Gel Joints DSG Canusa CGEL 1000
•
0 likes•2,361 views
The document describes cable gel products for installing power, control, and communication cables. It summarizes that the CGEL 2000 and CGEL 1000 product lines provide reliable straight or 30-degree branch connections for 0.6/1kV extruded cables. The products have a tough, flame-retarded outer case filled with cross-linked polymer gel that meets various industry standards and has unlimited shelf life. Tables then list specifications for the different CGEL models including their applications and cable size capacities.
Report
Share
Report
Share
Download to read offline
Recommended
Marechal DSN3 Plugs, Sockets (Decontactors) 32Amps - Marechal DSN3 Decontacto...
Marechal DSN3 Plugs, Sockets (Decontactors) 32Amps - Marechal DSN3 Decontacto...Thorne & Derrick International
This document provides information on DSN3 electrical connection systems including:
- Contact details for the manufacturer at the top
- Specifications for typical wall mounting sockets and plugs that have IP66/IP67 protection and can handle currents up to 32A
- Details on the load-break capability of their disconnectors that comply with relevant standards
- A table listing available inlet and socket-outlet part numbers for various voltages and configurations
- Information on optional boxes, sleeves, handles, adapters and accessories Marechal DSN6 Plugs, Sockets (Decontactors) 63Amps - Marechal DSN6 Decontacto...
Marechal DSN6 Plugs, Sockets (Decontactors) 63Amps - Marechal DSN6 Decontacto...Thorne & Derrick International
Marechal DSN range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 20amps-63amps. Marechal DSN range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes) :
*20amp-63amp current ratings *500v-1000v a.c.
*IP66/IP67 water and dust tight plug assemblies
*AC-22 / AC-23 load breaking capability
*GRP casings, chemical and IK08 shock resistant
*Resistant to temperature changes -40 to +60 Degrees Celsius
*Equipped with silver-nickel butt contacts for lifetime reliability
T&D UK also stock distribute the ATEX Certified range of Marechal Hazardous Area plugs and sockets (decontactors) for Zones 1, 2, 21 and 22 installation.
Marechal Plugs & Sockets : Press Release Belgian vegetable preparation company, Legumex, uses around 100,000m3 of water annually for the cleaning and preparation of fresh vegetables - this amount of water and 24/7 operation 365 days a year, means that their electrical plug and socket connections must be completely water-tight, robust and reliable. Legumex uses Marechal DSN1 Decontactor plugs and sockets on the permanent power supplies to the production line and in the maintenance workshop. Rated for currents of up to 20A, Marechal DSN1 Decontactors are sealed to IP66/67 making them completely watertight even for pressure-washing, when connected and disconnected. An integrated switch mechanism means that the maintenance team can immediately and safely disconnect or connect equipment without the need for a qualified electrician. This makes maintenance faster and significantly more cost-effective than the alternative of hard wired equipment. Marechal plugs and sockets are made from glass-reinforced polyester body, silver-nickel butt contacts and vibration-proof terminals - Marechal Decontactors are resistant to corrosion and shock, providing long-term reliability, even after thousands of connections and disconnections.Marechal DS3 GRP Plugs, Inlets & Sockets 50 Amps - Marechal DS Decontactor Fo...
Marechal DS3 GRP Plugs, Inlets & Sockets 50 Amps - Marechal DS Decontactor Fo...Thorne & Derrick International
Marechal DS3 50Amp Plug & Socket (Decontactors) for Low Voltage Industrial Power Supply and Motor Connections
Marechal DS range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 30amps-250amps. Marechal DS range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes) :
*30amp-250amp current ratings
*500v-1000v a.c.
*IP54/IP55 water and dust tight plug assemblies (IP66/IP67 available)
*AC-22 / AC-23 load breaking capability
*GRP casings, chemical and IK08 shock resistant
*Metal casings, corrosion resistant, IK09 shock resistant
*Resistant to temperature changes -40 to +60 Degrees Celsius
*Equipped with silver-nickel butt contacts for lifetime reliability
T&D UK also stock distribute the ATEX Certified range of Marechal Hazardous Area plugs and sockets (decontactors) for Zones 1, 2, 21 and 22 installation.
Marechal Electric pioneered the use of high performance, silver-nickel butt contacts in electrical plug and socket systems (decontactors), which are now available for applications from simple compact multi-pin to heavy duty 600A plug connections. Marechal technology is used across a range of demanding environments such as the food and drink, nuclear power, heavy industry, infrastructure and ATEX hazardous area sectors. Marechal decontactors are an effective alternative to both hard-wired equipment and pin/sleeve type contacts, the decontactor is a highly flexible method of connecting and disconnecting electrical equipment at the press of a latch – safely. Marechal Electric brought the decontactor, the high performance industrial plug connector with integral AC21 switch, to the electrical market.
CATU Portable Earthing & Short Circuiting
This document provides information on IEC short-circuiting and earthing systems for MV substations, including equipment for installation on permanent fixed points and bare conductors. It lists various earth clamps, connection sets, and accessories with their reference numbers, descriptions, ratings, and packaging details. Installation involves using earth clamps and connection sets with extra-flexible copper cables to bond fixed points and bare conductors to earth.
Marechal DS1 GRP Plugs, Inlets & Sockets 30 Amps - Marechal DS Decontactor Fo...
Marechal DS1 GRP Plugs, Inlets & Sockets 30 Amps - Marechal DS Decontactor Fo...Thorne & Derrick International
This document provides information on electrical connection devices and accessories from Thorne and Derrick, including:
- Wall mounting sockets and plugs rated for 30A at IP55 protection.
- Configurations for straight or angled handles, wall boxes, and sleeves.
- Options for auxiliary contacts, padlocking, E-stop buttons, and inlet caps.
- Industrial-domestic adapters and extension cables with IP44 plugs and IP55 sockets.
- Contact information for Thorne and Derrick is listed at the bottom.Marechal DS2 METAL Plugs, Inlets & Sockets 250 Amps - Marechal DS Decontactor...
Marechal DS2 METAL Plugs, Inlets & Sockets 250 Amps - Marechal DS Decontactor...Thorne & Derrick International
Marechal DS2 250Amp Plug & Socket (Decontactors) for Low Voltage Industrial Power Supply and Motor Connections
Marechal DS range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 30amps-250amps. Marechal DS range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes) :
*30amp-250amp current ratings
*500v-1000v a.c.
*IP54/IP55 water and dust tight plug assemblies (IP66/IP67 available)
*AC-22 / AC-23 load breaking capability
*GRP casings, chemical and IK08 shock resistant
*Metal casings, corrosion resistant, IK09 shock resistant
*Resistant to temperature changes -40 to +60 Degrees Celsius
*Equipped with silver-nickel butt contacts for lifetime reliability
T&D UK also stock distribute the ATEX Certified range of Marechal Hazardous Area plugs and sockets (decontactors) for Zones 1, 2, 21 and 22 installation.
• Decontactors replace out-dated hard-wired ground-box connections
• Up to 250A power and control signals in the same plug connector
• Watertight and dust-tight with IP66/67 sealing as standard
• Fast and safe disconnection without the need for a qualified electrician
• Reduces down-time and minimises maintenance time and cost
Marechal DS2 decontactors (plugs and sockets) have been fitted to quay-side cranes at the Port of Liverpool, to replace out-dated hard-wired, ground-box connections. Marechal decontactors allow the port to improve electrical safety whilst integrating control and power in the same connector and minimising down-time and maintenance costs. With sealing to IP66/67, the Marechal decontactors provide a watertight and dust-tight connection, whilst the robust construction ensures an extended operational lifetime despite the heavy-duty operating environment and high levels of salt-water and spray.
The unique design of the Marechal DS2 plug and socket assembly includes safety features such as a quick-release button with an integral isolation switch, which makes it possible for the maintenance team to quickly and safely connect and disconnect power, even under load, and without the need for a qualified electrician. The LV electrical connection is watertight as soon as the Marechal plug is inserted into the socket and the socket-outlet is watertight when lid closed. Marechal DS decontactors are rated for currents up to 250A and are manufactured in metal casings, with silver-nickel butt contacts, enabling them to resist shocks up to IK09.
Marechal DS Plugs & Sockets Industrial Power Supply & Motor Connections (30A-...
Marechal DS Plugs & Sockets Industrial Power Supply & Motor Connections (30A-...Thorne & Derrick International
Marechal DS range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 30amps-250amps. Marechal DS range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes).
Marechal DS Power Supply and Motor Connection Plugs and Sockets
30amp-250amp current ratings for plugs and sockets
500v-1000v a.c. rated plugs and sockets
IP54/IP55 water and dust tight plug assemblies (IP66/IP67 available)
AC-22 / AC-23 load breaking capability
GRP casings, chemical and IK08 shock resistant
Metal casings, corrosion resistant, IK09 shock resistant
Resistant to temperature changes -40 to +60 Degrees Celsius
Equipped with silver-nickel butt contacts for lifetime reliability
Typical Marechal DS Industrial Plugs Applications - power supply to motor and pump connections, heavy industry, mines and quarries, ship to shore plug connections, gensets, power supply to production lines and manufacturing operations. Marechal DS plugs and sockets range of decontactors is supported by a full line of wall mounting sockets, inclined sockets, coupler sockets, wall mounting appliance inlets and inclined appliance inlets.
Marechal DS Plugs & Sockets Decontactors - The Range
Marechal DS1 Plugs - 30amp
Marechal DS3 Plugs - 50am
Marechal DS6 Plugs - 90amp
Marechal DS9 Plugs - 150amp
Marechal DS2 Plugs - 250amp
Marechal Electric pioneered the use of high performance, silver-nickel butt contacts in electrical plug and socket systems (decontactors), which are now available for applications from simple compact multi-pin to heavy duty 600A plug connections. Marechal technology is used across a range of demanding environments such as the food and drink, nuclear power, heavy industry, infrastructure and ATEX hazardous area sectors. Marechal decontactors are an effective alternative to both hard-wired equipment and pin/sleeve type contacts, the decontactor is a highly flexible method of connecting and disconnecting electrical equipment at the press of a latch – safely. Marechal Electric brought the decontactor, the high performance industrial plug connector with integral AC21 switch, to the electrical market.
Prysmian BICON 371 Aluminium Hook Cable Cleats
The document describes an aluminum hook cleat that is suitable for securing cables between 19-76mm in diameter. It has a two-piece, single fixing design that allows for double stacking and temporary open positioning. The cleat is manufactured from aluminum alloy and is intended for indoor or outdoor use in normal industrial environments between -60°C and +105°C. It should not be used for long vertical cable runs.
Recommended
Marechal DSN3 Plugs, Sockets (Decontactors) 32Amps - Marechal DSN3 Decontacto...
Marechal DSN3 Plugs, Sockets (Decontactors) 32Amps - Marechal DSN3 Decontacto...Thorne & Derrick International
This document provides information on DSN3 electrical connection systems including:
- Contact details for the manufacturer at the top
- Specifications for typical wall mounting sockets and plugs that have IP66/IP67 protection and can handle currents up to 32A
- Details on the load-break capability of their disconnectors that comply with relevant standards
- A table listing available inlet and socket-outlet part numbers for various voltages and configurations
- Information on optional boxes, sleeves, handles, adapters and accessories Marechal DSN6 Plugs, Sockets (Decontactors) 63Amps - Marechal DSN6 Decontacto...
Marechal DSN6 Plugs, Sockets (Decontactors) 63Amps - Marechal DSN6 Decontacto...Thorne & Derrick International
Marechal DSN range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 20amps-63amps. Marechal DSN range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes) :
*20amp-63amp current ratings *500v-1000v a.c.
*IP66/IP67 water and dust tight plug assemblies
*AC-22 / AC-23 load breaking capability
*GRP casings, chemical and IK08 shock resistant
*Resistant to temperature changes -40 to +60 Degrees Celsius
*Equipped with silver-nickel butt contacts for lifetime reliability
T&D UK also stock distribute the ATEX Certified range of Marechal Hazardous Area plugs and sockets (decontactors) for Zones 1, 2, 21 and 22 installation.
Marechal Plugs & Sockets : Press Release Belgian vegetable preparation company, Legumex, uses around 100,000m3 of water annually for the cleaning and preparation of fresh vegetables - this amount of water and 24/7 operation 365 days a year, means that their electrical plug and socket connections must be completely water-tight, robust and reliable. Legumex uses Marechal DSN1 Decontactor plugs and sockets on the permanent power supplies to the production line and in the maintenance workshop. Rated for currents of up to 20A, Marechal DSN1 Decontactors are sealed to IP66/67 making them completely watertight even for pressure-washing, when connected and disconnected. An integrated switch mechanism means that the maintenance team can immediately and safely disconnect or connect equipment without the need for a qualified electrician. This makes maintenance faster and significantly more cost-effective than the alternative of hard wired equipment. Marechal plugs and sockets are made from glass-reinforced polyester body, silver-nickel butt contacts and vibration-proof terminals - Marechal Decontactors are resistant to corrosion and shock, providing long-term reliability, even after thousands of connections and disconnections.Marechal DS3 GRP Plugs, Inlets & Sockets 50 Amps - Marechal DS Decontactor Fo...
Marechal DS3 GRP Plugs, Inlets & Sockets 50 Amps - Marechal DS Decontactor Fo...Thorne & Derrick International
Marechal DS3 50Amp Plug & Socket (Decontactors) for Low Voltage Industrial Power Supply and Motor Connections
Marechal DS range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 30amps-250amps. Marechal DS range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes) :
*30amp-250amp current ratings
*500v-1000v a.c.
*IP54/IP55 water and dust tight plug assemblies (IP66/IP67 available)
*AC-22 / AC-23 load breaking capability
*GRP casings, chemical and IK08 shock resistant
*Metal casings, corrosion resistant, IK09 shock resistant
*Resistant to temperature changes -40 to +60 Degrees Celsius
*Equipped with silver-nickel butt contacts for lifetime reliability
T&D UK also stock distribute the ATEX Certified range of Marechal Hazardous Area plugs and sockets (decontactors) for Zones 1, 2, 21 and 22 installation.
Marechal Electric pioneered the use of high performance, silver-nickel butt contacts in electrical plug and socket systems (decontactors), which are now available for applications from simple compact multi-pin to heavy duty 600A plug connections. Marechal technology is used across a range of demanding environments such as the food and drink, nuclear power, heavy industry, infrastructure and ATEX hazardous area sectors. Marechal decontactors are an effective alternative to both hard-wired equipment and pin/sleeve type contacts, the decontactor is a highly flexible method of connecting and disconnecting electrical equipment at the press of a latch – safely. Marechal Electric brought the decontactor, the high performance industrial plug connector with integral AC21 switch, to the electrical market.
CATU Portable Earthing & Short Circuiting
This document provides information on IEC short-circuiting and earthing systems for MV substations, including equipment for installation on permanent fixed points and bare conductors. It lists various earth clamps, connection sets, and accessories with their reference numbers, descriptions, ratings, and packaging details. Installation involves using earth clamps and connection sets with extra-flexible copper cables to bond fixed points and bare conductors to earth.
Marechal DS1 GRP Plugs, Inlets & Sockets 30 Amps - Marechal DS Decontactor Fo...
Marechal DS1 GRP Plugs, Inlets & Sockets 30 Amps - Marechal DS Decontactor Fo...Thorne & Derrick International
This document provides information on electrical connection devices and accessories from Thorne and Derrick, including:
- Wall mounting sockets and plugs rated for 30A at IP55 protection.
- Configurations for straight or angled handles, wall boxes, and sleeves.
- Options for auxiliary contacts, padlocking, E-stop buttons, and inlet caps.
- Industrial-domestic adapters and extension cables with IP44 plugs and IP55 sockets.
- Contact information for Thorne and Derrick is listed at the bottom.Marechal DS2 METAL Plugs, Inlets & Sockets 250 Amps - Marechal DS Decontactor...
Marechal DS2 METAL Plugs, Inlets & Sockets 250 Amps - Marechal DS Decontactor...Thorne & Derrick International
Marechal DS2 250Amp Plug & Socket (Decontactors) for Low Voltage Industrial Power Supply and Motor Connections
Marechal DS range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 30amps-250amps. Marechal DS range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes) :
*30amp-250amp current ratings
*500v-1000v a.c.
*IP54/IP55 water and dust tight plug assemblies (IP66/IP67 available)
*AC-22 / AC-23 load breaking capability
*GRP casings, chemical and IK08 shock resistant
*Metal casings, corrosion resistant, IK09 shock resistant
*Resistant to temperature changes -40 to +60 Degrees Celsius
*Equipped with silver-nickel butt contacts for lifetime reliability
T&D UK also stock distribute the ATEX Certified range of Marechal Hazardous Area plugs and sockets (decontactors) for Zones 1, 2, 21 and 22 installation.
• Decontactors replace out-dated hard-wired ground-box connections
• Up to 250A power and control signals in the same plug connector
• Watertight and dust-tight with IP66/67 sealing as standard
• Fast and safe disconnection without the need for a qualified electrician
• Reduces down-time and minimises maintenance time and cost
Marechal DS2 decontactors (plugs and sockets) have been fitted to quay-side cranes at the Port of Liverpool, to replace out-dated hard-wired, ground-box connections. Marechal decontactors allow the port to improve electrical safety whilst integrating control and power in the same connector and minimising down-time and maintenance costs. With sealing to IP66/67, the Marechal decontactors provide a watertight and dust-tight connection, whilst the robust construction ensures an extended operational lifetime despite the heavy-duty operating environment and high levels of salt-water and spray.
The unique design of the Marechal DS2 plug and socket assembly includes safety features such as a quick-release button with an integral isolation switch, which makes it possible for the maintenance team to quickly and safely connect and disconnect power, even under load, and without the need for a qualified electrician. The LV electrical connection is watertight as soon as the Marechal plug is inserted into the socket and the socket-outlet is watertight when lid closed. Marechal DS decontactors are rated for currents up to 250A and are manufactured in metal casings, with silver-nickel butt contacts, enabling them to resist shocks up to IK09.
Marechal DS Plugs & Sockets Industrial Power Supply & Motor Connections (30A-...
Marechal DS Plugs & Sockets Industrial Power Supply & Motor Connections (30A-...Thorne & Derrick International
Marechal DS range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 30amps-250amps. Marechal DS range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes).
Marechal DS Power Supply and Motor Connection Plugs and Sockets
30amp-250amp current ratings for plugs and sockets
500v-1000v a.c. rated plugs and sockets
IP54/IP55 water and dust tight plug assemblies (IP66/IP67 available)
AC-22 / AC-23 load breaking capability
GRP casings, chemical and IK08 shock resistant
Metal casings, corrosion resistant, IK09 shock resistant
Resistant to temperature changes -40 to +60 Degrees Celsius
Equipped with silver-nickel butt contacts for lifetime reliability
Typical Marechal DS Industrial Plugs Applications - power supply to motor and pump connections, heavy industry, mines and quarries, ship to shore plug connections, gensets, power supply to production lines and manufacturing operations. Marechal DS plugs and sockets range of decontactors is supported by a full line of wall mounting sockets, inclined sockets, coupler sockets, wall mounting appliance inlets and inclined appliance inlets.
Marechal DS Plugs & Sockets Decontactors - The Range
Marechal DS1 Plugs - 30amp
Marechal DS3 Plugs - 50am
Marechal DS6 Plugs - 90amp
Marechal DS9 Plugs - 150amp
Marechal DS2 Plugs - 250amp
Marechal Electric pioneered the use of high performance, silver-nickel butt contacts in electrical plug and socket systems (decontactors), which are now available for applications from simple compact multi-pin to heavy duty 600A plug connections. Marechal technology is used across a range of demanding environments such as the food and drink, nuclear power, heavy industry, infrastructure and ATEX hazardous area sectors. Marechal decontactors are an effective alternative to both hard-wired equipment and pin/sleeve type contacts, the decontactor is a highly flexible method of connecting and disconnecting electrical equipment at the press of a latch – safely. Marechal Electric brought the decontactor, the high performance industrial plug connector with integral AC21 switch, to the electrical market.
Prysmian BICON 371 Aluminium Hook Cable Cleats
The document describes an aluminum hook cleat that is suitable for securing cables between 19-76mm in diameter. It has a two-piece, single fixing design that allows for double stacking and temporary open positioning. The cleat is manufactured from aluminum alloy and is intended for indoor or outdoor use in normal industrial environments between -60°C and +105°C. It should not be used for long vertical cable runs.
CATU Earth Clamps for Network Rail Overhead Catenary Lines
This document provides product references and specifications for clamp dispenser heads and accessories. It lists various clamp dispenser head models for different numbers of clamps and whether they include a pigtail hook. Earth clamps, rods, and spools are also referenced. Electrical ratings and sizing information is given for earth clamps and cable joints. Dimensions, material composition, and other technical characteristics are provided.
Marechal DSN Plugs & Sockets Industrial Power Supply & Motor Connections (20-...
Marechal DSN Plugs & Sockets Industrial Power Supply & Motor Connections (20-...Thorne & Derrick International
Marechal DSN range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 20amps-63amps. Marechal DSN range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes) :
*20amp-63amp current ratings for plug and socket assemblies
*500v-1000v a.c.
*IP66/IP67 water and dust tight plug assemblies
*AC-22 / AC-23 load breaking capability
*GRP casings, chemical and IK08 shock resistant
*Plugs resistant to temperature changes -40 to +60 Degrees Celsius
*Equipped with silver-nickel butt contacts for lifetime reliability
Typical Marechal DSN Industrial Plugs Applications - power supply to motor and pump connections, food and drinks industry, heavy industry, water utilities and treatment, mines and quarries, ship to shore plug connections, gensets, power supply to production lines and manufacturing operations. Marechal DSN plugs and sockets range of decontactors is supported by a full line of wall mounting sockets, inclined sockets, coupler sockets, wall mounting appliance inlets and inclined appliance inlets. Furse Earth Bars - Standard, Single & Twin Disconnection Copper Earth Bars
Furse Earth Bars - Standard, Single & Twin Disconnection Copper Earth BarsThorne & Derrick International
This document provides information on earth bars and accessories produced by Furse. It describes standard earth bar designs available in various lengths and materials, as well as special custom earth bar designs. Features of the standard earth bars include plastic channel bases, pre-drilled fixing holes, and disconnecting links. The document also lists specifications and part numbers for standard earth bars, insulators, and accessories like swan-neck links and disconnecting links. Special custom earth bars can be designed and manufactured according to specific customer requirements.Marechal DX ATEX Plugs & Sockets - Marechal DX Metal Decontactor For Hazardou...
Marechal DX ATEX Plugs & Sockets - Marechal DX Metal Decontactor For Hazardou...Thorne & Derrick International
Marechal DX decontactors are designed for hazardous areas with 'de' protection mode. The Marechal DX plugs & sockets comply with the ATEX 94/9/CE Directive.
Marechal ATEX DX plugs and sockets can be used in zones 1 & 2 (gas) and zones 21 & 22 (dust). The DX decontactors are also certified according to IECEx standards.
Marechal DX ATEX Plugs & Sockets Mechanical Specifications:
Marechal IP65 plug and socket-outlet with 'de' protection mode for hazardous areas (ATEX) with integral switching device, comply with BECMA international standard.
Marechal DX ATEX Plugs & Sockets features:
Ex II2 G D Ex DE IIC
IP65 Water & dust tight
Integrated load break switch
Locking in On/Off positions by keying axis
Marechal DX ATEX Plugs & Sockets Technical Features:
Rated Current (In): 20A - 200A
Umax: 750V
Keying Positions: 12
Ambient Temperature: -25°C to +60°C
ATEX Zones: Zones 1 & 2 (gas) Zones 21 & 22 (dusts) - for all DIXEllis Patents Aluminium Two Hole Cable Clamps - Aluminium Cable Cleats
Ellis Patents Aluminium Two Hole Cable Clamps - Aluminium Cable CleatsThorne & Derrick International
Cast aluminium alloy cable cleats are designed for securing cables in industrial and outdoor environments. The cleats are manufactured from LM6 aluminium alloy and can be epoxy coated for harsh conditions like sea air. The document provides a selection table and specifications for 12 different two-hole cable clamp models, including their cable capacity range, dimensions, fixing points, and part numbers. It also lists the results of testing the cleats according to the European standard for cable cleats.Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes Thorne & Derrick International
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes
Hellermann Tyton Helashrink heatshrink boots and moulded shapes in conjunction with specialist heatshrink tubing make it easy to fabricate complete jacketed wire and cable harnessing and interconnection systems.
Hellermann Tyton Helashrink heatshrink boots (straight and right-angled) and moulded shapes are available for the complete range of electrical and electronic harnessing applications. Heat shrink boots and shapes can be sealed with special adhesives and encapsulants to ensure the proper degree of mechanical support, strain relief and environmental protection. Encapsulating the complete harnessing and interconnection system to the desired configuration is easily and neatly accomplished with minimum weight and bulk using Hellermann Tyton Helashrink heat shrink components.
Hellermann Tyton Heat Shrink Moulded Shapes & Boots - Overview....
Hellermann Tyton Helashrink heat shrinkable shapes, end caps and cable break-out boots with and without inner adhesive. Hellermannn Tyton heat shrink backshells, 2-way outlet shapes, 3-way outlet shapes, 4-way outlet shapes, 5-way outlet shapes up to 6-way outlet shapes. Hellermann Tyton heat shrink right angle boot 90°, 45°C angle, T-shapes, Y-outlet, VG-style shapes. Heat shrink cable end caps for low voltage applications, two components epoxy adhesive and hot melt tape.
Prysmian Aluminium Hook Cable Cleats - 371 Series Cable Cleats
The document summarizes an aluminum hook cleat for securing cables. It has the following key details:
- Suitable for cable diameters between 19-76mm
- Manufactured from aluminum alloy and designed for indoor/outdoor industrial use between -60°C to +105°C
- Two-piece, single fixing design that can be double stacked or installed in a temporary open position for single person work
- Meets European safety standards for impact resistance and load limits
BAND-IT Sign Fix Clips & Sign Channel
This document provides information on cable joints, terminations, glands, cleats, feeder pillars, fuse links, and other electrical equipment from Thorne and Derrick UK. It also includes advertisements and product information for BAND-IT brand band clamps, ties, mounting hardware, and identification systems. BAND-IT offers a variety of clamping solutions for numerous industrial, construction, agricultural, and marine applications.
Marechal DSN1 Plugs, Sockets (Decontactors) 20Amps - Marechal DSN1 Decontacto...
Marechal DSN1 Plugs, Sockets (Decontactors) 20Amps - Marechal DSN1 Decontacto...Thorne & Derrick International
Marechal DSN range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 20amps-63amps. Marechal DSN range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes) :
*20amp-63amp current ratings
*500v-1000v a.c.
*IP66/IP67 water and dust tight plug assemblies
*AC-22 / AC-23 load breaking capability
*GRP casings, chemical and IK08 shock resistant
*Resistant to temperature changes -40 to +60 Degrees Celsius
*Equipped with silver-nickel butt contacts for lifetime reliability
T&D UK also stock distribute the ATEX Certified range of Marechal Hazardous Area plugs and sockets (decontactors) for Zones 1, 2, 21 and 22 installation.
Marechal Plugs & Sockets : Press Release
Belgian vegetable preparation company, Legumex, uses around 100,000m3 of water annually for the cleaning and preparation of fresh vegetables - this amount of water and 24/7 operation 365 days a year, means that their electrical plug and socket connections must be completely water-tight, robust and reliable. Legumex uses Marechal DSN1 Decontactor plugs and sockets on the permanent power supplies to the production line and in the maintenance workshop. Rated for currents of up to 20A, Marechal DSN1 Decontactors are sealed to IP66/67 making them completely watertight even for pressure-washing, when connected and disconnected. An integrated switch mechanism means that the maintenance team can immediately and safely disconnect or connect equipment without the need for a qualified electrician. This makes maintenance faster and significantly more cost-effective than the alternative of hard wired equipment. Marechal plugs and sockets are made from glass-reinforced polyester body, silver-nickel butt contacts and vibration-proof terminals - Marechal Decontactors are resistant to corrosion and shock, providing long-term reliability, even after thousands of connections and disconnections.
Elastimold Loadbreak Elbows 200Amp - Elastimold 166LR
The 166LR Elbow Connector is a 15kV, 200 Amp loadbreak connector for connecting and operating 15kV distribution apparatus. It has provisions for hotstick operation, a visible disconnect, and an integral capacitive voltage test point. It is rated for 15kV voltage class, 34kV AC withstand, and 200A continuous loadbreak. The 166LR allows connection of cables with insulation diameters from 0.575" to 1.220" with only four elbow sizes.
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...Thorne & Derrick International
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (Supply)
CMP A324 Zen insulated aluminium cable glands are suitable for the cable termination of all low voltage and high voltage aluminium wire armoured (AWA) cables, indoor and outdoor with IP66 seal - CMP A324 Zen insulated aluminium cable glands feature CMP Cast Integral Earth Lug (CIEL) allowing the zoning of earth connections for earthed neutral systems.
CMP Zen Insulated Cable Glands - High Voltage Cable Termination with Brass or Aluminium Cable Glands
In the power generation industry unless special measures are taken to both segregate LV-HV cables in accordance with wiring regulations, and also isolate the metallic cable armour from running in continuous contact throughout the whole of the earthing system, interference or electrical noise would spread throughout the plant. CMP Zen Insulated cable gland system allows cables to be earthed at one end only - single point earthing - and insulated at the field end. Insulated Zen cable glands are available to ensure that no contact is made between the earth circuit carried through the cable armour and the low-high voltage electrical enclosure which the cable enters. CMP Zen Insulated cable glands permit electrical design engineers to implement safe earthing systems to deal with :
*Cross Talk Noise Reduction
*Electrical Separation of Main Earths
*Earth Fault Segregation
*Fault Current Reduction with Series Cable Resistance
*Electrical Noise Reduction in Instrument Cables
*Circulating Current Production in Single or 3 Core High Voltage Cables
CMP Zen Insulated Cable Glands - CMP A324 & A348
CMP Zen Insulated cable glands are suitable for use with all aluminium wire armoured (AWA) cables providing an IP66 environmental seal on the cable outer sheath. CMP A324 Zen glands feature Cast Integral Earth Lug (CIEL) suitable for high voltage power cable systems where a high level of protection against fault currents is required - CMP's unique cable glanding concept effectively insulates the gland and cable armour from the electrical equipment eliminating circulating currents. CMP Zen A324 cable gland is usually installed at the supply end of the cable and Zen A348 cable gland at the load end - suitable for 3.3kV, 6.6kV, 11kV and 33kV single core AWA high voltage power cable glanding.
Kraus & naimer main switches and maintenance switches kn500 gb1214
Catalog Kraus Naimer, Catalog,
Catalog Thiết Bị Điện Kraus Naimer, Catalog Thiết Bị Điện,
Catalog Biến Tần Kraus Naimer, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Kraus Naimer tại https://dienhathe.com
Xem thêm các Catalog khác của Kraus Naimer tại https://dienhathe.info
Để nhận báo giá sản phẩm Kraus Naimer vui lòng gọi: 0907.764.966
Kraus & naimer main switches and maintenance switches kn500 gb1214-dienha...
Blue Line switches are designed for electrical switchgear based on over 100 years of experience. They are protected by patents worldwide and meet international standards. Blue Line switches are known for their quality and are supported by a global sales and service network. The document provides information on main switches, maintenance switches, switch disconnectors, and technical specifications.
Nexans Euromold 900 Series Interface F Asymmetrical Cable Connectors HV
Nexans Euromold 900 Series Interface F Asymmetrical Cable Connectors HVThorne & Derrick International
900 Series Interface F Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface F bushings on switchgear and transformers up to 42kV. Nexans 944TB Tee Connectors provide high voltage cable terminations using separable tee shape connectors :
Nexans 944TB/G - 12kV 2500Amp 70-80sqmm Conductors
Nexans K944TB/G - 24kV 2500Amp 16-800sqmm Conductors
Nexans M944TB/G - 36kV 2500Amp 35-800sqmm Conductors
Nexans P944TB/G - 42kV 1250Amp 50-800sqmm Conductors
Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...
Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...Thorne & Derrick International
Nexans Euromold Separable Elbow Connectors 158LR are designed to terminate and connect high voltage polymeric cables to electrical equipment including motors, switchgear and transformers with Type A 250Amp interface as described by CENELEC EN50180 and 50181.
Nexans Euromold Elbow Connectors type 158LR meet the requirements of CENELEC HD 629.1.
Nexans Euromold separable elbow connectors are designed to terminate high voltage polymeric (XLPE EPR) screened (copper wire or copper tape) cables to CENELEC Interface Type A (250amp) bushings with 7.9mm plug-in pins, 11kV-24kV.
Nexans Euromold 158LR/G and Nexans Euromold 158LR seperable connectors are approved for terminating 11kV/12kV polymeric (XLPE EPR) cables into gas insulated (SF6) switchgear, including ABB Safe Ring Ring Main Units (RMU's) and ABB Safe Plus Switchgear. Euromold 158LR/G connectors include earthing leads.
HV Elbows, Nexans Euromold Connectors HV - 158LR Connectors, 12kV 250Amp - 70...
HV Elbows, Nexans Euromold Connectors HV - 158LR Connectors, 12kV 250Amp - 70...Thorne & Derrick International
This document provides information on cable joints, terminations, and related equipment for voltages up to 24kV. It describes an Interface A elbow connector for connecting polymeric insulated cable to equipment. The connector has a conductive EPDM jacket for safety and is tested to withstand voltages and partial discharge. Kit contents and ordering instructions are provided.Cold Shrink Splice Kit 3M 8427-6
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Splice Kit 3M 8427-6
Cold Shrink Tubes 3M
3M 8427-6 Cold Shrink Tubes 17.5mm-33.0mm Diameters - 152mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8427-6 - Typical Applications
Insulation and sealing of inline cable splices and electrical connectors
Primary electrical insulation up to 1kV for cold shrink cable repairs
Conduit and cable breakout sealing - moisture barrier
Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Cold Shrink Splice Kit 3M 8427-12
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Splice Kit 3M 8427-12
Cold Shrink Tubes 3M
3M 8427-12 Cold Shrink Tubes 17.5mm-33.0mm Diameters - 305mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8427-12 - Typical Applications
Insulation and sealing of inline cable splices and electrical connectors
Primary electrical insulation up to 1kV for cold shrink cable repairs
Conduit and cable breakout sealing - moisture barrier
Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Cold Shrink Splice Kit 3M 8428-12
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Splice Kit 3M 8428-12
Cold Shrink Tubes 3M
3M 8428-12 Cold Shrink Tubes 24.0mm-49.3mm Diameters - 305mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8428-12 - Typical Applications
Insulation and sealing of inline cable splices and electrical connectors
Primary electrical insulation up to 1kV for cold shrink cable repairs
Conduit and cable breakout sealing - moisture barrier
Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Cold Shrink Splice Kit 3M 8429-9
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Tubes 3M
3M 8429-9 Cold Shrink Tubes 32.2mm-67.8mm Diameters - 229mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8429-9 - Typical Applications
* Insulation and sealing of inline cable splices and electrical connectors
* Primary electrical insulation up to 1kV for cold shrink cable repairs
* Conduit and cable breakout sealing - moisture barrier
* Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Cold Shrink Splice Kit 3M 8428-6
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Tubes 3M
3M 8428-6 Cold Shrink Tubes 24.0mm-49.3mm Diameters - 152mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8428-6 - Typical Applications
Insulation and sealing of inline cable splices and electrical connectors
Primary electrical insulation up to 1kV for cold shrink cable repairs
Conduit and cable breakout sealing - moisture barrier
Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Cold shrink splice kit 3 m 8428 18
3M produces Cold Shrink EPDM Tubes called PST Connector Insulators that are used to insulate electrical connections. The tubes are made of EPDM rubber and come in various sizes to accommodate different cable diameters. They are pre-stretched and shrink to form a waterproof seal around connections when a removable core is withdrawn. PST tubes provide insulation, protection from water and chemicals, and can be used for both indoor and outdoor applications including direct burial.
More Related Content
What's hot
CATU Earth Clamps for Network Rail Overhead Catenary Lines
This document provides product references and specifications for clamp dispenser heads and accessories. It lists various clamp dispenser head models for different numbers of clamps and whether they include a pigtail hook. Earth clamps, rods, and spools are also referenced. Electrical ratings and sizing information is given for earth clamps and cable joints. Dimensions, material composition, and other technical characteristics are provided.
Marechal DSN Plugs & Sockets Industrial Power Supply & Motor Connections (20-...
Marechal DSN Plugs & Sockets Industrial Power Supply & Motor Connections (20-...Thorne & Derrick International
Marechal DSN range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 20amps-63amps. Marechal DSN range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes) :
*20amp-63amp current ratings for plug and socket assemblies
*500v-1000v a.c.
*IP66/IP67 water and dust tight plug assemblies
*AC-22 / AC-23 load breaking capability
*GRP casings, chemical and IK08 shock resistant
*Plugs resistant to temperature changes -40 to +60 Degrees Celsius
*Equipped with silver-nickel butt contacts for lifetime reliability
Typical Marechal DSN Industrial Plugs Applications - power supply to motor and pump connections, food and drinks industry, heavy industry, water utilities and treatment, mines and quarries, ship to shore plug connections, gensets, power supply to production lines and manufacturing operations. Marechal DSN plugs and sockets range of decontactors is supported by a full line of wall mounting sockets, inclined sockets, coupler sockets, wall mounting appliance inlets and inclined appliance inlets. Furse Earth Bars - Standard, Single & Twin Disconnection Copper Earth Bars
Furse Earth Bars - Standard, Single & Twin Disconnection Copper Earth BarsThorne & Derrick International
This document provides information on earth bars and accessories produced by Furse. It describes standard earth bar designs available in various lengths and materials, as well as special custom earth bar designs. Features of the standard earth bars include plastic channel bases, pre-drilled fixing holes, and disconnecting links. The document also lists specifications and part numbers for standard earth bars, insulators, and accessories like swan-neck links and disconnecting links. Special custom earth bars can be designed and manufactured according to specific customer requirements.Marechal DX ATEX Plugs & Sockets - Marechal DX Metal Decontactor For Hazardou...
Marechal DX ATEX Plugs & Sockets - Marechal DX Metal Decontactor For Hazardou...Thorne & Derrick International
Marechal DX decontactors are designed for hazardous areas with 'de' protection mode. The Marechal DX plugs & sockets comply with the ATEX 94/9/CE Directive.
Marechal ATEX DX plugs and sockets can be used in zones 1 & 2 (gas) and zones 21 & 22 (dust). The DX decontactors are also certified according to IECEx standards.
Marechal DX ATEX Plugs & Sockets Mechanical Specifications:
Marechal IP65 plug and socket-outlet with 'de' protection mode for hazardous areas (ATEX) with integral switching device, comply with BECMA international standard.
Marechal DX ATEX Plugs & Sockets features:
Ex II2 G D Ex DE IIC
IP65 Water & dust tight
Integrated load break switch
Locking in On/Off positions by keying axis
Marechal DX ATEX Plugs & Sockets Technical Features:
Rated Current (In): 20A - 200A
Umax: 750V
Keying Positions: 12
Ambient Temperature: -25°C to +60°C
ATEX Zones: Zones 1 & 2 (gas) Zones 21 & 22 (dusts) - for all DIXEllis Patents Aluminium Two Hole Cable Clamps - Aluminium Cable Cleats
Ellis Patents Aluminium Two Hole Cable Clamps - Aluminium Cable CleatsThorne & Derrick International
Cast aluminium alloy cable cleats are designed for securing cables in industrial and outdoor environments. The cleats are manufactured from LM6 aluminium alloy and can be epoxy coated for harsh conditions like sea air. The document provides a selection table and specifications for 12 different two-hole cable clamp models, including their cable capacity range, dimensions, fixing points, and part numbers. It also lists the results of testing the cleats according to the European standard for cable cleats.Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes Thorne & Derrick International
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes
Hellermann Tyton Helashrink heatshrink boots and moulded shapes in conjunction with specialist heatshrink tubing make it easy to fabricate complete jacketed wire and cable harnessing and interconnection systems.
Hellermann Tyton Helashrink heatshrink boots (straight and right-angled) and moulded shapes are available for the complete range of electrical and electronic harnessing applications. Heat shrink boots and shapes can be sealed with special adhesives and encapsulants to ensure the proper degree of mechanical support, strain relief and environmental protection. Encapsulating the complete harnessing and interconnection system to the desired configuration is easily and neatly accomplished with minimum weight and bulk using Hellermann Tyton Helashrink heat shrink components.
Hellermann Tyton Heat Shrink Moulded Shapes & Boots - Overview....
Hellermann Tyton Helashrink heat shrinkable shapes, end caps and cable break-out boots with and without inner adhesive. Hellermannn Tyton heat shrink backshells, 2-way outlet shapes, 3-way outlet shapes, 4-way outlet shapes, 5-way outlet shapes up to 6-way outlet shapes. Hellermann Tyton heat shrink right angle boot 90°, 45°C angle, T-shapes, Y-outlet, VG-style shapes. Heat shrink cable end caps for low voltage applications, two components epoxy adhesive and hot melt tape.
Prysmian Aluminium Hook Cable Cleats - 371 Series Cable Cleats
The document summarizes an aluminum hook cleat for securing cables. It has the following key details:
- Suitable for cable diameters between 19-76mm
- Manufactured from aluminum alloy and designed for indoor/outdoor industrial use between -60°C to +105°C
- Two-piece, single fixing design that can be double stacked or installed in a temporary open position for single person work
- Meets European safety standards for impact resistance and load limits
BAND-IT Sign Fix Clips & Sign Channel
This document provides information on cable joints, terminations, glands, cleats, feeder pillars, fuse links, and other electrical equipment from Thorne and Derrick UK. It also includes advertisements and product information for BAND-IT brand band clamps, ties, mounting hardware, and identification systems. BAND-IT offers a variety of clamping solutions for numerous industrial, construction, agricultural, and marine applications.
Marechal DSN1 Plugs, Sockets (Decontactors) 20Amps - Marechal DSN1 Decontacto...
Marechal DSN1 Plugs, Sockets (Decontactors) 20Amps - Marechal DSN1 Decontacto...Thorne & Derrick International
Marechal DSN range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 20amps-63amps. Marechal DSN range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes) :
*20amp-63amp current ratings
*500v-1000v a.c.
*IP66/IP67 water and dust tight plug assemblies
*AC-22 / AC-23 load breaking capability
*GRP casings, chemical and IK08 shock resistant
*Resistant to temperature changes -40 to +60 Degrees Celsius
*Equipped with silver-nickel butt contacts for lifetime reliability
T&D UK also stock distribute the ATEX Certified range of Marechal Hazardous Area plugs and sockets (decontactors) for Zones 1, 2, 21 and 22 installation.
Marechal Plugs & Sockets : Press Release
Belgian vegetable preparation company, Legumex, uses around 100,000m3 of water annually for the cleaning and preparation of fresh vegetables - this amount of water and 24/7 operation 365 days a year, means that their electrical plug and socket connections must be completely water-tight, robust and reliable. Legumex uses Marechal DSN1 Decontactor plugs and sockets on the permanent power supplies to the production line and in the maintenance workshop. Rated for currents of up to 20A, Marechal DSN1 Decontactors are sealed to IP66/67 making them completely watertight even for pressure-washing, when connected and disconnected. An integrated switch mechanism means that the maintenance team can immediately and safely disconnect or connect equipment without the need for a qualified electrician. This makes maintenance faster and significantly more cost-effective than the alternative of hard wired equipment. Marechal plugs and sockets are made from glass-reinforced polyester body, silver-nickel butt contacts and vibration-proof terminals - Marechal Decontactors are resistant to corrosion and shock, providing long-term reliability, even after thousands of connections and disconnections.
Elastimold Loadbreak Elbows 200Amp - Elastimold 166LR
The 166LR Elbow Connector is a 15kV, 200 Amp loadbreak connector for connecting and operating 15kV distribution apparatus. It has provisions for hotstick operation, a visible disconnect, and an integral capacitive voltage test point. It is rated for 15kV voltage class, 34kV AC withstand, and 200A continuous loadbreak. The 166LR allows connection of cables with insulation diameters from 0.575" to 1.220" with only four elbow sizes.
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...Thorne & Derrick International
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (Supply)
CMP A324 Zen insulated aluminium cable glands are suitable for the cable termination of all low voltage and high voltage aluminium wire armoured (AWA) cables, indoor and outdoor with IP66 seal - CMP A324 Zen insulated aluminium cable glands feature CMP Cast Integral Earth Lug (CIEL) allowing the zoning of earth connections for earthed neutral systems.
CMP Zen Insulated Cable Glands - High Voltage Cable Termination with Brass or Aluminium Cable Glands
In the power generation industry unless special measures are taken to both segregate LV-HV cables in accordance with wiring regulations, and also isolate the metallic cable armour from running in continuous contact throughout the whole of the earthing system, interference or electrical noise would spread throughout the plant. CMP Zen Insulated cable gland system allows cables to be earthed at one end only - single point earthing - and insulated at the field end. Insulated Zen cable glands are available to ensure that no contact is made between the earth circuit carried through the cable armour and the low-high voltage electrical enclosure which the cable enters. CMP Zen Insulated cable glands permit electrical design engineers to implement safe earthing systems to deal with :
*Cross Talk Noise Reduction
*Electrical Separation of Main Earths
*Earth Fault Segregation
*Fault Current Reduction with Series Cable Resistance
*Electrical Noise Reduction in Instrument Cables
*Circulating Current Production in Single or 3 Core High Voltage Cables
CMP Zen Insulated Cable Glands - CMP A324 & A348
CMP Zen Insulated cable glands are suitable for use with all aluminium wire armoured (AWA) cables providing an IP66 environmental seal on the cable outer sheath. CMP A324 Zen glands feature Cast Integral Earth Lug (CIEL) suitable for high voltage power cable systems where a high level of protection against fault currents is required - CMP's unique cable glanding concept effectively insulates the gland and cable armour from the electrical equipment eliminating circulating currents. CMP Zen A324 cable gland is usually installed at the supply end of the cable and Zen A348 cable gland at the load end - suitable for 3.3kV, 6.6kV, 11kV and 33kV single core AWA high voltage power cable glanding.
What's hot (11)
CATU Earth Clamps for Network Rail Overhead Catenary Lines
CATU Earth Clamps for Network Rail Overhead Catenary Lines
Marechal DSN Plugs & Sockets Industrial Power Supply & Motor Connections (20-...
Marechal DSN Plugs & Sockets Industrial Power Supply & Motor Connections (20-...
Furse Earth Bars - Standard, Single & Twin Disconnection Copper Earth Bars
Furse Earth Bars - Standard, Single & Twin Disconnection Copper Earth Bars
Marechal DX ATEX Plugs & Sockets - Marechal DX Metal Decontactor For Hazardou...
Marechal DX ATEX Plugs & Sockets - Marechal DX Metal Decontactor For Hazardou...
Ellis Patents Aluminium Two Hole Cable Clamps - Aluminium Cable Cleats
Ellis Patents Aluminium Two Hole Cable Clamps - Aluminium Cable Cleats
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes
Prysmian Aluminium Hook Cable Cleats - 371 Series Cable Cleats
Prysmian Aluminium Hook Cable Cleats - 371 Series Cable Cleats
Marechal DSN1 Plugs, Sockets (Decontactors) 20Amps - Marechal DSN1 Decontacto...
Marechal DSN1 Plugs, Sockets (Decontactors) 20Amps - Marechal DSN1 Decontacto...
Elastimold Loadbreak Elbows 200Amp - Elastimold 166LR
Elastimold Loadbreak Elbows 200Amp - Elastimold 166LR
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...
Similar to Gel Joints DSG Canusa CGEL 1000
Kraus & naimer main switches and maintenance switches kn500 gb1214
Catalog Kraus Naimer, Catalog,
Catalog Thiết Bị Điện Kraus Naimer, Catalog Thiết Bị Điện,
Catalog Biến Tần Kraus Naimer, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Kraus Naimer tại https://dienhathe.com
Xem thêm các Catalog khác của Kraus Naimer tại https://dienhathe.info
Để nhận báo giá sản phẩm Kraus Naimer vui lòng gọi: 0907.764.966
Kraus & naimer main switches and maintenance switches kn500 gb1214-dienha...
Blue Line switches are designed for electrical switchgear based on over 100 years of experience. They are protected by patents worldwide and meet international standards. Blue Line switches are known for their quality and are supported by a global sales and service network. The document provides information on main switches, maintenance switches, switch disconnectors, and technical specifications.
Nexans Euromold 900 Series Interface F Asymmetrical Cable Connectors HV
Nexans Euromold 900 Series Interface F Asymmetrical Cable Connectors HVThorne & Derrick International
900 Series Interface F Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface F bushings on switchgear and transformers up to 42kV. Nexans 944TB Tee Connectors provide high voltage cable terminations using separable tee shape connectors :
Nexans 944TB/G - 12kV 2500Amp 70-80sqmm Conductors
Nexans K944TB/G - 24kV 2500Amp 16-800sqmm Conductors
Nexans M944TB/G - 36kV 2500Amp 35-800sqmm Conductors
Nexans P944TB/G - 42kV 1250Amp 50-800sqmm Conductors
Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...
Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...Thorne & Derrick International
Nexans Euromold Separable Elbow Connectors 158LR are designed to terminate and connect high voltage polymeric cables to electrical equipment including motors, switchgear and transformers with Type A 250Amp interface as described by CENELEC EN50180 and 50181.
Nexans Euromold Elbow Connectors type 158LR meet the requirements of CENELEC HD 629.1.
Nexans Euromold separable elbow connectors are designed to terminate high voltage polymeric (XLPE EPR) screened (copper wire or copper tape) cables to CENELEC Interface Type A (250amp) bushings with 7.9mm plug-in pins, 11kV-24kV.
Nexans Euromold 158LR/G and Nexans Euromold 158LR seperable connectors are approved for terminating 11kV/12kV polymeric (XLPE EPR) cables into gas insulated (SF6) switchgear, including ABB Safe Ring Ring Main Units (RMU's) and ABB Safe Plus Switchgear. Euromold 158LR/G connectors include earthing leads.
HV Elbows, Nexans Euromold Connectors HV - 158LR Connectors, 12kV 250Amp - 70...
HV Elbows, Nexans Euromold Connectors HV - 158LR Connectors, 12kV 250Amp - 70...Thorne & Derrick International
This document provides information on cable joints, terminations, and related equipment for voltages up to 24kV. It describes an Interface A elbow connector for connecting polymeric insulated cable to equipment. The connector has a conductive EPDM jacket for safety and is tested to withstand voltages and partial discharge. Kit contents and ordering instructions are provided.Cold Shrink Splice Kit 3M 8427-6
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Splice Kit 3M 8427-6
Cold Shrink Tubes 3M
3M 8427-6 Cold Shrink Tubes 17.5mm-33.0mm Diameters - 152mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8427-6 - Typical Applications
Insulation and sealing of inline cable splices and electrical connectors
Primary electrical insulation up to 1kV for cold shrink cable repairs
Conduit and cable breakout sealing - moisture barrier
Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Cold Shrink Splice Kit 3M 8427-12
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Splice Kit 3M 8427-12
Cold Shrink Tubes 3M
3M 8427-12 Cold Shrink Tubes 17.5mm-33.0mm Diameters - 305mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8427-12 - Typical Applications
Insulation and sealing of inline cable splices and electrical connectors
Primary electrical insulation up to 1kV for cold shrink cable repairs
Conduit and cable breakout sealing - moisture barrier
Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Cold Shrink Splice Kit 3M 8428-12
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Splice Kit 3M 8428-12
Cold Shrink Tubes 3M
3M 8428-12 Cold Shrink Tubes 24.0mm-49.3mm Diameters - 305mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8428-12 - Typical Applications
Insulation and sealing of inline cable splices and electrical connectors
Primary electrical insulation up to 1kV for cold shrink cable repairs
Conduit and cable breakout sealing - moisture barrier
Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Cold Shrink Splice Kit 3M 8429-9
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Tubes 3M
3M 8429-9 Cold Shrink Tubes 32.2mm-67.8mm Diameters - 229mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8429-9 - Typical Applications
* Insulation and sealing of inline cable splices and electrical connectors
* Primary electrical insulation up to 1kV for cold shrink cable repairs
* Conduit and cable breakout sealing - moisture barrier
* Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Cold Shrink Splice Kit 3M 8428-6
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Tubes 3M
3M 8428-6 Cold Shrink Tubes 24.0mm-49.3mm Diameters - 152mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8428-6 - Typical Applications
Insulation and sealing of inline cable splices and electrical connectors
Primary electrical insulation up to 1kV for cold shrink cable repairs
Conduit and cable breakout sealing - moisture barrier
Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Cold shrink splice kit 3 m 8428 18
3M produces Cold Shrink EPDM Tubes called PST Connector Insulators that are used to insulate electrical connections. The tubes are made of EPDM rubber and come in various sizes to accommodate different cable diameters. They are pre-stretched and shrink to form a waterproof seal around connections when a removable core is withdrawn. PST tubes provide insulation, protection from water and chemicals, and can be used for both indoor and outdoor applications including direct burial.
Cold Shrink Splice Kit 3M 8427-16
3M produces Cold Shrink EPDM Tubes called PST Connector Insulators that are used to insulate electrical connections. The tubes are made of EPDM rubber and come in various sizes to accommodate different cable diameters. They are pre-stretched and shrink to form a waterproof seal around connections when a removable core is pulled out. PST tubes provide insulation for cable splices and connections rated up to 1000 volts both indoors and outdoors. They can be directly buried, submerged, or used overhead and install without heat or flame simply using hands.
Cold Shrink Splice Kit 3M 8429-6
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Tubes 3M
3M 8429-6 Cold Shrink Tubes 32.2mm-67.8mm Diameters - 152mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8429-6 - Typical Applications
* Insulation and sealing of inline cable splices and electrical connectors
* Primary electrical insulation up to 1kV for cold shrink cable repairs
* Conduit and cable breakout sealing - moisture barrier
* Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Cold Shrink Splice Kit 3M 8429-12
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Splice Kit 3M 8429-12
Cold Shrink Tubes 3M
3M 8429-12 Cold Shrink Tubes 32.2mm-67.8mm Diameters - 305mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8429-12 - Typical Applications
Insulation and sealing of inline cable splices and electrical connectors
Primary electrical insulation up to 1kV for cold shrink cable repairs
Conduit and cable breakout sealing - moisture barrier
Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Cold Shrink Splice Kit 3M 8429-18
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Splice Kit 3M 8429-18
Cold Shrink Tubes 3M
3M 8429-18 Cold Shrink Tubes 32.2mm-67.8mm Diameters - 457mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8429-18 - Typical Applications
Insulation and sealing of inline cable splices and electrical connectors
Primary electrical insulation up to 1kV for cold shrink cable repairs
Conduit and cable breakout sealing - moisture barrier
Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
3M 8426-9 Cold Shrink Tubes
3M's 8420 series Cold Shrink EPDM Tubes are open-ended rubber sleeves that are factory expanded and placed over a removable core. They are used to provide primary electrical insulation and physical protection for cable splices and connections rated up to 1000 volts. The tubes are made of EPDM rubber and accommodate a wide range of cable sizes without additional heat or tools. When the core is removed, the tube shrinks to form a waterproof seal suitable for indoor, outdoor, and submerged applications. The tubes resist fungus, acids, alkalis, ozone, and ultraviolet light.
Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...
Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...Thorne & Derrick International
This document is a catalogue from Nexans Network Solutions Division Euromold. It provides information on various cable accessories produced by Euromold including separable connectors, bushings, and plugs. The document includes specifications, standards, and ordering information for product items like the 158LR elbow connector, 152SR straight connector, and 151SP straight plug. It also provides diagrams to illustrate the products and their applications for connecting cable to equipment or other cables.3M 8425-8 Cold Shrink Tube
3M Cold Shrink Tube 8425-83M 8425-8 Cold Shrink Tube
Cold Shrink Tube Min Diameter 10.2mm
Cold Shrink Tube Max Diameter 20.8mm
Cold Shrink Tube Length 203mm
3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core.
•Cold shrink provides a constant radial pressure seal
•No heat required with 3M Cold Shrink - 100% cold applied
•No specialist cable jointing or heat shrink tools required
•Quality - long term reliability
•Moisture resistant for submersible and outdoor applications
3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.
3M 8423-6 Cold Shrink Tube
3M Brand PST Cold Shrink Connector Insulators are open-ended, tubular rubber sleeves that are factory expanded and assembled onto a removable core. They are used to provide primary electrical insulation and physical protection for cable splices and connections rated up to 1000 volts. The insulators are made of EPDM rubber and are installed by removing the core, allowing the tube to shrink and form a waterproof seal around the cable or connection. They can be used for indoor, outdoor, overhead, buried, or submerged applications without additional heat or adhesives.
3M 8428-18 Cold Shrink Tube
3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables
3M Cold Shrink Tube 8428-183M 8428-18 Cold Shrink Tube
Cold Shrink Tube Min Diameter 24.0mm
Cold Shrink Tube Max Diameter 49.3mm
Cold Shrink Tube Length 457mm
3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core.
•Cold shrink provides a constant radial pressure seal
•No heat required with 3M Cold Shrink - 100% cold applied
•No specialist cable jointing or heat shrink tools required
•Quality - long term reliability
•Moisture resistant for submersible and outdoor applications
3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.
Similar to Gel Joints DSG Canusa CGEL 1000 (20)
Kraus & naimer main switches and maintenance switches kn500 gb1214
Kraus & naimer main switches and maintenance switches kn500 gb1214
Kraus & naimer main switches and maintenance switches kn500 gb1214-dienha...
Kraus & naimer main switches and maintenance switches kn500 gb1214-dienha...
Nexans Euromold 900 Series Interface F Asymmetrical Cable Connectors HV
Nexans Euromold 900 Series Interface F Asymmetrical Cable Connectors HV
Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...
Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...
HV Elbows, Nexans Euromold Connectors HV - 158LR Connectors, 12kV 250Amp - 70...
HV Elbows, Nexans Euromold Connectors HV - 158LR Connectors, 12kV 250Amp - 70...
Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...
Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...
More from Thorne & Derrick International
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.The Children North East Annual Golf Day Wednesday 9th May 2018
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
CATU Electrical Safety Catalogue
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-AThorne & Derrick International
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...Thorne & Derrick International
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...Thorne & Derrick International
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
T&D Experts In Equipment For Explosive Atmospheres
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
Ultrasonic Flow Meters - Customer Specification Demand
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Emtelle Fibre Optic Cables - Product Catalogue 2016
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick Process Heating Brochure 2016
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
Ripley Utility Tool Cable Preparation Tools
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
RIDGID micro CD100 Combustible Gas Detector
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron Fact Sheet
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...Thorne & Derrick International
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration, Air Conditioning & Heat Pumps Technical Options Committee’Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.More from Thorne & Derrick International (20)
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
The Children North East Annual Golf Day Wednesday 9th May 2018
The Children North East Annual Golf Day Wednesday 9th May 2018
3M Electrical Products Stocked By Thorne & Derrick International
3M Electrical Products Stocked By Thorne & Derrick International
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
T&D Experts In Equipment For Explosive Atmospheres
T&D Experts In Equipment For Explosive Atmospheres
Ultrasonic Flow Meters - Customer Specification Demand
Ultrasonic Flow Meters - Customer Specification Demand
Emtelle Fibre Optic Cables - Product Catalogue 2016
Emtelle Fibre Optic Cables - Product Catalogue 2016
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Recently uploaded
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Things to Consider When Choosing a Website Developer for your Website | FODUU
Choosing the right website developer is crucial for your business. This article covers essential factors to consider, including experience, portfolio, technical skills, communication, pricing, reputation & reviews, cost and budget considerations and post-launch support. Make an informed decision to ensure your website meets your business goals.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Recently uploaded (20)
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Things to Consider When Choosing a Website Developer for your Website | FODUU
Things to Consider When Choosing a Website Developer for your Website | FODUU
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Gel Joints DSG Canusa CGEL 1000
- 1. For fast and reliable installation of Straight and Branch connections for power, control and communication cables in all areas. • Tough outer case with cross linked polymer gel filling which meets class 2 of C.E.I. 64-8 and ANSI C119.90C operating temperature. • Flame retarded to I.E.C.332-1. • Resistant to repeated flexing and torsion. • Unlimited shelf life. • Available in two complete ranges: • CGEL 2000, suitable for 30o branch connections on 0.6/1kV extruded cables. • CGEL 1000, suitable for straight or multiple branch connections on 0.6/1kV extruded cables. WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 WWW.THORNEANDDERRICK.CO.UK
- 2. CGEL 2000 B(mm) A(mm) 30° C(mm) D(mm) CGEL 1000 B(mm) A (mm) D(mm) PRODUCT MAIN CABLE C.S.A. (mm2 ) BRANCH CABLE C.S.A.(mm2 ) PRODUCT MAIN CABLE C.S.A.(mm2 ) BRANCH CABLE C.S.A. (mm2 ) CGEL 1000 1X 2.5-50 2X 2.5-6 1X 1.5-10 2X 1.5 CGEL 2000 1X 2.5-25 1X 1.5-16 CGEL 1001 1X 6-95 2X 1.5-16 3X 1.5-10 4X 1.5-10 1X 1.5-35 2X 1.5-6 3X 1.5-6 4X 1.5-4 CGEL 2001 1X 6-95 2X 1.5-16 3X 2.5-16 4X 2.5-10 1X 1.5-70 2X 1.5-10 3X 1.5-10 4X 1.5-6 CGEL 1002 1X 50-185 2X 10-35 3X 6-35 4X 6-35 1X 16-185 2X 1.5-35 3X 1.5-35 4X 1.5-16 CGEL 2002 1X 50-150 2X 1.5-25 3X 4-25 4X 4-16 1X 1.5-70 2X 1.5-10 3X 1.5-10 4X 1.5-6 A B D 1000 95 43 28 1001 150 56 28 1002 220 85 46 A B C D 2000 75 30 40 21 2001 125 36 56 35 2002 185 47 75 43 WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 WWW.THORNEANDDERRICK.CO.UK