This document discusses garage lighting and the elliptipar system. [1] The elliptipar system illuminates the entire parking level with diffuse indirect light that eliminates glare and shadows between cars. [2] This luminous environment contributes to users' feelings of safety and security. [3] As an added benefit, the exterior glows invitingly without producing glare, and the increased lighting helps generate more traffic and attendance.
Aliseo is a German company founded in 1985 that focuses on innovative bathroom product design and technology. Over the past 20 years, Aliseo has developed several energy efficient product lines including LED mirrors that use 50% less energy, hair dryers that use 30% less energy, and infrared hair dryers that require 50% less energy and drying time. More recently, Aliseo introduced an LCD mirror with a built-in monitor and OLED mirrors that generate their own light for ultra thin designs.
ECO Energy provides LED lighting retrofit solutions for commercial facilities. Their LED lights reduce energy consumption by 70-90% and typically pay for themselves within 3 years. ECO Energy guarantees minimum savings of 25% and monitors actual savings through real-time energy meters. Their LED lights can replace high-intensity discharge lights and include options for ballasts, lenses, distributions, and warranties.
This document describes the anatomy and features of a perfect sounding Parker guitar. It highlights the guitar's lightweight and reinforced construction that provides responsive playability. It also details the guitar's multiple pickup configurations that allow it to produce both powerful electric and full-bodied acoustic tones. Finally, it discusses the guitar's precise fretting, tuned neck joint design, and easily adjustable components that contribute to its uncompromising tone and playability.
EverLast is a new lighting solution from Full Spectrum Solutions that provides significant maintenance and cost savings over traditional lighting options. With a rated life of up to 100,000 hours, EverLast fixtures require virtually no maintenance and eliminate dangerous bulb changes. They can also reduce lighting electricity costs by up to 60% compared to other solutions. EverLast delivers high quality, long-lasting light while cutting facility lighting costs and improving safety.
Solar lighting provides a cost-effective alternative to grid-connected lighting for pathways and trails. Solar lights can be installed at a lower cost than trenching, wiring, and connecting to the electrical grid. They also avoid environmental impacts from installing underground infrastructure. Solar lights are powered by the sun and produce no greenhouse gases. They provide safety and security for trails at night without requiring electrical service or equipment.
The document proposes three concepts for LED lighting solutions in Russia:
1. A ceiling and wall light panel system with adjustable LED modules and remote control that allows creation of different lighting patterns.
2. A hanging lamp with adjustable LED modules on flexible arms that can provide both exhibition and office lighting.
3. A spiral-shaped LED light system that can be installed on ceilings or walls, using different LED types to provide main or decorative lighting for long spaces.
This document provides information on various lighting luminaire concepts and products from a company. It includes product descriptions, technical specifications, and ordering codes for multiple spotlight models including Proxima, Osaka, Iwaki, Kagawa, and Kobe. The luminaires are designed for indoor use and can incorporate LEDs, fluorescent, or metal halide light sources. Mounting options and applications are specified for each model.
Aliseo is a German company founded in 1985 that focuses on innovative bathroom product design and technology. Over the past 20 years, Aliseo has developed several energy efficient product lines including LED mirrors that use 50% less energy, hair dryers that use 30% less energy, and infrared hair dryers that require 50% less energy and drying time. More recently, Aliseo introduced an LCD mirror with a built-in monitor and OLED mirrors that generate their own light for ultra thin designs.
ECO Energy provides LED lighting retrofit solutions for commercial facilities. Their LED lights reduce energy consumption by 70-90% and typically pay for themselves within 3 years. ECO Energy guarantees minimum savings of 25% and monitors actual savings through real-time energy meters. Their LED lights can replace high-intensity discharge lights and include options for ballasts, lenses, distributions, and warranties.
This document describes the anatomy and features of a perfect sounding Parker guitar. It highlights the guitar's lightweight and reinforced construction that provides responsive playability. It also details the guitar's multiple pickup configurations that allow it to produce both powerful electric and full-bodied acoustic tones. Finally, it discusses the guitar's precise fretting, tuned neck joint design, and easily adjustable components that contribute to its uncompromising tone and playability.
EverLast is a new lighting solution from Full Spectrum Solutions that provides significant maintenance and cost savings over traditional lighting options. With a rated life of up to 100,000 hours, EverLast fixtures require virtually no maintenance and eliminate dangerous bulb changes. They can also reduce lighting electricity costs by up to 60% compared to other solutions. EverLast delivers high quality, long-lasting light while cutting facility lighting costs and improving safety.
Solar lighting provides a cost-effective alternative to grid-connected lighting for pathways and trails. Solar lights can be installed at a lower cost than trenching, wiring, and connecting to the electrical grid. They also avoid environmental impacts from installing underground infrastructure. Solar lights are powered by the sun and produce no greenhouse gases. They provide safety and security for trails at night without requiring electrical service or equipment.
The document proposes three concepts for LED lighting solutions in Russia:
1. A ceiling and wall light panel system with adjustable LED modules and remote control that allows creation of different lighting patterns.
2. A hanging lamp with adjustable LED modules on flexible arms that can provide both exhibition and office lighting.
3. A spiral-shaped LED light system that can be installed on ceilings or walls, using different LED types to provide main or decorative lighting for long spaces.
This document provides information on various lighting luminaire concepts and products from a company. It includes product descriptions, technical specifications, and ordering codes for multiple spotlight models including Proxima, Osaka, Iwaki, Kagawa, and Kobe. The luminaires are designed for indoor use and can incorporate LEDs, fluorescent, or metal halide light sources. Mounting options and applications are specified for each model.
The document provides instructions for mounting the AR800 architectural area lighting fixture. It describes:
1) Attaching a quick mount bracket and leveling it on the wall.
2) Lifting the fixture and hooking it to the mounted bracket.
3) Screwing the bracket tightly to secure the fixture to the wall.
The document discusses lighting concepts for a glazed building, including the use of fabric sails and projector-reflector lighting systems during the day to diffuse light and prevent glare, and recessed floor luminaires at night to provide accent lighting with precise beams and glare limitation. Groups of stretched fabric sails are used to lower ceiling heights and add visual interest while filtering 40-80% of visible light. Projector-reflector systems break up directional light beams for uniform distribution without glare.
Solar lighting systems are an economic choice for parking lot lighting that saves on both installation and ongoing electrical costs compared to grid-connected lighting. Solar lights are easy to install without trenching or wiring and provide reliable light every night using integrated battery backups. For the example campus parking lot, a solar lighting solution would save over $46,000 in installation and annual electrical costs compared to grid-connected lighting.
Kalwall is a highly insulating daylighting system made of glass prisms bonded to an aluminum grid core. It transmits diffuse natural light while minimizing solar gain, glare, and shadows. Kalwall provides maximum environmental and energy benefits with proven structural integrity and code compliance. No other fenestration system matches Kalwall's performance advantages of natural daylighting, thermal insulation, sustainability, and durability over 50 years.
electrical luminaries and market surveysahil saifi
A luminaire is defined in Article 100 as “a complete lighting unit consisting of a lamp or lamps together with the parts designed to distribute the light, to position and protect the lamps and ballast (where applicable), and to connect the lamps to the power supply.” Since luminaires (lighting fixtures) were not previously defined before the 2002 NEC, this new definition is meant to cover all aspects of a lighting unit, including the lamps that actually provide the illumination, as well as internal and external parts necessary for the proper operation of the unit.
The PV1 subwoofer has a spherical curved shape that is ideal for withstanding inside and outside pressure differences. Its thin aluminum enclosure maximizes internal volume while maintaining strength. Twin 8-inch back-to-back drivers minimize internal pressure differences and deliver powerful 500-watt amplification with dynamics and control. The subwoofer accepts both line level and speaker level inputs and has adjustable frequency response and output.
Proper lighting design in schools is important for several key areas. Lighting should provide adequate illumination for teaching walls to enhance lesson visibility. Circulation areas like hallways require lighting that maintains safety. Entries and lobbies need lighting that creates a welcoming environment. Cafeterias and libraries benefit from lighting designs that limit glare and encourage activities. Sports areas require specialized lighting for both playing surfaces and seating areas. The document outlines various school projects and their architects that have effectively addressed lighting challenges in these spaces.
These luminaires are designed to provide ambient and low-glare task lighting for worksurfaces. They mount above seated or standing height and feature anti-glare lenses. Models L201 and L221 have mounting channels, while L202 has smooth front and rear panels and L222 has a scalloped front. They come in lengths from 36" to 96" and have extruded aluminum housings, T5 lamps, and electronic ballasts for efficient lighting that uses as little as 0.6W per square foot.
Furniture-mounted task/ambient lighting offers significant energy savings by avoiding overlighting of non-task areas. It positions luminaires close to tasks and delivers uplighting from below standing eye height and task lighting from above seated eye height. These lighting solutions have been designed for visual comfort and privacy since 1965 and use efficient T5 lamps and electronics to deliver light precisely without waste or glare.
The document discusses elliptipar lighting solutions for houses of worship, highlighting their ability to provide uniform, energy efficient lighting that enhances architectural details while promoting visual comfort for worshippers through various lighting styles and lamp sources tailored for different spaces like naves, chapels, and altars. Elliptipar offers asymmetric luminaires that generate more light with fewer fixtures through unique reflector designs that project light uniformly across surfaces. Photos showcase elliptipar lighting installations in various churches, temples, and monasteries around the world.
Tambient is an open-plan office lighting system that provides both task and ambient lighting using a single T5 lamp in each luminaire. It is a sustainable design that achieves high energy efficiency and performance. Tambient luminaires are low profile, elegant, and can be mounted on panels, desks or floors. They light work surfaces and ceilings while creating a lean energy work environment. Tambient qualifies for LEED credits and utility rebates due to its ability to achieve low lighting power density and save energy by not over-lighting non-task areas.
The document summarizes lighting for a public library in Bloomfield Hills, Michigan. It describes the use of 30|30 stacklights that provide 30 vertical footcandles of light at 30 inches from the floor using only 28W T5 lamps. The stacklights are mounted to custom arms fastened to the shelving every other run. This provides the recommended light levels for book stacks while using only 1.34W per square foot, meeting energy code standards. The document also introduces new 30|30 stacklight models that provide 6% uplight from the same lamp without compromising the downlight distribution.
The Lighting Quotient is a lighting company that has been producing innovative and efficient lighting products for over 30 years out of their West Haven, CT facility. They are committed to reducing their environmental impact and creating sustainable and energy-efficient lighting solutions. Their design and innovation creates technical and aesthetically appropriate lighting products that advance the art and science of lighting.
The document provides instructions for mounting the AR800 architectural area lighting fixture. It describes:
1) Attaching a quick mount bracket and leveling it on the wall.
2) Lifting the fixture and hooking it to the mounted bracket.
3) Screwing the bracket tightly to secure the fixture to the wall.
The document discusses lighting concepts for a glazed building, including the use of fabric sails and projector-reflector lighting systems during the day to diffuse light and prevent glare, and recessed floor luminaires at night to provide accent lighting with precise beams and glare limitation. Groups of stretched fabric sails are used to lower ceiling heights and add visual interest while filtering 40-80% of visible light. Projector-reflector systems break up directional light beams for uniform distribution without glare.
Solar lighting systems are an economic choice for parking lot lighting that saves on both installation and ongoing electrical costs compared to grid-connected lighting. Solar lights are easy to install without trenching or wiring and provide reliable light every night using integrated battery backups. For the example campus parking lot, a solar lighting solution would save over $46,000 in installation and annual electrical costs compared to grid-connected lighting.
Kalwall is a highly insulating daylighting system made of glass prisms bonded to an aluminum grid core. It transmits diffuse natural light while minimizing solar gain, glare, and shadows. Kalwall provides maximum environmental and energy benefits with proven structural integrity and code compliance. No other fenestration system matches Kalwall's performance advantages of natural daylighting, thermal insulation, sustainability, and durability over 50 years.
electrical luminaries and market surveysahil saifi
A luminaire is defined in Article 100 as “a complete lighting unit consisting of a lamp or lamps together with the parts designed to distribute the light, to position and protect the lamps and ballast (where applicable), and to connect the lamps to the power supply.” Since luminaires (lighting fixtures) were not previously defined before the 2002 NEC, this new definition is meant to cover all aspects of a lighting unit, including the lamps that actually provide the illumination, as well as internal and external parts necessary for the proper operation of the unit.
The PV1 subwoofer has a spherical curved shape that is ideal for withstanding inside and outside pressure differences. Its thin aluminum enclosure maximizes internal volume while maintaining strength. Twin 8-inch back-to-back drivers minimize internal pressure differences and deliver powerful 500-watt amplification with dynamics and control. The subwoofer accepts both line level and speaker level inputs and has adjustable frequency response and output.
Proper lighting design in schools is important for several key areas. Lighting should provide adequate illumination for teaching walls to enhance lesson visibility. Circulation areas like hallways require lighting that maintains safety. Entries and lobbies need lighting that creates a welcoming environment. Cafeterias and libraries benefit from lighting designs that limit glare and encourage activities. Sports areas require specialized lighting for both playing surfaces and seating areas. The document outlines various school projects and their architects that have effectively addressed lighting challenges in these spaces.
These luminaires are designed to provide ambient and low-glare task lighting for worksurfaces. They mount above seated or standing height and feature anti-glare lenses. Models L201 and L221 have mounting channels, while L202 has smooth front and rear panels and L222 has a scalloped front. They come in lengths from 36" to 96" and have extruded aluminum housings, T5 lamps, and electronic ballasts for efficient lighting that uses as little as 0.6W per square foot.
Furniture-mounted task/ambient lighting offers significant energy savings by avoiding overlighting of non-task areas. It positions luminaires close to tasks and delivers uplighting from below standing eye height and task lighting from above seated eye height. These lighting solutions have been designed for visual comfort and privacy since 1965 and use efficient T5 lamps and electronics to deliver light precisely without waste or glare.
The document discusses elliptipar lighting solutions for houses of worship, highlighting their ability to provide uniform, energy efficient lighting that enhances architectural details while promoting visual comfort for worshippers through various lighting styles and lamp sources tailored for different spaces like naves, chapels, and altars. Elliptipar offers asymmetric luminaires that generate more light with fewer fixtures through unique reflector designs that project light uniformly across surfaces. Photos showcase elliptipar lighting installations in various churches, temples, and monasteries around the world.
Tambient is an open-plan office lighting system that provides both task and ambient lighting using a single T5 lamp in each luminaire. It is a sustainable design that achieves high energy efficiency and performance. Tambient luminaires are low profile, elegant, and can be mounted on panels, desks or floors. They light work surfaces and ceilings while creating a lean energy work environment. Tambient qualifies for LEED credits and utility rebates due to its ability to achieve low lighting power density and save energy by not over-lighting non-task areas.
The document summarizes lighting for a public library in Bloomfield Hills, Michigan. It describes the use of 30|30 stacklights that provide 30 vertical footcandles of light at 30 inches from the floor using only 28W T5 lamps. The stacklights are mounted to custom arms fastened to the shelving every other run. This provides the recommended light levels for book stacks while using only 1.34W per square foot, meeting energy code standards. The document also introduces new 30|30 stacklight models that provide 6% uplight from the same lamp without compromising the downlight distribution.
The Lighting Quotient is a lighting company that has been producing innovative and efficient lighting products for over 30 years out of their West Haven, CT facility. They are committed to reducing their environmental impact and creating sustainable and energy-efficient lighting solutions. Their design and innovation creates technical and aesthetically appropriate lighting products that advance the art and science of lighting.
2. …comfort …safety …security
The #1 issue with parking garages is a sense of safety
and well-being for those who use them. Lighting that
alternates glare with dark shadows between cars and
in the corners can create feelings of apprehension.
elliptipar's garage lighting illuminates the whole
parking level by projecting broad planes of light across
the ceiling. The resulting diffuse indirect illumination
eliminates glare and minimizes dark shadows.
This luminous environment contributes to the users’
perceptions of safety and security. As an added
benefit, the exterior glows invitingly without producing
glare to surrounding properties and traffic ways
(see cover).
MICHAEL DERSIN PHOTOGRAPHY
...the payback is in the
increased traffic and attendance
generated from creating a welcoming,
safe and luminous place to park.
Style M156 one-way pendants with 250W metal halide lamps illuminate
this parking facility at a Columbia, Maryland shopping mall.
3. quality and performance you can feel comfortable with
Direct and direct/indirect lighting systems, Available in several styles with high output metal
in an attempt to light wide areas from a low halide lamps and integral CWA ballasts. Rugged
mounting height, create excessive brightness construction features elliptipar’s precisely
at high angles. This results in discomfort glare extruded aluminum reflector, tempered glass
that hinders the drivers’ and pedestrians’ ability lens, tamper-resistent door screws and all
to see. aluminum and stainless steel components.
The durable abrasion and fade resistant finish
elliptipar’s indirect lighting system meets the
begins with a 6-stage pretreatment, followed by
visual challenge of insuring safety in a space
an electrostatically applied thermoset polyester
shared by both vehicles and pedestrians. Light
powder coat. Reflectors are sealed for wash-
is directed upward eliminating direct glare and
down. UL Listed or CSA Certified.
the diffuse reflected light minimizes excessive
contrast, improving visibility.
elliptipar’s high performance asymmetric Style 156 One-way
250W reflector projects broad planes of light across ■ Extruded aluminum stem
MH the ceiling. The unique flared visor shields lamp houses integral
encapsulated ballast
brightness yet allows far-reaching forward throw (lengths from 30" to 72")
and wide lateral distribution. ■ Flexible installation on level
12,000 Cd
or sloped decks; recessed
J-box or surface conduit
The result is diffuse reflected illumination that ■ Rugged stainless steel
mounting plate
effectively lights the spaces between vehicles
irrespective of the positions of the luminaires or
the vehicles.
Style 156 Two-way
■ Economical uplighting for
adjacent bays
■ Larger stem houses two
CWA ballasts rated
for -20°F starting
■ Optional canopy conceals
bolt plate
The garage feels comfortable and secure as the
structure and walls are brightened. Good vertical Style 456
illuminance allows for high visibilty of vehicles and
BOB GRIER PHOTOGRAPHY
■ Uplighting from perimeter
pedestrians as well as signage. or core walls
■ Choose wall plate to mount
over J-box or mounting
...garage lighting feet with surface conduit
that feels good!