This service manual provides instructions for servicing skid steer loaders and their engines. It details removing and installing the engine bedplate, which acts as the main strength component and maintains alignment of internal engine parts. The multi-step procedure requires cleaning and applying sealant to the bedplate and crankcase mating surfaces, installing bearing shells and bolts, and torquing bolts to specified values. Special tools like templates and torque wrenches are needed to correctly complete the installation.
Yale (j813) glp45 svx5 lift truck service repair manualfjjsjeskkekem
This document provides specifications for GLP/GDP40-55VX lift truck models including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Fuel tank capacities of 79-100.3 liters for various engine options
- Transmission oil specifications and relief pressures for 1-speed and 2-speed transmissions
- Hydraulic system relief pressures for primary and secondary circuits
- Steering relief pressure specifications
- Stall speed ranges for various engine and transmission combinations
Yale (f807) erp040 th lift truck service repair manualfjjsjeskkekem
This document provides a summary of the service manual contents for an ERP030-040TH lift truck. It lists the major system sections covered in the manual, including the frame, motors, transaxle, steering, brakes, hydraulics, controls, mast, and general information. For each section, it provides the part number, section number, reference manual number, and revision date. The document then provides an overview of the frame components and covers/plates that give access to internal systems during service.
Yale (e878) gp155 vx lift truck service repair manualfjjsjeskkekem
This document provides instructions for removing the operator cab from various lift truck models. The steps include tilting the steering column, sliding the seat forward, opening doors and windows, disconnecting battery cables, removing radiator caps, disconnecting air and heater hoses, extracting refrigerant from air conditioning systems, removing door assemblies, and disconnecting electrical connections. Removing the cab is a multi-step process that requires disconnecting various cab components from the engine, frame, and other systems.
Yale (e876) gdp210 dc lift truck service repair manualfjjsjeskkekem
The document provides instructions for raising and lowering the operator cab on a lift truck, as well as removing and installing the cab door. Key steps include:
1. Using the cab tilt hand pump or electric pump to raise or lower the cab until it locks in position.
2. Pulling the tilt latch release to fully raise or lower the cab.
3. Attaching lift straps and cushions to safely remove the cab door from its hinges and place it on the ground.
4. Reinstalling the cab door by lifting it back into position on the hinges and adjusting if needed.
Toyota 30 7 fbcu45 forklift service repair manualfjjsjeskkekem
This manual provides specifications, maintenance, repair, diagnostic and service procedures for Toyota electric powered forklifts models 7FBCU15 to 7FBCU55 from July 2001. It covers the chassis, body, electrical controls, and material handling system of these forklift models. The manual is organized by section with topics including general information, battery, multi-display functions, troubleshooting, motor, drive unit, front axle, rear axle, steering, brake, body, and material handling system.
Perkins peregrine edi and 1300 series edi wk diesel engine service repair manualfjjsjeskkekem
This document is a workshop manual for Perkins Peregrine EDi and 1300 Series EDi diesel engines. It provides information on engine components, specifications, maintenance procedures, and fault diagnosis. The manual contains chapters covering the cylinder head assembly, piston and connecting rod assemblies, crankshaft assembly, timing case and drive assembly, cylinder block assembly, engine timing, turbocharger, lubrication system, fuel system, cooling system, flywheel and housing, electrical equipment, auxiliary equipment, and special tools. Each chapter provides detailed descriptions and step-by-step instructions for removing, inspecting, and installing engine components and performing maintenance and repair work.
Yale (j813) glp45 svx5 lift truck service repair manualfjjsjeskkekem
This document provides specifications for GLP/GDP40-55VX lift truck models including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Fuel tank capacities of 79-100.3 liters for various engine options
- Transmission oil specifications and relief pressures for 1-speed and 2-speed transmissions
- Hydraulic system relief pressures for primary and secondary circuits
- Steering relief pressure specifications
- Stall speed ranges for various engine and transmission combinations
Yale (f807) erp040 th lift truck service repair manualfjjsjeskkekem
This document provides a summary of the service manual contents for an ERP030-040TH lift truck. It lists the major system sections covered in the manual, including the frame, motors, transaxle, steering, brakes, hydraulics, controls, mast, and general information. For each section, it provides the part number, section number, reference manual number, and revision date. The document then provides an overview of the frame components and covers/plates that give access to internal systems during service.
Yale (e878) gp155 vx lift truck service repair manualfjjsjeskkekem
This document provides instructions for removing the operator cab from various lift truck models. The steps include tilting the steering column, sliding the seat forward, opening doors and windows, disconnecting battery cables, removing radiator caps, disconnecting air and heater hoses, extracting refrigerant from air conditioning systems, removing door assemblies, and disconnecting electrical connections. Removing the cab is a multi-step process that requires disconnecting various cab components from the engine, frame, and other systems.
Yale (e876) gdp210 dc lift truck service repair manualfjjsjeskkekem
The document provides instructions for raising and lowering the operator cab on a lift truck, as well as removing and installing the cab door. Key steps include:
1. Using the cab tilt hand pump or electric pump to raise or lower the cab until it locks in position.
2. Pulling the tilt latch release to fully raise or lower the cab.
3. Attaching lift straps and cushions to safely remove the cab door from its hinges and place it on the ground.
4. Reinstalling the cab door by lifting it back into position on the hinges and adjusting if needed.
Toyota 30 7 fbcu45 forklift service repair manualfjjsjeskkekem
This manual provides specifications, maintenance, repair, diagnostic and service procedures for Toyota electric powered forklifts models 7FBCU15 to 7FBCU55 from July 2001. It covers the chassis, body, electrical controls, and material handling system of these forklift models. The manual is organized by section with topics including general information, battery, multi-display functions, troubleshooting, motor, drive unit, front axle, rear axle, steering, brake, body, and material handling system.
Perkins peregrine edi and 1300 series edi wk diesel engine service repair manualfjjsjeskkekem
This document is a workshop manual for Perkins Peregrine EDi and 1300 Series EDi diesel engines. It provides information on engine components, specifications, maintenance procedures, and fault diagnosis. The manual contains chapters covering the cylinder head assembly, piston and connecting rod assemblies, crankshaft assembly, timing case and drive assembly, cylinder block assembly, engine timing, turbocharger, lubrication system, fuel system, cooling system, flywheel and housing, electrical equipment, auxiliary equipment, and special tools. Each chapter provides detailed descriptions and step-by-step instructions for removing, inspecting, and installing engine components and performing maintenance and repair work.
New holland we190 wheel loader service repair manualfjjsjeskkekem
This service manual provides information on wheeled excavators including the WE190, WE210, WE230, WE210 Industrial, and WE230 Industrial models. It covers technical specifications, maintenance procedures, and troubleshooting for the upper structure, undercarriage, front attachment, hydraulic and electrical systems. The manual contains diagrams and specifications for components such as the boom, undercarriage, hydraulic pumps and valves, electrical systems, and electronics.
New holland l220 skid steer loader service repair manualfjjsjeskkekem
This document is a service manual for New Holland 200 Series Skid Steer Loaders and Compact Track Loaders. It provides information on the hydraulic, pneumatic, electrical, electronic and other systems of these machines. The manual is divided into sections covering topics such as the primary and secondary hydraulic systems, electrical power system, engine components, transmission, axles, brakes, steering, frame, safety features and more. Torque specifications are provided for metric hardware.
New holland b110 btc backhoe loader service repair manualfjjsjeskkekem
This document contains service manuals for various backhoe loader models. It includes sections on safety, maintenance, technical specifications, troubleshooting, and repair procedures for components like the transmission, axles, brakes, hydraulic system, and more. The document provides detailed information on maintaining and repairing the different systems of backhoe loaders.
Liebherr rl 22 b rl22b pipe layer service repair manualfjjsjeskkekem
This document provides guidelines for performing tests, adjustments, and repairs on LIEBHERR earthmoving equipment. It states that only qualified personnel should perform work, and all applicable safety laws and regulations must be followed. The guidelines are intended to help ensure work can be done safely without endangering operators or third parties.
Kubota stv32 tractor service repair manualfjjsjeskkekem
This document provides specifications and information for the STV32, STV36, and STV40 tractors. It includes details on the engine, transmission, dimensions, tires, PTO system, hydraulic system, three point hitch, battery, and other components. Maintenance instructions are also provided, outlining various check points to perform every 50 hours, 100 hours, and other intervals. Handling precautions are listed for electrical parts, wiring, batteries, fuses, and connectors to ensure safety when working on the tractors.
Kubota l175 tractor service repair manualfjjsjeskkekem
This shop manual provides service and repair information for Kubota L175, L210, L225, L225DT, and L260 tractor models. The manual includes an index listing components by model and section. Sections cover systems like brakes, clutch, engine, transmission, differential, hydraulics, and electrical. Specifications, tune-up procedures, sizes, clearances and capacities are also included in condensed tables.
Liebherr r964 c 1009 hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 1008 hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 448 hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r960 demolition 1465 hydraulic excavator service repair manualfjjsjeskkekem
This document is a service manual that covers maintenance and repair for various systems of an industrial machine. It includes sections on technical data, maintenance procedures, drive systems, cooling systems, hydraulics, electrical systems, gearboxes, and other components. The manual provides instructions and specifications to service the machine.
Liebherr r906 1449 classic hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual for Liebherr hydraulic excavators. It contains 18 sections that provide technical data, design descriptions, and service/setup instructions for the machines. The manual is intended to assist customer support but does not replace proper training. It includes symbols to identify dangers, requirements, and expected results. The sections cover general information, tools, technical specifications, the engine/motor, couplings, hydraulic and electrical systems, swing/travel components, and options like the cab.
Liebherr lh110 m 1227 (tier4f) hydraulic excavator service repair manualfjjsjeskkekem
The document is a technical manual that discusses the mounting of standard and fine thread clamping nuts, and mounting clamping nuts on suspensions with swing brakes. It includes figures showing the components of differential cylinders and shock absorbers, and tables listing recommended corrosion inhibitors and base coats and paints from Liebherr. The manual instructs the reader to click on a link to access the complete manual.
Liebherr lh110 c 1228 (tier4f) hydraulic excavator service repair manualfjjsjeskkekem
The document is a technical manual that includes diagrams and descriptions of mounting different types of clamping nuts, components of hydraulic cylinders and shock absorbers, tables with corrosion inhibitor recommendations and paint options. It discusses mounting standard and fine thread clamping nuts, components of differential cylinders and shock absorbers that are at risk for corrosion, and provides corrosion protection product information from Liebherr. The manual encourages the reader to download a complete PDF version for more details.
Liebherr lh60 m timber hydraulic excavator service repair manualfjjsjeskkekem
This document provides safety warnings and instructions for operating a hydraulic excavator. It outlines hazards associated with the machine and stresses the importance of following safety precautions to prevent injury. Specific dangers are indicated by warning signs on the machine. The document also defines the designated use of the excavator as loosening, picking up, transporting, and dumping materials while following technical safety guidelines. Any other uses are considered not in accordance with proper operation of the machine.
Liebherr lh35 1201 hydraulic excavator service repair manualfjjsjeskkekem
The document is a technical manual that was printed on December 25, 2019 at 21:58. It contains instructions and diagrams for mounting different clamping nuts, adjusting swing brakes, and identifying components of hydraulic cylinders and shock absorbers that are at risk for corrosion. It also includes tables listing recommended corrosion inhibitors and paints from Liebherr for protecting hydraulic cylinder components from corrosion.
Liebherr lh30 1210 hydraulic excavator service repair manualfjjsjeskkekem
The document is a technical manual that was printed on December 25, 2019 at 21:58. It contains instructions and diagrams for mounting different clamping nuts, adjusting swing brakes, and identifying components of hydraulic cylinders and shock absorbers that are at risk for corrosion. It also includes tables listing recommended corrosion inhibitors and paints from Liebherr for protecting hydraulic cylinder components from corrosion.
Liebherr er 902 hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual that provides technical data, maintenance guidelines, and information on systems for hydraulic excavators models ER 900-942. It covers general information, tools, the engine, coupling and splitterbox, hydraulic system, hydraulic components, electrical system, swing gear, swing ring, travel gear, track components, undercarriage and uppercarriage attachments, cab heater and air conditioning. The manual is intended to assist with maintenance and repairs for the excavator models.
Jcb tm320 telescopic wheel loader service repair manual sn 2681926 and upfjjsjeskkekem
This service manual section provides instructions for removing and installing the master clutch, as well as disassembling and assembling it. The master clutch controls gear selection in the transmission. Removal involves using jacking bolts to lift the clutch cover and locking plates to secure the clutch assembly. The various clutch components like the drum, plates, carrier and housing can then be accessed. Installation follows the reverse process and notes to check components for wear, replace seals with a mandrel, and apply threadlock. Torque specifications are provided for attaching hardware.
Jcb 1253, 1202, 1553, 1554 liftall service repair manual from 6600001 to 6600785fjjsjeskkekem
The document is a service manual for the Liftall 1253/1202/1553/1554 machines. It contains sections covering general information such as machine identification, load charts, torque specifications, and service tools. It also includes sections specific to the body and framework, electrics, hydraulics, and engine of the machines. The manual provides information and specifications to assist with maintenance and repair of the Liftall models.
Jcb 1253, 1202, 1553, 1554 liftall service repair manual from 2087061 to 2089561fjjsjeskkekem
This document provides service information for the Liftall 1253/1202/1553/1554, including sections covering general information, safety, maintenance, body/framework, electrics, controls, hydraulics, transmission, brakes and engine. It includes identification of machine components, load charts, torque specifications, service tools list and numerical references.
New holland we190 wheel loader service repair manualfjjsjeskkekem
This service manual provides information on wheeled excavators including the WE190, WE210, WE230, WE210 Industrial, and WE230 Industrial models. It covers technical specifications, maintenance procedures, and troubleshooting for the upper structure, undercarriage, front attachment, hydraulic and electrical systems. The manual contains diagrams and specifications for components such as the boom, undercarriage, hydraulic pumps and valves, electrical systems, and electronics.
New holland l220 skid steer loader service repair manualfjjsjeskkekem
This document is a service manual for New Holland 200 Series Skid Steer Loaders and Compact Track Loaders. It provides information on the hydraulic, pneumatic, electrical, electronic and other systems of these machines. The manual is divided into sections covering topics such as the primary and secondary hydraulic systems, electrical power system, engine components, transmission, axles, brakes, steering, frame, safety features and more. Torque specifications are provided for metric hardware.
New holland b110 btc backhoe loader service repair manualfjjsjeskkekem
This document contains service manuals for various backhoe loader models. It includes sections on safety, maintenance, technical specifications, troubleshooting, and repair procedures for components like the transmission, axles, brakes, hydraulic system, and more. The document provides detailed information on maintaining and repairing the different systems of backhoe loaders.
Liebherr rl 22 b rl22b pipe layer service repair manualfjjsjeskkekem
This document provides guidelines for performing tests, adjustments, and repairs on LIEBHERR earthmoving equipment. It states that only qualified personnel should perform work, and all applicable safety laws and regulations must be followed. The guidelines are intended to help ensure work can be done safely without endangering operators or third parties.
Kubota stv32 tractor service repair manualfjjsjeskkekem
This document provides specifications and information for the STV32, STV36, and STV40 tractors. It includes details on the engine, transmission, dimensions, tires, PTO system, hydraulic system, three point hitch, battery, and other components. Maintenance instructions are also provided, outlining various check points to perform every 50 hours, 100 hours, and other intervals. Handling precautions are listed for electrical parts, wiring, batteries, fuses, and connectors to ensure safety when working on the tractors.
Kubota l175 tractor service repair manualfjjsjeskkekem
This shop manual provides service and repair information for Kubota L175, L210, L225, L225DT, and L260 tractor models. The manual includes an index listing components by model and section. Sections cover systems like brakes, clutch, engine, transmission, differential, hydraulics, and electrical. Specifications, tune-up procedures, sizes, clearances and capacities are also included in condensed tables.
Liebherr r964 c 1009 hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 1008 hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 448 hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r960 demolition 1465 hydraulic excavator service repair manualfjjsjeskkekem
This document is a service manual that covers maintenance and repair for various systems of an industrial machine. It includes sections on technical data, maintenance procedures, drive systems, cooling systems, hydraulics, electrical systems, gearboxes, and other components. The manual provides instructions and specifications to service the machine.
Liebherr r906 1449 classic hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual for Liebherr hydraulic excavators. It contains 18 sections that provide technical data, design descriptions, and service/setup instructions for the machines. The manual is intended to assist customer support but does not replace proper training. It includes symbols to identify dangers, requirements, and expected results. The sections cover general information, tools, technical specifications, the engine/motor, couplings, hydraulic and electrical systems, swing/travel components, and options like the cab.
Liebherr lh110 m 1227 (tier4f) hydraulic excavator service repair manualfjjsjeskkekem
The document is a technical manual that discusses the mounting of standard and fine thread clamping nuts, and mounting clamping nuts on suspensions with swing brakes. It includes figures showing the components of differential cylinders and shock absorbers, and tables listing recommended corrosion inhibitors and base coats and paints from Liebherr. The manual instructs the reader to click on a link to access the complete manual.
Liebherr lh110 c 1228 (tier4f) hydraulic excavator service repair manualfjjsjeskkekem
The document is a technical manual that includes diagrams and descriptions of mounting different types of clamping nuts, components of hydraulic cylinders and shock absorbers, tables with corrosion inhibitor recommendations and paint options. It discusses mounting standard and fine thread clamping nuts, components of differential cylinders and shock absorbers that are at risk for corrosion, and provides corrosion protection product information from Liebherr. The manual encourages the reader to download a complete PDF version for more details.
Liebherr lh60 m timber hydraulic excavator service repair manualfjjsjeskkekem
This document provides safety warnings and instructions for operating a hydraulic excavator. It outlines hazards associated with the machine and stresses the importance of following safety precautions to prevent injury. Specific dangers are indicated by warning signs on the machine. The document also defines the designated use of the excavator as loosening, picking up, transporting, and dumping materials while following technical safety guidelines. Any other uses are considered not in accordance with proper operation of the machine.
Liebherr lh35 1201 hydraulic excavator service repair manualfjjsjeskkekem
The document is a technical manual that was printed on December 25, 2019 at 21:58. It contains instructions and diagrams for mounting different clamping nuts, adjusting swing brakes, and identifying components of hydraulic cylinders and shock absorbers that are at risk for corrosion. It also includes tables listing recommended corrosion inhibitors and paints from Liebherr for protecting hydraulic cylinder components from corrosion.
Liebherr lh30 1210 hydraulic excavator service repair manualfjjsjeskkekem
The document is a technical manual that was printed on December 25, 2019 at 21:58. It contains instructions and diagrams for mounting different clamping nuts, adjusting swing brakes, and identifying components of hydraulic cylinders and shock absorbers that are at risk for corrosion. It also includes tables listing recommended corrosion inhibitors and paints from Liebherr for protecting hydraulic cylinder components from corrosion.
Liebherr er 902 hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual that provides technical data, maintenance guidelines, and information on systems for hydraulic excavators models ER 900-942. It covers general information, tools, the engine, coupling and splitterbox, hydraulic system, hydraulic components, electrical system, swing gear, swing ring, travel gear, track components, undercarriage and uppercarriage attachments, cab heater and air conditioning. The manual is intended to assist with maintenance and repairs for the excavator models.
Jcb tm320 telescopic wheel loader service repair manual sn 2681926 and upfjjsjeskkekem
This service manual section provides instructions for removing and installing the master clutch, as well as disassembling and assembling it. The master clutch controls gear selection in the transmission. Removal involves using jacking bolts to lift the clutch cover and locking plates to secure the clutch assembly. The various clutch components like the drum, plates, carrier and housing can then be accessed. Installation follows the reverse process and notes to check components for wear, replace seals with a mandrel, and apply threadlock. Torque specifications are provided for attaching hardware.
Jcb 1253, 1202, 1553, 1554 liftall service repair manual from 6600001 to 6600785fjjsjeskkekem
The document is a service manual for the Liftall 1253/1202/1553/1554 machines. It contains sections covering general information such as machine identification, load charts, torque specifications, and service tools. It also includes sections specific to the body and framework, electrics, hydraulics, and engine of the machines. The manual provides information and specifications to assist with maintenance and repair of the Liftall models.
Jcb 1253, 1202, 1553, 1554 liftall service repair manual from 2087061 to 2089561fjjsjeskkekem
This document provides service information for the Liftall 1253/1202/1553/1554, including sections covering general information, safety, maintenance, body/framework, electrics, controls, hydraulics, transmission, brakes and engine. It includes identification of machine components, load charts, torque specifications, service tools list and numerical references.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Kalyan chart DP boss guessing matka results➑➌➋➑➒➎➑➑➊➍
8328958814Satta Matka is a number-based game. There are several markets, each with its owner responsible for releasing the lottery satta Matka market results on time. Kalyan market, Worli market, main Mumbai market, Rajdhani market, and Milan market are some of the main markets or bazaars involved in the satta Matka game. The oldest and most legitimate markets are in Kalyan and Main Mumbai. Every Satta Market has an open and close time. The satta results for these markets are published on or shortly after the open and close times. During the open result, two numbers are decoded, one of which is a three-digit number and the other a single-digit number. Similarly, three-digit and single-digit numbers are declared during the satta market's close. The last digit after adding the three digits of the open or close result is usually the single digit declared during the open and close results.KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAINSATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSdp boss net, dp satta, dpboss dpboss, indian satta matka, kalyan matkà result today , matka boss, matka result live, matka satta result today, satamatka com, satta boss, satta matka king, sattamatkà, sattamatkà result, sattamatta com, sattmatka sattmatka, star matka, tara matka, tara satta matka, worli matka, indian matka, matka live, kalyan guessing, satta fix, kalyan final ank, dp matka, dpboss net, sata mata com, सट्टा मटका, sattamatkà 143, golden matka, satta matta matka 143, satta fast, kalyan open, satta 143, dpboss 143 guessing, dpboss satta, golden satta matka, satta bajar
Satta Matka Market is India's leading website providing the quickest sattamatka outcome, experienced in Satta Matka game. Our services include free Satta Matka Trick and Tips for Kalyan Matka and Disawar Satta King, as well as satta matka graphs, online play, tips and more. Our team of experts strive to help you recoup your losses quickly through our proposals such as Free Satta Matka Tips and Kalyan Bazar Tips. We are known as India's best Matka DpBoss portal site, here to deliver updates on all sorts of Satta Market like Kalyan Bazar, Milan, Rajdhani, Time Bazaar, Main and the most current charts. Stay tuned with us for more live updates on the Satta market
2. 15 - Engine
09 - Bedplate
00 - General
15 - 67 9813/7450-2 15 - 67
00 - General
Introduction .................................................... 15-67
Remove and Install ....................................... 15-68
Introduction
The bedplate acts as the main strength component
of the engine. it maintains the correct alignment and
supports the weight of the internal components.
Figure 145.
1
2
1 Bedplate
2 Crankcase
3. 15 - Engine
09 - Bedplate
00 - General
15 - 68 9813/7450-2 15 - 68
Remove and Install
Special Tools
Description Part No. Qty.
Template for Sealant
Bedplate to Crankcase
(4 Cyl)
892/12356 1
Torque Wrench
(10-100Nm)
993/70111 1
Consumables
Description Part No. Size
Cleaner/Degreaser
- General purpose
solvent based parts
cleaner
4104/1557 0.4L
CAUTION This component is heavy. It must only
be removed or handled using a suitable lifting
method and device.
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Remove the engine, refer to (PIL 15-00).
4. Remove the drive belt, refer to (PIL 15-18).
5. Remove the crankshaft pulley, refer to (PIL
15-12).
6. Remove the oil sump, refer to (PIL 15-45).
7. Disconnect and remove the fuel pipes from the
injectors, refer to (PIL 18-96).
8. Remove the rocker cover, refer to (PIL 15-42).
9. Remove the fuel injectors, refer to (PIL 18-18).
10. Remove the rocker assembly including the push
rods, refer to (PIL 15-42).
11. It is not necessary to remove the cylinder head
assembly to remove the crankshaft. If however
the cylinder head needs to be removed for other
reasons (for piston and connecting rod removal
for example) remove it now, refer to (PIL 15-06).
12. Remove the fuel injection pump, refer to (PIL
18-18).
13. Remove the starter motor, refer to (PIL 15-75).
14. Remove the high duty PTO (Power Take-Off)
device (if installed).
15. Position the engine upside down in a suitable jig
or fixture, supported at the front of the cylinder
block.
16. Remove the flywheel, refer to (PIL 15-54).
17. Remove the flywheel housing, refer to (PIL
15-54).
18. Remove the fuel injection pump drive gear, refer
to (PIL 15-51).
19. Remove the oil pump, refer to (PIL 15-60).
20. Remove the high duty PTO idler drive gear (if
installed), refer to (PIL 15-51).
21. Remove the crankshaft drive gear, refer to (PIL
15-51).
22. Remove the camshaft, refer to (PIL 15-15).
23. Remove the rear timing case, refer to (PIL
15-51).
24. If the pistons and connecting rods have not been
removed, undo and remove the main bearing
caps, refer to (PIL 15-12).
5. 15 - Engine
09 - Bedplate
00 - General
15 - 70 9813/7450-2 15 - 70
Remove
1. Remove the bedplate peripheral bolts.
2. Progressively remove the main bearing bolts in
reverse order starting at bolt 10. The bolts MUST
NOT be re-used. Discard the bolts.
3. Install the four temporary lifting bolts. Carefully
separate the bedplate from the crankcase. Use
suitable lifting equipment (if the bedplate is lifted
manually, two people will be required). DO NOT
use a lever to separate the bedplate.
4. Remove and discard the O-ring.
5. Carefully remove the upper bearing shells from
the bedplate, remove the bedplate.
Figure 147.
18
18
18
18
18
T6
T6
T6
18
12
T6
P3
13
11
A (T5)
V
YY P2
51
9
4
8
3
7
62
10
T4
T4
W
P2
B (T5)
Y Y P2
X
1-10 Main bearing bolts 11 Bedplate peripheral bolts (x16)
12 Bedplate 13 Crankcase
18 Lower bearing shells (x5) A Left side template
B Right side template T3 Angle Gauge (obtain locally)
6. 15 - Engine
09 - Bedplate
00 - General
15 - 71 9813/7450-2 15 - 71
T4 Guide pins (x2 obtain locally) T5 Sealant template
T6 Lifting bolts (x4 obtain locally) V Sealant template portion for removal
W Bearing tab X Rear main bearing
Y Bearing location tab P2 Anaerobic sealant
P3 O-ring
7. 15 - Engine
09 - Bedplate
00 - General
15 - 72 9813/7450-2 15 - 72
Before Installation
1. Clean off all traces of the old sealant compound
from the crankcase and bedplate mating faces.
2. Use a suitable degreasing agent to carefully
clean the main bearing saddles in the bedplate
and crankcase. Take care not to block the oil
ways or the piston cooling jets.
Consumable: Cleaner/Degreaser - General
purpose solvent based parts cleaner
Important: Anaerobic sealant will not start to cure
whilst it is open to the atmosphere, however when
air is excluded (for instance when the two parts are
put together) it will immediately start to harden. Make
sure that all the necessary tools, bolts etc. are readily
available prior to assembling the components. The
parts must be installed and tightened to the correct
torque value within 5 minutes (with a maximum
permissible time of 15 minutes).
Important: BEFORE installing the bedplate: DO NOT
rotate the crankshaft. Make sure that the upper main
bearing shells are flush with the bottom face of the
crankcase.
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Make sure that all items are clean and free from
damage and corrosion.
3. Install the two guide pins T4 to the crankcase
bedplate fixing holes as shown.
4. Install the four lifting bolts T6 to the bedplate as
shown.
5. Install a new O-ring at the bedplate.
6. Use a suitable degreasing agent to clean both
sides of the lower bearing shells. Assemble the
lower bearing shells into the bedplate. Lubricate
the lower bearing shells with clean engine oil.
Note: Make sure that the location tab W engages
in the slot as shown.
Consumable: Cleaner/Degreaser - General
purpose solvent based parts cleaner
7. Note: The sealant template T5 is used on
the crankcase, NOT the bedplate. The sealant
template T5 comprises of two pieces, A and B.
Modify the template A by removing portion V.
Special Tool: Template for Sealant Bedplate to
Crankcase (4 Cyl) (Qty.: 1)
8. Locate the holes in the templates A and B using
four fixing bolts at positions Y. Use the templates
as a guide apply beads of sealant P2 around the
crankcase/bedplate mating face as shown to the
dimension specified.
Length/Dimension/Distance: 1.5mm
9. Remove the four fixing bolts at positions Y.
Remove the templates A and B, make sure
you do not smudge the sealant. Discard the
templates.
10. Add beads of sealant P2 around the four bolt
holes at positions Y, so as to join the sealant
beads as shown at X.
11. Make sure that the location guide pins T4 are in
position in the crankcase. Assemble the bedplate
to the crankcase use the alignment guide pins.
12. Note: The bedplate is heavy. Two people will
be required to lift and rotate the bedplate safely
on to the crankcase. Install new main bearing
bolts 1-10. Tighten the bolts to the correct torque
value in pairs, starting in the centre and working
outwards (in sequence 1-10) to the 1st stage pre-
torque.
Special Tool: Torque Wrench (10-100Nm) (Qty.:
1)
13. Install the bedplate peripheral bolts. Tighten the
bolts to the correct torque value.
14. After installation and tightening the bedplate
peripheral bolts, further tighten the main bearing
bolts in pairs, starting in the centre and working
outwards (in sequence 1-10) to the 2nd stage
pre-torque.
15. Finally, angle tighten the main bearing bolts in
pairs, starting in the centre and working outwards
(in sequence 1-10) for the final stage torque. Use
the torque and angle method, refer to Fasteners
and Fixings, General, Introduction (PIL 72-00).
Important: If the parts have not been tightened to the
correct torque value within the maximum 15 minute
time period, then the parts must be separated,
thoroughly cleaned and fresh sealant applied.
After Installation
1. Check that the crankshaft can be freely rotated
by hand. Remove the bedplate lifting bolts T6.
2. Carry out the procedures listed, Before removal
in reverse order.
Table 54. Torque Table
Item Torque Value
1-10 (1st Stage) 50N·m
1-10 (2nd Stage) 115N·m
8. 15 - Engine
12 - Crankshaft
00 - General
15 - 76 9813/7450-2 15 - 76
Technical Data
Table 55.
Main bearing journal diameter (x4)
- min 87.98mm
- max 88mm
Main rear bearing journal diameter (x1)
- min 99.98mm
- max 100mm
Connecting rod bearing journal diameter
- min 72.98mm
- max 73mm
Maximum wear and ovality on journals
(1)
Crankshaft induction hardness 55 HRc min on surface
Thrust washer width
- min 2.44mm
- max 2.5mm
Crankshaft end float
- min 0.05mm
- max 0.28mm
(1) No visible damage/wear or marks
9. 15 - Engine
12 - Crankshaft
00 - General
15 - 77 9813/7450-2 15 - 77
Component Identification
Figure 148.
B
A
A Crankcase
B Crankshaft
10. 15 - Engine
12 - Crankshaft
00 - General
15 - 78 9813/7450-2 15 - 78
Operation
Lubrication
Oil is fed from the main gallery via five drillings, one
to each of the main bearings. A groove around the
diameter of the upper main bearing shell allows oil
transfer to cross drillings in the crankshaft to feed
each of the big end bearings. Crankshaft gear is
'splash' lubricated. Front and rear crankshaft oil seals
prevent oil leakage from, and dirt ingress to, the
engine.
Figure 149.
1 Main gallery 2 Drillings (x5)
3 Main bearings 4 Big end bearings
5 Cross drillings 6 Crankshaft gear
7 Crankshaft oil seal 8 Crankshaft oil seal
11. 15 - Engine
12 - Crankshaft
00 - General
15 - 79 9813/7450-2 15 - 79
Check (Condition)
1. Check the main bearing surfaces for damage and
excessive wear.
Figure 150.
A
A Main bearing shells
2. Measure the crankshaft diameters to confirm
they are within service limits, refer to Technical
Data (PIL 15-12).
Figure 151.
B
B Crankshaft
3. Check that the oil-way cross drillings in the
crankshaft are clear and free from debris.
Blocked or restricted oil-ways will cause oil
starvation at the big end bearings.
4. Check that the piston cooling J-jets are clear. If
the J-jets cannot be cleared remove the fixing
screws. Remove theJ-jets and discard them.
5. Install new J-jets.
Figure 152.
D
C
C J-jets
D Fixing screws
12. 15 - Engine
12 - Crankshaft
00 - General
15 - 80 9813/7450-2 15 - 80
Remove and Install
Consumables
Description Part No. Size
Cleaner/Degreaser
- General purpose
solvent based parts
cleaner
4104/1557 0.4L
CAUTION This component is heavy. It must only
be removed or handled using a suitable lifting
method and device.
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Remove the engine, refer to (PIL 15-00).
4. Remove the drive belt, refer to (PIL 15-18).
5. Remove the crankshaft pulley, refer to (PIL
15-12).
6. Remove the oil sump, refer to (PIL 15-45).
7. Disconnect and remove the fuel pipes from the
injectors, refer to (PIL 18-96).
8. Remove the rocker cover, refer to (PIL 15-42).
9. Remove the fuel injectors, refer to (PIL 18-18).
10. Remove the rocker assembly including the push
rods, refer to (PIL 15-42).
11. It is not necessary to remove the cylinder head
assembly to remove the crankshaft. If however
the cylinder head needs to be removed for other
reasons (for piston and connecting rod removal
for example) remove it now, refer to (PIL 15-06).
12. Remove the fuel injection pump, refer to (PIL
18-18).
13. Remove the starter motor, refer to (PIL 15-75).
14. Remove the high duty PTO device (if installed).
15. Position the engine upside down in a suitable jig
or fixture, supported at the front of the cylinder
block.
16. Remove the flywheel, refer to (PIL 15-54).
17. Remove the flywheel housing, refer to (PIL
15-54).
18. Remove the fuel injection pump drive gear, refer
to (PIL 15-51).
19. Remove the oil pump, refer to (PIL 15-60).
20. Remove the high duty PTO idler drive gear (if
installed), refer to (PIL 15-51).
21. Remove the crankshaft drive gear, refer to (PIL
15-51).
22. Remove the camshaft, refer to (PIL 15-15).
23. Remove the rear timing case, refer to (PIL
15-51).
24. If the pistons and connecting rods have not been
removed, undo and remove the main bearing
caps, refer to (PIL 15-12).
25. Remove the bedplate, refer to (PIL 15-09).
Remove
1. Remove the thrust washers between the
crankshaft and crankcase rear main bearing.
13. 15 - Engine
12 - Crankshaft
00 - General
15 - 81 9813/7450-2 15 - 81
Figure 153.
C
B
A
A
A Thrust Washers B Crankshaft
C Rear main bearing
2. Put labels on the thrust washers to make sure
that they are installed in the correct positions
during assembly.
3. Use suitable lifting equipment to carefully lift the
crankshaft from the crankcase (if the crankshaft
is lifted manually, two people will be required).
4. Carefully lift out the bearing shells.
Figure 154.
D
D Main bearing shells
5. It is recommended that the bearing shells are
replaced. If however they are to be used again,
put label on the shells to make sure that they
are installed in their original positions during
assembly.
6. Inspect the crankshaft and main bearings etc.
for damage and excessive wear. Refer to Check
Condition (PIL 15-12).
Before Installation
1. Clean off all traces of the old sealant compound
from the crankcase and bedplate mating faces.
2. Use a suitable degreasing agent to carefully
clean the main bearing saddles in the bedplate
and crankcase. Take care not to block the oil
ways or the piston cooling jets.
Consumable: Cleaner/Degreaser - General
purpose solvent based parts cleaner
Important: Cleanliness is of the utmost importance.
Blocked oil-ways or oil jets will cause engine failure.
Before you install the crankshaft make sure that ALL
oil-ways and jets are clear and free from debris.
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Make sure that all items are clean and free from
damage and corrosion.
3. If removed or a new crankcase is being installed
then install cooling J jets as follows:
14. 15 - Engine
12 - Crankshaft
00 - General
15 - 82 9813/7450-2 15 - 82
Figure 155.
F
E
E J jets (x4)
F Fixing screws
3.1. Insert the cooling jets into the crankcase.
3.2. Note: There are different types of cooling
jets installed depending on the engine
application. The jets are colour coded.
3.3. Be sure to install the correct jets. Refer to
the relevant parts catalogue for the correct
cooling jet identification.
3.4. Tighten the retaining screws to the correct
torque value.
4. Install the upper bearing shells as follows:
Figure 156.
D
G
D Main bearing shells
G Bearing location tab
4.1. Use a suitable degreasing agent to make
sure that the surface of the upper bearing
shells are clean.
Consumable: Cleaner/Degreaser - General
purpose solvent based parts cleaner
4.2. Assemble the bearing shells into the
crankcase bearing saddles. Make sure that
the location tab engages into the slot as
shown.
4.3. Important: Make sure that the oil-way holes
in the bearing saddles align with the holes
in the bearing shell. If the holes are even
partially misaligned the piston cooling oil jet
will be restricted, causing the engine to fail.
4.4. Lubricate the upper bearing shells with
clean engine oil.
5. Use suitable lifting equipment (if the crankshaft
is lifted manually, two people will be required), to
carefully lower the crankshaft into the crankcase.
DO NOT rotate the crankshaft, the bearing shells
can become dislodged, refer to step 4.
6. Install the thrust washers as follows:
15. 15 - Engine
12 - Crankshaft
00 - General
15 - 83 9813/7450-2 15 - 83
Figure 157.
C
B
A
A
A
H
A Thrust washers B Crankshaft
C Rear main bearing H Oil slot - thrust washers
6.1. Slide the thrust washers between the
crankshaft and the crankcase rear main
bearing.
6.2. Make sure that they are installed in the
correct positions, with the two slots facing
outwards from the bearing saddle.
6.3. If necessary, push the crankshaft forward
and then backwards to obtain clearance to
install the thrust washers.
6.4. DO NOT rotate the crankshaft, the bearing
shells can become dislodged, refer to step
4.
7. Check that the crankshaft end float is within
service limits, refer to Technical Data (PIL 15-12).
Table 56. Torque Values
Item Nm
F 24
16. 15 - Engine
12 - Crankshaft
03 - Main Bearing
15 - 84 9813/7450-2 15 - 84
03 - Main Bearing
Introduction .................................................... 15-84
Check (Condition) .......................................... 15-85
Remove and Install ....................................... 15-85
Introduction
In a piston engine, the main bearings are the
bearings on which the crankshaft rotates.
The bearings hold the crankshaft in place and
prevent the forces created by the piston and
transmitted to the crankshaft by the connecting rods
from dislodging the crankshaft, instead forcing the
crank to convert the reciprocating movement into
rotation.
Figure 158.
A
B
A Main bearing
B Crankshaft
17. 15 - Engine
12 - Crankshaft
03 - Main Bearing
15 - 85 9813/7450-2 15 - 85
Check (Condition)
(For: JCB Tier 4i /T4F <55kW Engine 4
Cyl)
1. Check the bearing shell surfaces for signs of
damage and excessive wear.
2. Measure the crank pin diameters to confirm they
are within service limits.
Refer to: PIL 15-12-00.
3. Renew any parts that are worn or not within the
specified tolerances.
Remove and Install
(For: JCB Tier 4i /T4F <55kW Engine 4
Cyl)
Special Tools
Description Part No. Qty.
Torque Wrench
(10-100Nm)
993/70111 1
Before Removal
This procedure requires service parts. Make sure
you have obtained the correct service parts before
you start. Refer to Parts Catalogue.
1. Make the machine safe.
Refer to: PIL 01-03.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Remove the engine from the machine.
Refer to: PIL 15-00-00.
4. Disconnect and remove the fuel pipes from the
injectors.
Refer to: PIL 18-96-00.
5. Remove the rocker cover.
Refer to: PIL 15-42-06.
6. Remove the fuel injectors.
Refer to: PIL 18-18-03.
7. Drain the oil from the engine.
Refer to: PIL 15-21-00.
8. Remove the oil sump.
Refer to: PIL 15-45-00.
9. Position the engine upside down in a suitable jig
or fixture, supported at the front of the crankcase.
The connecting rod and the big-end bearing cap
have been fracture split and must be kept together
as a set. Care must be taken to avoid contamination
and or damage to the fracture split surfaces.
Remove
1. It is recommended that the big-end bearing caps
are removed in pairs, cylinders 1 and 4 and
cylinders 2 and 3. Rotate the crankshaft so that
the big-end bearing caps on cylinders 2 and 3 are
positioned as shown.
18. 15 - Engine
12 - Crankshaft
03 - Main Bearing
15 - 86 9813/7450-2 15 - 86
2. Remove the bolts and lift off the big-end bearing
caps from the connecting rods. The bolts must
not be re-used, discard the bolts.
Figure 159.
X
1 2
1 Big-end bearing caps
2 Big-end bearing cap bolts
X Cast notch
2.1. Make sure that the tool is kept in inline
with the bolt to avoid damaging the screw
thread.
3. Lift out the bearing shells from the bearing caps.
Carefully rotate the crank to disengage from the
connecting rods and get access to the upper
bearing shells. Lift out the upper bearing shells.
It is recommended that the bearing shells are
renewed. If they are to be reused, label the
bearing shells to make sure that they are installed
in their original positions on assembly.
Figure 160.
4
3
Z
1
2
6
5
1 Big-end bearing cap
2 Bolts
3 Connecting rod
4 Piston
5 Piston rings
6 Big end bearing shells
Z Fracture split surfaces
4. Carefully rotate the crankshaft to position the big-
end bearing caps of cylinders 1 and 4. Make
sure that the crank does not foul the connecting
rods of cylinders 2 and 3. Remove the bearing
caps and bearing shells as described in previous
steps.
5. Inspect the big-end bearings for signs of damage
and excessive wear.
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Make sure that all items are clean and free from
damage and corrosion.
3. Install the upper bearing shell to the connecting
rod. Lubricate the bearing shell with clean engine
oil.
4. Install the lower bearing shell to the big-end
bearing cap. Lubricate the bearing shell with
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. 15 - Engine
12 - Crankshaft
03 - Main Bearing
15 - 87 9813/7450-2 15 - 87
clean engine oil. Install the big-end bearing cap
to the connecting rod. Make sure that the cast
notch on the bearing cap faces to the front of the
engine. Use compressed air to clean the fracture
surfaces before assembly.
5. Install new big end bearing cap bolts. Tighten the
new bolts in three stages to the correct torque
value.
Special Tool: Torque Wrench (10-100Nm) (Qty.:
1)
5.1. Make sure that the tool is kept in inline
with the bolt to avoid damaging the screw
thread.
5.2. The bolts are tightened using a torque and
angle method.
Refer to: PIL 72-00-00.
Figure 161.
0° +90°
Y
Figure 162.
T3
T3 Angle gauge (obtain locally)
After Installation
1. The after installation procedure is the opposite of
the before removal procedure.
Table 57. Torque Table
Item Torque Value
(Nm)
Angle (de-
grees)
2 (1st Stage) 35
2 (2nd Stage) 65
2 (Final Stage) 90
21. 15 - Engine
12 - Crankshaft
06 - Front Oil Seal
15 - 88 9813/7450-2 15 - 88
06 - Front Oil Seal
Remove and Install
(For: JCB Tier 4i /T4F <55kW Engine 4
Cyl)
Special Tools
Description Part No. Qty.
Crankshaft Front Oil
Seal Installation Tool
892/01157 1
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Get access to the engine.
4. Remove the drive belt, refer to (PIL 15-18).
5. Remove the crankshaft pulley, refer to (PIL
15-12-12).
Remove
1. Use a suitable lever behind the lip of the
seal, carefully prise out the oil seal from the
counterbore in the crankcase. Take care not
to scratch or damage the counterbore or the
crankshaft hub. Damaged or dirty sealing faces
will cause the oil seal to fail.
Figure 163.
C
A
B
A Crankshaft oil seal
B Crankcase
C Crankshaft hub
Install
1. Make sure that the counterbore and the
crankshaft hub are clean and free from damage
and corrosion. Use a suitable degreasing agent
to clean all traces of oil and grease from the
counterbore. Important: The oil seal has a special
coating and MUST be installed dry without
lubricant.
2. Dismantle the seal installation tool. Bolt the
centre body to the crankshaft hub, using the
bolts. Refer to Figure 164.
Special Tool: Crankshaft Front Oil Seal
Installation Tool (Qty.: 1)
3. Install the oil seal on to the centre body. Make
sure that the seal is installed the correct way
around. Assemble the outer sleeve on to the
centre body and install the screw. Refer to Figure
164.
22. 15 - Engine
12 - Crankshaft
06 - Front Oil Seal
15 - 89 9813/7450-2 15 - 89
Figure 164.
F D
G
H
B
G
F
C
A
E
A Crankshaft oil seal B Crankcase
C Crankshaft hub D Seal installation tool
E Fixing bolts (x3) F Centre body
G Outer sleeve H Screw
4. Turn the screw to push the seal squarely into
the counterbore until the outer sleeve comes
up against the front edge of the counterbore.
When correctly installed, the front face of the seal
should be flush with the edge of the counterbore
within the specified tolerance. Refer to Figure
165.
Dimension: -0.5 -0/+0.5mm
Figure 165.
B
G
F
C
A
A Crankshaft oil seal
B Crankcase
C Crankshaft hub
F Centre body
G Outer sleeve
5. Remove the seal installation tool.