The document describes several portable power products from IDX including: 1) The VL-PVC1 charger that charges ENDURA Li-ion batteries and has a compact size for on-location use. 2) The A-E2KPM chassis that mounts an AJA Ki Pro Mini recorder to camera batteries for simultaneous power to both. 3) The A-E2BT24V adaptor that provides DC power from ENDURA batteries to Panasonic BT-3DL2550 and BT-LH2550 monitors.

1. 2

5. • Input voltage: AC 100~240V 50/60Hz
• Output voltage/current: DC 12V/3A
• Dimensions (V-Plate charger):
3.3(W) x 1.1(H) x 5.6(D) inches
Now you can ‘charge on the go’ with the VL-PVC1: the latest • Weight: 0.79 lbs approx.
addition to our ENDURA charger product line-up. When it has to • Charge plate input voltage: DC 12V +/- 5%
be portable and compact for crew work or when keeping travel • Compatible batteries:
gear light, the VL-PVC1 delivers the small profile of our V-Plate All IDX ENDURA System Li-ion batteries
combined with robust charging that works on all our ENDURA
series 12V Lithium Ion batteries.
connector

6. 12V to 5V/7.3V
This will
provide a D-Tap for broadcast camera that do not have a D-Tap output.

7. belt loop to wear
on operator’s waist belt.
• Dimensions: 4.45(W) x 5.28(D) x 7.09(H) inches
• Weight: 1.55 lbs approx.
J • D-Tap Output:
12VDC (unregulated) battery voltage output (50W max.)
The A-E2KPM is a rugged V-Mount chassis and mounting adaptor for
the AJA Ki Pro Mini flash disk recorder. Attaching directly to the camera
V-Mount, the A-E2KPM allows IDX ENDURA 12V Lithium Ion V-Mount
batteries to provide power for both the Ki Pro Mini and the camera. In female
a stand-alone configuration, IDX ENDURA batteries supply ample
power for the AJA disk recorder.
• Dimensions:
4.64 (w) x 6.29 (H) x 1.93 (D) inches (cable not included)
• Weight: 1.22 lbs approx.
can be
mounted This battery adaptor is specially designed for providing DC power for
Panasonic monitors BT-3DL2550 and BT-LH2550 using ENDURA
batteries. The A-E2BT24V installs easily onto either monitor’s VESA100
mount area using supplied screw set or attaching the hardwired XLR
connector directly to the monitor. This mount can be installed either
vertically or horizontally. IDX strongly recommends using models
ELITE, E-HL9 or E-HL9S for this application.

8. with
4 channel selectable frequencies and Auto
1080p/23.98,