The document is an owner's manual for the Tango6T 1-6x24mm tactical riflescope by Sig Sauer. It includes sections on safety information, product identification of scope components, installation instructions for mounting the scope onto a rifle, operating instructions for focus, illumination settings and magnification adjustments, as well as instructions for bore sighting and adjusting point of impact. It also provides details on resetting turret adjustments to zero and specifications for several reticle options.

1. TANGO6T 1-6X24MM TACTICAL RIFLESCOPE
TANGO6T™
OWNERS MANUAL

2. 2
TABLE OF CONTENTS
Please visit sigsauer.com for Owners Manual downloads.
General Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setting Up A Safe Work Place. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Sight Adjustments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Reticle Subtensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

3. 3
sigsauer.com
General Safety Information
W WARNING
Safety is the number one concern when working with firearms.
• Keep the muzzle pointed in a safe direction at all times.
• Never allow live ammunition to be brought into the maintenance/cleaning area.
• Verify that the firearm is unloaded and clear prior to performing any maintenance.
• Do not touch the trigger unless the procedure requires you to do so.
• Always wear safety glasses with side shields when performing maintenance.
Setting Up A Safe Work Place
Having a proper work area to install this kit will help ensure success and reduce the chance of
damaging the firearm. A solid workbench with a bench mat, and a properly mounted vise with a mag
well block will help free up your hands for installation.

4. 4
PRODUCT IDENTIFICATION
A Objective Lens
B Main Tube
C Battery Cap
D Illumination Lock Ring
E Magnification Power Selector Ring
F Diopter Adjustment Ring
G Ocular Lens
H Mounting Reference Line
I Elevation Turret
J Windage Turret
K Magnification Throw Lever

5. 5
sigsauer.com
A B C D E F G
H I J K
Shown with optional ALPHA3 Mount

6. 6
DESCRIPTION QTY
TANGO6T 1-6x24MM Riflescope 1
Riflescope Throw Lever 1
CR2032 Battery 1
Lens Cleaning Kit 1
2MM Hex Key 1
SIG SAUER ELECTRO-OPTICS TANGO6T 1-6x24MM KIT CONTENTS

7. 7
sigsauer.com
REQUIRED TOOLS
DESCRIPTION QTY
T15 Torx Wrench 1
1/2” Wrench 1
2MM Hex Key 1
INSTALLATION
Mounting the TANGO6T riflescope to a SIG SAUER ALPHA Mount
Unscrew the mount screws with the provided T15 Torx tool and remove the mount ring top caps.
Place the riflescope inside of the mount and reinstall the top caps. Tighten the mount screws to finger
tight. You will adjust these fasteners again later.

8. 8
Place the riflescope on top of the desired weapons system. Set your
approximate eye relief by moving the mount forward or backwards in
different Picatinny slots. Optimal eye relief is 3.8” for the 1-6x24MM
scope. This is the distance from the ocular lens to the shooters eye.
Applying light pressure forward and to the left on your mount, tighten
the 1/2” hex bolts to 1/4 turn past hand-tight or 65 in-lbs.
Now you can slide the scope forwards and backwards inside of the
mount to set your fine or final eye relief.
A. Level your riflescope inside of your mount with the reference line
located on the front lefthand side of the maintube. This reference line
matches up with the top of the mount base.
B. The four screws which hold the mount top cap together should be
tightened in an ‘X’ pattern using the provided T15 Torx wrench. Take
care to make sure the gaps on either side are kept even, the screws
should be finger tight plus a 1/8 turn or 25 in-lbs.
1
2
3
4
A.
B.

9. 9
sigsauer.com
OPERATION
Installing the battery
TANGO6T riflescopes are equipped with illuminated reticles and require CR2032 batteries. To install the
battery loosen the battery cap on the left side of the riflescope turret. Place the battery into the battery
compartment with the plus side facing outward. Screw the battery cap down snug to ensure optimal
sealing of the battery compartment.

10. 10
Illumination brightness settings
• Pull illumination lock ring out to change brightness settings
• Select the illumination brightness level that suits your conditions the best
• Higher power settings are better suited for brighter conditions
• Lower power settings are better suited for low light conditions
• Brightness level settings alternate between on and off locations
• NV2 is the brightest Night Vision setting, with NV1 being the lowest Night Vision setting
• Push illumination lock ring back in to lock

11. 11
sigsauer.com
SIGHT ADJUSTMENTS
Focusing the reticle with the Diopter Adjustment Ring
Aim the riflescope at a light object or wall to maximize the contrast of the
reticle. Turn the diopter until the reticle comes into focus.
Adjusting Power
TANGO6T riflescopes are variable power. In order to increase the power
setting rotate the power selector ring clockwise. Turn the power selector
ring until the image is magnified to the desired range.

12. 12
Installing the throw lever
Loosen the set screw on the provided throw lever. Slide it over the eyepiece onto the middle of the
Power Select Ring. Tighten the 2MM Hex to 5 in-lbs.

13. 13
sigsauer.com
Bore sighting
With the rifle in a firm rest, remove the bolt from your rifles action (with AR style rifles remove the rifles
upper from its lower assembly and remove the bolt carrier). Look through the rifles barrel from the rear
of the rifle and aim it so that your target is centered inside of the barrel. Without moving the position of
the barrel, use the elevation and windage adjustments of your riflescopes reticle so that it is also in the
center of the target.

14. 14
Point of Impact (POI) corrections
POI corrections should be done using the center of a three shot group. If you are not able to get a
consistent three shot group then you will need to further troubleshoot your firearm.
If your POI is located to the left of your point of aim (POA), you will need to adjust the windage to the
right. To move the POI to the right turn the windage adjustment dial counter-clockwise. To move the POI
to the left turn the windage adjustment dial clockwise.
If your POI is located below your POA you will need to adjust the elevation adjustment dial up. To move
the POI up you will need to turn the elevation adjustment dial counter-clockwise. To move the POI down
you will need to turn the elevation adjustment dial clockwise.
Once your POI is located where you want it in relation to your POA you can remove your adjustment dials
and reset them to zero. Once you have reset your zero you can put the caps back on your adjustments.

15. 15
sigsauer.com
Resetting the Zero of your adjustment dials
Both the elevation and windage adjustment dials of TANGO6T riflescopes
are able to be zeroed. This is done by loosening the 2MM set screw on
the top of each dial. Remove the dial from the scope and rotate it until
the 0 marker lines up with the adjustment indicator line. Tighten the
2MM set screw on the top of the dial to 6 in-lbs. Take caution during this
zero reset procedure not to rotate the actual adjustment settings as this
will shift your desired POI.

16. 16
15°
15°
3
3
15°
3
A
0.85
1.02
1.27
0.17
0.17
2X 10
0.73
5.48
2X 2.3
2X
0.4
2X 4.7
2X 0.7
4X 0.97
DESCRIPT
THIS ENTIRE DOCUMENT AND ALL INFORMATION
THEREON IS CONFIDENTIAL AND PROPRIETARY AND THE
B
C
D
4 3 2
A
FL-6 Reticle subtension
dimensions
Dimensions are shown in mRAD
at maximum magnification.

17. 17
sigsauer.com
0.2 LONGEST FEATURE
3.2µm
15°
3
A
2.1
3.6
0.9
0.85
1.02
1.27
0.17
0.17
2X 0.8
2X 0.17
2X 10
0.73
4X 0.17
5.48
0.17
0.17
2X 2.3
2X
0.4
2X 4.7
2X 0.7
4X 0.97
DETAIL A
SCALE
7,7/(
72 Pease Boulevard Newington, NH 03801
6,=( $*(2'( 5(9
THIS ENTIRE DOCUMENT AND ALL INFORMATION
THEREON IS CONFIDENTIAL AND PROPRIETARY AND THE
EXCLUSIVE PROPERTY OF SIG SAUER, INC. AND SHALL
NOT BE REPRODUCED, DUPLICATED OR COPIED IN
WHOLE OR IN PART, DISCLOSED OR MADE AVAILABLE
TO ANY OTHER PERSON, FIRM, CORPORATION, OR
ENTITY OR OTHERWISE USED WITHOUT THE PRIOR
WRITTEN PERMISSION OF SIG SAUER, INC. ALL
DRAWINGS AND PRINTS, WHETHER IN PRINTED OR
ELECTRONIC FORMAT, MAY ONLY BE USED FOR THE
PURPOSE FOR WHICH PERMISSION TO USE WAS
GRANTED. THIS DOCUMENT MAY CONTAIN
TECHNOLOGY OR TECHNICAL DATA REGULATED BY THE
INTERNATIONAL TRAFFIC IN ARM REGULATIONS OR
EXPORT ADMINISTRATION REGULATIONS. TRANSFER OF
UNSPECIFIED FEATURES AND TOLERANCES
C
B
A
'5$:,1*180%(5
FL-6 Reticle subtension
dimensions
Dimensions are shown in mRAD
at maximum magnification.

18. 18
DWLR-6 RETICLE FEATURES
3
5
7
9
10 MPH
5 MPH
10 MPH
5 MPH
300m*
400m*
500m*
600m*
700m*
800m*
900m*
1,000m*
100 Meter Zero
*18 @ Given Distance
•Wind dots = 5 10mph holds @ Given Distance

19. 19
sigsauer.com
DWLR-6 RETICLE SUBTENSIONS
Subtensions in MRAD
1.25
0.15
2.25
0.75
0.3
0
0.27
0.7
1.21
1.79
2.41
3.08
3.8
4.57
5.4
6.29
7.24
8.26
9.36
10.54
11.81
13.19
14.66
16.24
0.25
0.29
0.33
0.38
0.46
0.57
0.3
0.23
0.15
0.13
0.8
1.11
0.72 1.45
0.92 1.83
1.12 2.24
1.35 2.7
1.6 3.2
1.84 3.68
3
6
9
0.45
15

20. 20
762 EXTENDED RANGE RETICLE FEATURES
6
4
8
10
100 Meter Zero
*18 @ Given Distance
•Wind dots = 10mph hold @ given distance
300m*
400m*
500m*
600m*
700m*
800m*
900m*
1000m*

21. 21
sigsauer.com
762 EXTENDED RANGE RETICLE SUBTENSIONS
6
4
8
10
ø0.3
ø0.3
3.87
3.31
2.76
3.27
1.83
1.45
1.1
0.8
0.6
0.48
0.4
0.34
0.3
0.27
0.24
0.43
1.23
1.7
2.22
2.78
3.39
4.05
4.77
5.54
6.39
7.31
8.32
9.42
10.63
11.95
13.38
Subtensions in MRAD

22. 22
300m*
350m
400m*
500m*
600m*
450m
550m
4mph
8mph
12mph
M855A1 HELLFIRE RETICLE FEATURES
100 Meter Zero
*18 @ Given Distance

23. 23
sigsauer.com
1.50
1.00
0.50
2.00
0.50
1.14
0.17
0.91
0.50
0.76
7.95
0.65
R0.250
1.52
1.00
1.00
0.17
4.20
6.30
10.00
8.00
1.20
2.20
3.30
4.60
1.70
2.70
3.90
10.00
2.10
0.50
M855A1 HELLFIRE RETICLE SUBTENSIONS
Subtensions in MRAD
on max magnification

24. 24
4
6
8
556/762 HORSESHOE DOT FEATURES
100 Yard Zero
18 @ Given Distance
300yd*
400yd*
500yd*
600yd*
700yd*
800yd*

25. 25
sigsauer.com
1.97
6.84
11.04
13.45
5.04
8.84
17.28
22.61
28.69
4
6
8
0.5
0.5
10
20
30
50
3
1.5
5
8
0.5
14.86
19.86
25.55
50
556/762 HORSESHOE DOT SUBTENSIONS
Subtensions in MOA

26. 26
0.10
0.10
0.50
0.175
0.50
0.75
0.10
1.00
5.00
10.00
0.50
0.175
3 GUN HELLFIRE RETICLE SUBTENSIONS
Subtensions in MRAD on max magnification

27. 27
sigsauer.com
0.6
1.5
0.75
0.6
1.5
0.75
30
2.4
0.6
30
2.4
3
0.4
0.4
3
15
15
Subtensions in MOA on max magnification
MOA MILLING HELLFIRE RETICLE SUBTENSIONS

28. 28
DWLR-556 RETICLE SUBTENSIONS
Subtensions in MRAD on max magnification
3
6
9
15
21.2
A

29. 29
sigsauer.com
DWLR-556 RETICLE SUBTENSIONS
Subtensions in MRAD on max magnification
0.15
2.25
1.25
0
3.36
2.72
2.16
1.68
1.26
0.89
0
1.08
1.51
1.99
2.52
3.11
5.27
6.15
7.13
8.23
4.47
3.76
1.72
1.39
1.1
DETAIL A
5 MPH
10 MPH

30. 30
TROUBLESHOOTING
POI changes between groups
• Check that all of your mounts are tightened to the correct torque specification
• Check/Clean your rifle
• Check for variations in ammunition
Illuminated reticle does not work
• Check that the battery is installed correctly
• Replace battery
• Ensure that the illumination power selector ring is in an on position

31. 31
sigsauer.com
MAINTENANCE
Your SIG SAUER riflescope requires very low maintenance.
• If your riflescope came with an illuminated reticle make sure that you turn the illumination control to
one of the off positions when it is not in use.
• If the battery for your illuminated reticle is dead, replace it by rotating the illumination battery cap
counter-clockwise. Replace the battery with a new CR2032 battery positive side facing out.
• Keep your lenses clear by using a soft cloth or lens pen. The best way to maintain image quality is by
keeping your lenses clear of dirt and dust that cause scratches.

32. 32
I
N
F
I
N
I T E G U A R A
N
T
E
E
S
I G
S A U E
R
SIG SAUER Electro-Optics Infinite Guarantee™
SIG SAUER has manufactured the most rugged, dependable high-performance firearms
for over two centuries. Our heritage of design, engineering and precision-manufactured
quality predates the existence of any other optics company worldwide. We understand
the importance of quality in the line of fire, at the shooting range or on your next hunt.
SIG SAUER Electro-Optics had to earn the right to wear that badge and the Infinite
Guarantee has your back, forever. Period.
We will repair or replace your SIG SAUER product in the event it becomes damaged or defective, at no
charge to you. If we cannot repair your product, we will replace it with a product in perfect working order
of equal or better physical condition. It doesn’t matter how it happened, whose fault it was, or where you
purchased it
If you ever have a problem, no matter the cause, we promise to take care of you when it counts.
Please note that our Infinite Guarantee does not provide coverage for intentional damage, misuse,
cosmetic damage that does not affect the performance of the optic, loss, theft or unauthorized repair or
modification. Excludes electronic components.
SIG SAUER Infinite Guarantee™
• Unlimited Lifetime Guarantee
• Fully Transferable
• No Warranty Card Required
• No Receipt Required
• No Time Limit Applies
• No Charge

33. 33
sigsauer.com
L
I
M
I
T
ED
5 Y E A R WA R R
A
N
T
Y
E
L
E
C
TRON I C TRI
T
I
U
M
SIG SAUER Electronic Tritium Component Limited 5-Year Warranty
For components not included under the SIG SAUER®
Infinite Guarantee™, this warranty
covers any defects in materials and workmanship in the electronic and Tritium
components of illuminated riflescopes/sights, pistol sights, electronic sights, flashlights,
lasers, binoculars, spotting scopes, and rangefinders. This warranty lasts for five years
from the date of manufacture. If, during that five-year period, these products are found
to have electronic or Tritium component defects in materials or workmanship, SIG SAUER will repair your
product, at no charge to you. If we cannot repair your product, we will replace it with a product in perfect
working order of equal or better physical condition.
SIG SAUER ELECTRO-OPTICS - MILITARY LIFETIME WARRANTY™
For Military use, SIG SAUER guarantees its Electro-Optics products to be free from manufacturer defects
in material and workmanship under normal use for the lifetime of the product. SIG SAUER, at its sole
discretion, will promptly repair or replace the product without charge to the customer, if the product is
covered under warranty. This Military Warranty is valid provided that the product has not been damaged
in the field by rough handling, misused, disassembled or tampered with in any way.
Any attempt to disassemble, alter or repair the product will void the warranty. SIG SAUER shall not, in
any event, be liable for any damages or other incidental or consequential damages arising out of the use
or inability to use such products. This warranty is limited to the original owner and is not transferable.

34. 34
NOTES:

35. 35
sigsauer.com
NOTES:

36. P/N 7401308 R06
FOR PRODUCT SERVICE ON THIS MODEL, PLEASE CALL 603-610-3000
27100 SW Parkway Avenue, Wilsonville, OR 97070 USA
sigsauer.com