Subsea Bullseyes and slope indicators used to measure the incline angle of subsea structures and equipment and for underwater levelling.

1. www.subseabullseye.com
email: sales@icltech.co.uk
tel: +44 (0) 141 332 1331
fax: +44 (0) 141 332 3129
I-TECH Subsea Bullseye / Slope Indicator
I-TECH Subsea Bullseyes are slope indicators used to
measure the incline angle of subsea structures and
equipment.
ICL Tech Ltd manufacture and export I-TECH Subsea
Bullseyes worldwide. Based in Scotland (UK) and with
over 30 years involvemenet in the Oil & Gas Industry,
ICL Tech have built up a loyal customer base that
includes many major players in the industry.
I-TECH Subsea Bullseyes are pressure tested to
6000m (20,000ft) depth and with no recorded
service failures in over 30 years the I-TECH Subsea
Bullseye is the proven solution for your subsea
application.
Type tested to 6100m / 20,000ft
Incredibly strong all-polymer
construction keeps weight low
Range of stock sizes and measurement 1 2
ranges avialable (see table below)
Customer specials and bespoke
solutions available on request
Accurate to ±0.25° 4 3
Proven high quality, maintenance free
solution for subsea incline monitoring
Applications: D1
BOP Stacks
Christmas Trees D2
Flex Joints
Habitats
Pipelines
Manifolds H1
Suction Piles H2
PLEMS / PLETS
Risers
Part № Diameter (D1) Dome Diamter (D2) Overall Height (H1) Height to shoulder (H2) Measurement Range Weight
ICL/SI/350/15 350.0mm 313.4mm 102.5mm 87.5mm 0-15° 10.6kg
ICL/SI/350/10 350.0mm 313.4mm 102.5mm 87.5mm 0-10° 10.6kg
ICL/SI/350/7 350.0mm 313.4mm 83.0mm 68.0mm 0-7° 8.5kg
ICL/SI/350/5 350.0mm 313.4mm 83.0mm 68.0mm 0-5° 8.5kg
ICL/SI/350/2 350.0mm 313.4mm 83.0mm 68.0mm 0-2° 8.5kg
ICL/SI/250/7 250.0mm 213.4mm 83.0mm 68.0mm 0-7° 4.0kg
ICL/SI/250/5 250.0mm 213.4mm 83.0mm 68.0mm 0-5° 4.0kg
ICL/SI/250/2 250.0mm 213.4mm 83.0mm 68.0mm 0-2° 4.0kg
ICL/SI/150/5 150.0mm N/A 60.5mm 60.5mm 0-5° 1.2kg
ICL/SI/100/7 100.0mm N/A 48.5mm 48.5mm 0-7° 0.5kg
Standard Stock Items *(custom/bespoke items manufactured to specification)