1. Welcome to the Iron Man
Implement Trailer
(574) 343-2090
www.NewGenTrailer.com ... of trailers!
2” X 6” Treated Floor w/Board Tucks
3” X 4.1” C- Channel Cow Catcher
Rear Mounted Ramps with Spring Loaded Pins
2000 Lb. Top Wind
Jack
6” X 8.2” C- Channel Tongue & Full Wrap LED Lighting
STANDARD MODEL SPECIFICATIONS
Model Deck Length Deck Height Axles
NGIMPWDTA10K 83” 14” 2
NGIMPWDTA12K 83” 14” 2
NGIMPWDTA14K 83” 14” 2
NGIMPWDTA10K 83” 16” 2
NGIMPWDTA12K 83” 16” 2
NGIMPWDTA14K 83” 16” 2
NGIMPWDTA10K 83” 18” 2
NGIMPWDTA12K 83” 18” 2
NGIMPWDTA14K 83” 18” 2
When We Designed The If you want the best way to move your cars, ATV’s, small tractors,
New Gen Iron Man and other equipment and not have to worry about product
failure, then a New Gen Iron Man is what you are looking for.
Implement Trailer Series Our dealers and their customers provided input to create the
Ultimate Iron Implement Trailer Series. A New Gen Iron Man
Trailer comes standard with construction materials that others
We Immediately Discovered consider optional. We offer a wide range of options and you
can even custom order your New Gen Iron Man to meet your
SUCCESS! exact needs. Powder coat finish and a host of other features will
make your life easier!
Trailers & Manufacturing, LLC (574) 343-2090
612 Kollar Street-Elkhart, IN 46514 www.NewGenTrailer.com
Distributed by:

2. Iron Man Implement Trailer
www.NewGenTrailer.com
Standard Model Features
Standard D-Rings Tire Ramp
··All 6” X 8.2” C- Channel Tongue & Full Wrap ··Heavy Duty C- Channel Ramps w/ Ground Pad & Spring Asst.
··All C- Channel Main Frame (5" X 6.7" 10K) & (6" X 8.2" 12K & 14K) ··Heavy Duty Tread Plate Fenders wf Tread Plate Front & Rear Steps
··All C- Channel Cross Members (3” X 4.1”) 10K (24” On Center) ··Stake Pockets & Rub Rail
··All C- Channel Cross Members {3” X 4.1”) 12K & 14K (16” On Center) ··6- D Rings
··3” X 4.1” C- Channel Cow Catcher ··Drop Leg Set Back Jack, Size Dependent on Trailer Capacity
··2’ Tread Plate Beavertail ··2- Brake Axles w/ Easy Lube Hubs
··Rear Mounted Ramps with Spring Loaded Pins ··10K 6-Lug 225/75D/15” Tires on Silver Mod Rims
··Tear Drop Tread Plate Fenders with Front & Rear Steps ··12K & 14K S-Lug 235/SOR/16” Tires on Silver Mod Rims
··2000 Lb. Side Wind Jack with “Sand Foot” ··Wire Mesh Tool Box in Tongue
··Heavy Duty Powdercoat Finish ··2” X 6” Treated Floor w/Board Tucks
··D.O.T. Lighting- 100% L.E.D. ··7 Way Bargman Plug
··Break Away Battery Kit For Brakes ··Tandem Axle
··2-5/16” Ball & Adjustable Coupler
Powder Coat Finishes
Every New Gen Trailer we build is powder coated with PPG™ products. When you consider your first or next trailer,
a powder coat finish is far superior to conventional paint. Powder coat is extremely durable and does not crack,
chip, or peel more commonly associated with typical coatings. Powder coating is also much more rust and corrosion
resistant making it the longest lasting and most durable coating available.
Black Red White Yellow Grey Green Blue
Warranty
New Generation Trailers & Manufacturing, LLC warrants each trailer to be free from Defects in Materials and Workmanship for 24 months to the original purchaser from date of purchase, under normal use and rated load capacity.
New Generation Trailers & Manufacturing, LLC, warrants its’ finish to be free from defect as a result of improper surface preparation and application for a period of 24 months to the original purchaser from date of purchase, or 30 months from
date of manufacture, whichever expires first.
All auxiliary parts, axle assemblies, brake systems, wheels, tires, light systems, hitch couplers, jacks, power units, cylinders, or other accessories or purchased parts are covered by the warranty of the original manufacturer.
This warranty does not cover: normal wear, lack of maintenance, abuse or negligence, overloading in excess of the GVWR on the VIN sticker. Additional terms apply and can be found at www.NewGenTrailer.com
(574) 343-2090 www.NewGenTrailer.com All materials © 2012-2013 New Generation Trailers, LLC