This service manual provides instructions for servicing the loader 455ZX. It contains sections on the machine components including the engine, fuel system, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The section on the crankshaft provides details on removing and installing the crankshaft, checking the crankshaft condition, and servicing the main bearings, front oil seal, and rear oil seal. Precise procedures are outlined along with required tools and safety precautions.
Jcb 3 cx backhoe loader service repair manual sn from 2509500 and upfdjjsekksemxs
This service manual provides instructions for servicing backhoe loaders models 3CX, 4CX, and 5CX. It contains sections covering the entire machine including the engine, fuel system, cooling system, brakes, steering, hydraulics, electrical system, and other components. The document provides detailed procedures, diagrams, and specifications for maintenance, repair, and removal/installation of parts. Safety warnings are included throughout advising technicians to read and understand instructions before working on the machine.
Jcb jcb116 roller service repair manual sn from 2492271 to 2492450dfujsjjekme
This service manual provides instructions for servicing the roller components of JCB machines models JCB116, JCB116D, JCB116DD, and VM116. It contains sections on removing and installing various parts including the crankshaft, main bearings, and connecting rods. Detailed steps and diagrams are provided, as well as torque specifications and lists of required consumables. Proper cleaning and inspection of parts is emphasized to avoid damage from blocked oil passages.
New holland ts6.110 110 hp tier 4 b (final) engine, 4wd, and cab. tractor ser...ufjjsjkekdmme
This document is a service manual for New Holland tractor models TS6.110, TS6.120, TS6.130, and TS6.140 with Tier 4B final diesel engines between 110-139 HP, covering 2-wheel drive, 4-wheel drive, cab, and high clearance configurations. The manual contains specifications, maintenance and repair instructions for the engine, transmission, axles, hydraulics, electrical systems, and other components.
New holland ts6.110 110 hp tier 4 b (final) engine, 2wd, and rops. tractor se...ufjjsjkekdmme
This document is a service manual for New Holland tractor models TS6.110, TS6.120, TS6.130, and TS6.140 with Tier 4B final diesel engines between 110-139 HP. The manual contains information on engine systems, transmission, axles, hydraulics, electrical systems, and other components. It provides repair and maintenance instructions for qualified service technicians.
New holland ts6.110 110 hp tier 4 b (final) engine, 2wd, and cab. tractor ser...ufjjsjkekdmme
This document is a service manual for New Holland TS6.110, TS6.120, TS6.130, and TS6.140 tractors from model years 2015-present. It contains information on engine systems, transmission, axles, brakes, hydraulics, electrical systems, and other components. The manual is intended to guide maintenance and repair work on these tractor models. It provides detailed component descriptions, specifications, diagrams and troubleshooting information.
New holland t5060 tractor service repair manualufjjsjkekdmme
This document outlines health and safety precautions and procedures related to working with chemicals, hazardous materials, welding, electricity, and other potential hazards. It provides guidance on proper protective equipment, ventilation, storage, fire safety, first aid, and legal compliance when handling various acids, solvents, dusts, fumes, and other substances. Adhering to the outlined precautions and procedures is necessary to protect health and avoid injury.
New holland t5050 tractor service repair manualufjjsjkekdmme
This document outlines health and safety precautions and first aid procedures for working with various chemicals, materials and processes that may be encountered when servicing agricultural equipment. Hazards associated with acids, alkalis, solvents, dusts, fumes, fires and electric shock are discussed. Do's and don'ts are provided, and it is recommended to follow legal requirements and use proper protective equipment when handling potentially dangerous substances.
New holland t5040 tractor service repair manualufjjsjkekdmme
This document outlines health and safety precautions and first aid procedures for working with various chemicals, materials and processes that may be encountered when servicing agricultural equipment. Hazards associated with acids, alkalis, solvents, dusts, fumes, fires and electric shock are discussed. Do's and don'ts are provided, and it is recommended to follow legal requirements and use proper protective equipment when handling potentially dangerous substances.
Jcb 3 cx backhoe loader service repair manual sn from 2509500 and upfdjjsekksemxs
This service manual provides instructions for servicing backhoe loaders models 3CX, 4CX, and 5CX. It contains sections covering the entire machine including the engine, fuel system, cooling system, brakes, steering, hydraulics, electrical system, and other components. The document provides detailed procedures, diagrams, and specifications for maintenance, repair, and removal/installation of parts. Safety warnings are included throughout advising technicians to read and understand instructions before working on the machine.
Jcb jcb116 roller service repair manual sn from 2492271 to 2492450dfujsjjekme
This service manual provides instructions for servicing the roller components of JCB machines models JCB116, JCB116D, JCB116DD, and VM116. It contains sections on removing and installing various parts including the crankshaft, main bearings, and connecting rods. Detailed steps and diagrams are provided, as well as torque specifications and lists of required consumables. Proper cleaning and inspection of parts is emphasized to avoid damage from blocked oil passages.
New holland ts6.110 110 hp tier 4 b (final) engine, 4wd, and cab. tractor ser...ufjjsjkekdmme
This document is a service manual for New Holland tractor models TS6.110, TS6.120, TS6.130, and TS6.140 with Tier 4B final diesel engines between 110-139 HP, covering 2-wheel drive, 4-wheel drive, cab, and high clearance configurations. The manual contains specifications, maintenance and repair instructions for the engine, transmission, axles, hydraulics, electrical systems, and other components.
New holland ts6.110 110 hp tier 4 b (final) engine, 2wd, and rops. tractor se...ufjjsjkekdmme
This document is a service manual for New Holland tractor models TS6.110, TS6.120, TS6.130, and TS6.140 with Tier 4B final diesel engines between 110-139 HP. The manual contains information on engine systems, transmission, axles, hydraulics, electrical systems, and other components. It provides repair and maintenance instructions for qualified service technicians.
New holland ts6.110 110 hp tier 4 b (final) engine, 2wd, and cab. tractor ser...ufjjsjkekdmme
This document is a service manual for New Holland TS6.110, TS6.120, TS6.130, and TS6.140 tractors from model years 2015-present. It contains information on engine systems, transmission, axles, brakes, hydraulics, electrical systems, and other components. The manual is intended to guide maintenance and repair work on these tractor models. It provides detailed component descriptions, specifications, diagrams and troubleshooting information.
New holland t5060 tractor service repair manualufjjsjkekdmme
This document outlines health and safety precautions and procedures related to working with chemicals, hazardous materials, welding, electricity, and other potential hazards. It provides guidance on proper protective equipment, ventilation, storage, fire safety, first aid, and legal compliance when handling various acids, solvents, dusts, fumes, and other substances. Adhering to the outlined precautions and procedures is necessary to protect health and avoid injury.
New holland t5050 tractor service repair manualufjjsjkekdmme
This document outlines health and safety precautions and first aid procedures for working with various chemicals, materials and processes that may be encountered when servicing agricultural equipment. Hazards associated with acids, alkalis, solvents, dusts, fumes, fires and electric shock are discussed. Do's and don'ts are provided, and it is recommended to follow legal requirements and use proper protective equipment when handling potentially dangerous substances.
New holland t5040 tractor service repair manualufjjsjkekdmme
This document outlines health and safety precautions and first aid procedures for working with various chemicals, materials and processes that may be encountered when servicing agricultural equipment. Hazards associated with acids, alkalis, solvents, dusts, fumes, fires and electric shock are discussed. Do's and don'ts are provided, and it is recommended to follow legal requirements and use proper protective equipment when handling potentially dangerous substances.
Jcb 506 36 telescopic handler service repair manual sn from 2433101 onwardsufjjsjkekdmme
This document provides instructions for servicing components of the engine on JCB Loadall vehicles, including procedures for checking, removing, and installing engine belts, oil filters, air filters, and other parts. Safety precautions are outlined, such as ensuring the engine is cool before working. Diagrams show components like the belt routing and filter assembly. Torque specifications are provided for fasteners.
Jcb 457 wheel loader service repair manual (sn from 2244514 onwards)ufjjsjkekdmme
This service manual provides instructions for servicing the loader model 457. It contains sections covering the machine, attachments, body and framework, operator station, HVAC system, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, electrical system, fasteners and fixings, and consumable products. The section on the crankcase ventilation filter describes its components and explains how it separates oil from blow-by gases. The section on valves provides instructions for checking clearances and adjusting valves. The section on the alternator describes its operation and components and provides safety information.
Jcb 455 zx wheel loader service repair manual (sn 2414602 and up)ufjjsjkekdmme
This service manual provides instructions for servicing the loader 455ZX. It contains sections on the machine components including the engine, fuel system, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The section on the crankshaft provides details on removing and installing the crankshaft, checking the crankshaft condition, and servicing the main bearings, front oil seal, and rear oil seal. Precise procedures are outlined along with required tools and safety precautions.
This document provides standard torque settings for fasteners used on JCB machines. It identifies zinc plated fasteners and Dacromet fasteners, which have a silver mottled finish and replace earlier zinc and yellow plated fasteners. Dacromet fasteners have a lower torque setting than zinc fasteners due to differences in material properties. Tables of torque settings are provided for UNF and metric fasteners in various sizes, distinguishing between lubricated and unlubricated conditions. Proper matching of fastener types and using the correct torque values for each is important to achieve the designed clamping force.
Jcb 430 zx (jcb engine) wheeled loading shovel service repair manual from 176...ufjjsjkekdmme
This document provides standard torque settings for fasteners used on JCB machines. It identifies zinc plated fasteners and Dacromet fasteners, which have a silver mottled finish and replace earlier zinc and yellow plated fasteners. Dacromet fasteners have a lower torque setting than zinc fasteners due to differences in material properties. Tables of torque settings are provided for UNF and metric fasteners in various sizes, distinguishing between lubricated and unlubricated conditions. Proper matching of fastener types and using the correct torque settings for each is important to achieve the designed clamping force.
This document provides standard torque settings for fasteners used on JCB machines. It identifies zinc plated fasteners and Dacromet fasteners, which have a silver mottled finish and replace earlier zinc and yellow plated fasteners. Dacromet fasteners have a lower torque setting than zinc fasteners due to differences in material properties. Tables of torque settings are provided for UNF and metric fasteners in various sizes, distinguishing between lubricated and unlubricated conditions. Proper matching of fastener types and using the correct torque settings for each is important to achieve correct fastening.
Jcb 422 zx wheel loading shovel service repair manual (sn from 2089665 to 209...ufjjsjkekdmme
This document provides information about identifying machines and standard torque settings for fasteners. It describes the machine identification plate and engine data plate that provide the serial numbers and other details to uniquely identify the specific machine. It also provides tables listing the torque settings that should be used for different sizes of zinc-plated, Dacromet, and metric grade fasteners. Dacromet fasteners have a lower torque setting than zinc-plated fasteners. The document emphasizes using the correct torque settings for the specific fastener type.
Jcb 409 (2504 m tier 4f) kohler engine wheel loading shovel service repair ma...ufjjsjkekdmme
This service manual provides instructions for servicing the loader crankshaft. It describes how the crankshaft is lubricated via oil drillings and passages. The summary provides instructions to remove the crankshaft, check components for wear, clean oil passages, and install new seals before reinstalling the crankshaft and adjusting end float clearance. Proper cleaning and installation of seals is emphasized to prevent oil leakage and engine failure.
Jcb 409 (2504 m tier 4f) kohler engine wheel loading shovel service repair ma...ufjjsjkekdmme
This service manual provides instructions for servicing the loader crankshaft. It describes how the crankshaft is lubricated via oil drillings and passages. The summary provides instructions to remove the crankshaft, check components for wear, clean oil passages, and install new seals before reinstalling the crankshaft and adjusting end float clearance. Proper cleaning and installation of seals is emphasized to prevent oil leakage and engine failure.
Jcb 409 (2504 m tier 4f) kohler engine wheel loading shovel service repair ma...ufjjsjkekdmme
This service manual provides instructions for servicing the loader crankshaft. It describes how the crankshaft is lubricated via oil drillings and passages. The summary provides instructions to remove the crankshaft, check components for wear, clean oil passages, and install new seals before reinstalling the crankshaft and adjusting end float clearance. Proper cleaning and installation of seals is emphasized to prevent oil leakage and engine failure.
Jcb 409 (2504 m tier 4f) kohler engine wheel loading shovel service repair ma...ufjjsjkekdmme
This service manual provides instructions for servicing the main components of a loader, including the crankshaft and main bearings. The crankshaft is lubricated by oil passages that feed each main and big end bearing. Proper lubrication and clearance of these components is essential for safe engine operation. Technicians are instructed to carefully clean, inspect, measure, and replace worn parts as necessary when servicing the crankshaft and main bearings.
Jcb 407 (2504 m tier 4f) kohler engine wheel loading shovel service repair ma...ufjjsjkekdmme
This service manual provides instructions for servicing the loader crankshaft. It describes how the crankshaft is lubricated via oil drillings and passages. The summary provides instructions to remove the crankshaft, check components for wear, clean oil passages, and install new seals before reinstalling the crankshaft and adjusting end float clearance. Proper cleaning and installation of seals is emphasized to prevent oil leakage and engine failure.
Jcb 407 (2504 m tier 4f) kohler engine wheel loading shovel service repair ma...ufjjsjkekdmme
This service manual provides instructions for servicing the loader crankshaft. It describes how the crankshaft is lubricated via oil drillings and passages. The summary provides instructions to remove the crankshaft, check components for wear, clean oil passages, and install new seals before reinstalling the crankshaft and torquing components. Proper cleaning and inspection of parts is emphasized to prevent engine failure from blocked oil passages.
Jcb 407 (2504 m tier 4f) kohler engine wheel loading shovel service repair ma...ufjjsjkekdmme
This service manual provides instructions for servicing the loader crankshaft. It describes how the crankshaft is lubricated via oil drillings and passages. The summary provides instructions to remove the crankshaft, check components for wear, clean oil passages, and install new seals before reinstalling the crankshaft and torquing components. Proper cleaning and inspection of parts is emphasized to prevent engine failure from blocked oil passages.
Jcb 407 (2504 m tier 4f) kohler engine wheel loading shovel service repair ma...ufjjsjkekdmme
This service manual provides instructions for servicing the loader crankshaft. It describes how the crankshaft is lubricated via oil drillings and passages. The summary provides instructions to remove the crankshaft, check components for wear, clean oil passages, and install new seals before reinstalling the crankshaft and adjusting end float clearance. Proper cleaning and installation of seals is emphasized to prevent oil leakage and engine failure.
Jcb 406 (2504 m tier 3) kohler engine wheel loading shovel service repair man...ufjjsjkekdmme
This service manual provides instructions for servicing the loader crankshaft. It describes how the crankshaft is lubricated via oil drillings and passages. The summary provides instructions for removing and installing the crankshaft, main bearings, and rear oil seal. Cleanliness is critical to prevent blocked passages. The crankshaft, bearings and seals must be checked for wear and replaced as needed.
Jcb 330 skid steer loader service repair manual sn from 2584341 to 2584840ufjjsjkekdmme
This service manual provides instructions for servicing skid steer loaders and their components. It contains sections on the machine body and framework, operator station, engine, driveline, hydraulic system, electrical system, and other systems. The section on the engine covers maintenance and repair of the rocker and fittings, including procedures for removing and installing the rocker assembly, rocker cover, and tappets. Detailed diagrams and step-by-step instructions are provided for servicing these engine components. Safety warnings are included to remind technicians to take proper precautions when working on the engine.
Jcb 330 skid steer loader service repair manual sn from 2556651 to 2556850ufjjsjkekdmme
This service manual provides instructions for servicing skid steer loaders and their components. It contains sections on the machine body and framework, operator station, engine, driveline, hydraulic system, electrical system, and other systems. The section on the engine covers maintenance and repair of the rocker and fittings, including procedures for removing and installing the rocker assembly, rocker cover, and tappets. Detailed diagrams and step-by-step instructions are provided for servicing these engine components. Safety warnings are included to remind technicians to take appropriate precautions when working on the engine.
Jcb 330 skid steer loader service repair manual sn from 2503001 to 2503500ufjjsjkekdmme
This service manual provides instructions for servicing skid steer loaders and their components. It contains sections on the machine body and framework, operator station, engine, driveline, hydraulic system, electrical system, and other systems. The section on the engine covers maintenance and repair of the rocker and fittings, including procedures for removing and installing the rocker assembly, rocker cover, and tappets. Detailed diagrams and step-by-step instructions are provided for servicing these engine components. Safety warnings are included to remind technicians to take appropriate precautions when working on the engine.
Jcb 330 skid steer loader service repair manual sn from 2499351 to 2499500ufjjsjkekdmme
This service manual provides instructions for servicing skid steer loaders and their components. It contains sections on the machine body and framework, operator station, engine, driveline, hydraulic system, electrical system, and other systems. The section on the engine covers maintenance and repair of the rocker and fittings, including procedures for removing and installing the rocker assembly, rocker cover, and tappets. Detailed diagrams and step-by-step instructions are provided for servicing these engine components. Safety warnings are included to remind technicians to take appropriate precautions when working on the engine.
Jcb 506 36 telescopic handler service repair manual sn from 2433101 onwardsufjjsjkekdmme
This document provides instructions for servicing components of the engine on JCB Loadall vehicles, including procedures for checking, removing, and installing engine belts, oil filters, air filters, and other parts. Safety precautions are outlined, such as ensuring the engine is cool before working. Diagrams show components like the belt routing and filter assembly. Torque specifications are provided for fasteners.
Jcb 457 wheel loader service repair manual (sn from 2244514 onwards)ufjjsjkekdmme
This service manual provides instructions for servicing the loader model 457. It contains sections covering the machine, attachments, body and framework, operator station, HVAC system, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, electrical system, fasteners and fixings, and consumable products. The section on the crankcase ventilation filter describes its components and explains how it separates oil from blow-by gases. The section on valves provides instructions for checking clearances and adjusting valves. The section on the alternator describes its operation and components and provides safety information.
Jcb 455 zx wheel loader service repair manual (sn 2414602 and up)ufjjsjkekdmme
This service manual provides instructions for servicing the loader 455ZX. It contains sections on the machine components including the engine, fuel system, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The section on the crankshaft provides details on removing and installing the crankshaft, checking the crankshaft condition, and servicing the main bearings, front oil seal, and rear oil seal. Precise procedures are outlined along with required tools and safety precautions.
This document provides standard torque settings for fasteners used on JCB machines. It identifies zinc plated fasteners and Dacromet fasteners, which have a silver mottled finish and replace earlier zinc and yellow plated fasteners. Dacromet fasteners have a lower torque setting than zinc fasteners due to differences in material properties. Tables of torque settings are provided for UNF and metric fasteners in various sizes, distinguishing between lubricated and unlubricated conditions. Proper matching of fastener types and using the correct torque values for each is important to achieve the designed clamping force.
Jcb 430 zx (jcb engine) wheeled loading shovel service repair manual from 176...ufjjsjkekdmme
This document provides standard torque settings for fasteners used on JCB machines. It identifies zinc plated fasteners and Dacromet fasteners, which have a silver mottled finish and replace earlier zinc and yellow plated fasteners. Dacromet fasteners have a lower torque setting than zinc fasteners due to differences in material properties. Tables of torque settings are provided for UNF and metric fasteners in various sizes, distinguishing between lubricated and unlubricated conditions. Proper matching of fastener types and using the correct torque settings for each is important to achieve the designed clamping force.
This document provides standard torque settings for fasteners used on JCB machines. It identifies zinc plated fasteners and Dacromet fasteners, which have a silver mottled finish and replace earlier zinc and yellow plated fasteners. Dacromet fasteners have a lower torque setting than zinc fasteners due to differences in material properties. Tables of torque settings are provided for UNF and metric fasteners in various sizes, distinguishing between lubricated and unlubricated conditions. Proper matching of fastener types and using the correct torque settings for each is important to achieve correct fastening.
Jcb 422 zx wheel loading shovel service repair manual (sn from 2089665 to 209...ufjjsjkekdmme
This document provides information about identifying machines and standard torque settings for fasteners. It describes the machine identification plate and engine data plate that provide the serial numbers and other details to uniquely identify the specific machine. It also provides tables listing the torque settings that should be used for different sizes of zinc-plated, Dacromet, and metric grade fasteners. Dacromet fasteners have a lower torque setting than zinc-plated fasteners. The document emphasizes using the correct torque settings for the specific fastener type.
Jcb 409 (2504 m tier 4f) kohler engine wheel loading shovel service repair ma...ufjjsjkekdmme
This service manual provides instructions for servicing the loader crankshaft. It describes how the crankshaft is lubricated via oil drillings and passages. The summary provides instructions to remove the crankshaft, check components for wear, clean oil passages, and install new seals before reinstalling the crankshaft and adjusting end float clearance. Proper cleaning and installation of seals is emphasized to prevent oil leakage and engine failure.
Jcb 409 (2504 m tier 4f) kohler engine wheel loading shovel service repair ma...ufjjsjkekdmme
This service manual provides instructions for servicing the loader crankshaft. It describes how the crankshaft is lubricated via oil drillings and passages. The summary provides instructions to remove the crankshaft, check components for wear, clean oil passages, and install new seals before reinstalling the crankshaft and adjusting end float clearance. Proper cleaning and installation of seals is emphasized to prevent oil leakage and engine failure.
Jcb 409 (2504 m tier 4f) kohler engine wheel loading shovel service repair ma...ufjjsjkekdmme
This service manual provides instructions for servicing the loader crankshaft. It describes how the crankshaft is lubricated via oil drillings and passages. The summary provides instructions to remove the crankshaft, check components for wear, clean oil passages, and install new seals before reinstalling the crankshaft and adjusting end float clearance. Proper cleaning and installation of seals is emphasized to prevent oil leakage and engine failure.
Jcb 409 (2504 m tier 4f) kohler engine wheel loading shovel service repair ma...ufjjsjkekdmme
This service manual provides instructions for servicing the main components of a loader, including the crankshaft and main bearings. The crankshaft is lubricated by oil passages that feed each main and big end bearing. Proper lubrication and clearance of these components is essential for safe engine operation. Technicians are instructed to carefully clean, inspect, measure, and replace worn parts as necessary when servicing the crankshaft and main bearings.
Jcb 407 (2504 m tier 4f) kohler engine wheel loading shovel service repair ma...ufjjsjkekdmme
This service manual provides instructions for servicing the loader crankshaft. It describes how the crankshaft is lubricated via oil drillings and passages. The summary provides instructions to remove the crankshaft, check components for wear, clean oil passages, and install new seals before reinstalling the crankshaft and adjusting end float clearance. Proper cleaning and installation of seals is emphasized to prevent oil leakage and engine failure.
Jcb 407 (2504 m tier 4f) kohler engine wheel loading shovel service repair ma...ufjjsjkekdmme
This service manual provides instructions for servicing the loader crankshaft. It describes how the crankshaft is lubricated via oil drillings and passages. The summary provides instructions to remove the crankshaft, check components for wear, clean oil passages, and install new seals before reinstalling the crankshaft and torquing components. Proper cleaning and inspection of parts is emphasized to prevent engine failure from blocked oil passages.
Jcb 407 (2504 m tier 4f) kohler engine wheel loading shovel service repair ma...ufjjsjkekdmme
This service manual provides instructions for servicing the loader crankshaft. It describes how the crankshaft is lubricated via oil drillings and passages. The summary provides instructions to remove the crankshaft, check components for wear, clean oil passages, and install new seals before reinstalling the crankshaft and torquing components. Proper cleaning and inspection of parts is emphasized to prevent engine failure from blocked oil passages.
Jcb 407 (2504 m tier 4f) kohler engine wheel loading shovel service repair ma...ufjjsjkekdmme
This service manual provides instructions for servicing the loader crankshaft. It describes how the crankshaft is lubricated via oil drillings and passages. The summary provides instructions to remove the crankshaft, check components for wear, clean oil passages, and install new seals before reinstalling the crankshaft and adjusting end float clearance. Proper cleaning and installation of seals is emphasized to prevent oil leakage and engine failure.
Jcb 406 (2504 m tier 3) kohler engine wheel loading shovel service repair man...ufjjsjkekdmme
This service manual provides instructions for servicing the loader crankshaft. It describes how the crankshaft is lubricated via oil drillings and passages. The summary provides instructions for removing and installing the crankshaft, main bearings, and rear oil seal. Cleanliness is critical to prevent blocked passages. The crankshaft, bearings and seals must be checked for wear and replaced as needed.
Jcb 330 skid steer loader service repair manual sn from 2584341 to 2584840ufjjsjkekdmme
This service manual provides instructions for servicing skid steer loaders and their components. It contains sections on the machine body and framework, operator station, engine, driveline, hydraulic system, electrical system, and other systems. The section on the engine covers maintenance and repair of the rocker and fittings, including procedures for removing and installing the rocker assembly, rocker cover, and tappets. Detailed diagrams and step-by-step instructions are provided for servicing these engine components. Safety warnings are included to remind technicians to take proper precautions when working on the engine.
Jcb 330 skid steer loader service repair manual sn from 2556651 to 2556850ufjjsjkekdmme
This service manual provides instructions for servicing skid steer loaders and their components. It contains sections on the machine body and framework, operator station, engine, driveline, hydraulic system, electrical system, and other systems. The section on the engine covers maintenance and repair of the rocker and fittings, including procedures for removing and installing the rocker assembly, rocker cover, and tappets. Detailed diagrams and step-by-step instructions are provided for servicing these engine components. Safety warnings are included to remind technicians to take appropriate precautions when working on the engine.
Jcb 330 skid steer loader service repair manual sn from 2503001 to 2503500ufjjsjkekdmme
This service manual provides instructions for servicing skid steer loaders and their components. It contains sections on the machine body and framework, operator station, engine, driveline, hydraulic system, electrical system, and other systems. The section on the engine covers maintenance and repair of the rocker and fittings, including procedures for removing and installing the rocker assembly, rocker cover, and tappets. Detailed diagrams and step-by-step instructions are provided for servicing these engine components. Safety warnings are included to remind technicians to take appropriate precautions when working on the engine.
Jcb 330 skid steer loader service repair manual sn from 2499351 to 2499500ufjjsjkekdmme
This service manual provides instructions for servicing skid steer loaders and their components. It contains sections on the machine body and framework, operator station, engine, driveline, hydraulic system, electrical system, and other systems. The section on the engine covers maintenance and repair of the rocker and fittings, including procedures for removing and installing the rocker assembly, rocker cover, and tappets. Detailed diagrams and step-by-step instructions are provided for servicing these engine components. Safety warnings are included to remind technicians to take appropriate precautions when working on the engine.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
2. 15 - Engine
12 - Crankshaft
00 - General
15 - 61 9813/4800-3 15 - 61
Component Identification
Figure 152.
A
B
A Crankshaft
B Crankcase
3. 15 - Engine
12 - Crankshaft
00 - General
15 - 62 9813/4800-3 15 - 62
Operation
Refer to Camshaft - Introduction. Refer to: PIL
15-15-00.
Lubrication
Oil is fed from the main gallery via seven drillings,
one to each of the main bearings. A groove around
the diameter of the upper main bearing shell allows
oil transfer to cross drillings in the crankshaft to feed
each of the big end bearings. Crankshaft gear is
'splash' lubricated. Front and rear crankshaft oil seals
prevent oil leakage from, and dirt ingress to, the
engine.
Figure 153.
222
2222
2
2
2
2
2
1
5
5
5
5
5
2
7
6
2
5
3
4
3
4
3
4
3
4
3
4
3
4
3
4
3
4
3
4
3
3
4
3
4
3
4
3
1 Main gallery 2 Drillings (x7)
3 Main bearings 4 Big end bearings
5 Cross drillings 6 Crankshaft gear
7 Crankshaft oil seal
4. 15 - Engine
12 - Crankshaft
00 - General
15 - 63 9813/4800-3 15 - 63
Check (Condition)
1. Check the main bearing surfaces for damage and
excessive wear.
Figure 154.
A
A Main bearing shells
2. Measure the crankshaft diameters to confirm
they are within service limits, refer to Technical
Data (PIL 15-12).
Figure 155.
A
B Crankshaft
3. Check that the oil-way cross drillings in the
crankshaft are clear and free from debris.
Blocked or restricted oil-ways will cause oil
starvation at the big end bearings.
4. Check that the piston cooling J-jets are clear. If
the J-jets cannot be cleared remove the fixing
screws. Remove the J-jets and discard them.
5. Install new J-jets.
Figure 156.
D
C
C J-jets
D Fixing screws
5. 15 - Engine
12 - Crankshaft
00 - General
15 - 64 9813/4800-3 15 - 64
Remove and Install
Consumables
Description Part No. Size
Cleaner/Degreaser
- General purpose
solvent based parts
cleaner
4104/1557 0.4L
CAUTION This component is heavy. It must only
be removed or handled using a suitable lifting
method and device.
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Remove the engine, refer to (PIL 15-00).
4. Remove the drive belt, refer to (PIL 15-18).
5. Remove the crankshaft pulley, refer to (PIL
15-12).
6. Remove the oil sump, refer to (PIL 15-45).
7. Disconnect and remove the fuel pipes from the
injectors, refer to (PIL 18-96).
8. Remove the rocker cover, refer to (PIL 15-42).
9. Remove the fuel injectors, refer to (PIL 18-18).
10. Remove the rocker assembly including the push
rods, refer to (PIL 15-42).
11. It is not necessary to remove the cylinder head
assembly to remove the crankshaft. If however
the cylinder head needs to be removed for other
reasons (for piston and connecting rod removal
for example) remove it now, refer to (PIL 15-06).
12. Remove the fuel injection pump, refer to (PIL
18-18).
13. Remove the starter motor, refer to (PIL 15-75).
14. Remove the high duty PTO device (if installed).
15. Position the engine upside down in a suitable jig
or fixture, supported at the front of the cylinder
block.
16. Remove the flywheel, refer to (PIL 15-54).
17. Remove the flywheel housing, refer to (PIL
15-54).
18. Remove the fuel injection pump drive gear, refer
to (PIL 15-51).
19. Remove the oil pump, refer to (PIL 15-60).
20. Remove the high duty PTO idler drive gear (if
installed), refer to (PIL 15-51).
21. Remove the crankshaft drive gear, refer to (PIL
15-51).
22. Remove the camshaft, refer to (PIL 15-15).
23. Remove the rear timing case, refer to (PIL
15-51).
24. If the pistons and connecting rods have not been
removed, undo and remove the main bearing
caps, refer to (PIL 15-12).
25. Remove the bedplate, refer to (PIL 15-09).
Remove
1. Remove the thrust washers between the
crankshaft and crankcase rear main bearing.
Figure 157.
B
A
C
A
A Thrust Washers
B Crankshaft
C Rear main bearing
2. Put labels on the thrust washers to make sure
that they are installed in the correct positions
during assembly.
3. Use suitable lifting equipment to carefully lift the
crankshaft from the crankcase (if the crankshaft
is lifted manually, two people will be required).
4. Carefully lift out the bearing shells.
6. 15 - Engine
12 - Crankshaft
00 - General
15 - 65 9813/4800-3 15 - 65
Figure 158.
A
A Main bearing shells
5. It is recommended that the bearing shells are
replaced. If however they are to be used again,
put label on the shells to make sure that they
are installed in their original positions during
assembly.
6. Inspect the crankshaft and main bearings etc.
for damage and excessive wear. Refer to Check
Condition (PIL 15-12).
Before Installation
1. Clean off all traces of the old sealant compound
from the crankcase and bedplate mating faces.
2. Use a suitable degreasing agent to carefully
clean the main bearing saddles in the bedplate
and crankcase. Take care not to block the oil
ways or the piston cooling jets.
Consumable: Cleaner/Degreaser - General
purpose solvent based parts cleaner
Important: Cleanliness is of the utmost importance.
Blocked oil-ways or oil jets will cause engine failure.
Before you install the crankshaft make sure that ALL
oil-ways and jets are clear and free from debris.
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Make sure that all items are clean and free from
damage and corrosion.
3. If removed or a new crankcase is being installed
then install cooling J jets as follows:
Figure 159.
D
C
C J jets (x4)
D Fixing screws
3.1. Insert the cooling jets into the crankcase.
3.2. Note: There are different types of cooling
jets installed depending on the engine
application. The jets are colour coded.
3.3. Be sure to install the correct jets. Refer to
the relevant parts catalogue for the correct
cooling jet identification.
3.4. Tighten the retaining screws to the correct
torque value.
4. Install the upper bearing shells as follows:
4.1. Use a suitable degreasing agent to make
sure that the surface of the upper bearing
shells are clean.
Consumable: Cleaner/Degreaser - General
purpose solvent based parts cleaner
4.2. Assemble the bearing shells into the
crankcase bearing saddles. Make sure that
the location tab engages into the slot as
shown.
4.3. Important: Make sure that the oil-way holes
in the bearing saddles align with the holes
in the bearing shell. If the holes are even
partially misaligned the piston cooling oil jet
will be restricted, causing the engine to fail.
4.4. Lubricate the upper bearing shells with
clean engine oil.
5. Use suitable lifting equipment (if the crankshaft
is lifted manually, two people will be required), to
carefully lower the crankshaft into the crankcase.
DO NOT rotate the crankshaft, the bearing shells
can become dislodged, refer to step 4.
6. Install the thrust washers as follows:
7. 15 - Engine
12 - Crankshaft
00 - General
15 - 66 9813/4800-3 15 - 66
Figure 160.
B
A
C
A A
H
A Thrust washers
B Crankshaft
C Rear main bearing
H Oil slot - thrust washers
6.1. Slide the thrust washers between the
crankshaft and the crankcase rear main
bearing.
6.2. Make sure that they are installed in the
correct positions, with the two slots facing
outwards from the bearing saddle.
6.3. If necessary, push the crankshaft forward
and then backwards to obtain clearance to
install the thrust washers.
6.4. DO NOT rotate the crankshaft, the bearing
shells can become dislodged, refer to step
4.
7. Check that the crankshaft end float is within
service limits, refer to Technical Data (PIL 15-12).
Table 62. Torque Values
Item Nm
F 24
8. 15 - Engine
12 - Crankshaft
03 - Main Bearing
15 - 67 9813/4800-3 15 - 67
03 - Main Bearing
Introduction .................................................... 15-67
Check (Condition) .......................................... 15-68
Remove and Install ....................................... 15-68
Introduction
In a piston engine, the main bearings are the
bearings on which the crankshaft rotates.
The bearings hold the crankshaft in place and
prevent the forces created by the piston and
transmitted to the crankshaft by the connecting rods
from dislodging the crankshaft, instead forcing the
crank to convert the reciprocating movement into
rotation.
Figure 161.
A
B
A Main bearing
B Crankshaft
9. 15 - Engine
12 - Crankshaft
03 - Main Bearing
15 - 68 9813/4800-3 15 - 68
Check (Condition)
1. Check the bearing shell surfaces for signs of
damage and excessive wear.
2. Measure the crank pin diameters to confirm they
are within service limits.
Refer to: PIL 15-12-00.
3. Renew any parts that are worn or not within the
specified tolerances.
Remove and Install
Refer to: PIL 15-12-00.
10. 15 - Engine
12 - Crankshaft
06 - Front Oil Seal
15 - 69 9813/4800-3 15 - 69
06 - Front Oil Seal
Remove and Install
Special Tools
Description Part No. Qty.
Crankshaft Front Oil
Seal Installation Tool
892/01157 1
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Get access to the engine.
4. Remove the drive belt, refer to (PIL 15-18).
5. Remove the crankshaft pulley, refer to (PIL
15-12-12).
Remove
1. Use a suitable lever behind the lip of the
seal, carefully prise out the oil seal from the
counterbore in the crankcase. Take care not
to scratch or damage the counterbore or the
crankshaft hub. Damaged or dirty sealing faces
will cause the oil seal to fail.
Figure 162.
C
A
B
A Crankshaft oil seal
B Crankcase
C Crankshaft hub
Install
1. Make sure that the counterbore and the
crankshaft hub are clean and free from damage
and corrosion. Use a suitable degreasing agent
to clean all traces of oil and grease from the
counterbore. Important: The oil seal has a special
coating and MUST be installed dry without
lubricant.
2. Dismantle the seal installation tool. Bolt the
centre body to the crankshaft hub, using the
bolts. Refer to Figure 163.
Special Tool: Crankshaft Front Oil Seal
Installation Tool (Qty.: 1)
3. Install the oil seal on to the centre body. Make
sure that the seal is installed the correct way
around. Assemble the outer sleeve on to the
centre body and install the screw. Refer to Figure
163.
11. 15 - Engine
12 - Crankshaft
06 - Front Oil Seal
15 - 70 9813/4800-3 15 - 70
Figure 163.
F D
G
H
B
G
F
C
A
E
A Crankshaft oil seal B Crankcase
C Crankshaft hub D Seal installation tool
E Fixing bolts (x3) F Centre body
G Outer sleeve H Screw
4. Turn the screw to push the seal squarely into
the counterbore until the outer sleeve comes
up against the front edge of the counterbore.
When correctly installed, the front face of the seal
should be flush with the edge of the counterbore
within the specified tolerance. Refer to Figure
164.
Dimension: -0.5 -0/+0.5mm
Figure 164.
B
G
F
C
A
A Crankshaft oil seal
B Crankcase
C Crankshaft hub
F Centre body
G Outer sleeve
5. Remove the seal installation tool.
12. 15 - Engine
12 - Crankshaft
06 - Front Oil Seal
15 - 71 9813/4800-3 15 - 71
After Installation
1. Install the crankshaft pulley, refer to (PIL
15-12-12).
2. Install the drive belt, refer to (PIL 15-18).
13. 15 - Engine
12 - Crankshaft
09 - Rear Oil Seal
15 - 72 9813/4800-3 15 - 72
09 - Rear Oil Seal
Remove and Install
Special Tools
Description Part No. Qty.
Crankshaft Rear Oil
Seal Installation Tool
892/01156 1
Crankshaft Rear Oil
Seal Alignment Tool
892/01158 1
Note: The flywheel hub and crankshaft rear oil seal
need to be replaced as a pair.
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Get access to the engine.
4. Remove the flywheel, refer to (PIL 15-54).
Remove
1. Use a suitable lever behind the lip of the seal
to carefully prise out the rear oil seal from the
counterbore in the flywheel housing. Take care
not to scratch or damage the counterbore or the
flywheel hub. Damaged or dirty sealing faces will
cause the oil seal to fail.
Figure 165. 24mm Hub
A
C B
A Crankshaft rear oil seal
B Flywheel housing
C Flywheel hub
Figure 166. 15mm Hub
A
C E
B
A Crankshaft rear oil seal
B Flywheel housing
C Flywheel hub
E Fixing bolt
Install (24mm Hub)
1. Make sure that the counterbore and the flywheel
hub are clean and free from damage and
corrosion.
14. 15 - Engine
12 - Crankshaft
09 - Rear Oil Seal
15 - 73 9813/4800-3 15 - 73
Figure 167.
B
A
D
D
C
A Crankshaft rear oil seal B Flywheel housing
C Flywheel hub D Oil seal alignment tool
2. To prevent the seal lip rolling over and becoming
damaged, make sure that you use the oil seal
alignment tool to initially install the oil seal on to
the flywheel hub. Locate the alignment tool over
the end of the hub, then carefully push the oil seal
over the alignment tool and on to the crankshaft
diameter. Make sure that the oil seal is installed
the correct way around.
Special Tool: Crankshaft Rear Oil Seal
Installation Tool (Qty.: 1)
Special Tool: Crankshaft Rear Oil Seal Alignment
Tool (Qty.: 1)
3. Apply lubricant P80 around the seal outer rubber
diameter.
4. Dismantle the oil seal installation tool. Bolt the
centre body to the flywheel hub, using the two
flywheel bolts. Assemble the outer sleeve on to
the centre body and install the screw.
Figure 168.
A
B
C
F
E
F
H
G
J
H
G
A Crankshaft rear oil seal B Flywheel housing
C Outer sleeve E Oil seal installation tool
F Flywheel bolts G Centre body
H Flywheel hub J Screw
5. Turn the screw to push the seal squarely into
the counterbore until the outer sleeve comes
up against the front edge of the counterbore.
When correctly installed, the front face of the seal
should be flush with the edge of the counterbore
within the tolerance specified.
Length/Dimension/Distance: 0.5mm
6. Remove the oil seal installation tool.
Install (15mm Hub)
1. Make sure that the counterbore and the hub are
clean and free from damage.
15. 15 - Engine
12 - Crankshaft
09 - Rear Oil Seal
15 - 74 9813/4800-3 15 - 74
Figure 169.
B
A
D
D
C
A Crankshaft rear oil seal B Flywheel housing
C Flywheel hub D Oil seal alignment tool
2. Install the new hub on to the crankshaft gear and
install the old hub on the outside of the new hub
to create a double thickness flywheel hub, install
the fixing bolt as shown at A. Do not touch the
PTFE seal lips of the crankshaft oil seal.
3. Make sure that you use the oil seal alignment tool
to initially install the oil seal on to the flywheel
hub to prevent damage to the seal lip. Locate the
alignment tool over the end of the hub, carefully
push the oil seal over the alignment tool as far
on to the crankshaft hub as possible. Make sure
that the seal is installed the correct way around.
Special Tool: Crankshaft Rear Oil Seal
Installation Tool (Qty.: 1)
Special Tool: Crankshaft Rear Oil Seal Alignment
Tool (Qty.: 1)
4. Apply the lubricant P80 around the seal outer
rubber diameter.
5. Dismantle the oil seal installation tool. Use the
two flywheel bolts to attach the centre body on to
the flywheel hub. Assemble the outer sleeve on
to the centre body include the extension ring and
install the screw.
Figure 170.
A
B
C1 C2
F
G
H
J
K
L
K
J
A Crankshaft rear oil seal B Flywheel housing
C1 New hub C2 Old hub
F Flywheel bolts G Oil seal installation tool
H Extension ring J Centre body
K Outer sleeve L Screw
6. Turn the screw to push the seal into position in
the counterbore so that the screw will not turn.
16. 15 - Engine
12 - Crankshaft
09 - Rear Oil Seal
15 - 75 9813/4800-3 15 - 75
7. Remove the oil seal installation tool, remove the
old hub and install the fixing bolt. Repeat steps 5
and 6 to fully install the rear oil seal.
8. Remove the oil seal installation tool.
After Installation
1. Install the flywheel, refer to (PIL 15-54).
Table 63. Torque Values
Item Nm
E 47
17. 15 - Engine
12 - Crankshaft
12 - Pulley
15 - 76 9813/4800-3 15 - 76
12 - Pulley
Remove and Install
Special Tools
Description Part No. Qty.
Torque Wrench
(10-100Nm)
993/70111 1
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Get access to the engine.
4. Remove the drive belt. Refer to (PIL 15-18).
Remove
1. Remove the fixing bolts and withdraw the pulley
from the crankshaft.
Figure 171.
A
B
A
A Crankshaft pulley
B Fixing bolts (x3)
2. The bolts must not be reused. Discard the bolts.
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Make sure that all items are clean and free from
damage and corrosion.
3. Renew the fixing bolts. Tighten the new bolts in
three stages to the correct torque value.
Special Tool: Torque Wrench (10-100Nm) (Qty.:
1)
4. The bolts are tightened using a torque and
angle method. Refer to Fasteners and Fixings,
General, Introduction (PIL 72-00).
Figure 172.
C
C Angle gauge (obtain locally)
After Replacement
1. Install the drive belt. Refer to (PIL 15-18).
Table 64.
Item Torque Value
(Nm)
Torque Angle
(Degrees)
2 (1st stage) 30N·m
2 (2nd stage) 75N·m
2 (Final stage) 180°
18. 15 - Engine
15 - Camshaft
00 - General
15 - 85 9813/4800-3 15 - 85
Remove and Install
Before Removal
1. Drain the oil from the engine. Refer to (PIL
15-21-00).
2. Disconnect and remove the fuel pipes from the
injectors. Refer to (PIL 18-96-03).
3. Remove the rocker cover. Refer to (PIL
15-42-06).
4. Remove the fuel injection pump.
5. Remove the rocker assembly and push rods.
6. Remove the starter motor. Refer to (PIL
15-75-00).
7. Remove the oil sump. Refer to (PIL 15-45-00).
8. Remove the flywheel. Refer to (PIL 15-54-00).
9. Remove the flywheel housing. Refer to (PIL
15-54-03).
10. Rotate the crankshaft until the camshaft timing
pin can be inserted through the gear and into the
aligning hole in the rear gear case.
Figure 175.
A
A Timing pin - camshaft
11. Remove the taper blanking plug and insert
the crankshaft locking pin. The camshaft and
crankshaft locking pins must be in position to lock
the crankshaft and camshaft before removing the
camshaft assembly.
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. 15 - Engine
15 - Camshaft
00 - General
15 - 86 9813/4800-3 15 - 86
Figure 176.
C
B
B Timing pin - crankshaft
C Blanking plug
12. Remove the fuel injection pump drive gear. Refer
to (PIL 15-51-09).
Remove
The engine must be inverted. DO NOT attempt
to remove the camshaft and its drive gears with
the engine upright. The tappets and push rods will
fall into the engine and further dismantling will be
required to retrieve them.
1. Remove the camshaft timing pin.
2. Carefully withdraw the camshaft and gear
assembly from the crankcase. Make sure you
fully support the camshaft to prevent the lobes
contacting the bearing surfaces in the crankcase.
The bearing surfaces can easily be damaged by
the sharp hard edges on the cam lobes.
Figure 177.
A
DD
A
A Timing pin - camshaft D Camshaft and drive gear
3. Access the tappets through the apertures in
the crankcase bedplate next to the crankshaft.
Lift out the tappets from the crankcase using a
suitable magnetic probe. Label the tappets for
replacement in their original positions.
21. 15 - Engine
15 - Camshaft
00 - General
15 - 87 9813/4800-3 15 - 87
Figure 178.
E
F
E
E Tappet (8 off)
F Magnetic probe
Inspection
1. Refer to Camshaft- Check Condition (PIL 15-15).
Install
1. Lubricate the tappets and tappet bores inside the
crankcase with clean engine oil.
2. Insert the tappets in their original positions in the
crankcase using a suitable magnetic probe.
3. Lubricate the camshaft bearing journals inside
the crankcase with clean engine oil.
4. Carefully insert the camshaft assembly into the
crankcase as shown. Support the camshaft
preventing the lobes contacting the bearing
surfaces in the crankcase. Before meshing the
camshaft gear with the crankshaft gear, rotate
the camshaft until the timing hole in the gear
aligns with the dowel hole in the gear case. Insert
the timing pin T1 to lock the camshaft in this
position.
After Installation
1. The after installation procedure is the opposite
of the before removal procedure. Additionally do
the following step.
2. Note that the fuel injection pump drive gear
fixing nut is torque tightened as part of the fuel
injection pump replacement procedure. Refer to
(PIL 18-18-15).