Technical data SCHMIDT & BENDER 5-20x50 PM II Ultra Short | Optics TradeOptics-Trade
Technical data SCHMIDT & BENDER 5-20x50 PM II Ultra Short | Optics Trade
http://www.optics-trade.eu/shop/en/shopby/riflescope_series-schmidt_bender_pm_ii.html
Instructions SCHMIDT & BENDER 3-27x56 PM II High Power Illuminated Double Tur...Optics-Trade
This document provides operating instructions for the Schmidt & Bender 3-27x56 PMII High Power scope. It details the scope's technical specifications, accessories, controls and adjustments. Key points covered include adjusting the diopter and parallax settings, operating the illuminated reticle, replacing the battery, and using the reticle for distance estimation. Maintenance tips and safety warnings are also provided to ensure proper use of the high-precision scope.
Technical data SCHMIDT & BENDER 3-27x56 PM II High Power | Optics TradeOptics-Trade
The document describes the specifications for Schmidt & Bender's NEW3-27 x 56 PM II rifle scope. It has a 3-27x magnification range, 56mm objective lens, and is designed for long range shooting with features like locking turrets, waterproofing up to 25 meters, and rugged construction tested by USSOCOM. The document provides detailed technical information on the scope's dimensions, optics, adjustments, environmental properties, and available configurations.
This document is an operating manual for the Schmidt & Bender 5-20x50 PMII ECOS-O rifle scope. It provides technical specifications for the scope, including magnification range, objective lens size, eye relief, and dimensions. It also lists the accessories included and provides instructions for adjusting focus, parallax, using the covers and anti-reflective device, and correcting point of impact using the elevation and windage turrets. The turrets feature locking functions to prevent inadvertent adjustments.
Technical data SCHMIDT & BENDER 1,1-5x24 Stratos | Optics TradeOptics-Trade
The document summarizes new rifle scopes from Schmidt & Bender GmbH, including the Stratos rifle scope. Key details include the Stratos having a 5x zoom, new programmable illumination unit with Flash Dot technology, and adjustable turrets. Technical specifications on dimensions, optics, adjustments, and environmental properties are provided for the Stratos rifle scope. Available configurations including turret types, the new programmable illumination technology, and reticle options are also listed.
Technical data SCHMIDT & BENDER 5-20x50 PM II Ultra Short | Optics TradeOptics-Trade
Technical data SCHMIDT & BENDER 5-20x50 PM II Ultra Short | Optics Trade
http://www.optics-trade.eu/shop/en/shopby/riflescope_series-schmidt_bender_pm_ii.html
Instructions SCHMIDT & BENDER 3-27x56 PM II High Power Illuminated Double Tur...Optics-Trade
This document provides operating instructions for the Schmidt & Bender 3-27x56 PMII High Power scope. It details the scope's technical specifications, accessories, controls and adjustments. Key points covered include adjusting the diopter and parallax settings, operating the illuminated reticle, replacing the battery, and using the reticle for distance estimation. Maintenance tips and safety warnings are also provided to ensure proper use of the high-precision scope.
Technical data SCHMIDT & BENDER 3-27x56 PM II High Power | Optics TradeOptics-Trade
The document describes the specifications for Schmidt & Bender's NEW3-27 x 56 PM II rifle scope. It has a 3-27x magnification range, 56mm objective lens, and is designed for long range shooting with features like locking turrets, waterproofing up to 25 meters, and rugged construction tested by USSOCOM. The document provides detailed technical information on the scope's dimensions, optics, adjustments, environmental properties, and available configurations.
This document is an operating manual for the Schmidt & Bender 5-20x50 PMII ECOS-O rifle scope. It provides technical specifications for the scope, including magnification range, objective lens size, eye relief, and dimensions. It also lists the accessories included and provides instructions for adjusting focus, parallax, using the covers and anti-reflective device, and correcting point of impact using the elevation and windage turrets. The turrets feature locking functions to prevent inadvertent adjustments.
Technical data SCHMIDT & BENDER 1,1-5x24 Stratos | Optics TradeOptics-Trade
The document summarizes new rifle scopes from Schmidt & Bender GmbH, including the Stratos rifle scope. Key details include the Stratos having a 5x zoom, new programmable illumination unit with Flash Dot technology, and adjustable turrets. Technical specifications on dimensions, optics, adjustments, and environmental properties are provided for the Stratos rifle scope. Available configurations including turret types, the new programmable illumination technology, and reticle options are also listed.
Instructions SCHMIDT & BENDER 5-20x50 PM II Ultra Short Single Turn | Optics ...Optics-Trade
This document provides an operating manual for the Schmidt & Bender 5-20x50 PMII Ultra Short scope. It includes sections on scope description and technical data, accessories, operating instructions, point of impact correction, maintenance, and warranty. The technical data section specifies optical and physical characteristics such as the magnification range of 5-20x, 50mm objective lens, 90mm eye relief, and 862g weight. The operating instructions section describes adjusting the diopter and parallax, as well as using the reticle for distance estimation.
Prospect KAHLES K 624 TT | Optics Trade | 2012Optics-Trade
The document discusses the K624 TT scope from KAHLES. It has a 6-24x magnification range, 56mm objective lens, and provides distortion-free images with a wide field of view. Key features include nearly loss-free light transmission around 520 nanometers thanks to optimized coatings, and high-quality reticles that maintain precision at long distances by remaining the same size in the second focal plane. The scope has absolute repetition-exact mechanics and parallax adjustment for high precision shooting.
Technical data | C-More C3 Riflescopes | Optics TradeOptics-Trade
The document describes the C-MORE Systems C3 1-6x24 rifle scope. It has a TJ1I reticle designed for fast target acquisition at multiple distances up to 800 yards. The reticle is illuminated and has markings for windage and ranging. The scope has lockable turrets, is nitrogen filled, and coated optics for clarity. It is designed for AR platforms and competition shooting.
Schmidt & Bender scopes of the PM line have been developed in close cooperation with special forces and police experts to be reliable in all environments and conditions. They offer suitable scopes for short to long distance precision shooting mounted on rifles or .50 caliber weapons. The scopes have durable construction, clear optics, precise adjustments, and features for safety, accuracy and low light usage. The 1-8x24 PM Short-Dot model expands the range of the 1.1-4x20 model with increased magnification while maintaining the 30mm main tube compatibility. The 3-20x50 PMII scope provides high flexibility with its magnification range and adjustment capabilities.
Instructions SCHMIDT & BENDER 5-20x50 PM II Ultra Short Double Turn | Optics ...Optics-Trade
The document is an operating manual for the Schmidt & Bender 5-20x50 PMII Ultra Short scope. It provides details on the scope's specifications, accessories, operating instructions, and maintenance. Key points covered include adjusting the diopter and parallax settings, using the reticle to estimate distances, and correcting point of impact using the elevation and windage turrets. Safety instructions warn against looking at the sun or lasers with the scope and avoiding shocks beyond normal use.
Technical data AIMPOINT 9000SC | Optics TradeOptics-Trade
The 9000SC sight is designed for short-barreled firearms like semi-automatic shotguns and rifles. It is also suitable for combination guns and pistols with heavy recoil. The 9000SC is compact at 160mm long and mounts on standard 30mm rings, making it versatile. It has unlimited eye relief, is water resistant to 15 feet, and can operate for 50,000 hours on a single battery using Aimpoint's Advanced Circuit Efficiency Technology.
Technical data AIMPOINT Hunter Series | Optics Trade | 2014Optics-Trade
This document describes the features and specifications of Aimpoint's Hunter series of red dot sights. The Hunter series includes the H30S, H30L, H34S, and H34L models, which have 30mm or 34mm diameter tubes and short or long lengths. Key features include a clean modern design, advanced electronics for 50,000 hours of use from a single battery, fully waterproof construction, and fast target acquisition without magnification. The sights are designed for hunting on rifles, shotguns, and other firearms in all weather and light conditions.
Technical data AIMPOINT 3XMag | Optics TradeOptics-Trade
The 3XMag magnifying module is designed to be mounted behind Aimpoint sights. It provides 3x magnification, allowing shooters to engage targets at extended ranges while maintaining close quarters battle capability. By combining with Aimpoint's Twist-Mount system, the 3XMag allows users to quickly switch between magnified semi-sniping and non-magnified close quarters simply by twisting the module. It is ideal for perimeter security, sniper support, and can also be used as a handheld monocular.
The Burris Eliminator III LaserScope combines a riflescope, laser rangefinder, and ballistic trajectory compensation. It automatically calculates the exact holdover point for shots out to 1,200 yards based on the shooter's entered ballistic data. New features on the latest model include a remote cable switch for easier ranging and integrated inclinometer to adjust for uphill/downhill shots. Setup is simple, only requiring the shooter to enter the bullet drop number and ballistic coefficient specific to their ammunition. The Eliminator III significantly extends the effective range and accuracy of a rifle with minimal guesswork.
This document provides instructions for use and maintenance of a Nikon P-223 riflescope. It includes specifications for the 3x32 and 3-9x40 models, diagrams labeling parts, and procedures for focusing the reticle, adjusting magnification, zeroing the turrets, and cleaning the lenses and exterior of the scope. The document also provides information on Nikon scope service locations and cautions against looking at the sun through the scope or submerging the scope in water for more than 10 minutes.
This document is a catalog for various types of pliers and tools. It provides information on pliers basics, including jaw shapes, joint connections, wire classes, cutting capabilities, and safety instructions. The catalog also lists specific pliers and tools, including their article numbers, features, intended uses, and specifications. It serves as a reference for selecting the appropriate plier or tool for a given application.
Technical data AIMPOINT CompM3 | Optics TradeOptics-Trade
The CompM3 is a revolutionary sight created by Aimpoint for use by police and armed forces personnel. It incorporates over 30 years of design innovations and the latest technology from Aimpoint, including a battery that provides 50,000 hours of operation. The CompM3 is rugged and can withstand extreme conditions, while its features make it compatible with night vision devices and provide a clear sight picture.
This document provides sizing guides and specifications for various LED lighting modules and lightboxes. It includes guides for the Gamma and Delta series modules listing lightbox depth, module pitch, and pieces per square meter. It also lists the specifications such as dimensions, beam angle, luminous flux, and power for individual LED modules. The document provides estimated prices for various ready-made illuminated lightbox frames and roller shutter series. It concludes with specifications and list prices for flexible LED strips, power supplies, and general pricing information.
1) The document provides specifications and operating instructions for the Trijicon Credo riflescope. It describes the different models and their key features such as magnification range, objective lens size, eye relief, and adjustment capabilities.
2) The document provides instructions on how to install batteries, zero the riflescope, adjust the brightness settings and diopter, and set the return to zero function.
3) Specifications for each riflescope model are displayed in an easy-to-reference table that lists the various optical and physical characteristics.
This document provides an overview of Trijicon's riflescope and optics catalog, including their magnified optics, reflex sights, iron sights, and electro-optics and archery products. It summarizes Trijicon's history of innovation in optical sighting systems since 1981, describes the science behind their product testing and durability, and provides specifications for their various product lines including the ACOG, VCOG, RMR, and others.
Helmut Schmidt and Helmut Bender founded Schmidt & Bender in 1957 with a passion for crafting high-quality rifle scopes. Over 50 years later, Schmidt & Bender focuses solely on rifle scope production, applying innovative optical technologies and craftsmanship to their Classic and Zenith line scopes. Their dedication to quality has made Schmidt & Bender rifle scopes a trusted brand among hunters worldwide.
Instructions SCHMIDT & BENDER 5-20x50 PM II Ultra Short Single Turn | Optics ...Optics-Trade
This document provides an operating manual for the Schmidt & Bender 5-20x50 PMII Ultra Short scope. It includes sections on scope description and technical data, accessories, operating instructions, point of impact correction, maintenance, and warranty. The technical data section specifies optical and physical characteristics such as the magnification range of 5-20x, 50mm objective lens, 90mm eye relief, and 862g weight. The operating instructions section describes adjusting the diopter and parallax, as well as using the reticle for distance estimation.
Prospect KAHLES K 624 TT | Optics Trade | 2012Optics-Trade
The document discusses the K624 TT scope from KAHLES. It has a 6-24x magnification range, 56mm objective lens, and provides distortion-free images with a wide field of view. Key features include nearly loss-free light transmission around 520 nanometers thanks to optimized coatings, and high-quality reticles that maintain precision at long distances by remaining the same size in the second focal plane. The scope has absolute repetition-exact mechanics and parallax adjustment for high precision shooting.
Technical data | C-More C3 Riflescopes | Optics TradeOptics-Trade
The document describes the C-MORE Systems C3 1-6x24 rifle scope. It has a TJ1I reticle designed for fast target acquisition at multiple distances up to 800 yards. The reticle is illuminated and has markings for windage and ranging. The scope has lockable turrets, is nitrogen filled, and coated optics for clarity. It is designed for AR platforms and competition shooting.
Schmidt & Bender scopes of the PM line have been developed in close cooperation with special forces and police experts to be reliable in all environments and conditions. They offer suitable scopes for short to long distance precision shooting mounted on rifles or .50 caliber weapons. The scopes have durable construction, clear optics, precise adjustments, and features for safety, accuracy and low light usage. The 1-8x24 PM Short-Dot model expands the range of the 1.1-4x20 model with increased magnification while maintaining the 30mm main tube compatibility. The 3-20x50 PMII scope provides high flexibility with its magnification range and adjustment capabilities.
Instructions SCHMIDT & BENDER 5-20x50 PM II Ultra Short Double Turn | Optics ...Optics-Trade
The document is an operating manual for the Schmidt & Bender 5-20x50 PMII Ultra Short scope. It provides details on the scope's specifications, accessories, operating instructions, and maintenance. Key points covered include adjusting the diopter and parallax settings, using the reticle to estimate distances, and correcting point of impact using the elevation and windage turrets. Safety instructions warn against looking at the sun or lasers with the scope and avoiding shocks beyond normal use.
Technical data AIMPOINT 9000SC | Optics TradeOptics-Trade
The 9000SC sight is designed for short-barreled firearms like semi-automatic shotguns and rifles. It is also suitable for combination guns and pistols with heavy recoil. The 9000SC is compact at 160mm long and mounts on standard 30mm rings, making it versatile. It has unlimited eye relief, is water resistant to 15 feet, and can operate for 50,000 hours on a single battery using Aimpoint's Advanced Circuit Efficiency Technology.
Technical data AIMPOINT Hunter Series | Optics Trade | 2014Optics-Trade
This document describes the features and specifications of Aimpoint's Hunter series of red dot sights. The Hunter series includes the H30S, H30L, H34S, and H34L models, which have 30mm or 34mm diameter tubes and short or long lengths. Key features include a clean modern design, advanced electronics for 50,000 hours of use from a single battery, fully waterproof construction, and fast target acquisition without magnification. The sights are designed for hunting on rifles, shotguns, and other firearms in all weather and light conditions.
Technical data AIMPOINT 3XMag | Optics TradeOptics-Trade
The 3XMag magnifying module is designed to be mounted behind Aimpoint sights. It provides 3x magnification, allowing shooters to engage targets at extended ranges while maintaining close quarters battle capability. By combining with Aimpoint's Twist-Mount system, the 3XMag allows users to quickly switch between magnified semi-sniping and non-magnified close quarters simply by twisting the module. It is ideal for perimeter security, sniper support, and can also be used as a handheld monocular.
The Burris Eliminator III LaserScope combines a riflescope, laser rangefinder, and ballistic trajectory compensation. It automatically calculates the exact holdover point for shots out to 1,200 yards based on the shooter's entered ballistic data. New features on the latest model include a remote cable switch for easier ranging and integrated inclinometer to adjust for uphill/downhill shots. Setup is simple, only requiring the shooter to enter the bullet drop number and ballistic coefficient specific to their ammunition. The Eliminator III significantly extends the effective range and accuracy of a rifle with minimal guesswork.
This document provides instructions for use and maintenance of a Nikon P-223 riflescope. It includes specifications for the 3x32 and 3-9x40 models, diagrams labeling parts, and procedures for focusing the reticle, adjusting magnification, zeroing the turrets, and cleaning the lenses and exterior of the scope. The document also provides information on Nikon scope service locations and cautions against looking at the sun through the scope or submerging the scope in water for more than 10 minutes.
This document is a catalog for various types of pliers and tools. It provides information on pliers basics, including jaw shapes, joint connections, wire classes, cutting capabilities, and safety instructions. The catalog also lists specific pliers and tools, including their article numbers, features, intended uses, and specifications. It serves as a reference for selecting the appropriate plier or tool for a given application.
Technical data AIMPOINT CompM3 | Optics TradeOptics-Trade
The CompM3 is a revolutionary sight created by Aimpoint for use by police and armed forces personnel. It incorporates over 30 years of design innovations and the latest technology from Aimpoint, including a battery that provides 50,000 hours of operation. The CompM3 is rugged and can withstand extreme conditions, while its features make it compatible with night vision devices and provide a clear sight picture.
This document provides sizing guides and specifications for various LED lighting modules and lightboxes. It includes guides for the Gamma and Delta series modules listing lightbox depth, module pitch, and pieces per square meter. It also lists the specifications such as dimensions, beam angle, luminous flux, and power for individual LED modules. The document provides estimated prices for various ready-made illuminated lightbox frames and roller shutter series. It concludes with specifications and list prices for flexible LED strips, power supplies, and general pricing information.
1) The document provides specifications and operating instructions for the Trijicon Credo riflescope. It describes the different models and their key features such as magnification range, objective lens size, eye relief, and adjustment capabilities.
2) The document provides instructions on how to install batteries, zero the riflescope, adjust the brightness settings and diopter, and set the return to zero function.
3) Specifications for each riflescope model are displayed in an easy-to-reference table that lists the various optical and physical characteristics.
This document provides an overview of Trijicon's riflescope and optics catalog, including their magnified optics, reflex sights, iron sights, and electro-optics and archery products. It summarizes Trijicon's history of innovation in optical sighting systems since 1981, describes the science behind their product testing and durability, and provides specifications for their various product lines including the ACOG, VCOG, RMR, and others.
Helmut Schmidt and Helmut Bender founded Schmidt & Bender in 1957 with a passion for crafting high-quality rifle scopes. Over 50 years later, Schmidt & Bender focuses solely on rifle scope production, applying innovative optical technologies and craftsmanship to their Classic and Zenith line scopes. Their dedication to quality has made Schmidt & Bender rifle scopes a trusted brand among hunters worldwide.
Anexo c do guia do aluno comanf 2012 folha de orientação de estudoFalcão Brasil
Este documento fornece uma folha de orientação de estudo para uma prova de nivelamento para alunos. Ele lista os tópicos a serem estudados agrupados em seis seções principais: 1) Primeiros Socorros, 2) Topografia, 3) Armamento, 4) Patrulhas, 5) Comunicações e Equipamentos de Visão Noturna, e 6) Nós e Voltas. Para cada tópico, fornece referências específicas nos manuais a serem consultados para estudo. Além disso, fornece informações sobre
MANUAL DE CAMPANHA SERVIÇO DA PEÇA DO OBUSEIRO 155 mm M109 A3 C 6-86Falcão Brasil
Este documento descreve o manual de operações do obuseiro autopropulsado M109 A3 das Forças Armadas brasileiras. Ele fornece instruções sobre o funcionamento, manutenção e emprego da arma, incluindo composição da guarnição, procedimentos de tiro direto e indireto, transporte do equipamento e resolução de problemas.
MANUAL DE CAMPANHA FORTIFICAÇÕES DE CAMPANHA C 5-15Falcão Brasil
Este documento é um manual sobre fortificações de campanha do exército brasileiro. Ele fornece instruções sobre a construção de trincheiras, abrigos, campos de minas e obstáculos para proteger posições militares. O manual descreve prioridades, ferramentas, materiais e técnicas para fortificar posições de forma rápida e eficiente em contato com o inimigo.
RELAÇÃO DOS MANUAIS DE CAMPANHA (C) E INSTRUÇÕES PROVISÓRIAS (IP)Falcão Brasil
Este documento fornece uma lista dos Manuais de Campanha e Instruções Provisórias do Exército Brasileiro, organizados por série temática. A lista contém 199 itens, cobrindo diversas áreas como engenharia, artilharia, infantaria, logística e operações especiais. O documento tem como objetivo manter militares e órgãos atualizados sobre a doutrina do Exército.
This 3 page document is a reticle data sheet from Schmidt & Bender GmbH & Co. KG for a 5-25x56 focal plane scope. It provides information on the different markings and their meanings in centimeters/100m, inches/100yd, and mrad at the lowest and highest magnifications. The data sheet also lists the scope model number, type, and other specifications.
1. O documento descreve a história da Força Expedicionária Brasileira (FEB) que combateu na Segunda Guerra Mundial na Campanha da Itália. 2. Após navios mercantes brasileiros serem torpedeados, o Brasil abandona a neutralidade e declara guerra à Alemanha e à Itália em 1942. 3. Soldados brasileiros são convocados e passam por treinamento rigoroso antes de atravessar o Atlântico e chegar ao cenário de guerra na Itália em 1944.
Profº. Marcelo Santos Chaves - Cálculo I (Limites e Continuidades) - Exercíci...MarcelloSantosChaves
1. The document discusses limits and continuities. It provides solutions to calculating the limits of 6 different functions as x approaches certain values.
2. The solutions involve algebraic manipulations such as factoring, simplifying, and applying limit properties. Various limit results are obtained such as 1, -6, 0.
3. The techniques demonstrated include making substitutions to simplify indeterminate forms, factoring, and taking limits of rational functions as the variables approach certain values.
MANUAL DE CAMPANHA SERVIÇO DA PEÇA DO EDT FILA 1º VOLUME C 44-61Falcão Brasil
Este documento apresenta o manual de campanha C 44-61 do Exército Brasileiro sobre o serviço da peça do Equipamento de Direção de Tiro FILA. O manual fornece instruções sobre a operação, manutenção e emprego do EDT FILA, incluindo características técnicas do equipamento, formação da guarnição, medidas de segurança, sensores e modos de designação, simulador de treinamento e reconhecimento de posições.
MANUAL DE CAMPANHA O APOIO DE ENGENHARIA NO ESCALÃO BRIGADA C 5-10Falcão Brasil
Este documento apresenta o manual de campanha C 5-10 que fornece orientação para o emprego das companhias de engenharia de combate das brigadas do Exército Brasileiro. Descreve as missões, organização, possibilidades e limitações destas unidades no escalão brigada, bem como aspectos comuns a todas as companhias de engenharia.
MANUAL DE CAMPANHA ESTADO-MAIOR E ORDENS 2º VOLUME C 101-5Falcão Brasil
Este documento aprova o Manual de Campanha C 101-5 - Estado-Maior e Ordens - 1o e 2o Volumes, 2a Edição, 2003, revogando as instruções anteriores. O manual fornece informações sobre as atividades e responsabilidades dos oficiais de estado-maior em diversas áreas como pessoal, inteligência, operações e logística.
MANUAL DE CAMPANHA SERVIÇO DA PEÇA DO EDT FILA 2º VOLUME C 44-61Falcão Brasil
O documento apresenta rotinas operacionais para preparar o Exército de Defesa de Tanque (EDT) para operação, incluindo levantar a proteção, ligar o gerador, posicionar o sistema de armas e ligar o EDT. Há instruções detalhadas para cada membro da tripulação sobre suas tarefas nessas rotinas. O Anexo A contém uma folha de avaliação de simulador de treinamento e os Anexos B-E contêm tabelas de referência para o EDT.
MANUAL DE CAMPANHA BATERIA DE LANÇADORES MÚLTIPLOS DE FOGUETES C 6-16Falcão Brasil
Este documento é um manual de campanha para baterias de lançadores múltiplos de foguetes do Exército Brasileiro. O manual fornece orientações sobre o comando, organização, operações ofensivas e defensivas, técnicas de tiro e logística de uma bateria de lançadores múltiplos de foguetes. O documento está organizado em doze capítulos tratando de tópicos como comando, emprego tático, busca de alvos, comunicações, planejamento de fogos e apo
O documento discute as características e funcionamento de armas curtas, com foco no revolver e na pistola semi-automática. Primeiro, define armas de fogo e classifica-as. Em seguida, descreve a origem e evolução das armas curtas, incluindo o revolver e a pistola. Por fim, detalha as principais partes, funcionamento, manutenção e operação do revolver e da pistola semi-automática.
INSTRUÇÕES PROVISÓRIAS BASES PARA A MODERNIZAÇÃO DA DOUTRINA DE EMPREGO DA FO...Falcão Brasil
O documento apresenta as bases para a modernização da doutrina de emprego da força terrestre brasileira (Doutrina Delta), destacando a necessidade de atualização dos conceitos doutrinários para acompanhar as novas capacidades da força terrestre e as necessidades do combate moderno, caracterizado por ações simultâneas em toda a profundidade do campo de batalha, busca do isolamento do inimigo e destruição de sua força, com ênfase em manobras de flanco.
MANUAL DE CAMPANHA A ENGENHARIA DIVISIONÁRIA C 5-31Falcão Brasil
Este documento descreve a organização e missão da engenharia divisionária do Exército Brasileiro. A engenharia divisionária tem a missão de apoiar as operações da divisão de exército, realizando trabalhos de engenharia para garantir mobilidade e proteção. Sua estrutura inclui batalhões de engenharia de combate, estado-maior e companhia de comando. O comandante da engenharia divisionária exerce dupla função, comandando as tropas e assessorando o comando da divisão em assuntos técnicos
INSTRUÇÕES PROVISÓRIAS OPERAÇÕES CONTRA DESEMBARQUE ANFÍBIO IP 31-10Falcão Brasil
Este documento apresenta as instruções provisórias do Exército Brasileiro sobre operações contra desembarque anfíbio. Ele define conceitos e doutrina para orientar a Força Terrestre nesse tipo de operação, abordando temas como operações navais, defesa do litoral, desembarque anfíbio inimigo e ações contra ele, apoio de fogo e outros apoios necessários.
Instructions SCHMIDT & BENDER 5-20x50 PM II Ultra Short Illuminated Double Tu...Optics-Trade
The document is an operating manual for the Schmidt & Bender 5-20x50 PMII Ultra Short scope. It provides technical specifications and instructions for use, including adjusting parallax and focus, illumination settings, battery replacement, using elevation and windage turrets for point of impact correction, and preliminary sighting-in procedures. Safety instructions warn never to look at the sun or laser with the scope and to avoid shocks beyond normal use.
Instructions SCHMIDT & BENDER 5-20x50 Ultra Short Illuminated Single Turn | O...Optics-Trade
The document is an operating manual for the Schmidt & Bender 5-20x50 PMII Ultra Short scope. It includes sections on scope description, technical specifications, accessories, operating instructions, point of impact correction, maintenance, and warranty. The operating instructions section describes adjusting the diopter and parallax, operating the illuminated reticle, and changing the battery. The technical specifications include the magnification range, objective lens size, eye relief, weight and dimensions.
Instructions SCHMIDT & BENDER 5-25x56 PM II PSR Illuminated Double Turn | Opt...Optics-Trade
This document provides an operating manual for the Schmidt & Bender 5-25x56PMII PSR scope. It includes technical specifications, operating instructions, and maintenance guidance. Key information includes magnification range of 5-25x, objective lens diameter of 56mm, and adjustable features like diopter, parallax compensation, and illuminated reticle control. Detailed instructions are provided for adjusting focus, zeroing the reticle position, and replacing batteries. Maintenance tips emphasize using covers and storing the scope properly.
Instructions SCHMIDT & BENDER 5-25x56 PM II PSR Double Turn | Optics TradeOptics-Trade
This document is an operating manual for the Schmidt & Bender 5-25x56PMII PSR riflescope. It provides details on the scope's specifications, accessories, controls and adjustments. The manual explains how to adjust the diopter and parallax settings, set the elevation and windage turrets, and care for the scope. It provides safety instructions and guidelines for proper use to optimize accuracy and prevent eye injury when operating the riflescope.
The document is an operating manual for the Schmidt & Bender 1.5-8x42 Stratos riflescope. It provides details on the scope's specifications and technical data, accessories, illumination settings and controls, battery replacement, and adjusting the scope for sighting in. The manual explains how to focus the reticle, control the illumination system which has multiple brightness settings and modes, and make windage and elevation adjustments using the Posicon turrets.
This 20-page operating manual provides instructions for the Schmidt & Bender 1.1-5x24 Stratos riflescope. It includes details on the scope's specifications, accessories, illumination settings, and adjustment instructions. The manual explains how to adjust the diopter and illumination settings, set the reticle focus, and fine tune the scope for accuracy. It also provides safety warnings and maintenance tips to help users properly operate and care for the riflescope.
The document describes the new Blaser B2 riflescope line, which is optimized for day and night hunting. The B2 riflescopes are compact in size for use with clip-on night vision devices. They have multiple magnification options between 1-6x, 2-12x, and 2.5-15x. Accessories like flip covers, attachment mounts, and a quick distance control ring allow the scopes to be used for both day and night hunting on different rifles. The document provides details on the technical specifications, features, and accessories of the B2 riflescope models.
This document provides information about red dot sights manufactured by Aimpoint, including their Micro series sights. It summarizes the key features and benefits of Aimpoint sights such as long battery life, durability to withstand harsh conditions, and fast target acquisition. It also provides product specifications and details on mounting solutions for the Micro sights to fit various firearm platforms.
Instruction Manual | Burris Fastfire C | Optics TradeOptics-Trade
This document is a user manual for the Burris FastFire C red dot reflex sight. It provides specifications and instructions for installing, operating and adjusting the sight. Key features include its compact size, 1x magnification, 6 MOA red dot, automatic brightness adjustment, 80 MOA of elevation and windage adjustment, included rear post sight, and lifetime warranty. The manual describes installing batteries, mounting the sight, operating modes, zeroing the point of impact, and basic care instructions.
Technical data AIMPOINT Micro T-2 | Optics TradeOptics-Trade
The Micro T-2 is a compact reflex sight from Aimpoint that offers performance of full-sized sights in a small package. It can be mounted on nearly any weapon and operates for over 5 years on a single battery. The Micro T-2 has advanced optical lenses and coatings that provide a clear 2 MOA red dot. It is waterproof to 25 meters and can withstand extreme conditions while remaining easy for users to operate.
The document provides instructions for using a Nikon riflescope. It begins by explaining how to send the riflescope for service if needed. It then provides specifications for different riflescope models and details on mounting the scope, adjusting the reticle, magnification settings, and maintaining the scope. The document emphasizes safely following instructions to properly use and care for the riflescope.
This document is a user manual for Aimpoint hunter sights. It provides specifications for the sights, describes their features like the red dot and brightness adjustment, and gives instructions for operation, mounting to a weapon, zeroing, and maintenance. The manual outlines the warranty, which is 2 years for professional use and 10 years for personal use. It also provides troubleshooting tips for issues like the dot not appearing or being impossible to zero. The document provides detailed steps for installing the sight, adjusting brightness and zeroing the sight on a weapon while emphasizing safety procedures.
This document provides instructions and specifications for the Primary Arms SLx MD-25 Micro Red Dot sight. It includes directions for mounting the sight, adjusting brightness and focus, zeroing the sight, and specifications for dot size, battery life, and warranty. The sight has 11 brightness settings including 2 for night vision and provides a 50,000 hour battery life for the 2 MOA dot reticle. It comes with different height mounting options and can be used with magnifiers.
Technical data AIMPOINT Patrol Rifle Optic | Optics TradeOptics-Trade
The Aimpoint Patrol Rifle Optic (PRO) is designed for use by law enforcement in challenging conditions. It incorporates new features in a complete "ready to go" kit, including a high-efficiency circuit allowing it to run for up to three years on a single battery. The front lens has a unique coating allowing compatibility with night vision devices. The modular mount indexes the sight at the optimal height and can be removed to enable use on shotguns or submachine guns. Both lenses are recessed for protection from damage or fingerprints.
25kV Cable Joints & Cable Terminations
3M Cold Shrink High Voltage Cable Joints and Cable Terminations carry Network Rail approvals for 6.35/11kV, 25kV and 19/33kV polymeric power cables. Prysmian 25kV single core power cables are used to carry 25kV electrical power supplies from Network Rail track-side switching stations to the overhead line equipment on A.C. electrified lines. T&D UK provide on-going 25kV cable jointer training either in house or on site for 3M Cold Shrink joints and terminations.
High Voltage Rail Cable Joints & Cable Terminations - 6.35/11kV, 12.7/22kV and 19/33kV cables distribute three phase A.C. electrical power supplies at nominal system voltages of 11kV, 22kV and 33kV to Network Rail traction substations on D.C. electrified lines. 25kV two core concentric cables are mainly used to deliver 25kV single phase electrical power supplies, typically, to Network Rail feeder stations on A.C. electrified lines. 25kV single core cables are mainly used to carry 25kV electrical power supplies from Network Rail track-side switching stations to the overhead line equipment on A.C electrified lines - T&D stock heat shrink and cold shrink cable joints and terminations for all these rail cable applications.
Instruction Manual | EOTech Vudu X 2-12x40 | Optics TradeOptics-Trade
The document provides instructions for use and maintenance of EOTECH's 2-12x40 SFP Vudu X precision riflescope. It details the riflescope's features including its reticles, adjustments for magnification, focus, illumination and windage/elevation. It also provides steps for battery replacement, mounting, bore sighting, zeroing and cleaning the riflescope.
This document discusses industrial encoders and tachometers from Nidec Avtron Automation for providing feedback and instrumentation in drive systems and machine control. It provides an overview of encoder selection factors like mounting style and durability ratings. It also summarizes the different encoder technologies available, including optical and magnetic sensing, as well as incremental and absolute encoding. Application examples and product specifications are given for a range of encoder models suited to different industrial environments and hazardous duty applications.
Workshop - Voorkomen van faling door vibraties - mechanical interactionSirris
The document discusses vibration guidelines for integrating electronics into products. It describes:
1) The need for vibration guidelines to address failures caused by vibration during product use.
2) The current version of vibration guidelines that provide a methodology to estimate fixation points and stiffeners needed prior to PCB layout.
3) Tools available to analyze board vibration and failure mitigation techniques for various component types.
Similar to Instructions SCHMIDT & BENDER 3-20x50 PM II Ultra Short Illuminated Double Turn | Optics Trade (20)
Technical Data | ThermTec Wild 325 | Optics TradeOptics-Trade
The Wild 325 is a thermal imaging monocular with 384*288 thermal resolution and an NETD of less than 18mk. It features automatic object detection, AI distance measurement, 1x-4x digital zoom, various pseudo colors, joystick control, a large aperture, 1024*768 OLED display, 10 hour battery life, and forest/target outline modes. Weighing 470g and measuring 190.2x69.3x58.7mm, it is used for night hunting, observation, rescue operations, and hiking while coming with accessories like a monocular, lanyard, lens cloth, manual, bag, USB cable, hand strap, charger, and two lithium batteries.
Wild Series Thermal Imaging Monocular User Manual outlines key features and functions of the device. It has an uncooled infrared detector with less than 18mk NETD, 1x-4x digital zoom, various detection modes including AI and laser rangefinder combination. The manual covers device operation including charging, power on/off, button functions, menu settings, capture and recording functions. Technical specifications and regulatory information are also provided.
Technical Data | ThermTec Hunt 335 | Optics TradeOptics-Trade
The Thermal Clip-On Hunt335 is a 384*288 thermal resolution clip-on device with 0.39-inch OLED display, magnesium alloy housing, and lightweight compact design. It has features like self-learning image correction, ultra-long image stability, automatic object detection and distance measurement, various display modes, up to 7 hours battery life, and wireless remote control and app connectivity. It is intended for night hunting and observation applications.
The document is a user manual for ThermTec's Hunt Series thermal clip-on device. It provides instructions on safely using the device, including not pointing it at intense heat sources. It also details features like the 12μm thermal imaging detector, 1024x768 resolution OLED display, and IP67 protection rating. The manual covers device components, menu operation, recording and sharing capabilities, and maintenance guidelines.
Flyer | Guide DN Series Handheld Digital Binoculars | Optics TradeOptics-Trade
The DN30 is a handheld digital binocular featuring 4K resolution imaging, day and night usage capabilities, and WIFI connectivity. It uses a 3840x2160 CMOS sensor and 1920x1080 AMOLED displays to provide high-quality color images in daylight and infrared images at night. Additional features include laser rangefinding up to 600 meters, IP67 waterproofing, and over 6 hours of battery life. The DN30 is suitable for outdoor observation, law enforcement, night hunting, and search and rescue applications.
Instruction Manual | Pard FD1 Digital NV Front Attachment | Optics TradeOptics-Trade
This document provides installation and operation instructions for a digital night vision front clip-on device. It includes steps for unboxing the device, installing the battery, powering on the device, and installing the adapter to attach the device to a rifle scope. The document provides details on the device's components and specifications, as well as precautions for use and storage.
Instruction Manual | EOTech Vudu X 1-6x24 | Optics TradeOptics-Trade
The document provides instructions for use and maintenance of EOTECH's 1-6x24 SFP Vudu X riflescope. It describes the riflescope's features such as its magnification range of 1-6x, adjustable reticles, and illumination settings. It then provides directions for adjusting the magnification, reticle focus, illumination, and windage/elevation turrets. The document also includes guidelines for re-indexing the turret dials, replacing batteries, mounting the riflescope, achieving proper eye relief, and installing the quick throw lever.
Instruction Manual | Nightforce CFS 6-36x50 F1 | Optics TradeOptics-Trade
The document is an owner's manual for a Nightforce Configurable Field Spotting Scope (CFS) 6-36x50mm F1. It contains 3 sentences:
The manual provides instructions for use, maintenance, and warranty information for the Nightforce CFS 6-36x50mm spotting scope, including focusing the image, adjusting magnification and diopter settings, mounting on a tripod, and installing optional accessory cages and rails. Key features of the spotting scope such as the rapid focus ring, magnification ring, and integrated dovetail base are described along with what is included in the product box and proper lens cap usage. Safety warnings and export restrictions are also noted at the beginning.
The document provides instructions for use and care of an Athlon spotting scope. It details how to mount the scope to a tripod, adjust the eyecup and magnification, focus the reticle and scope, use the sunshade, and care for the lenses. It also provides information on the reticle including how to use it for ranging targets at different distances.
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...Zilliz
Join us to introduce Milvus Lite, a vector database that can run on notebooks and laptops, share the same API with Milvus, and integrate with every popular GenAI framework. This webinar is perfect for developers seeking easy-to-use, well-integrated vector databases for their GenAI apps.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...SOFTTECHHUB
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...Neo4j
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Building RAG with self-deployed Milvus vector database and Snowpark Container...Zilliz
This talk will give hands-on advice on building RAG applications with an open-source Milvus database deployed as a docker container. We will also introduce the integration of Milvus with Snowpark Container Services.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!SOFTTECHHUB
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Generative AI Deep Dive: Advancing from Proof of Concept to ProductionAggregage
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
4. Operating Manual
3-20x50 PMII Ultra Short
Page 4 of 25
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
1. Scope description ..................................................................6
1.1 Introduction ............................................................................................... 6
1.2 Safety instructions ..................................................................................... 6
2. Technical data...............................................................................................7
2.1 General data............................................................................................. 7
2.2 Dimensions ................................................................................................. 7
3. Accessories / Scope of supply.....................................................................8
4. Operating instructions ...................................................................................9
4.1 Adjusting the image focus with the diopter adjustment of the
eyepiece................................................................................................................ 10
4.2 Parallax adjustment................................................................................ 10
4.3 Illumination control ................................................................................. 11
4.4 Changing the battery............................................................................ 12
4.5 Using the reticle for the distance estimation ..................................... 13
5. Point of impact correction ..........................................................................15
5.1 Using the elevation turret and the windage turret.......................... 15
5.2 Preliminary adjusting and fine adjusting when sighting in............... 17
5.3 Elevation adjustment ............................................................................. 19
5.4 Windage adjustment ............................................................................. 20
6. Maintenance................................................................................................21
6.1 Using the scope covers.......................................................................... 21
6.2 Care and maintenance........................................................................ 21
6.3 Storage temperature ............................................................................. 21
7. Warranty certificate.....................................................................................22
5.
6. Operating Manual
3-20x50 PMII Ultra Short
Page 6 of 25
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
1. Scope description
1.1 Introduction
The Schmidt & Bender PM II series scopes are designed to meet the unique
challenges of high precision shooting. Their quality and function make it
possible to achieve exceptional shooting results as well as to fulfill the critical
and demanding needs of official, law enforcement and tactical applications.
Strict observation of the following operating instructions is prerequisite for
successful long-term use.
1.2 Safety instructions
Never look into the sun or into laser light with the scope. This may cause serious
eye injuries. Do not tamper with the scope. Any repairs beyond the
maintenance described in the maintenance manual should only be
performed by Schmidt & Bender or by other specialists authorized by Schmidt
& Bender. Protect the scope against shocks beyond normal use.
Avoid unnecessary long exposure of the scope to direct sunlight; intense and
excessive sun radiation will cause extremely high temperatures inside the tube
which may be detrimental to the scope.
The scope must be properly mounted to the firearm by a qualified specialist.
Perfect mounting is an essential requirement for maximum accuracy and
efficient functioning of the firearm and the scope. Be sure to assume the
proper firing position and keep a correct eye relief in order to obtain an
optimal full field of view and to avoid any injuries due to the recoil of the
weapon.
7. Operating Manual
3-20x50 PMII Ultra Short
Page 7 of 25
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
2. Technical data
2.1 General data
Field of view - 13 – 2,1 (m/100m)
Exit pupil - 11,4 – 2,5 (mm)
Eye relief - 90 (mm)
Twilight factor - 10,1 – 31,6
Transmission - 90 (%)
Diopter adjustment - +2 to -3 (dptr)
Parallax adjustment - 25 - ∞ (m)
Weight - 860 (g)
2.2 Dimensions
Illustr. 1: Dimensions of the scope in mm
8. Operating Manual
3-20x50 PMII Ultra Short
Page 8 of 25
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
3. Accessories / Scope of supply
Some of the listed accessories are delivered with the scope while optional
accessories are marked with a (*). All parts can be ordered by the listed part
numbers.
Lens Cleaning Kit - 971-90
Objective cap(*) - 971-641
Killflash (*) - 971-61
Eyepiece cap (*) - 971-642
Sunshade black (*) - 917-45150
Sunshade RAL 8000 (*) - 917-45150-45
Sunshade Pantone (*) - 917-45150-46
Yellow filter (*) - 971-6441
Grey filter (*) - 971-6442
2mm allen key - 400-23
Transport bag RAL 8000 (small) (*) - 971-065
Transport bag black (small) (*) - 971-064
Registration card, Reply card, Scope label
9. Operating Manual
3-20x50 PMII Ultra Short
Page 9 of 25
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
4. Operating instructions
Illustr. 2: Scope parts and controls
10. Operating Manual
3-20x50 PMII Ultra Short
Page 10 of 25
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
4.1 Adjusting the image focus with the diopter adjustment of the
eyepiece
The eyepiece provides the adjustment of the reticle focus to the individual
eye diopter. Set the scope to the highest magnification. Rotate the eyepiece
counterclockwise until it stops. Rotate the eyepiece clockwise until you see a
sharp image of the reticle (see Illustr. 3).
Illustr. 3: Diopter adjustment
4.2 Parallax adjustment
The 3-20x50 PMII Ultra Short scope provides parallax compensation with an
easily operable setting wheel
(Illustr. 4), positioned as a third turret opposite the windage adjustment. With
this turret the shooter may easily focus targets at any distance without having
to interrupt his target acquisition.
The parallax adjustment turret is engraved with distance markings. If the
distance to the target is known rotate the turret so that the corresponding
distance marking lines up with the index mark on the saddle.
11. Operating Manual
3-20x50 PMII Ultra Short
Page 11 of 25
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
If the distance to the target is not known set the scope to the highest
magnification and then move the adjustment ring of the parallax
compensation in the direction of the estimated distance until you obtain a
focused image. Now the parallax has been properly adjusted and you may
also read the distance on the turret.
Illustr. 4: Parallax adjustment
4.3 Illumination control
The illuminated reticle is designed to help identifying the correct aiming point
on a dark target and/or in poor light conditions.
First, set the intensity of the illuminated reticle to the respective light conditions.
To do this the illumination control may be turned from -0- toward position -11-
until a setting is achieved where the illuminated portion of the reticle is just
bright enough to be picked up by the eye without glaring. If possible, this
adjustment should be performed under quiet conditions prior to the actual
shooting. (see Illustr. 5)
If the illumination is not switched off by the shooter after use, illumination
control electronics automatically switch off the illumination after 2 hours.
If the illumination starts blinking, the battery is low and should be replaced.
12. Operating Manual
3-20x50 PMII Ultra Short
Page 12 of 25
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
Illustr. 5: Illumination control
4.4 Changing the battery
To replace the battery screw off the battery cap and remove the old battery.
Please discard the used battery in an ecologically compatible way!
Place the new battery (coin cell CR 2032/3V) with the „+" facing up into the
battery compartment. Do only change the battery in a dry environment.
Battery service life is at least 100 hours at the highest intensity (see Illustr. 6).
Illustr. 6: Battery replacement
13. Operating Manual
3-20x50 PMII Ultra Short
Page 13 of 25
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
4.5 Using the reticle for the distance estimation
The different available reticles offer a variety of possibilities to estimate or
measure important parameters by means of reticle subtensions. This allows the
shooter to place highly precise shots even on large distances by use of the
estimates, the ballistic compensator and the parallax adjustment.
The reticle is in the first focal plane such that the reticle subtensions remain
constant on all magnifications.
Exemplary for the P4F reticle in the first focal plane (see picture below) the
distance “B” of the large tics corresponds to 10cm/100m. The shooter can thus
calculate the distance to a target which size is known by measuring it with the
reticle pattern: If a 10cm sized target fits inbetween two large tics, it is
positioned in a distance of 100m.
For arbitrary object sizes and distances a relation exists according to the
following formula:
𝑑 =
𝑔
𝑎
∗ 100𝑚
Whereas
𝑑 is the distance to the target,
𝑔 is the estimated size of the target,
𝑎 is the size of the target on the reticle pattern.
According to the measured distance, the parallax can be set and the bullet
drop can be compensated by the elevation turret.
14. Operating Manual
3-20x50 PMII Ultra Short
Page 14 of 25
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
Notation of subtensions exemplary for the P4F.
The reticle subtensions for your reticle can be found in the catalog or on the
available datasheets.
15. Operating Manual
3-20x50 PMII Ultra Short
Page 15 of 25
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
5. Point of impact correction
5.1 Using the elevation turret and the windage turret
Elevation turret – Lockable Double Turn Turret with More Tactile Clicks
The elevation turret includes the following features:
Double turn
MTC (more tactile click)
Zero Stop
Locking function
The elevation turret provides a fine click adjustment value in addition to a
large elevation adjustment in two revolutions. When the turret is rotated into
the second revolution a small cylinder pops up on top of the turret which
indicates to the user that the second turret revolution has been reached. (See
Illustr. 7)
Illustr. 7: Functions of the double turn turret
The MTC (more tactile click) elevation turret has an audible "clunk" on every
10th click.
The elevation turret includes a locking function which prevents the
inadvertent adjustment of the turret. To lock the turret, the outer flange with
the engraving must be pushed down in direction of the scope tube until
16. Operating Manual
3-20x50 PMII Ultra Short
Page 16 of 25
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
“LOCKED” appears on the turret (Illustr. 8) To unlock the turret, the outer flange
must be pulled up until the “LOCKED” indicator completely disappears (Illustr.
8).
Illustr. 8: Locking function of the elevation turret: unlocked and locked
17. Operating Manual
3-20x50 PMII Ultra Short
Page 17 of 25
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
Windage turret – Single Turn Turret with Zero Stop and Protective Cap
The windage turret includes the following features:
• Single turn
• Zero Stop
• Protective cap
The low profile windage turret is protected against inadvertent adjustment by
a cap. To operate the turret, the cap is rotated counter-clockwise for removal.
(Illustr. 9) The windage turret has one positive "clunk" at the zero position which
provides a "0" reference point.
Illustr. 9: Removing the cap
5.2 Preliminary adjusting and fine adjusting when sighting in
When sighting in the scope for the first time, or re-sighting the scope due to
service or repair, a test shoot for zeroing the scope must be performed on a
100m distance. Therefore, ensure that the parallax is set to the correct value
of 100m and that both elevation and windage turrets are set to “0”. The
double turn turret must be set to the first revolution.
18. Operating Manual
3-20x50 PMII Ultra Short
Page 18 of 25
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
The centering of the target pattern is then performed according to
paragraph 5.3 and 5.4.
Lock the elevation turret, loosen the two setscrews on the outside diameter
in line with the “LOCKED” indicator using an Allen key (see Illustr. 7). Unlock
the turret by pulling up the outer flange and turn the turret until the
engraved “0” is indicated by the triangle on the saddle. Lock the elevation
turret by pushing down the outer flange with the engraving and tighten the
two setscrews with an Allen key.
To zero the windage turret, removed the turret cap and loosen the two
setscrews turn the turret to zero. Then retighten the screw and screw the
turret cap back onto the turret.
The turrets are secured by an additional third slotted screw which should
only be removed when completely replacing the turret due to damage.
The turret clicks can still be felt and heard when the screws are unlocked.
This has no impact on the process of zeroing as the thread piece does not
move while the setscrews are loose.
Illustr. 10: Zeroing of the scope – unscrewing the allen head screws
19. Operating Manual
3-20x50 PMII Ultra Short
Page 19 of 25
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
5.3 Elevation adjustment
Depending on the configuration, the point of impact is moved by either
0.1mrad (1cm on 100m) or ¼ MOA with every click. A too low point of impact
is corrected by rotating the elevation turret counter-clockwise (see Illustr. 11),
a too high point of impact by rotating the elevation turret clockwise.
For clockwise rotating turrets this relation is opposite!
Illustr. 11: Elevation adjustment
20. Operating Manual
3-20x50 PMII Ultra Short
Page 20 of 25
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
5.4 Windage adjustment
Depending on the configuration, the point of impact is moved by either
0.1mrad (1cm on 100m) or ¼ MOA with every click. A too far left point of
impact is corrected by rotating the windage turret counter-clockwise (see
Illustr. 12), a too far right point of impact is corrected by rotating the turret
clockwise.
For clockwise rotating turrets this relation is opposite!
Illustr. 12: Windage adjustment
21. Operating Manual
3-20x50 PMII Ultra Short
Page 21 of 25
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
6. Maintenance
6.1 Using the scope covers
To protect the scope and its lenses against adverse environmental conditions
like sand, dust, rain, snow, etc., the protective flip-up caps of objective and
eyepiece should be closed after every use of the scope. Before shooting,
make sure that the caps are open.
6.2 Care and maintenance
Schmidt & Bender PM II scopes do not require any special maintenance. All
metal parts have a hard anodized surface that is extremely scratch-resistant
and easy to care for.
For cleaning outer surfaces, use a clean and, if necessary, a slightly damp
cloth.
For cleaning the optics use the included Schmidt & Bender cleaning kit.
Before wiping the optic’s surfaces, use a dry brush to remove coarse dirt or
dust particles. Slight impurities may then be wiped off using an optic’s
cleaning cloth.
Breathe onto the optic’s surfaces before cleaning them, this helps with the
cleaning process. Excessive dirt may be removed using the cleaning liquid
included in the cleaning kit.
Avoid dry rubbing on the outside optical surfaces, this may harm the precious
coatings.
6.3 Storage temperature
The approved temperature range for the storage of the scope is from -55°C
to 70°C.
22. Operating Manual
3-20x50 PMII Ultra Short
Page 22 of 25
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
7. Warranty certificate
We hereby certify that our Quality Management System has been approved
by Unternehmensgruppe TUV Rheinland Berlin Brandenburg to the following
Quality Management Standard: The TUV Cert Certification Body of TUV
Anlagentechnik GmbH (Unternehmensgruppe TUV Rheinland Berlin
Brandenburg) certifies in accordance with TUV Cert procedures that Schmidt
& Bender GmbH & Co. KG, Am Grossacker 42, D- 35444 Biebertal has
established and applies a quality management system for the design,
production sales and service of fine mechanical optical instruments. Main
product telescopic sights. Proof has been furnished that the requirements
according to ISO 9001 – # Registration No. 01 100 67280 - are fulfilled. All parts
have been thoroughly inspected in accordance with the afore-mentioned
Quality Management System and correspond to the requirements of the
specifications, drawings, test procedures and standards in all respects.
Guarantee clause:
Official legal guarantee period of 2 years (according to the directive of EU)
Contact:
Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
• Germany
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
Schmidt & Bender Inc. • 741 Main Street • Claremont, NH 03743 • U.S.A.
Tollfree (800)468-3450 • Phone +1(603)287-4830 • Fax (603)287-4832
info@schmidtbender.com
23.
24.
25. Schmidt & Bender GmbH & Co. KG • Am Grossacker 42 • D-35444 Biebertal
Tel. +49 (0) 64 09-81 15-0 • Fax +49 (0) 64 09-81 15-11
info@schmidt-bender.de • www.schmidt-bender.de
Subject to changes, Date 11.07.2014, Revision 01, ID: 971-067-002