The document is a service manual that provides instructions for servicing various components of a JCB engine. It includes sections on removing and installing the oil sump, timing gears, fuel injection pump gear, and heavy duty PTO gear. Detailed steps are provided, along with torque specifications and warnings about locking the crankshaft and camshaft before removing certain components.
Caterpillar cat m316 d wheeled excavator (prefix w6a) service repair manual (...fujsjefjwerkskemm
This document provides instructions for removing and installing an idler gear on a Caterpillar C6.6 engine. It describes the required tools and steps to:
1) Lock the camshaft and crankshaft in position, remove bolts, and remove the standard or heavy-duty idler gear.
2) Clean and inspect the idler gear components, install the idler gear while aligning timing marks, install bolts, and check end play and backlash.
3) Ensure the number one piston is at top dead center before installing the idler gear in the correct position and alignment.
Caterpillar cat m318 d wheeled excavator (prefix w8p) service repair manual (...fdjjsekksemxs
This document provides instructions for removing and installing an idler gear on a Caterpillar C6.6 diesel engine. It describes:
1) The required tools and preparation steps, which include locking the camshaft and crankshaft, removing covers, and ensuring the valves are closed.
2) The removal procedure, which involves marking components, loosening rocker arms, and tilting the idler gear during removal.
3) The installation procedure, such as cleaning parts, aligning timing marks, and lubricating before sliding the hub into the idler gear. Precise timing of the camshaft and crankshaft is required.
Jcb 560 80 tier 4 telescopic handler service repair manual sn from 2460601 on...fusefjjskekemm
The document provides instructions for servicing fuel injectors and related components on JCB Loadall vehicles. It begins with an introduction to fuel injectors and their purpose. The main sections include checking injector operation using leak-off tests, removing and installing individual injectors, removing and installing injector seals, and removing and installing the common fuel rail assembly. Torque specifications are provided for reinstalling components.
Jcb 325 t skid steer loader service repair manual sn from 2476302 to 2477300fujsjefjskekmem
This service manual provides instructions for servicing JCB skid steer loaders and their components. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics and electrical system. The section summarized here provides instructions for removing and installing the crankshaft from the engine. It describes cleaning and inspecting the crankshaft, lists the required tools and consumables, and outlines the step-by-step removal and installation procedures. Precautions are given such as allowing the engine to cool before working on it and using lifting devices due to the heavy weight of components.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fdjjsekksemxs
This service manual provides instructions for servicing track-type tractors. It details the process for removing and installing track roller frames, which requires separating the track, supporting the tractor, and removing bolts and pins to detach the frame. It also describes removing and installing idlers, which involves separating the caps and blocks to take the idlers off and replacing seals before reattaching everything.
Jcb hydradig 110 w wheeled excavator service repair manual (serial no. from 2...fiskefjskemem
This document provides instructions for removing and installing the oil sump on a JCB Hydradig 110W wheeled excavator. It begins with an introduction to the engine's lubrication system and the role of the oil sump. The component identification section outlines the main parts of the oil sump. The removal and installation section provides a step-by-step process for accessing the engine and safely removing the oil sump, replacing gaskets, and reinstalling the sump. Proper torque values for fasteners are also included.
Jcb tm420 telescopic wheel loader service repair manual sn 2454001 and upfusjjfksekmme
This service manual section provides instructions for removing and installing the master clutch, as well as disassembling and assembling it. The master clutch controls gear changes in the transmission. Removal involves using jacking bolts and threaded lifting eyes to detach the clutch cover and drum. Assembly is the reverse of disassembly, replacing worn parts as needed and applying the specified torques. Special tools like retainers and a mandrel are required for some steps.
Jcb js130 excavator service repair manual sn from 2373080 to 2375080fiskefjskemem
The document provides a service manual for excavator tracks. It includes sections on track components, measuring wear using technical data tables, adjusting tracks, removing and installing tracks, and storing tracks. Procedures are provided for measuring link rail surface wear, track pitch/internal pin and bush wear, and bush external wear to determine wear percentages and maintenance requirements.
Caterpillar cat m316 d wheeled excavator (prefix w6a) service repair manual (...fujsjefjwerkskemm
This document provides instructions for removing and installing an idler gear on a Caterpillar C6.6 engine. It describes the required tools and steps to:
1) Lock the camshaft and crankshaft in position, remove bolts, and remove the standard or heavy-duty idler gear.
2) Clean and inspect the idler gear components, install the idler gear while aligning timing marks, install bolts, and check end play and backlash.
3) Ensure the number one piston is at top dead center before installing the idler gear in the correct position and alignment.
Caterpillar cat m318 d wheeled excavator (prefix w8p) service repair manual (...fdjjsekksemxs
This document provides instructions for removing and installing an idler gear on a Caterpillar C6.6 diesel engine. It describes:
1) The required tools and preparation steps, which include locking the camshaft and crankshaft, removing covers, and ensuring the valves are closed.
2) The removal procedure, which involves marking components, loosening rocker arms, and tilting the idler gear during removal.
3) The installation procedure, such as cleaning parts, aligning timing marks, and lubricating before sliding the hub into the idler gear. Precise timing of the camshaft and crankshaft is required.
Jcb 560 80 tier 4 telescopic handler service repair manual sn from 2460601 on...fusefjjskekemm
The document provides instructions for servicing fuel injectors and related components on JCB Loadall vehicles. It begins with an introduction to fuel injectors and their purpose. The main sections include checking injector operation using leak-off tests, removing and installing individual injectors, removing and installing injector seals, and removing and installing the common fuel rail assembly. Torque specifications are provided for reinstalling components.
Jcb 325 t skid steer loader service repair manual sn from 2476302 to 2477300fujsjefjskekmem
This service manual provides instructions for servicing JCB skid steer loaders and their components. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics and electrical system. The section summarized here provides instructions for removing and installing the crankshaft from the engine. It describes cleaning and inspecting the crankshaft, lists the required tools and consumables, and outlines the step-by-step removal and installation procedures. Precautions are given such as allowing the engine to cool before working on it and using lifting devices due to the heavy weight of components.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fdjjsekksemxs
This service manual provides instructions for servicing track-type tractors. It details the process for removing and installing track roller frames, which requires separating the track, supporting the tractor, and removing bolts and pins to detach the frame. It also describes removing and installing idlers, which involves separating the caps and blocks to take the idlers off and replacing seals before reattaching everything.
Jcb hydradig 110 w wheeled excavator service repair manual (serial no. from 2...fiskefjskemem
This document provides instructions for removing and installing the oil sump on a JCB Hydradig 110W wheeled excavator. It begins with an introduction to the engine's lubrication system and the role of the oil sump. The component identification section outlines the main parts of the oil sump. The removal and installation section provides a step-by-step process for accessing the engine and safely removing the oil sump, replacing gaskets, and reinstalling the sump. Proper torque values for fasteners are also included.
Jcb tm420 telescopic wheel loader service repair manual sn 2454001 and upfusjjfksekmme
This service manual section provides instructions for removing and installing the master clutch, as well as disassembling and assembling it. The master clutch controls gear changes in the transmission. Removal involves using jacking bolts and threaded lifting eyes to detach the clutch cover and drum. Assembly is the reverse of disassembly, replacing worn parts as needed and applying the specified torques. Special tools like retainers and a mandrel are required for some steps.
Jcb js130 excavator service repair manual sn from 2373080 to 2375080fiskefjskemem
The document provides a service manual for excavator tracks. It includes sections on track components, measuring wear using technical data tables, adjusting tracks, removing and installing tracks, and storing tracks. Procedures are provided for measuring link rail surface wear, track pitch/internal pin and bush wear, and bush external wear to determine wear percentages and maintenance requirements.
Jcb 536 70 telescopic handler service repair manual sn 2460601 and upfujsjefjwerkskemm
This service manual section contains information about JCB diesel engines. It provides a basic description of engine components and operation, including the starter motor, fuel injection system, lubrication system, and ancillary drive components. The manual identifies internal engine parts such as pistons, connecting rods, valves, bearings, and gears. It specifies that all components should be renewed if worn and that leakages should be prevented during maintenance.
Jcb 3 cx backhoe loader service repair manual sn from 2442701 to 2451000fusefjskekkmem
This service manual section provides information on servicing the crankshaft and related components on a backhoe loader. It includes identification of parts, technical specifications, operation descriptions, removal and installation instructions, and check/inspection procedures. Proper cleaning and installation of the crankshaft oil seal is critical to prevent oil leakage. Removal and installation of the crankshaft requires carefully following all steps while ensuring components remain clean and undamaged.
Caterpillar cat 140 h motor grader (prefix cca) service repair manual (cca000...fiskefjskemem
This document provides instructions for assembling a piston pump used in a 140H motor grader. It describes 58 steps to install various components like seals, springs, pins and manifolds. Special tools are required and cleanliness is important to prevent contamination. Finally, it notes the pump must be properly primed and broken in after assembly to avoid early failures.
Jcb js160 tier 4i and t4 f excavator service repair manualfujsjefjwerkskemm
This service manual provides instructions for servicing JCB excavators models JS115 through JS190. It contains sections on the machine body and framework, operator station, engine, driveline, hydraulic system, electrical system and other components. The section on the engine covers topics like removing and installing the rocker cover, camshaft, tappets and oil sump. Precise instructions are provided along with torque specifications and safety warnings.
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...fisjejfskemmd
The document provides instructions for servicing a track-type tractor model D6H, including removing and installing track roller frames, idlers, and disassembling and assembling idlers. The multi-step process involves using various tools to separate parts, align components, install seals, and reassemble. Safety precautions are noted such as ensuring the tractor is level and stable before removing frames to prevent injury.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v103...yhhjjkfkseme
The document provides instructions for disassembling and assembling the differential of a 140G motor grader. It begins by describing how to remove the differential from the carrier by removing nuts, bolts, locks and wires. It then describes removing additional components from the differential including cages, bearings, pinion and seals. The assembly section provides steps for installing these components in reverse order and includes heating bearings to specific temperatures before installation.
Jcb 550 140 telescopic handler service repair manual sn from 2902000 onwardsfisjejfskemmd
This service manual provides instructions for servicing the loadall rough terrain variable reach truck. It contains sections on the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The section summarized focuses on servicing the engine valves and connecting rod big-end bearings. It provides removal and installation instructions, component identification diagrams, and technical specifications for the valves and instructions to check the big-end bearings for wear. Safety information is also provided to ensure the work is performed correctly.
Jcb 536 t70 lp telescopic handler service repair manual sn 2336575 and upfiskefjskemem
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. Specific models covered include 526-56, 531-70, 533-105, 535-95, 536-60, and others. Safety warnings are provided throughout and procedures for removal and installation are described in detail with torque specifications.
Jcb 3 cx backhoe loader service repair manual sn from 2254521 and upfujsjefjskekmem
This service manual provides instructions for servicing the components of JCB 3CX, 4CX, and 5CX backhoe loaders. It contains sections on machine systems and components including the engine, fuel and exhaust systems, cooling system, brakes, steering, hydraulics, electrical system and more. Safety information is provided at the beginning noting the importance of understanding the manual before operating the machine.
Jcb 3 cx compact backhoe loader service repair manual (sn from 2495456 and up)fusefjskekkmem
This service manual provides instructions for servicing a JCB 3CX Compact backhoe loader. It contains sections covering the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The specific section summarized discusses servicing procedures for the engine crankshaft, including how it is lubricated by engine oil, how to check its condition by inspecting the bearing surfaces and diameters, and ensuring the oilways are clear.
Jcb tm220 telescopic wheeled loader service repair manual sn from 2679851 to ...fujsjefjwerkskemm
This service manual provides instructions for servicing the rocker and fittings on the TM180 and TM220 loader engines. The document describes how to remove and install the rocker assembly, disassemble and assemble the rocker arms, and remove and install the rocker cover. Technical specifications are also provided for rocker shaft dimensions, tappet clearances, and tappet dimensions. The operation of the hydraulic tappets is explained, along with difficult operating conditions that could cause play.
Claas axion 850 810 (type a09) tractor service repair manualfusefjskekkmem
1) The document provides instructions for removing and refitting the front axle, epicycloid reducer, and joint unit on a CLAAS AXION 850-810 tractor.
2) Key steps when removing the front axle include draining fluids, removing mounting hardware, wheels, and radiator components.
3) Dismantling the epicycloid reducer involves removing gears, bearings, seals, and mounting components.
4) Removing the joint unit requires taking off the steering bars, supports, and wheel shaft.
Liebherr r954 c 1590 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1390 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1381 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1374 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1341 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of hazards.
Liebherr r944 c 1256 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r944 c 1164 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r944 c 1151 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r944 c 1119 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r944 c 1079 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Jcb 536 70 telescopic handler service repair manual sn 2460601 and upfujsjefjwerkskemm
This service manual section contains information about JCB diesel engines. It provides a basic description of engine components and operation, including the starter motor, fuel injection system, lubrication system, and ancillary drive components. The manual identifies internal engine parts such as pistons, connecting rods, valves, bearings, and gears. It specifies that all components should be renewed if worn and that leakages should be prevented during maintenance.
Jcb 3 cx backhoe loader service repair manual sn from 2442701 to 2451000fusefjskekkmem
This service manual section provides information on servicing the crankshaft and related components on a backhoe loader. It includes identification of parts, technical specifications, operation descriptions, removal and installation instructions, and check/inspection procedures. Proper cleaning and installation of the crankshaft oil seal is critical to prevent oil leakage. Removal and installation of the crankshaft requires carefully following all steps while ensuring components remain clean and undamaged.
Caterpillar cat 140 h motor grader (prefix cca) service repair manual (cca000...fiskefjskemem
This document provides instructions for assembling a piston pump used in a 140H motor grader. It describes 58 steps to install various components like seals, springs, pins and manifolds. Special tools are required and cleanliness is important to prevent contamination. Finally, it notes the pump must be properly primed and broken in after assembly to avoid early failures.
Jcb js160 tier 4i and t4 f excavator service repair manualfujsjefjwerkskemm
This service manual provides instructions for servicing JCB excavators models JS115 through JS190. It contains sections on the machine body and framework, operator station, engine, driveline, hydraulic system, electrical system and other components. The section on the engine covers topics like removing and installing the rocker cover, camshaft, tappets and oil sump. Precise instructions are provided along with torque specifications and safety warnings.
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...fisjejfskemmd
The document provides instructions for servicing a track-type tractor model D6H, including removing and installing track roller frames, idlers, and disassembling and assembling idlers. The multi-step process involves using various tools to separate parts, align components, install seals, and reassemble. Safety precautions are noted such as ensuring the tractor is level and stable before removing frames to prevent injury.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v103...yhhjjkfkseme
The document provides instructions for disassembling and assembling the differential of a 140G motor grader. It begins by describing how to remove the differential from the carrier by removing nuts, bolts, locks and wires. It then describes removing additional components from the differential including cages, bearings, pinion and seals. The assembly section provides steps for installing these components in reverse order and includes heating bearings to specific temperatures before installation.
Jcb 550 140 telescopic handler service repair manual sn from 2902000 onwardsfisjejfskemmd
This service manual provides instructions for servicing the loadall rough terrain variable reach truck. It contains sections on the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The section summarized focuses on servicing the engine valves and connecting rod big-end bearings. It provides removal and installation instructions, component identification diagrams, and technical specifications for the valves and instructions to check the big-end bearings for wear. Safety information is also provided to ensure the work is performed correctly.
Jcb 536 t70 lp telescopic handler service repair manual sn 2336575 and upfiskefjskemem
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. Specific models covered include 526-56, 531-70, 533-105, 535-95, 536-60, and others. Safety warnings are provided throughout and procedures for removal and installation are described in detail with torque specifications.
Jcb 3 cx backhoe loader service repair manual sn from 2254521 and upfujsjefjskekmem
This service manual provides instructions for servicing the components of JCB 3CX, 4CX, and 5CX backhoe loaders. It contains sections on machine systems and components including the engine, fuel and exhaust systems, cooling system, brakes, steering, hydraulics, electrical system and more. Safety information is provided at the beginning noting the importance of understanding the manual before operating the machine.
Jcb 3 cx compact backhoe loader service repair manual (sn from 2495456 and up)fusefjskekkmem
This service manual provides instructions for servicing a JCB 3CX Compact backhoe loader. It contains sections covering the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The specific section summarized discusses servicing procedures for the engine crankshaft, including how it is lubricated by engine oil, how to check its condition by inspecting the bearing surfaces and diameters, and ensuring the oilways are clear.
Jcb tm220 telescopic wheeled loader service repair manual sn from 2679851 to ...fujsjefjwerkskemm
This service manual provides instructions for servicing the rocker and fittings on the TM180 and TM220 loader engines. The document describes how to remove and install the rocker assembly, disassemble and assemble the rocker arms, and remove and install the rocker cover. Technical specifications are also provided for rocker shaft dimensions, tappet clearances, and tappet dimensions. The operation of the hydraulic tappets is explained, along with difficult operating conditions that could cause play.
Claas axion 850 810 (type a09) tractor service repair manualfusefjskekkmem
1) The document provides instructions for removing and refitting the front axle, epicycloid reducer, and joint unit on a CLAAS AXION 850-810 tractor.
2) Key steps when removing the front axle include draining fluids, removing mounting hardware, wheels, and radiator components.
3) Dismantling the epicycloid reducer involves removing gears, bearings, seals, and mounting components.
4) Removing the joint unit requires taking off the steering bars, supports, and wheel shaft.
Liebherr r954 c 1590 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1390 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1381 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1374 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1341 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of hazards.
Liebherr r944 c 1256 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r944 c 1164 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r944 c 1151 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r944 c 1119 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r944 c 1079 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r924 c compact tier iii hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators. It contains 18 sections that provide technical data, diagrams, and instructions for maintenance and repair. The manual is intended to assist customer support but does not replace technical training. Safety instructions and warnings are included to ensure safe maintenance and repair procedures are followed. The manual structure organizes information into main groups and sub-groups for easy reference.
Liebherr r924 c 1068 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr excavators that contains:
1. Technical data, design descriptions, and service/setup instructions for repairs and maintenance.
2. Safety instructions and warnings for working on the equipment are marked with symbols for danger and caution.
3. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training courses. Site-specific operating instructions and spare parts documents are separate.
Liebherr r924 c 1067 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr hydraulic excavators that contains:
1. Technical data, design descriptions, and service/setup instructions for repairs and maintenance.
2. Safety instructions and warnings for working on the equipment are marked with symbols for danger and caution.
3. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training courses. Site-specific operating instructions and spare parts documents are separate.
Liebherr r916 423 advanced hydraulic excavator service repair manual9fsoeodkkd
This document is the service manual for Liebherr hydraulic excavators. It contains technical specifications and instructions for maintenance and repair. The manual is intended to assist support services and includes safety warnings. It describes the machine's major systems and components including the engine, hydraulics, electrical systems, and more. Symbols are used to indicate hazards and required actions. The manual is intended to help ensure safe and proper maintenance of Liebherr excavators.
Liebherr r914 c 1065 hydraulic excavator service repair manual9fsoeodkkd
This document is a service manual for Liebherr excavators that contains:
1. Technical data, design descriptions, and service/setup instructions for repairs and maintenance.
2. Safety instructions and warnings for working on the equipment are marked with symbols for danger and caution.
3. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training courses. Site-specific operating instructions and spare parts documents are separate.
Jcb 536 70 tier 4 telescopic handler service repair manual sn from 2460601 on...9fsoeodkkd
This document provides service and repair instructions for fuel injectors in JCB Loadall vehicles. It begins with an introduction to the injector components and operation. The main sections provide procedures for checking injector operation with diagnostic tools, removing and installing individual injectors, and removing and installing injector seals in the cylinder head. The summary highlights that the document contains procedures for servicing fuel injectors, including checking operation, removing and installing individual injectors, and removing and installing injector seals.
Jcb 300 skid steer loader service repair manual sn from 2478301 to 24787009fsoeodkkd
This service manual provides instructions for servicing skid steer loaders and their engines. It details removing and installing the engine bedplate, which acts as the main strength component and maintains alignment of internal engine parts. The multi-step procedure requires cleaning parts, applying sealant, installing bearing shells and bolts, and torquing bolts to specified values. Special tools like templates and torque wrenches are needed to correctly complete the process.
Jcb 300 skid steer loader service repair manual sn from 2476302 to 24773009fsoeodkkd
This service manual provides instructions for servicing JCB skid steer loaders and their components. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, driveline, hydraulics, and electrical system. The section summarized here provides instructions for removing and installing the crankshaft from the engine. It describes cleaning and inspecting the crankshaft, lists the required tools and consumables, and outlines the step-by-step removal and installation procedures.
Jcb 280 skid steer loader service repair manual sn from 2478301 to 24787009fsoeodkkd
This service manual provides instructions for servicing skid steer loaders and their engines. It details removing and installing the engine bedplate, which acts as the main strength component and maintains alignment of internal engine parts. The multi-step procedure requires cleaning parts, applying sealant, installing bearing shells and bolts, and torquing bolts to specified values. Special tools like templates and torque wrenches are needed to correctly complete the process.
Jcb 280 skid steer loader service repair manual sn from 2476302 to 24773009fsoeodkkd
This service manual provides instructions for servicing skid steer loaders and their engines. It details removing and installing the engine bedplate, which acts as the main strength component and maintains alignment of internal engine parts. The multi-step procedure requires cleaning parts, applying sealant, installing bearing shells and bolts, and torquing bolts to specified values. Special tools like templates and torque wrenches are needed to correctly complete the process.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. 15 - Engine
45 - Oil Sump
00 - General
15 - 181 9813/5300-1 15 - 181
00 - General
Introduction .................................................. 15-181
Component Identification ............................. 15-182
Remove and Install ..................................... 15-183
Introduction
The lubrication system distributes oil around the
engine by a system of galleries and drillings in the
crankcase and cylinder head. The oil lubricates and
seals the moving parts of the engine, reducing friction
and wear. In addition the oil plays an important role in
cooling the engine by carrying heat from the engine
to the cooler. A piston cooling jet sprays oil onto the
underside of the pistons to keep them cool, refer to
(PIL 15-36).
Oil is drawn from the oil sump by the integral oil pump
via the suction strainer. The strainer prevents any
large particles of debris passing through, which may
damage the pump.
The oil passes from the outlet side of the pump
through a relief valve which limits the maximum oil
pressure by venting oil back to the inlet side of the
pump, refer to (PIL 15-36).
From the pump the oil passes through the oil cooler
and filter, refer to (PIL 15-69 and PIL 15-21).
After cooling and filtering, the oil passes into the
main oil gallery. An oil pressure switch senses the
oil pressure. From the main gallery oil is delivered,
via drillings, to the crankshaft main bearings, rocker
assembly, camshaft and timing gears. Note that
drillings are through the crankcase and cylinder
head.
When the high pressure oil has passed through the
bearings it reverts to sump pressure and splash
lubricates the internal components such as rocker
tips, cam lobes and timing gear teeth. Gravity
drains the oil via drains into the cylinder head and
crankcase, back into the oil sump. A drain slot allows
the oil to drain from the timing case back to the oil
sump.
3. 15 - Engine
45 - Oil Sump
00 - General
15 - 182 9813/5300-1 15 - 182
Component Identification
Figure 185.
1 Oil sump
2 Suction strainer
3 Oil pump
4 Oil cooler
5 Filter
6 Camshaft - high pressure oil feed
7 Crankshaft main bearings - high pressure
oil feed
8 Rocker assembly - high pressure oil feed
9 PTO (Power Take-Off) idler gear bearing/
timing case - high pressure oil feed
10 External high pressure oil feed connection
(crankcase) - Turbocharger (if installed)
11 Main high pressure oil feed gallery
(crankcase)
12 Oil pressure switch
Green- Oil at sump pressure
Red- Oil at high pressure
Pink- Oil at lower pressure but higher than
sump pressure
4. 15 - Engine
45 - Oil Sump
00 - General
15 - 183 9813/5300-1 15 - 183
Remove and Install
Special Tools
Description Part No. Qty.
Template for Sealant
Oil Sump (Pressed)
892/01149 1
Oil Sump Location
Dowel
892/01150 2
Template for Sealant
Oil Sump (Cast)
892/12354 1
Consumables
Description Part No. Size
Clear Silicone Sealant 4102/0901 0.31L
Before Removal
1. Make sure that the engine is safe to work on.
If the engine has been running, make sure the
engine has cooled sufficiently before you start.
2. Drain the engine oil.
Removal
1. Remove the fixing bolts and remove the oil sump
from the engine. The oil sump may be difficult to
remove due to adhesion of sealing compound.
If necessary, carefully lever the mating flanges
apart. Do not use excessive force, the oil sump
could be damaged. Be sure to retrieve the oil pick
up seal.
2. Use a gasket removal compound, carefully
remove all traces of sealing compound from the
oil sump and engine mating faces. Do not allow
the sealing compound to enter the engine.
3. Use a suitable degreasing agent to thoroughly
clean the oil sump.
Figure 186.
1 Oil sump
1a Integral suction tube
1b Integral baffle plates
2 Oil sump fixing bolts (x20)
3 Oil pick up seal
5. 15 - Engine
45 - Oil Sump
00 - General
15 - 184 9813/5300-1 15 - 184
Installation
1. Lightly smear the new oil pick up seal with oil and
install into the bedplate as shown.
Figure 187.
3 Oil pick up seal
2. Install the two guide pins at the oil sump screw
holes in the engine.
Special Tool: Oil Sump Location Dowel (Qty.: 2)
3. Use the fixing bolts to locate the template to
the oil sump mating face. Make sure that the
template is the correct way round (note that holes
are on different centres).
Special Tool: Template for Sealant Oil Sump
(Cast) (Qty.: 1)
Special Tool: Template for Sealant Oil Sump
(Pressed) (Qty.: 1)
4. Apply a bead of sealing compound around the
oil sump flange using the inside edge of the
template as a guide as shown. Note the beads
around holes.
Length/Dimension/Distance: 4mm
Consumable: Clear Silicone Sealant
5. Carefully remove the template without smudging
the sealant beads.
6. Apply a bead of sealant so as to join the sealant
beads around holes with the bead around the oil
sump flange.
Length/Dimension/Distance: 4mm
7. After applying the sealing compound, the oil
sump must be installed and the bolts torque
tightened within
Duration: 5min
Figure 188.
X
X
S Hole
T Hole
T2 Guide pins
X 4mm Bead of sealant
8. Position the oil sump with the suction tube outlet
aligned with the oil pump inlet port on the engine.
Take care not to damage the oil pick up seal when
you install the oil sump. Damage to the seal could
cause a drop in oil pressure and subsequently
damage to the engine.
9. Locate the oil sump on the guide pins on the
engine. Avoid smudging the sealant beads. DO
NOT remove the guide pins until sufficient bolts
have been installed to secure the oil sump.
10. Install the bolts and tighten the bolts to the correct
torque value. Note that the bolts are not installed
at 6 positions.
Figure 189.
2 Bolts
Y No bolts to be fitted at this position (x6)
6. 15 - Engine
45 - Oil Sump
00 - General
15 - 185 9813/5300-1 15 - 185
After Replacing
1. Allow the sealant to cure for
Duration: 20min
2. Refill the engine with the recommended engine
oil. Refer to (PIL 75-00).
3. Start the engine and check for oil leaks.
Table 55. Torque Values
Item Nm
2 24
7. 15 - Engine
51 - Timing Gear
00 - General
15 - 188 9813/5300-1 15 - 188
Component Identification
Figure 190.
B
A
E
D
C
A Crankshaft gear
B Camshaft gear
C High pressure fuel pump gear
D Oil pump gear
E Heavy duty PTO device gear (if fitted)
F Heavy duty PTO device gear (if fitted)
G Low duty PTO device gear (if fitted)
8. 15 - Engine
51 - Timing Gear
00 - General
15 - 189 9813/5300-1 15 - 189
Operation
All the gears are driven via the crankshaft gear as
follows:
• Camshaft gear-The camshaft is driven at half
crankshaft speed.
• High pressure fuel pump gear-The high
pressure fuel pump is driven via the camshaft
gear installed to the camshaft.
• Oil pump gear-The lubrication oil pump is driven
directly by the crankshaft gear.
• Power Take-Off (PTO)-driven by the crankshaft
gear via idler gear.
• Low Duty Power Take-Off (PTO) Gear (if
installed)-driven by the camshaft gear.
Figure 191.
B
A
E
D
C
A Crankshaft gear
B Camshaft gear
C High pressure fuel pump gear
D Oil pump gear
E Heavy duty PTO device gear (if installed)
F Heavy duty PTO device gear (if installed)
10. 15 - Engine
51 - Timing Gear
03 - Crankshaft Gear
15 - 191 9813/5300-1 15 - 191
03 - Crankshaft Gear
Remove and Install
Special Tools
Description Part No. Qty.
Crankshaft / Camshaft
Timing Pin
892/01148 2
Note: The illustrations show the engine inverted. If
the drive gear components are being removed prior
to crankshaft or camshaft removal the engine must
be inverted. If the gear components only are being
removed (for inspection/renewal) then the engine
need not be inverted.
Before Removal
1. Remove the starter motor. Refer to (PIL 15-75).
2. Remove the flywheel. Refer to (PIL 15-54).
3. Remove the flywheel housing. Refer to (PIL
15-54).
4. Rotate the crankshaft until the camshaft locking
pin can be inserted through the gear and into the
aligning hole in the rear gear case. Note: The
camshaft and crankshaft locking pins must be
in position to lock the crankshaft and camshaft
before removing the crankshaft gear.
Special Tool: Crankshaft / Camshaft Timing Pin
(Qty.: 2)
5. Remove the taper blanking plug and insert the
crankshaft locking pin.
12. 15 - Engine
51 - Timing Gear
03 - Crankshaft Gear
15 - 193 9813/5300-1 15 - 193
Remove
1. Remove the flywheel hub fixing bolt and remove
the flywheel hub.
2. Remove the crankshaft gear from the crankshaft.
Make sure you retrieve the location dowel.
Inspect
1. Carefully inspect the outer diameter of the
flywheel hub for signs of wear or damage. Wear
or damage will cause the crankshaft rear oil seal
to fail. If in doubt renew the hub.
Install
1. Apply some clean engine oil to the location spigot
on the end of the crankshaft.
2. Make sure that the dowel is located in the
crankshaft gear and locate the gear and dowel
on to the crankshaft spigot.
3. Install the flywheel hub to the gear, locate on the
dowel. Fix the hub with fixing bolt. Tighten the bolt
to the correct torque value.
Table 56. Torque Values
Item Nm
1 47
6 11
13. 15 - Engine
51 - Timing Gear
06 - Camshaft Gear
15 - 194 9813/5300-1 15 - 194
06 - Camshaft Gear
Remove and Install
The camshaft drive gears are an interference fit on
the end of the camshaft and cannot be removed
individually. If the gears are damaged or worn the
complete camshaft and gear assembly must be
renewed. Refer to Camshaft- Remove and Install.
Refer to (PIL 15-15).
Figure 193.
1
1 Camshaft gear
14. 15 - Engine
51 - Timing Gear
09 - Fuel Injection Pump Gear
15 - 195 9813/5300-1 15 - 195
09 - Fuel Injection Pump Gear
Remove and Install
Note: The illustrations show the engine inverted. If
the drive gear components are being removed prior
to crankshaft or camshaft removal the engine must
be inverted. If the gear components only are being
removed (for inspection/renewal) then the engine
need not be inverted.
Before Removal
1. Remove the high pressure fuel injection pump.
Refer to (PIL 18-18).
2. Loosely install the high pressure fuel pump and
fixing nut, retain the gear.
3. Remove the starter motor. Refer to (PIL 15-75).
4. Remove the flywheel. Refer to (PIL 15-54).
5. Remove the flywheel housing. Refer to (PIL
15-54).
15. 15 - Engine
51 - Timing Gear
09 - Fuel Injection Pump Gear
15 - 196 9813/5300-1 15 - 196
Figure 194.
1
2
1 Drive gear - high pressure fuel pump 2 Fixing nut - drive gear - high pressure fuel
pump
Remove
1. Remove the fixing nut and lift out the gear.
2. If the rear timing case is to be removed, remove
the high pressure fuel pump.
Install
1. Use the fixing nut to loosely install the high
pressure fuel pump and the drive gear. DO NOT
lock the gear to the taper on the fuel pump drive
shaft.
16. 15 - Engine
51 - Timing Gear
09 - Fuel Injection Pump Gear
15 - 197 9813/5300-1 15 - 197
2. Follow the procedures listed under Before
Removal in reverse order. Note that the gear
fixing nut is torque tightened as part of the
high pressure fuel pump replacement procedure.
Refer to (PIL 18-18).
17. 15 - Engine
51 - Timing Gear
15 - Heavy Duty PTO Gear
15 - 198 9813/5300-1 15 - 198
15 - Heavy Duty PTO Gear
Remove and Install
Note: The illustrations show the engine inverted. If
the drive gear components are being removed prior
to crankshaft or camshaft removal the engine must
be inverted. If the gear components only are being
removed (for inspection/renewal) then the engine
need not be inverted.
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Remove the starter motor.
Refer to: Engine > Starter Motor > General >
Remove and Install (Page 15-248).
3. Remove the flywheel.
Refer to: Engine > Flywheel > General > Remove
and Install (Page 15-206).
4. Remove the flywheel housing.
Refer to: Engine > Flywheel > Housing > Remove
and Install (Page 15-208).
18. 15 - Engine
51 - Timing Gear
15 - Heavy Duty PTO Gear
15 - 199 9813/5300-1 15 - 199
Figure 195.
1 Z
Y
6
2
3
W
X
W
4
5
1
2
3
1 High duty PTO idler gear
2 Idler gear hub
3 Idler gear hub retaining screws (x3)
4 Flywheel hub
5 Flywheel hub fixing bolt
6 Idler gear bearing bush
X Crankshaft gear
Y Idler gear hub location dowel
Z Oil feed drilling
Remove
1. Remove the flywheel hub fixing bolt and remove
the flywheel hub. DO NOT remove the crankshaft
gear.
2. Lift the High duty PTO idler gear from the hub.
3. If required, remove the idler gear hub retaining
screws and lift out the hub.
Inspect
1. Check the idler gear teeth and idler gear bearing
bush for signs of damage or excessive wear.
2. Measure the bearing bush inside diameter
to confirm it is within service limits, refer to
Technical Data.
19. 15 - Engine
51 - Timing Gear
15 - Heavy Duty PTO Gear
15 - 200 9813/5300-1 15 - 200
Install
1. Replacement is the reversal of the removal
procedure but note the following.
2. Make sure that all items are clean and free from
damage and corrosion.
3. Make sure the oil way in the idler gear hub is
clear and free from debris. Use an air line to blow
through the oil feed drilling.
4. When you install the idler gear hub, make sure
the Idler gear hub location dowel locates into the
hole in the crankcase.
5. Lubricate the idler gear bearing bush with clean
engine oil.
6. Install the flywheel hub to the crankshaft gear,
locate on the dowel. Tighten the bolt to the
correct torque value.
After Installation
1. Install the flywheel housing.
Refer to: Engine > Flywheel > Housing > Remove
and Install (Page 15-208).
2. Install the flywheel to the crankshaft hub.
Refer to: Engine > Flywheel > General > Remove
and Install (Page 15-206).
3. Install the starter motor.
Refer to: Engine > Starter Motor > General >
Remove and Install (Page 15-248).
Table 57. Torque Values
Item Nm
3 65
5 47
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
21. 15 - Engine
51 - Timing Gear
22 - Rear Case
15 - 201 9813/5300-1 15 - 201
22 - Rear Case
Remove and Install
Special Tools
Description Part No. Qty.
Template for Sealant
Gear case to
Crankcase
892/01176 1
Before Removal
1. Drain the oil from the engine.
2. Disconnect and remove the fuel pipes from the
injectors. Refer to (PIL 18-96).
3. Remove the fuel injection pump. Refer to (PIL
18-18).
4. Remove the fuel lift pump. Refer to (PIL 18-21).
5. Remove the starter motor. Refer to (PIL 15-75).
6. Remove the high duty PTO device (if installed).
7. Remove the low duty PTO device (if installed).
8. Remove the flywheel. Refer to (PIL 15-54).
9. Remove the flywheel housing. Refer to (PIL
15-54).
10. Remove the fuel injection pump drive gear. Refer
to (PIL 15-51).
11. Remove the oil pump. Refer to (PIL 15-60).
12. Remove the high duty PTO idler drive gear (if
installed). Refer to (PIL 15-51).
13. Remove the crankshaft drive gear. Refer to (PIL
15-51).
14. Remove the camshaft. Refer to (PIL 15-15).
22. 15 - Engine
51 - Timing Gear
22 - Rear Case
15 - 202 9813/5300-1 15 - 202
Figure 196.
5
T1
2
1
T1
4
P1
P1
Y X X
X A (T2)
B (T2) C (T2)
X
Z V
X
Y
P1
Y
Y
1
1
3
W
1 Timing gear case - rear
2 Timing case fixing bolts (x19)
3 Crankcase/bedplate assembly
4 Dowel
5 Dowel - with flats
P1 Anaerobic sealant
T1 Alignment pins (Locally manufacture)
T2 Sealant template (comprises: Main template
- A, Long gallery template - B, Short gallery
template - C
23. 15 - Engine
51 - Timing Gear
22 - Rear Case
15 - 203 9813/5300-1 15 - 203
Remove
1. Remove the timing case fixing bolts and then
separate the timing case from the crankcase/
bedplate assembly. DO NOT use a lever to
separate the timing case from the crankcase/
bedplate assembly.
Important: Anaerobic sealant will not start to cure
whilst it is open to the atmosphere, however when
air is excluded (for instance when the two parts are
put together) it will immediately start to harden. Make
sure that all the necessary tools, bolts etc. are readily
available prior to assembling the components. The
parts must be installed and torque tightened within
5 minutes (with a maximum permissible time of 15
minutes).
Install
1. Carefully remove all traces of the old sealing
compound from the timing case and crankcase/
bedplate assembly mating faces. Make sure
that the mating faces are clean and free from
damage. Clean the inside of the timing case
using a suitable degreaser.
2. Install two alignment pins T1 to the crankcase/
bedplate assembly.
3. Make sure that dowels are correctly located in the
crankcase. Note: Dowel 5 has flats which must
be positioned relative to dowel 4, as shown at
W. This ensures correct alignment of the timing
cover.
4. The sealant template T2 comprises three pieces.
Locate parts B and C using the holes in the
templates and fixing bolts at positions Y as
shown.
Special Tool: Template for Sealant Gear case to
Crankcase (Qty.: 1)
5. Use the templates B and C as a guide apply a
continuous 1.5 mm (0.060 in.) bead of sealant
P1 to the case. Remove the bolts from positions
Y. Remove the templates make sure you do not
smudge the sealant. Discard the templates.
6. Locate part A of the template T2 using the holes
in the template and bolts at positions X as shown.
7. Use the template A as a guide apply a continuous
1.5 mm (0.060 in.) bead of sealant P1 to the case.
Do not follow the template at V, instead apply a
continuous bead Z (inboard of the fixing hole).
Remove the bolts from positions X. Remove the
template make sure you do not smudge the
sealant. Discard the template.
8. Locate the timing case on the alignment pins T1
and install the timing case fixing bolts (remove
pins T1 to install the final two bolts). Tighten the
bolts to the correct torque value.
Important: If the parts have not been torque tightened
within the maximum 15 minute time period, then the
parts must be separated, thoroughly cleaned and
fresh sealant applied
After Installation
1. Replace all the components listed under Before
removal in reverse order.
Table 58. Torque Values
Item Nm
2 33