This document provides instructions for removing and replacing front wheel axles on JCB machines. It includes warnings about safely supporting the machine before working underneath. The section describes removing the driveshaft, steering linkages, brake lines, and mounting bolts. Replacement involves reversing these steps and reconnecting lines, bleeding the brakes and steering, and checking torque settings. Specification tables list the component types and torque values.
Mc cormick c l europa tier 2 (2007-2008) - rs50 - 70 tractor service repair m...fdusjejkskem
This document contains a list of engine components for a McCormick tractor. It includes over 140 individual parts with descriptions, part numbers, quantities needed, and other technical specifications. The parts are for the engine, fuel system, valves, pistons, bearings, gears, and other internal components. The document provides replacement and overhaul instructions for the different tractor models and engine types.
Mc cormick bmax tier 3 (2011 ) - rt64 - 100 tractor service repair manualfdusjejkskem
This document contains parts information for engines and components. It lists part numbers, descriptions, and indicates whether parts are for replacement or reference purposes. Serial or engine numbers are referenced for some parts to indicate applicability. Kit designations and tolerance specifications are also provided for some items.
Mc cormick bmax tier 3 (2011 ) - rt64 - 90 tractor service repair manualfdusjejkskem
This document provides parts information for an engine, including:
- Part numbers, serial numbers, replacement kits, and other identifying information for various engine components
- Quantity and other specification information for replacements
- Notes on components that are part of assemblies and not individually serviced
The parts cover multiple engine models and ranges of serial numbers.
Mc cormick bmax tier 3 (2011 ) - rt64 - 80 tractor service repair manualfdusjejkskem
This document contains parts listings and component information for an engine. It includes over 125 individual part listings with information like part numbers, serial numbers, replacement parts, and component types. The parts are for items like the cylinder block, pistons, valves, pumps, sensors and other engine components.
Mc cormick bmax (2007 ) - rt62 - 100 tractor service repair manualfdusjejkskem
This document provides part numbers and component information for engine repairs. It includes listings of parts, part numbers, kits, and specifications needed to repair items like cylinders, pistons, pumps, housings, and other engine components. Quantities of parts and application ranges based on tractor serial numbers are also provided. The document appears to be from an engine repair manual or parts catalog.
Mc cormick 9 7 series (2014- ) - rs37 - 7070 - 7080 arm tractor service repai...fdusjejkskem
This document contains parts listings and diagrams for components of McCormick RS37 model 7070 and 7080 engines. It lists part numbers, names, and other identifying information for items like blocks, heads, crankcases, manifolds, and other internal engine parts. Notes provide information on applications, specifications like lengths and diameters, and whether parts are replacement options. The parts are depicted visually in diagrams to show their place in the engine assembly.
Mc cormick (2011 ) - rs43 - 6450 ism-vrm tractor service repair manualfdusjejkskem
This document provides part numbers and descriptions for components that make up various tractor assemblies. It includes information like part names and numbers, quantities needed, and application details. Replacement part designations and quantities per tractor are also provided for some items. Images are referenced for additional information.
Komatsu wa250 6 wheel loader service repair manual sn75001 and upfdusjejkskem
This document provides information about Komatsu wheel loaders, including:
- The shop manual covers models WA250-6 and WA250PZ-6.
- Specifications for the engines, cooling systems, power trains, steering systems, brake systems, hydraulics systems, and other components are included.
- Standard values, testing and adjustment procedures, and troubleshooting information is provided.
- Failure codes, fuse locations, and other diagnostic information is listed to assist with repairs.
Mc cormick c l europa tier 2 (2007-2008) - rs50 - 70 tractor service repair m...fdusjejkskem
This document contains a list of engine components for a McCormick tractor. It includes over 140 individual parts with descriptions, part numbers, quantities needed, and other technical specifications. The parts are for the engine, fuel system, valves, pistons, bearings, gears, and other internal components. The document provides replacement and overhaul instructions for the different tractor models and engine types.
Mc cormick bmax tier 3 (2011 ) - rt64 - 100 tractor service repair manualfdusjejkskem
This document contains parts information for engines and components. It lists part numbers, descriptions, and indicates whether parts are for replacement or reference purposes. Serial or engine numbers are referenced for some parts to indicate applicability. Kit designations and tolerance specifications are also provided for some items.
Mc cormick bmax tier 3 (2011 ) - rt64 - 90 tractor service repair manualfdusjejkskem
This document provides parts information for an engine, including:
- Part numbers, serial numbers, replacement kits, and other identifying information for various engine components
- Quantity and other specification information for replacements
- Notes on components that are part of assemblies and not individually serviced
The parts cover multiple engine models and ranges of serial numbers.
Mc cormick bmax tier 3 (2011 ) - rt64 - 80 tractor service repair manualfdusjejkskem
This document contains parts listings and component information for an engine. It includes over 125 individual part listings with information like part numbers, serial numbers, replacement parts, and component types. The parts are for items like the cylinder block, pistons, valves, pumps, sensors and other engine components.
Mc cormick bmax (2007 ) - rt62 - 100 tractor service repair manualfdusjejkskem
This document provides part numbers and component information for engine repairs. It includes listings of parts, part numbers, kits, and specifications needed to repair items like cylinders, pistons, pumps, housings, and other engine components. Quantities of parts and application ranges based on tractor serial numbers are also provided. The document appears to be from an engine repair manual or parts catalog.
Mc cormick 9 7 series (2014- ) - rs37 - 7070 - 7080 arm tractor service repai...fdusjejkskem
This document contains parts listings and diagrams for components of McCormick RS37 model 7070 and 7080 engines. It lists part numbers, names, and other identifying information for items like blocks, heads, crankcases, manifolds, and other internal engine parts. Notes provide information on applications, specifications like lengths and diameters, and whether parts are replacement options. The parts are depicted visually in diagrams to show their place in the engine assembly.
Mc cormick (2011 ) - rs43 - 6450 ism-vrm tractor service repair manualfdusjejkskem
This document provides part numbers and descriptions for components that make up various tractor assemblies. It includes information like part names and numbers, quantities needed, and application details. Replacement part designations and quantities per tractor are also provided for some items. Images are referenced for additional information.
Komatsu wa250 6 wheel loader service repair manual sn75001 and upfdusjejkskem
This document provides information about Komatsu wheel loaders, including:
- The shop manual covers models WA250-6 and WA250PZ-6.
- Specifications for the engines, cooling systems, power trains, steering systems, brake systems, hydraulics systems, and other components are included.
- Standard values, testing and adjustment procedures, and troubleshooting information is provided.
- Failure codes, fuse locations, and other diagnostic information is listed to assist with repairs.
Komatsu d31 pl 20 dozer bulldozer service repair manualfdusjejkskem
This shop manual provides instructions for maintenance and repair of Komatsu bulldozers. It details the removal and installation procedures for components like the starting motor and alternator. Safety precautions are outlined, emphasizing the importance of following proper service procedures, wearing protective equipment, and taking safety measures like blocking equipment before starting work. The manual contents include general information, structure and function, testing and adjusting, disassembly and assembly, and maintenance standards.
Komatsu d31 p 20a dozer bulldozer service repair manualfdusjejkskem
This shop manual provides instructions for maintenance and repair of Komatsu bulldozers. It details the disassembly and assembly procedures for components like the starting motor and alternator. Safety precautions are outlined, emphasizing the importance of following proper service procedures, wearing protective equipment, and taking safety measures like blocking equipment before starting work. The manual contents include general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other sections.
Komatsu d31 p 20 dozer bulldozer service repair manualfdusjejkskem
- The document is a shop manual that provides instructions for maintenance and repair of Komatsu bulldozers.
- It contains safety notices and general precautions for working on equipment. Proper personal protective equipment and safety procedures are emphasized.
- The document is divided into sections covering general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics.
- Specific instructions are provided for removal and installation of components like the starting motor and alternator. Torque specifications and other details are given.
Komatsu d31 e 20 dozer bulldozer service repair manualfdusjejkskem
This document provides instructions for servicing components of Komatsu bulldozers, including removal and installation of the starting motor, alternator, and engine oil cooler core. Key steps include disconnecting battery cables and electrical connections, loosening mounting hardware, and reinstalling components in reverse order while following tightening specifications and adjusting components as needed. Safety precautions are provided to prevent injury when working on pressurized systems and around moving parts.
Komatsu d21 a,p 8 dozer bulldozer service repair manual (sn 83001 and up)fdusjejkskem
This shop manual provides instructions for servicing a Komatsu D21A, P-8 bulldozer with a serial number of 83001 or higher. The manual contains sections on general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics. This section specifically describes how to remove the fuel injection pump assembly. It outlines 14 steps to disconnect hoses, remove mounting nuts, and take note of alignment marks to ensure proper reinstallation of the fuel injection pump and related components. Precautions are provided to prevent dropping parts and maintaining proper alignment of gears.
Komatsu 12 v170 1 diesel engine service repair manualfdusjejkskem
This shop manual provides instructions for servicing a Komatsu 12v17 diesel engine. It contains sections on the engine's structure and function, testing and adjusting procedures, disassembly and assembly instructions, maintenance standards, and repair/replacement of parts. Technicians are advised to follow the safety precautions outlined and contact their distributor for the latest revision of the manual.
John deere 500 trail buck utility atv service repair manual (tm2160)fdusjejkskem
This technical manual provides repair and maintenance instructions for the Trail Buck Utility ATV. It contains sections covering specifications, identification numbers, tools, component locations, schematics, theory of operation, diagnostics, tests, repairs and other topics. The manual is intended for experienced technicians and is organized so that information on each system is kept together. Safety precautions are outlined at the beginning, including proper lifting of equipment, handling of fluids, battery safety, protective clothing, and more. Procedures for front drive shaft removal and installation are also described.
John deere 500 buck utility atv service repair manual (tm2153)fdusjejkskem
The document is a technical manual section about front drive repair for a John Deere utility ATV. It includes instructions for removing and installing the front drive shaft, including inspecting the drive shaft boots. It also provides procedures for removing and installing the front differential, including how to measure and adjust the differential backlash. Images and diagrams accompany the text to illustrate the procedures. Safety information is included at the beginning to warn technicians to support the vehicle properly when working underneath.
John deere 315 d side shift loader service repair technical manual (tm1497)fdusjejkskem
- The document provides repair information for the reverser, reverse brake, forward clutch, and planetary assembly of 300D, 310D, and 315D backhoe loaders.
- It describes how to remove and disassemble the front cover and reverse brake, including inspecting parts for wear.
- Procedures are provided for removing and disassembling the input shaft and forward clutch, and removing the planetary assembly and bearing retainer.
- Detailed step-by-step instructions are given for assembling the input shaft and forward clutch.
John deere 314 f walk behind tillers service repair manual (tm1687)fdusjejkskem
This technical manual provides instructions for servicing John Deere walk-behind tillers models 314F, 518R, and 820R. It contains sections on specifications, components, schematics, troubleshooting, repairs, and safety information. The manual is intended for experienced technicians and organized with headings to guide readers to relevant information for completing jobs. It also provides contact information for feedback to improve future manuals.
John deere 310 d backhoe loaders service repair technical manual (tm1497)fdusjejkskem
- The document provides repair information for the reverser, reverse brake, forward clutch, and planetary assembly of 300D, 310D, and 315D backhoe loaders.
- It describes removing and disassembling the front cover and reverse brake, removing and disassembling the input shaft and forward clutch, and removing the planetary assembly and bearing retainer.
- Step-by-step instructions are given for assembling the input shaft and forward clutch.
John deere 35 g (sn. from k270001) compact excavator service repair technical...fdusjejkskem
The document provides instructions for removing and installing a sprocket, front idler, track adjuster, and recoil spring on an excavator. It describes removing components like the track and cap screws holding parts in place. Precautions are outlined and specifications provided for torque values and part weights. Detailed steps cover disassembling, inspecting, lubricating, and reassembling parts like the front idler and track adjuster using specialized tools.
John deere 4x2 and 4x6 gator utility vehicle service repair manual (tm1518)fdusjejkskem
This document provides specifications and information related to the power train and gear system for John Deere Gator utility vehicles. It includes specifications such as drive belt width, clutch engagement speeds, secondary clutch spring torque specifications, chain tension for 6x4 models, chain size and length for 6x4 models, and torque specifications for secondary clutch mounting cap screws. The document is intended as a technical reference for experienced technicians working on these vehicle systems.
Liebherr r954 c 1328 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1276 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of hazards.
Liebherr r954 c 1175 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1128 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1120 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r944 c 1000 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of hazards.
Liebherr r944 c 793 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Komatsu d31 pl 20 dozer bulldozer service repair manualfdusjejkskem
This shop manual provides instructions for maintenance and repair of Komatsu bulldozers. It details the removal and installation procedures for components like the starting motor and alternator. Safety precautions are outlined, emphasizing the importance of following proper service procedures, wearing protective equipment, and taking safety measures like blocking equipment before starting work. The manual contents include general information, structure and function, testing and adjusting, disassembly and assembly, and maintenance standards.
Komatsu d31 p 20a dozer bulldozer service repair manualfdusjejkskem
This shop manual provides instructions for maintenance and repair of Komatsu bulldozers. It details the disassembly and assembly procedures for components like the starting motor and alternator. Safety precautions are outlined, emphasizing the importance of following proper service procedures, wearing protective equipment, and taking safety measures like blocking equipment before starting work. The manual contents include general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other sections.
Komatsu d31 p 20 dozer bulldozer service repair manualfdusjejkskem
- The document is a shop manual that provides instructions for maintenance and repair of Komatsu bulldozers.
- It contains safety notices and general precautions for working on equipment. Proper personal protective equipment and safety procedures are emphasized.
- The document is divided into sections covering general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics.
- Specific instructions are provided for removal and installation of components like the starting motor and alternator. Torque specifications and other details are given.
Komatsu d31 e 20 dozer bulldozer service repair manualfdusjejkskem
This document provides instructions for servicing components of Komatsu bulldozers, including removal and installation of the starting motor, alternator, and engine oil cooler core. Key steps include disconnecting battery cables and electrical connections, loosening mounting hardware, and reinstalling components in reverse order while following tightening specifications and adjusting components as needed. Safety precautions are provided to prevent injury when working on pressurized systems and around moving parts.
Komatsu d21 a,p 8 dozer bulldozer service repair manual (sn 83001 and up)fdusjejkskem
This shop manual provides instructions for servicing a Komatsu D21A, P-8 bulldozer with a serial number of 83001 or higher. The manual contains sections on general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics. This section specifically describes how to remove the fuel injection pump assembly. It outlines 14 steps to disconnect hoses, remove mounting nuts, and take note of alignment marks to ensure proper reinstallation of the fuel injection pump and related components. Precautions are provided to prevent dropping parts and maintaining proper alignment of gears.
Komatsu 12 v170 1 diesel engine service repair manualfdusjejkskem
This shop manual provides instructions for servicing a Komatsu 12v17 diesel engine. It contains sections on the engine's structure and function, testing and adjusting procedures, disassembly and assembly instructions, maintenance standards, and repair/replacement of parts. Technicians are advised to follow the safety precautions outlined and contact their distributor for the latest revision of the manual.
John deere 500 trail buck utility atv service repair manual (tm2160)fdusjejkskem
This technical manual provides repair and maintenance instructions for the Trail Buck Utility ATV. It contains sections covering specifications, identification numbers, tools, component locations, schematics, theory of operation, diagnostics, tests, repairs and other topics. The manual is intended for experienced technicians and is organized so that information on each system is kept together. Safety precautions are outlined at the beginning, including proper lifting of equipment, handling of fluids, battery safety, protective clothing, and more. Procedures for front drive shaft removal and installation are also described.
John deere 500 buck utility atv service repair manual (tm2153)fdusjejkskem
The document is a technical manual section about front drive repair for a John Deere utility ATV. It includes instructions for removing and installing the front drive shaft, including inspecting the drive shaft boots. It also provides procedures for removing and installing the front differential, including how to measure and adjust the differential backlash. Images and diagrams accompany the text to illustrate the procedures. Safety information is included at the beginning to warn technicians to support the vehicle properly when working underneath.
John deere 315 d side shift loader service repair technical manual (tm1497)fdusjejkskem
- The document provides repair information for the reverser, reverse brake, forward clutch, and planetary assembly of 300D, 310D, and 315D backhoe loaders.
- It describes how to remove and disassemble the front cover and reverse brake, including inspecting parts for wear.
- Procedures are provided for removing and disassembling the input shaft and forward clutch, and removing the planetary assembly and bearing retainer.
- Detailed step-by-step instructions are given for assembling the input shaft and forward clutch.
John deere 314 f walk behind tillers service repair manual (tm1687)fdusjejkskem
This technical manual provides instructions for servicing John Deere walk-behind tillers models 314F, 518R, and 820R. It contains sections on specifications, components, schematics, troubleshooting, repairs, and safety information. The manual is intended for experienced technicians and organized with headings to guide readers to relevant information for completing jobs. It also provides contact information for feedback to improve future manuals.
John deere 310 d backhoe loaders service repair technical manual (tm1497)fdusjejkskem
- The document provides repair information for the reverser, reverse brake, forward clutch, and planetary assembly of 300D, 310D, and 315D backhoe loaders.
- It describes removing and disassembling the front cover and reverse brake, removing and disassembling the input shaft and forward clutch, and removing the planetary assembly and bearing retainer.
- Step-by-step instructions are given for assembling the input shaft and forward clutch.
John deere 35 g (sn. from k270001) compact excavator service repair technical...fdusjejkskem
The document provides instructions for removing and installing a sprocket, front idler, track adjuster, and recoil spring on an excavator. It describes removing components like the track and cap screws holding parts in place. Precautions are outlined and specifications provided for torque values and part weights. Detailed steps cover disassembling, inspecting, lubricating, and reassembling parts like the front idler and track adjuster using specialized tools.
John deere 4x2 and 4x6 gator utility vehicle service repair manual (tm1518)fdusjejkskem
This document provides specifications and information related to the power train and gear system for John Deere Gator utility vehicles. It includes specifications such as drive belt width, clutch engagement speeds, secondary clutch spring torque specifications, chain tension for 6x4 models, chain size and length for 6x4 models, and torque specifications for secondary clutch mounting cap screws. The document is intended as a technical reference for experienced technicians working on these vehicle systems.
Liebherr r954 c 1328 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1276 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of hazards.
Liebherr r954 c 1175 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1128 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r954 c 1120 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Liebherr r944 c 1000 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of hazards.
Liebherr r944 c 793 hydraulic excavator service repair manualfdusjejkskem
This document is a service manual for Liebherr hydraulic excavators that provides technical specifications and maintenance instructions. It contains sections on general information, tools, technical data, the engine, hydraulic and electrical systems, undercarriage components, and other optional equipment. The manual is intended to assist customer support and maintenance personnel but does not replace proper training. Safety symbols are defined and safety instructions provided throughout to warn technicians of dangers.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. Section F2 - Transmission
Wheels and Tyres
Removal and Replacement
F2-4 F2-4F-02-03 Issue 01
Removal and Replacement
Front Wheels
Important: The wheel and tyre assembly is heavy. Get the
aid of one more person to remove and replace a wheel.
!MWARNING
A raised and badly supported machine can fall on you.
Position the machine on a firm, level surface before
raising one end. Ensure the other end is securely
chocked. Do not rely solely on the machine hydraulics
or jacks to support the machine when working under
it.
Disconnect the battery, to prevent the engine being
started while you are beneath the machine.
GEN-1-1
Removal (one wheel)
1 Park the machine and make it safe. Fit the boom
safety strut. Obey the care and safety procedures.
K Related Topics ( T F2-2)
2 Make sure that the engine cannot be started.
3 Put chocks A under the rear wheels.
4 Loosen the five wheel nuts B by half a turn.
5 Put a jack C under the axle arm. Use the correct jack.
6 Use the jack to lift the machine until the front wheel D
is off the ground.
7 Put chocks E under the axle arm.
8 Hold the wheel D and remove the wheel nuts B.
9 Remove the wheel.
Replacement
Note: Make sure that the mating surfaces of the wheel and
axle hub are clean.
!MWARNING
If, for whatever reason, a wheel stud is renewed, all the
studs for that wheel must be changed as a set, since
the remaining studs may have been damaged.
2-3-2-8
Replacement is the opposite of the removal procedure.
During the replacement procedure do this work also:
– Torque tighten the nuts B.
When the replacement procedure is complete:
– Check the wheel nut torques are correct after every
two hours of machine operation until they stay
correct.
Table 3. Torque Settings
C045590
Fig 1.
Item Nm kgf m lbf ft
B(1)
(1) 550-80 machines
650 66 480
B(2)
(2) Other machines
680 69 500
3. Section F2 - Transmission
Wheels and Tyres
Removal and Replacement
F2-5 F2-5F-02-03 Issue 01
Rear Wheels
Important: The wheel and tyre assembly is heavy. Get the
aid of one more person to remove and replace a wheel.
!MWARNING
A raised and badly supported machine can fall on you.
Position the machine on a firm, level surface before
raising one end. Ensure the other end is securely
chocked. Do not rely solely on the machine hydraulics
or jacks to support the machine when working under
it.
Disconnect the battery, to prevent the engine being
started while you are beneath the machine.
GEN-1-1
Removal (one wheel)
1 Park the machine and make it safe. Fit the boom
safety strut. Obey the care and safety procedures.
K Related Topics ( T F2-2)
2 Make sure that the engine cannot be started.
3 Put chocks A under the front wheels.
4 Loosen the five wheel nuts B by half of one turn.
5 Put a jack C under the centre of the rear axle. Use the
correct jack.
6 Use the jack to lift the machine until both rear wheels
are off the ground.
7 Put chocks E under each end of the rear axle.
8 Hold the wheel D and remove the wheel nuts.
9 Remove the wheel.
Replacement
Note: Make sure that the mating surfaces of the wheel and
axle hub are clean.
!MWARNING
If, for whatever reason, a wheel stud is renewed, all the
studs for that wheel must be changed as a set, since
the remaining studs may have been damaged.
2-3-2-8
Replacement is the opposite of the removal procedure.
During the replacement procedure do this work also:
– Torque tighten the nuts B.
When the replacement procedure is complete:
– Check the wheel nut torques are correct after every
two hours of machine operation until they stay
correct.
Table 4. Torque Settings
C045590
Fig 2.
Item Nm kgf m lbf ft
B(1)
(1) 550-80 machines
650 66 480
B(2)
(2) Other machines
680 69 500
4. Section F2 - Transmission
Wheels and Tyres
Removal and Replacement
F2-6 F2-6F-02-03 Issue 01
Wheel Studs
Removal and Replacement
The procedures that follow are for one wheel stud. The
procedures are the same for all the wheel studs.
!MWARNING
If, for whatever reason, a wheel stud is renewed, all the
studs for that wheel must be changed as a set, since
the remaining studs may have been damaged.
2-3-2-8
Removal
1 Remove the wheel from the hub. K Front
Wheels ( T F2-4) K Rear Wheels ( T F2-5)
2 Push out the wheel stud 3-A.
Important: Remove all the wheel studs 3-A and discard
them.
C045650
Fig 3.
Replacement
Important: Examine the wheel stud holes 4-B in the hub
carrier 4-C. If the holes are defective do not use the hub
carrier. Replace the hub carrier with a new one. Refer to
Applications for related axle topics. K Related
Topics ( T F2-2)
1 Put the stud 4-A into the hub carrier hole.
2 Use a nut and washer to pull in the stud 4-A into the
hub carrier 4-C.
3 Examine the stud and make sure it is correctly
installed. If the stud is loose replace the hub carrier 4-
C. Refer to Applications for related axle topics.
K Related Topics ( T F2-2)
C045650-C1
Fig 4.
5. Section F3 - Transmission
Front Axles
Introduction
F3-1 F3-1F-03-10 Issue 01
Front Axles
Introduction
Table 1. Procedure and Specification Variants
This topic contains information about a machine DEVICE. Make sure you are referring to the correct device. Refer to the
applications table.
Descriptions and procedures relate to the device and not related systems. For information about the systems refer to the
relevant topics.
This topic is intended to help you understand what the device does and how it works. Where applicable it also includes
procedures such as removal and replacement and dismantle and assemble.
K Related Topics ( T F3-2)
K Specifications ( T F3-3)
K SD80 3 Piece Steer Drive Axle ( T F3-3)
K Component Identification ( T F3-4)
K Renewing the Pinion Oil Seal ( T F3-6)
K Removal and Replacement - SD80 Fixed Axle ( T F3-7)
K Removal and Replacement - SD80 Pivot Sway Axle ( T F3-9)(1)
(1) Procedure variant. Make sure you refer to the correct procedure.
K Removal and Replacement - SD80 Trunnion Sway Axle ( T F3-12)(1)
K Dismantle, Inspection and Assembly ( T F3-15)
Procedures, Specifications(1)
(1) The table lists procedure and specification variants and the applicable machine models. Use the table to make sure
you refer to the correct information.
Machine Model Application
540-170
5AF
550-140
5AG
540-140
5AL
550-170
5AM
535-125
HiViz
5AN
535-140
HiViz
5AP
540-200
K Removal and Replacement - SD80 Pivot
Sway Axle ( T F3-9)
K Removal and Replacement - SD80
Trunnion Sway Axle ( T F3-12)
6. Section F3 - Transmission
Front Axles
Related Topics
F3-2 F3-2F-03-10 Issue 01
Related Topics
Table 2. Related Topics in This Publication
Table 3. Related Topics in Publication 9803/8610, Transmissions
The table lists other topics in the manual that contain information related to this topic. Refer to the applicable
topics to complete your procedures. Where applicable the text in this section contains cross references to this
page to help you find the correct information. Some machines have different systems and devices. Make sure
you refer to the correct topic, refer to Section 1 - Applications.
Sections Topic Titles Sub Titles
1 Applications ALL
2 ALL (Care and Safety)(1)
(1) You must obey all of the relevant care and safety procedures.
ALL
3 Maintenance ALL
F Applications ALL
F Rear Axles Renewing the Pinion Oil Seal
G Service Brakes SYSTEM Bleeding
H Steering SYSTEM Bleeding
H Steering SYSTEM Re-Phasing
The table lists topics in another manual that contain information related to this topic. Refer to the applicable
topics to complete your procedures. Where applicable the text in this section contains cross references to this
page to help you find the correct information. Some machines have different systems and devices. Make sure
you refer to the correct topics, refer to Designations. K Specifications ( T F3-3)
Sections Section Titles Topic Titles
A Axle Hubs 80 Series Hub
B Axle Hub Swivels and Driveshafts 55 Series Hub Swivel and Driveshaft
C Axle Integral Brakes 70 Series Integral Brakes (3 Piece Axles)
D Axle Drive Heads 80 Series Drive Heads (3 Piece Axles)
7. Section F3 - Transmission
Front Axles
Specifications
F3-3 F3-3F-03-10 Issue 01
Specifications
The axle serial number is stamped on the unit identification
plate A as shown.
Fig 1.
Note: It is essential that the correct ratio axle in
relationship to the gearbox ratio is fitted to the machine. Do
not fit a new axle with a different ratio to the axle being
replaced.
Table 4. SD80 3 Piece Steer Drive Axle
Designations
Hubs 80 Series
Hub swivels and drive shafts 55 Series
Drive head 80 Series 3 piece
Brakes 70 Series Integral Brakes (3 Piece Axles)
Type JCB spiral bevel input with epicyclic hub reduction
Brakes Oil immersed multi-plate discs, located in centre section
Steering Steer rams or power track rod
8. Section F3 - Transmission
Front Axles
Component Identification
F3-4 F3-4F-03-10 Issue 01
Component Identification
The illustration shows a typical 3 piece steer drive front
axle. K Fig 2. ( T F3-5)
The front axle consists of a centre casing (drivehead) and
two axle arms and swivel wheel hubs.
The drivehead houses the differential gearing and two oil-
immersed disc brake units.
The axle arms house the driveshafts. Specially shaped
spider gears in the differential provide `torque
proportioning'. This means that drive power will be kept on
one wheel if the other is slipping.
The wheel hubs are connected to the halfshafts through
universal joints which drive sun-and-planet gears inside
the hubs.
A Yoke connection to propshaft
B Pinion
C Crownwheel
D Differential unit
Note: Items A, B, C and D form the `drive head' part of
the axle.
E Drive shaft
F Universal coupling
G Reduction gear hub
H Steer swivel trunnion bearings
L Inboard oil-immersed multi-plate disc brakes
M Brake actuating piston
N Hydraulic brake lines
10. Section F3 - Transmission
Front Axles
Renewing the Pinion Oil Seal
F3-6 F3-6F-03-10 Issue 01
Renewing the Pinion Oil Seal
The front axle pinion oil seal is renewed using the same
procedure as described for the rear axles. K Related
Topics ( T F3-2)
11. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Fixed Axle
F3-7 F3-7F-03-10 Issue 01
Removal and Replacement - SD80 Fixed Axle
!MWARNING
A raised and badly supported machine can fall on you.
Position the machine on a firm, level surface before
raising one end. Ensure the other end is securely
chocked. Do not rely solely on the machine hydraulics
or jacks to support the machine when working under
it.
Disconnect the battery, to prevent the engine being
started while you are beneath the machine.
GEN-1-1
If the boom is raised, make sure the maintenance strut is
fitted. Obey the care and safety procedures. K Related
Topics ( T F3-2)
K Fig 3. ( T F3-8)
Note: Some machines may have shims installed on the
axle mounts. Make sure to note the position and quantity
of these shims before removal. Make sure to retain the
shims and replace them in the correct position when
replacing the axle. There may be an uneven number of
shims between each side of the axle as the shims are used
to adjust the machine height and make it level.
Removal
1 Disconnect the propshaft coupling from the axle by
unscrewing bolts A.
!MWARNING
When the driveshaft is disconnected the park brake
will no longer function. The machine must be securely
blocked to prevent any machine movement before
disconnecting the driveshaft.
TRANS-1-3
2 Disconnect and plug the hydraulic hoses to the steer
rams/ power track rod.
3 Slacken off the roadwheel retaining nuts C then raise
and support the front end of the machine on axle
stands or blocks positioned under the chassis.
Remove the front roadwheels.
4 Remove the front mudguards. Undo the bracket
retaining nuts E at the steering trunnions.
5 Disconnect the brake hose at the axle. Blank off the
exposed connections.
6 Uncouple the steer proximity switch electrical
connector (if fitted).
7 Support the axle on a trolley jack.
8 Unscrew axle mounting nuts D and remove the bolts
and washers.
9 Lower the axle down from the machine.
10 Remove the axle from the machine.
Replacement
Replacement is the opposite of the removal procedure.
During replacement do this work also:
– Bleed the brake system, see Section G - Brakes.
K Related Topics ( T F3-2)
– Refit the road wheels and carry out the tightness
checks as detailed in Section 3 - Routine
Maintenance. K Related Topics ( T F3-2)
– Bleed the steering system, see Section H - Steering.
K Related Topics ( T F3-2)
– Re-phase the steering system, see Section H -
Steering. K Related Topics ( T F3-2)
– Grease the axle pivot trunnions.
Table 5. Torque Settings
Item Nm kgf m lbf ft
A 78 8 57
B 56 5.7 41
C 680 69 500
D (1)
(1) Dry nuts.
969 99 715
D (2)
(2) Nuts with special dry lubricating film.
600 60 440
E 98 10 72
12. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Fixed Axle
F3-8 F3-8F-03-10 Issue 01
Fig 3. SD80 Fixed Axle
E
B
C
A
D
13. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Pivot Sway Axle
F3-9 F3-9F-03-10 Issue 01
Removal and Replacement - SD80 Pivot Sway Axle
!MWARNING
A raised and badly supported machine can fall on you.
Position the machine on a firm, level surface before
raising one end. Ensure the other end is securely
chocked. Do not rely solely on the machine hydraulics
or jacks to support the machine when working under
it.
Disconnect the battery, to prevent the engine being
started while you are beneath the machine.
GEN-1-1
If the boom is raised, make sure the maintenance strut is
fitted. Obey the care and safety procedures.K Related
Topics ( T F3-2)
Removal K Fig 5. ( T F3-11)
Removal
1 Disconnect the propshaft coupling from the axle by
unscrewing bolts A.
!MWARNING
When the driveshaft is disconnected the park brake
will no longer function. The machine must be securely
blocked to prevent any machine movement before
disconnecting the driveshaft.
TRANS-1-3
2 Disconnect and plug the hydraulic hoses to the steer
rams.
3 Slacken off the roadwheel retaining nuts C then raise
and support the front end of the machine on support
stands or blocks positioned under the chassis.
Remove the front roadwheels.
4 Remove the front mudguards. Undo the bracket
retaining nuts K at the steering trunnions.
5 Disconnect the brake hose at the axle. Blank off the
exposed connections.
6 Uncouple the steer proximity switch electrical
connector (if fitted).
7 Undo bolt D and remove pivot pin E.
8 Undo the sway ram pivot bracket mounting bolts H.
Lift away the bracket.
9 Support the axle on a trolley jack.
10 Undo bolt F and remove pivot pin G.
11 Remove the axle from the machine.
Replacement
Replacing is generally the reverse of the removal
sequence.
Replacement is the opposite of the removal procedure.
During replacement do this work also:
– Bleed the brake system, see Section G - Brakes.
K Related Topics ( T F3-2)
– Adjust the sway sight rod M so that the top of the rod
is in line with the top of the tube L when the machine
is horizontal. To adjust this slacken the locknuts N and
screw the sight rod up or down to the correct position.
Tighten the locknuts when the position is correct.
K Fig 4. ( T F3-10)
– Refit the road wheels and carry out the tightness
checks as detailed in Section 3 - Routine
Maintenance. K Related Topics ( T F3-2)
– Bleed the steering system, see Section H - Steering.
K Related Topics ( T F3-2)
– Re-phase the steering system, see Section H -
Steering. K Related Topics ( T F3-2)
– Grease the axle pivot trunnions.
14. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Pivot Sway Axle
F3-10 F3-10F-03-10 Issue 01
C127500
Fig 4.
Table 6. Torque Settings
Item Nm kgf m lbf ft
A 78 8 57
B 56 5.7 41
C 680 69 500
H 969 99 715
K 98 10 72
L
M
N
N
15. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Pivot Sway Axle
F3-11 F3-11F-03-10 Issue 01
Fig 5. SD80 Pivot Sway Axle
K
E
D
G
J
A
B
F
H
C
16. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Trunnion Sway Axle
F3-12 F3-12F-03-10 Issue 01
Removal and Replacement - SD80 Trunnion Sway Axle
!MWARNING
A raised and badly supported machine can fall on you.
Position the machine on a firm, level surface before
raising one end. Ensure the other end is securely
chocked. Do not rely solely on the machine hydraulics
or jacks to support the machine when working under
it.
Disconnect the battery, to prevent the engine being
started while you are beneath the machine.
GEN-1-1
If the boom is raised, make sure the maintenance strut is
fitted. Obey the care and safety procedures.K Related
Topics ( T F3-2)
Removal
1 Disconnect the propshaft coupling from the axle by
unscrewing bolts A.
!MWARNING
When the driveshaft is disconnected the park brake
will no longer function. The machine must be securely
blocked to prevent any machine movement before
disconnecting the driveshaft.
TRANS-1-3
2 Disconnect and plug the hydraulic hoses G to the
power track rod.
3 Slacken off the roadwheel retaining nuts then raise
and support the front end of the machine on support
stands or blocks positioned under the chassis.
Remove the front roadwheels.
4 Remove the front mudguards. Undo the bracket
retaining nuts F at the steering trunnions.
5 Disconnect the brake hose at the axle. Blank off the
exposed connections.
6 Uncouple the steer proximity switch K electrical
connector (if fitted).
7 Undo bolt D and remove pivot pin E.
8 Undo the sway ram pivot bracket mounting bolts H.
Lift away the bracket.
Fig 6.
9 Remove the access plate screws M and lift off the
plate N to get access to the front trunnion bolts.
10 Support the axle on a trolley jack.
11 Undo the six trunnion bolts B and nuts C. The top of
the bolts can be accessed from underneath the boom
as shown at L and below the access cover N.
12 Remove the axle from the machine. Be sure to
retrieve dowels J. If shims are fitted record their
positions. Use some wire to tie the trunnions to the
axle.
C053980
L
M
N
17. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Trunnion Sway Axle
F3-13 F3-13F-03-10 Issue 01
Replacement
Replacement is the opposite of the removal procedure.
During replacement do this work also:
– Bleed the brake system, see Section G - Brakes.
K Related Topics ( T F3-2)
– Adjust the sway sight rod Y so that the top of the rod
is in line with the top of the tube X when the machine
is horizontal. To adjust this slacken the locknuts Z and
screw the sight rod up or down to the correct position.
Tighten the locknuts when the position is correct.
K Fig 7. ( T F3-13)
– Make sure you re-fit dowels J together with any shims
in their original positions.
– Make sure that the axle oscillates freely before final
tightening of the fixing bolts.
– Refit the road wheels and carry out the tightness
checks as detailed in Section 3 - Routine
Maintenance. K Related Topics ( T F3-2)
– Bleed the steering system, see Section H - Steering.
K Related Topics ( T F3-2)
– Re-phase the steering system, see Section H -
Steering. K Related Topics ( T F3-2)
– Grease the axle pivot trunnions.
C127500-C1
Fig 7.
Table 7. Torque Settings
Item Nm kgf m lbf ft
A 78 8 57
B 476 48 352
C 476 48 352
H 600 60 440
F 98 10 72
X
Y
Z
Z
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Trunnion Sway Axle
F3-14 F3-14F-03-10 Issue 01
Fig 8. SD80 Trunnion Axle
A312090-C2
F
D
B
G
G J
J
C
J
J
E
K
H
A
A
20. Section F3 - Transmission
Front Axles
Dismantle, Inspection and Assembly
F3-15 F3-15F-03-10 Issue 01
Dismantle, Inspection and Assembly
Make sure that you identify the axle sub-assemblies
designations correctly. K Specifications ( T F3-3)
The procedures for dismantling, inspection and assembly
are described in the Transmissions Service Manual.
K Related Topics ( T F3-2)