One of the biggest misconceptions about choosing the right snowboard size is that it should be based on your height. While this may seem to be intuitive, in fact, it fails to take into account another important factor, which is your weight. If you do not choose the right snowboard taking your weight as a factor, you will end up not being able to control the snowboard or will have difficulty moving it.

1. How to Calculate the Correct Snowboard Size
One of the most significant misconceptions about picking the right snowboard size is that it ought to be
based upon your height. While this could appear to be instinctive, in fact, it fails to take into
consideration another crucial aspect, which is your weight. If you do not pick the right snowboard taking
your weight as an element, you will end up not having the ability to manage the snowboard or will have
trouble moving it.
To know more about it, visit http://www.snowboardsizing.org
Hence, the first phase in calculating the right snowboard size is to use a recommended cyclist
weight/length chart provided by many suppliers, which provides the advised board length based upon
weight. For example, if you weigh in between 95 to 145 pounds, the recommended snowboard length is
151 cm. On the other end of the spectrum, if you weigh 155 pounds to 205 pounds, you should get a
snowboard measuring 166 centimeters.
To know more about it, visit http://www.snowboardsizing.org
The reasoning behind this is that lighter riders require much shorter boards because these are much
easier to manage. On the other hand, if you are heavier, your board should be longer and less pliable
since it will execute better for you. The rider of ordinary height should have an intermediate-sized board
that comes up to your chin to brows when the end of the board is put against the ground. These boards
provide enough control for cyclists in all kinds of terrain, from steeps to parks.
To know more about it, visit http://www.snowboardsizing.org
Flex Patterns
Another factor to consider when choosing a board is how flexible it is. There are 2 kinds of snowboard
versatility:.
Torsional Flex. This describes the board's versatility throughout its width, which defines how well it will
manage on its edge. Too much torsional flex would make it more challenging to initiate a turn while
insufficient would make it tough to keep the snowboard on its edge when finishing a turn.
Longitudinal Flex. This describes the flexibility of the board from end to end. A more balanced flex will
let a snowboard make a turn equally while an unbalanced flex enables the rider to move from one edge
to the other faster because it speeds up more quickly.
To know more about it, visit http://www.snowboardsizing.org

2. If you are just starting in snowboarding, a shorter and even more versatile board is suggested given that
it will turn faster at slower speeds than a longer board. On the other hand, if you have more experience,
you might wish a stiffer board that you could keep under control more easily at greater speeds. In
addition, those with smaller sized frames must get softer boards while heavier cyclists will require stiffer
boards.
To know more about it, visit http://www.snowboardsizing.org
Snowboard Widths
It is also very crucial to select the right width of the snowboard. The correct width is identified by your
boot size, since when you stand on the snowboard, your toes and heels ought to extend just slightly
over the edge, which permits you to apply take advantage of to the board. However if your boots extend
too far over the side of the board, you'll fall when they hit the snow while you're making a difficult turn.
General rules for boot size vs. snowboard width:.
� Narrow-- below size 7;.
� Regular-- size eight to simply below 10;.
� Mid-wide-- size 10 to 11.5;.
� Wide-- above 11.5.
To know more about it, visit http://www.snowboardsizing.org
Snowboard Shapes.
Finally, you must think about the form of the snowboard based on your riding style and the surface you
plan to ride in.
Directional Shape. These boards are meant to be ridden primarily in one instructions; hence, they are
stiffer in the tail end and softer in the nose. They are made use of generally by freeriders and all
mountain bikers.
To know more about it, visit http://www.snowboardsizing.org.

3. Real twin. These boards have symmetrical measurements, with tail and suggestion sizes exactly the
same as well as having exact same flex patterns. These are made use of by freestyle cyclists and those
who ride in surface parks.
To know more about it, visit http://www.snowboardsizing.org.
Directional Twin Shape. Combining features of the first 2 kinds of boards, this snowboard has suggestion
and tail measurements that are similar however with different flex patterns, with the tail less pliable
than the pointer. This board is most effectively for riders in all-mountain and freestyle surfaces.
To know more about it, visit http://www.snowboardsizing.org.