This document describes the features of a safety boot, including: - An upper made of thick, water and oil resistant full grain leather. - A removable, anti-bacterial treated inlay and lining to absorb perspiration. - A dual density Softane sole with shock absorption to protect the back and joints from vibrations.

1. www.hse.co.za “THE RIGHT PRODUCT, THE RIGHT PRICE AND RIGHT ON TIME” 33
Natural-coloured boot with 2 leather side tabs for rapid pull-on
Upper in water and oil resistant full grain AP 23 leather, exclusive to:
10 to 15% thicker (2,4 mm) than most leathers used for safety footwear
Resistance to penetration of water vapour three times higher than the minimum fixed by european standard
Flat binding at top of quarters
Heel stiffener to reinforce the heel seat
Full-size inlay, removable, anti-bacterial treated, anatomical and comprising heel shock absorber. High capacity to absorb and desorb perspiration.
Forefoot lining, resistant to abrasion and perspiration acids
Dual density Softane™ sole with progressive shock absorber to protect back and joints from vibrations. Self cleaning sole pattern. Multi-directional
treads. Rounded heel pressure zone for comfort and stability Heel schock absorption 29 Joule
Safety Footwear
Ranger type boot, natural colour
Upper in finest quality AP 23 leather, water and oil-resistant, exclusive toJallatte
10 to 15% thicker (2,4 mm) than most leathers commonly used in safety shoes
Resistance to penetration by water vapour better than the minimum set by european standard.
Padded collar, lined in leather, for better protection of the Achilles tendon and greater comfort when walking
Fastens by 7 pairs of eyelets on a leather gusset for good waterproofing
Counter to prevent the heel from slipping
Aerane-Tech 200 J toe-cap. Perforated toe cap for perfect foot ventilation. 100 % composite. Nonmagnetic, lightweight
FleXtane™ By Jallatte, 100% composite, flexible and non-magnetic. It covers 100 % of the foot surface. 70 % lighter than steel midsoles.
Penetration resistance ≥ 1100 N
Dual density Softane™ sole with progressive shock absorber to protect the back and joints against vibrations
Comfort layer density = 0.45 / Outsole density = 1,10
Heel shock absorption 30 Joule
Highly resistant to oils and hydrocarbons
Abrasion resistance 75 mm3
JALOSBERN SAS
J0662
Sizes 38 to 48
EN ISO 20345: 2004 S3 SRC
Finest Quality Leather AP 23
Softane™ Sole
SOFTANE™ TRADITION
Jalaska Sas
J0266
S3 CI SRC
EN ISO 20345:2011
36 To 48
Full Grain Ap 23 Leather
Softane™ Dual-Density Sole