This service manual section provides information on servicing the crankshaft and related components on a backhoe loader. It includes identification of parts, technical specifications, operation descriptions, removal and installation instructions, and check/inspection procedures. Proper cleaning and installation of the crankshaft oil seal is critical to prevent oil leakage. Removal and installation of the crankshaft requires carefully following all steps while ensuring components remain clean and undamaged.
Mc cormick g max iveco tier 3 (2007-2012) - rp74 - 180 service repair manualfusefjskekkmem
This document provides a list of parts for an IVECO G-MAX Tier 3 diesel engine model RP74 with a reference to engine serial numbers or engine numbers up to N170292. It includes over 100 individual part numbers with descriptions for components such as pistons, rods, bearings, gaskets, plugs, screws, filters, pumps, valves, heads, crankcases, gears, shafts, and more. Each part is accompanied by an image, part number, description, quantity and reference number to other parts or pages for additional information.
Mc cormick g max iveco tier 3 (2007-2012) - rp74 - 145 tractor service repair...fusefjskekkmem
This document provides a parts list and exploded diagrams for an engine. It lists over 100 individual engine parts, including pistons, rods, valves, plugs, filters, screws, nuts and other components. Each part is given a reference number and specifications. The diagrams show the parts and their positions in the engine. Additional information provided includes markets the parts are intended for and alternative or replacement parts.
Mc cormick g max (2008- ) - rp72 - 130 tractor service repair manualfusefjskekkmem
This document contains parts lists and technical specifications for engine components of a McCormick G-Max tractor from 2008. It includes lists of pistons, liners, valves, pumps, gears, seals, plugs, and other parts, along with reference numbers, replacement part numbers, specifications like tolerances, and installation/service notes. Quantities, related part numbers, and applications are provided for many components.
Mc cormick g max (2008- ) - rp72 - 115 tractor service repair manualfusefjskekkmem
This document contains parts lists and technical specifications for engine components of a G-Max tractor model from 2008. It includes lists of cylinders, pistons, rods, pumps, valves and other engine parts along with identification numbers, quantities and other details. Replacement parts, repair procedures and component assembly/location information is also provided.
Mc cormick gm tier 3 (2009 ) - rs12 - 55 tractor service repair manualfusefjskekkmem
This document contains parts lists and technical specifications for components of an engine and associated systems. It includes images and part numbers for items like blocks, gaskets, bolts, shafts, pistons, filters and more. Accompanying text provides additional details on dimensions, replacement status, assembly status and quantity breakdowns for tractors sold.
Mc cormick gm tier 3 (2009 ) - rs12 - 50 tractor service repair manualfusefjskekkmem
This document provides a list of parts for engine replacement in a GM tier 3 tractor from 2009. It includes over 100 individual part numbers with descriptions like piston, plug, bearing, shaft, and gasket. The parts are grouped with reference numbers and indicated as components of larger assemblies. Additional information specifies quantities, sizes, and application details for some of the parts.
Mc cormick gm tier 3 (2009 ) - rs12 - 45 tractor service repair manualfusefjskekkmem
This document contains parts listings and component information for engine replacement and overhaul for a GM tier 3 tractor model from 2009. It includes over 100 individual part numbers with descriptions like cylinder head, piston, valves, gears, bolts, seals, and other engine parts. Each part is identified by a reference number, quantity, and size or model number. Notes provide information on replacement components, part markings, and references to other pages or manuals.
Mc cormick gm tier 3 (2009 ) - rs12 - 40 tractor service repair manualfusefjskekkmem
This document contains parts listings and diagrams for components of an engine and tractor assembly. It includes identification numbers, part names, quantities and other technical specifications for over 100 individual parts. Replacement instructions, part designations and quantity estimates for different production levels are also provided.
Mc cormick g max iveco tier 3 (2007-2012) - rp74 - 180 service repair manualfusefjskekkmem
This document provides a list of parts for an IVECO G-MAX Tier 3 diesel engine model RP74 with a reference to engine serial numbers or engine numbers up to N170292. It includes over 100 individual part numbers with descriptions for components such as pistons, rods, bearings, gaskets, plugs, screws, filters, pumps, valves, heads, crankcases, gears, shafts, and more. Each part is accompanied by an image, part number, description, quantity and reference number to other parts or pages for additional information.
Mc cormick g max iveco tier 3 (2007-2012) - rp74 - 145 tractor service repair...fusefjskekkmem
This document provides a parts list and exploded diagrams for an engine. It lists over 100 individual engine parts, including pistons, rods, valves, plugs, filters, screws, nuts and other components. Each part is given a reference number and specifications. The diagrams show the parts and their positions in the engine. Additional information provided includes markets the parts are intended for and alternative or replacement parts.
Mc cormick g max (2008- ) - rp72 - 130 tractor service repair manualfusefjskekkmem
This document contains parts lists and technical specifications for engine components of a McCormick G-Max tractor from 2008. It includes lists of pistons, liners, valves, pumps, gears, seals, plugs, and other parts, along with reference numbers, replacement part numbers, specifications like tolerances, and installation/service notes. Quantities, related part numbers, and applications are provided for many components.
Mc cormick g max (2008- ) - rp72 - 115 tractor service repair manualfusefjskekkmem
This document contains parts lists and technical specifications for engine components of a G-Max tractor model from 2008. It includes lists of cylinders, pistons, rods, pumps, valves and other engine parts along with identification numbers, quantities and other details. Replacement parts, repair procedures and component assembly/location information is also provided.
Mc cormick gm tier 3 (2009 ) - rs12 - 55 tractor service repair manualfusefjskekkmem
This document contains parts lists and technical specifications for components of an engine and associated systems. It includes images and part numbers for items like blocks, gaskets, bolts, shafts, pistons, filters and more. Accompanying text provides additional details on dimensions, replacement status, assembly status and quantity breakdowns for tractors sold.
Mc cormick gm tier 3 (2009 ) - rs12 - 50 tractor service repair manualfusefjskekkmem
This document provides a list of parts for engine replacement in a GM tier 3 tractor from 2009. It includes over 100 individual part numbers with descriptions like piston, plug, bearing, shaft, and gasket. The parts are grouped with reference numbers and indicated as components of larger assemblies. Additional information specifies quantities, sizes, and application details for some of the parts.
Mc cormick gm tier 3 (2009 ) - rs12 - 45 tractor service repair manualfusefjskekkmem
This document contains parts listings and component information for engine replacement and overhaul for a GM tier 3 tractor model from 2009. It includes over 100 individual part numbers with descriptions like cylinder head, piston, valves, gears, bolts, seals, and other engine parts. Each part is identified by a reference number, quantity, and size or model number. Notes provide information on replacement components, part markings, and references to other pages or manuals.
Mc cormick gm tier 3 (2009 ) - rs12 - 40 tractor service repair manualfusefjskekkmem
This document contains parts listings and diagrams for components of an engine and tractor assembly. It includes identification numbers, part names, quantities and other technical specifications for over 100 individual parts. Replacement instructions, part designations and quantity estimates for different production levels are also provided.
Mc cormick gm series tier 2 (2003 2008) - rs11 - gm55 tractor service repair ...fusefjskekkmem
This document contains parts listings and technical specifications for components of an engine and related systems. It includes identification numbers, part names, quantities, and other details. Replacement parts are identified as well as overhaul parts. Sizes, material types and other variations are specified. The document provides an assembly-level breakdown of all individual parts.
Mc cormick gm series tier 2 (2003 2008) - rs11 - gm50 tractor service repair ...fusefjskekkmem
This document contains a list of component parts for engines and transmissions. It includes the part names and numbers, quantities needed, and notes on replacements and applications. Key information includes part designations for oversized/undersized parts and assemblies, reference numbers for related pages, and specifications for tractors from 2003-2008.
Mc cormick gm series tier 2 (2003 2008) - rs11 - gm40 tractor service repair ...fusefjskekkmem
This document contains parts listings and diagrams for engine components. It includes references for replacement parts, quantities needed, and size variations. Application and installation instructions should be referenced in the workshop manual.
Massey ferguson mf8130 tractor parts catalogue manualfusefjskekkmem
This document provides a list of parts for repairing or replacing components of a Massey Ferguson 8130 tractor engine. It includes detailed part numbers and descriptions for the cylinder block, crankshaft, pistons, connecting rods, cylinder head, rocker shaft, and turbocharger. Next to each part listing is additional information on interchangeability, quantity, and any comments about the part.
Massey ferguson mf8120 tractor parts catalogue manualfusefjskekkmem
This document provides parts information for the cylinder head of a Massey Ferguson 8120 tractor. It contains a parts list with 51 numbered items, including the cylinder head assembly, valves, guides, seals, springs, and fasteners. The list provides part numbers, quantities, descriptions, and notes on replacements and repairs. It is for a tractor with an engine serial number up to F044008.
Massey ferguson mf7724 mf7724 s tractor (dyna vt) (f092038 9999999) or (m77...fusefjskekkmem
This document provides a parts list and technical specifications for a Massey Ferguson 7724/7724S tractor. It includes 18 pages detailing over 200 individual parts for the engine, fuel system, axles, steering, brakes, hydraulics, electrical system, chassis, and other components. The parts are organized by system and include part numbers, quantities, descriptions, and reference images showing the component locations.
Kubota b2410 hsdb tractor parts catalogue manualfusefjskekkmem
This document provides instructions and part numbers for a parts book. It explains the column headings used on part number pages including the reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also provides notes about country codes that may be included to indicate part differences between countries.
Kubota b2410 hsd tractor parts catalogue manualfusefjskekkmem
This parts book page provides information on crankcase parts for a diesel engine. It lists 20 parts associated with the crankcase including the composite crankcase, caps, plugs, pins, bushes, bolts, gaskets and o-rings. Specifications are provided such as part numbers, descriptions, quantities used, applicable serial number ranges, interchangeability codes, and weights.
Kubota b2400 hse tractor parts catalogue manualfusefjskekkmem
The document provides instructions and definitions for parts books. It lists part numbers, descriptions, quantities, serial number ranges and other information for each part. Country codes are explained, noting some parts may be different in other countries. An index of parts is then listed for a B2400HSE machine, including the engine, fuel system, cooling, electrical and other systems.
Komatsu wa200 pz 6 wheel loader service repair manual sn70136 and upfusefjskekkmem
This document provides information about Komatsu wheel loaders, including:
- The shop manual covers models WA200-6 and WA200PZ-6.
- Sections include specifications, maintenance procedures, testing and adjustments, troubleshooting, and electrical systems.
- Technical details are provided for the engine, power train, steering, brakes, hydraulics, work equipment and electrical systems.
- Troubleshooting tables list potential issues, causes and remedies.
Komatsu wa200 pz 6 wheel loader service repair manual (sn 70001 and up)fusefjskekkmem
This document is a table of contents for a shop manual covering a WA200-6 and WA200PZ-6 wheel loader. The table of contents lists 10 sections covering specifications, structure and maintenance standards for the engine/cooling system, power train, steering system, brake system, undercarriage/frame, and hydraulic system. It provides an overview and outlines of the technical information and components that will be described in detail within the full shop manual.
Mc cormick t series tier 2 (2003 2007) - cp01 - t 85 f-m-t tractor service re...fusefjskekkmem
This document contains technical information for replacement parts for various engine components for McCormick T Series Tier 2 tractors from 2003-2007, including lists of parts, part numbers, engine numbers ranges that parts are applicable to, and other specifications. The parts are grouped by component and include details like quantity, reference numbers, and labeling for kit vs individual part.
Mc cormick t series compact (2001 2009) - ct00 - t60f tractor service repair ...fusefjskekkmem
This document contains parts lists and repair instructions for engine components for McCormick T Series Compact tractors from 2001-2009. It provides images and part numbers for cylinders, valves, plugs, seals, gaskets, and other engine parts. Reference numbers allow tracing components to their location in assemblies. Quantities of parts needed are specified for different production volumes. Overviews of repair and replacement procedures are also included.
Mc cormick mtx series (2002 2007) - mtx3 - mtx200 tractor service repair manualfusefjskekkmem
This document provides parts information for various engine and drivetrain components for McCormick MTX tractors from 2002-2007, including engine assemblies, radiators, cooling system parts, hydraulic pumps and motors, air conditioning components, clutches, and more. It lists part numbers, descriptions, and images for each component.
Mc cormick mtx series (2002 2007) - mtx3 - mtx185 tractor service repair manualfusefjskekkmem
This document provides parts information for various engine and drivetrain components for McCormick MTX tractors from 2002-2007, including engine assemblies, radiators, cooling system parts, hydraulic pumps and motors, air conditioning components, clutches, and more. It lists part numbers, descriptions, and images for each component.
Mc cormick mtx series (2002 2007) - mtx3 - mtx175 tractor service repair manualfusefjskekkmem
This document contains parts listings and diagrams for various components of McCormick MTX tractors, including engines, radiators, clutches, and other systems. It provides part numbers, descriptions, and diagrams to help with identifying replacement parts for MTX tractors from 2002-2007.
Mc cormick mtx series (2002 2007) - mtx3 - mtx165 tractor service repair manualfusefjskekkmem
This document provides parts information for various engine and drivetrain components for McCormick MTX tractors from 2002-2007, including engine assemblies, radiators, cooling system parts, air conditioning components, and drivetrain items like clutches, flywheels, gears, and pulleys. It lists part numbers, descriptions, and images for each component.
Mc cormick mtx series (2002 2007) - mtx3 - mtx155 tractor service repair manualfusefjskekkmem
This document is an exploded parts diagram for various engine and powertrain components for McCormick MTX tractors from 2002-2007, including the MTX155, MTX175, and MTX200 models. It provides part numbers and descriptions for items such as the engine housing assembly, damper, drive assembly, flywheel, gear, bolts, washers, seals, and other components.
Mc cormick g max (2008- ) - rp72 - 160 tractor service repair manualfusefjskekkmem
This document provides parts information for the repair and replacement of engine components. It lists part numbers, descriptions, and additional technical details like fit specifications and assembly/installation notes. The parts are for a McCormick tractor engine and include cylinders, pistons, gears, pumps, valves and other internal components.
Liebherr r906 1140 classic hydraulic excavator service repair manualfusefjskekkmem
This document is a service manual for Liebherr hydraulic excavators. It contains technical specifications and instructions for maintenance and repair. The manual is divided into sections covering the engine, hydraulic and electrical systems, swing mechanisms, tracks and other components. Safety symbols are introduced and procedures are marked for requirements, actions, and expected results. The manual is intended to assist technicians while not replacing proper training. It is produced and copyrighted by Liebherr.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Mc cormick gm series tier 2 (2003 2008) - rs11 - gm55 tractor service repair ...fusefjskekkmem
This document contains parts listings and technical specifications for components of an engine and related systems. It includes identification numbers, part names, quantities, and other details. Replacement parts are identified as well as overhaul parts. Sizes, material types and other variations are specified. The document provides an assembly-level breakdown of all individual parts.
Mc cormick gm series tier 2 (2003 2008) - rs11 - gm50 tractor service repair ...fusefjskekkmem
This document contains a list of component parts for engines and transmissions. It includes the part names and numbers, quantities needed, and notes on replacements and applications. Key information includes part designations for oversized/undersized parts and assemblies, reference numbers for related pages, and specifications for tractors from 2003-2008.
Mc cormick gm series tier 2 (2003 2008) - rs11 - gm40 tractor service repair ...fusefjskekkmem
This document contains parts listings and diagrams for engine components. It includes references for replacement parts, quantities needed, and size variations. Application and installation instructions should be referenced in the workshop manual.
Massey ferguson mf8130 tractor parts catalogue manualfusefjskekkmem
This document provides a list of parts for repairing or replacing components of a Massey Ferguson 8130 tractor engine. It includes detailed part numbers and descriptions for the cylinder block, crankshaft, pistons, connecting rods, cylinder head, rocker shaft, and turbocharger. Next to each part listing is additional information on interchangeability, quantity, and any comments about the part.
Massey ferguson mf8120 tractor parts catalogue manualfusefjskekkmem
This document provides parts information for the cylinder head of a Massey Ferguson 8120 tractor. It contains a parts list with 51 numbered items, including the cylinder head assembly, valves, guides, seals, springs, and fasteners. The list provides part numbers, quantities, descriptions, and notes on replacements and repairs. It is for a tractor with an engine serial number up to F044008.
Massey ferguson mf7724 mf7724 s tractor (dyna vt) (f092038 9999999) or (m77...fusefjskekkmem
This document provides a parts list and technical specifications for a Massey Ferguson 7724/7724S tractor. It includes 18 pages detailing over 200 individual parts for the engine, fuel system, axles, steering, brakes, hydraulics, electrical system, chassis, and other components. The parts are organized by system and include part numbers, quantities, descriptions, and reference images showing the component locations.
Kubota b2410 hsdb tractor parts catalogue manualfusefjskekkmem
This document provides instructions and part numbers for a parts book. It explains the column headings used on part number pages including the reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also provides notes about country codes that may be included to indicate part differences between countries.
Kubota b2410 hsd tractor parts catalogue manualfusefjskekkmem
This parts book page provides information on crankcase parts for a diesel engine. It lists 20 parts associated with the crankcase including the composite crankcase, caps, plugs, pins, bushes, bolts, gaskets and o-rings. Specifications are provided such as part numbers, descriptions, quantities used, applicable serial number ranges, interchangeability codes, and weights.
Kubota b2400 hse tractor parts catalogue manualfusefjskekkmem
The document provides instructions and definitions for parts books. It lists part numbers, descriptions, quantities, serial number ranges and other information for each part. Country codes are explained, noting some parts may be different in other countries. An index of parts is then listed for a B2400HSE machine, including the engine, fuel system, cooling, electrical and other systems.
Komatsu wa200 pz 6 wheel loader service repair manual sn70136 and upfusefjskekkmem
This document provides information about Komatsu wheel loaders, including:
- The shop manual covers models WA200-6 and WA200PZ-6.
- Sections include specifications, maintenance procedures, testing and adjustments, troubleshooting, and electrical systems.
- Technical details are provided for the engine, power train, steering, brakes, hydraulics, work equipment and electrical systems.
- Troubleshooting tables list potential issues, causes and remedies.
Komatsu wa200 pz 6 wheel loader service repair manual (sn 70001 and up)fusefjskekkmem
This document is a table of contents for a shop manual covering a WA200-6 and WA200PZ-6 wheel loader. The table of contents lists 10 sections covering specifications, structure and maintenance standards for the engine/cooling system, power train, steering system, brake system, undercarriage/frame, and hydraulic system. It provides an overview and outlines of the technical information and components that will be described in detail within the full shop manual.
Mc cormick t series tier 2 (2003 2007) - cp01 - t 85 f-m-t tractor service re...fusefjskekkmem
This document contains technical information for replacement parts for various engine components for McCormick T Series Tier 2 tractors from 2003-2007, including lists of parts, part numbers, engine numbers ranges that parts are applicable to, and other specifications. The parts are grouped by component and include details like quantity, reference numbers, and labeling for kit vs individual part.
Mc cormick t series compact (2001 2009) - ct00 - t60f tractor service repair ...fusefjskekkmem
This document contains parts lists and repair instructions for engine components for McCormick T Series Compact tractors from 2001-2009. It provides images and part numbers for cylinders, valves, plugs, seals, gaskets, and other engine parts. Reference numbers allow tracing components to their location in assemblies. Quantities of parts needed are specified for different production volumes. Overviews of repair and replacement procedures are also included.
Mc cormick mtx series (2002 2007) - mtx3 - mtx200 tractor service repair manualfusefjskekkmem
This document provides parts information for various engine and drivetrain components for McCormick MTX tractors from 2002-2007, including engine assemblies, radiators, cooling system parts, hydraulic pumps and motors, air conditioning components, clutches, and more. It lists part numbers, descriptions, and images for each component.
Mc cormick mtx series (2002 2007) - mtx3 - mtx185 tractor service repair manualfusefjskekkmem
This document provides parts information for various engine and drivetrain components for McCormick MTX tractors from 2002-2007, including engine assemblies, radiators, cooling system parts, hydraulic pumps and motors, air conditioning components, clutches, and more. It lists part numbers, descriptions, and images for each component.
Mc cormick mtx series (2002 2007) - mtx3 - mtx175 tractor service repair manualfusefjskekkmem
This document contains parts listings and diagrams for various components of McCormick MTX tractors, including engines, radiators, clutches, and other systems. It provides part numbers, descriptions, and diagrams to help with identifying replacement parts for MTX tractors from 2002-2007.
Mc cormick mtx series (2002 2007) - mtx3 - mtx165 tractor service repair manualfusefjskekkmem
This document provides parts information for various engine and drivetrain components for McCormick MTX tractors from 2002-2007, including engine assemblies, radiators, cooling system parts, air conditioning components, and drivetrain items like clutches, flywheels, gears, and pulleys. It lists part numbers, descriptions, and images for each component.
Mc cormick mtx series (2002 2007) - mtx3 - mtx155 tractor service repair manualfusefjskekkmem
This document is an exploded parts diagram for various engine and powertrain components for McCormick MTX tractors from 2002-2007, including the MTX155, MTX175, and MTX200 models. It provides part numbers and descriptions for items such as the engine housing assembly, damper, drive assembly, flywheel, gear, bolts, washers, seals, and other components.
Mc cormick g max (2008- ) - rp72 - 160 tractor service repair manualfusefjskekkmem
This document provides parts information for the repair and replacement of engine components. It lists part numbers, descriptions, and additional technical details like fit specifications and assembly/installation notes. The parts are for a McCormick tractor engine and include cylinders, pistons, gears, pumps, valves and other internal components.
Liebherr r906 1140 classic hydraulic excavator service repair manualfusefjskekkmem
This document is a service manual for Liebherr hydraulic excavators. It contains technical specifications and instructions for maintenance and repair. The manual is divided into sections covering the engine, hydraulic and electrical systems, swing mechanisms, tracks and other components. Safety symbols are introduced and procedures are marked for requirements, actions, and expected results. The manual is intended to assist technicians while not replacing proper training. It is produced and copyrighted by Liebherr.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
2. 15 - Engine
12 - Crankshaft
00 - General
15 - 73 9813/6900-6 15 - 73
00 - General
Introduction .................................................... 15-73
Technical Data ............................................... 15-74
Component Identification ............................... 15-75
Operation ....................................................... 15-76
Check (Condition) .......................................... 15-77
Remove and Install ....................................... 15-78
Introduction
Figure 285.
B
A
A Crankcase
B Crankshaft
3. 15 - Engine
12 - Crankshaft
00 - General
15 - 74 9813/6900-6 15 - 74
Technical Data
Table 100.
Main bearing journal diameter (x4)
- min 87.98mm
- max 88mm
Main rear bearing journal diameter (x1)
- min 99.98mm
- max 100mm
Connecting rod bearing journal diameter
- min 72.98mm
- max 73mm
Maximum wear and ovality on journals
(1)
Crankshaft induction hardness 55 HRc min on surface
Thrust washer width
- min 2.44mm
- max 2.5mm
Crankshaft end float
- min 0.05mm
- max 0.28mm
(1) No visible damage/wear or marks
4. 15 - Engine
12 - Crankshaft
00 - General
15 - 75 9813/6900-6 15 - 75
Component Identification
Figure 286.
B
A
A Crankcase
B Crankshaft
5. 15 - Engine
12 - Crankshaft
00 - General
15 - 76 9813/6900-6 15 - 76
Operation
Lubrication
Oil is fed from the main gallery via five drillings, one
to each of the main bearings. A groove around the
diameter of the upper main bearing shell allows oil
transfer to cross drillings in the crankshaft to feed
each of the big end bearings. Crankshaft gear is
'splash' lubricated. Front and rear crankshaft oil seals
prevent oil leakage from, and dirt ingress to, the
engine.
Figure 287.
1 Main gallery 2 Drillings (x5)
3 Main bearings 4 Big end bearings
5 Cross drillings 6 Crankshaft gear
7 Crankshaft oil seal 8 Crankshaft oil seal
6. 15 - Engine
12 - Crankshaft
00 - General
15 - 77 9813/6900-6 15 - 77
Check (Condition)
1. Check the main bearing surfaces for damage and
excessive wear.
Figure 288.
A
A Main bearing shells
2. Measure the crankshaft diameters to confirm
they are within service limits, refer to Technical
Data (PIL 15-12).
Figure 289.
B
B Crankshaft
3. Check that the oil-way cross drillings in the
crankshaft are clear and free from debris.
Blocked or restricted oil-ways will cause oil
starvation at the big end bearings.
4. Check that the piston cooling J-jets are clear. If
the J-jets cannot be cleared remove the fixing
screws. Remove theJ-jets and discard them.
5. Install new J-jets.
Figure 290.
D
C
C J-jets
D Fixing screws
7. 15 - Engine
12 - Crankshaft
00 - General
15 - 78 9813/6900-6 15 - 78
Remove and Install
Consumables
Description Part No. Size
Cleaner/Degreaser
- General purpose
solvent based parts
cleaner
4104/1557 0.4 L
CAUTION This component is heavy. It must only
be removed or handled using a suitable lifting
method and device.
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Remove the engine, refer to (PIL 15-00).
4. Remove the drive belt, refer to (PIL 15-18).
5. Remove the crankshaft pulley, refer to (PIL
15-12).
6. Remove the oil sump, refer to (PIL 15-45).
7. Disconnect and remove the fuel pipes from the
injectors, refer to (PIL 18-96).
8. Remove the rocker cover, refer to (PIL 15-42).
9. Remove the fuel injectors, refer to (PIL 18-18).
10. Remove the rocker assembly including the push
rods, refer to (PIL 15-42).
11. It is not necessary to remove the cylinder head
assembly to remove the crankshaft. If however
the cylinder head needs to be removed for other
reasons (for piston and connecting rod removal
for example) remove it now, refer to (PIL 15-06).
12. Remove the fuel injection pump, refer to (PIL
18-18).
13. Remove the starter motor, refer to (PIL 15-75).
14. Remove the high duty PTO device (if installed).
15. Position the engine upside down in a suitable jig
or fixture, supported at the front of the cylinder
block.
16. Remove the flywheel, refer to (PIL 15-54).
17. Remove the flywheel housing, refer to (PIL
15-54).
18. Remove the fuel injection pump drive gear, refer
to (PIL 15-51).
19. Remove the oil pump, refer to (PIL 15-60).
20. Remove the high duty PTO idler drive gear (if
installed), refer to (PIL 15-51).
21. Remove the crankshaft drive gear, refer to (PIL
15-51).
22. Remove the camshaft, refer to (PIL 15-15).
23. Remove the rear timing case, refer to (PIL
15-51).
24. If the pistons and connecting rods have not been
removed, undo and remove the main bearing
caps, refer to (PIL 15-12).
25. Remove the bedplate, refer to (PIL 15-09).
Remove
1. Remove the thrust washers between the
crankshaft and crankcase rear main bearing.
8. 15 - Engine
12 - Crankshaft
00 - General
15 - 79 9813/6900-6 15 - 79
Figure 291.
C
B
A
A
A Thrust Washers B Crankshaft
C Rear main bearing
2. Put labels on the thrust washers to make sure
that they are installed in the correct positions
during assembly.
3. Use suitable lifting equipment to carefully lift the
crankshaft from the crankcase (if the crankshaft
is lifted manually, two people will be required).
4. Carefully lift out the bearing shells.
Figure 292.
D
D Main bearing shells
5. It is recommended that the bearing shells are
replaced. If however they are to be used again,
put label on the shells to make sure that they
are installed in their original positions during
assembly.
6. Inspect the crankshaft and main bearings etc.
for damage and excessive wear. Refer to Check
Condition (PIL 15-12).
Before Installation
1. Clean off all traces of the old sealant compound
from the crankcase and bedplate mating faces.
2. Use a suitable degreasing agent to carefully
clean the main bearing saddles in the bedplate
and crankcase. Take care not to block the oil
ways or the piston cooling jets.
Consumable: Cleaner/Degreaser - General
purpose solvent based parts cleaner
Important: Cleanliness is of the utmost importance.
Blocked oil-ways or oil jets will cause engine failure.
Before you install the crankshaft make sure that ALL
oil-ways and jets are clear and free from debris.
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Make sure that all items are clean and free from
damage and corrosion.
3. If removed or a new crankcase is being installed
then install cooling J jets as follows:
9. 15 - Engine
12 - Crankshaft
00 - General
15 - 80 9813/6900-6 15 - 80
Figure 293.
F
E
E J jets (x4)
F Fixing screws
3.1. Insert the cooling jets into the crankcase.
3.2. Note: There are different types of cooling
jets installed depending on the engine
application. The jets are colour coded.
3.3. Be sure to install the correct jets. Refer to
the relevant parts catalogue for the correct
cooling jet identification.
3.4. Tighten the retaining screws to the correct
torque value.
4. Install the upper bearing shells as follows:
Figure 294.
D
G
D Main bearing shells
G Bearing location tab
4.1. Use a suitable degreasing agent to make
sure that the surface of the upper bearing
shells are clean.
Consumable: Cleaner/Degreaser - General
purpose solvent based parts cleaner
4.2. Assemble the bearing shells into the
crankcase bearing saddles. Make sure that
the location tab engages into the slot as
shown.
4.3. Important: Make sure that the oil-way holes
in the bearing saddles align with the holes
in the bearing shell. If the holes are even
partially misaligned the piston cooling oil jet
will be restricted, causing the engine to fail.
4.4. Lubricate the upper bearing shells with
clean engine oil.
5. Use suitable lifting equipment (if the crankshaft
is lifted manually, two people will be required), to
carefully lower the crankshaft into the crankcase.
DO NOT rotate the crankshaft, the bearing shells
can become dislodged, refer to step 4.
6. Install the thrust washers as follows:
10. 15 - Engine
12 - Crankshaft
00 - General
15 - 81 9813/6900-6 15 - 81
Figure 295.
C
B
A
A
A
H
A Thrust washers B Crankshaft
C Rear main bearing H Oil slot - thrust washers
6.1. Slide the thrust washers between the
crankshaft and the crankcase rear main
bearing.
6.2. Make sure that they are installed in the
correct positions, with the two slots facing
outwards from the bearing saddle.
6.3. If necessary, push the crankshaft forward
and then backwards to obtain clearance to
install the thrust washers.
6.4. DO NOT rotate the crankshaft, the bearing
shells can become dislodged, refer to step
4.
7. Check that the crankshaft end float is within
service limits, refer to Technical Data (PIL 15-12).
Table 101. Torque Values
Item Nm
F 24
11. 15 - Engine
12 - Crankshaft
03 - Main Bearing
15 - 82 9813/6900-6 15 - 82
03 - Main Bearing
Introduction .................................................... 15-82
Check (Condition) .......................................... 15-83
Remove and Install ....................................... 15-83
Introduction
In a piston engine, the main bearings are the
bearings on which the crankshaft rotates.
The bearings hold the crankshaft in place and
prevent the forces created by the piston and
transmitted to the crankshaft by the connecting rods
from dislodging the crankshaft, instead forcing the
crank to convert the reciprocating movement into
rotation.
Figure 296.
A
B
A Main bearing
B Crankshaft
12. 15 - Engine
12 - Crankshaft
03 - Main Bearing
15 - 83 9813/6900-6 15 - 83
Check (Condition)
1. Check the bearing shell surfaces for signs of
damage and excessive wear.
2. Measure the crank pin diameters to confirm they
are within service limits.
Refer to: PIL 15-12-00.
3. Renew any parts that are worn or not within the
specified tolerances.
Remove and Install
Refer to: PIL 15-12-00.
13. 15 - Engine
12 - Crankshaft
06 - Front Oil Seal
15 - 84 9813/6900-6 15 - 84
06 - Front Oil Seal
Remove and Install
Special Tools
Description Part No. Qty.
Crankshaft Front Oil
Seal Installation Tool
892/01157 1
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Get access to the engine.
4. Remove the drive belt, refer to (PIL 15-18).
5. Remove the crankshaft pulley, refer to (PIL
15-12-12).
Remove
1. Use a suitable lever behind the lip of the
seal, carefully prise out the oil seal from the
counterbore in the crankcase. Take care not
to scratch or damage the counterbore or the
crankshaft hub. Damaged or dirty sealing faces
will cause the oil seal to fail.
Figure 297.
C
A
B
A Crankshaft oil seal
B Crankcase
C Crankshaft hub
Install
1. Make sure that the counterbore and the
crankshaft hub are clean and free from damage
and corrosion. Use a suitable degreasing agent
to clean all traces of oil and grease from the
counterbore. Important: The oil seal has a special
coating and MUST be installed dry without
lubricant.
2. Dismantle the seal installation tool. Bolt the
centre body to the crankshaft hub, using the
bolts. Refer to Figure 298.
Special Tool: Crankshaft Front Oil Seal
Installation Tool (Qty.: 1)
3. Install the oil seal on to the centre body. Make
sure that the seal is installed the correct way
around. Assemble the outer sleeve on to the
centre body and install the screw. Refer to Figure
298.
14. 15 - Engine
12 - Crankshaft
06 - Front Oil Seal
15 - 85 9813/6900-6 15 - 85
Figure 298.
F D
G
H
B
G
F
C
A
E
A Crankshaft oil seal B Crankcase
C Crankshaft hub D Seal installation tool
E Fixing bolts (x3) F Centre body
G Outer sleeve H Screw
4. Turn the screw to push the seal squarely into
the counterbore until the outer sleeve comes
up against the front edge of the counterbore.
When correctly installed, the front face of the seal
should be flush with the edge of the counterbore
within the specified tolerance. Refer to Figure
299.
Dimension: -0.5 -0/+0.5mm
Figure 299.
B
G
F
C
A
A Crankshaft oil seal
B Crankcase
C Crankshaft hub
F Centre body
G Outer sleeve
5. Remove the seal installation tool.
15. 15 - Engine
12 - Crankshaft
06 - Front Oil Seal
15 - 86 9813/6900-6 15 - 86
After Installation
1. Install the crankshaft pulley, refer to (PIL
15-12-12).
2. Install the drive belt, refer to (PIL 15-18).
16. 15 - Engine
12 - Crankshaft
09 - Rear Oil Seal
15 - 87 9813/6900-6 15 - 87
09 - Rear Oil Seal
Remove and Install
Special Tools
Description Part No. Qty.
Crankshaft Rear Oil
Seal Installation Tool
892/01156 1
Crankshaft Rear Oil
Seal Alignment Tool
892/01158 1
Note: The flywheel hub and crankshaft rear oil seal
need to be replaced as a pair.
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Get access to the engine.
4. Remove the flywheel, refer to (PIL 15-54).
Remove
1. Use a suitable lever behind the lip of the seal
to carefully prise out the rear oil seal from the
counterbore in the flywheel housing. Take care
not to scratch or damage the counterbore or the
flywheel hub. Damaged or dirty sealing faces will
cause the oil seal to fail.
Figure 300. 24mm Hub
A
C B
A Crankshaft rear oil seal
B Flywheel housing
C Flywheel hub
Figure 301. 15mm Hub
A
C E
B
A Crankshaft rear oil seal
B Flywheel housing
C Flywheel hub
E Fixing bolt
Install (24mm Hub)
1. Make sure that the counterbore and the flywheel
hub are clean and free from damage and
corrosion.
17. 15 - Engine
12 - Crankshaft
09 - Rear Oil Seal
15 - 88 9813/6900-6 15 - 88
Figure 302.
B
A
D
D
C
A Crankshaft rear oil seal B Flywheel housing
C Flywheel hub D Oil seal alignment tool
2. To prevent the seal lip rolling over and becoming
damaged, make sure that you use the oil seal
alignment tool to initially install the oil seal on to
the flywheel hub. Locate the alignment tool over
the end of the hub, then carefully push the oil seal
over the alignment tool and on to the crankshaft
diameter. Make sure that the oil seal is installed
the correct way around.
Special Tool: Crankshaft Rear Oil Seal
Installation Tool (Qty.: 1)
Special Tool: Crankshaft Rear Oil Seal Alignment
Tool (Qty.: 1)
3. Apply lubricant P80 around the seal outer rubber
diameter.
4. Dismantle the oil seal installation tool. Bolt the
centre body to the flywheel hub, using the two
flywheel bolts. Assemble the outer sleeve on to
the centre body and install the screw.
Figure 303.
A
B
C
F
E
F
H
G
J
H
G
A Crankshaft rear oil seal B Flywheel housing
C Outer sleeve E Oil seal installation tool
F Flywheel bolts G Centre body
H Flywheel hub J Screw
5. Turn the screw to push the seal squarely into
the counterbore until the outer sleeve comes
up against the front edge of the counterbore.
When correctly installed, the front face of the seal
should be flush with the edge of the counterbore
within the tolerance specified.
Length/Dimension/Distance: 0.5mm
6. Remove the oil seal installation tool.
Install (15mm Hub)
1. Make sure that the counterbore and the hub are
clean and free from damage.
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. 15 - Engine
12 - Crankshaft
09 - Rear Oil Seal
15 - 89 9813/6900-6 15 - 89
Figure 304.
B
A
D
D
C
A Crankshaft rear oil seal B Flywheel housing
C Flywheel hub D Oil seal alignment tool
2. Install the new hub on to the crankshaft gear and
install the old hub on the outside of the new hub
to create a double thickness flywheel hub, install
the fixing bolt as shown at A. Do not touch the
PTFE seal lips of the crankshaft oil seal.
3. Make sure that you use the oil seal alignment tool
to initially install the oil seal on to the flywheel
hub to prevent damage to the seal lip. Locate the
alignment tool over the end of the hub, carefully
push the oil seal over the alignment tool as far
on to the crankshaft hub as possible. Make sure
that the seal is installed the correct way around.
Special Tool: Crankshaft Rear Oil Seal
Installation Tool (Qty.: 1)
Special Tool: Crankshaft Rear Oil Seal Alignment
Tool (Qty.: 1)
4. Apply the lubricant P80 around the seal outer
rubber diameter.
5. Dismantle the oil seal installation tool. Use the
two flywheel bolts to attach the centre body on to
the flywheel hub. Assemble the outer sleeve on
to the centre body include the extension ring and
install the screw.
Figure 305.
A
B
C1 C2
F
G
H
J
K
L
K
J
A Crankshaft rear oil seal B Flywheel housing
C1 New hub C2 Old hub
F Flywheel bolts G Oil seal installation tool
H Extension ring J Centre body
K Outer sleeve L Screw
6. Turn the screw to push the seal into position in
the counterbore so that the screw will not turn.
20. 15 - Engine
12 - Crankshaft
09 - Rear Oil Seal
15 - 90 9813/6900-6 15 - 90
7. Remove the oil seal installation tool, remove the
old hub and install the fixing bolt. Repeat steps 5
and 6 to fully install the rear oil seal.
8. Remove the oil seal installation tool.
After Installation
1. Install the flywheel, refer to (PIL 15-54).
Table 102. Torque Values
Item Nm
E 47
21. 15 - Engine
12 - Crankshaft
12 - Pulley
15 - 91 9813/6900-6 15 - 91
12 - Pulley
Remove and Install
Special Tools
Description Part No. Qty.
Torque Wrench
(10-100Nm)
993/70111 1
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Get access to the engine.
4. Remove the drive belt. Refer to (PIL 15-18).
Remove
1. Remove the fixing bolts and withdraw the pulley
from the crankshaft.
Figure 306.
A
B
A
A Crankshaft pulley
B Fixing bolts (x3)
2. The bolts must not be reused. Discard the bolts.
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Make sure that all items are clean and free from
damage and corrosion.
3. Renew the fixing bolts. Tighten the new bolts in
three stages to the correct torque value.
Special Tool: Torque Wrench (10-100Nm) (Qty.:
1)
4. The bolts are tightened using a torque and
angle method. Refer to Fasteners and Fixings,
General, Introduction (PIL 72-00).
Figure 307.
C
C Angle gauge (obtain locally)
After Replacement
1. Install the drive belt. Refer to (PIL 15-18).
Table 103.
Item Torque Value
(Nm)
Torque Angle
(Degrees)
2 (1st stage) 30N·m
2 (2nd stage) 75N·m
2 (Final stage) 180°