repairs, and safety information. The manual is intended for experienced technicians and organized with headings to guide readers to relevant information for completing jobs. It also provides contact information for feedback to improve future manuals.
John deere 310 d backhoe loaders service repair technical manual (tm1497)fdusjejkskem
- The document provides repair information for the reverser, reverse brake, forward clutch, and planetary assembly of 300D, 310D, and 315D backhoe loaders.
- It describes removing and disassembling the front cover and reverse brake, removing and disassembling the input shaft and forward clutch, and removing the planetary assembly and bearing retainer.
- Step-by-step instructions are given for assembling the input shaft and forward clutch.
John deere 35 g (sn. from k270001) compact excavator service repair technical...fdusjejkskem
The document provides instructions for removing and installing a sprocket, front idler, track adjuster, and recoil spring on an excavator. It describes removing components like the track and cap screws holding parts in place. Precautions are outlined and specifications provided for torque values and part weights. Detailed steps cover disassembling, inspecting, lubricating, and reassembling parts like the front idler and track adjuster using specialized tools.
John deere 4x2 and 4x6 gator utility vehicle service repair manual (tm1518)fdusjejkskem
This document provides specifications and information related to the power train and gear system for John Deere Gator utility vehicles. It includes specifications such as drive belt width, clutch engagement speeds, secondary clutch spring torque specifications, chain tension for 6x4 models, chain size and length for 6x4 models, and torque specifications for secondary clutch mounting cap screws. The document is intended as a technical reference for experienced technicians working on these vehicle systems.
Liebherr r954 c 1328 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1276 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of hazards.
Liebherr r954 c 1175 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1128 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1120 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r944 c 1000 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of hazards.
Liebherr r944 c 793 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Komatsu d31 pl 20 dozer bulldozer service repair manualfdusjejkskem
This shop manual provides instructions for maintenance and repair of Komatsu bulldozers. It details the removal and installation procedures for components like the starting motor and alternator. Safety precautions are outlined, emphasizing the importance of following proper service procedures, wearing protective equipment, and taking safety measures like blocking equipment before starting work. The manual contents include general information, structure and function, testing and adjusting, disassembly and assembly, and maintenance standards.
Komatsu d31 p 20a dozer bulldozer service repair manualfdusjejkskem
This shop manual provides instructions for maintenance and repair of Komatsu bulldozers. It details the disassembly and assembly procedures for components like the starting motor and alternator. Safety precautions are outlined, emphasizing the importance of following proper service procedures, wearing protective equipment, and taking safety measures like blocking equipment before starting work. The manual contents include general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other sections.
Komatsu d31 p 20 dozer bulldozer service repair manualfdusjejkskem
- The document is a shop manual that provides instructions for maintenance and repair of Komatsu bulldozers.
- It contains safety notices and general precautions for working on equipment. Proper personal protective equipment and safety procedures are emphasized.
- The document is divided into sections covering general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics.
- Specific instructions are provided for removal and installation of components like the starting motor and alternator. Torque specifications and other details are given.
Komatsu d31 e 20 dozer bulldozer service repair manualfdusjejkskem
This document provides instructions for servicing components of Komatsu bulldozers, including removal and installation of the starting motor, alternator, and engine oil cooler core. Key steps include disconnecting battery cables and electrical connections, loosening mounting hardware, and reinstalling components in reverse order while following tightening specifications and adjusting components as needed. Safety precautions are provided to prevent injury when working on pressurized systems and around moving parts.
Komatsu d21 a,p 8 dozer bulldozer service repair manual (sn 83001 and up)fdusjejkskem
This shop manual provides instructions for servicing a Komatsu D21A, P-8 bulldozer with a serial number of 83001 or higher. The manual contains sections on general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics. This section specifically describes how to remove the fuel injection pump assembly. It outlines 14 steps to disconnect hoses, remove mounting nuts, and take note of alignment marks to ensure proper reinstallation of the fuel injection pump and related components. Precautions are provided to prevent dropping parts and maintaining proper alignment of gears.
Komatsu 12 v170 1 diesel engine service repair manualfdusjejkskem
This shop manual provides instructions for servicing a Komatsu 12v17 diesel engine. It contains sections on the engine's structure and function, testing and adjusting procedures, disassembly and assembly instructions, maintenance standards, and repair/replacement of parts. Technicians are advised to follow the safety precautions outlined and contact their distributor for the latest revision of the manual.
John deere 500 trail buck utility atv service repair manual (tm2160)fdusjejkskem
This technical manual provides repair and maintenance instructions for the Trail Buck Utility ATV. It contains sections covering specifications, identification numbers, tools, component locations, schematics, theory of operation, diagnostics, tests, repairs and other topics. The manual is intended for experienced technicians and is organized so that information on each system is kept together. Safety precautions are outlined at the beginning, including proper lifting of equipment, handling of fluids, battery safety, protective clothing, and more. Procedures for front drive shaft removal and installation are also described.
John deere 500 buck utility atv service repair manual (tm2153)fdusjejkskem
The document is a technical manual section about front drive repair for a John Deere utility ATV. It includes instructions for removing and installing the front drive shaft, including inspecting the drive shaft boots. It also provides procedures for removing and installing the front differential, including how to measure and adjust the differential backlash. Images and diagrams accompany the text to illustrate the procedures. Safety information is included at the beginning to warn technicians to support the vehicle properly when working underneath.
John deere 315 d side shift loader service repair technical manual (tm1497)fdusjejkskem
- The document provides repair information for the reverser, reverse brake, forward clutch, and planetary assembly of 300D, 310D, and 315D backhoe loaders.
- It describes how to remove and disassemble the front cover and reverse brake, including inspecting parts for wear.
- Procedures are provided for removing and disassembling the input shaft and forward clutch, and removing the planetary assembly and bearing retainer.
- Detailed step-by-step instructions are given for assembling the input shaft and forward clutch.
John deere 314 f walk behind tillers service repair manual (tm1687)fdusjejkskem
This technical manual provides instructions for servicing John Deere walk-behind tillers models 314F, 518R, and 820R. It contains sections on specifications, components, schematics, troubleshooting, repairs, and safety information. The manual is intended for experienced technicians and organized with headings to guide readers to relevant information for completing jobs. It also provides contact information for feedback to improve future manuals.
John deere 310 d backhoe loaders service repair technical manual (tm1497)fdusjejkskem
- The document provides repair information for the reverser, reverse brake, forward clutch, and planetary assembly of 300D, 310D, and 315D backhoe loaders.
- It describes removing and disassembling the front cover and reverse brake, removing and disassembling the input shaft and forward clutch, and removing the planetary assembly and bearing retainer.
- Step-by-step instructions are given for assembling the input shaft and forward clutch.
John deere 35 g (sn. from k270001) compact excavator service repair technical...fdusjejkskem
The document provides instructions for removing and installing a sprocket, front idler, track adjuster, and recoil spring on an excavator. It describes removing components like the track and cap screws holding parts in place. Precautions are outlined and specifications provided for torque values and part weights. Detailed steps cover disassembling, inspecting, lubricating, and reassembling parts like the front idler and track adjuster using specialized tools.
John deere 4x2 and 4x6 gator utility vehicle service repair manual (tm1518)fdusjejkskem
This document provides specifications and information related to the power train and gear system for John Deere Gator utility vehicles. It includes specifications such as drive belt width, clutch engagement speeds, secondary clutch spring torque specifications, chain tension for 6x4 models, chain size and length for 6x4 models, and torque specifications for secondary clutch mounting cap screws. The document is intended as a technical reference for experienced technicians working on these vehicle systems.
Liebherr r954 c 1328 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1276 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of hazards.
Liebherr r954 c 1175 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1128 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1120 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r944 c 1000 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of hazards.
Liebherr r944 c 793 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. 15 - Engine
60 - Oil Pump
00 - General
15 - 209 9813/7300-2 15 - 209
00 - General
Introduction .................................................. 15-209
Component Identification ............................. 15-210
Remove and Install ..................................... 15-212
Introduction
The oil pump is a rotor type pump located inside the
timing gear case. The pump is driven by gears via
the crankshaft.
The pump consists of two rotors, one running inside
the other. The outer rotor has one more lobe than the
inner rotor and turns on a different axis.
When rotated the gap between the inner and outer
rotor lobes increases, drawing oil in through the
inlet port. After a half rotation the gap reaches a
maximum, the inlet port is closed and the outlet port
opens.
Further rotation causes the gap between the lobes to
diminish, forcing the oil out through the outlet port.
A pressure relief valve assembly is integral with the
pump body. As oil pressure increases it acts on a
spool to overcome the pressure of the spring. As the
spool moves it uncovers a port allowing pressurised
oil directly back to the inlet port. In practice the
spool is continually opening and closing to maintain
the correct oil pressure value. The valve is not
adjustable.
3. 15 - Engine
60 - Oil Pump
00 - General
15 - 210 9813/7300-2 15 - 210
Component Identification
Figure 203.
1
1 3 2 4
49
6
1
7 7a
8 8a
5
5
1 Oil pump 2 Outer rotor
3 Inner rotor 4 Inlet port
5 Outlet port 6 Relief valve assembly
7 Relief valve spring 7a Relief valve port (return to inlet port 4)
8 Relief valve spool 8a Relief valve pressure port (connected to port 5)
9 Oil pump connecting ports (engine bed plate)
4. 15 - Engine
60 - Oil Pump
00 - General
15 - 211 9813/7300-2 15 - 211
Figure 204.
10
10 CCV Anti drain back valve
5. 15 - Engine
60 - Oil Pump
00 - General
15 - 212 9813/7300-2 15 - 212
Remove and Install
Special Tools
Description Part No. Qty.
Torque Wrench
(10-100Nm)
993/70111 1
The illustrations show the engine inverted. If the
oil pump is being removed prior to crankshaft or
camshaft removal, the engine must be inverted. If
the oil pump only is being removed (for inspection or
renewal) then the engine need not be inverted.
This procedure requires service parts. Make sure
you have obtained the correct service parts before
you start, refer to Parts Catalogue.
Before Removal
1. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
2. Drain the oil from the engine, refer to (PIL 15-21).
3. Remove the starter motor, refer to (PIL 15-75).
4. Remove the flywheel, refer to (PIL 15-54).
5. Remove the flywheel housing, refer to (PIL
15-54).
Figure 205.
X
Y
2
1
34
1 Oil pump 2 Oil pump fixing bolts (x4)
3 Flywheel hub 4 Flywheel hub fixing bolt
X Crankshaft gear Y Oil pump location dowel
6. 15 - Engine
60 - Oil Pump
00 - General
15 - 213 9813/7300-2 15 - 213
Remove
1. Remove the flywheel hub fixing bolt.
2. Remove the flywheel hub. DO NOT remove the
crankshaft gear.
3. Remove the oil pump fixing bolts and lift the oil
pump away from the timing gear case.
The oil pump is a non-serviceable item. If the oil
pump is damaged or worn it must be renewed as a
complete assembly.
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Make sure that all parts are clean and free from
damage and corrosion.
3. Lubricate the pump rotor with clean engine oil.
4. Make sure that the oil pump location dowel
locates into the hole in the gear timing case.
5. Install the flywheel hub into the crankshaft gear,
locating on the dowel. Tighten the bolts to the
correct torque value.
Special Tool: Torque Wrench (10-100Nm) (Qty.:
1)
After Replacement
1. Install the flywheel housing, refer to (PIL 15-54).
2. Install the flywheel to the crankshaft hub, refer to
(PIL 15-54).
3. Install the starter motor, refer to (PIL 15-75).
4. Fill the engine with engine oil, refer to (PIL
15-21).
Table 87. Torque Values
Item Nm
2 24
4 47
7. 15 - Engine
63 - Mount
00 - General
15 - 215 9813/7300-2 15 - 215
00 - General
Introduction .................................................. 15-215
Check (Condition) ........................................ 15-216
Remove and Install ..................................... 15-217
Introduction
Engine mounts support the engine and in some
cases the transmission, they dampen noise and
vibration. The mounts isolate the engine and
transmission from the chassis so that vibrations and
noise are not transmitted to the rest of the machine.
Most engine mounts consist of metal attachment
plates and large rubber insulator blocks. The rubber
portions of the mount are flexible and provide the
cushioning that dampens the engine vibrations.
The metal bracket part of the mount provides the
mechanical support and attachment points for the
engine mounts.
8. 15 - Engine
63 - Mount
00 - General
15 - 216 9813/7300-2 15 - 216
Check (Condition)
1. Check the condition of the four engine
mountings. Make sure that all the fixing bolts
are secure and tightened to the correct torque
values.
2. Make sure that the mounting components are
free from defects such as splits or cracks.
Replace defective components as necessary.
Figure 206.
A B CA
A B CA
A Engine mountings
B Fixing bolts (M20)
C Fixing bolts (M16)
Table 88. Torque Values
Item Nm
B 476
C 244
9. 15 - Engine
63 - Mount
00 - General
15 - 217 9813/7300-2 15 - 217
Remove and Install
Consumables
Description Part No. Size
4101/0250 0.01LJCB Threadlocker
and Sealer (Medium
Strength)
4101/0251 0.05L
Before Removal
1. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
2. Position the machine on firm level ground. Make
the machine safe. Refer to (PIL 01-03).
3. Get access to the engine.
Remove
1. Remove the bolt 1 or bolt 2 (as applicable) and
its associated plate, washer and nut from the
applicable engine mount.
2. Remove the engine. Refer to (PIL 15-00).
Alternatively use suitable lifting equipment to
take the weight of the engine and hydraulic
pump.
2.1. Do not remove an engine mount unless the
weight of the engine is safely supported.
2.2. Remove and install only one engine mount
at a time.
3. Remove the four bolts 3 or bolts 4 at the
applicable mounting casting.
4. Remove the upper rubber.
5. Remove the lower rubber.
5.1. The lower rubber is retained in the mounting
casting with adhesive.
10. 15 - Engine
63 - Mount
00 - General
15 - 218 9813/7300-2 15 - 218
Figure 207.
X
A
A
B
B
D
C
E
F
G
H
Y
A Bolts 1 B Bolts 2
C Bolts 3 D Bolts 4
E Plate F Upper rubber
G Mounting casting H Lower rubber
X Hydraulic pump end of the engine Y Cooling fan end of the engine
11. 15 - Engine
63 - Mount
00 - General
15 - 219 9813/7300-2 15 - 219
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Use suitable adhesive to retain the lower rubber
in the applicable mounting casting.
3. Apply retaining compound to bolts 3 and bolts 4.
Consumable: JCB Threadlocker and Sealer
(Medium Strength)
4. Tighten bolts 1, bolts 2, bolts 3 and bolts 4 to the
correct torque value.
Table 89. Torque Values
Item Nm
A 529
B 271
C 125
D 125
12. 15 - Engine
69 - Oil Cooler
00 - General
15 - 221 9813/7300-2 15 - 221
00 - General
Introduction .................................................. 15-221
Component Identification ............................. 15-222
Operation ..................................................... 15-222
Check (Condition) ........................................ 15-223
Remove and Install ..................................... 15-223
Disassemble and Assemble ........................ 15-225
Introduction
Oil Cooler Assembly
The oil cooler and filter are incorporated in a housing
that is bolted to the side of the crankcase. The
housing allows transfer of lubricating oil from the
crankcase to the oil cooler and filter head.
Some installations have a remote oil filter head. The
oil cooler housing incorporates feed and return ports
for hose connections to the filter head. A remote
oil filter head is used when access to the engine is
restricted.
Oil Cooler Matrix
The oil cooler matrix is a non-serviceable part and
must not be removed from the housing. The housing/
cooler assembly is leak tested during manufacture to
minimise the risk of cross contamination of coolant
and lubricating oil.
13. 15 - Engine
69 - Oil Cooler
00 - General
15 - 222 9813/7300-2 15 - 222
Component Identification
Figure 208.
1
1 Oil cooler housing
Figure 209.
4
1
2
3
1
8
7 6 5
1 Oil cooler housing
2 Oil cooler matrix
3 Sealing gasket (housing to crankcase)
4 Coolant gallery
5 Oil gallery (from cooler to filter head)
6 Oil fill port
7 Oil gallery (from filter head to main oil gallery)
8 Oil gallery (from pump to cooler)
Operation
The oil cooler housing allows transfer of lubricating
oil from the crankcase to the oil cooler and filter head.
The coolant also transfers to the housing and passes
over the oil cooler matrix causing heat to exchange
from the oil to the coolant.
The cooled and filtered oil then passes back into the
main oil gallery into the crankcase.
An engine oil filler point is also included via cap and
port which aligns with a port in the crankcase.
14. 15 - Engine
69 - Oil Cooler
00 - General
15 - 223 9813/7300-2 15 - 223
Check (Condition)
1. Inspect the sealing faces on the oil cooler matrix,
oil cooler housing and the crankcase. Make sure
that the faces are clean and free from scale or
damage.
2. Inspect the sealing gasket and o-rings for signs
of damage. If in doubt, renew the gasket or O-
rings.
Remove and Install
Before Removal
1. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
2. Drain the coolant, refer to (PIL 21-00).
3. Remove the oil filter, refer to (PIL 15-21).
Figure 210.
BA
D
E
E
C
A Oil cooler housing (integral oil filter head)
B Oil cooler housing fixing bolts (x10)
C Oil filter head
D Oil cooler housing (remote oil filter head)
E Remote oil filter head hose ports
Remove
1. Get access to the engine.
2. If applicable, disconnect the electrical connectors
at the oil pressure switch and the oil temperature
sensor.
3. If applicable, label and disconnect the electrical
connectors at the ECM (Engine Control Module).
Do not touch the electrical pins on the ECM.
Cap the connectors on the harnesses and the
15. 15 - Engine
69 - Oil Cooler
00 - General
15 - 224 9813/7300-2 15 - 224
ECM to prevent ingress of oil and coolant. Tie the
harnesses away from the oil cooler housing.
4. If applicable disconnect the remote oil filter head
hoses from the ports on the oil cooler.
5. Remove the bolts and lift the oil cooler housing
away from the crankcase. DO NOT attempt to
remove the oil cooler matrix from the oil cooler
housing.
If there is cross contamination of coolant and
lubricating oil, the oil cooler matrix may be faulty. If a
faulty matrix is suspected renew the matrix and the
seals.
Figure 211.
B
A
C
A Oil cooler housing
B Oil cooler matrix
C Sealing gasket
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Make sure that sealing gasket is undamaged and
correctly located in its groove. A faulty gasket will
cause cross contamination of the lubricating oil
and coolant. If in doubt install a new gasket.
3. Tighten the bolts to the correct torque value.
After Installation
1. If applicable, install the oil filter, refer to (PIL
15-21).
2. Refill the cooling system with the recommended
coolant mixture, refer to (PIL 21-00).
3. If applicable, make sure that the harness
connectors are connected to the correct
connectors on the ECM.
4. Start the engine and check for oil and coolant
leaks.
Table 90. Torque Values
Item Description Nm
B Bolts 24
16. 15 - Engine
69 - Oil Cooler
00 - General
15 - 225 9813/7300-2 15 - 225
Disassemble and Assemble
Dismantling of the oil cooler and oil filter head
assembly is not necessary unless the oil cooler
matrix or the seals are faulty.
Disassemble
1. Remove the four fixing bolts and lift off the oil
cooler matrix.
2. Remove and discard the two sealing O-rings.
3. Remove the sealing gasket.
Figure 212.
B
A
C
C
D
A
E
A
A
A
A Fixing bolts
B Oil cooler matrix
C O-rings
D Sealing gasket
E Oil cooler housing
Inspect
1. Refer to Oil Cooler - Check Condition.
Assemble
1. Locate the new O-rings. Install the oil cooler
matrix. Tighten the bolts to the correct torque
value.
2. Install the sealing gasket to the oil cooler
housing.
Table 91. Torque Values
Item Nm
A 23
17. 15 - Engine
72 - Alternator
00 - General
15 - 227 9813/7300-2 15 - 227
00 - General
Introduction .................................................. 15-227
Health and Safety ........................................ 15-228
Technical Data ............................................. 15-228
Component Identification ............................. 15-229
Operation ..................................................... 15-229
Diagram ....................................................... 15-231
Check (Condition) ........................................ 15-232
Remove and Install ..................................... 15-232
Disassemble and Assemble ........................ 15-233
Introduction
The alternator is a three phase generator having a
rotating field winding and static power windings.
When the ignition switch is turned on, the current
from the battery flows by way of the No Charge
warning light to the field winding. This creates
a magnetic field which supplements the residual
magnetism in the rotor poles. As the engine is
started, the FEAD (Front End Accessory Drive)
belt drives the rotor and the alternating current is
generated in the power windings as they are cut by
the rotating magnetic field. Output is controlled by a
solid state regulator which varies the field current in
accordance with electrical demand.
18. 15 - Engine
72 - Alternator
00 - General
15 - 228 9813/7300-2 15 - 228
Health and Safety
• Ensure that the battery negative terminal is
connected to the earthing cable.
• Never make or break connections to the battery
or alternator, or any part of the charging circuit
whilst the engine is running. Disregarding this
instruction will result in damage to the regulator
or rectifying diodes.
• Main output cables are 'live' even when the
engine is not running. Take care not to earth
connectors in the moulded plug if it is removed
from the alternator.
• During arc welding on the machine, protect the
alternator by removing the moulded plug (or if
separate output cables installed, remove the
cables).
• If slave starting is necessary, connect the
second battery in parallel without disconnecting
the vehicle battery from the charging circuit.
The slave battery may then be safely removed
after a start has been obtained. Take care to
connect batteries positive to positive, negative
to negative.
Technical Data
Technical data may differ between machine variants
and installations. For full data relating to the
alternator refer to the applicable parts information.
19. 15 - Engine
72 - Alternator
00 - General
15 - 229 9813/7300-2 15 - 229
Component Identification
Figure 213.
D
A Alternator
B Regulator and brush assembly
C Drive pulley
D Tie bolts
Operation
When the ignition key is moved to the start position a
24V supply connects to the alternator at terminal R.
The voltage provides a field current to the alternator
windings through the voltage regulator.
Figure 214. Connector Posts (C042)
W
L
R
B+
Table 92.
Pins Details
R To ignition relay C033
(24V)
L Alternator output voltage
B+ Battery voltage (24V)
When the engine is running the output from the
trio diode rectifier is fed to a regulator which now
provides the field current.
Although the alternator circuit is self sustaining
once the engine is running, do not disconnect or
isolate the batteries. Disconnection or isolation of
the batteries while the engine is running can cause
severe damage to the machine electrical systems.
The regulator changes the field current depending on
the load from the machine electrical system.
Power from the alternator is fed into the machine
circuits and to charge the batteries via a primary fuse.
The L terminal is connected to the MECU (Machine
Electronic Control Unit) which monitors the voltage
output from the alternator. The MECU broadcasts the
value of the voltage output on the CAN (Controller
Area Network)bus. If the voltage is too high or too low
the MECU broadcasts a fault code on the CANbus.
20. 15 - Engine
72 - Alternator
00 - General
15 - 230 9813/7300-2 15 - 230
The charging voltage is displayed on the display
monitor in the machine status screen.
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. 15 - Engine
72 - Alternator
00 - General
15 - 231 9813/7300-2 15 - 231
Diagram
Charging Electrical Circuit
Figure 215.
3018
2000
3000
3015
3014
C100
C042
C015
C030
MECU (J1)
A B
C
A Battery 1 B Battery 2
C Starter motor C025 MECU (Machine Electronic Control Unit)
C042 Alternator C100 Fuse and relay PCB (Printed Circuit
Board)
23. 15 - Engine
72 - Alternator
00 - General
15 - 232 9813/7300-2 15 - 232
Check (Condition)
Inspect the alternator installation as follows:
1. Check the security of the alternator to engine
fixing.
2. Check that the electrical connections at the
alternator are clean and secure.
3. Repair or replace related electrical cables, wiring
and connectors if they are defective.
4. Check the alternator drive pulley security.
5. Check the condition and adjustment of the drive
belt.
6. Start the engine and check the machine
instrumentation for electrical charging fault
warnings.
7. If applicable check the fault log for electrical
charging related faults. Refer to PIL (33-57).
Remove and Install
Figure 216. Alternator location
Remove
1. Disconnect the negative (-) lead followed by the
positive (+) lead from the battery terminals.
2. Remove the alternator (accessory) drive belt.
3. Disconnect the electrical leads from the
alternator terminals. Label the leads to make
sure that they are installed in the correct positions
on assembly.
4. Undo the alternator securing bolts and lift the
alternator away from the cylinder block mounting.
Figure 217.
B
A
B
A Alternator
B Securing bolts
Inspect
1. Check the brushes for wear. Renew the brushes
if the length is less than
Length/Dimension/Distance: 8mm
24. 15 - Engine
72 - Alternator
00 - General
15 - 233 9813/7300-2 15 - 233
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. It is not necessary to adjust the position of the
alternator in order to tension the drive belt, as
the accessory drive belt arrangement is self-
tensioning.
3. Tighten the alternator securing bolts to the
correct torque value.
4. Make sure you reconnect the electrical leads to
the alternator in the correct positions and tighten
to the correct torque.
Table 93. Alternator securing bolt torque
Item Torque Value
A 47N·m
B 47N·m
Figure 218.
L
Table 94. Alternator electrical connection torque
Item Torque Value
B+ 9–13N·m
L 2.7–3.8N·m
W 2.7–3.8N·m
Disassemble and Assemble
Voltage Regulator and Brushes
1. The voltage regulator and brush set is a
combined assembly. Refer to (PIL 15-72-06).
Drive Pulley
1. Refer to (PIL 15-72-03).