This service manual provides instructions for servicing the roller, JCB116, JCB116D, JCB116DD, and VM116 models. It contains 15 chapters covering various systems of the machine like the engine, fuel system, cooling system, brakes, steering, hydraulics, and electrical systems. The chapter on the crankshaft provides details on checking, removing, and installing the crankshaft. It describes lubrication of the crankshaft and checking components like the main bearing shells. Removal and installation procedures are outlined along with part numbers for required consumables.
Jcb js200 t4 f excavator service repair manual (from 2424851 to 2425350)dfujsjjekme
This service manual provides instructions for servicing and repairing excavators models JS200, JS210, JS220, and JS235. It contains sections covering the entire machine including the engine, fuel system, cooling system, driveline, hydraulics, electrical system, and other components. The document provides detailed procedures, diagrams, specifications, and part numbers needed for maintenance and repairs. Safety warnings are included throughout advising technicians to read and understand instructions before working on the machine.
New holland we190 b wheeled excavator service repair manualfisejfjsekfksem
This document is a service manual for Wheeled Excavators models WE170B and WE190B. It contains instructions for repair and maintenance work that must be carried out by qualified personnel using the specified procedures and tools. The manufacturer will not be responsible for damages caused by using unapproved parts or failing to follow the proper procedures. The manual is divided into sections covering the engine, transmission, hydraulic and electrical systems, frames, steering, wheels, cab controls and more. It provides information to service these various components of the excavators.
New holland w170 c tier 4b wheel loader service repair manualfisejfjsekfksem
This service manual provides maintenance and repair instructions for the W170C Wheel Loader. It contains 19 chapters covering the engine, transmission, axles, brakes, hydraulics, frames, steering, wheels, cab climate control, and electrical systems. Safety must be the top priority when servicing equipment, and only authorized personnel should perform repairs. Personal protective equipment should be worn, and all safety messages and instructions must be followed carefully.
New holland w70 btc wheel loader service repair manualfisejfjsekfksem
This document provides safety instructions and technical specifications for a repair manual. It outlines general safety precautions for working on equipment, including stopping the engine and relieving hydraulic pressure before removing parts. Emergency procedures and required safety equipment are also described. Technical specifications and contact information are provided for questions.
New holland tl100 a tractor service repair manualfisejfjsekfksem
This document is a service manual for tractor models TL70A through TL100A. It contains sections on general guidelines, the engine, clutch, transmissions, and other systems. Each section provides specifications, views of components, troubleshooting information, and procedures for removal, installation, overhaul, and adjustment of parts.
New holland td5050 tractor service repair manualfisejfjsekfksem
This document is a service manual for TD series tractor models TD5010 through TD5050. It contains sections covering general information, the engine, clutch, gearbox, transmission, brakes, hydraulics, steering, axles, auxiliary equipment, electrical systems, and the cab. Each section provides specifications, diagrams, troubleshooting information, removal and installation instructions, and repair procedures for the various systems. Safety warnings are provided, noting that maintenance and repair should only be performed by trained technicians using the proper tools and following the instructions carefully.
New holland t8030 tractor service repair manualfisejfjsekfksem
This document provides a service manual for tractor models T8010 through T8050. It describes the primary hydraulic power system, including the three hydraulic pumps that are driven by the transmission. A pressure and flow compensating piston pump supplies hydraulic flow to priority valves and then to steering, remote valves, and the three point hitch. A dual gear pump has front and rear sections, with the front supplying regulated pressure and the rear providing charge flow to the piston pump. An optional high flow piston pump is also described that provides increased hydraulic flow.
New holland t6060 tractor service repair manualfisejfjsekfksem
The document is a service manual that covers hydraulic, pneumatic, electrical, and electronic systems for tractor models T6010 through T6070. It contains sections on primary and secondary hydraulic power systems, hydraulic command systems, electrical power systems, electronic systems, fault codes, engines, transmissions, axles, brakes, frames, cabs, hitches, and more. Each section contains technical data, functional descriptions, diagnostics, and service procedures.
Jcb js200 t4 f excavator service repair manual (from 2424851 to 2425350)dfujsjjekme
This service manual provides instructions for servicing and repairing excavators models JS200, JS210, JS220, and JS235. It contains sections covering the entire machine including the engine, fuel system, cooling system, driveline, hydraulics, electrical system, and other components. The document provides detailed procedures, diagrams, specifications, and part numbers needed for maintenance and repairs. Safety warnings are included throughout advising technicians to read and understand instructions before working on the machine.
New holland we190 b wheeled excavator service repair manualfisejfjsekfksem
This document is a service manual for Wheeled Excavators models WE170B and WE190B. It contains instructions for repair and maintenance work that must be carried out by qualified personnel using the specified procedures and tools. The manufacturer will not be responsible for damages caused by using unapproved parts or failing to follow the proper procedures. The manual is divided into sections covering the engine, transmission, hydraulic and electrical systems, frames, steering, wheels, cab controls and more. It provides information to service these various components of the excavators.
New holland w170 c tier 4b wheel loader service repair manualfisejfjsekfksem
This service manual provides maintenance and repair instructions for the W170C Wheel Loader. It contains 19 chapters covering the engine, transmission, axles, brakes, hydraulics, frames, steering, wheels, cab climate control, and electrical systems. Safety must be the top priority when servicing equipment, and only authorized personnel should perform repairs. Personal protective equipment should be worn, and all safety messages and instructions must be followed carefully.
New holland w70 btc wheel loader service repair manualfisejfjsekfksem
This document provides safety instructions and technical specifications for a repair manual. It outlines general safety precautions for working on equipment, including stopping the engine and relieving hydraulic pressure before removing parts. Emergency procedures and required safety equipment are also described. Technical specifications and contact information are provided for questions.
New holland tl100 a tractor service repair manualfisejfjsekfksem
This document is a service manual for tractor models TL70A through TL100A. It contains sections on general guidelines, the engine, clutch, transmissions, and other systems. Each section provides specifications, views of components, troubleshooting information, and procedures for removal, installation, overhaul, and adjustment of parts.
New holland td5050 tractor service repair manualfisejfjsekfksem
This document is a service manual for TD series tractor models TD5010 through TD5050. It contains sections covering general information, the engine, clutch, gearbox, transmission, brakes, hydraulics, steering, axles, auxiliary equipment, electrical systems, and the cab. Each section provides specifications, diagrams, troubleshooting information, removal and installation instructions, and repair procedures for the various systems. Safety warnings are provided, noting that maintenance and repair should only be performed by trained technicians using the proper tools and following the instructions carefully.
New holland t8030 tractor service repair manualfisejfjsekfksem
This document provides a service manual for tractor models T8010 through T8050. It describes the primary hydraulic power system, including the three hydraulic pumps that are driven by the transmission. A pressure and flow compensating piston pump supplies hydraulic flow to priority valves and then to steering, remote valves, and the three point hitch. A dual gear pump has front and rear sections, with the front supplying regulated pressure and the rear providing charge flow to the piston pump. An optional high flow piston pump is also described that provides increased hydraulic flow.
New holland t6060 tractor service repair manualfisejfjsekfksem
The document is a service manual that covers hydraulic, pneumatic, electrical, and electronic systems for tractor models T6010 through T6070. It contains sections on primary and secondary hydraulic power systems, hydraulic command systems, electrical power systems, electronic systems, fault codes, engines, transmissions, axles, brakes, frames, cabs, hitches, and more. Each section contains technical data, functional descriptions, diagnostics, and service procedures.
New holland t3030 tractor service repair manualfisejfjsekfksem
This document is a service manual for T3010, T3020, T3030, and T3040 tractor models. It contains sections covering general guidelines, the engine, clutch, transmissions, front and rear mechanical transmissions, and other systems. The manual provides specifications, diagrams, troubleshooting information, removal and installation instructions, and procedures for disassembly, assembly, overhaul and adjustment of components.
New holland t9.480 stage iv tractor service repair manualfisejfjsekfksem
The document outlines various safety rules for operating agricultural equipment, including staying off slopes too steep for safe operation, not exceeding speed ratings, not driving under the influence, ensuring towed loads do not exceed tractor weight limits, and only hitching to the drawbar or using the three-point hitch as intended to avoid rear upset. Personal safety precautions are emphasized such as wearing appropriate protective equipment and not allowing others to ride on equipment. Modifications to equipment could increase debris accumulation risks.
New holland t9.435 tractor service repair manualfisejfjsekfksem
This document is a service manual that provides information on servicing various tractor models including the T9.435, T9.480, T9.530, T9.565, T9.600, T9.645, and T9.700. It contains sections on the engine, transmission, axles, brakes, hydraulics, electrical systems, and other components. Safety information is provided at the beginning regarding servicing equipment. Torque specifications are also included for normal assembly and hydraulics.
New holland t8.410 smart trax powershift transmission (pst) tractor service r...fisejfjsekfksem
This service manual provides information for servicing the engines, transmissions, axles, hydraulics, electrical systems, and other components of T8 tractor models 320-410 with Powershift transmissions. The manual includes specifications, maintenance procedures, and troubleshooting information to assist technicians with repairs and maintenance. Sections cover the engine and its systems, transmission, axles, hydraulics, electrical systems, cab, and other components.
New holland e145 c evo crawler excavator standard w blade version (tier 3) se...fisejfjsekfksem
This document provides a 17 step process to remove an engine from an E145C EVO crawler excavator. The steps include removing the battery cable, counterweight, muffler, pump, fan shroud, fan guard, radiator hoses, connector brackets, connectors, terminal cap, wirings, lines from the compressor, heater hoses, and engine oil remote hoses. Caps and plugs are installed on disconnected parts to prevent entry of water, dust or dirt. The engine and disconnected parts are cleaned before removal to prevent scratches and dirt accumulation.
New holland e17 c mini excavator service repair manualfisejfjsekfksem
The document provides a service manual for removing the engine from a mini excavator. It lists 29 detailed steps for disconnecting all electrical connections, hoses, brackets, and bolts to fully separate the engine from the excavator. Safety warnings are provided throughout regarding hazards such as escaping fluids, heavy lifting, burns, and electrical shocks.
New holland e10 sr mini crawler excavator service repair manualfisejfjsekfksem
Here are the key safety precautions for disassembling and assembling hydraulic equipment from the document:
- Release hydraulic pressure and drain oil from pipes before disconnecting them. Apply plugs to pipe ends.
- Do not disassemble, reassemble or modify hydraulic equipment without permission from the manufacturer. Have qualified personnel perform any necessary work.
- Provide matching marks for reassembly. Read manuals and determine if you can perform the work. Use any required special jigs or tools.
- Inspect disassembled parts for issues like seizure, interference or wear. Measure and record wear and clearances. Repair or replace problematic parts.
- Clean parts thoroughly before reassembly. Always replace removed O-rings
Hyster k005 (h3.50 xm europe) forklift service repair manualfisejfjsekfksem
This document provides repair instructions for various components of a forklift, including the counterweight, hood, overhead guard, LED lights, operator restraint system, and radiator. The counterweight can be removed using lifting eyebolts and a lifting device. Hood and overhead guard removal involves disconnecting mounting hardware. LED light assemblies must be replaced as units rather than repaired. The operator restraint system, including the seat belt and hood latch, must be correctly adjusted and secured. Radiator removal requires draining coolant and disconnecting hoses and mounts.
This document provides repair instructions for various components of a forklift, including the counterweight, hood, overhead guard, LED lights, operator restraint system, and radiator. The counterweight repair section describes how to safely remove and install the counterweight using lifting eyebolts and a lifting device. The radiator repair section explains how to drain the coolant, disconnect hoses, and remove/install the radiator while adding coolant back to the system. Safety warnings are provided throughout regarding stability of the forklift when components that shift the center of gravity are removed.
Hyster f007 h9.00 xm forklift service repair manualfisejfjsekfksem
The document provides instructions for repairing the service frame, counterweight, fenders, hood, hydraulic tank, and other parts of a lift truck. It describes removing and installing the counterweight, fenders, and hydraulic tank. It also details cleaning and repairing the hydraulic tank, including procedures for small leaks, large leaks, and cleaning the tank using steam or chemical solutions. Welding repairs require disconnecting electronics to avoid damage.
Hyster f019 (h360 hd ec) forklift service repair manualfisejfjsekfksem
This document provides repair procedures for a differential assembly. It describes the components of a typical differential, including the housing, ring and pinion gear set, and differential assembly. It provides steps to remove the differential carrier from the axle housing, remove the differential and ring gear from the carrier, and remove the drive pinion and pinion carrier from the carrier. It also describes how to disassemble the differential and ring gear assembly and disassemble the drive pinion and pinion carrier. The document includes warnings and cautions for safe repair.
Hyster f007 h8.00 xm forklift service repair manualfisejfjsekfksem
This document provides instructions for repairing various components of lift trucks, including the counterweight, fenders, hood, hydraulic tank, and other parts. The counterweight and fenders are very heavy and require lifting equipment to remove and install safely. Welding should be done carefully to avoid damaging electronic control modules. Detailed steps are provided for removing, inspecting, and reinstalling each part. Safety warnings are included throughout regarding the heavy weights involved.
Hyster d010 (s35 xm) forklift service repair manualfisejfjsekfksem
The document provides an overview of the components and operation of a single-speed powershift transmission, including:
1) The transmission contains forward and reverse clutch assemblies, a torque converter, transmission pump, control valve, and differential assembly to transfer power from the engine to the wheels.
2) The torque converter uses fluid coupling between an impeller and turbine to transfer power from the engine to the transmission, and can multiply engine torque through a stator clutch mechanism.
3) The forward and reverse clutch assemblies use hydraulic pressure to engage friction discs and transfer power between the input shaft and either the forward or reverse gears to select transmission direction.
Hyster d005 (h80 e europe) forklift service repair manualfisejfjsekfksem
This document provides instructions for servicing GM engines. It describes removing and installing the cylinder head and valve mechanism. Key steps include:
- Disconnecting battery cables and draining coolant before disassembly
- Using a compressor tool to remove the valve springs and related components
- Cleaning carbon from the combustion chambers and valve ports
- Inspecting the cylinder head, valves, valve guides and related components
- Checking clearances and replacing worn parts as needed
- Lapping the valves and valve seats if minor wear is present
Hyster b187 (s3.00 xl europe) forklift service repair manualfisejfjsekfksem
The document provides descriptions and service procedures for the brake system on certain Hyster lift truck models. It describes the components of the service brake assembly, including the master cylinder, wheel cylinders, brake shoes, and parking brake system. Two sizes of service brakes, 260mm and 310mm, are used on the H3.00XL lift trucks. The document outlines procedures for removal and disassembly of the 260mm service brakes, cleaning brake parts, inspecting brake components, and reassembling and installing the 260mm service brakes. Safety warnings are provided throughout regarding handling brake components and preventing asbestos dust.
Hyster a917 (h900 hd) forklift service repair manualfisejfjsekfksem
This document provides repair procedures for differentials used in lift trucks. It describes the components of a typical differential assembly, including the housing, ring and pinion gears, and differential assembly. The procedures describe how to remove the differential carrier from the axle housing, disassemble the differential assembly into its main components, and remove the drive pinion and pinion carrier. Safety warnings and cautions are provided throughout regarding supporting the vehicle, using proper tools, and avoiding damage to parts.
This document provides service information for W8, W9, and W10 series E loaders. It includes sections on general engine specifications, maintenance and lubrication schedules, engine systems like fuel, cooling, and electrical. It also covers servicing procedures for components like the transmission, hydraulics, steering, brakes and mounted equipment. The document contains detailed part numbers, specifications and maintenance intervals to service these loaders.
Case 1021 g tier 4b (final) wheel loader service repair manualfisejfjsekfksem
This service manual provides information for servicing and maintaining Case model 1021G and 1121G wheel loaders that meet Tier 4B emissions standards. The manual includes sections covering the engine, transmission, axles, brakes, hydraulic systems, frames, steering, wheels, cab climate control, and electrical systems. Safety precautions are provided throughout to prevent injury when working on or operating the equipment.
Case 921 g tier 2 wheel loader service repair manualfisejfjsekfksem
This document is a service manual for CNH Industrial wheel loaders models 821G and 921G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for technicians, and stresses the importance of following all safety precautions when working on the equipment.
Case 821 g wheel loader xr eh, new cab tier4b wheel loader service repair manualfisejfjsekfksem
This document is a service manual that provides specifications and repair information for 821G and 921G wheel loaders. It includes sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, and electrical systems. The introduction provides safety information for working on the machines. The manual also includes specifications for the engines, such as displacement, configuration, fuel injection details, performance data, and horsepower ratings.
New holland t3030 tractor service repair manualfisejfjsekfksem
This document is a service manual for T3010, T3020, T3030, and T3040 tractor models. It contains sections covering general guidelines, the engine, clutch, transmissions, front and rear mechanical transmissions, and other systems. The manual provides specifications, diagrams, troubleshooting information, removal and installation instructions, and procedures for disassembly, assembly, overhaul and adjustment of components.
New holland t9.480 stage iv tractor service repair manualfisejfjsekfksem
The document outlines various safety rules for operating agricultural equipment, including staying off slopes too steep for safe operation, not exceeding speed ratings, not driving under the influence, ensuring towed loads do not exceed tractor weight limits, and only hitching to the drawbar or using the three-point hitch as intended to avoid rear upset. Personal safety precautions are emphasized such as wearing appropriate protective equipment and not allowing others to ride on equipment. Modifications to equipment could increase debris accumulation risks.
New holland t9.435 tractor service repair manualfisejfjsekfksem
This document is a service manual that provides information on servicing various tractor models including the T9.435, T9.480, T9.530, T9.565, T9.600, T9.645, and T9.700. It contains sections on the engine, transmission, axles, brakes, hydraulics, electrical systems, and other components. Safety information is provided at the beginning regarding servicing equipment. Torque specifications are also included for normal assembly and hydraulics.
New holland t8.410 smart trax powershift transmission (pst) tractor service r...fisejfjsekfksem
This service manual provides information for servicing the engines, transmissions, axles, hydraulics, electrical systems, and other components of T8 tractor models 320-410 with Powershift transmissions. The manual includes specifications, maintenance procedures, and troubleshooting information to assist technicians with repairs and maintenance. Sections cover the engine and its systems, transmission, axles, hydraulics, electrical systems, cab, and other components.
New holland e145 c evo crawler excavator standard w blade version (tier 3) se...fisejfjsekfksem
This document provides a 17 step process to remove an engine from an E145C EVO crawler excavator. The steps include removing the battery cable, counterweight, muffler, pump, fan shroud, fan guard, radiator hoses, connector brackets, connectors, terminal cap, wirings, lines from the compressor, heater hoses, and engine oil remote hoses. Caps and plugs are installed on disconnected parts to prevent entry of water, dust or dirt. The engine and disconnected parts are cleaned before removal to prevent scratches and dirt accumulation.
New holland e17 c mini excavator service repair manualfisejfjsekfksem
The document provides a service manual for removing the engine from a mini excavator. It lists 29 detailed steps for disconnecting all electrical connections, hoses, brackets, and bolts to fully separate the engine from the excavator. Safety warnings are provided throughout regarding hazards such as escaping fluids, heavy lifting, burns, and electrical shocks.
New holland e10 sr mini crawler excavator service repair manualfisejfjsekfksem
Here are the key safety precautions for disassembling and assembling hydraulic equipment from the document:
- Release hydraulic pressure and drain oil from pipes before disconnecting them. Apply plugs to pipe ends.
- Do not disassemble, reassemble or modify hydraulic equipment without permission from the manufacturer. Have qualified personnel perform any necessary work.
- Provide matching marks for reassembly. Read manuals and determine if you can perform the work. Use any required special jigs or tools.
- Inspect disassembled parts for issues like seizure, interference or wear. Measure and record wear and clearances. Repair or replace problematic parts.
- Clean parts thoroughly before reassembly. Always replace removed O-rings
Hyster k005 (h3.50 xm europe) forklift service repair manualfisejfjsekfksem
This document provides repair instructions for various components of a forklift, including the counterweight, hood, overhead guard, LED lights, operator restraint system, and radiator. The counterweight can be removed using lifting eyebolts and a lifting device. Hood and overhead guard removal involves disconnecting mounting hardware. LED light assemblies must be replaced as units rather than repaired. The operator restraint system, including the seat belt and hood latch, must be correctly adjusted and secured. Radiator removal requires draining coolant and disconnecting hoses and mounts.
This document provides repair instructions for various components of a forklift, including the counterweight, hood, overhead guard, LED lights, operator restraint system, and radiator. The counterweight repair section describes how to safely remove and install the counterweight using lifting eyebolts and a lifting device. The radiator repair section explains how to drain the coolant, disconnect hoses, and remove/install the radiator while adding coolant back to the system. Safety warnings are provided throughout regarding stability of the forklift when components that shift the center of gravity are removed.
Hyster f007 h9.00 xm forklift service repair manualfisejfjsekfksem
The document provides instructions for repairing the service frame, counterweight, fenders, hood, hydraulic tank, and other parts of a lift truck. It describes removing and installing the counterweight, fenders, and hydraulic tank. It also details cleaning and repairing the hydraulic tank, including procedures for small leaks, large leaks, and cleaning the tank using steam or chemical solutions. Welding repairs require disconnecting electronics to avoid damage.
Hyster f019 (h360 hd ec) forklift service repair manualfisejfjsekfksem
This document provides repair procedures for a differential assembly. It describes the components of a typical differential, including the housing, ring and pinion gear set, and differential assembly. It provides steps to remove the differential carrier from the axle housing, remove the differential and ring gear from the carrier, and remove the drive pinion and pinion carrier from the carrier. It also describes how to disassemble the differential and ring gear assembly and disassemble the drive pinion and pinion carrier. The document includes warnings and cautions for safe repair.
Hyster f007 h8.00 xm forklift service repair manualfisejfjsekfksem
This document provides instructions for repairing various components of lift trucks, including the counterweight, fenders, hood, hydraulic tank, and other parts. The counterweight and fenders are very heavy and require lifting equipment to remove and install safely. Welding should be done carefully to avoid damaging electronic control modules. Detailed steps are provided for removing, inspecting, and reinstalling each part. Safety warnings are included throughout regarding the heavy weights involved.
Hyster d010 (s35 xm) forklift service repair manualfisejfjsekfksem
The document provides an overview of the components and operation of a single-speed powershift transmission, including:
1) The transmission contains forward and reverse clutch assemblies, a torque converter, transmission pump, control valve, and differential assembly to transfer power from the engine to the wheels.
2) The torque converter uses fluid coupling between an impeller and turbine to transfer power from the engine to the transmission, and can multiply engine torque through a stator clutch mechanism.
3) The forward and reverse clutch assemblies use hydraulic pressure to engage friction discs and transfer power between the input shaft and either the forward or reverse gears to select transmission direction.
Hyster d005 (h80 e europe) forklift service repair manualfisejfjsekfksem
This document provides instructions for servicing GM engines. It describes removing and installing the cylinder head and valve mechanism. Key steps include:
- Disconnecting battery cables and draining coolant before disassembly
- Using a compressor tool to remove the valve springs and related components
- Cleaning carbon from the combustion chambers and valve ports
- Inspecting the cylinder head, valves, valve guides and related components
- Checking clearances and replacing worn parts as needed
- Lapping the valves and valve seats if minor wear is present
Hyster b187 (s3.00 xl europe) forklift service repair manualfisejfjsekfksem
The document provides descriptions and service procedures for the brake system on certain Hyster lift truck models. It describes the components of the service brake assembly, including the master cylinder, wheel cylinders, brake shoes, and parking brake system. Two sizes of service brakes, 260mm and 310mm, are used on the H3.00XL lift trucks. The document outlines procedures for removal and disassembly of the 260mm service brakes, cleaning brake parts, inspecting brake components, and reassembling and installing the 260mm service brakes. Safety warnings are provided throughout regarding handling brake components and preventing asbestos dust.
Hyster a917 (h900 hd) forklift service repair manualfisejfjsekfksem
This document provides repair procedures for differentials used in lift trucks. It describes the components of a typical differential assembly, including the housing, ring and pinion gears, and differential assembly. The procedures describe how to remove the differential carrier from the axle housing, disassemble the differential assembly into its main components, and remove the drive pinion and pinion carrier. Safety warnings and cautions are provided throughout regarding supporting the vehicle, using proper tools, and avoiding damage to parts.
This document provides service information for W8, W9, and W10 series E loaders. It includes sections on general engine specifications, maintenance and lubrication schedules, engine systems like fuel, cooling, and electrical. It also covers servicing procedures for components like the transmission, hydraulics, steering, brakes and mounted equipment. The document contains detailed part numbers, specifications and maintenance intervals to service these loaders.
Case 1021 g tier 4b (final) wheel loader service repair manualfisejfjsekfksem
This service manual provides information for servicing and maintaining Case model 1021G and 1121G wheel loaders that meet Tier 4B emissions standards. The manual includes sections covering the engine, transmission, axles, brakes, hydraulic systems, frames, steering, wheels, cab climate control, and electrical systems. Safety precautions are provided throughout to prevent injury when working on or operating the equipment.
Case 921 g tier 2 wheel loader service repair manualfisejfjsekfksem
This document is a service manual for CNH Industrial wheel loaders models 821G and 921G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for technicians, and stresses the importance of following all safety precautions when working on the equipment.
Case 821 g wheel loader xr eh, new cab tier4b wheel loader service repair manualfisejfjsekfksem
This document is a service manual that provides specifications and repair information for 821G and 921G wheel loaders. It includes sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, and electrical systems. The introduction provides safety information for working on the machines. The manual also includes specifications for the engines, such as displacement, configuration, fuel injection details, performance data, and horsepower ratings.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
2. 15 - Engine
12 - Crankshaft
00 - General
15 - 58 9813/7700-3 15 - 58
Operation
Refer to Camshaft-Operation PIL 15-15-00 .
Lubrication
Oil is fed from the main gallery via five drillings, one
to each of the main bearings. A groove around the
diameter of the upper main bearing shell allows oil
transfer to cross drillings in the crankshaft to feed
each of the big end bearings. Crankshaft gear is
'splash' lubricated. Front and rear crankshaft oil seals
prevent oil leakage from, and dirt ingress to, the
engine.
Figure 64.
1 Main gallery 2 Drillings (x5)
3 Main bearings 4 Big end bearings
5 Cross drillings 6 Crankshaft gear
7 Crankshaft oil seal 8 Crankshaft oil seal
3. 15 - Engine
12 - Crankshaft
00 - General
15 - 59 9813/7700-3 15 - 59
Check (Condition)
1. Check the main bearing surfaces for damage and
excessive wear.
Figure 65.
A
A Main bearing shells
2. Measure the crankshaft diameters to confirm
they are within service limits, refer to Technical
Data (PIL 15-12).
Figure 66.
B
B Crankshaft
3. Check that the oil-way cross drillings in the
crankshaft are clear and free from debris.
Blocked or restricted oil-ways will cause oil
starvation at the big end bearings.
4. Check that the piston cooling J-jets are clear. If
the J-jets cannot be cleared remove the fixing
screws. Remove theJ-jets and discard them.
5. Install new J-jets.
Figure 67.
D
C
C J-jets
D Fixing screws
4. 15 - Engine
12 - Crankshaft
00 - General
15 - 60 9813/7700-3 15 - 60
Remove and Install
Consumables
Description Part No. Size
Cleaner/Degreaser
- General purpose
solvent based parts
cleaner
4104/1557 0.4L
CAUTION This component is heavy. It must only
be removed or handled using a suitable lifting
method and device.
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Remove the engine, refer to (PIL 15-00).
4. Remove the drive belt, refer to (PIL 15-18).
5. Remove the crankshaft pulley, refer to (PIL
15-12).
6. Remove the oil sump, refer to (PIL 15-45).
7. Disconnect and remove the fuel pipes from the
injectors, refer to (PIL 18-96).
8. Remove the rocker cover, refer to (PIL 15-42).
9. Remove the fuel injectors, refer to (PIL 18-18).
10. Remove the rocker assembly including the push
rods, refer to (PIL 15-42).
11. It is not necessary to remove the cylinder head
assembly to remove the crankshaft. If however
the cylinder head needs to be removed for other
reasons (for piston and connecting rod removal
for example) remove it now, refer to (PIL 15-06).
12. Remove the fuel injection pump, refer to (PIL
18-18).
13. Remove the starter motor, refer to (PIL 15-75).
14. Remove the high duty PTO device (if installed).
15. Position the engine upside down in a suitable jig
or fixture, supported at the front of the cylinder
block.
16. Remove the flywheel, refer to (PIL 15-54).
17. Remove the flywheel housing, refer to (PIL
15-54).
18. Remove the fuel injection pump drive gear, refer
to (PIL 15-51).
19. Remove the oil pump, refer to (PIL 15-60).
20. Remove the high duty PTO idler drive gear (if
installed), refer to (PIL 15-51).
21. Remove the crankshaft drive gear, refer to (PIL
15-51).
22. Remove the camshaft, refer to (PIL 15-15).
23. Remove the rear timing case, refer to (PIL
15-51).
24. If the pistons and connecting rods have not been
removed, undo and remove the main bearing
caps, refer to (PIL 15-12).
25. Remove the bedplate, refer to (PIL 15-09).
Remove
1. Remove the thrust washers between the
crankshaft and crankcase rear main bearing.
5. 15 - Engine
12 - Crankshaft
00 - General
15 - 61 9813/7700-3 15 - 61
Figure 68.
C
B
A
A
A Thrust Washers B Crankshaft
C Rear main bearing
2. Put labels on the thrust washers to make sure
that they are installed in the correct positions
during assembly.
3. Use suitable lifting equipment to carefully lift the
crankshaft from the crankcase (if the crankshaft
is lifted manually, two people will be required).
4. Carefully lift out the bearing shells.
Figure 69.
D
D Main bearing shells
5. It is recommended that the bearing shells are
replaced. If however they are to be used again,
put label on the shells to make sure that they
are installed in their original positions during
assembly.
6. Inspect the crankshaft and main bearings etc.
for damage and excessive wear. Refer to Check
Condition (PIL 15-12).
Before Installation
1. Clean off all traces of the old sealant compound
from the crankcase and bedplate mating faces.
2. Use a suitable degreasing agent to carefully
clean the main bearing saddles in the bedplate
and crankcase. Take care not to block the oil
ways or the piston cooling jets.
Consumable: Cleaner/Degreaser - General
purpose solvent based parts cleaner
Important: Cleanliness is of the utmost importance.
Blocked oil-ways or oil jets will cause engine failure.
Before you install the crankshaft make sure that ALL
oil-ways and jets are clear and free from debris.
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Make sure that all items are clean and free from
damage and corrosion.
3. If removed or a new crankcase is being installed
then install cooling J jets as follows:
6. 15 - Engine
12 - Crankshaft
00 - General
15 - 62 9813/7700-3 15 - 62
Figure 70.
F
E
E J jets (x4)
F Fixing screws
3.1. Insert the cooling jets into the crankcase.
3.2. Note: There are different types of cooling
jets installed depending on the engine
application. The jets are colour coded.
3.3. Be sure to install the correct jets. Refer to
the relevant parts catalogue for the correct
cooling jet identification.
3.4. Tighten the retaining screws to the correct
torque value.
4. Install the upper bearing shells as follows:
Figure 71.
D
G
D Main bearing shells
G Bearing location tab
4.1. Use a suitable degreasing agent to make
sure that the surface of the upper bearing
shells are clean.
Consumable: Cleaner/Degreaser - General
purpose solvent based parts cleaner
4.2. Assemble the bearing shells into the
crankcase bearing saddles. Make sure that
the location tab engages into the slot as
shown.
4.3. Important: Make sure that the oil-way holes
in the bearing saddles align with the holes
in the bearing shell. If the holes are even
partially misaligned the piston cooling oil jet
will be restricted, causing the engine to fail.
4.4. Lubricate the upper bearing shells with
clean engine oil.
5. Use suitable lifting equipment (if the crankshaft
is lifted manually, two people will be required), to
carefully lower the crankshaft into the crankcase.
DO NOT rotate the crankshaft, the bearing shells
can become dislodged, refer to step 4.
6. Install the thrust washers as follows:
7. 15 - Engine
12 - Crankshaft
00 - General
15 - 63 9813/7700-3 15 - 63
Figure 72.
C
B
A
A
A
H
A Thrust washers B Crankshaft
C Rear main bearing H Oil slot - thrust washers
6.1. Slide the thrust washers between the
crankshaft and the crankcase rear main
bearing.
6.2. Make sure that they are installed in the
correct positions, with the two slots facing
outwards from the bearing saddle.
6.3. If necessary, push the crankshaft forward
and then backwards to obtain clearance to
install the thrust washers.
6.4. DO NOT rotate the crankshaft, the bearing
shells can become dislodged, refer to step
4.
7. Check that the crankshaft end float is within
service limits, refer to Technical Data (PIL 15-12).
Table 54. Torque Values
Item Nm
F 24
8. 15 - Engine
12 - Crankshaft
03 - Main Bearing
15 - 64 9813/7700-3 15 - 64
03 - Main Bearing
Introduction .................................................... 15-64
Check (Condition) .......................................... 15-65
Remove and Install ....................................... 15-65
Introduction
In a piston engine, the main bearings are the
bearings on which the crankshaft rotates.
The bearings hold the crankshaft in place and
prevent the forces created by the piston and
transmitted to the crankshaft by the connecting rods
from dislodging the crankshaft, instead forcing the
crank to convert the reciprocating movement into
rotation.
Figure 73.
A
B
A Main bearing
B Crankshaft
9. 15 - Engine
12 - Crankshaft
03 - Main Bearing
15 - 65 9813/7700-3 15 - 65
Check (Condition)
1. Check the bearing shell surfaces for signs of
damage and excessive wear.
2. Measure the crank pin diameters to confirm they
are within service limits, refer to Technical Data
(PIL 15-12).
3. Renew any parts that are worn or not within the
specified tolerances.
Remove and Install
Refer to Crankshaft- Remove and Install. Refer to
(PIL 15-12).
10. 15 - Engine
12 - Crankshaft
06 - Front Oil Seal
15 - 66 9813/7700-3 15 - 66
06 - Front Oil Seal
Remove and Install
Special Tools
Description Part No. Qty.
Crankshaft Front Oil
Seal Installation Tool
892/01157 1
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Get access to the engine.
4. Remove the drive belt, refer to (PIL 15-18).
5. Remove the crankshaft pulley, refer to (PIL
15-12-12).
Remove
1. Use a suitable lever behind the lip of the
seal, carefully prise out the oil seal from the
counterbore in the crankcase. Take care not
to scratch or damage the counterbore or the
crankshaft hub. Damaged or dirty sealing faces
will cause the oil seal to fail.
Figure 74.
C
A
B
A Crankshaft oil seal
B Crankcase
C Crankshaft hub
Install
1. Make sure that the counterbore and the
crankshaft hub are clean and free from damage
and corrosion. Use a suitable degreasing agent
to clean all traces of oil and grease from the
counterbore. Important: The oil seal has a special
coating and MUST be installed dry without
lubricant.
2. Dismantle the seal installation tool. Bolt the
centre body to the crankshaft hub, using the
bolts. Refer to Figure 75.
Special Tool: Crankshaft Front Oil Seal
Installation Tool (Qty.: 1)
3. Install the oil seal on to the centre body. Make
sure that the seal is installed the correct way
around. Assemble the outer sleeve on to the
centre body and install the screw. Refer to Figure
75.
11. 15 - Engine
12 - Crankshaft
06 - Front Oil Seal
15 - 67 9813/7700-3 15 - 67
Figure 75.
F D
G
H
B
G
F
C
A
E
A Crankshaft oil seal B Crankcase
C Crankshaft hub D Seal installation tool
E Fixing bolts (x3) F Centre body
G Outer sleeve H Screw
4. Turn the screw to push the seal squarely into
the counterbore until the outer sleeve comes
up against the front edge of the counterbore.
When correctly installed, the front face of the seal
should be flush with the edge of the counterbore
within the specified tolerance. Refer to Figure 76.
Dimension: -0.5 -0/+0.5mm
Figure 76.
B
G
F
C
A
A Crankshaft oil seal
B Crankcase
C Crankshaft hub
F Centre body
G Outer sleeve
5. Remove the seal installation tool.
12. 15 - Engine
12 - Crankshaft
06 - Front Oil Seal
15 - 68 9813/7700-3 15 - 68
After Installation
1. Install the crankshaft pulley, refer to (PIL
15-12-12).
2. Install the drive belt, refer to (PIL 15-18).
13. 15 - Engine
12 - Crankshaft
09 - Rear Oil Seal
15 - 69 9813/7700-3 15 - 69
09 - Rear Oil Seal
Remove and Install
Special Tools
Description Part No. Qty.
Crankshaft Rear Oil
Seal Installation Tool
892/01156 1
Crankshaft Rear Oil
Seal Alignment Tool
892/01158 1
Note: The flywheel hub and crankshaft rear oil seal
need to be replaced as a pair.
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Get access to the engine.
4. Remove the flywheel, refer to (PIL 15-54).
Remove
1. Use a suitable lever behind the lip of the seal
to carefully prise out the rear oil seal from the
counterbore in the flywheel housing. Take care
not to scratch or damage the counterbore or the
flywheel hub. Damaged or dirty sealing faces will
cause the oil seal to fail.
Figure 77. 24mm Hub
A
C B
A Crankshaft rear oil seal
B Flywheel housing
C Flywheel hub
Figure 78. 15mm Hub
A
C E
B
A Crankshaft rear oil seal
B Flywheel housing
C Flywheel hub
E Fixing bolt
Install (24mm Hub)
1. Make sure that the counterbore and the flywheel
hub are clean and free from damage and
corrosion.
14. 15 - Engine
12 - Crankshaft
09 - Rear Oil Seal
15 - 70 9813/7700-3 15 - 70
Figure 79.
B
A
D
D
C
A Crankshaft rear oil seal B Flywheel housing
C Flywheel hub D Oil seal alignment tool
2. To prevent the seal lip rolling over and becoming
damaged, make sure that you use the oil seal
alignment tool to initially install the oil seal on to
the flywheel hub. Locate the alignment tool over
the end of the hub, then carefully push the oil seal
over the alignment tool and on to the crankshaft
diameter. Make sure that the oil seal is installed
the correct way around.
Special Tool: Crankshaft Rear Oil Seal
Installation Tool (Qty.: 1)
Special Tool: Crankshaft Rear Oil Seal Alignment
Tool (Qty.: 1)
3. Apply lubricant P80 around the seal outer rubber
diameter.
4. Dismantle the oil seal installation tool. Bolt the
centre body to the flywheel hub, using the two
flywheel bolts. Assemble the outer sleeve on to
the centre body and install the screw.
Figure 80.
A
B
C
F
E
F
H
G
J
H
G
A Crankshaft rear oil seal B Flywheel housing
C Outer sleeve E Oil seal installation tool
F Flywheel bolts G Centre body
H Flywheel hub J Screw
5. Turn the screw to push the seal squarely into
the counterbore until the outer sleeve comes
up against the front edge of the counterbore.
When correctly installed, the front face of the seal
should be flush with the edge of the counterbore
within the tolerance specified.
Length/Dimension/Distance: 0.5mm
6. Remove the oil seal installation tool.
Install (15mm Hub)
1. Make sure that the counterbore and the hub are
clean and free from damage.
15. 15 - Engine
12 - Crankshaft
09 - Rear Oil Seal
15 - 71 9813/7700-3 15 - 71
Figure 81.
B
A
D
D
C
A Crankshaft rear oil seal B Flywheel housing
C Flywheel hub D Oil seal alignment tool
2. Install the new hub on to the crankshaft gear and
install the old hub on the outside of the new hub
to create a double thickness flywheel hub, install
the fixing bolt as shown at A. Do not touch the
PTFE seal lips of the crankshaft oil seal.
3. Make sure that you use the oil seal alignment tool
to initially install the oil seal on to the flywheel
hub to prevent damage to the seal lip. Locate the
alignment tool over the end of the hub, carefully
push the oil seal over the alignment tool as far
on to the crankshaft hub as possible. Make sure
that the seal is installed the correct way around.
Special Tool: Crankshaft Rear Oil Seal
Installation Tool (Qty.: 1)
Special Tool: Crankshaft Rear Oil Seal Alignment
Tool (Qty.: 1)
4. Apply the lubricant P80 around the seal outer
rubber diameter.
5. Dismantle the oil seal installation tool. Use the
two flywheel bolts to attach the centre body on to
the flywheel hub. Assemble the outer sleeve on
to the centre body include the extension ring and
install the screw.
Figure 82.
A
B
C1 C2
F
G
H
J
K
L
K
J
A Crankshaft rear oil seal B Flywheel housing
C1 New hub C2 Old hub
F Flywheel bolts G Oil seal installation tool
H Extension ring J Centre body
K Outer sleeve L Screw
6. Turn the screw to push the seal into position in
the counterbore so that the screw will not turn.
16. 15 - Engine
12 - Crankshaft
09 - Rear Oil Seal
15 - 72 9813/7700-3 15 - 72
7. Remove the oil seal installation tool, remove the
old hub and install the fixing bolt. Repeat steps 5
and 6 to fully install the rear oil seal.
8. Remove the oil seal installation tool.
After Installation
1. Install the flywheel, refer to (PIL 15-54).
Table 55. Torque Values
Item Nm
E 47
17. 15 - Engine
12 - Crankshaft
12 - Pulley
15 - 73 9813/7700-3 15 - 73
12 - Pulley
Remove and Install
Special Tools
Description Part No. Qty.
Torque Wrench
(10-100Nm)
993/70111 1
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Get access to the engine.
4. Remove the drive belt. Refer to (PIL 15-18).
Remove
1. Remove the fixing bolts and withdraw the pulley
from the crankshaft.
Figure 83.
A
B
A
A Crankshaft pulley
B Fixing bolts (x3)
2. The bolts must not be reused. Discard the bolts.
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Make sure that all items are clean and free from
damage and corrosion.
3. Renew the fixing bolts. Tighten the new bolts in
three stages to the correct torque value.
Special Tool: Torque Wrench (10-100Nm) (Qty.:
1)
4. The bolts are tightened using a torque and
angle method. Refer to Fasteners and Fixings,
General, Introduction (PIL 72-00).
Figure 84.
C
C Angle gauge (obtain locally)
After Replacement
1. Install the drive belt. Refer to (PIL 15-18).
Table 56.
Item Torque Value
(Nm)
Torque Angle
(Degrees)
2 (1st stage) 30N·m
2 (2nd stage) 75N·m
2 (Final stage) 180°
18. 15 - Engine
15 - Camshaft
00 - General
15 - 78 9813/7700-3 15 - 78
Operation
As the crankshaft rotates the camshaft also rotates,
driven by a gear on the crankshaft. The inlet and
exhaust valves are opened by lobes on the camshaft
in time with the cycle.
The diagrams show the position of the camshaft at
each part of the four stroke cycle, refer to Engine-
General, Operation. Refer to: PIL 15-00-00.
It can be seen that for a complete cycle the camshaft
revolves once. Since the crankshaft revolves twice
during the cycle it follows that the camshaft is driven
at half crankshaft (engine) speed.
Lubrication
Oil is fed from the main gallery via a drilling to the
camshaft bearing. A groove around the diameter of
the bearing and connecting the cross drilling ensures
that oil is always fed to the centre drilling. Oil is then
transferred to the remaining camshaft bearings by
further cross drillings in the shaft. The cam lobes and
tappets are 'splash' lubricated.
Figure 86.
1 Main gallery 2 Camshaft bearing
3 Groove 4 Centre drilling
19. 15 - Engine
15 - Camshaft
00 - General
15 - 79 9813/7700-3 15 - 79
Check (Condition)
1. Inspect the camshaft gear teeth for signs of
damage or excessive wear.
2. Inspect the cam lobes for signs of excessive
wear, scoring or pitting.
3. Inspect the cam bearing surfaces for signs
of excessive wear, or scoring. Check that the
dimensions are within service limits.
4. Inspect the cam bearing surfaces inside the
crankcase for signs of excessive wear, or
scoring. Check that the dimensions are within
service limits.
5. Inspect the bearing surfaces of the tappets for
signs of excessive wear or damage. Check that
the dimensions are within service limits.
6. Inspect the tappet bores inside the crankcase for
signs of excessive wear or damage. Check that
the dimensions are within service limits.
7. If any of the camshaft bearings or lobes are worn
or damaged then the relative oil feed galleries
in the crankcase and camshaft may be blocked.
Make sure all oil ways are clear and free from
debris.
Remove and Install
Before Removal
1. Drain the oil from the engine.
2. Disconnect and remove the fuel pipes from the
injectors. Refer to (PIL 18-96).
3. Remove the rocker cover. Refer to (PIL 15-42).
4. Remove the fuel injection pump. Refer to (PIL
18-18).
5. Remove the rocker assembly and push rods.
Refer to (PIL 15-42).
6. Remove the starter motor. Refer to (PIL 15-75).
7. Remove the oil sump. Refer to (PIL 15-45).
8. Remove the flywheel. Refer to (PIL 15-54).
9. Remove the flywheel housing. Refer to (PIL
15-54).
10. Rotate the crankshaft until the camshaft timing
pin can be inserted through the gear and into the
aligning hole in the rear gear case.
Figure 87.
A
A Timing pin- camshaft
11. Remove the taper blanking plug and insert
crankshaft locking pin. The camshaft and
crankshaft locking pins must be in position to lock
the crankshaft and camshaft before removing the
camshaft assembly.
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
21. 15 - Engine
15 - Camshaft
00 - General
15 - 80 9813/7700-3 15 - 80
Figure 88.
B
C
B Timing pin- crankshaft
C Blanking plug
12. Remove the fuel injection pump drive gear. Refer
to (PIL 15-51).
Remove
The engine must be inverted. Do not attempt to
remove the camshaft and its drive gears with the
engine upright. The tappets and push rods will
fall into the engine and further dismantling will be
required to retrieve them.
1. Remove the camshaft timing pin.
2. Carefully withdraw the camshaft and gear
assembly from the crankcase. Make sure that
you fully support the camshaft to prevent the
lobes contacting the bearing surfaces in the
crankcase. The bearing surfaces can easily be
damaged by the sharp hard edges on the cam
lobes.
Figure 89.
A
D
A Timing pin - camshaft
D Camshaft and drive gear
3. Access the tappets through the apertures in
the crankcase bedplate next to the crankshaft.
Lift out the tappets from the crankcase using a
suitable magnetic probe. Label the tappets to
ensure replacement in their original positions.
Figure 90.
E
F
E
E Tappet
F Magnetic probe
Inspection
1. Refer to Camshaft- Check Condition (PIL 15-15).
Install
1. Lubricate the tappets and tappet bores inside the
crankcase with clean engine oil.
2. Insert the tappets in their original positions in the
crankcase using a suitable magnetic probe.
3. Lubricate the camshaft bearing journals inside
the crankcase with clean engine oil.
4. Carefully insert the camshaft assembly into the
crankcase as shown. Support the camshaft
preventing the lobes contacting the bearing
surfaces in the crankcase. Before meshing the
camshaft gear with the crankshaft gear, rotate
the camshaft until the timing hole in the gear
aligns with the dowel hole in the gear casing.
Insert the timing pin T1 to lock the camshaft in
this position.
22. 15 - Engine
15 - Camshaft
00 - General
15 - 81 9813/7700-3 15 - 81
After Installation
1. Note that the fuel injection pump drive gear
fixing nut is torque tightened as part of the fuel
injection pump replacement procedure. Refer to
(PIL 18-18).
2. Do the procedures in Before Removal in reverse
order.