10. FAITECH 143 - FAITECH 195 - FAITECH 275 thermo black-out films 05.08.09 WHITE HOT MELT “ side “ BLACK-OUT “inner layer “ WHITE HOT MELT “ side” Customer Textile FAITECH 143 - 195 - 275 ( three layers films) Customer Textile < 100°C > 150°C < 100°C FAITECH 143 - FAITECH 195 - FAITECH 275 Thermo black-out films to be heat-laminated in between two substrates. They bond with a large variety of materials ” Fabrics, Nonwovens and Papers”. While Faitech 143-195-275 films are thermo-laminated, the 2 white external thermo-adhesive layers will melt and bond to the surface of the substrates. Due to the higher melting point, the inner layer remains compact without pin-holes and assures the total black-out barrier. Additionally FAITECH 275 resists to sublimation print high temperature and provides a really good blooming barrier to the sublimation inks. FAITECH 143 -195 Available also in large width (up to 3.000 mm). FAITECH 275 is available up to 1800 mm
11.
12. 05.08.09 Back-lit diffusion layer Light-diffusion properties of laminated materials Two-layers thermoplastic film to be heat-laminated onto a substrate. It bonds with a large variety of materials: i.e. Fabrics, Nonwovens and Papers. While the film is heated, the thermoplastic adhesive layer starts to melt and bonds to the surface of textile fabrics and the top layer remains closed, improving the spreading of the light behind the laminated and printed advertising material in back-lit frames. The laminated structure will keep a good elasticity, needed for fixing in the frames. It’s scratchproof and it provides a good water/oil/dust proofness. 145 - 155 °C 85 - 100 °C WHITE HOT MELT layer FAITGOM TM 787 ( 2-layers film) Textile FAITGOM TM 787 40 gr/sqm
13. 05.08.09 Textile Teflonized heated drum Siliconised Nomex belt Pressure roller Faitgom TM 787 Laminated product to winding unit 130 – 150°C How to use it back-lite film.
14.
15. 05.08.09 Textile Teflonized heated drum Siliconised Nomex belt Pressure roller ( eventually printed ) Easy Tech 414 without carrier Laminated product to winding unit 130 – 150°C How to use varnish film.
16. 05.08.09 Section: “ Alluminized” side Hot melt layer EASY TECH 03 EASY TECH 03 ( 3 layers film) customer Textile > 220 °C 145 - 155 °C Top protection layer Chromatic effect on laminated materials Metallized substrate in between 2 thermoplastic layers to be heat-laminated onto a substrate. It bonds with a large variety of materials: i.e. Fabrics, Nonwovens and Papers. While the film is heated, the thermoplastic adhesive layer starts to melt and bonds to the surface of textile fabrics and the metallic side remain protected by top layer. The process is solvent free. The laminated structure will keep a good metallized surface effect. Mirror-like aspect on solid substrates. Possible sublimation printing on Top protective layer to create fashionable images & designs It provides a good water/oil/dust proofness.
17. 05.08.09 Textile Teflonized heated drum Siliconised Nomex belt Pressure roller EASY TECH 03 Laminated product to winding unit 160 – 180°C How to use it chromatic film.
18. Films Range for Graphic and Black-out Industry 05.08.09
19. FAIT PLAST Via Industriale Traversa prima nr.2 25060 Cellatica (Brescia) - Italy tel. +39 030 31.23.00 fax +39 030 32.39.111
