This document provides information about torque settings for fasteners on JCB machines. It discusses zinc plated fasteners, Dacromet fasteners, and the different torque values that should be used depending on the type of fastener and its surface treatment. Dacromet fasteners have a lower torque setting than zinc or yellow plated fasteners. The document provides tables of torque settings to use for zinc/yellow plated fasteners in unlubricated and lubricated conditions, and for Dacromet fasteners. It stresses that the correct torque must be used depending on the fastener type.
This document contains parts listings and diagrams for the engine of a Massey Ferguson 1260 compact tractor. It includes 16 pages detailing over 200 individual parts across several engine systems like the cylinder head, cylinder block, crankcase, timing gears, valves and more. Each part is identified by number, description, and quantity required. Diagrams visually show the location and relationship between parts.
This document provides a parts list for table augers and knives/fingers used on Massey Ferguson MF 7274/7278 combines. It includes over 140 individual part numbers, descriptions, and other details. The parts are used for both 20-foot and 22-foot header widths. Key components listed include table auger bodies, bearings, shafts, plates, fingers, knives, guards, springs, and fasteners. Serial numbers are provided to indicate applicability of specific parts.
Massey ferguson mf 845 combines parts catalogue manualofpsdjksemmds
The document contains parts lists and diagrams for Massey Ferguson MF 840/845 combines. It lists over 50 individual parts for the engine and accessories, including the cylinder block, crankshaft, cylinder head, rocker arm assembly and other components. Each part is given an item number, part number, quantity, description and any relevant comments. Diagrams illustrate the layout and components of the engine systems.
Massey ferguson mf 865 combines ( 174619115) parts catalogue manualofpsdjksemmds
This document provides the parts list and descriptions for the paddle elevator, shafts and drives, and table to cylinder components of Massey Ferguson MF 860/865 combines. It contains over 90 line items with part numbers, quantities, descriptions, and additional comments for various parts. Reference information is provided at the end of each section to indicate applicability of certain parts based on combine model or configuration.
Massey ferguson mf 840 combines parts catalogue manualofpsdjksemmds
The document contains parts lists and diagrams for Massey Ferguson MF 840/845 combines. It lists over 50 individual parts for the engine and related systems, including the cylinder block, crankshaft, cylinder head, rocker arm assembly, and other parts. Each part is given an item number, part number, quantity, description, and any relevant comments. Diagrams illustrate the layout and components of the engine and related systems.
Massey ferguson mf 825 combines parts catalogue manualofpsdjksemmds
The document contains parts lists and technical specifications for Massey Ferguson MF 820/825 combines. It includes detailed lists of parts for the engine, cylinder block, flywheel housing, flywheel and starter ring, crankshaft, pistons, connecting rods, and cylinder head. Each part is accompanied by descriptions and part numbers to facilitate repairs or replacements.
Massey ferguson mf 820 combines parts catalogue manualofpsdjksemmds
The document contains parts lists and technical specifications for Massey Ferguson MF 820/825 combines. It includes detailed lists of parts for the engine, cylinder block, flywheel housing, flywheel and starter ring, crankshaft, pistons, connecting rods, and cylinder head. Each part is accompanied by descriptions and part numbers to facilitate repairs or replacements.
Massey ferguson mf 805 combines parts catalogue manualofpsdjksemmds
The document provides parts information for Massey Ferguson MF 800/805 combines, including:
1. A table of contents listing engine and accessories parts.
2. Details on engine cylinder block parts including liners, plugs, and housing.
3. A diagram and parts list for the engine flywheel housing.
4. Information on the engine crankshaft, pistons, connecting rods, and cylinder head parts.
This document contains parts listings and diagrams for the engine of a Massey Ferguson 1260 compact tractor. It includes 16 pages detailing over 200 individual parts across several engine systems like the cylinder head, cylinder block, crankcase, timing gears, valves and more. Each part is identified by number, description, and quantity required. Diagrams visually show the location and relationship between parts.
This document provides a parts list for table augers and knives/fingers used on Massey Ferguson MF 7274/7278 combines. It includes over 140 individual part numbers, descriptions, and other details. The parts are used for both 20-foot and 22-foot header widths. Key components listed include table auger bodies, bearings, shafts, plates, fingers, knives, guards, springs, and fasteners. Serial numbers are provided to indicate applicability of specific parts.
Massey ferguson mf 845 combines parts catalogue manualofpsdjksemmds
The document contains parts lists and diagrams for Massey Ferguson MF 840/845 combines. It lists over 50 individual parts for the engine and accessories, including the cylinder block, crankshaft, cylinder head, rocker arm assembly and other components. Each part is given an item number, part number, quantity, description and any relevant comments. Diagrams illustrate the layout and components of the engine systems.
Massey ferguson mf 865 combines ( 174619115) parts catalogue manualofpsdjksemmds
This document provides the parts list and descriptions for the paddle elevator, shafts and drives, and table to cylinder components of Massey Ferguson MF 860/865 combines. It contains over 90 line items with part numbers, quantities, descriptions, and additional comments for various parts. Reference information is provided at the end of each section to indicate applicability of certain parts based on combine model or configuration.
Massey ferguson mf 840 combines parts catalogue manualofpsdjksemmds
The document contains parts lists and diagrams for Massey Ferguson MF 840/845 combines. It lists over 50 individual parts for the engine and related systems, including the cylinder block, crankshaft, cylinder head, rocker arm assembly, and other parts. Each part is given an item number, part number, quantity, description, and any relevant comments. Diagrams illustrate the layout and components of the engine and related systems.
Massey ferguson mf 825 combines parts catalogue manualofpsdjksemmds
The document contains parts lists and technical specifications for Massey Ferguson MF 820/825 combines. It includes detailed lists of parts for the engine, cylinder block, flywheel housing, flywheel and starter ring, crankshaft, pistons, connecting rods, and cylinder head. Each part is accompanied by descriptions and part numbers to facilitate repairs or replacements.
Massey ferguson mf 820 combines parts catalogue manualofpsdjksemmds
The document contains parts lists and technical specifications for Massey Ferguson MF 820/825 combines. It includes detailed lists of parts for the engine, cylinder block, flywheel housing, flywheel and starter ring, crankshaft, pistons, connecting rods, and cylinder head. Each part is accompanied by descriptions and part numbers to facilitate repairs or replacements.
Massey ferguson mf 805 combines parts catalogue manualofpsdjksemmds
The document provides parts information for Massey Ferguson MF 800/805 combines, including:
1. A table of contents listing engine and accessories parts.
2. Details on engine cylinder block parts including liners, plugs, and housing.
3. A diagram and parts list for the engine flywheel housing.
4. Information on the engine crankshaft, pistons, connecting rods, and cylinder head parts.
Massey ferguson mf 800 combines parts catalogue manualofpsdjksemmds
The document provides parts information for Massey Ferguson MF 800/805 combines, including:
1) An engine and accessories section listing 53 parts for the engine rod drain.
2) A cylinder block section listing 43 parts for the A6.354.4 engine block.
3) A cylinder head section listing 39 parts for the A6.354.4 engine cylinder head.
Massey ferguson mf 760 combine, 1746009412 (us) parts catalogue manualofpsdjksemmds
The document contains parts lists and technical specifications for Massey Ferguson MF 760 combine harvesters. It includes tables with lists of parts, part numbers, quantities and descriptions for various components. Reference information is provided to indicate applicability of parts based on serial numbers or engine numbers.
Massey ferguson mf 740 combine (fr) parts catalogue manualofpsdjksemmds
The document provides parts lists and descriptions for components of a Massey Ferguson 740 combine, including tables listing parts numbers, quantities, descriptions and comments. It covers items for various systems of the combine like the auger, knife, and wobble knife drive, listing individual parts for each system in table format across multiple pages.
Massey ferguson mf 665 combines parts catalogue manualofpsdjksemmds
The document provides a parts list and technical specifications for Massey Ferguson MF 660/665 combines. It includes over 50 pages detailing over 200 individual parts for the engine, cylinder block, crankshaft, cylinder head, and cylinder head cover. Each part is listed with its number, quantity, description, and any relevant comments.
Massey ferguson mf 660 combines parts catalogue manualofpsdjksemmds
The document provides a parts list and technical specifications for Massey Ferguson MF 660/665 combines. It includes over 50 pages detailing over 200 individual parts for the engine, cylinder block, crankshaft, cylinder head, and cylinder head cover. Each part is listed with its number, quantity, description, and any relevant comments.
Massey ferguson mf 25 combine (= 1997) parts catalogue manualofpsdjksemmds
This document provides a parts list for Massey Ferguson MF 22S/22/23/25/26 combines from 1997. It includes over 80 numbered items with corresponding part numbers, quantities, descriptions, and other notes. The parts list covers components of the straw divider, cutting table, and other sections of the combines for various models and widths.
Massey ferguson mf 25 combine ( 1996) parts catalogue manualofpsdjksemmds
This document provides a parts list for the cutting table and knife components of Massey Ferguson MF 22S/22/23/25/26 combines. It includes over 100 individual parts grouped by component (e.g. cutting table, knife) with part numbers, quantities, descriptions and other identifying information like width specifications. The parts list covers cutting tables for widths ranging from 2.7 to 4.8 meters and knife components for the different table widths.
Massey ferguson mf 23 combine (= 1997) parts catalogue manualofpsdjksemmds
This document provides a parts list for Massey Ferguson MF 22S/22/23/25/26 combines from 1997. It includes over 80 numbered items with corresponding part numbers, quantities, descriptions, and other details. The parts list is organized into sections on the straw divider, cutting table for various widths, and additional cutting table parts.
Massey ferguson mf 23 combine ( 1996) parts catalogue manualofpsdjksemmds
This document provides a parts list for the cutting table and knife components of Massey Ferguson MF 22S/22/23/25/26 combines. It includes over 100 individual parts grouped by component (e.g. cutting table, knife) with part numbers, quantities, descriptions and other identifying information like width or model applicability. The parts list contains assemblies, fasteners, bearings and other components for the crop cutting and collection system.
Massey ferguson mf 22 s combine (= 1997) parts catalogue manualofpsdjksemmds
This document provides a parts list for Massey Ferguson MF 22S/22/23/25/26 combines from 1997. It includes over 80 numbered items with corresponding part numbers, quantities, descriptions, and other details. The parts list is organized into sections on the straw divider, cutting table for various widths, and additional cutting table parts.
Massey ferguson mf 22 s combine ( 1996) parts catalogue manualofpsdjksemmds
This document provides a parts list for the cutting table and knife components of Massey Ferguson MF 22S/22/23/25/26 combines. It includes over 100 individual parts grouped by component (e.g. cutting table, knife) with part numbers, quantities, descriptions and other identifying information like width specifications. The parts list contains replacement and wear parts for the cutting and reaping mechanisms of the combines.
Massey ferguson mf 22 combine (= 1997) parts catalogue manualofpsdjksemmds
This document provides a parts list for Massey Ferguson MF 22S/22/23/25/26 combines from 1997. It includes over 80 numbered items with corresponding part numbers, quantities, descriptions, and other details. The parts list is organized into sections on the straw divider, cutting table for various widths, and additional cutting table parts.
Massey ferguson mf 22 combine ( 1996) parts catalogue manualofpsdjksemmds
This document provides a parts list for the cutting table and knife components of Massey Ferguson MF 22S/22/23/25/26 combines. It includes over 100 individual parts grouped by component (e.g. cutting table, knife) with part numbers, quantities, descriptions and other identifying information like width specifications. The parts list contains replacement and wear parts for the cutting and reaping mechanisms of the combines.
Massey ferguson gc1720 compact tractors parts catalogue manualofpsdjksemmds
This document provides a table of contents and part listings for engine, fuel, and exhaust systems of Massey Ferguson GC1705, GC1710, GC1715, and GC1720 compact tractors. It includes over 40 pages detailing over 200 individual parts across 11 systems, organized by page number and part number. The timing gear case page shows 43 individual timing gear case parts.
Massey ferguson gc1715 compact tractors parts catalogue manualofpsdjksemmds
This document provides a table of contents and part numbers for repairing Massey Ferguson GC1705, GC1710, GC1715, and GC1720 compact tractors. The table lists 11 systems for the tractors including the engine, fuel, exhaust, frame, steering, drive train, brakes, hydraulics, electrical, chassis, and implement lift systems. Each system section includes multiple pages that provide diagrams of components with their part numbers and descriptions.
Massey ferguson gc1710 compact tractors parts catalogue manualofpsdjksemmds
This document provides a table of contents and part numbers for repairing Massey Ferguson GC1705, GC1710, GC1715, and GC1720 compact tractors. The table lists 11 systems for the tractors including the engine and fuel system, frame and suspension, steering, drive train, brakes, hydraulics, and electrical. It then provides detailed parts lists and diagrams for components in the engine, fuel, and exhaust systems.
Massey ferguson gc1705 compact tractors parts catalogue manualofpsdjksemmds
This document provides a table of contents and part numbers for repairing Massey Ferguson GC1705, GC1710, GC1715, and GC1720 compact tractors. The table lists 11 systems for the tractors including the engine and fuel system, frame and suspension, steering, drive train, brakes, hydraulics, and electrical. It then provides detailed parts lists and diagrams for components in the engine, fuel, and exhaust systems.
Massey ferguson 1726 e economy compact tractor parts catalogue manualofpsdjksemmds
The document provides a table of contents and specifications for the engine, fuel, and exhaust system of a Massey Ferguson 1726E Economy Compact Tractor. It lists 24 pages detailing individual engine parts like the cylinder head, manifold, valves, pistons, crankshaft, and other components. The document contains part numbers, quantities, and short descriptions for each item.
Kobelco md120 lc hydraulic excavator service repair manualofpsdjksemmds
This document provides the service manual for the MD120LC Hydraulic Excavator. It was originally issued in April 1987, then revised in July 1987. It replaces two previous manuals and includes information on the applicable machines, revision history, and legal disclaimers.
This document is a repair manual for Jaguar 900-830 Profistar and Speedstar harvesters. It contains sections covering the operator's platform, cab, heating, air conditioning, driver's seat, operating elements, steering, brakes, and electrics systems. The manual provides instructions for removing, dismantling, assembling, and fitting various components of these systems. Safety information is also provided at the beginning, including important notes on general safety rules, pressure accumulators, and maintenance.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Massey ferguson mf 800 combines parts catalogue manualofpsdjksemmds
The document provides parts information for Massey Ferguson MF 800/805 combines, including:
1) An engine and accessories section listing 53 parts for the engine rod drain.
2) A cylinder block section listing 43 parts for the A6.354.4 engine block.
3) A cylinder head section listing 39 parts for the A6.354.4 engine cylinder head.
Massey ferguson mf 760 combine, 1746009412 (us) parts catalogue manualofpsdjksemmds
The document contains parts lists and technical specifications for Massey Ferguson MF 760 combine harvesters. It includes tables with lists of parts, part numbers, quantities and descriptions for various components. Reference information is provided to indicate applicability of parts based on serial numbers or engine numbers.
Massey ferguson mf 740 combine (fr) parts catalogue manualofpsdjksemmds
The document provides parts lists and descriptions for components of a Massey Ferguson 740 combine, including tables listing parts numbers, quantities, descriptions and comments. It covers items for various systems of the combine like the auger, knife, and wobble knife drive, listing individual parts for each system in table format across multiple pages.
Massey ferguson mf 665 combines parts catalogue manualofpsdjksemmds
The document provides a parts list and technical specifications for Massey Ferguson MF 660/665 combines. It includes over 50 pages detailing over 200 individual parts for the engine, cylinder block, crankshaft, cylinder head, and cylinder head cover. Each part is listed with its number, quantity, description, and any relevant comments.
Massey ferguson mf 660 combines parts catalogue manualofpsdjksemmds
The document provides a parts list and technical specifications for Massey Ferguson MF 660/665 combines. It includes over 50 pages detailing over 200 individual parts for the engine, cylinder block, crankshaft, cylinder head, and cylinder head cover. Each part is listed with its number, quantity, description, and any relevant comments.
Massey ferguson mf 25 combine (= 1997) parts catalogue manualofpsdjksemmds
This document provides a parts list for Massey Ferguson MF 22S/22/23/25/26 combines from 1997. It includes over 80 numbered items with corresponding part numbers, quantities, descriptions, and other notes. The parts list covers components of the straw divider, cutting table, and other sections of the combines for various models and widths.
Massey ferguson mf 25 combine ( 1996) parts catalogue manualofpsdjksemmds
This document provides a parts list for the cutting table and knife components of Massey Ferguson MF 22S/22/23/25/26 combines. It includes over 100 individual parts grouped by component (e.g. cutting table, knife) with part numbers, quantities, descriptions and other identifying information like width specifications. The parts list covers cutting tables for widths ranging from 2.7 to 4.8 meters and knife components for the different table widths.
Massey ferguson mf 23 combine (= 1997) parts catalogue manualofpsdjksemmds
This document provides a parts list for Massey Ferguson MF 22S/22/23/25/26 combines from 1997. It includes over 80 numbered items with corresponding part numbers, quantities, descriptions, and other details. The parts list is organized into sections on the straw divider, cutting table for various widths, and additional cutting table parts.
Massey ferguson mf 23 combine ( 1996) parts catalogue manualofpsdjksemmds
This document provides a parts list for the cutting table and knife components of Massey Ferguson MF 22S/22/23/25/26 combines. It includes over 100 individual parts grouped by component (e.g. cutting table, knife) with part numbers, quantities, descriptions and other identifying information like width or model applicability. The parts list contains assemblies, fasteners, bearings and other components for the crop cutting and collection system.
Massey ferguson mf 22 s combine (= 1997) parts catalogue manualofpsdjksemmds
This document provides a parts list for Massey Ferguson MF 22S/22/23/25/26 combines from 1997. It includes over 80 numbered items with corresponding part numbers, quantities, descriptions, and other details. The parts list is organized into sections on the straw divider, cutting table for various widths, and additional cutting table parts.
Massey ferguson mf 22 s combine ( 1996) parts catalogue manualofpsdjksemmds
This document provides a parts list for the cutting table and knife components of Massey Ferguson MF 22S/22/23/25/26 combines. It includes over 100 individual parts grouped by component (e.g. cutting table, knife) with part numbers, quantities, descriptions and other identifying information like width specifications. The parts list contains replacement and wear parts for the cutting and reaping mechanisms of the combines.
Massey ferguson mf 22 combine (= 1997) parts catalogue manualofpsdjksemmds
This document provides a parts list for Massey Ferguson MF 22S/22/23/25/26 combines from 1997. It includes over 80 numbered items with corresponding part numbers, quantities, descriptions, and other details. The parts list is organized into sections on the straw divider, cutting table for various widths, and additional cutting table parts.
Massey ferguson mf 22 combine ( 1996) parts catalogue manualofpsdjksemmds
This document provides a parts list for the cutting table and knife components of Massey Ferguson MF 22S/22/23/25/26 combines. It includes over 100 individual parts grouped by component (e.g. cutting table, knife) with part numbers, quantities, descriptions and other identifying information like width specifications. The parts list contains replacement and wear parts for the cutting and reaping mechanisms of the combines.
Massey ferguson gc1720 compact tractors parts catalogue manualofpsdjksemmds
This document provides a table of contents and part listings for engine, fuel, and exhaust systems of Massey Ferguson GC1705, GC1710, GC1715, and GC1720 compact tractors. It includes over 40 pages detailing over 200 individual parts across 11 systems, organized by page number and part number. The timing gear case page shows 43 individual timing gear case parts.
Massey ferguson gc1715 compact tractors parts catalogue manualofpsdjksemmds
This document provides a table of contents and part numbers for repairing Massey Ferguson GC1705, GC1710, GC1715, and GC1720 compact tractors. The table lists 11 systems for the tractors including the engine, fuel, exhaust, frame, steering, drive train, brakes, hydraulics, electrical, chassis, and implement lift systems. Each system section includes multiple pages that provide diagrams of components with their part numbers and descriptions.
Massey ferguson gc1710 compact tractors parts catalogue manualofpsdjksemmds
This document provides a table of contents and part numbers for repairing Massey Ferguson GC1705, GC1710, GC1715, and GC1720 compact tractors. The table lists 11 systems for the tractors including the engine and fuel system, frame and suspension, steering, drive train, brakes, hydraulics, and electrical. It then provides detailed parts lists and diagrams for components in the engine, fuel, and exhaust systems.
Massey ferguson gc1705 compact tractors parts catalogue manualofpsdjksemmds
This document provides a table of contents and part numbers for repairing Massey Ferguson GC1705, GC1710, GC1715, and GC1720 compact tractors. The table lists 11 systems for the tractors including the engine and fuel system, frame and suspension, steering, drive train, brakes, hydraulics, and electrical. It then provides detailed parts lists and diagrams for components in the engine, fuel, and exhaust systems.
Massey ferguson 1726 e economy compact tractor parts catalogue manualofpsdjksemmds
The document provides a table of contents and specifications for the engine, fuel, and exhaust system of a Massey Ferguson 1726E Economy Compact Tractor. It lists 24 pages detailing individual engine parts like the cylinder head, manifold, valves, pistons, crankshaft, and other components. The document contains part numbers, quantities, and short descriptions for each item.
Kobelco md120 lc hydraulic excavator service repair manualofpsdjksemmds
This document provides the service manual for the MD120LC Hydraulic Excavator. It was originally issued in April 1987, then revised in July 1987. It replaces two previous manuals and includes information on the applicable machines, revision history, and legal disclaimers.
This document is a repair manual for Jaguar 900-830 Profistar and Speedstar harvesters. It contains sections covering the operator's platform, cab, heating, air conditioning, driver's seat, operating elements, steering, brakes, and electrics systems. The manual provides instructions for removing, dismantling, assembling, and fitting various components of these systems. Safety information is also provided at the beginning, including important notes on general safety rules, pressure accumulators, and maintenance.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. Page No.Contents
Section 1 - General Information
1-1 1-1
Applications
Introduction ............................................................................................. 1-1-1
Tables ..................................................................................................... 1-1-2
Use
Introduction ............................................................................................. 1-2-1
Scope ..................................................................................................... 1-2-2
Format .................................................................................................... 1-2-3
Left and Right Sides ............................................................................... 1-2-4
Hydraulic Schematic Codes ................................................................... 1-2-5
Machine Identification
Introduction ............................................................................................. 1-3-1
Related Topics ........................................................................................ 1-3-2
Machine Identification Plate .................................................................... 1-3-3
Component Identification Plates ............................................................. 1-3-7
Torque Settings
Introduction ............................................................................................. 1-4-1
Zinc Plated Fasteners and Dacromet Fasteners .................................... 1-4-2
Hydraulic Connections ............................................................................ 1-4-6
`Positional Type' Hydraulic Adaptors .................................................... 1-4-10
Service Tools
Introduction ............................................................................................. 1-5-1
Numerical List ......................................................................................... 1-5-2
Tool Detail Reference ............................................................................. 1-5-5
Rivet Nuts ............................................................................................. 1-5-27
Slide Hammer Kit .................................................................................. 1-5-29
Service Consumables
Introduction ............................................................................................. 1-6-1
Sealing and Retaining Compounds ........................................................ 1-6-2
Fuel
Introduction ............................................................................................. 1-7-1
Related Topics ........................................................................................ 1-7-2
Acceptable and Unacceptable Fuels ...................................................... 1-7-3
Stall Speed Combinations
Introduction ............................................................................................. 1-8-1
Related Topics ........................................................................................ 1-8-2
Specifications ......................................................................................... 1-8-3
3. Section 1-1 - General Information
Applications
Introduction
1-1-1 1-1-19813/1500-03 (1-14-07)
Applications
Introduction
This manual contains topics that relate to JCB Loadall machines in the 5A and 5T groups. There are several machine
model codes in the family.
Machine Group Model Code Model Name Serial Number range
5A A 531-70 TBA
5A B 535-95 TBA
5A C 536-60 TBA
5A D 541-70 TBA
5A H 533-105 TBA
5A R 536-70 TBA
5A S 526-56 TBA
5A W 550-80 TBA
5T A 531-T70 TBA
5T B 541-T70 TBA
5T C 536-T60 TBA
5T D 535-T95 TBA
5T E 536-T70 TBA
5T W 550-T80 TBA
Machine variants: There are different machine variants within the same model name. This happens because of market
requirements, or when the machine specification changes after a period of time. Where applicable information is given to
help identify which machine variant is applicable for the given specifications and procedures.
Use the applications tables to see which topics relate to which machine models and variants. Where no variant information
is given the topic is applicable to all machine models indicated on the table.
Important: The machine model names are NOT referred to in the topics. You must refer to the applications tables for the
applicable machine model. Table entries shaded grey indicate a topic not included in this issue of the manual.
Note: For full details of machine identification refer to Section 1 - Machine Identification.
K Tables ( T 1-1-2)
K Section 1 - General Information ( T 1-1-2)
K Section 2 - Care and Safety ( T 1-1-2)
K Section 3 - Routine Maintenance ( T 1-1-3)
K Section B - Body and Framework ( T 1-1-4)
K Section C - Electrics ( T 1-1-6)
K Section E - Hydraulics ( T 1-1-7)
K Section F - Transmission ( T 1-1-10)
K Section G - Brakes ( T 1-1-12)
K Section H - Steering ( T 1-1-13)
K Section K - Engine ( T 1-1-14)
K Section M - Electronic Data Systems ( T 1-1-15)
4. Section 1-2 - General Information
1-2-1 1-2-11-01-03 Issue 01
Use
Introduction
This topic contains information about the structure of the manual and how to use the manual.
K Scope ( T 1-2-2)
K Personnel ( T 1-2-2)
K Applications ( T 1-2-2)
K Newest Data ( T 1-2-2)
K Format ( T 1-2-3)
K Left and Right Sides ( T 1-2-4)
K Hydraulic Schematic Codes ( T 1-2-5)
K Colour Codes ( T 1-2-5)
5. Section 1-2 - General Information
Use
Scope
1-2-2 1-2-21-01-03 Issue 01
Scope
Personnel
This publication is designed for the benefit of JCB
Distributor Service Engineers who are receiving, or have
received, training by JCB Technical Training Department.
These personnel should have a sound knowledge of
workshop practice, safety procedures, and general
techniques associated with the maintenance and repair of
hydraulic earthmoving equipment. Finally, please
remember above all else SAFETY MUST COME FIRST!
Applications
This manual contains data relevant to a range of
machines. Make sure you reference the data for the
correct machine. Refer to the Applications topic in this
section.
Newest Data
From time to time new machines, systems or devices
require the manual to be re-issued. Make sure you have
the newest issue.
Always check the on-line JCB data system for relevant
technical information.
6. Section 1-2 - General Information
Use
Format
1-2-3 1-2-31-01-03 Issue 01
Format
The manual is compiled in sections, the first three are
numbered and contain information as follows:
1 General Information - Use the Applications Tables
at the front of the section to see which topic in the
manual is applicable to which machine model. The
section also includes general information such as
torque settings and service tools.
2 Care & Safety - includes warnings, cautions and
general procedures related to aspects of workshop
procedures contained in the manual.
3 Routine Maintenance - includes service schedules
and recommended lubricants for all the machine.
The remaining sections are alphabetically coded and deal
with dismantling, overhaul etc. of specific components, for
example:
The sections contain topics. Each topic is a self contained
set of data about a machine SYSTEM or Device.
Some topics are only applicable to some machine models.
Use the Applications Tables in this section to see which
topic is applicable to which machine model.
Each topic contains data such as specifications,
descriptions, fault finding and test procedures. Device
topics also contain removal, replacement, dismantle and
assemble procedures.
Some topics contain procedures and specifications for
different variants. This happens because of market
requirements, or when the machine specification changes
after a period of time. Where applicable, a table in the
introduction of each topic contains information to help you
identify the correct specifications or procedures.
Each topic also contains a Related Topics table. This
table lists all the topics that contain related data. For
example a hydraulic SYSTEM contains devices such as
valves and pumps. These devices have their own topics
and they are listed in the SYSTEM related topics table.
A Attachments
B Body and Framework...etc.
7. Section 1-2 - General Information
Use
Left and Right Sides
1-2-4 1-2-41-01-03 Issue 01
Left and Right Sides
'Left Hand' and 'Right Hand' are as viewed from the rear of
the machine facing forwards.
8. Section 1-2 - General Information
Use
Hydraulic Schematic Codes
1-2-5 1-2-51-01-03 Issue 01
Hydraulic Schematic Codes
Colour Codes
The following colour coding, used on illustrations to denote
various conditions of oil pressure and flow, is standardised
throughout JCB Service Publications.
Red
Full Pressure: Pressure generated from operation of a service. Depending on application this
may be anything between neutral circuit pressure and LSRV operating pressure.
Pink Pressure: Pressure that is above neutral circuit pressure but lower than that denoted by Red.
Orange Pilot: Oil pressure used in controlling a device (Pilot).
Blue Neural: Neutral circuit pressure.
Green Exhaust:
Light Green Cavitation: Oil subjected to a partial vacuum due to a drop in pressure (cavitation).
Yellow Lock Up: Oil trapped within a chamber or line, preventing movement of components (lock up).
9. Section 1-3 - General Information
Machine Identification
Component Identification Plates
1-3-7 1-3-71-02-07 Issue 02
Component Identification Plates
Typical Engine Identification Number
Engine data labels A are located on the cylinder block at
position C and rocker cover D (if fitted). The data label
contains important engine information and includes the
engine identification number E.
A typical engine identification number is explained as
follows:
1 Engine Type
SD = turbocharged
SE = electronic common rail fuel injection,
turbocharged and intercooled.
SF = turbocharged and intercooled.
SH = 4.4 litre electronic common rail fuel injection
with Variable Geometry Turbocharger (81kW, 93kW)
SL = 4.4 litre electronic common rail fuel injection with
Fixed Geometry Turbocharger (55kW)
DH = 4.8 litre electronic common rail fuel injection
with Variable Geometry Turbocharger (108kW)
2 Engine part number
3 Country of manufacture
U = United Kingdom
4 Engine Serial Number
5 Year of Manufacture
The last three parts of the engine identification number are
stamped on the cylinder block at position B.
C007280-C5.jpg
Fig 3. Engine
SD 320/40001 U 00001 04
1 2 3 4 5
U 00001 04
10. Section 1-3 - General Information
Machine Identification
Component Identification Plates
1-3-8 1-3-81-02-07 Issue 02
Transmission Identification Numbers
Axles (Excluding 550-80 Machines)
The transmission components have a serial number
stamped on a data plate A as shown.
A710840-C1
Fig 4. Front Axle
A710830-C1
Fig 5. Rear Axle
Axles (550-80 Machines)
The axles have a serial number stamped on a data plate
label A as shown.
To view to the front axle data plate remove the cover B and
the plate will be visible through hole C.
C107510
Fig 6. Front Axle
C107520
Fig 7. Rear Axle
C
B
A
A
11. Section 1-3 - General Information
Machine Identification
Component Identification Plates
1-3-9 1-3-91-02-07 Issue 02
Gearbox
The transmission components have a serial number
stamped on a data plate A as shown.
263370-C1
Fig 8. PS750 Powershift Transmission
A401030-C2
Fig 9. PS760 Powershift Transmission
C007640
Fig 10. SS700 Transmission
12. Section 1-3 - General Information
Machine Identification
Component Identification Plates
1-3-10 1-3-101-02-07 Issue 02
HydroStatic Transmission Components
Transmission Pump
C094930
Fig 11.
1 Ordering Code
2 Pump Serial Number (8 Digits)
Each motor has a unique serial number.
3 Direction of rotation - looking at the shaft.
4 Date of manufacture.
5 Speed.
6 Power.
Transmission Motor
1 Motor Serial Number (6 Digits)
Each motor has a unique serial number.
2 Type
3 Date of manufacture.
C094920
Fig 12.
Code Machine
AA4VG56 20 and 34 kph
AA10VG63 25 kph
AA4VG71 40 kph
13. Section 1-3 - General Information
Machine Identification
Component Identification Plates
1-3-11 1-3-111-02-07 Issue 02
ROPS/FOPS and OECD Certification
Plates
Machines built to ROPS/FOPS standards have an
identification label A fitted to the inside of the cab.
Machines built to ROPS/FOPS and OECD standards have
identification label B fitted to the inside of the cab.
T016800-3-C1
Fig 13. 526-56 and 527-58 machines
Definition of terms:
ROPS Roll Over Protection Structure
FOPS Falling Objects Protection Structure
OECD Organisation for Economic Co-operation and
Development.
14. Section 1-3 - General Information
Machine Identification
Component Identification Plates
1-3-12 1-3-121-02-07 Issue 02
445911-5
Fig 14. Other Machines
15. Section 1-4 - General Information
1-4-1 1-4-11-05-01 Issue 01
Torque Settings
Introduction
This topic contains information about torques. Torque values are given for types and sizes of bolts and hydraulic
connectors and adaptors.
Where a torque is given as a single figure it may be varied by plus or minus 3%. Torque figures are given for fasteners
with different surface treatments. Make sure you use the correct torque figures.
Where torques are given in topics within the other sections always use these values.
K Zinc Plated Fasteners and Dacromet Fasteners ( T 1-4-2)
K Introduction ( T 1-4-2)
K Bolts and Screws ( T 1-4-2)
K Hydraulic Connections ( T 1-4-6)
K 'O' Ring Face Seal System ( T 1-4-6)
K 'Torque Stop' Hose System ( T 1-4-9)
K `Positional Type' Hydraulic Adaptors ( T 1-4-10)
K Fitting Procedure ( T 1-4-10)
16. Section 1-4 - General Information
Torque Settings
Zinc Plated Fasteners and Dacromet Fasteners
1-4-2 1-4-21-05-01 Issue 01
Zinc Plated Fasteners and Dacromet Fasteners
T11-002
Introduction
Some external fasteners on JCB machines are
manufactured using an improved type of corrosion
resistant finish. This type of finish is called Dacromet and
replaces the original Zinc and Yellow Plating used on
earlier machines.
The two types of fasteners can be readily identified by
colour and part number suffix. K Table 1. Fastener Types
( T 1-4-2).
Table 1. Fastener Types
Note: As the Dacromet fasteners have a lower torque
setting than the Zinc and Yellow fasteners, the torque
figures used must be relevant to the type of fastener.
Note: A Dacromet bolt should not be used in conjunction
with a Zinc or Yellow plated nut, as this could change the
torque characteristics of the torque setting further. For the
same reason, a Dacromet nut should not be used with a
Zinc or Yellow plated bolt.
Note: All bolts used on JCB machines are high tensile and
must not be replaced by bolts of a lesser tensile
specification.
Note: Dacromet bolts, due to their high corrosion
resistance are used in areas where rust could occur.
Dacromet bolts are only used for external applications.
They are not used in applications such as gearbox or
engine joint seams or internal applications.
Bolts and Screws
Use the following torque setting tables only where no
torque setting is specified in the text.
Note: Dacromet fasteners are lubricated as part of the
plating process, do not lubricate.
Torque settings are given for the following conditions:
Condition 1
– Un-lubricated fasteners
– Zinc fasteners
– Yellow plated fasteners
Condition 2
– Zinc flake (Dacromet) fasteners
– Lubricated zinc and yellow plated fasteners
– Where there is a natural lubrication. For example,
cast iron components
Verbus Ripp Bolts
Fig 1.
Torque settings for these bolts are determined by the
application. Refer to the relevant procedure for the
required settings.
Fastener
Type
Colour Part No. Suffix
Zinc and
Yellow
Golden finish 'Z' (e.g. 1315/3712Z)
Dacromet Mottled silver finish 'D' (e.g. 1315/3712D)
23. Section 1-4 - General Information
Torque Settings
Hydraulic Connections
1-4-9 1-4-91-05-01 Issue 01
'Torque Stop' Hose System
Fig 3.
`Torque Stop' Hoses 3-B screwed into adaptors 3-A seal
onto an 'O' ring 3-C which is compressed into a 45° seat
machined in the face of the adaptor port. To prevent the 'O'
ring being damages as a result of over tightening, 'Torque
Stop' Hoses have an additional shoulder 3-D, which acts
as a physical stop.
Note: Minimum dimension 3-E fixed by shoulder 3-D.
Table 12. BSP `Torque Stop' Hose - Torque Settings
BSP Hose Size Hexagon (A/F)
Nm kgf m lbf ftin. mm
1/8 14.0 14.0 1.4 10.0
1/4 19.0 27.0 2.7 20.0
3/8 22.0 40.0 4.1 30.0
1/2 27.0 55.0 5.6 40.0
5/8 30.0 65.0 6.6 48.0
3/4 32.0 95.0 9.7 70.0
1 38.0 120.0 12.2 89.0
1 1/4 50.0 189.0 19.3 140.0
1 1/2 55.0 244.0 24.9 180.0
24. Section 1-4 - General Information
Torque Settings
`Positional Type' Hydraulic Adaptors
1-4-10 1-4-101-05-01 Issue 01
`Positional Type' Hydraulic Adaptors
Fitting Procedure
On a typical machine, some hydraulic components may
utilise `Positional Type' SAE Hydraulic Adaptors. When
fitting `Positional Type' Hydraulic Adaptors it is important to
adopt the following procedure. If this procedure is not
followed correctly, damage to the `O' ring seal 4-A can
occur resulting in oil leaks.
1 Ensure the locknut 4-B is screwed back onto the body
of the adaptor as far as possible as shown.
2 Check the `O' ring backing washer 4-C is a tight fit on
the adaptor. Note that the washer should not move
freely, if the washer is slack do not use the adaptor.
3 Check the `O' ring 4-A is fitted and that it is free from
damage or nicks. Before fitting the adaptor, smear the
`O' ring with clean hydraulic fluid.
Note: The dimensions and shore hardness of the `O' ring
is critical. Should it become necessary to replace the `O'
ring, ensure that only JCB Genuine Parts are used.
4 Screw the adaptor into the port of the hydraulic
component as far as possible, so that ALL the threads
engage and the `O' ring is correctly seated against
the sealing face.
5 Set the angular position of the adaptor as required,
then secure by tightening the locknut 4-B.
Note: When fitted correctly no more than one thread
should be visible at 5-Z as shown.
6 Torque tighten the locknut to 81 Nm (60 lbf ft).
Fig 4.
Fig 5.
26. Page No.Contents
Section 2 - Care and Safety
2-1 2-1
Safety Notices
Introduction ............................................................................................. 2-1-1
Important Information ............................................................................. 2-1-2
Safety Check List .................................................................................... 2-1-3
Safety Decals ....................................................................................... 2-1-16
General Procedures
Introduction ............................................................................................. 2-2-1
Related Topics ........................................................................................ 2-2-3
Parking the Machine and Making it Safe ................................................ 2-2-4
Boom Safety Strut (P1) ........................................................................... 2-2-6
Boom Safety Strut (P2) ........................................................................... 2-2-9
Venting the Hydraulic Pressure ............................................................ 2-2-12
Venting the Brake System Pressure ..................................................... 2-2-14
Connecting/Disconnecting Hydraulic Hoses ......................................... 2-2-15
Quick Release Couplings ..................................................................... 2-2-16
Hydraulic Contamination ...................................................................... 2-2-18
Battery Disconnection/Connection ....................................................... 2-2-20
Battery Charging System Precautions .................................................. 2-2-21
Removing and Replacing Components ................................................ 2-2-22
Hydraulic Rams .................................................................................... 2-2-24
Gas Hydraulic Bladder Accumulators ................................................... 2-2-26
27. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
28. Section 2-1 - Care and Safety
2-1-1 2-1-12-01-06 Issue 01
Safety Notices
Introduction
In this publication and on the machine, there are safety
notices. Each notice starts with a signal word. The signal
word meanings are given below.
!MDANGER
Denotes an extreme hazard exists. If proper
precautions are not taken, it is highly probable that the
operator (or others) could be killed or seriously
injured.
INT-1-2-1
!MWARNING
Denotes a hazard exists. If proper precautions are not
taken, the operator (or others) could be killed or
seriously injured.
INT-1-2-2
!MCAUTION
Denotes a reminder of safety practices. Failure to
follow these safety practices could result in injury to
the operator (or others) and possible damage to the
machine.
INT-1-2-3
29. Section 2-1 - Care and Safety
Safety Notices
Important Information
2-1-2 2-1-22-01-06 Issue 01
Important Information
T1-042
The Operator Manual
!MWARNING
You and others can be killed or seriously injured if you
operate or maintain the machine without first studying
the Operator Manual. You must understand and follow
the instructions in the Operator Manual. If you do not
understand anything, ask your employer or JCB
dealer to explain it.
INT-1-4-2
Do not operate the machine without an Operator Manual,
or if there is anything on the machine you do not
understand.
Treat the Operator Manual as part of the machine. Keep it
clean and in good condition. Replace the Operator Manual
immediately if it is lost, damaged or becomes unreadable.
Safety Warnings
In this publication and on the machine, there are safety
notices. Each notice starts with a signal word. The signal
word meanings are given below.
!MDANGER
Denotes an extreme hazard exists. If proper
precautions are not taken, it is highly probable that the
operator (or others) could be killed or seriously
injured.
INT-1-2-1
!MWARNING
Denotes a hazard exists. If proper precautions are not
taken, the operator (or others) could be killed or
seriously injured.
INT-1-2-2
!MCAUTION
Denotes a reminder of safety practices. Failure to
follow these safety practices could result in injury to
the operator (or others) and possible damage to the
machine.
INT-1-2-3
This safety alert system identifies
important safety messages in this
manual. When you see this symbol, be
alert, your safety is involved, carefully
read the message that follows, and inform
other operators.
30. Section 2-1 - Care and Safety
Safety Notices
Safety Check List
2-1-3 2-1-32-01-06 Issue 01
Safety Check List
Safety - Yours and Others
INT-1-3-1_3
All machinary can be hazardous. When a machine is
correctly operated and properly maintained, it is a safe
machine to work with. But when it is carelessly operated or
poorly maintained it can become a danger to you (the
operator) and others.
In this manual and on the machine you will find warning
messages. Read and understand them. They tell you of
potential hazards and how to avoid them. If you do not fully
understand the warning messages, ask your employer or
JCB distributor to explain them.
But safety is not just a matter of responding to the
warnings. All the time you are working on or with the
machine you must be thinking what hazards there might be
and how to avoid them.
Do not work with the machine until you are sure that you
can control it.
Do not start any job until you are sure that you and those
around you will be safe.
If you are unsure of anything, about the machine or the job,
ask someone who knows. Do not assume anything.
Remember
BE CAREFUL
BE ALERT
BE SAFE
Common Rail (SE/SH/DH/SL Engine)
Specific
In addition to the general safety notices and general good
workshop practices issued in this section and throughout
the manual, there are specific points to note when
completing maintenance on engine equipment:
Diesel Fuel Quality
Important: The potential for engine damage due to the
use of incorrect or contaminated fuel is much greater with
common rail injection technology than with mechanical
injection systems.
For more information about cleanliness requirements and
fuel types refer to Section 1 - General Information.
!MCAUTION
Do not allow dirt to enter the fuel system. Before
disconnecting any part of the fuel system, thoroughly
clean around the connection. When a component has
been disconnected, for example a fuel pipe, always fit
protective caps and plugs to prevent dirt ingress.
Failure to follow these instruction will lead to dirt
entering the fuel system. Dirt in the fuel system will
seriously damage the fuel injection equipment and
could be expensive to repair.
ENG-1-7