This document provides specifications and repair instructions for steering systems on various models of J, E, N, V, and E lift trucks. It includes:
- Dimensions and specifications for steering housings, control units, cylinders and other components.
- An overview of hydraulic steering system operation where the steering control unit controls oil flow to the steering cylinder.
- Instructions for removing various parts of the steering column assembly like the steering wheel, switches, sensors and hoses to access the steering control unit.
- Warnings about properly identifying and reconnecting hydraulic hoses to ensure correct steering system operation.
2007 Subaru Legacy 4 Service Repair Manualfujsjejkkekmm
This is the Highly Detailed factory service repair manual for the2007 SUBARU LEGACY 4, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2007 SUBARU LEGACY 4 Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Engine
Body
Body Repair
Chassis
Transmission
Wiring
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2007 SUBARU LEGACY 4 Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Yamaha G1 Golf Car Service Repair Manualjksmeremmd
This is the Highly Detailed factory service repair manual for theYAMAHA G1 GOLF CAR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.YAMAHA G1 GOLF CAR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveYAMAHA G1 GOLF CAR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Suzuki DT15C (1988) outboard motors Service Repair Manualfudjfjjskwekmem
This is the Highly Detailed factory service repair manual for theSUZUKI DT15C (1988) OUTBOARD MOTORS, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.SUZUKI DT15C (1988) OUTBOARD MOTORS Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Lubrication
Fuel System
Ignition System
Cooling System
Power Head
Manual Starter
Lower Unit
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveSUZUKI DT15C (1988) OUTBOARD MOTORS Service Repair Workshop Manual.
Thanks for visiting!
Assembly and Disassembly Procedure of Screw type Compressor Shah Jalal
The Procedure will be very much helpful for complete overhauling of Screw type Compressor .The Maintenance Procedure is for Fuel Gas Compressor(KOBELCO) of 450 MW Meghnaghat Power Plant.
2007 Subaru Legacy 4 Service Repair Manualfujsjejkkekmm
This is the Highly Detailed factory service repair manual for the2007 SUBARU LEGACY 4, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2007 SUBARU LEGACY 4 Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Engine
Body
Body Repair
Chassis
Transmission
Wiring
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2007 SUBARU LEGACY 4 Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Yamaha G1 Golf Car Service Repair Manualjksmeremmd
This is the Highly Detailed factory service repair manual for theYAMAHA G1 GOLF CAR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.YAMAHA G1 GOLF CAR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveYAMAHA G1 GOLF CAR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Suzuki DT15C (1988) outboard motors Service Repair Manualfudjfjjskwekmem
This is the Highly Detailed factory service repair manual for theSUZUKI DT15C (1988) OUTBOARD MOTORS, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.SUZUKI DT15C (1988) OUTBOARD MOTORS Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Lubrication
Fuel System
Ignition System
Cooling System
Power Head
Manual Starter
Lower Unit
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveSUZUKI DT15C (1988) OUTBOARD MOTORS Service Repair Workshop Manual.
Thanks for visiting!
Assembly and Disassembly Procedure of Screw type Compressor Shah Jalal
The Procedure will be very much helpful for complete overhauling of Screw type Compressor .The Maintenance Procedure is for Fuel Gas Compressor(KOBELCO) of 450 MW Meghnaghat Power Plant.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
2. 8000 SRM 1227 Hydraulic System
Counterweight
Model * mm (* in.)
Weight +50 kg
(110 lb)
0 kg
(0 lb)
J2.00-2.50XM (J40-50Z) 717 mm (28.2 in.) 685 kg (1510 lb)
J2.50-3.00XM (J50-60Z) 861 mm (34.0 in.) 685 kg (1510 lb)
J3.20XM (J65Z) 861 mm (34.0 in.) 750 kg (1650 lb)
*Approximate battery compartment lengths (identifies frame size).
Hydraulic System
Table 1. Manual Control Valve
Item Specification
Relief Pressure, Lift System 20.7 ±0.7 MPa (3000 ±100 psi)
Relief Pressure, Tilt System
With Auxiliary Relief Valve 15.5 ±0.7 MPa (2250 ±100 psi)
Without Auxiliary Relief Valve 21.4 ±0.7 MPa (3100 ±100 psi)
Relief Pressure, Auxiliary 15.5 ±0.7 MPa (2250 ±100 psi)
Relief Pressure, Steering System 8908 ±345 kPa (1292 ±50 psi)
Oil temperature 54 to 66 C (130 to 150 F).
Table 2. E-Hydraulic Control Valve
Item Specification
Relief Pressure, Lift System (Primary Relief Valve) 22.7 ±0.7 MPa (3300 ±100 psi)
Relief Pressure, Tilt System and Auxiliary Functions
(Secondary Relief Valve)
15.5 ±0.7 MPa (2250 ±100 psi)
Relief Pressure, Steering System 8908 ±345 kPa (1292 ±50 psi)
Oil temperature 54 to 66 C (130 to 150 F).
1
3. Steering System 8000 SRM 1227
Steering System
Item Specifications
Oil Temperatures 49 to 60 C (120 to 140 F)
Inside Steering Tire Angle 82
Number of Turns to Lock 4.9
Steering Relief Pressure 8908 ±345 kPa (1292 ±50 psi)
Steering Relief Current (Approximate) 37 amps
Open Center Pressure 50 psi
Open Center Current 5 amps
Steering Time (Unloaded Static) 2.5 seconds
Steering Control Unit Displacement 80
Minimum Turning Radius (Truck With Load) ±2 in. (±50 mm) Acceptable
717 mm Battery Compartment
J2.00XM (J40Z)
J2.50XM (J50Z)
1996 mm (78.58 in.)
861 mm Battery Compartment
J2.50XM (J50Z)
J3.00XM (J60Z)
J3.20XM (J65Z)
2148 mm (84.57 in.)
2
4. 8000 SRM 1227 Battery Specifications
Wheels and Tires
Item Specification
Torque - Drive Wheel Nuts 155 to 175 N•m (114 to 166 lbf ft)
Torque - Steering Wheel Nuts 237 to 305 N•m (175 to 225 lbf ft)
Drive Tires, Size Pneumatic 23 × 10-12 16 Ply
Drive Tires, Size Pneumatic-Shaped Solid 23 × 10-12/8.0
Drive Tires, Size Snap-On Solid Tires 23 × 10-12/8.0
Steering Tires, Size Snap-On Solid Tires 18 × 7 × 8
Steering Tires, Size Pneumatic 18 × 7.00 × 8.00 16 Ply
Steering Tires, Size Pneumatic-Shaped Solid 18 × 7.00-8/4.33
Battery Specifications
Battery Size Minimum/
Maximum
Weight
Model
Min. Com-
partment Size
Width × Length
Length Width Minimum Maximum
J2.00-2.50XM
(J40-50Z)
712 × 1032 mm
(28.0 × 40.6 in.)
1025/1028 mm
(40.4/40.5 in.)
708/711 mm
(27.9 to 28.0 in.)
1470 kg
(3241 lb)
1625 kg
(3582 lb)
J2.50-3.20XM
(J50-60Z)
856 × 1032 mm
(33.7 × 40.6 in.)
1025/1028 mm
(40.4/40.5 in.)
852/855 mm
(33.5 to 33.7 in.)
1780 kg
(3924 lb)
1965 kg
(4332 lb)
The tolerances of the battery compartment are +3 and 0 mm (+0.12 and 0 in.). The battery size column
shows the size range that will permit the battery to still fit into a battery compartment.
The battery compartment length is front to back. Width is side to side. The length dimension of the battery
must fit within the battery compartment side-to-side dimension with a clearance of 0 to 13 mm (0 to 0.5 in.)
maximum. Battery width must fit within the battery compartment front-to-back dimension.
WARNING
The battery must fit the battery compartment so that the battery restraint system will operate
correctly. Use only batteries with the correct length shown in this table. Adjust the spacer plate
and side spacers to prevent the battery from moving more than 13 mm (0.5 in.) either direction.
3
6. 1600 SRM 720 Description
General
This section has the description and repair procedures for the steering housing and the steering control unit.
Additional information on parts of the steering system can be found in the Steering Axle and Hydraulic
System service manual sections for your lift truck.
Description
The steering column assembly uses a steering con-
trol unit with hose connections on the bottom of the
unit. The steering housing has mounts for the steer-
ing column and the steering control unit. The steer-
ing wheel is installed on the steering column. See
Figure 1. The housing is adjustable and is held in po-
sition by a latch. The position of the housing can be
changed for operator comfort. The steering housing
is also the mount for control levers and some instru-
ment clusters.
The steering system is a hydraulic system that does
not have a mechanical connection between the steer-
ing wheel and the steering axle. The control of the
steering is through a hydraulic circuit.
If the hydraulic pump for the steering system does
not operate, steering is still possible. A check valve
permits the steering control unit to control the steer-
ing cylinder. The lift truck is difficult to steer when
the steering pump is not operating, but the steer-
ing control unit can operate the steering cylinder and
make steering possible.
NOTE: INSTRUMENT CLUSTER NOT SHOWN.
H2.00-3.20XM (H40-65XM) SHOWN.
1. STEERING WHEEL
2. STEERING
COLUMN
3. STEERING
CONTROL UNIT
4. COLUMN TILT
LEVER
5. LATCH
6. COVER
7. COWL
8. MOUNT
Figure 1. Steering Housing Assembly
1
7. Operation 1600 SRM 720
Operation
The steering control unit is a rotary valve operated by
the steering wheel. See Figure 2. During the steer-
ing operation, the steering control unit controls the
direction and amount of oil flow to the steering cylin-
der. The steering cylinder in the axle actuates the
steering linkage to move the steer tires. Hydraulic
oil returns from the steering cylinder to the steering
control unit and then to the hydraulic tank.
Turning the steering wheel actuates three main
parts of the steering control unit: the spool for the
control section, the sleeve for the control section, and
the rotor in the metering section. When the steering
wheel is not moving, the spool and sleeve are held
in the NEUTRAL (center) position by springs. Dur-
ing this time, oil flows freely through the steering
control unit but none flows to the steering cylinder.
As the steering wheel is turned, the spool just be-
gins to rotate. The springs try to move the sleeve to
keep the NEUTRAL position between the spool and
sleeve. However, the necessary force to turn the ro-
tor is greater than the pressure of the springs. The
springs begin to bend, letting the spool move a small
amount within the sleeve. The spool stops moving
when it touches the center pin. In this position, the
holes in the sleeve and the spool are aligned. Oil com-
ing into the control unit flows to the metering section.
More rotation of the steering wheel causes the spool
to rotate the pin. This action causes the rotation of
the sleeve and the rotor in the metering section. The
oil then flows to one side of the steering cylinder. Oil
from the other side of the cylinder returns through
the control section of the steering control unit.
When the steering wheel stops moving, the meter-
ing action in the metering section also stops. The
NEUTRAL position springs return the sleeve to the
NEUTRAL position, stopping oil flow to or from the
cylinder. The pressure stays in the steering cylinder
to keep the steer tires in position. Oil from the pump
flows through the steering control unit to the tank or
other parts of the system. To return the steer wheels
to the straight position, the steering wheel must be
rotated in the opposite direction. The steering con-
trol unit will operate as described, but all parts will
rotate in the opposite direction.
2
8. 1600 SRM 720 Operation
1. SPRING SET
2. SPOOL
3. SLEEVE
4. CENTER PIN
5. GEAR SET
6. CONTROL SECTION
7. METERING SECTION
Figure 2. Steering Control Unit
3
9. Steering Wheel and Column Assembly Repair 1600 SRM 720
Steering Wheel and Column Assembly Repair
The upper end of the steering shaft has splines for the
steering wheel. A large hex nut holds the steering
wheel onto the steering column. The horn button is
the cover for the center of the steering wheel. The
lower end of the steering column has splines or a tang
to engage the steering control unit. See Figure 5 and
Figure 6.
The steering column assembly is adjustable and held
in position by a latch. The position of the steering col-
umn assembly can be changed as needed for different
operator requirements. An access cover on the steer-
ing column gives access to the steering control unit,
key switch, horn switch, and if installed, the direc-
tion switch.
ASSEMBLY COMPONENTS, REMOVE
NOTE: This procedure is for the removal of all com-
ponents of the steering column assembly. All compo-
nents are not often removed for a repair procedure.
Do only those steps of the procedure necessary to re-
move the required component. See Figure 5 and Fig-
ure 6.
WARNING
The hydraulic hoses must be connected to the
correct ports or the steering system will not op-
erate as expected, which can cause damage or
personal injury. Make sure the hoses are iden-
tified and connected correctly.
CAUTION
Disconnect the negative battery cable on inter-
nal combustion trucks. Disconnect the battery
connector on electric trucks. Disconnect the
battery before removing any covers.
1. Attach a tag on the battery connector or negative
cable stating DO NOT CONNECT BATTERY.
Move the steering column to the most FOR-
WARD position. Remove the column tilt lever.
Remove the upper and lower access covers from
the steering column.
2. Remove the key switch and static strap from the
housing of the steering column. Make an identi-
fication of the electric wires and disconnect them
from the key switch.
3. On units with the Direction Control Handle,
Remove the direction switch assembly from the
housing of the steering column. Make an identi-
fication of the electric wires and disconnect them
from the direction switch. See Figure 3.
NOTE: DIRECTION CONTROL HANDLE ASSEMBLY
FOR MODELS J2.00-3.20XM [J40-65Z] (A416/B416),
E1.50-2.00XM [E25-35Z, E40ZS] (E114/F114),
N30XMH, AND N30XMH2 (C210), V30ZMD (D210/
E210), E3.50-5.50XL, E4.50XLS (E70-120Z, E100ZS)
(D098/E098), AND E2.00-3.20XM [E45-65Z] (G108)
IS SHOWN. OTHER TRUCK DIRECTION CONTROL
HANDLE ASSEMBLIES ARE SIMILAR.
1. DIRECTION SWITCHES
2. SHIFT LEVER ASSEMBLY
3. SCREW
4. ELECTRICAL CONNECTORS
Figure 3. Direction Control Handle Assembly
4. Remove the plastic rivets that fasten the bracket
for the horn switch to the housing of the steering
column. Move the horn switch and bracket away
from the steering column. See Figure 5 and Fig-
ure 6.
4
10. 1600 SRM 720 Steering Wheel and Column Assembly Repair
CAUTION
If a puller tool is used to remove steering wheel
from steering column, be careful not to damage
the horn wires.
5. Remove the horn button assembly and electrical
wires. Remove the large hex nut and the steer-
ing wheel from the shaft. A puller tool makes
removal of the steering wheel easier, but not all
steering wheels have puller holes.
6. On lift truck models J2.00-3.20XM (J40-
60XM2) (A216), E1.50-1.75XM, E2.00XMS
(E25-40XM2S) (D114), N30XMH, N30XMH2
(C210), and E2.00-3.20XM (E45-65XM2) (F108)
units, remove the optical encoder housing and
optical encoder from the steering column. Make
an identification of the electrical wires and dis-
connect them from the assemblies. See Figure 5.
7. On lift truck models J2.00-3.20XM [J40-
65Z] (A416/B416), E1.50-2.00XM [E25-35Z,
E40ZS] (E114/F114), V30ZMD (D210/E210),
E3.50-5.50XL, E4.50XLS (E70-120Z, E100ZS)
(D098/E098), and E2.00-3.20XM [E45-65Z]
(G108), disconnect the connector. Remove the
two capscrews and steering sensor from the
steering column. See Figure 6.
8. Make an identification of the hydraulic hoses
at the steering control unit so they can be con-
nected correctly during assembly. See Figure 4,
Figure 5, Figure 6, and the WARNING in the
beginning of this section. Some hydraulic hoses
have fittings that will permit disconnection at
the steering control unit. Disconnect the other
hydraulic hoses at the base of the cowl, the
control valve, or the steering pump. Remove
all mount clamps so that the hoses will turn
freely and not become twisted. Disconnect the
hydraulic hoses at the bottom of the steering
control unit. Install plugs at all hoses and ports
to prevent dirt from entering the steering hy-
draulic system.
1. HYDRAULIC HOSE ENDS
2. HOSE PORTS
3. STEERING CONTROL UNIT
4. SCREWS
5. HORN SWITCH
Figure 4. Hydraulic Hose Connections
9. If your model of lift truck has an instrument
cluster that wraps around the steering col-
umn, remove the instrument cluster. The
removal procedures for the instrument clus-
ter can be found in the service manual sec-
tions Instrument Cluster 2200 SRM 514 for
models H2.00-3.20XM (H40-65XM) (H177),
S1.50-1.75XM, S2.00XMS (S25-40XM) (D010)
and H1.50-1.75XM, H2.00XMS (H25-35XM,
H40XMS) (E001), or Electrical System,
Replacement, Checks, and Adjustments
Trucks with EV-100/200ZX or SR (SEM)
and SP Motor Controllers 2200 SRM
560 for models E1.50-1.75XM (E25-35XM2)
(D114), E2.00XMS (E40XM2S), E2.00-3.20XM
(E45-65XM2) (F108), and J2.00-3.20XM
(J40-60XM2) (A216).
10. If there is a instrument cluster on the steering
column housing, disconnect all plugs connected
to the display panel.
5
12. Thank you very much
for your reading. Please
Click Here Then Get
More Information.
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
13. 1600 SRM 720 Steering Wheel and Column Assembly Repair
Legend for Figure 5
NOTE: * NOT INCLUDED ON LIFT TRUCK MODELS H2.00-3.20XM (H40-65XM) (H177), S1.50-1.75XM,
S2.00XMS (S25-40XM) (D010), AND H1.50-1.75XM, H2.00XMS (H25-35XM, H40XMS (E001)
1. ON-DEMAND STEERING COMPONENTS
2. UPPER ACCESS COVER
3. BRACKET
4. PIVOT (STEERING) SHAFT
5. PLATE
6. LOCKWASHER
7. CAPSCREW
8. LOCK NUT
9. SCREW
10. STATIC GROUND PATCH
11. LOWER ACCESS COVER
12. COLUMN TILT LEVER
13. PUSH ROD
14. LATCH
15. SPRING
16. WASHER
17. COTTER PIN
18. PIN
19. STEERING CONTROL UNIT
20. PLUG (WITHOUT TURN SIGNAL)
21. OPTICAL ENCODER HOUSING*
22. GEAR*
23. OPTICAL ENCODER*
24. HORN BUTTON ASSEMBLY
25. STEERING WHEEL
26. STEERING COLUMN
27. RETURN SPRING
28. LARGE HEX NUT
29. INPUT
30. RIGHT TURN
31. LEFT TURN
32. RETURN
33. PLASTIC RIVET
11. Remove the tilt stop screw located at the bottom
left side of the steering column bracket.
12. Remove the capscrews, lockwashers, and lock
plates that fasten the steering column to the
pivots on the lift truck. Remove the steering col-
umn from the lift truck. Make sure the electric
wires and the hydraulic hoses are not damaged
as the steering column is removed.
13. Remove the four capscrews that hold the steer-
ing column to the bracket. Remove the four cap-
screws or nuts that fasten the steering control
unit to the steering column.
STEERING CONTROL UNIT,
DISASSEMBLE
1. Place the steering pump into a soft jaw vise with
the splined shaft facing down.
2. Remove the hydraulic fittings and the special
screws, and rotate the steering pump 90 degrees
sideways in the vise. Discard the O-rings. See
Figure 7.
3. Remove the end cover, spacer, gear housing,
and gear from the steering pump. Discard the
O-rings.
4. Remove the cardan shaft from the spool assem-
bly.
5. Remove the check ball, ball stop, and emergency
steering ball from the pump housing.
6. Remove the spool assembly from the pump hous-
ing.
NOTE: To help with installation of the thrust bearing
assembly, note the positions of the thrust washers
on either side of the thrust bearing while performing
Step 7.
7. Remove the thrust bearing assembly from the
shaft end of the spool assembly.
8. Remove the retaining ring from the spool assem-
bly.
9. Press the cross pin out of the spool assembly.
10. Press the spool from the sleeve and remove the
springs from the spool. Press the spool from the
sleeve and remove the springs from the spool.
11. Remove the shaft seals from the pump housing.
Discard the seals.
7
15. 1600 SRM 720 Steering Wheel and Column Assembly Repair
Legend for Figure 6
1. ON-DEMAND STEERING COMPONENTS
2. UPPER ACCESS COVER
3. BRACKET
4. PIVOT (STEERING) SHAFT
5. PLATE
6. LOCKWASHER
7. CAPSCREW
8. LOCK NUT
9. SCREW
10. STATIC GROUND PATCH
11. LOWER ACCESS COVER
12. COLUMN TILT LEVER
13. PUSH ROD
14. LATCH
15. SPRING
16. WASHER
17. COTTER PIN
18. PIN
19. STEERING CONTROL UNIT
20. PLUG (WITHOUT TURN SIGNAL
21. HORN BUTTON ASSEMBLY
22. STEERING WHEEL
23. STEERING COLUMN
24. RETURN SPRING
25. STEERING SENSOR
26. LARGE HEX NUT
27. INPUT
28. RIGHT TURN
29. LEFT TURN
30. RETURN
31. PLASTIC RIVET
STEERING CONTROL UNIT, CLEAN
WARNING
Cleaning solvents can be flammable and toxic
and can cause skin irritation. When using
cleaning solvents, always follow the solvent
manufacturer’s recommended safety precau-
tions.
WARNING
Compressed air can move particles so that they
cause injury to the user or to other personnel.
Make sure that the path of the compressed air
is away from all personnel. Wear protective
goggles or a face shield to prevent injury to the
eyes.
Clean all the parts in solvent. Dry the parts with
compressed air. Do not dry the parts with a cloth.
Make sure all surfaces are free of scratches and sharp
edges.
STEERING CONTROL UNIT, ASSEMBLE
1. Using a seal installer, install the shaft seals in
the pump housing.
2. Install the spool into the sleeve with the key slots
opposite each other.
3. Insert the curved springs between the flat
springs. See Figure 7. Install the spring set into
the spool assembly.
NOTE: The retaining ring must be able to rotate
unimpeded by the springs.
4. Center the springs in the spool assembly, and in-
stall the retaining ring over the sleeve.
5. Install the cross pin into the spool assembly.
6. Install the thrust bearing assembly, as noted dur-
ing removal, on the spool assembly.
7. Place the pump housing in a soft-jawed vise in
the horizontal position. Install the spool assem-
bly into the housing while holding the cross pin
in a horizontal position.
8. Rotate the pump housing to the vertical position,
and rotate the spool so that the pin in the spool
is pointing to the "P" port position. See Figure 5
and Figure 6.
9. Install the emergency steering ball, ball stop,
and check ball in the "P" port. See Figure 5 and
Figure 6.
10. Install a new O-ring on the housing and place the
distributor plate on the housing, with the holes
properly aligned with the pump housing.
11. Install the cardan shaft and rotate it until it is
engaged with the pin in the spool assembly, and
until the teeth of the gear end are aligned as
shown in Figure 7.
12. Install the gear wheel onto the cardan shaft as
shown in Figure 7.
9