This service manual provides instructions for servicing the crankshaft on a backhoe loader. The crankshaft is a core component that connects the pistons to the flywheel. Key steps in servicing the crankshaft include cleaning the crankcase and bearings, checking crankshaft dimensions, installing new piston cooling jets, and carefully inserting the crankshaft while aligning the thrust washers and bearing shells. Thorough cleaning is emphasized to prevent blocked oil passages from causing engine failure.
Jcb js130 excavator service repair manual sn from 2373080 to 2375080fiskefjskemem
The document provides a service manual for excavator tracks. It includes sections on track components, measuring wear using technical data tables, adjusting tracks, removing and installing tracks, and storing tracks. Procedures are provided for measuring link rail surface wear, track pitch/internal pin and bush wear, and bush external wear to determine wear percentages and maintenance requirements.
Jcb js145 w wheeled excavator service repair manual (from 2143159 to 2143459;...fjjsjekksemm
This document provides information about servicing JCB wheeled excavators. It contains sections on the machine, attachments, body, operator station, HVAC, engine, fuel/exhaust, cooling, brakes, steering, driveline, hydraulics, and electrical systems. The section on the engine provides details on health and safety, technical data, component identification, operation, maintenance procedures, and storage for the engine. It includes diagrams labeling external and internal engine parts and describes the four-stroke operating cycle.
Jcb 3 cx compact backhoe loader service repair manual (sn from 2495456 and up)fusefjskekkmem
This service manual provides instructions for servicing a JCB 3CX Compact backhoe loader. It contains sections covering the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The specific section summarized discusses servicing procedures for the engine crankshaft, including how it is lubricated by engine oil, how to check its condition by inspecting the bearing surfaces and diameters, and ensuring the oilways are clear.
Jcb 3 cx backhoe loader service repair manual sn from 2442701 to 2451000fusefjskekkmem
This service manual section provides information on servicing the crankshaft and related components on a backhoe loader. It includes identification of parts, technical specifications, operation descriptions, removal and installation instructions, and check/inspection procedures. Proper cleaning and installation of the crankshaft oil seal is critical to prevent oil leakage. Removal and installation of the crankshaft requires carefully following all steps while ensuring components remain clean and undamaged.
Jcb 560 80 tier 4 telescopic handler service repair manual sn from 2460601 on...fusefjjskekemm
The document provides instructions for servicing fuel injectors and related components on JCB Loadall vehicles. It begins with an introduction to fuel injectors and their purpose. The main sections include checking injector operation using leak-off tests, removing and installing individual injectors, removing and installing injector seals, and removing and installing the common fuel rail assembly. Torque specifications are provided for reinstalling components.
Jcb 9 tft dumper service repair manual sn from hrm1382 to hrm4003fusefjskekkmem
This service manual provides instructions for servicing the braking system of dumpers. It contains information on health and safety when working on the brakes, technical specifications, component identification, troubleshooting, and bleeding the brakes. The braking system uses mineral oil and contains separate front and rear brake circuits for safety. Adjustment is generally not needed as the brakes are self-adjusting, but bleeding may be required if the brake lines leak fluid.
Jcb 135 skid steer loader service repair manual (from 2473501 to 2473800)fdjjsekksemxs
This service manual provides information for servicing a JCB skid steer loader engine. It contains sections on safety, maintenance, troubleshooting and repair of the engine and its systems. The manual outlines the operating principles and components of the Perkins 400 series diesel engine used in the skid steer, including descriptions of the 4-stroke combustion cycle and the function of internal engine parts. Instructions are provided for routine maintenance, inspections, and repairs.
Caterpillar cat 135 h motor grader (prefix 7mm) service repair manual (7mm000...fjjsjeskkekem
This document provides instructions for removing and installing various components of the power train system on a 135H Motor Grader, including the parking brake, tandem drive housings, drive sprockets, and final drives. It describes disconnecting transmission lines and air lines, draining transmission oil, and removing and installing various components using specialized tools while taking safety precautions. Torque specifications are provided for reinstalling components.
Jcb js130 excavator service repair manual sn from 2373080 to 2375080fiskefjskemem
The document provides a service manual for excavator tracks. It includes sections on track components, measuring wear using technical data tables, adjusting tracks, removing and installing tracks, and storing tracks. Procedures are provided for measuring link rail surface wear, track pitch/internal pin and bush wear, and bush external wear to determine wear percentages and maintenance requirements.
Jcb js145 w wheeled excavator service repair manual (from 2143159 to 2143459;...fjjsjekksemm
This document provides information about servicing JCB wheeled excavators. It contains sections on the machine, attachments, body, operator station, HVAC, engine, fuel/exhaust, cooling, brakes, steering, driveline, hydraulics, and electrical systems. The section on the engine provides details on health and safety, technical data, component identification, operation, maintenance procedures, and storage for the engine. It includes diagrams labeling external and internal engine parts and describes the four-stroke operating cycle.
Jcb 3 cx compact backhoe loader service repair manual (sn from 2495456 and up)fusefjskekkmem
This service manual provides instructions for servicing a JCB 3CX Compact backhoe loader. It contains sections covering the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The specific section summarized discusses servicing procedures for the engine crankshaft, including how it is lubricated by engine oil, how to check its condition by inspecting the bearing surfaces and diameters, and ensuring the oilways are clear.
Jcb 3 cx backhoe loader service repair manual sn from 2442701 to 2451000fusefjskekkmem
This service manual section provides information on servicing the crankshaft and related components on a backhoe loader. It includes identification of parts, technical specifications, operation descriptions, removal and installation instructions, and check/inspection procedures. Proper cleaning and installation of the crankshaft oil seal is critical to prevent oil leakage. Removal and installation of the crankshaft requires carefully following all steps while ensuring components remain clean and undamaged.
Jcb 560 80 tier 4 telescopic handler service repair manual sn from 2460601 on...fusefjjskekemm
The document provides instructions for servicing fuel injectors and related components on JCB Loadall vehicles. It begins with an introduction to fuel injectors and their purpose. The main sections include checking injector operation using leak-off tests, removing and installing individual injectors, removing and installing injector seals, and removing and installing the common fuel rail assembly. Torque specifications are provided for reinstalling components.
Jcb 9 tft dumper service repair manual sn from hrm1382 to hrm4003fusefjskekkmem
This service manual provides instructions for servicing the braking system of dumpers. It contains information on health and safety when working on the brakes, technical specifications, component identification, troubleshooting, and bleeding the brakes. The braking system uses mineral oil and contains separate front and rear brake circuits for safety. Adjustment is generally not needed as the brakes are self-adjusting, but bleeding may be required if the brake lines leak fluid.
Jcb 135 skid steer loader service repair manual (from 2473501 to 2473800)fdjjsekksemxs
This service manual provides information for servicing a JCB skid steer loader engine. It contains sections on safety, maintenance, troubleshooting and repair of the engine and its systems. The manual outlines the operating principles and components of the Perkins 400 series diesel engine used in the skid steer, including descriptions of the 4-stroke combustion cycle and the function of internal engine parts. Instructions are provided for routine maintenance, inspections, and repairs.
Caterpillar cat 135 h motor grader (prefix 7mm) service repair manual (7mm000...fjjsjeskkekem
This document provides instructions for removing and installing various components of the power train system on a 135H Motor Grader, including the parking brake, tandem drive housings, drive sprockets, and final drives. It describes disconnecting transmission lines and air lines, draining transmission oil, and removing and installing various components using specialized tools while taking safety precautions. Torque specifications are provided for reinstalling components.
Liebherr r964 c 1447 hydraulic excavator service repair manualudfjjdksekmm
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, requirements, and expected results of actions. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 1377 hydraulic excavator service repair manualudfjjdksekmm
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r960 demolition 1787 hydraulic excavator service repair manualudfjjdksekmm
This document is a service manual that covers maintenance and repair for various systems of an industrial machine. It includes sections on technical data, maintenance procedures, drive systems, cooling systems, hydraulics, electrical systems, gearboxes, and other components. The manual provides information to technicians for servicing the machine.
Liebherr r926 compact 1298 1299 hydraulic excavator service repair manualudfjjdksekmm
This document is a service manual for an MJFCIFSS machine. It includes sections on technical data, maintenance, drive groups, cooling systems, working hydraulics, electrical systems, travel gearboxes, steel parts, operator cabs and more. The document provides information to service and maintain the various components and systems of the MJFCIFSS machine. It encourages the reader to click on a link for the complete manual.
Liebherr r920 compact hydraulic excavator service repair manualudfjjdksekmm
This document is a service manual for an MJFCIFSS machine. It contains sections covering technical data, maintenance instructions, and descriptions of the drive group, cooling system, hydraulics, electrical system, travel gearbox, steel parts, operator cab, lubrication system, slewing gearbox, and diagnosis procedures. The manual is copyrighted by MJFCIFSS.
Liebherr r918 compact hydraulic excavator service repair manualudfjjdksekmm
This document is a service manual for an MJFCIFSS machine. It contains sections covering technical data, maintenance instructions, and descriptions of the drive group, cooling system, hydraulics, electrical system, travel gearbox, steel parts, operator cab, lubrication system, slewing gearbox, and diagnosis procedures. The manual is copyrighted by MJFCIFSS.
Liebherr lh50 m 1216 (tier4f) hydraulic excavator service repair manualudfjjdksekmm
This document contains figures and tables describing components of mechanical devices like differential cylinders, shock absorbers, and hydraulic cylinders. It discusses mounting of clamping nuts in different configurations and adjusting swing brakes. Tables list recommended corrosion inhibitors and paint coatings from Liebherr. The document encourages downloading a complete manual for more details.
Jcb js175 w wheeled excavator service repair manual (from 2143159 to 2143459;...udfjjdksekmm
This service manual section provides information on servicing the engine in JCB wheeled excavators. It includes identification of major engine components both internal and external. Health and safety precautions are outlined including risks from hot components and rotating parts. Technical specifications for the SL, SH and DH engine variants are listed including dimensions, valve clearances, lubrication pressures and filter type.
Jcb js160 w wheeled excavator service repair manual (from 2143159 to 2143459;...udfjjdksekmm
This service manual section provides information on servicing the engine in JCB wheeled excavators. It includes identification of major engine components both internal and external. Health and safety precautions are outlined including risks from hot components and rotating parts. Technical specifications of the engine such as bore, stroke, displacement and lubrication oil pressure parameters are provided.
Jcb js145 w wheeled excavator service repair manual (from 2143159 to 2143459;...udfjjdksekmm
This service manual section provides information on servicing the engine in JCB wheeled excavators. It includes identification of major engine components both internal and external. Health and safety precautions are outlined including risks from hot components and rotating parts. Technical specifications of the engine such as bore, stroke, displacement and lubrication oil pressure are provided.
Jcb js115 excavator service repair manual sn 2397465 and upudfjjdksekmm
The document provides service information for excavator tracks. It includes sections on track components, checking track condition, adjusting track tension, removing and installing tracks, and storing tracks. The main components of the track system are identified and diagrams are provided showing typical track installations. Technical specifications are given for track tension, pin and bush wear limits, link height wear limits, and replacement thresholds. Procedures are outlined for checking track components for wear and damage.
Jcb 540 200 telescopic handler service repair manual sn from 2460601 onwardsudfjjdksekmm
This service manual provides information on servicing the Loadall rough terrain variable reach truck. It contains instructions that were originally provided by the manufacturer and covers systems like the engine, brakes, hydraulics, and electrical systems. The manual instructs technicians to study it before operating or maintaining the machine to prevent injury or death. It also contains sections on safety, maintenance procedures, technical specifications, and the removal and installation of components.
Jcb 540 170 telescopic handler service repair manual sn from 2902000 onwardsudfjjdksekmm
This service manual provides instructions for servicing the Loadall rough terrain variable reach truck. It contains sections on the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The section summarized focuses on servicing the engine valves and connecting rod big-end bearings. It provides removal and installation instructions, component identification diagrams, and technical specifications for the valves and instructions to check the big-end bearings for wear.
Jcb 536 60 tier 4 telescopic handler service repair manual sn from 2336575 on...udfjjdksekmm
This document provides service and repair instructions for fuel injectors on JCB Loadall vehicles. It begins with an introduction to the injector components and operation. The main sections provide procedures for checking injector operation with diagnostic tools, removing and installing individual injectors, and removing and installing injector seals in the cylinder head. The summary highlights that the document contains procedures for servicing fuel injectors, including checking operation, removing and installing individual injectors, and removing and installing injector seals.
Jcb 535 95 tier 4 telescopic handler service repair manual sn from 2902000 on...udfjjdksekmm
This document provides service and repair instructions for fuel injectors on JCB Loadall vehicles. It describes injector components and identification, includes a check procedure using diagnostic tools, and outlines removal and installation steps. Special tools are required for tasks like leak testing and installing injector seals. Torque specifications are provided for reinstalling injectors and seals.
Jcb 411 ht, 413s, 417ht wheel loader service repair manual from 2094871 to 20...udfjjdksekmm
This service manual provides instructions for servicing JCB machines 411HT, 413S, and 417HT. It contains sections on various machine systems including the engine, fuel and exhaust systems, cooling system, brake system, hydraulic system, and electrical system. The section on the fuel and exhaust system includes subsections that provide introductions, component identifications, check procedures, and removal/installation steps for the inlet manifold, outlet manifold, and general exhaust system components. Safety precautions are outlined regarding working with hot or hazardous exhaust components.
Jcb 250 t skid steer loader service repair manual sn from 2478301 to 2478700udfjjdksekmm
This service manual provides instructions for servicing skid steer loaders and their engines. It details removing and installing the engine bedplate, which acts as the main strength component and maintains alignment of internal engine parts. The multi-step procedure requires cleaning parts, applying sealant, installing bearing shells and bolts, and torquing bolts to specified values. Special tools like templates and torque wrenches are needed to correctly complete the process.
Jcb 250 t skid steer loader service repair manual sn from 2476302 to 2477300udfjjdksekmm
This service manual provides instructions for servicing JCB skid steer loaders and their components. It contains sections on machine overview, attachments, body/framework, operator station, HVAC, engine, fuel/exhaust, cooling, brakes, driveline, hydraulics, and electrical systems. The section summarized focuses on servicing the engine crankshaft, including removal/installation instructions and specifications. Technicians are advised to follow all safety procedures, use the proper tools, and replace worn parts.
Jcb 9 tst dumper service repair manual sn from grs1346 to grs9572udfjjdksekmm
This service manual provides instructions for servicing the components of a dumper vehicle, including the machine body and framework, operator station, engine, fuel and exhaust system, cooling system, brake system, steering system, driveline, hydraulic system, electrical system, fasteners and fixings, and consumable products. The document provides detailed removal and installation instructions for fuel system components like high pressure fuel pipes, low pressure fuel pipes, and injector bleed-off pipes. Safety precautions for working on the fuel system are emphasized.
Jcb 9 tst dumper service repair manual sn from grp0854 to grp1363udfjjdksekmm
This service manual provides instructions for servicing the braking system of dumpers. It contains information on health and safety when working on the brakes, technical specifications, component identification, troubleshooting, and bleeding the brakes. The braking system uses mineral oil and contains separate front and rear brake circuits for safety. Adjustment is generally not needed as the brakes are self-adjusting, but bleeding may be required if the brake lines leak fluid.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Liebherr r964 c 1447 hydraulic excavator service repair manualudfjjdksekmm
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, requirements, and expected results of actions. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 1377 hydraulic excavator service repair manualudfjjdksekmm
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r960 demolition 1787 hydraulic excavator service repair manualudfjjdksekmm
This document is a service manual that covers maintenance and repair for various systems of an industrial machine. It includes sections on technical data, maintenance procedures, drive systems, cooling systems, hydraulics, electrical systems, gearboxes, and other components. The manual provides information to technicians for servicing the machine.
Liebherr r926 compact 1298 1299 hydraulic excavator service repair manualudfjjdksekmm
This document is a service manual for an MJFCIFSS machine. It includes sections on technical data, maintenance, drive groups, cooling systems, working hydraulics, electrical systems, travel gearboxes, steel parts, operator cabs and more. The document provides information to service and maintain the various components and systems of the MJFCIFSS machine. It encourages the reader to click on a link for the complete manual.
Liebherr r920 compact hydraulic excavator service repair manualudfjjdksekmm
This document is a service manual for an MJFCIFSS machine. It contains sections covering technical data, maintenance instructions, and descriptions of the drive group, cooling system, hydraulics, electrical system, travel gearbox, steel parts, operator cab, lubrication system, slewing gearbox, and diagnosis procedures. The manual is copyrighted by MJFCIFSS.
Liebherr r918 compact hydraulic excavator service repair manualudfjjdksekmm
This document is a service manual for an MJFCIFSS machine. It contains sections covering technical data, maintenance instructions, and descriptions of the drive group, cooling system, hydraulics, electrical system, travel gearbox, steel parts, operator cab, lubrication system, slewing gearbox, and diagnosis procedures. The manual is copyrighted by MJFCIFSS.
Liebherr lh50 m 1216 (tier4f) hydraulic excavator service repair manualudfjjdksekmm
This document contains figures and tables describing components of mechanical devices like differential cylinders, shock absorbers, and hydraulic cylinders. It discusses mounting of clamping nuts in different configurations and adjusting swing brakes. Tables list recommended corrosion inhibitors and paint coatings from Liebherr. The document encourages downloading a complete manual for more details.
Jcb js175 w wheeled excavator service repair manual (from 2143159 to 2143459;...udfjjdksekmm
This service manual section provides information on servicing the engine in JCB wheeled excavators. It includes identification of major engine components both internal and external. Health and safety precautions are outlined including risks from hot components and rotating parts. Technical specifications for the SL, SH and DH engine variants are listed including dimensions, valve clearances, lubrication pressures and filter type.
Jcb js160 w wheeled excavator service repair manual (from 2143159 to 2143459;...udfjjdksekmm
This service manual section provides information on servicing the engine in JCB wheeled excavators. It includes identification of major engine components both internal and external. Health and safety precautions are outlined including risks from hot components and rotating parts. Technical specifications of the engine such as bore, stroke, displacement and lubrication oil pressure parameters are provided.
Jcb js145 w wheeled excavator service repair manual (from 2143159 to 2143459;...udfjjdksekmm
This service manual section provides information on servicing the engine in JCB wheeled excavators. It includes identification of major engine components both internal and external. Health and safety precautions are outlined including risks from hot components and rotating parts. Technical specifications of the engine such as bore, stroke, displacement and lubrication oil pressure are provided.
Jcb js115 excavator service repair manual sn 2397465 and upudfjjdksekmm
The document provides service information for excavator tracks. It includes sections on track components, checking track condition, adjusting track tension, removing and installing tracks, and storing tracks. The main components of the track system are identified and diagrams are provided showing typical track installations. Technical specifications are given for track tension, pin and bush wear limits, link height wear limits, and replacement thresholds. Procedures are outlined for checking track components for wear and damage.
Jcb 540 200 telescopic handler service repair manual sn from 2460601 onwardsudfjjdksekmm
This service manual provides information on servicing the Loadall rough terrain variable reach truck. It contains instructions that were originally provided by the manufacturer and covers systems like the engine, brakes, hydraulics, and electrical systems. The manual instructs technicians to study it before operating or maintaining the machine to prevent injury or death. It also contains sections on safety, maintenance procedures, technical specifications, and the removal and installation of components.
Jcb 540 170 telescopic handler service repair manual sn from 2902000 onwardsudfjjdksekmm
This service manual provides instructions for servicing the Loadall rough terrain variable reach truck. It contains sections on the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The section summarized focuses on servicing the engine valves and connecting rod big-end bearings. It provides removal and installation instructions, component identification diagrams, and technical specifications for the valves and instructions to check the big-end bearings for wear.
Jcb 536 60 tier 4 telescopic handler service repair manual sn from 2336575 on...udfjjdksekmm
This document provides service and repair instructions for fuel injectors on JCB Loadall vehicles. It begins with an introduction to the injector components and operation. The main sections provide procedures for checking injector operation with diagnostic tools, removing and installing individual injectors, and removing and installing injector seals in the cylinder head. The summary highlights that the document contains procedures for servicing fuel injectors, including checking operation, removing and installing individual injectors, and removing and installing injector seals.
Jcb 535 95 tier 4 telescopic handler service repair manual sn from 2902000 on...udfjjdksekmm
This document provides service and repair instructions for fuel injectors on JCB Loadall vehicles. It describes injector components and identification, includes a check procedure using diagnostic tools, and outlines removal and installation steps. Special tools are required for tasks like leak testing and installing injector seals. Torque specifications are provided for reinstalling injectors and seals.
Jcb 411 ht, 413s, 417ht wheel loader service repair manual from 2094871 to 20...udfjjdksekmm
This service manual provides instructions for servicing JCB machines 411HT, 413S, and 417HT. It contains sections on various machine systems including the engine, fuel and exhaust systems, cooling system, brake system, hydraulic system, and electrical system. The section on the fuel and exhaust system includes subsections that provide introductions, component identifications, check procedures, and removal/installation steps for the inlet manifold, outlet manifold, and general exhaust system components. Safety precautions are outlined regarding working with hot or hazardous exhaust components.
Jcb 250 t skid steer loader service repair manual sn from 2478301 to 2478700udfjjdksekmm
This service manual provides instructions for servicing skid steer loaders and their engines. It details removing and installing the engine bedplate, which acts as the main strength component and maintains alignment of internal engine parts. The multi-step procedure requires cleaning parts, applying sealant, installing bearing shells and bolts, and torquing bolts to specified values. Special tools like templates and torque wrenches are needed to correctly complete the process.
Jcb 250 t skid steer loader service repair manual sn from 2476302 to 2477300udfjjdksekmm
This service manual provides instructions for servicing JCB skid steer loaders and their components. It contains sections on machine overview, attachments, body/framework, operator station, HVAC, engine, fuel/exhaust, cooling, brakes, driveline, hydraulics, and electrical systems. The section summarized focuses on servicing the engine crankshaft, including removal/installation instructions and specifications. Technicians are advised to follow all safety procedures, use the proper tools, and replace worn parts.
Jcb 9 tst dumper service repair manual sn from grs1346 to grs9572udfjjdksekmm
This service manual provides instructions for servicing the components of a dumper vehicle, including the machine body and framework, operator station, engine, fuel and exhaust system, cooling system, brake system, steering system, driveline, hydraulic system, electrical system, fasteners and fixings, and consumable products. The document provides detailed removal and installation instructions for fuel system components like high pressure fuel pipes, low pressure fuel pipes, and injector bleed-off pipes. Safety precautions for working on the fuel system are emphasized.
Jcb 9 tst dumper service repair manual sn from grp0854 to grp1363udfjjdksekmm
This service manual provides instructions for servicing the braking system of dumpers. It contains information on health and safety when working on the brakes, technical specifications, component identification, troubleshooting, and bleeding the brakes. The braking system uses mineral oil and contains separate front and rear brake circuits for safety. Adjustment is generally not needed as the brakes are self-adjusting, but bleeding may be required if the brake lines leak fluid.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
2. 15 - Engine
12 - Crankshaft
00 - General
15 - 73 9813/6900-6 15 - 73
00 - General
Introduction .................................................... 15-73
Technical Data ............................................... 15-74
Component Identification ............................... 15-75
Operation ....................................................... 15-76
Check (Condition) .......................................... 15-77
Remove and Install ....................................... 15-78
Introduction
Figure 285.
B
A
A Crankcase
B Crankshaft
3. 15 - Engine
12 - Crankshaft
00 - General
15 - 74 9813/6900-6 15 - 74
Technical Data
Table 100.
Main bearing journal diameter (x4)
- min 87.98mm
- max 88mm
Main rear bearing journal diameter (x1)
- min 99.98mm
- max 100mm
Connecting rod bearing journal diameter
- min 72.98mm
- max 73mm
Maximum wear and ovality on journals
(1)
Crankshaft induction hardness 55 HRc min on surface
Thrust washer width
- min 2.44mm
- max 2.5mm
Crankshaft end float
- min 0.05mm
- max 0.28mm
(1) No visible damage/wear or marks
4. 15 - Engine
12 - Crankshaft
00 - General
15 - 75 9813/6900-6 15 - 75
Component Identification
Figure 286.
B
A
A Crankcase
B Crankshaft
5. 15 - Engine
12 - Crankshaft
00 - General
15 - 76 9813/6900-6 15 - 76
Operation
Lubrication
Oil is fed from the main gallery via five drillings, one
to each of the main bearings. A groove around the
diameter of the upper main bearing shell allows oil
transfer to cross drillings in the crankshaft to feed
each of the big end bearings. Crankshaft gear is
'splash' lubricated. Front and rear crankshaft oil seals
prevent oil leakage from, and dirt ingress to, the
engine.
Figure 287.
1 Main gallery 2 Drillings (x5)
3 Main bearings 4 Big end bearings
5 Cross drillings 6 Crankshaft gear
7 Crankshaft oil seal 8 Crankshaft oil seal
6. 15 - Engine
12 - Crankshaft
00 - General
15 - 77 9813/6900-6 15 - 77
Check (Condition)
1. Check the main bearing surfaces for damage and
excessive wear.
Figure 288.
A
A Main bearing shells
2. Measure the crankshaft diameters to confirm
they are within service limits, refer to Technical
Data (PIL 15-12).
Figure 289.
B
B Crankshaft
3. Check that the oil-way cross drillings in the
crankshaft are clear and free from debris.
Blocked or restricted oil-ways will cause oil
starvation at the big end bearings.
4. Check that the piston cooling J-jets are clear. If
the J-jets cannot be cleared remove the fixing
screws. Remove theJ-jets and discard them.
5. Install new J-jets.
Figure 290.
D
C
C J-jets
D Fixing screws
7. 15 - Engine
12 - Crankshaft
00 - General
15 - 78 9813/6900-6 15 - 78
Remove and Install
Consumables
Description Part No. Size
Cleaner/Degreaser
- General purpose
solvent based parts
cleaner
4104/1557 0.4 L
CAUTION This component is heavy. It must only
be removed or handled using a suitable lifting
method and device.
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Remove the engine, refer to (PIL 15-00).
4. Remove the drive belt, refer to (PIL 15-18).
5. Remove the crankshaft pulley, refer to (PIL
15-12).
6. Remove the oil sump, refer to (PIL 15-45).
7. Disconnect and remove the fuel pipes from the
injectors, refer to (PIL 18-96).
8. Remove the rocker cover, refer to (PIL 15-42).
9. Remove the fuel injectors, refer to (PIL 18-18).
10. Remove the rocker assembly including the push
rods, refer to (PIL 15-42).
11. It is not necessary to remove the cylinder head
assembly to remove the crankshaft. If however
the cylinder head needs to be removed for other
reasons (for piston and connecting rod removal
for example) remove it now, refer to (PIL 15-06).
12. Remove the fuel injection pump, refer to (PIL
18-18).
13. Remove the starter motor, refer to (PIL 15-75).
14. Remove the high duty PTO device (if installed).
15. Position the engine upside down in a suitable jig
or fixture, supported at the front of the cylinder
block.
16. Remove the flywheel, refer to (PIL 15-54).
17. Remove the flywheel housing, refer to (PIL
15-54).
18. Remove the fuel injection pump drive gear, refer
to (PIL 15-51).
19. Remove the oil pump, refer to (PIL 15-60).
20. Remove the high duty PTO idler drive gear (if
installed), refer to (PIL 15-51).
21. Remove the crankshaft drive gear, refer to (PIL
15-51).
22. Remove the camshaft, refer to (PIL 15-15).
23. Remove the rear timing case, refer to (PIL
15-51).
24. If the pistons and connecting rods have not been
removed, undo and remove the main bearing
caps, refer to (PIL 15-12).
25. Remove the bedplate, refer to (PIL 15-09).
Remove
1. Remove the thrust washers between the
crankshaft and crankcase rear main bearing.
8. 15 - Engine
12 - Crankshaft
00 - General
15 - 79 9813/6900-6 15 - 79
Figure 291.
C
B
A
A
A Thrust Washers B Crankshaft
C Rear main bearing
2. Put labels on the thrust washers to make sure
that they are installed in the correct positions
during assembly.
3. Use suitable lifting equipment to carefully lift the
crankshaft from the crankcase (if the crankshaft
is lifted manually, two people will be required).
4. Carefully lift out the bearing shells.
Figure 292.
D
D Main bearing shells
5. It is recommended that the bearing shells are
replaced. If however they are to be used again,
put label on the shells to make sure that they
are installed in their original positions during
assembly.
6. Inspect the crankshaft and main bearings etc.
for damage and excessive wear. Refer to Check
Condition (PIL 15-12).
Before Installation
1. Clean off all traces of the old sealant compound
from the crankcase and bedplate mating faces.
2. Use a suitable degreasing agent to carefully
clean the main bearing saddles in the bedplate
and crankcase. Take care not to block the oil
ways or the piston cooling jets.
Consumable: Cleaner/Degreaser - General
purpose solvent based parts cleaner
Important: Cleanliness is of the utmost importance.
Blocked oil-ways or oil jets will cause engine failure.
Before you install the crankshaft make sure that ALL
oil-ways and jets are clear and free from debris.
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Make sure that all items are clean and free from
damage and corrosion.
3. If removed or a new crankcase is being installed
then install cooling J jets as follows:
9. 15 - Engine
12 - Crankshaft
00 - General
15 - 80 9813/6900-6 15 - 80
Figure 293.
F
E
E J jets (x4)
F Fixing screws
3.1. Insert the cooling jets into the crankcase.
3.2. Note: There are different types of cooling
jets installed depending on the engine
application. The jets are colour coded.
3.3. Be sure to install the correct jets. Refer to
the relevant parts catalogue for the correct
cooling jet identification.
3.4. Tighten the retaining screws to the correct
torque value.
4. Install the upper bearing shells as follows:
Figure 294.
D
G
D Main bearing shells
G Bearing location tab
4.1. Use a suitable degreasing agent to make
sure that the surface of the upper bearing
shells are clean.
Consumable: Cleaner/Degreaser - General
purpose solvent based parts cleaner
4.2. Assemble the bearing shells into the
crankcase bearing saddles. Make sure that
the location tab engages into the slot as
shown.
4.3. Important: Make sure that the oil-way holes
in the bearing saddles align with the holes
in the bearing shell. If the holes are even
partially misaligned the piston cooling oil jet
will be restricted, causing the engine to fail.
4.4. Lubricate the upper bearing shells with
clean engine oil.
5. Use suitable lifting equipment (if the crankshaft
is lifted manually, two people will be required), to
carefully lower the crankshaft into the crankcase.
DO NOT rotate the crankshaft, the bearing shells
can become dislodged, refer to step 4.
6. Install the thrust washers as follows:
10. 15 - Engine
12 - Crankshaft
00 - General
15 - 81 9813/6900-6 15 - 81
Figure 295.
C
B
A
A
A
H
A Thrust washers B Crankshaft
C Rear main bearing H Oil slot - thrust washers
6.1. Slide the thrust washers between the
crankshaft and the crankcase rear main
bearing.
6.2. Make sure that they are installed in the
correct positions, with the two slots facing
outwards from the bearing saddle.
6.3. If necessary, push the crankshaft forward
and then backwards to obtain clearance to
install the thrust washers.
6.4. DO NOT rotate the crankshaft, the bearing
shells can become dislodged, refer to step
4.
7. Check that the crankshaft end float is within
service limits, refer to Technical Data (PIL 15-12).
Table 101. Torque Values
Item Nm
F 24
11. 15 - Engine
12 - Crankshaft
03 - Main Bearing
15 - 82 9813/6900-6 15 - 82
03 - Main Bearing
Introduction .................................................... 15-82
Check (Condition) .......................................... 15-83
Remove and Install ....................................... 15-83
Introduction
In a piston engine, the main bearings are the
bearings on which the crankshaft rotates.
The bearings hold the crankshaft in place and
prevent the forces created by the piston and
transmitted to the crankshaft by the connecting rods
from dislodging the crankshaft, instead forcing the
crank to convert the reciprocating movement into
rotation.
Figure 296.
A
B
A Main bearing
B Crankshaft
12. 15 - Engine
12 - Crankshaft
03 - Main Bearing
15 - 83 9813/6900-6 15 - 83
Check (Condition)
1. Check the bearing shell surfaces for signs of
damage and excessive wear.
2. Measure the crank pin diameters to confirm they
are within service limits.
Refer to: PIL 15-12-00.
3. Renew any parts that are worn or not within the
specified tolerances.
Remove and Install
Refer to: PIL 15-12-00.
13. 15 - Engine
12 - Crankshaft
06 - Front Oil Seal
15 - 84 9813/6900-6 15 - 84
06 - Front Oil Seal
Remove and Install
Special Tools
Description Part No. Qty.
Crankshaft Front Oil
Seal Installation Tool
892/01157 1
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Get access to the engine.
4. Remove the drive belt, refer to (PIL 15-18).
5. Remove the crankshaft pulley, refer to (PIL
15-12-12).
Remove
1. Use a suitable lever behind the lip of the
seal, carefully prise out the oil seal from the
counterbore in the crankcase. Take care not
to scratch or damage the counterbore or the
crankshaft hub. Damaged or dirty sealing faces
will cause the oil seal to fail.
Figure 297.
C
A
B
A Crankshaft oil seal
B Crankcase
C Crankshaft hub
Install
1. Make sure that the counterbore and the
crankshaft hub are clean and free from damage
and corrosion. Use a suitable degreasing agent
to clean all traces of oil and grease from the
counterbore. Important: The oil seal has a special
coating and MUST be installed dry without
lubricant.
2. Dismantle the seal installation tool. Bolt the
centre body to the crankshaft hub, using the
bolts. Refer to Figure 298.
Special Tool: Crankshaft Front Oil Seal
Installation Tool (Qty.: 1)
3. Install the oil seal on to the centre body. Make
sure that the seal is installed the correct way
around. Assemble the outer sleeve on to the
centre body and install the screw. Refer to Figure
298.
14. 15 - Engine
12 - Crankshaft
06 - Front Oil Seal
15 - 85 9813/6900-6 15 - 85
Figure 298.
F D
G
H
B
G
F
C
A
E
A Crankshaft oil seal B Crankcase
C Crankshaft hub D Seal installation tool
E Fixing bolts (x3) F Centre body
G Outer sleeve H Screw
4. Turn the screw to push the seal squarely into
the counterbore until the outer sleeve comes
up against the front edge of the counterbore.
When correctly installed, the front face of the seal
should be flush with the edge of the counterbore
within the specified tolerance. Refer to Figure
299.
Dimension: -0.5 -0/+0.5mm
Figure 299.
B
G
F
C
A
A Crankshaft oil seal
B Crankcase
C Crankshaft hub
F Centre body
G Outer sleeve
5. Remove the seal installation tool.
15. 15 - Engine
12 - Crankshaft
06 - Front Oil Seal
15 - 86 9813/6900-6 15 - 86
After Installation
1. Install the crankshaft pulley, refer to (PIL
15-12-12).
2. Install the drive belt, refer to (PIL 15-18).
16. 15 - Engine
12 - Crankshaft
09 - Rear Oil Seal
15 - 87 9813/6900-6 15 - 87
09 - Rear Oil Seal
Remove and Install
Special Tools
Description Part No. Qty.
Crankshaft Rear Oil
Seal Installation Tool
892/01156 1
Crankshaft Rear Oil
Seal Alignment Tool
892/01158 1
Note: The flywheel hub and crankshaft rear oil seal
need to be replaced as a pair.
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Get access to the engine.
4. Remove the flywheel, refer to (PIL 15-54).
Remove
1. Use a suitable lever behind the lip of the seal
to carefully prise out the rear oil seal from the
counterbore in the flywheel housing. Take care
not to scratch or damage the counterbore or the
flywheel hub. Damaged or dirty sealing faces will
cause the oil seal to fail.
Figure 300. 24mm Hub
A
C B
A Crankshaft rear oil seal
B Flywheel housing
C Flywheel hub
Figure 301. 15mm Hub
A
C E
B
A Crankshaft rear oil seal
B Flywheel housing
C Flywheel hub
E Fixing bolt
Install (24mm Hub)
1. Make sure that the counterbore and the flywheel
hub are clean and free from damage and
corrosion.
17. 15 - Engine
12 - Crankshaft
09 - Rear Oil Seal
15 - 88 9813/6900-6 15 - 88
Figure 302.
B
A
D
D
C
A Crankshaft rear oil seal B Flywheel housing
C Flywheel hub D Oil seal alignment tool
2. To prevent the seal lip rolling over and becoming
damaged, make sure that you use the oil seal
alignment tool to initially install the oil seal on to
the flywheel hub. Locate the alignment tool over
the end of the hub, then carefully push the oil seal
over the alignment tool and on to the crankshaft
diameter. Make sure that the oil seal is installed
the correct way around.
Special Tool: Crankshaft Rear Oil Seal
Installation Tool (Qty.: 1)
Special Tool: Crankshaft Rear Oil Seal Alignment
Tool (Qty.: 1)
3. Apply lubricant P80 around the seal outer rubber
diameter.
4. Dismantle the oil seal installation tool. Bolt the
centre body to the flywheel hub, using the two
flywheel bolts. Assemble the outer sleeve on to
the centre body and install the screw.
Figure 303.
A
B
C
F
E
F
H
G
J
H
G
A Crankshaft rear oil seal B Flywheel housing
C Outer sleeve E Oil seal installation tool
F Flywheel bolts G Centre body
H Flywheel hub J Screw
5. Turn the screw to push the seal squarely into
the counterbore until the outer sleeve comes
up against the front edge of the counterbore.
When correctly installed, the front face of the seal
should be flush with the edge of the counterbore
within the tolerance specified.
Length/Dimension/Distance: 0.5mm
6. Remove the oil seal installation tool.
Install (15mm Hub)
1. Make sure that the counterbore and the hub are
clean and free from damage.
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. 15 - Engine
12 - Crankshaft
09 - Rear Oil Seal
15 - 89 9813/6900-6 15 - 89
Figure 304.
B
A
D
D
C
A Crankshaft rear oil seal B Flywheel housing
C Flywheel hub D Oil seal alignment tool
2. Install the new hub on to the crankshaft gear and
install the old hub on the outside of the new hub
to create a double thickness flywheel hub, install
the fixing bolt as shown at A. Do not touch the
PTFE seal lips of the crankshaft oil seal.
3. Make sure that you use the oil seal alignment tool
to initially install the oil seal on to the flywheel
hub to prevent damage to the seal lip. Locate the
alignment tool over the end of the hub, carefully
push the oil seal over the alignment tool as far
on to the crankshaft hub as possible. Make sure
that the seal is installed the correct way around.
Special Tool: Crankshaft Rear Oil Seal
Installation Tool (Qty.: 1)
Special Tool: Crankshaft Rear Oil Seal Alignment
Tool (Qty.: 1)
4. Apply the lubricant P80 around the seal outer
rubber diameter.
5. Dismantle the oil seal installation tool. Use the
two flywheel bolts to attach the centre body on to
the flywheel hub. Assemble the outer sleeve on
to the centre body include the extension ring and
install the screw.
Figure 305.
A
B
C1 C2
F
G
H
J
K
L
K
J
A Crankshaft rear oil seal B Flywheel housing
C1 New hub C2 Old hub
F Flywheel bolts G Oil seal installation tool
H Extension ring J Centre body
K Outer sleeve L Screw
6. Turn the screw to push the seal into position in
the counterbore so that the screw will not turn.
20. 15 - Engine
12 - Crankshaft
09 - Rear Oil Seal
15 - 90 9813/6900-6 15 - 90
7. Remove the oil seal installation tool, remove the
old hub and install the fixing bolt. Repeat steps 5
and 6 to fully install the rear oil seal.
8. Remove the oil seal installation tool.
After Installation
1. Install the flywheel, refer to (PIL 15-54).
Table 102. Torque Values
Item Nm
E 47
21. 15 - Engine
12 - Crankshaft
12 - Pulley
15 - 91 9813/6900-6 15 - 91
12 - Pulley
Remove and Install
Special Tools
Description Part No. Qty.
Torque Wrench
(10-100Nm)
993/70111 1
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Get access to the engine.
4. Remove the drive belt. Refer to (PIL 15-18).
Remove
1. Remove the fixing bolts and withdraw the pulley
from the crankshaft.
Figure 306.
A
B
A
A Crankshaft pulley
B Fixing bolts (x3)
2. The bolts must not be reused. Discard the bolts.
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Make sure that all items are clean and free from
damage and corrosion.
3. Renew the fixing bolts. Tighten the new bolts in
three stages to the correct torque value.
Special Tool: Torque Wrench (10-100Nm) (Qty.:
1)
4. The bolts are tightened using a torque and
angle method. Refer to Fasteners and Fixings,
General, Introduction (PIL 72-00).
Figure 307.
C
C Angle gauge (obtain locally)
After Replacement
1. Install the drive belt. Refer to (PIL 15-18).
Table 103.
Item Torque Value
(Nm)
Torque Angle
(Degrees)
2 (1st stage) 30N·m
2 (2nd stage) 75N·m
2 (Final stage) 180°