HOW
•
0 likes•12 views
This document provides specifications for HTR's open frame wire type low ohm power resistors. The resistors come in 6W power ratings with resistance values down to R002 ohms. Dimensions and tolerances are provided. The resistors can operate from -55°C to +325°C with suitable derating and have a temperature coefficient of resistance of ±450 ppm/°C. They are not insulated and use CuNi9010 resistance material.
Report
Share
Report
Share
Download to read offline
![PHYSICAL CONFIGURATION
HTR
TYPE
POWER
RATING
at 25°C
P
(±0.4)
H
(MAX)
ØD
(+0.2/-0)
DIMENSIONS (mm) RESISTANCE
VALUE
TYPICAL WEIGHT PER PC
(gms) BASED ON
RESISTANCE VALUE
Ød
±0.2
t (MIN)
LOW OHM
POWER
RESISTORS
HOW
OW-6 6W 25.4 16.5 2.0 2.75 1.2 R002 1.20
ELECTRICAL AND ENVIRONMENTAL CHARACTERISTICS
PARAMETER/PERFORMANCE TEST&TEST METHOD PERFORMANCE REQUIREMENTS
Power Rating (Rated Ambient Temperature) Full power dissipation at 275°C
Insulation Not insulated
Resistance Tolerances Available ±10% [K]; ±5% [J]; ±3% [H]; ±2%[G]; ±1% [F]
Temperature Range -55°C to +325°C with suitable derating as per derating curve above
Voltage Rating / Limiting Voltage / Max. Working Voltage V = P x R
Short Time Overload ∆R ± [0.75% + R0005] - Average
(5 x Rated power for 5 secs) ∆R ± [1.25% + R0005] - For resistance values near maximum range.
Temperature Co-efficient of Resistance ±450 ppm/°C
[Measured from -55°C to +125°C referenced to +30°C]
Operating Temperature -65°C to +275°C
MARKING
No Marking.
PACKING
• For OW-6 => 250 Resistors shall be packed in small box“I Type”of approximate size 70mmx70mmx70mm. & such 8 Boxes of“I Type“ will
be packed in Master carton of approx size 310mm X 205mm X 95mm.
Storage Condition (Packed):
Temp. 25°C to 35°C,Humidity 30 to 80%RH,Shelf life- 6 Months
Flore Life (Unpacked):
Temp. 25°C to 35°C, Humidity 30 to 80%RH, Floore life-15 Days
Resistance Material Data:
CuNi9010 (Depending upon Resistance value)
3.5±0.5
2±0.1
P
∅d
∅D
t (MIN)
H
(MAX)
e : info@htr-india.com
www.htr-india.com](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
HTR India - Products - Current Sense Resistors - Ceramic Encased Resistor - H...
This product is a type of Ceramic Encased Resistor, which is a type of Current Sense Resistors. Features of this product are: Flat vertical mounting type, Negligible inductance, Ceramic legs for greater stability also act as heat sink, PCB space saving resistor. This product is consumable for: Current sensing, Industrial and consumer electronics.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hmvl/
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HRE (...
This product is a type of Electron Beam Welded, which is a type of Current Sense Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hre/
HRE
This document provides information on low ohm power resistors made by HTR. It describes the physical and electrical specifications including power ratings from 2W to 12W, resistance values from R0002 to R005, tolerances from ±0.25% to ±5%, and dimensions. It also provides recommended solder profiles, environmental test results, derating curves, packaging and ordering information.
Htr india-products-current-sense-resistors-hew-english.pdf
The document describes current sense resistors of the HEW series. They are open frame PCB mounting resistors with edge welding for a reduced footprint and negligible inductance. Resistance values range from 25 milliohms to 10 ohms, with very low temperature coefficients available. Power ratings are 1W, 3W and 5W. The resistors have excellent surge current handling capability and are qualified to AEC-Q200 standards.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-rl-englis...
This document provides information on quartz silica powder fire proof ceramic encased alloy electrical resistance ribbon resistors. It describes the construction as all welded with tinned copper terminals. It provides the specifications for various models ranging from 0.5W to 10W and resistance values from 0.0015 to 80 ohms. It details the dimensions, resistance range, temperature ratings at full power dissipation, and environmental test performance requirements for the resistors. It lists typical applications as current sensing and describes the ordering information format.
Htr india-products-surface-mount-resistor-rls-english.pdf
These are ceramic encased, surface mount power resistors intended for current sensing and industrial applications. They are available in 1.5W, 3W, and 5W power ratings, and resistance ranges from 0.0015 ohms to 39 ohms. The resistors have tinned copper terminals, are made of non-flammable ceramic materials, and have all-welded construction for reliability. Electrical and environmental specifications are provided, including temperature range of -55°C to +275°C, voltage and power limits, and performance under conditions like thermal cycling, humidity, and load life. Typical applications include current sensing where the compact, robust design is needed.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-br-english
This document describes an alloy resistance element product called the BR series. It is a ceramic encased current sense/low ohm resistor with features like low inductance, fire retardant encapsulant, and tin plated copper terminals. The resistor comes in different power ratings and resistance ranges, and can be mounted in circuit boards. It has electrical and mechanical specifications to withstand conditions like high temperature, humidity, vibration, and more.
OP/OA
This document provides specifications for HTR's OA and OP series current sense resistors. It describes the construction, power ratings from 0.5W to 5W, resistance ranges from 0.0022 ohms to 100 ohms, dimensions, and temperature characteristics of the axial and PCB mount models. Application examples include power supplies, instruments, and circuits requiring non-inductive current sensing. Ordering information includes series, type, packaging, resistance value, and tolerance.
Recommended
HTR India - Products - Current Sense Resistors - Ceramic Encased Resistor - H...
This product is a type of Ceramic Encased Resistor, which is a type of Current Sense Resistors. Features of this product are: Flat vertical mounting type, Negligible inductance, Ceramic legs for greater stability also act as heat sink, PCB space saving resistor. This product is consumable for: Current sensing, Industrial and consumer electronics.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hmvl/
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HRE (...
This product is a type of Electron Beam Welded, which is a type of Current Sense Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hre/
HRE
This document provides information on low ohm power resistors made by HTR. It describes the physical and electrical specifications including power ratings from 2W to 12W, resistance values from R0002 to R005, tolerances from ±0.25% to ±5%, and dimensions. It also provides recommended solder profiles, environmental test results, derating curves, packaging and ordering information.
Htr india-products-current-sense-resistors-hew-english.pdf
The document describes current sense resistors of the HEW series. They are open frame PCB mounting resistors with edge welding for a reduced footprint and negligible inductance. Resistance values range from 25 milliohms to 10 ohms, with very low temperature coefficients available. Power ratings are 1W, 3W and 5W. The resistors have excellent surge current handling capability and are qualified to AEC-Q200 standards.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-rl-englis...
This document provides information on quartz silica powder fire proof ceramic encased alloy electrical resistance ribbon resistors. It describes the construction as all welded with tinned copper terminals. It provides the specifications for various models ranging from 0.5W to 10W and resistance values from 0.0015 to 80 ohms. It details the dimensions, resistance range, temperature ratings at full power dissipation, and environmental test performance requirements for the resistors. It lists typical applications as current sensing and describes the ordering information format.
Htr india-products-surface-mount-resistor-rls-english.pdf
These are ceramic encased, surface mount power resistors intended for current sensing and industrial applications. They are available in 1.5W, 3W, and 5W power ratings, and resistance ranges from 0.0015 ohms to 39 ohms. The resistors have tinned copper terminals, are made of non-flammable ceramic materials, and have all-welded construction for reliability. Electrical and environmental specifications are provided, including temperature range of -55°C to +275°C, voltage and power limits, and performance under conditions like thermal cycling, humidity, and load life. Typical applications include current sensing where the compact, robust design is needed.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-br-english
This document describes an alloy resistance element product called the BR series. It is a ceramic encased current sense/low ohm resistor with features like low inductance, fire retardant encapsulant, and tin plated copper terminals. The resistor comes in different power ratings and resistance ranges, and can be mounted in circuit boards. It has electrical and mechanical specifications to withstand conditions like high temperature, humidity, vibration, and more.
OP/OA
This document provides specifications for HTR's OA and OP series current sense resistors. It describes the construction, power ratings from 0.5W to 5W, resistance ranges from 0.0022 ohms to 100 ohms, dimensions, and temperature characteristics of the axial and PCB mount models. Application examples include power supplies, instruments, and circuits requiring non-inductive current sensing. Ordering information includes series, type, packaging, resistance value, and tolerance.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hcal-engl...
This document provides information on HCAL series ceramic encased power resistors. Key details include:
- They are all-welded construction with tinned copper terminals and ceramic housing for high temperature operation.
- Resistance ranges from 0.002 ohms to 20 ohms with power ratings from 1W to 20W. Custom resistance values are possible.
- They have negligible inductance making them suitable for applications requiring current sensing and pulse operation like power supplies and instrumentation.
- Electrical and environmental specifications include tight tolerance, wide temperature range, high overload capability, and protection from moisture, shock, and vibration.
HSR - Wire Wound Resistors
This document provides information on HSR and HSRC series wire wound resistors from HTR including:
- Physical configuration details for coated and ceramic encased styles with dimensions, power ratings, and temperature specifications.
- Electrical and environmental characteristics including resistance tolerances, temperature range, voltage ratings, and testing requirements.
- Typical applications involving voltage balancing and capacitor discharge.
- Ordering information is given for resistance values and packings.
OP - CURRENT SENSE / LOW OHM OPEN FRAME TYPE
This document provides specifications for HTR's OA and OP series current sense resistors. The OA series uses an axial design while the OP series is for PCB mounting. Resistance ranges from 0.5 ohms to 10 ohms with power ratings from 0.5W to 5W. Electrical characteristics include temperature coefficient, load life tests, and operating temperature range. Application examples are given for current sensing in power supplies. Ordering information includes series, type, packaging and resistance/tolerance requirements.
HTR India - Products - Current Sense Resistors - Current Sense Open Frame Res...
This document provides specifications for HTR's OF series of open frame, monolithic construction, current sense/low ohm resistors. It includes details on physical dimensions, power ratings from 1W to 10W, resistance values from R001 to R10, and temperature coefficient ratings. The document describes the different mounting tag configurations and provides application notes on selecting the appropriate tag based on resistance value and current requirements. It also includes electrical, environmental, and mechanical performance specifications for the resistors.
HTR India - Products - Wire Wound Resistors - Symmetry Resistors - HSR (English)
This product is a type of Symmetry Resistors, which is a type of Wire Wound Resistors. Features of this product are: Wire wound symmetry resistors, UL approved flame retardant coating, Stainless steel terminals. This products is consumable for Capacitor Charging and Discharging Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hsr/
Htr india-products-wire-wound-resistors-silicone-coated-resistors-haa-english...
This document summarizes the specifications of HTR's compact wire wound resistors. Key details include:
- Resistance values from 0.5 ohms to 12k ohms, tolerances as tight as 1%, power ratings from 1W to 5W
- Flame retardant silicone/cement coating and tin plated copper terminations
- Construction includes resistance wire wound on a ceramic core with fully welded terminations
- Specifications cover mechanical, electrical, environmental and pulse load performance requirements
Htr india-products-wire-wound-resistors-symmetry-resistors-hsr-english.pdf
This document provides information on HSR and HSRC series wire wound resistors from HTR including:
- Physical configuration details for coated and ceramic encased styles with dimensions, power ratings, and temperature specifications.
- Electrical and environmental characteristics including resistance tolerances, voltage ratings, temperature coefficients, and testing requirements.
- Typical applications involving voltage balancing and discharge of capacitors in high voltage circuits.
- Ordering information is given for resistance values and pack types.
Datasheet Fluke 317. Hubungi PT. Siwali Swantika 021-45850618
Datasheet Fluke Clamp Meter. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Hbm
This document provides information on HBM series low ohm power resistors. It describes their key specifications including a power rating of 5 watts, the ability to handle currents up to 100 amps, a four terminal configuration, and compliance with various industry standards. It also lists their applications in devices like current sensors, automotive systems, and power modules. Dimensional and electrical characteristic data are provided along with packaging and ordering information.
Htr india-products-surface-mount-resistors-hsvas-hsvals-english.pdf
This document describes surface mount ceramic encased resistors. It provides information on product types, power ratings, dimensions, resistance ranges, mounting and assembly data, electrical and environmental characteristics, and ordering information. The resistors use an alloy wire wound element on a heat conducting ceramic/fiber glass substrate within a fire proof ceramic housing. They are suitable for reflow soldering and applications that require surface mounted power resistors.
HTR India - Products - Surface Mount - RLS (English)
This product is a type of Surface Mount Resistor. Features of this product are: Alloy ribbon element in cylindrical ceramic body, Superior alternative to replace moulded device of identical size, Negligible inductance, Highly thermal efficient power to size ratio, Any resistance value possible within resistance range given, Low TCR. This product is consumable for current sensing in applications which include switching and linear power supplies, instruments and power amplifiers.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/rls/
Htr india-products-current-sense-resistors-electron-beam-welded-hre-english.pdf
This document provides information on low ohm power resistors made by HTR India. It describes the physical and electrical specifications including power ratings at different temperatures, resistance values, dimensions, tolerances and other parameters. It also includes application examples, features, recommended layout, testing characteristics and packaging details.
Htr india-products-current-sense-resistors-electron-beam-welded-hse-english.pdf
This document provides information on low ohm power resistors of the HSE series. It describes the physical configuration including dimensions and power ratings up to 12W at 70C. It lists typical applications, features, and specifications including tolerance, temperature range, and performance test requirements. It also provides recommended packaging, storage conditions, ordering information and diagrams.
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HTE (...
This document provides specifications for HTE series low ohm power resistors manufactured by HTR India. It includes details on physical dimensions, electrical and environmental characteristics, mechanical specifications, termination, packaging, and storage/floor life conditions. The resistors are open frame, electron beam welded, punched out resistors available from 1W to 3W and resistances from 0.0001 ohms to 0.1 ohms. They are suitable for applications such as current sense and high current uses.
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HHE (...
This product is a type of Electron Beam Welded, which is a type of Current Sense Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hhe/
HCW - WIRE WOUND RESISTORS CERAMIC ENCASED TYPE
This document describes ceramic encased wire wound resistors. Key details include:
- They provide high insulation and can operate from 1W to 20W with resistance values from R05 to 56K.
- The resistors have a ceramic housing, inorganic fire retardant encapsulant, and tin plated copperwound elements on a ceramic substrate.
- They are compatible with UL standards and can operate from -55°C to +275°C with derating. Resistance tolerances range from ±10% to ±1%.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-english
This document provides specifications for ceramic encased wire wound resistors. Key details include:
- Resistors have a very high degree of insulation and can operate from -55°C to +275°C. Resistance ranges from R05 to 56K Ohms.
- Models are available from 1W to 20W and have a ceramic housing with flame proof, high temperature properties.
- Resistors undergo various tests to ensure low temperature, high overload capability, long term stability and reliability under different environmental conditions.
- Precise resistance tolerances and mechanical robustness of terminations are also specified.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-english.pdf
This document provides specifications for ceramic encased wire wound resistors. Key details include:
- Resistors have a very high degree of insulation and can operate from -55°C to +275°C. Resistance ranges from R05 to 56K Ohms.
- Models are available from 1W to 20W and have a ceramic housing with flame proof, high temperature properties.
- Resistors undergo various tests to ensure low temperature, high overload capability, long term stability and reliability under different environmental conditions.
- Precise resistance tolerances and mechanical robustness of terminations are also specified.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-englishHtr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-english
RL - CURRENT SENSE / LOW OHM CERAMIC ENCASED TYPE
The document provides specifications for HTR's RL series of ceramic encased power resistors. The resistors come in power ratings from 0.5W to 10W, resistance values from 0.0015 ohms to 80 ohms, and dimensions ranging from 8mm to 60mm. They offer benefits like negligible inductance, high thermal efficiency, and resistance to temperatures up to 275°C. The document also provides detailed information on electrical characteristics, performance testing requirements, applications, and ordering options.
HMW - WIRE WOUND RESISTORS CERAMIC ENCASED TYPE
SPACE SAVER
Slim Type Vertical Mounting
• E.D.D. CR. Mild Steel.
• Undercoat of copper, middle coat of nickel &
top coat of dull tin plating.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hia-english
This document describes wire wound resistors that have several key features:
- A ceramic core with a silicone coating for flame retardancy and high thermal conductivity.
- Resistance values from 0.5W to 20W that can have tolerances as close as 0.25% and TCR as low as 20ppm/°C.
- They are suitable for industrial and professional applications requiring precision power resistors that can operate at high ambient temperatures.
More Related Content
What's hot
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hcal-engl...
This document provides information on HCAL series ceramic encased power resistors. Key details include:
- They are all-welded construction with tinned copper terminals and ceramic housing for high temperature operation.
- Resistance ranges from 0.002 ohms to 20 ohms with power ratings from 1W to 20W. Custom resistance values are possible.
- They have negligible inductance making them suitable for applications requiring current sensing and pulse operation like power supplies and instrumentation.
- Electrical and environmental specifications include tight tolerance, wide temperature range, high overload capability, and protection from moisture, shock, and vibration.
HSR - Wire Wound Resistors
This document provides information on HSR and HSRC series wire wound resistors from HTR including:
- Physical configuration details for coated and ceramic encased styles with dimensions, power ratings, and temperature specifications.
- Electrical and environmental characteristics including resistance tolerances, temperature range, voltage ratings, and testing requirements.
- Typical applications involving voltage balancing and capacitor discharge.
- Ordering information is given for resistance values and packings.
OP - CURRENT SENSE / LOW OHM OPEN FRAME TYPE
This document provides specifications for HTR's OA and OP series current sense resistors. The OA series uses an axial design while the OP series is for PCB mounting. Resistance ranges from 0.5 ohms to 10 ohms with power ratings from 0.5W to 5W. Electrical characteristics include temperature coefficient, load life tests, and operating temperature range. Application examples are given for current sensing in power supplies. Ordering information includes series, type, packaging and resistance/tolerance requirements.
HTR India - Products - Current Sense Resistors - Current Sense Open Frame Res...
This document provides specifications for HTR's OF series of open frame, monolithic construction, current sense/low ohm resistors. It includes details on physical dimensions, power ratings from 1W to 10W, resistance values from R001 to R10, and temperature coefficient ratings. The document describes the different mounting tag configurations and provides application notes on selecting the appropriate tag based on resistance value and current requirements. It also includes electrical, environmental, and mechanical performance specifications for the resistors.
HTR India - Products - Wire Wound Resistors - Symmetry Resistors - HSR (English)
This product is a type of Symmetry Resistors, which is a type of Wire Wound Resistors. Features of this product are: Wire wound symmetry resistors, UL approved flame retardant coating, Stainless steel terminals. This products is consumable for Capacitor Charging and Discharging Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hsr/
Htr india-products-wire-wound-resistors-silicone-coated-resistors-haa-english...
This document summarizes the specifications of HTR's compact wire wound resistors. Key details include:
- Resistance values from 0.5 ohms to 12k ohms, tolerances as tight as 1%, power ratings from 1W to 5W
- Flame retardant silicone/cement coating and tin plated copper terminations
- Construction includes resistance wire wound on a ceramic core with fully welded terminations
- Specifications cover mechanical, electrical, environmental and pulse load performance requirements
Htr india-products-wire-wound-resistors-symmetry-resistors-hsr-english.pdf
This document provides information on HSR and HSRC series wire wound resistors from HTR including:
- Physical configuration details for coated and ceramic encased styles with dimensions, power ratings, and temperature specifications.
- Electrical and environmental characteristics including resistance tolerances, voltage ratings, temperature coefficients, and testing requirements.
- Typical applications involving voltage balancing and discharge of capacitors in high voltage circuits.
- Ordering information is given for resistance values and pack types.
Datasheet Fluke 317. Hubungi PT. Siwali Swantika 021-45850618
Datasheet Fluke Clamp Meter. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Hbm
This document provides information on HBM series low ohm power resistors. It describes their key specifications including a power rating of 5 watts, the ability to handle currents up to 100 amps, a four terminal configuration, and compliance with various industry standards. It also lists their applications in devices like current sensors, automotive systems, and power modules. Dimensional and electrical characteristic data are provided along with packaging and ordering information.
Htr india-products-surface-mount-resistors-hsvas-hsvals-english.pdf
This document describes surface mount ceramic encased resistors. It provides information on product types, power ratings, dimensions, resistance ranges, mounting and assembly data, electrical and environmental characteristics, and ordering information. The resistors use an alloy wire wound element on a heat conducting ceramic/fiber glass substrate within a fire proof ceramic housing. They are suitable for reflow soldering and applications that require surface mounted power resistors.
HTR India - Products - Surface Mount - RLS (English)
This product is a type of Surface Mount Resistor. Features of this product are: Alloy ribbon element in cylindrical ceramic body, Superior alternative to replace moulded device of identical size, Negligible inductance, Highly thermal efficient power to size ratio, Any resistance value possible within resistance range given, Low TCR. This product is consumable for current sensing in applications which include switching and linear power supplies, instruments and power amplifiers.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/rls/
Htr india-products-current-sense-resistors-electron-beam-welded-hre-english.pdf
This document provides information on low ohm power resistors made by HTR India. It describes the physical and electrical specifications including power ratings at different temperatures, resistance values, dimensions, tolerances and other parameters. It also includes application examples, features, recommended layout, testing characteristics and packaging details.
Htr india-products-current-sense-resistors-electron-beam-welded-hse-english.pdf
This document provides information on low ohm power resistors of the HSE series. It describes the physical configuration including dimensions and power ratings up to 12W at 70C. It lists typical applications, features, and specifications including tolerance, temperature range, and performance test requirements. It also provides recommended packaging, storage conditions, ordering information and diagrams.
What's hot (13)
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hcal-engl...
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hcal-engl...
HTR India - Products - Current Sense Resistors - Current Sense Open Frame Res...
HTR India - Products - Current Sense Resistors - Current Sense Open Frame Res...
HTR India - Products - Wire Wound Resistors - Symmetry Resistors - HSR (English)
HTR India - Products - Wire Wound Resistors - Symmetry Resistors - HSR (English)
Htr india-products-wire-wound-resistors-silicone-coated-resistors-haa-english...
Htr india-products-wire-wound-resistors-silicone-coated-resistors-haa-english...
Htr india-products-wire-wound-resistors-symmetry-resistors-hsr-english.pdf
Htr india-products-wire-wound-resistors-symmetry-resistors-hsr-english.pdf
Datasheet Fluke 317. Hubungi PT. Siwali Swantika 021-45850618
Datasheet Fluke 317. Hubungi PT. Siwali Swantika 021-45850618
Htr india-products-surface-mount-resistors-hsvas-hsvals-english.pdf
Htr india-products-surface-mount-resistors-hsvas-hsvals-english.pdf
HTR India - Products - Surface Mount - RLS (English)
HTR India - Products - Surface Mount - RLS (English)
Htr india-products-current-sense-resistors-electron-beam-welded-hre-english.pdf
Htr india-products-current-sense-resistors-electron-beam-welded-hre-english.pdf
Htr india-products-current-sense-resistors-electron-beam-welded-hse-english.pdf
Htr india-products-current-sense-resistors-electron-beam-welded-hse-english.pdf
Similar to HOW
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HTE (...
This document provides specifications for HTE series low ohm power resistors manufactured by HTR India. It includes details on physical dimensions, electrical and environmental characteristics, mechanical specifications, termination, packaging, and storage/floor life conditions. The resistors are open frame, electron beam welded, punched out resistors available from 1W to 3W and resistances from 0.0001 ohms to 0.1 ohms. They are suitable for applications such as current sense and high current uses.
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HHE (...
This product is a type of Electron Beam Welded, which is a type of Current Sense Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hhe/
HCW - WIRE WOUND RESISTORS CERAMIC ENCASED TYPE
This document describes ceramic encased wire wound resistors. Key details include:
- They provide high insulation and can operate from 1W to 20W with resistance values from R05 to 56K.
- The resistors have a ceramic housing, inorganic fire retardant encapsulant, and tin plated copperwound elements on a ceramic substrate.
- They are compatible with UL standards and can operate from -55°C to +275°C with derating. Resistance tolerances range from ±10% to ±1%.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-english
This document provides specifications for ceramic encased wire wound resistors. Key details include:
- Resistors have a very high degree of insulation and can operate from -55°C to +275°C. Resistance ranges from R05 to 56K Ohms.
- Models are available from 1W to 20W and have a ceramic housing with flame proof, high temperature properties.
- Resistors undergo various tests to ensure low temperature, high overload capability, long term stability and reliability under different environmental conditions.
- Precise resistance tolerances and mechanical robustness of terminations are also specified.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-english.pdf
This document provides specifications for ceramic encased wire wound resistors. Key details include:
- Resistors have a very high degree of insulation and can operate from -55°C to +275°C. Resistance ranges from R05 to 56K Ohms.
- Models are available from 1W to 20W and have a ceramic housing with flame proof, high temperature properties.
- Resistors undergo various tests to ensure low temperature, high overload capability, long term stability and reliability under different environmental conditions.
- Precise resistance tolerances and mechanical robustness of terminations are also specified.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-englishHtr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-english
RL - CURRENT SENSE / LOW OHM CERAMIC ENCASED TYPE
The document provides specifications for HTR's RL series of ceramic encased power resistors. The resistors come in power ratings from 0.5W to 10W, resistance values from 0.0015 ohms to 80 ohms, and dimensions ranging from 8mm to 60mm. They offer benefits like negligible inductance, high thermal efficiency, and resistance to temperatures up to 275°C. The document also provides detailed information on electrical characteristics, performance testing requirements, applications, and ordering options.
HMW - WIRE WOUND RESISTORS CERAMIC ENCASED TYPE
SPACE SAVER
Slim Type Vertical Mounting
• E.D.D. CR. Mild Steel.
• Undercoat of copper, middle coat of nickel &
top coat of dull tin plating.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hia-english
This document describes wire wound resistors that have several key features:
- A ceramic core with a silicone coating for flame retardancy and high thermal conductivity.
- Resistance values from 0.5W to 20W that can have tolerances as close as 0.25% and TCR as low as 20ppm/°C.
- They are suitable for industrial and professional applications requiring precision power resistors that can operate at high ambient temperatures.
HHE - Low OHM Power Resistors
This document summarizes the specifications and characteristics of HHE series low ohm power resistors:
- Open frame electron beam welded resistors available in power ratings from 4W to 10W and resistance values from R0003 to R002.
- Suitable for applications requiring high current carrying capability like power tools, automotive power modules, and frequency converters.
- Features include constant power output at high temperatures, sturdy copper connectors, and excellent long-term stability.
HMW - WIRE WOUND RESISTORS CERAMIC ENCASED TYPE
Slim Type Vertical Mounting
• E.D.D. CR. Mild Steel.
• Undercoat of copper, middle coat of nickel &
top coat of dull tin plating.
•5W & 9W
• R18 to 18K
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HEB (...
This product is a Current Sense Resistors of the type Electron Beam Welded.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/heb/
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hmw-english.pdf
This document summarizes the specifications of HTR's wire wound resistors. It describes the physical and electrical characteristics, performance requirements when subjected to various tests, ordering information and packaging details. The resistors come in 5W and 9W ratings, resistance values from 100 ohms to 18k ohms, and tolerances of ±10%, ±5%, ±3% and ±2%. They use ceramic encased casings and are qualified to AEC-Q200 standards.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hmw-english
This document summarizes the specifications of HTR's wire wound resistors. It describes the physical and electrical characteristics, performance requirements when subjected to various tests, ordering information and packaging details. The resistors come in 5W and 9W ratings, resistance values from 100 ohms to 18k ohms, and tolerances of ±10%, ±5%, ±3% and ±2%. They use ceramic encased casings and are qualified to AEC-Q200 standards.
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hmw-english
This document summarizes the specifications of HTR's wire wound resistors. It describes the physical and electrical characteristics, performance requirements when subjected to various tests, mechanical specifications, ordering information, packing details, and notes. The resistors come in 5W and 9W ratings, resistance values from 100 ohms to 18k ohms, and tolerances of ±10%, ±5%, ±3%, ±2%, ±1%. They have ceramic encased casings and terminate with enamelled copper wire leads.
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HEE (...
This product is a type of Electron Beam Welded, which is a type of Current Sense Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hee/
HOS.pdf
This document provides information on low ohm power resistors including:
- Resistance values range from R001 to R05 ohms.
- Open frame strip type construction with 2W to 5W power ratings.
- Dimensions and specifications for mounting, derating curves, and environmental testing requirements.
- Recommended PCB layouts including Kelvin 4-terminal connection for precision applications.
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HSE (...
This product is a type of Electron Beam Welded, which is a type of Current Sense Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hse/
HTR India - Products - Wire Wound Resistors - Ceramic Encased Resistor - HMW ...
HMW is a Wire Wound Resistor of the type Ceramic Encased Resistor.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hmw/
Htr india-products-surface-mount-resistor-rls-english
These are ceramic encased, surface mount power resistors intended for current sense and industrial applications. They are available in 1.5W, 3W, and 5W power ratings, and resistance ranges from 0.0015 ohms to 39 ohms. The resistors have tinned copper terminals, are made of non-flammable ceramic materials, and have an all-welded construction. They are tested and qualified to various industry standards for electrical, thermal, and environmental performance.
Similar to HOW (20)
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HTE (...
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HTE (...
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HHE (...
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HHE (...
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-english.pdf
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-english.pdf
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hcw-english
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hia-english
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hia-english
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HEB (...
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HEB (...
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hmw-english.pdf
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hmw-english.pdf
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hmw-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hmw-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hmw-english
Htr india-products-wire-wound-resistors-ceramic-encased-resistor-hmw-english
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HEE (...
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HEE (...
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HSE (...
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HSE (...
HTR India - Products - Wire Wound Resistors - Ceramic Encased Resistor - HMW ...
HTR India - Products - Wire Wound Resistors - Ceramic Encased Resistor - HMW ...
Htr india-products-surface-mount-resistor-rls-english
Htr india-products-surface-mount-resistor-rls-english
Recently uploaded
What is an RPA CoE? Session 1 – CoE Vision
In the first session, we will review the organization's vision and how this has an impact on the COE Structure.
Topics covered:
• The role of a steering committee
• How do the organization’s priorities determine CoE Structure?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
Lee Barnes - Path to Becoming an Effective Test Automation Engineer.pdf
So… you want to become a Test Automation Engineer (or hire and develop one)? While there’s quite a bit of information available about important technical and tool skills to master, there’s not enough discussion around the path to becoming an effective Test Automation Engineer that knows how to add VALUE. In my experience this had led to a proliferation of engineers who are proficient with tools and building frameworks but have skill and knowledge gaps, especially in software testing, that reduce the value they deliver with test automation.
In this talk, Lee will share his lessons learned from over 30 years of working with, and mentoring, hundreds of Test Automation Engineers. Whether you’re looking to get started in test automation or just want to improve your trade, this talk will give you a solid foundation and roadmap for ensuring your test automation efforts continuously add value. This talk is equally valuable for both aspiring Test Automation Engineers and those managing them! All attendees will take away a set of key foundational knowledge and a high-level learning path for leveling up test automation skills and ensuring they add value to their organizations.
JavaLand 2024: Application Development Green Masterplan
My presentation slides I used at JavaLand 2024
Day 2 - Intro to UiPath Studio Fundamentals
In our second session, we shall learn all about the main features and fundamentals of UiPath Studio that enable us to use the building blocks for any automation project.
📕 Detailed agenda:
Variables and Datatypes
Workflow Layouts
Arguments
Control Flows and Loops
Conditional Statements
💻 Extra training through UiPath Academy:
Variables, Constants, and Arguments in Studio
Control Flow in Studio
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host
"Choosing proper type of scaling", Olena Syrota
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
How we managed to grow and scale a RAG application from zero to thousands of users in 7 months. Lessons from technical challenges around managing high load for LLMs, RAGs and Vector databases.
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
This LF Energy webinar took place June 20, 2024. It featured:
-Alex Thornton, LF Energy
-Hallie Cramer, Google
-Daniel Roesler, UtilityAPI
-Henry Richardson, WattTime
In response to the urgency and scale required to effectively address climate change, open source solutions offer significant potential for driving innovation and progress. Currently, there is a growing demand for standardization and interoperability in energy data and modeling. Open source standards and specifications within the energy sector can also alleviate challenges associated with data fragmentation, transparency, and accessibility. At the same time, it is crucial to consider privacy and security concerns throughout the development of open source platforms.
This webinar will delve into the motivations behind establishing LF Energy’s Carbon Data Specification Consortium. It will provide an overview of the draft specifications and the ongoing progress made by the respective working groups.
Three primary specifications will be discussed:
-Discovery and client registration, emphasizing transparent processes and secure and private access
-Customer data, centering around customer tariffs, bills, energy usage, and full consumption disclosure
-Power systems data, focusing on grid data, inclusive of transmission and distribution networks, generation, intergrid power flows, and market settlement data
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
The typical problem in product engineering is not bad strategy, so much as “no strategy”. This leads to confusion, lack of motivation, and incoherent action. The next time you look for a strategy and find an empty space, instead of waiting for it to be filled, I will show you how to fill it in yourself. If you’re wrong, it forces a correction. If you’re right, it helps create focus. I’ll share how I’ve approached this in the past, both what works and lessons for what didn’t work so well.
Northern Engraving | Nameplate Manufacturing Process - 2024
Manufacturing custom quality metal nameplates and badges involves several standard operations. Processes include sheet prep, lithography, screening, coating, punch press and inspection. All decoration is completed in the flat sheet with adhesive and tooling operations following. The possibilities for creating unique durable nameplates are endless. How will you create your brand identity? We can help!
AWS Certified Solutions Architect Associate (SAA-C03)
AWS Certified Solutions Architect Associate (SAA-C03)
AppSec PNW: Android and iOS Application Security with MobSF
Mobile Security Framework - MobSF is a free and open source automated mobile application security testing environment designed to help security engineers, researchers, developers, and penetration testers to identify security vulnerabilities, malicious behaviours and privacy concerns in mobile applications using static and dynamic analysis. It supports all the popular mobile application binaries and source code formats built for Android and iOS devices. In addition to automated security assessment, it also offers an interactive testing environment to build and execute scenario based test/fuzz cases against the application.
This talk covers:
Using MobSF for static analysis of mobile applications.
Interactive dynamic security assessment of Android and iOS applications.
Solving Mobile app CTF challenges.
Reverse engineering and runtime analysis of Mobile malware.
How to shift left and integrate MobSF/mobsfscan SAST and DAST in your build pipeline.
Session 1 - Intro to Robotic Process Automation.pdf
👉 Check out our full 'Africa Series - Automation Student Developers (EN)' page to register for the full program:
https://bit.ly/Automation_Student_Kickstart
In this session, we shall introduce you to the world of automation, the UiPath Platform, and guide you on how to install and setup UiPath Studio on your Windows PC.
📕 Detailed agenda:
What is RPA? Benefits of RPA?
RPA Applications
The UiPath End-to-End Automation Platform
UiPath Studio CE Installation and Setup
💻 Extra training through UiPath Academy:
Introduction to Automation
UiPath Business Automation Platform
Explore automation development with UiPath Studio
👉 Register here for our upcoming Session 2 on June 20: Introduction to UiPath Studio Fundamentals: https://community.uipath.com/events/details/uipath-lagos-presents-session-2-introduction-to-uipath-studio-fundamentals/
Essentials of Automations: Exploring Attributes & Automation Parameters
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
The Microsoft 365 Migration Tutorial For Beginner.pptx
This presentation will help you understand the power of Microsoft 365. However, we have mentioned every productivity app included in Office 365. Additionally, we have suggested the migration situation related to Office 365 and how we can help you.
You can also read: https://www.systoolsgroup.com/updates/office-365-tenant-to-tenant-migration-step-by-step-complete-guide/
What is an RPA CoE? Session 2 – CoE Roles
In this session, we will review the players involved in the CoE and how each role impacts opportunities.
Topics covered:
• What roles are essential?
• What place in the automation journey does each role play?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
Harnessing the Power of NLP and Knowledge Graphs for Opioid Research
Gursev Pirge, PhD
Senior Data Scientist - JohnSnowLabs
A Deep Dive into ScyllaDB's Architecture
This talk will cover ScyllaDB Architecture from the cluster-level view and zoom in on data distribution and internal node architecture. In the process, we will learn the secret sauce used to get ScyllaDB's high availability and superior performance. We will also touch on the upcoming changes to ScyllaDB architecture, moving to strongly consistent metadata and tablets.
Introducing BoxLang : A new JVM language for productivity and modularity!
Just like life, our code must adapt to the ever changing world we live in. From one day coding for the web, to the next for our tablets or APIs or for running serverless applications. Multi-runtime development is the future of coding, the future is to be dynamic. Let us introduce you to BoxLang.
Dynamic. Modular. Productive.
BoxLang redefines development with its dynamic nature, empowering developers to craft expressive and functional code effortlessly. Its modular architecture prioritizes flexibility, allowing for seamless integration into existing ecosystems.
Interoperability at its Core
With 100% interoperability with Java, BoxLang seamlessly bridges the gap between traditional and modern development paradigms, unlocking new possibilities for innovation and collaboration.
Multi-Runtime
From the tiny 2m operating system binary to running on our pure Java web server, CommandBox, Jakarta EE, AWS Lambda, Microsoft Functions, Web Assembly, Android and more. BoxLang has been designed to enhance and adapt according to it's runnable runtime.
The Fusion of Modernity and Tradition
Experience the fusion of modern features inspired by CFML, Node, Ruby, Kotlin, Java, and Clojure, combined with the familiarity of Java bytecode compilation, making BoxLang a language of choice for forward-thinking developers.
Empowering Transition with Transpiler Support
Transitioning from CFML to BoxLang is seamless with our JIT transpiler, facilitating smooth migration and preserving existing code investments.
Unlocking Creativity with IDE Tools
Unleash your creativity with powerful IDE tools tailored for BoxLang, providing an intuitive development experience and streamlining your workflow. Join us as we embark on a journey to redefine JVM development. Welcome to the era of BoxLang.
Leveraging the Graph for Clinical Trials and Standards
Katja Glaß
OpenStudyBuilder Community Manager - Katja Glaß Consulting
Marius Conjeaud
Principal Consultant - Neo4j
Recently uploaded (20)
Lee Barnes - Path to Becoming an Effective Test Automation Engineer.pdf
Lee Barnes - Path to Becoming an Effective Test Automation Engineer.pdf
JavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green Masterplan
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
Northern Engraving | Nameplate Manufacturing Process - 2024
Northern Engraving | Nameplate Manufacturing Process - 2024
AWS Certified Solutions Architect Associate (SAA-C03)
AWS Certified Solutions Architect Associate (SAA-C03)
AppSec PNW: Android and iOS Application Security with MobSF
AppSec PNW: Android and iOS Application Security with MobSF
Session 1 - Intro to Robotic Process Automation.pdf
Session 1 - Intro to Robotic Process Automation.pdf
Essentials of Automations: Exploring Attributes & Automation Parameters
Essentials of Automations: Exploring Attributes & Automation Parameters
The Microsoft 365 Migration Tutorial For Beginner.pptx
The Microsoft 365 Migration Tutorial For Beginner.pptx
Harnessing the Power of NLP and Knowledge Graphs for Opioid Research
Harnessing the Power of NLP and Knowledge Graphs for Opioid Research
Introducing BoxLang : A new JVM language for productivity and modularity!
Introducing BoxLang : A new JVM language for productivity and modularity!
Leveraging the Graph for Clinical Trials and Standards
Leveraging the Graph for Clinical Trials and Standards
HOW
- 1. LOW OHM POWER RESISTORS OPEN FRAME WIRE TYPE HOW SERIES • 6W • R002 e : info@htr-india.com www.htr-india.com
- 2. PHYSICAL CONFIGURATION HTR TYPE POWER RATING at 25°C P (±0.4) H (MAX) ØD (+0.2/-0) DIMENSIONS (mm) RESISTANCE VALUE TYPICAL WEIGHT PER PC (gms) BASED ON RESISTANCE VALUE Ød ±0.2 t (MIN) LOW OHM POWER RESISTORS HOW OW-6 6W 25.4 16.5 2.0 2.75 1.2 R002 1.20 ELECTRICAL AND ENVIRONMENTAL CHARACTERISTICS PARAMETER/PERFORMANCE TEST&TEST METHOD PERFORMANCE REQUIREMENTS Power Rating (Rated Ambient Temperature) Full power dissipation at 275°C Insulation Not insulated Resistance Tolerances Available ±10% [K]; ±5% [J]; ±3% [H]; ±2%[G]; ±1% [F] Temperature Range -55°C to +325°C with suitable derating as per derating curve above Voltage Rating / Limiting Voltage / Max. Working Voltage V = P x R Short Time Overload ∆R ± [0.75% + R0005] - Average (5 x Rated power for 5 secs) ∆R ± [1.25% + R0005] - For resistance values near maximum range. Temperature Co-efficient of Resistance ±450 ppm/°C [Measured from -55°C to +125°C referenced to +30°C] Operating Temperature -65°C to +275°C MARKING No Marking. PACKING • For OW-6 => 250 Resistors shall be packed in small box“I Type”of approximate size 70mmx70mmx70mm. & such 8 Boxes of“I Type“ will be packed in Master carton of approx size 310mm X 205mm X 95mm. Storage Condition (Packed): Temp. 25°C to 35°C,Humidity 30 to 80%RH,Shelf life- 6 Months Flore Life (Unpacked): Temp. 25°C to 35°C, Humidity 30 to 80%RH, Floore life-15 Days Resistance Material Data: CuNi9010 (Depending upon Resistance value) 3.5±0.5 2±0.1 P ∅d ∅D t (MIN) H (MAX) e : info@htr-india.com www.htr-india.com