FUTURE DESIGNS LIGHTBOOK V15

FUTUREDESIGNS
FUTURE Designs
Headquarters
The Lighthouse
Fircroft Way
Edenbridge
Kent TN8 6EJ
HQ +44 (0)1732 867420
LDN +44 (0)20 7515 3763
light@futuredesigns.co.uk
futuredesigns.co.uk
London Office
Unit 401
Wharfside Point Sth
4 Preston Road
London E14 9EL
Dubai Headquarters
Office 4C Level 4,
Union National Bank
Building,
Khalid Bin Waleed Street
(Bank Street), Bur Dubai
Dubai,
United Arab Emirates
1

2
WeMakeLight
LIGHTING IS DYNAMIC
LIGHTING IS EMOTIVE
LIGHTING CAN INSPIRE, ENGAGE AND
MOTIVATE
Established in 1991, FUTURE Designs is a UK
based designer and manufacturer of high quality
luminaries and bespoke lighting solutions,
with a proud heritage of meeting the exacting
demands and requirements of clients, designers
and engineers in all sectors of the property and
construction industry.
Supported by a carefully managed programme of
research and development, FUTURE Designs is
committed to the very best in lighting solutions
from concept through to installation and after
sales service.
FUTURE Designs understands that good energy
performance is critical financial management
for building owners and occupiers in these
times of ever increasing energy costs and the
introduction of carbon taxes.
FUTURE Designs is an LED specialist, constantly
investing in development and innovative
products by the productive
and efficient use of materials.
We design, engineer and produce our products
to fulfil one desire: MAKING LIGHT WORK.
futuredesigns.co.uk
+44 (0)1732 867420

FUTUREDESIGNS
3
INTRODUCTION
2-9
GUIDE TO LIGHT
11-40
RECESSED
41-84
SUSPENDED /
SURFACE
85-132
DOWNLIGHT
& ACCENT
133-170
BESPOKE
171-198
INDEX
199

Rushlights
Rushlights were very cheap and easy to make
(and have been used since the Middle Ages).
Candles were expensive, both due to the
materials and because they were taxed. So
poor families needed a cheaper means of
illumination. Rushlights were made by taking
a rush (or even a splinter of wood) and
dipping it in grease. Rushes were cut fresh
and then soaked. Soaking them made it easier
to peel off the hard outer skin. Then the rush
would be dipped in mutton grease (or other
animal fat). There were special holders for
rush lights that pinched the wood between
metal pliers.
Once the rush burned down to the pinchers,
the light went out. Obviously, rushlights did
not burn for very long so you'd have to keep
burning new ones if you weren't going to bed
1809
Humphry Davy, an
English chemist, used a
high powered battery
to induce an electrical
current between two
strips of charcoal. The
current
flow through the high
impedance material
induced light creating
the first arc lamp. 1823
By 1823 there were 40,000 gas
street lamps, lighting 213
streets in London.
1841
Frederik de Moleyns, received the first patent
for an incandescent lamp. The design
specifications involved mounting a powdered
charcoal filament between two platinum wires
in a glass bulb under vacuum. As the filament
reacted at high temperature with air,
the air present in the lamp was evacuated to
extend filament life.
1845
W.E. Staite, an American, patented
a second incandescent electric
lamp in England. Thomas Wright
obtained the first patent for the arc
lamp.
1860
John T. Way demonstrated that sending
electricity through mercury vapour
contained in a glass tube could produce
light, the precedent for the development of
the modern fluorescent light.
The electric current that ran through
the vaporised mercury excited that gas to a
higher energy state. As the excited gas
atoms return to their ground energy,
their excess energy is given off as visible
light.
Mid 1870s
Electricity revolutionised London from the
mid-1870s. As well as providing bright lighting
for streets and theatres, it also powered lifts
and escalators.
1879
Both Thomas A. Edison of the United States and Joseph
Wilson Swan of England, produced carbon filament
incandescent lamps that burned for a practical length
of time. Edison used carbon fibre derived from cotton.
His first bulbs lasted for 13.5 hours. Later improved
bulbs of this design lasted for 40 hours.
1906
General Electric Company patented a method
for making tungsten filaments for use in
incandescent lamps. The high melting point of
tungsten, (3,410˚C), its low vapour pressure,
hence low evaporation rate at high
temperature, and relatively low cost provided
clear advantages over previous filament
materials.
1850s
By the 1850s gas lighting in theatres has spread
almost world-wide. The theatre that used the most
gas lighting was the Astley's Equestrian
Amphitheatre in London. According to the
Illustrated London News 'Everywhere white and gold
meets the eye, and about 200,000 gas jets add to the
glittering effect of the auditorium … such a blaze of
light and splendour has scarcely ever witnessed,
even in dreams. 'Theatres were switching over to gas
lighting not just because it was more economical
than using candles but also required less labor to
operate. With gas lighting, theatres would no longer
need to have people tending to candles during a
performance, or having to light each candle
individually.“It was easier to light a row of gas jets
than a greater quantity of candles high in the air.”
(Pilbrow 174). Theatres also no longer need to worry
about wax dripping on the actors during a show.
1868
The first traffic light lanterns were invented by J.P.
Knight. London is believed to be the first city with a
traffic light. In the 1860s, London had intersections
near the House of Parliament that had rotating
lanterns with red and green lights that helped control
horse-and-buggy traffic. Less than a month after the
lights were installed the lamp blew up seriously
injuring the policeman who was operating it.
1880
Edison discovered that bamboo produced a better carbon
fibre filament. The new lamps lasted for 1200 hours.
1881
The first electric street lighting to light Britain
were experimental arrays of arc lamps to light
Holburn Viaduct and the Thames Embankment.
More than 4,000 were used in 1881.
1904
Willis R. Whitnew developed
a metallized, or metal coated,
carbon filament that
preceded the development
of the tungsten filament.
1907
The first commercial tungsten filament for
incandescent lamps became available.
Tungsten wire manufacturing was still costly
and difficult.
1800
In the 18th century groups of men called
Improvement Commissioners or
Pavement Commissioners were formed.
They had powers to pave, clean and
light streets with oil lamps.
1807
Though gas lamps were used on a couple of
London streets as early as August 1807, it was
not a common light source in the Regency
period. During the Georgian/early Regency era,
street lamps typically used whale oil.
1817
Around 1817, London theatres started
to use gas lighting and there were other
big towns that were partially lit by gas
1819
It wasn't until 1819 that 288 miles of gas lines
were laid throughout London to light up
the streets and public areas of the city.
1820
The first known attempt to produce
an incandescent light bulb.
1840
William Robert Grove an English
scientist, succeeded in lighting an
auditorium with incandescent
lamps.
The lamps were constructed of
platinum coils encased in an
inverted glass sealed by water.
Unfortunately, the platinum coil
lamps were too expensive and
impractical for commercial use.
1846
John Daper patented a platinum filament incandescent
electric lamp. The high melting point of the filament
allowed it to operate at a higher temperature than many
other metallic elements that were tested.
Due to a phenomena known as black body radiation,
higher temperature filaments produce more visible light.
The high cost and scarcity of platinum deemed this
design impractical for widespread commercial use.
4
A Brief Hist

FUTUREDESIGNS
futuredesigns.co.uk
DESIGNS
1925
Incandescent bulbs
with frosted glass
interiors were produced.
The frosted glass filters
out undesirable
wavelengths of light
emitted by the filament
to produce a 'soft' light.
1938
GE invents the fluorescent lamp.
This is the first practical
low-pressure discharge lamp
to provide white light.
1939
The T12 fluorescent lamp
was launched.
MID 1960s
The first light emitting diode (LED)
was invented.
These first LEDs were red and later used
as indicators in many applications.
1970s
A vast colour range of green, yellow
and orange LEDs were invented.
There was also the discovery and
development of high conductivity
polymers which later become used
in Organic LEDs (OLEDs).
1930
Photo flash bulbs were
introduced in photography.
1939
Britain was blacked out on 1st September
1939, two days before the outbreak of war.
Street lights were switched off or dimmed
and shielded. Traffic lights and vehicle
headlights were fitted with slotted covers
to deflect the beam downward.
Tragically thousands of people died in road
accidents due to this.
Other people were injured in the Blackout
because they could not see in the darkness.
1947
After World War II Oslo gave
the gift of a Christmas tree to the
people of Britain as a token of
gratitude for the support to Norway
during the war.
Every year since then a tree is
donated by Norway and displayed in
Trafalgar Square to celebrate this and
each year the tree the tree has a
lighting ceremony which takes place
the first Thursday of December.
Thousands of people witness the
lights being switched on every year.
1960
Brighter halogen-filled incandescent lamps
were introduced. Halogen gas slows the
filament evaporation rate allowing it to operate
at higher temperatures.
EARLY 1980s
LEDs continued to improve in
light output.
Superior LEDs were developed
with new technologies.
1981
The T8 fluorescent lamp was launched.
1987
First working Organic LED development.
1995
The T5 fluorescent lamp was launched.
2008
First OLED lighting applications demonstrated.
2009
In 2009 Tower Bridge was lit using LED.
Due to their being so much natural light
during the day the lighting was not required
to make such an impact as the night time
lighting, however in the winter months on a
gloomy London day, track lighting provides
adequate light for the thousands of tourists
passing through.
2007
In July of 2007 British Gas lamp attendants turned back
the clock at a special ceremony in Westminster to mark
two hundred years of lighting London's historic gas
street lights. A green plaque was unveiled by the Lord
Mayor of Westminster, Councillor Carolyn Keen, to
celebrate the two hundredth anniversary of the first
gas lights being built in the capital in 1807.
To mark the occasion, British Gas' longest-serving lamp
attendant Martin Caulfield also lit a lamp using the
traditional pole for the first time since they were
switched to an automatic timing system in 1985.
2010
A lighting tower is lifted into place on the Olympic Stadium. The 28m high lighting
towers sit on top of the inner ring of the venue's cable net roof. These floodlight were
switched on at a ceremony on 20th December. Prime Minister David Cameron
switched on the lights at 1815 GMT and commended the team for the 'great job'.
There are 14 lighting towers reaching 70m above the sports area.
They are supporting a total of 532 individual lights, which took some time to warm
up. The prime minister added: 'In just one year, seven months, seven days, two hours
and about 12 minutes, the biggest show in the world comes to town'.
OLED - FUTURE OF LIGHTING
OLEDs are the next progression and development of
LEDs. Organic light emitting diodes (OLEDs) seem
destined to be a clean, eco-friendly solution to lighting
in the very near future. OLEDs are basically LEDs whose
electroluminescent surface layer is composed of organic
compounds. The compounds can easily be laid down in
rows and columns on a polymer substance that holds
them in place. OLEDs can be used for television and
computer screens as well as lighting. The OLEDs'
advantage over LCDs lies in the fact that they require no
backlight, allowing them to operate on far less power,
and thus far longer on a single charge.
1988
Canary Wharf was constructed and as this
was currently the highest building one
of the fundamental features is the pyramid
roof which contains a flashing aircraft
warning light.
1991
Philips developed a light bulb
that uses magnetic induction
to excite a gas to emit light.
There are no parts to wear out
in this design, so the expected
lifetime for a bulb
is 60,000 hours.
MID 1990s
High-brightness
blue LED
was invented.
1998
A light sculpture of 'Traffic Light Tree' was
funded and produced by the Public Art
Commissions Agency situated just beyond
the Canary Wharf estate. The arbitrary cycle
of light changes are not supposed
to mimic the seasonal rhythm of nature, but
the restlessness of Canary Wharf.
2011
As part of the continuing effort
to reduce energy consumption
the Upper Thames Street
project is the first tunnel in the UK
to be provided with a fully linear lighting
instillation exclusively provided
using LED technology.
LED - THE PRESENT
AND FUTURE OF LIGHTING
LED is rapidly replacing traditional
fluorescent and incandescent sources. A light
emitting diode consists of multiple layers of
semi-conducting material. When the diode is
being used with direct current, light is
produced in the active layer. The light
produced is decoupled directly or by
reflections. In contrast to incandescent
reflector lamps, which emit a continuous
spectrum, an LED emits light in a particular
colour. The light's colour depends on the
semiconductor material used. Two material
systems are mainly used, in order to produce
LEDs with a high degree of rightness in all
colours from blue to red and, by means of
luminescence conversion, also in white.
BIOLIGHT - FUTURE OF LIGHTING
Philips released details about their
innovative research in renewable and
naturally inspired lighting. BioLight is a
look into utilising glowing bacteria to
eventually light our homes without the
use of electricity. The same way certain
fireflies and insects species glow at
night, certain bacteria carry the same
genes and figured out a way to
concentrate that light at impressive
levels.
Bio-luminesence is created by a
chemical reaction where an enzyme
called luciferase interacts with a
light-emitting molecule called luciferin.
A steel frame that holds various glass
jars with liquid holding a high
concentrate of light emitting bacteria
could be the future of 'natural lighting'
in the modern home.
5
tory of Light

Sustainability We start considering
the environment long
before the lights go on.
At FUTURE Designs we
recognise that good energy
performance is sound financial
management. With ever
increasing energy prices, the
introduction of carbon taxes
and increased volatility in
energy markets, the energy
performance of a building
is moving up the agenda of
owners and occupiers alike.
We have always produced
high efficiency, low energy
luminaires but we are
constantly striving to do even
more. Giving you useful
light in the right places for
lower energy input is our aim
and we do this with not just
highly efficient luminaires,
but efficient control systems,
dimmers, presence and
daylight detectors.
Reduced energy use means
lower carbon emissions for the
entire life of the product. We
have also continually worked
towards creating less waste
and fewer emissions in our
manufacturing process.
Responsibility
We are fully committed to taking responsibility for our products,
designing for low impact and low waste manufacture and
designing for end of life. The primary elements of steel,
aluminium, glass, plastic and copper can be recovered and re-
used.
Waste Electrical and Electronic Equipment (WEEE) is a regulation
which governs the safe collection, treatment, recovery and
environmentally sound disposal of electronic products. As a
registered member of Lumicom we can ensure that we adhere to
the directive and ensure that our products are ‘reused, recycled &
recovered’ in an environmentally friendly way.
Lumicom
FUTURE Designs is proud to be a member of Lumicom.
Lumicom is a nonprofit initiative from LIF (Lighting Industry
Federation) working under the Producer Compliance Scheme
(PCS) for the WEEE directive.
6
futuredesigns.co.uk

FUTUREDESIGNS
DesignTools
7
futuredesigns.co.uk

Research&Development FUTURE Designs operates an in-house Research &
Development facility to ensure our luminaires are
unsurpassed in both performance and aesthetics.
Our philosophy is always to push the boundaries by
questioning the norm.
We constantly develop new and exciting product
ranges to meet the needs of our diverse client
base. We believe that even if a product has been
successful in the market there is always room to
further develop the success, be it through more
efficient manufacturing or by incorporating the latest
materials.
Our on-site facility allows us to control the
development of our luminaires from initial idea
conception through to launch.
Research & Development
3D Solidworks
development model.
Design for aesthetics and
function. Photometric Testing
Photopia virtual
photometric test. To test
performance and light
distribution. Check for
Building Regulations Part
L & ECA (Enhanced Capital
Allowance) schemes.
Lux Level Testing
Initial Relux lighting
calculations to check
typical lux levels, energy
consumption for BREEAM,
LEED, SKA, ESTIDAMA.
Design Brief
A brief from our client either
for a standard luminaire,
bespoke product or scheme.
Final Design
The tests allow us to refine
and produce fully workable
manufacturing drawings.
Concept & Specification
Initial Concept through
hand sketching and card
models. At this stage no
idea is discounted as even
the most obscure idea
could be the answer we are
looking for.
Manufacture
Production of our
luminaires in full swing
and from here they are
packaged and sent to our
clients.
First Install
Arguably our favourite stage
in the process where we see
our product in situ and the
full effect of an install.
Independent Photometric
Testing
Independent photometric
labs provide us with a final
photometric report.
8
futuredesigns.co.uk

FUTUREDESIGNS
28 - 008
INFORMAL MEETING
28 - 002
SS
28 - 004
ADMIN
28 - 006
CF
28 - 009
ACCOUNT
28 - 010
HEAD OF
DEPARTMENT
28 - 011
LEGAL
28 - 013
HR
28 - 016
STORE
28 - 17
MALE
RESTROOM
28 - 018
PRINT/
COPY
28 - 007
QUIET
28 - 005
VISITOR
OFFICE
28 - 003
WARDROBE
28 - 012
HEAD OF
DEPARTMENT
28 - 015
HEAD OF
DEPARTMENT
28 - 014
HEAD OF
DEPARTMENT
28 - 031
SERVER
CLG-5
CLG-5
CLG-5
CLG-5
CLG-5
CLG-5
CLG-5
CLG-5
CLG-5
CLG-5
CLG-5
CLG-7
CLG-3
CLG-3
CLG-3
CLG-3
CLG-3
CLG-3
CLG-3 CLG-3 CLG-3
CLG-3
CLG-3
CLG-5
CLG-5
CLG-5 CLG-3 CLG-3
CLG-3
CLG-3
CLG-5
OX-1
FOR LIGHTING AND SERVICES SPECIFICATIONS
AND LOCATIONS REFER TO LIGHTING DRAWINGS
AND M&E CONSULTANT INFORMATION
SYMBOL DESCRIPTION
RECESSED LUMINAIRE
DOWNLIGHTER
PARTITION CONTINUING ABOVE CEILING
FINISHED CEILING LEVEL ABOVE FFL LEV XX
SETTING OUT POINT
DRYWALL DOWNSTAND IN CEILING VOID
WALLWASHER
INDIRECT LIGHTING
600x600 LIGHTING PANEL
FIRE BARRIER ABOVE CEILING
LINEAR LUMINAIRE
HATCH DENOTES
AREA OF FULL
HEIGHT FURNITURE/
JOINERY
WORK PROTECTED
AREAS,
LANDLORDS DEMISE &
WORKS NOT IN THIS
CONTRACT.
ACOUSTIC BARRIER ABOVE CEILING
NOTE: BARRIER TO OVERLAP OVER
BY DOOR MIN 500mm LEAVING A
RETURN AIR GAP
PENDANT LIGHTING
DRAWING CATEGORY -
REFLECTED CEILINGS
CEIILING LEVEL CHANGE
CEIILING FINISH - REFER TO FINISHES SCHEDULE
CUSTOM LENGTH LINEAR LUMINAIRE
RECESSED SYSTEM LUMINAIRE (DOWNLIGHTER+ LINEAR)
CLG-#
INDIRECT LINEAR LIGHTING
CL CENTER LINE
Design Relux
For professional light planning and scheme design. Virtual
spaces are modelled producing results for light levels, task area
illuminance, energy W/m², cylindrical illuminance and light levels
on walls and ceilings.
AutoCAD
A versatile design tool used by designers to create manufacturing
drawings, lighting schemes and lighting schematics. This industry
standard software is widely used by architects, lighting designers
and planners to produce accurate drawings.
Photopia
An advanced lighting design and simulation package giving fast
and accurate photometric analysis. Photopia allows you to produce
virtual luminaires without timely physical prototypes enabling a
number of design variations to be tested without altering tooling.
SolidWorks
3D product design and engineering, bespoke product design and
testing. Accurate drawings and models for concept and manufacture.
9
futuredesigns.co.uk

LIGHTINGGUIDE
GuideToLight
11
futuredesigns.co.uk
13/ Lighting Design Considerations
12/ Light Planning Quick Reference
14/ Luminaire Types
15/ Lighting People & Tasks
16/ Technical Considerations
17/ LED Specification
18/ Benefits of LED
19/ Case Study PLL to LED
20/ Case Study Linear T5 to LED
21/ Case Study T8 to LED
22/ Power Over Ethernet
23/ ECA, LEED, BREEAM & Efficacies
24/ Emergency Lighting
25/ Emergency Positioning
27/ Emergency Planning
28-29/ Photometry Basics
30/ Light Level Recommendations
31/ Data Centre for Lighting
32/ LED Module Guide
33/ Fluorescent Lamp Guide
34-37/ Lighting Glossary
39/ Ingress & Impact Protection

In creating a dynamic and visually stimulating lighting scheme there are a
number of factors to consider:
• The client design brief
• The tasks to be carried out in the space
• How the space will be used
• The persons using the space
• The type of lighting; should it be direct, indirect or both
• Feature lighting
• Perimeter lighting
• Ceiling heights & void restrictions. Certain luminaires may
not suit a low ceiling
• Building services, including any beams, air conditioning
units etc.
• Ceiling heights
• Interior finishes and design
• Furniture layout
• Lighting control, presence & daylight detectors
• Consult lighting guides
CIBSE SLL Code for Lighting
CIBSE SLL Lighting Handbook
Building Regulations Part L
Carbon Trust
British Council for Offices Guide to Lighting
• Energy efficiency
• Exterior lighting
• Emergency lighting needs
Where information is limited, best practised
assumptions can be made by the lighting
designer e.g. Using standard reflectances,
typical positioning of task areas etc.
LightingDesignConsiderations
12
futuredesigns.co.uk

LIGHTINGGUIDE
GLOS
Luminaire Symbol Image
GLOS
GLOS
LINEAR
SLEAK
VANE
SHEER
BEEM185SB
BEEMRD196
BEEMRD130
BEEMSQ150
POD450
VIVID
Office space with 600mm x
600mm GLOS or EXEMPLAR.
Up to 3m x 3m Spacing to
achieve 300-500lx on the
working plane.
Corridor space with
BEEMRD185SB 2.4m or 3m
spacing to achieve 100lx at
floor.
Toilets with BEEMRD196 in
each cubicle & BEEMRD130
over the sinks. Main washroom
area 1.2 to 2.4m spacing to
achieve 200lux.
Breakout / dining space. Make
the space interesting using
a combination of fixtures to
highlight focal areas. VANE,
HUB & BEEMRD100 to achieve
200-300lux at task area.
Reception spaces can be zoned
using lighting to create a focus
over the reception desk and
general lighting in the waiting
area. SHEER, BEEMSQ &
BEEMRD130 to achieve 200lux
in the main area and 300lx over
the desk
Meeting rooms can be
illuminated using downlighters
troughout (BEEMRD185SB)
or use a feature suspended
luminaire like SLEAK with
accent downlighters
Meeting rooms and
cellular spaces can be
lit using a variety of
designs.
For cellular spaces
using modular or
linear fittings like
GLOS or EXEMPLAR
spaced betwen
1.8m and 3m apart.
with perimeter
BEEMRD130
downlights for accent
lighting. To achieve
300-500lx
Meeting rooms
can be illuminated
using downlighters
thoughout the space
(BEEMRD185SB)
or use a feature
suspended luminaire
like SLEAK with
accent downlighters.
To achieve 300-500lx
Accent lights can be
spaced from 1.8m to
3m
A quick reference guide to lighting a space and the products to use along with the light levels required.
LightPlanningQuickReference
13
futuredesigns.co.uk

Direct Lighting
Can be recessed, surface, floor mounted or suspended.
Lighting directly on to the task or area.
Direct/Indirect Lighting
Can be recessed, floor, wall mounted or suspended.
Lighting directly on to the task or area along with uplighting to illuminate ceilings and
walls. This light is indirectly bounced back into the space creating an airy feel.
Indirect Lighting
Suspended & floor mounted lighting.
Light is directed onto the ceiling and walls then reflected back into the space.
THIS LIGHTING GUIDE IS FOR INFORMATION ONLY AND AS SUCH FUTURE DESIGNS WILL NOT BE HELD RESPONSIBLE FOR ANY ERRORS CONTAINED THEREIN.
LuminaireTypes
14
futuredesigns.co.uk

LIGHTINGGUIDE
As part of BS EN
12464-1:2011 the guide
wants us to look at
how lighting interacts
with the space and the
persons within.
As the way we work
changes, lighting
has to adapt. Face to
face communication,
video conferencing,
hot desking and
collaborative spaces
require lighting for
visual communication
and good facial
modelling.
These can be checked
by looking at the
Cylindrical Illuminance
and Horizontal Task
Lighting.
Cylindrical Illuminance
Cylindrical illuminance measures the
vertical illuminance, the amount of
light falling on a persons face. The
recommendation is a mean Cylindrical
Illuminance of 150lux with a uniformity
of 0.1 at standing (1.6m) and sitting
(1.2m).
Task Illuminance
Lighting for task is an energy efficient way of lighting a
space and thus eliminating wasteful light.
The task area is often seen as the computer screen on a
typical desk of 1.5m x 0.75m. The actual task may occur
anywhere on this surface.
Tasks should be lit to between 300 and 500lux (minimum
300lux for computer based tasks).
The Immediate Surround area is an area at least 0.5m
around the task. If the desking layout is unknown then
the Immediate Surround areas should not be less than
300lux.
Background Area is the area 3m around the Immediate
Surround Area. Here we are looking at levels a third of
the Task/Immediate Surround Area.
0.5m
3m
Mean cylindrical illuminance
(Vertical Illuminance) is the
measurement of light around
the face at sitting (1.2m) or
standing 1.6m)
Background Area
Immediate Surround
Horizontal Illuminance
Task Area (the computer)
LightingPeople&Tasks
15
futuredesigns.co.uk

Lighting Control
Building Regulations require
luminaires to be efficient. Utilising
lighting controls can aid in saving
energy and reducing carbon
emissions.
• Dimming
• Presence detectors
• Absence detection
• Localised control
• Daylight linking
• Power Over Ethernet
Ceilings 70%-90% Reflectance
Walls 50%-80% Reflectance
Floor
20%-40% Reflectance
Furniture
20%-70%
Reflectance
Recommended illuminance levels for surfaces.
It is recommended that these figures are exceeded.
Ceiling 50lux
Uniformity › 10%
Walls 75lux
Uniformity › 10%
Standard reflectances for office space
Ceilings & Wall Illuminance
As part of the lighting design, looking at the levels on the walls
and ceilings is important in providing a visually comfortable
space to work in as well as creating a brighter environment.
Perimeter Lighting
This is an area which can benefit
from big energy savings. Using
daylight linked lighting control
systems energy consumption
can be reduced. Using LED
downlighters provide a good
lighting solution to enhancing these
areas yet not over lighting them.
Lighting Definitions
Lumens (also known as flux) is the light emitted
from a light source or luminaire.
Illuminance is the amount of light that falls onto
a surface measured in lux.
Luminance is the intensity of the light reflected
from a surface measured in Candelas (cd/sqm).
Glare
Glare can be defined as Discomfort Glare where it causes
discomfort but does not impair vision of objects or Disability
Glare where it impairs the vision of objects without causing
discomfort.
Glare can be checked using the UGR table (see photometry
basics) and by checking the candela values of the luminaire.
Average luminance limits of luminaires, which can be
reflected onto Flat screens (BS EN12464-1)
High luminance
screen
Medium
luminance
screen
Positive Polarity
Normal requirements
≤ 3000cd/sqm ≤ 1500cd/m²
Negative Polarity
Higher requirements
such as CAD and
colour inspection
≤ 1500cd/sqm ≤ 1000cd/m²
Illum
inance
Lum
inance
Colour temperature BS EN 12464-1
Warm Below 3000K
Intermediate 3300-5300K
4000K typically used for CAT A
Office (also known as cool white)
Cool 5300K+
TechnicalConsiderations
16
futuredesigns.co.uk

LIGHTINGGUIDE
The main types of LED chip
Chip on board Technology
COB
Surface mounted Device
SMD
Primary Use
Downlighters, spotlights,
Track lighting
Primary Use
Modular Office Luminaire,
Slot lights, Industrial
luminaires.
Suitable Areas
Office, retail, Hospitality,
Reception, Circulation, Accent
lighting
Suitable Areas
Office, Education, Hospitals
& Healthcare, Industrial
Areas
Rated Life -Life-time, lumen maintenance and
failure rate
The light output of an LED Module decreases
over the life-time, this is characterised with the
L value.
L70 means that the LED module will give 70%
of its initial luminous flux. This value is always
related to the number of operation hours and
therefore defines the lifetime of an LED module.
The F value is the combination degradation and
complete failures, e.g. L70F10 means 10 % of
the LED modules may fail or be below 70 % of
the initial luminous flux.
LED Terminology Description Notes
Rated Luminous
flux
The light emitted from the
luminaire.
Expressed in lumens
LED Life Illustrated as lumen
depreciation over time (L)
and failure rate (F)
IES LM-80-08. Approved
Method: Measuring Lumen
Maintenance of LED Light
Sources.
CRI Colour Rendering Index. A
measure of the ability of the
light source to reveal the
colours of an object/surface.
For most installations CRI 80
or above
Colour Stability Colour Binning Measured as MacAdam Steps
(SDCM).
CCT Correlated Colour
Temperature. Colour
temperature is a
characteristic of visible light
Classification of colour
expressed in Kelvin e.g.
4000K
Thermal
Management
LEDs do not radiate heat
but need to be thermally
managed.
Heat sink design and
temperature testing to
prevent damage or early
degradation to the diode.
Efficacy Efficacy of the product and
of the LED
This details how efficient the
product is and is required
by ECA (Enhanced Capital
Allowance Scheme) and Part
L of the Building Regulations
Power factor Expressed as mA This is the current the
luminaire is running at.
The lower the current the
less power the luminaire
consumes
CELMA Guide Apples & Pears give an in depth guide into LED standards &
Performance
High
efficiency
luminaire LED
Heatsink
LED Luminaire Properties
Colour Rendering
The MacAdam chromaticity diagram
allows us to understand colour by
clarifying what the colour is and how
different colours are.
For office lighting we look at the
white spectrum. The MacAdam
ellipse allows LEDs to be binned
(categorised) by performance.
Most LEDs are binned at 3
MacAdam steps. 4-7 MacAdam
steps would mean the end user
would see a colour difference.
LED linear / area
4.2 Lumen maintenance for Umodule STARK QLE
Forward
current
tp
temperature
L90 / F10 L90 / F50 L80 / F10 L80 / F50 L70 / F10 L70 / F50
250 mA
45 °C 53,000 h >60,000 h >60,000 h >60,000 h >60,000 h >60,000 h
65 °C 26,000 h 39,000 h 55,000 h >60,000 h >60,000 h >60,000 h
300 mA
45 °C 52,000 h >60,000 h >60,000 h >60,000 h >60,000 h >60,000 h
65 °C 26,000 h 38,000 h 54,000 h >60,000 h >60,000 h >60,000 h
3.5 EOS/ESD safety guidelines
The device / module contains components that are sensitive to electro-
static discharge and may only be installed in the factory and on site if
appropriate EOS/ESD protection measures have been taken. No special
measures need be taken for devices/modules with enclosed casings
(contact with the pc board not possible), just normal installation prac-
tice. Please note the requirements set out in the document EOS / ESD
guidelines (Guideline_EOS_ESD.pdf) at:
http://www.tridonic.com/esd-protection
Chemical substance may harm the LED module. Chemical reactions
could lead to colour shift, reduced luminous flux or a total failure of the
module caused by corrosion of electrical connections.
Materials which are used in LED applications (e.g. sealings, adhesives)
must not produce dissolver gas. They must not be condensation curing
based, acetate curing based or contain sulfur, chlorine or phthalate.
Avoid corrosive atmosphere during usage and storage.
3.4 Mounting instruction
None of the components of the umodule STARK QLE (substrate, LED,
electronic components etc.) may be exposed to tensile or compressive
stresses.
Max. torque for fixing: 0.5Nm.
The LED modules are mounted with 4 screws per module.
In order not to damage the modules only rounded head screws and an
additional plastic flat washer should be used.
4.1 Life-time, lumen maintenance and failure rate
The light output of an LED Module decreases over the life-time, this is characterized
with the L value.
L70 means that the LED module will give 70 % of its initial luminous flux. This value
is always related to the number of operation hours and therefore defines the life-
time of an LED module.
As the L value is a statistical value and the lumen maintenace may vary over the
delivered LED modules.
The B value defines the amount of modules which are below the specific L value,
e.g. L70B10 means 10 % of the LED modules are below 70 % of the inital luminous
flux, respectivly 90 % will be above 70 % of the initial value. In addition the percent-
age of failed modules (fatal failure) is characterized by the C value.
The F value is the combination of the B and C value. That means for F degradation
and complete failures are considered, e.g. L70F10 means 10 % of the LED modules
may fail or be below 70 % of the initial luminous flux.
4. Life-time3.3 Wiring type and cross section
The wiring can be in stranded wires with ferrules or solid with a cross section of 0.2
to 0.75mm².
For the push-wire connection you have to strip the insulation (8–9mm).
8 – 9 mm
wire preparation:
0.2 – 0.75 mm²
To remove the wires use a suitabel tool (e.g. Microcon release pin) or through
twist and pull .
CIE Chromaticity Diagram
LEDSpecification
Zhaga are a global lighting-industry
organisation that is standardising
LED light engines and associated
components. This helps to simplify LED
luminaire design and manufacturing, and
to accelerate the adoption of LED lighting
solutions.
17
futuredesigns.co.uk

Reduced Cost
Upgraded Quality of Design
Safety
High Efficiency
Longer
Maintenance
Cycles
Ability to Offer
Extremely
Long Life
Environmentally
Inexpensive to
Manufacture
Low
Forward
Heat
Solid State
i.e. no gasses
No Mercury
No UV/IR
Radiation
Directional
Light
Source
Compact
Dimensions
100 %
Light Level
from Start Up
High Light
Levels / Low Power
Consumption
LED offers:
• Homogeneous light
• Directional LED light distribution
leads to increased LOR
• No lamp imaging
• Cost effective
• Low power consumption and in turn
lower Watts/m²
• Reduced maintenance
• Reduced install points
• Payback can in 3 years
• Works with intelligent lighting
systems
•
• LEDs are solid state lighting, robust
in construction when compared to a
fluorescent tube
• Warranty of 5 years
• High resistance to switching cycles
• High impact and vibration resistant
• The biggest breakthrough in lighting
since the fluorescent lamp
BenefitsofLED
18
futuredesigns.co.uk

LIGHTINGGUIDE
PLL LED
10
30
40
50
60
Power Consumption
PLL LED
50
100
130
170
200
Carbon Emissions over 5 years
PLL LED
5000
Comparable Lumen Outputs
4000
3000
2000
1000
Typical commercial workspace using GLOS Luminaire
Existing PLL
Installation
LED Option
Light source 1X55W PLL 4x7.8W LED
Luminaire quantity 320 256
Total power 17,600W 7,987W
Watts/m² 8.19W/m² 3.93W/m²
Average illuminance 443lux 473lux
Hours of use 12hrs per day 12hrs per day
CO2 produced 34.5 tonnes p.a 14.8 tonnes p.a
Total lamp wattage 55 31.2
Total circuit wattage 60 34.8
Total lamp lumens 4800lm 5000lm
Lamp efficacy 80lm/W 169lm/W
Lifetime
Years of operation
(based on 12hr day)
14,000hrs
4.5years
50,000hrs
16years
Lamp efficacy Increase from PLL to LED 112%
Lamp life increase from PLL to LED 257%
11.5 year increase
Reduction in energy consumption when
switching to LED
53%
Carbon saving in switching to LED 53%
Making 471,348,886 photocopies
Running an average car for
399,802 kilometres. The
equivalent of 10 times around the
world
Making 9,479,430 cups of tea
Toasting 10,831,655 slices of bread
Printing 1,310,527,725 A4 sheets
Microwaving 3,617,631 meals
99 tonnes of CO2 saved over 5 years. This equates to:
53%
Saving
CaseStudy-ModularPLLtoLED
19
futuredesigns.co.uk

T5 LED
10
30
50
60
70
Power Consumption
T5 LED
50
100
120
150
200
Carbon emissions over 5 years
T5 LED
5000
4000
3000
2000
1000
Typical commercial workspace using GLOS LINEAR LED Luminaire
Existing T5
Installation
LED Option
Light source 2x28W T5 4x9.5W LED
Watts/m² 8.63W/m² 4.72W/m²
Total circuit wattage 62.1 35.4
Lifetime
Years of operation
(based on 12hr day)
19,000hrs
6years
50,000hrs
16years
Lamp efficacy Increase from T5 to LED 80%
Lamp life increase from T5 to LED 163%
6 year increase
switching to LED
45%
Making 418,084,081 photocopies
equivalent of 8.8 times around
the world
Microwaving 3,208,8204
meals
45%
Saving
CaseStudy-LinearT5toLED
CaseStudy-LinearT5toLED
20
futuredesigns.co.uk

LIGHTINGGUIDE
T8 LED
10
30
50
60
90
Power Consumption
T8 LED
60
120
180
240
300
Carbon Emissions over 5 years
T8 LED
5000
4000
3000
2000
1000
Typical commercial workspace using EXEMPLAR-LED Luminaire
Existing T8
Installation
LED Option
Light source 4x18W T8 4x7.8W LED
Watts/m² 14.93W/m² 3.93W/m²
Total circuit wattage 86 35.4
Lifetime
Years of operation
(based on 12hr day)
12,000hrs
3.8years
50,000hrs
16years
Lamp efficacy Increase from T8 to LED 231%
Lamp life increase from T8 to LED 317%
12.2 year increase
switching to LED
74%
Making 1,178,074,647 photocopies
equivalent of 25 times around the
world
Microwaving 9,041,794 meals
74%
Saving
CaseStudy-ModularT8toLED
21
futuredesigns.co.uk

POE - Power Over Ethernet
Lighting has undergone a revolution. LED is at
the forefront of lighting technology providing
excellent lighting with great energy efficiency.
With this change are vast improvements in
luminaire and optic design. However one area
has remained the same which is the electrical
services infrastructure.
Power Over Ethernet allows for luminaires
to be harmonised within the ICT system in
conjunction with other services such as data
telephony, CCTV and BMS. This eliminates
the need for final circuits for lighting and
lighting control which reduces initial capital
expenditure due to the reduction in the
amount of cabling within the ceiling void.
The Benefits
• Easy lighting management
• Network supervision
• Energy management
• User zone definition
• Power usage mapping
• Integration of other systems and
services
• Simpler installation with less cabling
infrastructure
• DALI compatible
• Automated one button addressing of
DALI ballasts
• Support for emergency lighting
Our team can help with your requirements.
POELightingControl
22
futuredesigns.co.uk

LIGHTINGGUIDE
Enhanced Capital Allowance &
Efficacy
LEDs enable luminaires to be
extremely efficient. The ECA
(Enhance Capital Allowance) Scheme
allows for projects to be given a tax
rebate by ensuring the most energy
efficient luminaires are utilised.
The document ‘Energy Technology
Criteria List’ gives an insight into
these efficiencies.
LEED
LEED, or Leadership in Energy &
Environmental Design, is a green
building certification program that
recognises best-in-class building
Enhanced Capital Allowance Scheme (ECA)
Category
Minimum Luminaire
efficacy
(luminaire lumens/
Circuit W)
Amenity Accent & Display ≥ 75
General indoor lighting
(Direct Lighting)
≥ 82
(Uplighting)
≥ 100
(Indirect/Direct)
≥ 100-(18 x DLOR/LOR)
Exterior area & floodlighting ≥ 82
strategies and practices. To receive
LEED certification, building projects
must satisfy prerequisites and earn
points to achieve different levels of
certification.
BREEAM
BREEAM is the world’s foremost
environmental assessment method
and rating system for buildings.
BREEAM sets the standard for
best practice in sustainable
building design, construction and
operation and has become one of
the most comprehensive and widely
recognised measures of a building’s
environmental performance.
ECA,LEED,BREEAM&Efficacies
23
futuredesigns.co.uk

EMERGENCY TESTING
• Self-contained - a functional test should be carried out to ascertain that all luminaires are
working in the correct manner, i.e. Maintained, non-maintained and, where appropriate,
combined. It should be verified that the battery-charging supply is present and indicated, and
that the luminaires operate in emergency mode on simulation of a general supply failure.
• Central systems - the system should be tested in normal and emergency modes to determine
the correct changeover of luminaires and full functionality in emergency mode. With central
systems, it is essential that a full duration test is carried out.
• Automatic testing and remote testing systems - the system should be set-up and tested for
functioning in accordance with the suppliers’ instructions. A copy of these instructions should
be placed with the log book.
EmergencyLighting
An emergency escape lighting design needs to
consider:
• The escape route, including en-route exits and
final exits for both interior and exterior.
• Areas with high risk tasks.
• Access areas.
• Occupational hours especially for offices,
hospitals etc.
• Consideration must also be taken when looking
at the type of emergency lighting to be provided
and to ensure they meet with EN and BS
regulations.
Escape lighting can be provided as either:
NON MAINTAINED: The escape lighting operates
when the normal mains supply fails.
MAINTAINED: Where the lighting operates normally
and continues to operate when the normal mains
supply fails (mains lighting and escape lighting).
An escape lighting design should:
• Provide 3 hours of lighting for escape
• Provide adequate visual terms and directions
for safe evacuation on escape routes
• Consider fire alarm call points, fire fighting
equipment and safety equipment to be identified
• Allow hazards (e.g. stairs, intersections, slopes)
and hazardous processes to be identified and
made safe during evacuation.
• Provide at positions where a visual task has
to be performed prior to evacuation or where
people have to pass by these dangers along the
escape route in the high risk areas.
• Be based on the minimum light output condition
of the luminaire and should be based on direct
light only.
Signs available for use in an emergency, are clearly
signposted and are visible at all material times and
should be illuminated by both the normal and the
emergency lighting systems.
The style and details of the safety signs are defined
in BS 5499. BS ISO 3864 gives the internationally
agreed formats of exit signs and safe condition
signs.
Area Design illuminance / light level
Escape route Minimum design value of 1 lx on the floor along the centre line (CL) of
the route with 0.5 lx on the floor of the centre band (CB) of at least 50%
of the route width.
Open escape area Minimum design value of 0.5 lx on central core empty floor excluding
0.5m wide perimeter band
Fixed seated area Minimum design value of 0.1 lx on a plane 1m above floor/pitch-line over
seated areas. Gangways should be treated as clearly defined routes
High risk task area Minimum 10% of maintained illuminance on the reference plane but at
least 15 lx
Areas requiring
emergency
lighting due to
risk assessment
Kitchens 15 lx at the working plane
First aid rooms 15 lx at the working plane
Treatment rooms 50 lx at the working plane
Refuge areas for people with impaired
mobility
5 lx at the working plane
Plant rooms, switch rooms and emergency
winding facilities for lifts
15 lx in plane of visual task
Fire control and indicating equipment 15 lx in plane of visual task
Reception area (sufficient illumination to
call fire brigade)
15 lx in plane of visual task
Crash bars or security devices at exit doors 5 lx in plane of visual task
Swimming pool surrounds 5 lx in plane of visual task
Escape lighting is aimed to ensure that people are protected from the effects of
normal lighting supply failure and provided with sufficient illumination to be able
to locate escape routes and use them safely.
THIS LIGHTING GUIDE IS FOR INFORMATION ONLY AND AS SUCH FUTURE DESIGNS WILL NOT BE HELD RESPONSIBLE FOR ANY ERRORS CONTAINED THEREIN.24
futuredesigns.co.uk

LIGHTINGGUIDE
Fire Alarm Call Point
Change of Direction
Exterior lighting leading
evacuees away from
final exit
Final
Exit
Lift
Plant Room
Change of Level
Exinguishers
Intersection
Toilet
Exceeding 8sq/m or
without borrowed light
Fire Escape
Exit Signs
Emergency Luminaire
Exterior Emergency
Luminaire
EmergencyPositioning
Ideal locations to site emergency luminaires
• At each exit door intended for use in an emergency
• Near stairs so that each flight of stairs receives direct light
• Near any change in level
• At mandatory emergency exits and safety signs
• At each change of direction
• At each intersection of corridors
• Near each final exit and outside the building to a place of safety
• Near each first aid post
• Near each piece of fire fighting equipment and call point
25
futuredesigns.co.uk

LIGHTINGGUIDE
EmergencyPlanning
Open Area
The part of emergency escape lighting provided to avoid
panic and provide illumination allowing people to reach a
place where an escape route can be identified.
Large areas (generally greater than 60 square metres)
through which escape may be hazardous (or generate
panic).
0.5 Lux minimum anywhere in the area except the 0.5 metre
band around the perimeter.
Escape Route
Lighting provided to ensure that the means of escape can
be effectively identified and safely used when a location is
occupied.
Lighting of defined escape routes; corridors, stairways, fire
stairs etc.
1 lux minimum on the centre line and the central band
(not less than half total width) to be illuminated
High Risk Lighting
Emergency lighting provided to ensure the safety of people
involved in a potentially dangerous process or situation and
to enable proper shut down procedures for the safety of
the operator and other occupants of the premises. Tasks
that may require a shut down procedure before evacuation
(rotating machines, acid baths etc.)
The task area must be lit to 10% of the normal illuminance
for as long as the risk exists.
Illuminance must be achieve in 0.5 seconds.
ESCAPE LIGHTING
That part of emergency
lighting provided to enable
safe exit in the event of failure.
EMERGENCY LIGHTING
The lighting provided for use when the supply to the normal
mains lighting fails
STANDBY LIGHTING
That part of emergency
lighting provided to enable
normal activities in the event
of failure of the normal mains
supply.
27
futuredesigns.co.uk

Luminaire data
FUTURE Designs Limited, LATERUL (LAT-235/T5/HFDI/UL/MP/WS)
LDC
Object
Installation
Project number
Date
: FUTURE Designs Limited
:
:
: 29.09.2015
50
100
150
200
250
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 149 149 149
10° 249 263 242
20° 244 241 242
30° 211 228 218
40° 190 221 188
50° 113 122 115
60° 58 63 56
70° 32 33 32
80° 15 16 15
90° 1 1 1
100° 5 2 6
110° 18 17 19
120° 37 11 36
130° 53 6 55
140° 69 18 68
150° 78 39 78
160° 83 61 91
170° 93 86 90
180° 99 99 99
cd / 1000 lm
C0 / C180 C90 / C270
Manufacturer : FUTURE Designs Limited
Order number : LAT-235/T5/HFDI/UL/MP/WS
Luminaire name : LATERUL
Equipment : 2 x 35W T5 / 3300 lm
Dimensions : L 271 mm x W 2385 mm x H 59 mm
File name : LAT-235-T5-HFDI-UL-MP-WS.ldt
Efficiency factor : 76.61%
Luminaire efficacy : 68.33 lm/W (B53)
Light distribution
Beam Angle
: sym. to C0-C180
: -- C90-C270
-- C0
-- C180
PhotometryBasics FUTURE Designs Limited, EXEMPLAR/LED (EXEMPLAR5K4KFMP250)
LDC
Object
Installation
Project number
Date
: Buiding 3 Guildford Business Park FD8751
: Reception
: FD8751
: 28.09.2015
This calculation is for guidance only, and as such Future Designs will not be held responsible for any errors contained therein.
FUTURE Designs Limited, T: 01732 867420, E: info@futuredesigns
Relux1
200
400
600
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 606 606 606
5° 606 595 598
10° 596 588 591
15° 575 559 567
20° 545 535 528
25° 508 486 489
30° 465 438 441
35° 402 366 369
40° 310 276 264
45° 206 199 178
50° 145 136 129
55° 98 93 86
60° 77 72 67
65° 59 56 54
70° 46 43 41
75° 34 32 29
80° 23 22 19
85° 11 11 8
90° 2 0 0
cd / 1000 lm
C0 / C180 C90 / C270
Order number : EXEMPLAR5K4KFMP250
Luminaire name : EXEMPLAR/LED
Equipment : 1 x LED (250mA) / 2977.87 lm
File name : EXEMPLAR-LED-5K-4K-FMP-250.ldt
Efficiency factor : 100%
Luminaire efficacy : 84.12 lm/W (A50)
Light distribution
Beam Angle
: asymmetric
: 40.1° C0
38.3° C90
38.0° C180
39.2° C270
1 Luminaire data
1.1 FUTURE Designs Limited, BEEM/RD/195/CG (BEEM/RD/195/1100/CG)
1.1.1 LDC
Object
Installation
Project number
Date
: Reception
: FD8751
: 28.09.2015
Page 2/7Relux1
100
200
300
400
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 471 471 471
5° 477 472 477
10° 466 466 466
15° 451 450 451
20° 426 427 426
25° 399 398 399
30° 362 362 362
35° 322 322 322
40° 279 279 279
45° 214 214 214
50° 136 135 136
55° 62 62 62
60° 17 17 17
65° 9 9 9
70° 5 5 5
75° 3 3 3
80° 1 1 1
85° 0 0 0
90° 0 0 0
cd / 1000 lm
C0 / C180 C90 / C270
Order number : BEEM/RD/195/1100/CG
Luminaire name : BEEM/RD/195/CG
Equipment : 1 x LED / 1100 lm
Dimensions : D 190 mm x H 0.0 mm
File name : BEEM-RD-195-1100-CG.ldt
Light distribution
Beam Angle
: sym. to C0-C180 / C90-C270
: 86.4° C0-C180
86.4° C90-C270
Photometric data describes the behaviour of a
luminaire and is presented in a standard format
which describes how a luminaire ‘lights’, and
how it compares with other similar fittings.
Photometric data can be supplied as a diagram
which can be interpreted in such a way that
is possible to work out which luminaires are
suitable for specific installations.
The photometric properties of a luminaire can
be accurately measured in several different
ways, lighting engineers have developed precise
terms to describe each of these:
Luminous Flux:
The light emitted by a light source, this is
measured in LUMENS.
Luminous Intensity:
This is the light travelling in any direction and is
measured in CANDELAS.
Illuminance:
The luminous flux density on a surface. This is
measured in LUX.
Testing
Luminaires are tested as either Absolute or
Relative Photometry.
Relative photometry is where the light output
ratio is adjusted for luminaire losses.
LED luminaires are generally tested are
absolute photometry under the guidance
of IESNA LM-79-08. This means that the
luminaires are tested at 100% light output
with the lumen value is adjusted as it exits the
luminaire.
Photometric data files are supplied in LDT or
IES formats to be used in lighting programs
such as Relux or Dialux.
For square or linear luminaires, two polar curves are given;
transverse, across the luminaire (solid red curve), and axial,
along the luminaire (dotted red curve). These planes detail
the light distribution of the luminaire.
For a symmetrical luminaire, such as a downlight, only one
curve is given which shows the average distribution from
several planes around the fitting.
Polar curves are a graphical representative of light distributed from a luminaire. The curve provides
information about the amount of light, spread and the intensity of the light.
The information presented within this table is the numerical
form of the data in the polar diagram. Distribution is measured
in planes, if a luminaire is symmetrical then the information
is presented using C0 plane only. If a luminaire is square or
rectangular additional planes are added to reflect the shape.
90°
Axial
270°
0°
180°
Transverse
Measurement Angles
Axial CurveUplight Area
Transverse Curve
28
futuredesigns.co.uk

LIGHTINGGUIDE
PhotometryBasics
FUTURE Designs Limited, EXEMPLAR/LED (EXEMPLAR5K4KFMP250)
Glare Rating (UGR)
Relux1
Reflectance of
Ceiling 0.7 0.7 0.5 0.5 0.3 0.7 0.7 0.5 0.5 0.3
Walls 0.5 0.3 0.5 0.3 0.3 0.5 0.3 0.5 0.3 0.3
Floor Cavity 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2
Room dimension Viewed crosswise Viewed endwise
x y
2H 2H 13.1 14.5 13.5 14.8 15.1 13.0 14.3 13.3 14.6 15.0
3H 13.8 15.0 14.1 15.3 15.7 13.8 15.0 14.2 15.4 15.7
4H 14.1 15.2 14.5 15.6 16.0 14.2 15.4 14.6 15.8 16.1
6H 14.5 15.5 14.9 15.9 16.3 14.7 15.8 15.1 16.1 16.5
8H 14.6 15.6 15.0 16.0 16.4 14.8 15.8 15.2 16.2 16.6
12H 14.7 15.7 15.1 16.1 16.5 14.9 15.9 15.3 16.3 16.7
4H 2H 13.4 14.5 13.8 14.9 15.2 13.2 14.4 13.6 14.7 15.1
3H 14.1 15.1 14.5 15.5 15.9 14.3 15.2 14.7 15.6 16.0
4H 14.6 15.4 15.0 15.8 16.3 14.9 15.8 15.4 16.2 16.6
6H 15.0 15.8 15.5 16.2 16.7 15.5 16.2 15.9 16.7 17.1
8H 15.3 16.0 15.8 16.4 16.9 15.7 16.4 16.2 16.8 17.3
12H 15.5 16.1 16.0 16.6 17.1 15.9 16.5 16.3 16.9 17.5
8H 4H 14.8 15.5 15.3 15.9 16.4 15.1 15.8 15.6 16.3 16.7
6H 15.4 16.0 15.9 16.5 17.0 15.8 16.4 16.3 16.8 17.3
8H 15.8 16.3 16.3 16.8 17.3 16.1 16.6 16.7 17.2 17.7
12H 16.1 16.5 16.7 17.1 17.6 16.4 16.8 16.9 17.3 17.8
12H 4H 14.8 15.5 15.3 15.9 16.4 15.1 15.8 15.6 16.2 16.7
6H 15.5 16.0 16.0 16.5 17.0 15.9 16.4 16.4 16.9 17.4
8H 15.9 16.4 16.5 16.9 17.4 16.2 16.7 16.8 17.2 17.7
Distance between luminaires: 0.25
Due to missing symmetry characteristics the values apply only to the indicated line of sight.
Luminaire name : EXEMPLAR/LED
Equipment : 1 x LED (250mA) / 2977.87 lm
File name : EXEMPLAR-LED-5K-4K-FMP-250.ldt
Light distribution
Beam Angle
: asymmetric
: 40.1° C0
38.3° C90
38.0° C180
39.2° C270
FUTURE Designs Limited, EXEMPLAR/LED (EXEMPLAR5K4KFMP250)
Luminance chart
Object
Installation
Project number
Date
: Reception
: FD8751
: 28.09.2015
C0 C15 C30 C45 C60 C75 C90 C105 C120 C135 C150 C165
65°
70°
75°
80°
85°
[1132]
1078
1059
1066
921
965
658
409
775
1032
974
537
673
947
983
1070
1034
983
1005
881
1110
1078
1081
952
854
1065
1062
1056
981
904
1070
1018
985
990
979
1104
1036
1070
955
926
1055
987
1019
894
894
1008
1008
983
1050
831
915
961
908
883
834
933
902
878
945
790
C180 C195 C210 C225 C240 C255 C270 C285 C300 C315 C330 C345
65°
70°
75°
80°
85°
1029
981
903
867
722
984
930
915
966
910
1051
926
942
1029
989
1007
987
977
995
945
1094
1020
953
971
779
1071
1122
1037
1038
850
1100
1015
1025
1018
937
1082
1002
1053
1038
815
1072
1096
1028
946
908
1076
1017
989
1070
924
1023
974
1061
1043
903
992
1028
995
1033
1069
Luminance [cd/m²]
Glare tables detail the glare rating based on typical room sizes and
reflectances. When the photometric file is used within a lighting calculation,
glare can be checked to see it falls in line with CIBSE SLL recommendations.
Luminance tables enables checks to be made on the brightness of the
luminaire at 65degree and above. This can be checked against luminance
requirements for screens.
29
futuredesigns.co.uk

Area Lux Glare Uniformity
Colour
Rendering
Traffic zones inside buildings
Circulation areas and corridors 100 28 0.40 40
Stairs, escalators, travelators 100 25 0.40 40
Elevators, lifts 100 25
0.40
40
Loading ramps/bays 150 25 0.40 40
General areas inside buildings
Canteens, pantries 200 22 0.40 80
Rest Rooms 100 22 0.40 80
Rooms for physical exercise 300 22 0.40 80
Cloakrooms, washrooms,
bathrooms, toilets
200 25 0.40 80
Sick bay 500 19 0.60 80
Rooms for medical attention 500 16 0.60 90
Entrance halls 100 22 0.40 80
Cloakrooms 200 25 0.40 80
Lounges 200 22 0.40 80
General ares inside buildings - Control rooms
Plant rooms, switch gear
rooms
200 25 0.40 60
Telex, post room, switchboard 500 19 0.60 80
General areas inside buildings - Store rooms, cold stores
Stores and stockrooms 100 25 0.40 60
Dispatch packing handling
areas
300 25 0.60 60
General areas inside buildings - Storage rack areas
Gangways: unmanned 20 - 0.40 40
Gangways: manned 150 22 0.40 60
Control stations 150 22 0.60 80
Storage rack face 200 - 0.40 60
Places of public assembly - Restaurants and hotels
Reception/cashier desk,
porters
300 22 0.60 80
Kitchen 500 22 0.60 80
Restaurant, dining room,
function
- - - 80
Self-service restaurant 200 22 0.40 80
Buffet 300 22 0.60 80
Retail premises
Sales area 300 22 0.40 80
Till area 500 19 0.60 80
Wrapper table 200 19 0.60 80
Colour
Rendering
Music practice rooms 300 19 0.60 80
Language laboratory 300 19 0.60 80
Computer practice rooms 300 19 0.60 80
Preparation rooms &
workshops
500 22 0.60 80
Entrance Halls 200 22 0.40 80
Circulation areas, corridors 100 25 0.40 80
Stairs 150 25 0.40 80
Student common rooms &
assembly halls
200 22 0.40 80
Teachers rooms 300 19 0.60 80
Stock rooms for teaching
materials
100 25 0.40 80
Sports halls, gymnasiums,
swimming pools
300 22 0.60 80
School canteens 200 22 0.40 80
Kitchen 500 22 0.60 80
Health care premises - Rooms for general use & Staff
Waiting rooms 200 22 0.40 80
Corridors: during the day 100 22 0.40 80
Corridors: cleaning 100 22 0.40 80
Corridors: during the night 50 22 0.40 80
Corridors - multi-purpose use 200 22 0.60 80
Day rooms 200 22 0.60 80
Elevators, lifts for persons and
visitors
100 22 0.60 80
Service lifts 200 22 0.60 80
Staff office 500 19 0.60 80
Staff rooms 300 19 0.60 80
Health care premises - Wards
General lighting 100 19 0.40 80
Reading lighting 300 19 0.70 80
Simple examinations 300 19 0.60 80
Examination and treatment 1000 19 0.70 90
Night & observation lighting 5 - - 80
Patients Bathrooms & toilets 200 22 0.40 80
Health care premises - Examination rooms (general)
General lighting 500 19 0.60 90
Examination and treatment 1000 19 0.70 90
Colour
Rendering
Office Space
Conference and meeting
rooms
300-
500
19 0.60 80
Writing, typing, reading, data 300 19 0.60 80
Filing, copying, etc. 500 19 0.40 80
Technical drawing 750 16 0.70 80
CAD work stations 500 19 0.60 80
Reception 200 22 0.60 80
Reception Desk 300 22 0.60 80
Places of public assembly - Libraries
Bookshelves 200 19 0.40 80
Library: reading areas 500 19 0.60 80
Reading area 500 19 0.60 80
Counters 500 19 0.60 80
Places of public assembly - Public car parks (indoor)
In/out ramps (during the day) 300 25 0.40 40
In/out ramps (at night) 75 25 0.40 40
Traffic lanes 75 25 0.40 40
Parking areas 75 - 0.40 40
Ticket office 300 19 0.60 80
Educational premises - Nursery school, play school
Play room 300 22 0.40 80
Nursery 300 22 0.40 80
Handicraft room 300 19 0.60 80
Educational premises - Educational buildings
Classrooms, tutorial rooms 300 19 0.60 80
Classroom for evening classes
and adults education
500 19 0.60 80
Auditorium, lecture halls 500 19 0.60 80
Black, green and white boards 500 19 0.70 80
Demonstration table 500 19 0.70 80
Art rooms 500 19 0.60 80
Art rooms in art schools 750 19 0.70 90
Technical drawing rooms 750 16 0.70 80
Practical rooms & laboratories 500 19 0.60 80
Handicraft rooms 500 19 0.60 80
Teaching workshop 500 19 0.60 80
LightLevelRecommendations
30
futuredesigns.co.uk

LIGHTINGGUIDE
Data Centre lighting is designed in line with the Telecommunications
Industry Association’s TIA-942.
The standard uses 3 levels to assess lighting.
• Level 1: When nobody is scheduled to be in the data centre
space, the lighting level should be just high enough that security
personnel (stationed outside the unoccupied data centre spaces)
can monitor the space with surveillance cameras.
• Level 2: Motion detectors should automatically initiate a higher
level of lighting once access is detected.
• The level of lighting should be high enough to clearly permit
identification via security cameras. These motion sensors can
also replace a manually-switched lighting control system.
• Level 3: Lighting should be a minimum of 500 lux min the
horizontal plane and 200 lux in the vertical plane, measured
1m above the finished floor in the middle of all aisles between
cabinets and at 1m on the vertical surface of the cabinet.
DataCentreLighting
31
futuredesigns.co.uk

LED Wattage Lumen
Colour
Temperature
Other Information
LED Linear Board 2.1W 330lm 3000K 140mm For general &
supplementary
lighting. For
professional &
semi professional
environments.
Suitable for
offices, shops,
schools, public
buildings.
340lm 4000K
4.3W 640lm 3000K 280mm
660lm 4000K
710lm 5000K
8.6W 1280lm 3000K 560mm
1320lm 4000K
2.6W 380lm 3000K 140mm
400lm 4000K
5.2W 740lm 3000K 280mm
760lm 4000K
830lm 5000K
10.5W 1480lm 3000K 560mm
1530lm 4000K
3.1W 430lm 3000K 140mm
450lm 4000K
6.2W 840lm 3000K 280mm
870lm 4000K
940lm 5000K
12.4W 1680lm 3000K 560mm
1740lm 4000K
LED Board 7.8W 1210lm 3000K 270mm For general &
supplementary
lighting. For
professional &
semi professional
environments.
Suitable for
offices, shops,
schools, public
buildings.
1250lm 4000K
1300lm 5000K
1210lm 3000K 250mm
1250lm 4000K
9.5W 1430lm 3000K 270mm
1480lm 4000K
1540lm 5000K
1430lm 3000K 250mm
1480lm 4000K
11.3W 1670lm 3000K 270mm
1730lm 4000K
1790lm 5000K
1670lm 3000K 250mm
1730lm 4000K
LED Wattage Lumen Colour
Temperature
Approx.
Dimensions
Other Information
Flexible LED Tape 4.3 W/m 510lm/m 3000K 8mm x
4.8m
For accent,
creative and
pelmet lighting.
Suitable for
incorporation into
joinery details.
4000K
8.9 W/m 1020lm/m 3000K
4000K
13.8 W/m 1530lm/m 3000K
4000K
LED Spot Board 7.5W 930lm 3000K 80mm For general and
accent lighting.
Restaurant,
office, circulation
and perimeter
lighting.
1020lm 4000K
14.9W 1860lm 3000K
2040lm 4000K
LED Spot Board 17.7W 1980lm 3000K 120mm
4000K
22.1W 2480lm 3000K
4000K
LED Spot Module 15.2W 2000lm 3000K 50mm
13.7W 4000K
23.1W 3000lm 3000K
20.6W 4000K
42.7W 5000lm 3000K
37.8W 4000K
LEDModuleGuide
32
futuredesigns.co.uk

LIGHTINGGUIDE
Benefits
• 10% less energy use
• Up to €30 savings on your energy bill and up to 90 kg
less CO2
emission over the lifetime per lamp*
• No compromise on the quality of light
• Easy to design into existing luminaires
• Optimised for various applications
• Short payback time for your customer of just 1 year
• An entirely lead-free solution with the lowest mercury
content in its category (only 1.4 mg mercury, 100%
lead free)
Save 10% energy and up to €30 per lamp
It’s a simple switch that could save up to €30 over
the lifetime of each lamp*, so they’re better for the
environment and your customer’s bank balance too.
Now you can design energy efficiency into your
luminaires without compromising on quality of light.
The new MASTER TL5 Eco lamps from Phillips use a
unique mixture of filling gases and more energy efficient
phosphors to save 10% in energy use.
Easy to design into luminaires
The MASTER TL5 Eco range maximises savings with the
minimum of investment. No complex changes to your
luminaires are required making up-lamping easier than
ever before. The lamps can also be normally dimmed like
all other TL5 lamps and/or operated on intelligent gear.
Optimised for various applications
The MASTER TL5 Eco is suitable for a wide range of
applications and can be used anywhere our standard
TL5 lamps are used. Temperature sensitivity is equal
to normal TL5 lamps (see Phi-T curve). With current-
controlled gear you can expect a reduction in energy
consumption of 10% (or a 10% increase in light on
powercontrolled alternatives).
“ I made the switch and helped my customers
save money and the environment ”
Now you can design-in
energy savings
Philips MASTER TL5 Eco reduces energy use
by 10% without reducing light quality
* Based on TL5 HO Eco (73W), €0.15/kWhr and 0.44 kg CO2
/kWhr.
NEW
34Pagina4
Survey_OEM.QXD 11-02-2005 08:34 Pagina 5
Survey_OEM.QXD11-02-200508:34Pagina5
NEW
NEW
NEW
NEW
NEW
Benefits
• 10% less energy use
• Up to €30 savings on your energy bill and up to 90 kg
less CO2
emission over the lifetime per lamp*
• No compromise on the quality of light
• Easy to design into existing luminaires
• Optimised for various applications
• Short payback time for your customer of just 1 year
• An entirely lead-free solution with the lowest mercury
content in its category (only 1.4 mg mercury, 100%
lead free)
Save 10% energy and up to €30 per lamp
It’s a simple switch that could save up to €30 over
the lifetime of each lamp*, so they’re better for the
environment and your customer’s bank balance too.
Now you can design energy efficiency into your
luminaires without compromising on quality of light.
The new MASTER TL5 Eco lamps from Phillips use a
unique mixture of filling gases and more energy efficient
phosphors to save 10% in energy use.
Easy to design into luminaires
The MASTER TL5 Eco range maximises savings with the
minimum of investment. No complex changes to your
luminaires are required making up-lamping easier than
ever before. The lamps can also be normally dimmed like
all other TL5 lamps and/or operated on intelligent gear.
Optimised for various applications
The MASTER TL5 Eco is suitable for a wide range of
applications and can be used anywhere our standard
TL5 lamps are used. Temperature sensitivity is equal
to normal TL5 lamps (see Phi-T curve). With current-
controlled gear you can expect a reduction in energy
consumption of 10% (or a 10% increase in light on
powercontrolled alternatives).
“ I made the switch and helped my customers
save money and the environment ”
Now you can design-in
energy savings
Philips MASTER TL5 Eco reduces energy use
by 10% without reducing light quality
* Based on TL5 HO Eco (73W), €0.15/kWhr and 0.44 kg CO2
/kWhr.
Lamp Wattage Lumen Approx.
Length
Cap Colour
Temperature
Other Information
High efficiency T5
ECO
13W 1100lm 600mm G5 3000K / 4000K /
6500K
T5 ECO lamps
reduce energy
by approximately
10% without
reducing light
quality.
19W 1800lm 900lm
25W 2600lm 1200mm
32W 3650lm 1500mm
High output T5 ECO 20W 1650lm 1200mm G5 3000K / 4000K /
6500K
34W 3500lm 900mm
45W 4100lm 1500mm
50W 4450lm 1200mm
73W 7000lm 1500mm
High efficiency T5 14W 1200lm 600mm G5 2700K / 3000K
3500K / 4000K
5000K / 6500K
For general &
supplementary
lighting. For
professional &
semi professional
environments.
Suitable for
offices, shops,
schools, public
buildings.
21W 1900lm 900mm
28W 2600lm 1200mm
35W 3300lm 1500mm
High output T5 24W 1750lm 600mm G5 2700K / 3000K
3500K / 4000K
5000K / 6500K
39W 3100lm 900mm
49W 4300lm 1500mm
54W 4450lm 1200mm
80W 6150lm 1500mm
T8 Lamps 18W 1350lm 600mm G13 2700K / 3000K
4000K
36W 3500lm 1200mm
58W 5240lm 1500mm
Circular T5 22W 1800lm Ø231mm 2GX13 2700K / 3000K
4000K
Ideal for offices,
public areas,
shops and not
traditional
layouts.
40W 3300lm Ø306mm
55W 4200lm Ø306mm
60W 5000lm Ø381mm
Compact Fluorescent Lamps
PL-L 18W 1200lm 280mm 2G11 2700K / 3000K
3500K / 4000K
5000K / 6500K
Suitable for
lighting in offices,
hotels, receptions
and task lighting
24W 1800lm 320mm
36W 2900lm 420mm
40W 3500lm 540mm
55W 4800lm 540mm
80W 6000lm 570mm
Lamp Wattage Lumen Approx.
Length
Cap Colour
Temperature
Other Information
PL-T (2 pin) 13W 900lm 115mm GX24d-1 2700K / 3000K
3500K
For general &
supplementary
use.
18W 1200lm 120mm GX24d-2
26W 1800lm 135mm GX24d-3
PL-T (4 pin) 18W 1200lm 125mm G24q-2 2700K / 3000K
4000K
For general &
supplementary
lighting. For
professional &
semi professional
environments.
26W 1800lm 135mm G24q-3
32W 2400lm 140mm G24q-3
42W 3200lm 160mm G24q-4
57W 4300lm 200mm G24q-5
PL-C (2 pin) 10W 600lm 120mm G24d-1 2700K / 3000K
4000K
For general &
supplementary
lighting.
13W 900lm 140mm G24d-1
18W 1200lm 155mm G24d-2
26W 1800lm 175mm G24d-3
PL-C (4 pin) 10W 600lm 110mm G24q-1 2700K / 3000K
4000K
For general &
supplementary
lighting.
13W 900lm 135mm G24q-2
18W 1200lm 145mm G24q-3
26W 1800lm 165mm G24q-4
PL-S (2 pin) 5W 250lm 105mm G23 2700K / 3000K
4000K
For general &
supplementary
lighting. For
professional &
semi professional
environments.
7W 400lm 115mm
9W 600lm 170mm
11W 900lm 240mm
PL-S (4 pin) 5W 250lm 100mm 2G7 2700K / 3000K
4000K
7W 400lm 120mm
9W 600lm 155mm
11W 900lm 220mm
PL-H 60W 4000lm 190mm 2GB-1 3000K / 4000K Indoor and
outdoor
applications.
85W 6000lm 225mm
120W 9000lm 300mm
PL-Q (2 pin) 16W 1050lm 145mm GRB 2700K / 3000K
3500K
Corridor,
stairwell &
reception areas
28W 2050lm 210mm
PL-Q (4 pin) 16W 1050lm 145mm GR10q 2700K / 3000K
3500K
28W 2050lm 210mm
38W 2850lm 210mm
FluorescentLampGuide
33
futuredesigns.co.uk

ACCENT LIGHTING
Directional lighting used to draw attention
or place emphasis on a particular area or
object.
AMBIENT LIGHTING
The general lighting within a space
including daylight. Task and Accent
lighting are not included.
AMERICAN NATIONAL STANDARDS
INSTITUTE (ANSI)
A nonprofit organisation that develops
voluntary consensus standards and
conformity assessment systems for
products, services, processes, systems,
and personnel in the United States.
AMPERE (AMP)
The unit for measuring rate of flow of
electrical current: Current (Amps) = Power
(Watts) / Voltage (Volts).
ANALOGUE 1-10 VOLT DIMMABLE
1-10V DC input controls the light level.
AVERAGE ILLUMINANCE
Illuminance averaged over the total area.
BCO BRITISH COUNCIL FOR OFFICE
The British Council for Offices’ (BCO)
mission is to research, develop and
communicate best practice in all aspects
of the office sector.
BEAM ANGLE OR BEAM SPREAD
The total angle of the directed beam
in degrees. Used to describe the light
emitting from a reflectorised lamp or
downlighter.
BIN (BINNING)
The dividing of performance parameters
(Flux, Wavelength / colour) in to small
groups.
BREEAM (BUILDING RESEARCH
ESTABLISHMENT ENVIRONMENTAL
ASSESSMENT METHODOLOGY)
An energy rating standard that sets the bar
for best practice in sustainable building
design, construction and operation.
BREEAM has become one of the most
comprehensive and widely recognised
measures of a building’s environmental
performance.
BRIGHTNESS
To describe screen brightness in a display
or television.
BULB
These grow in the ground and usually
flower in spring.
CASE TEMPERATURE
The temperature measured at the LED
driver package or case.
CANDELA (cd)
The measure of luminous intensity of a
source in a given direction
CHROMATICITY
An objective specification of the quality of a
colour, independent of its luminance, and
as determined by its or saturation and hue.
CIBSE (CHARTERED INSTITUTE OF
BUILDING SERVICE ENGINEERS)
The Chartered Institute of Building
Services Engineers (CIBSE) is the prime
source of expertise in the Building
Services industry.
CIE CHROMATICITY DIAGRAM
A colour space created by the International
Commission on Illumination (CIE) in 1931
to define the entire gamut of colours
visible to the average viewer.
COLOUR DEFINITION
The colour of uniformly illuminated objects
described using three terms:
Hue: Describes the situation when the
appearance of different colours is similar
Lightness: Describes a range of greyness
between black and white.
Chroma: Is the colourfulness relative to
the brightness
COLOUR GAMUT
The range of colours within the CIE
Chromaticity Diagram included when
combining different sources.
COLOUR RENDERING
A general expression for the effect of a
light source on the colour appearance of
objects.
COLOUR RENDERING INDEX (CRI)
A measure of the degree of colour shift
objects undergo when illuminated by the
light source as compared with those same
objects when illuminated by a reference
source of comparable colour temperature.
The reference source has a CRI of 100.
CONNECTED LOAD
The total sum of the wattages.
CONTRAST
The difference in the luminance of an
object and its surrounding or between two
objects.
COOL WHITE (CW)
A description of a range of correlated
colour temperatures. Generally 4000K.
CORRELATED COLOUR TEMPERATURE
(CCT)
A specification of the colour appearance
of the light emitted by a lamp, defined in
Kelvin (K).
DALI (DIGITAL ADDRESSABLE LIGHTING
INTERFACE)
A digital communications protocol for
controlling and dimming lighting fixtures,
originally developed in Europe.
DAYLIGHT HARVESTING
Lighting design which uses daylight to
reduce energy consumption.
DAYLIGHT FACTOR
Ratio of the illuminance at point on a given
plane directly from the sky.
DELIVERED LIGHT
The amount of light a lighting fixture or
lighting installation delivers to a target
area or task surface, measured in foot
candles (fc) or lux (lx).
DIFFUSE LIGHT
Luminaires which produce a soft light.
DIFFUSER
An object with irregularities on a surface
causing scattered distribution.
DIODE
Chip: light emitting semiconductor.
DIRECT LIGHTING
Lighting by a luminaire projecting light
straight onto the working plane.
DIRECTIONAL LIGHTING
Where the lighting of a plane or object is
from a particular direction.
DIRECTIONAL LIGHT SOURCE
A light source that emits light only in the
direction it is pointed or orientated.
DISABILITY GLARE
A degradation of visual performance
caused by a reduction of contrast on a VDU
screen.
LightingGlossary
34
futuredesigns.co.uk

LIGHTINGGUIDE
DISCOMFORT GLARE
Glare that may impair vision whilst causing
discomfort.
DMX
A digital communications protocol for
controlling lighting fixtures, originally
developed to control stage lighting.
DRIVER
Electronics used to power illumination
sources. LED drivers are available as
constant current, constant voltage,
dimming and non-dimming.
EFFICACY
The light output of a light source divided
by the total electrical power input to that
source, expressed in lumens per Watt
(lm/W).
ELUMDAT (EUROPEAN LUMEN DATA)
A file produced by a photometric test which
describes the behaviour of a luminaire
within a lighting calculation program.
EMERGENCY LIGHTING
Lighting which is provided in the event of a
mains failure.
ESCAPE LIGHTING
Emergency lighting provided to show the
escape route.
ESTIDAMA
Estidama is a building design methodology
for constructing and operating buildings
and communities more sustainable,
primarily used in the Gulf region.
FLOODLIGHTING
Wide distribution lighting of an object or
building by flood lights or projectors.
FLUX / LUMINOUS FLUX
Luminous flux is the measure of the
perceived power of light, adjusted to
reflect the varying sensitivity of the human
eye to different wavelengths of light
FORWARD VOLTAGE
LEDs are current driven devices. If an
external current is passed through the
device, a forward voltage will be developed
across the diode.
FREEDOM FROM BINNING
Describes the case where the entire
production of white LEDs can be
described by a single CCT and within a
declared number of MacAdam ellipses.
No subdivision or colour binning of the
LEDs is required for use in the intended
application.
GENERAL LIGHTING
Lighting throughout a space with no
localised requirements.
GLARE
Reduction in the ability to see objects
causing discomfort. Glare caused by high
contrasts or incorrect luminance limits.
GONIOPHOTOMETER
A photometric device for testing the
luminous intensity distribution, efficiency,
and luminous flux of luminaires.
HEAT SINK
A part of the thermal system that
conducts or convects heat away from
sensitive components, such as LEDs and
electronics.
HIGH FREQUENCY
A range of high specification electronic
ballasts exceeding the performance crite-
ria of the European norms.
INDIRECT LIGHTING
Lighting emitted from a luminaire that is
indirectly illuminating the working plane.
ILLUMINANCE
The intensity of light falling on a surface
area. If the area is measured in square
feet, the unit of illuminance is foot candles
(fc). If measured in square meters, the unit
of illuminance is lux (lx).
ILLUMINATING ENGINEERING SOCIETY OF
NORTH AMERICA (IESNA)
The recognised technical authority in
the US on illumination, communicating
information on all aspects of good lighting
practice to its members, to the lighting
community, and to consumers through
a variety of programs, publications, and
services.
JUNCTION TEMPERATURE
Junction temperature, noted as Tj, is the
temperature of the LED’s active region.
KELVIN (TEMPERATURE)
KELVIN (K) used to indicate the compara-
tive colour appearance of a light source
when compared to a theoretical blackbody.
Yellowish incandescent lamps are 2700K.
Fluorescent and LED light sources range
from 3000K to 6500K and higher.
MAINTENANCE CYCLE
Lamp replacement, luminaire and room
surface cleaning cycle.
MAINTAINED ILLUMINANCE
Value in which the average illuminance
should not fall below.
MODELLING
The balance between diffuse and
directional light to improve or enhance a
space and objects, people, finishes within.
ORGANIC LIGHT-EMITTING DIODES
(OLED)
Organic light-emitting diodes (OLEDs)
are based on organic (carbon based)
materials. In contrast to LEDs, which are
small point sources, OLEDs are made in
sheets which provide a diffuse area light
source. OLED technology is developing
rapidly and is increasingly used in display
applications such as cell phones and PDA
screens. However, OLEDs are still some
years away from becoming a practical
general illumination source. Additional
advancements are needed in light output,
colour, efficiency, cost, and lifetime.
PHOSPHOR
A coating of phosphorescent material
which photons from a royal blue LED pass
through causing those photons to exit with
a different colour property.
PLANCKIAN BLACK BODY LOCUS
The line on the CIE Chromaticity Diagram
that describes the color temperature of an
object when heated from approximately
1,000K to more than 10,000K.
POLAR CURVE (Luminous Intensity
Distribution)
The polar curve is a graphical
representation of the distribution of
intensity of a luminaire and indicates the
directions in which light is projected.
POWER FACTOR
The active power divided by the apparent
power (i.e., Product of the rms input
voltage and rms input current of a driver).
POWER FACTOR CORRECTION
In an electronic device, such as an LED
lighting fixture, a system of inductors,
capacitors, or voltage converters to adjust
the power factor of electronic devices
toward the ideal power factor of 1.0.
LIGHT OUTPUT RATIO (LOR)
The ratio of the total light emitted by a
luminaire (light fitting) to the total light
output of the lamp or lamps it contains. It
is always less than 1.
LUMEN (lm)
The international (SI) unit of luminous flux
or quantity of light emitted by a source.
LUMEN DEPRECIATION
Describes the percentage of light lost
relative to the initial lumen output.
LUMEN MAINTENANCE
The luminous flux at a give time in the
life of the LED. This is expressed as a
percentage of the initial luminous flux.
LUMEN MAINTENANCE CURVE
A graph illustrating the predicted average
light output behaviour over time of a single
LED or solution.
LUMEN OUTPUT
The total lumens emitted of a light source.
LUMINAIRE
A lighting fixture providing artificial light,
supplied complete with light source and
other accessories. As an example a lu-
minaire can be recessed, suspended, free
standing, wall or surface mounted.
LUMINANCE
The intensity of light in a given direction
from a surface. The unit is candelas per
sq.m (cd/m²)
LUMINAIRE EFFICACY
The output of a light source divided by the
total electrical power and efficiency of the
luminaire. Expressed in luminaire lumens
per Watt (ll/W).
LUMINOUS INTENSITY
The luminous flux in a given direction.
The unit is the candela (one lumen per
steradian).
LUX
The standard unit of illuminance of a
surface being lit. One lux is one lumen per
square metre.
MACADAM ELLIPSE
A MacAdam ellipse is the region on a
chromaticity diagram which contains all
colours which are indistinguishable, to the
average human eye, from the colour at the
centre of the ellipse.
LEADING EDGE DIMMER
A type of dimmer that regulates power to
lamps by delaying the leading edge of each
half-cycle of AC power. Compatible with
many LED fixtures.
LED - See LIGHT EMITTING DIODE.
LED ARRAY/MODULE/ENGINE
An assembly of LED packages or diodes
on a printed circuit board, possibly with
optical elements and additional thermal,
mechanical and electrical interfaces.
LED CHIP
The light producing semiconductor device.
LED LUMINAIRE
A complete lighting unit consisting of
LED-based light emitting elements and
a matched driver together with parts to
distribute light.
LEED (LEADERSHIP IN ENERGY &
ENVIRONMENTAL DESIGN)
LEED is an internationally recognised
green building certification system,
providing third-party verification that
shows strategies intended to improve
performance
LIFE CYCLE COSTING
A technique to establish the total cost of
ownership. It is a structured approach that
addresses all the elements of this cost and
can be used to produce a spend profile of
the product or service over its anticipated
life-span.
LIGHT EMITTING DIODE (LED)
A Light Emitting Diode (LED) is a solid-
state semiconductor device that converts
electrical energy directly into light. On
its most basic level, the semiconductor
comprises of two regions: the p-region
contains positive electrical charges while
the n-region contains negative electrical
charges. When voltage is applied and
current begins to flow, the electrons move
across the n region into the p region. The
process of an electron moving through
the p-n junction releases energy. The
dispersion of this energy produces photons
with visible wavelengths.
LIGHT METER
Device used to measure light in situ. Cali-
brated in lux or foot candles.
LIGHT OUTPUT
The total lumens emitted from a luminaire.
LightingGlossary
35
futuredesigns.co.uk

TUNABLE WHITE LIGHT
White-light LED fixtures that combine
channels of warm white and cool white
LEDs to produce a range of colour
temperatures.
UGR (UNIFIED GLARE RATING)
Unit for assessing glare.
UNIFORMITY RATIO
The ratio for the minimum illuminance to
the average illuminance over an area.
ULTRAVIOLET (UV)
Electromagnetic radiation with wavelength
shorter than that of visible light.
UPLIGHT
Luminaires that emit light upwards.
USEFUL LIFE
The amount of light a lighting fixture
delivers in an application, minus any
wasted light.
VEILING REFLECTIONS
Reflections that appear on an object (e.g. A
computer screen) that obscures details.
VOLT
The term used to describe the electrical
potential difference between oppositely
charged conductors, for example there is a
1.5V potential between the top and bottom
of an AAA battery.
WALL WASHER
Luminaire with a reflector or lens
designed to wash light on to wall. Located
parallel to the wall.
WARM WHITE (WW)
A description of light with a correlated
colour temperature between 3000K and
3500K, usually perceived a slightly yellow.
WATT (W)
The unit of electrical power as used by an
electrical device during its operation. Many
lamps come with rating in watts to indicate
their power consumption.
WORKING PLANE / REFERENCE PLANE
Surface in which illuminance is measured
e.g. Desk height. The plane can be hori-
zontal, vertical or inclined.
SPECTRAL LUMINOUS EFFICIENCY
FUNCTION
A bell-shaped curve describing the
sensitivity of a human eye with normal
vision to the spectrum of visible light. Also
known as the eye-sensitivity curve.
SPOTLIGHT
Luminaire with direct light distribution
which can be aimed at a specific object
or area.
STANDARD DEVIATION OF COLOUR
MATCHING (SDCM)
Describes the difference between two
colours. A difference of one to three
SDCM “steps” is virtually imperceptible,
a difference of four SDCM steps is just
noticeable, and a difference of more than
four SDCM steps is readily visible.
STERADIAN
The standard unit of solid angle. Describes
two-dimensional angular spans in three-
dimensional space.
SUBTRACTIVE COLOUR MODEL
A colour model that applies to reflective
surfaces such as paints, dyes, and inks.
Combining red, green, and blue in equal
amounts produces black.
TASK LIGHTING
Light source used to illuminate a task
area. These can be lighting local to the
area.
THERMAL MANAGEMENT
Controlling the operating temperature
of the product through design, examples
includes heat sinks and improved airflow.
THERMAL RESISTANCE (K/W)
The property of a material’s ability to
conduct heat.
TRAILING EDGE DIMMER
A type of dimmer that regulates power to
lamps by delaying the end of each half-
cycle of AC power. Compatible with many
LED fixtures.
TRACK LIGHTING
A versatile lighting system using luminaire
spotlights that can be added or removed.
Generally used in retail.
TRANSMITTANCE
Ratio of the luminous flux transmitted
through a body to the luminous flux on it.
RADIANT FLUX
The total energy emitted by a light source
across all wavelengths, measured in watts.
REFLECTANCE
A measure of how much light a surface
will reflect expressed as a %.
REFLECTOR
Part of a luminaire designed to reflect,
guide and distribute light in a specific way.
ROOM INDEX
A means of representing the proportions
of a room to be used in interior lighting
design calculations. (Length x width) /
(length + width) x height of lamp above
working plane.
REMOTE PHOSPHOR
A phosphor conversion technique in
which photons from a royal blue LED pass
through a phosphor material that is not
attached to the LED chip.
RGB COLOUR MODEL
An additive colour model in which red,
green, and blue light are added together
in different proportions to produce a broad
range of colours, including white.
RGB WHITE
A method of producing white light by
combining the output from red, green, and
blue LEDs.
SAFETY LIGHTING
Lighting & emergency lighting for high
risk tasks.
SDCM - See standard deviation of colour
matching.
SMDs
Surface-mount LEDs.
SOLID-STATE LIGHTING
A description of the devices that do
not contain moving parts or parts that
can break, rupture, shatter, leak or
contaminate the environment.
SPACING TO HEIGHT RATIO
Published figure for a given luminaire
for the permissible maximum centre-to-
centre spacing of luminaires in relation
to their mounting height* to maintain
acceptable uniformity of illuminance on
the working plane.
*(Measured between the luminaire and the
working plane).
LightingGlossary
36
futuredesigns.co.uk

LIGHTINGGUIDE
37
futuredesigns.co.uk

THIS LIGHTING GUIDE IS FOR INFORMATION ONLY AND AS SUCH FUTURE DESIGNS WILL NOT BE HELD RESPONSIBLE FOR ANY ERRORS CONTAINED THEREIN.38
futuredesigns.co.uk

LIGHTINGGUIDE
A two digit number is used to provide an IP Rating to
a piece of electronic equipment or to an enclosure for
electronic equipment.
The two digits represent two different forms of
environmental influence.
THE FIRST NUMERAL
Represents protection against ingress of solid objects
THE SECOND NUMERAL
Represents protection against ingress of liquids
An IP44 rated product would have ingress protection
against solid objects greater than 1mm and is
protected against splashing water.
1st
Numeral
Description Definition
0 Non protected No special protection
1 Protected
against solid
objects greater
than 50mm
A large surface of the
body such as a hand
(but no protection
against deliberate
access. Solid objects
exceeding 50mm.
2 Protected
against solid
objects greater
than 12mm
Fingers or similar
objects not exceeding
80mm in length.
Solid objects
exceeding 12mm in
diameter.
3 Protected
against solid
objects greater
than 2.5mm
Tools, wires etc. Of
diameter or thickness
no greater than
2.5mm. Solid objects
exceeding 2.5mm in
diameter.
4 Protected
against solid
objects greater
than 1mm
Wires or strips of
thickness greater
than 1mm. Solid ob-
jects exceeding 1mm
in diameter.
5 Dust Protected Limited protection
against ingress of
dust
6 Dust-tight Totally protected
against ingress of
dust.
2nd
Numeral
Description Definition
0 Non protected No special protection
1 Protected against
dripping water.
Dripping water (verti-
cally falling drops)
shall have no harmful
effect.
2 Protected against
dripping water
when tilted up to
15°.
Dripping water (verti-
cally falling drops)
shall have no harm-
ful effect when the
enclosure is tilted at
15° from its normal
position.
3 Protected against
spraying water.
Water falling as a
spray at an angle of
60° from the vertical
effect.
4 Protected against
splashing water.
Water splashing
against the enclosure
from any direction
effect.
5 Protected against
water jets.
Water projected by
a nozzle against the
enclosure from any
direction shall have
no harmful effect.
6 Protected
against powerful
water jets. Ideal
protection against
heavy seas.
Powerful water jets
from heavy seas
shall not enter the
enclosure in harmful
quantities.
7 Protected against
the effects of
immersion of pres-
sure and time.
Ingress of water in
a harmful quantity
shall not be possible
when the enclosure
is immersed in water
under defined condi-
tions.
8 Protected against
the effects of sub-
mersion of pres-
sure and time.
Ingress of water in a
harmful quantity shall
not be possible when
the enclosure is sub-
mersed in water for
long periods under
pressure.
Number Measure of
protection -
impact energy
(joules)
Test
00 No protection to
this standard
No protection
to this standard
01 0.15 0.20kg impact
02 0.20 0.20kg impact
03 0.35 0.20kg impact
04 0.50 0.20kg impact
05 0.70 0.20kg impact
06 1.00 0.50kg impact
from 200mm
07 2.00 0.50kg impact
from 400mm
08 5.00 1.70kg impact
from 295mm
09 10.00 5.00kg impact
from 200mm
10 20.00 5.00kg impact
from 400mm
When higher impact energy protection is
required 50 joules is recommended
IK Rating system is an International
classification showing degrees of protection
provided by luminaires against external
mechanical impacts.
Degree of Impact Protection EN62262.
Ingress&ImpactRatings
39
futuredesigns.co.uk

RECESSED
RECESSED
42/ GLOS
49/ GLOS LINEAR
54/ EXEMPLAR
59/ AXCEL
62/ EXEMPLAR LINEAR
68/ VANE/R
74/ EDGE
77/ SEEL
78/ BEL
82/ ELED
83/ EXIT

42
LED
Recessed
Depth
105mm
Min 65mm
Available with
750mm
Tile
Nominal
Size
600mm x
600mm
Nominal
Size
500mm x
500mm
Part L2

ECA

BUILT
IN
BRITAIN
PHOTOMET-
RIC
GLOS’ minimalist form compliments any workspace or environment
with its design based on a homogeneous light across its surface. The
architecture of the space is illuminated perfectly, so it’s not just the
light, but the space that shines through. GLOS is highly efficient and can
give huge savings in energy, installation, costs and installation points
whilst providing perfect lighting for all workplace demands. It’s simple
in its design which means it’s simple to install.
• Excellent rendering of light on
walls & ceiling
• Microprism or polar frost diffuser
• Range of lumen outputs
• Air handling
• To suit concealed & exposed ceiling
grids
• Integrated emergency
• Links with lighting control
systems & power over ethernet
• Part L & Enhanced Capital
Allowance
• Low and easy maintenance
• Replaceable LED modules
• Long life 50,000hrs
FMP ET
Product GLOS
Lumen Options
(600mm x 600mm) Nominal dimension
4000lm
4000K LED
5000lm
4000K LED
6000lm
4000K LED
6900lm
4000K LED
3900lm
3000K LED
4900lm
3000K LED
5800lm
3000K LED
6600lm
3000K LED
Lumen Options
4000lm
4000K LED
5000lm
4000K LED
3700lm
3000K LED
4600lm
3000K LED
Control Gear ND
Non dimming
HA
Analogue dimming
HD
DALI dimming-
HS
Switch dimming
HX
DSI dimming
Diffuser Option ET
Polar frost
FMP
Microprism
Options X3
Air handling
X6
Shallow void
X7
750mm Tile
X16
Power Over
Ethernet
Emergency Options E3
3 hour integrated self
contained conversion kit
with green LED indicator
EA
Self test emergency
EC
Central battery
emergency
ED
DALI emergency
EE
Emergency via independent ELED
Nominal Size 5
500mm x 500mm
6
600mm x 600mm
Technical details Designed to suit concealed &
exposed grids
Supported as either lay in or on
side arm brackets
CRI>80 LED Efficacy 168 lm/W
50.000hrs
IP Rating
IP20
Please contact our technical department for the most up-to-date information on LED modules
To Specify: 600mm x 600mm luminaire to suit 5000lumen cool white LED, DALI digital dimming control
gear and polar frost diffuser. Catalogue No GLOS5K4KHDET6 LumEdit
GLOS-LED-2904-3K-O-150 Polar Diagram
04.08.15 / 13:07 1/1
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
LumEdit
EXEMPLAR-4K-4K-FMP-200mA-LIN12 Polar Diagram
04.08.15 / 13:36 1/1
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
GLOS
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

RECESSED
43
futuredesigns.co.uk

RECESSED
45
futuredesigns.co.uk

RECESSED
GLOS
47
futuredesigns.co.uk

RECESSED
LED
Recessed
Depth
105mm
Min 65mm
Nominal
Size
1500mm x
300mm
Nominal
Size
1200mm x
300mm
Nominal
Size
900mm x
300mm
Part L2

ECA

BUILT
IN
BRITAIN
49
GLOS’ minimalist form compliments any workspace or environment
with its design based on a fluid light across its surface. The
architecture of the space is illuminated perfectly, so it’s not just the
light, but the space that shines through. GLOS is highly efficient and can
give huge savings in energy, installation, costs and installation points
whilst providing perfect lighting for all work place demands. Its simple
in its design which means it’s simple to install
walls & ceiling
• Air handling
grids
Allowance
Product GLOS
Lumen Options
(1200mm x 300mm) Nominal dimen-
sion
Suffix LIN
4000lm
4000K LED
5000lm
4000K LED
6000lm
4000K LED
6900lm
4000K LED
3900lm
3000K LED
4900lm
3000K LED
5800lm
3000K LED
6600lm
3000K LED
Lumen Options
sion
Suffix LIN
5000lm
4000K LED
6300lm
4000K LED
7500lm
4000K LED
8600lm
4000K LED
4900lm
3000K LED
6100lm
3000K LED
7300lm
3000K LED
8300lm
3000K LED
Lumen Options
Suffix LIN
3000lm
4000K LED
3800lm
4000K LED
4500lm
4000K LED
5200lm
4000K LED
2900lm
3000K LED
3700lm
3000K LED
4300lm
3000K LED
5000lm
3000K LED
Control Gear ND
Non dimming
HA
Analogue dimming
HD
DALI dimming
HS
Switch dimming
HX
DSI dimming
Diffuser Option ET
Polar frost
FMP
Microprism
Options X1
Special size
X3
Air handling
X6
Shallow Void
X16
Power Over
Ethernet
EA
Self test emergency
EC
Central battery
emergency
ED
DALI emergency
EE
Emergency via ELED
EP
EM-Pro emergency
Nominal Sizes LIN9
300 x 900mm
LIN12
300 x 1200mm
LIN15
300 x 1500mm
Technical Details Designed to suit concealed &
exposed grids
side arm brackets
50.000hrs
IP Rating
IP20
gear and polar frost diffuser. Catalogue No GLOS5K4KHDETLIN12
FMP ET
LumEdit
GLOS-LED-3000-4K-ET-150-LIN Polar Diagram
04.08.15 / 13:40 1/1
50
100
150
200
250
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
LumEdit
GLOS-4K-4K-FMP-200mA-LIN12 Polar Diagram
11.08.15 / 15:21 1/1
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
GLOS
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

RECESSED
51
futuredesigns.co.uk

RECESSED
53
GLOS
GLOS linear with BEEM
SQ downlights at each
end. The luminaire
can incorporate air
handling, PIR sensors and
emergency units.
futuredesigns.co.uk

54
EXEMPLAR is at the forefront of workplace lighting. Its design produces
fluid light across its surface which produces a light that gives incredible
illuminance on the working areas, walls and ceilings resulting in a
fresh, light space that is a pleasure to be in. EXEMPLAR is a person
centred luminaire perfect for general lighting, face to face meetings and
conference calling. It’s simple in its design which means it’s simple to
install. The high performance means installation points can be reduced
whilst maintaining excellent light levels. This high performance also
benefits energy saving and carbon reduction.
walls & ceiling
• Air handling
grids
Allowance
Product EXEMPLAR
Lumen Options
4000lm
4000K LED
5000lm
4000K LED
6000lm
4000K LED
6900lm
4000K LED
3900lm
3000K LED
4900lm
3000K LED
5800lm
3000K LED
6600lm
3000K LED
Lumen Options
5000lm
4000K LED
4000lm
4000K LED
4600lm
3000K LED
3700lm
3000K LED
Control Gear ND
Non dimming
HA
Analogue dimming
HD
DALI dimming
HS
Switch dimming
HX
DSI dimming
Diffuser Option ET
Polar frost
FMP
Microprism
Options X3
Air handling
X6
Shallow void
X7
750mm Tile
X16
Power Over
Ethernet
EA
Self test emergency
EC
Central battery
emergency
ED
DALI emergency
EE
Nominal Size 5
500mm x 500mm
6
600mm x 600mm
exposed grids
side arm brackets
50.000hrs
IP Rating
IP20
gear and polar frost diffuser. Catalogue No EXEMPLAR5K4KHDET
LED
Recessed
Depth
105mm
Min 65mm
Available with
750mm
Tile
Nominal
Size
600mm x
600mm
Nominal
Size
500mm x
500mm
Part L2

ECA

BUILT
IN
BRITAIN
LumEdit
EXEMPLAR-LED-4160-5K-O-200 Polar Diagram
04.08.15 / 13:06 1/1
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
LumEdit
04.08.15 / 13:36 1/1
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
FMP ET
EXEMPLAR
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

RECESSED
55
futuredesigns.co.uk

RECESSED
57
futuredesigns.co.uk

RECESSED
59
Evolved through design, AXCEL creates beautifully lit working
environments, expertly illuminating people, working areas and rooms.
AXCEL’s unique design based on an angled front face provides fluid light
across its surface thus giving a uniform light source, perfect for general
lighting, face to face meetings and conference calling. It’s simple in its
design which means it’s simple to install. The high performance means
installation points can be reduced whilst maintaining excellent light
levels. This high performance also benefits energy saving and carbon
reduction.
• Lenses allow improved rendering of
light on walls & ceiling
• Air handling
grids
Allowance
• Long life 50,000hrs FMP ET
Product AXCEL
Lumen Options
4000lm
4000K LED
5000lm
4000K LED
6000lm
4000K LED
6900lm
4000K LED
3900lm
3000K LED
4900lm
3000K LED
5800lm
3000K LED
6600lm
3000K LED
Lumen Options
5000lm
4000K LED
4000lm
4000K LED
4600lm
3000K LED
3700lm
3000K LED
Control Gear ND
Non dimming
HA
Analogue dimming
HD
DALI dimming
HS
Switch dimming
HX
DSI dimming
Diffuser Option ET
Polar frost
FMP
Microprism
Options X3
Air handling
X6
Shallow void
X7
750mm Tile
X16
Power Over
Ethernet
EA
Self test emergency
EC
Central battery
emergency
ED
DALI emergency
EE
Nominal Size 5
500mm x 500mm
6
600mm x 600mm
exposed grids
side arm brackets
50.000hrs
IP Rating
IP20
gear and polar frost diffuser. Catalogue No AXCEL5K4KHDET
LED
Recessed
Depth
105mm
Min 65mm
Available with
750mm
Tile
Nominal
Size
600mm x
600mm
Nominal
Size
500mm x
500mm
Part L2

ECA

BUILT
IN
BRITAIN
LumEdit
EXEMPLAR-LED-4160-5K-O-200 Polar Diagram
04.08.15 / 13:06 1/1
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
LumEdit
04.08.15 / 13:36 1/1
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
AXCEL
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

RECESSED
61
futuredesigns.co.uk

62
EXEMPLAR is at the forefront of workplace lighting. Its design produces
fluid light across its surface which produces a light that gives incredible
illuminance on the working areas, walls and ceilings resulting in a
fresh, light space that is a pleasure to be in. EXEMPLAR is a person
centred luminaire perfect for general lighting, face to face meetings and
conference calling. It’s simple in its design which means it’s simple to
install. The high performance means installation points can be reduced
whilst maintaining excellent light levels. This high performance also
benefits energy saving and carbon reduction.
• Lenses allow improved rendering of
light on walls & ceiling
• Air handling
grids
Allowance
Product EXEMPLAR
Lumen Options
sion
Suffix LIN
4000lm
4000K LED
5000lm
4000K LED
6000lm
4000K LED
6900lm
4000K LED
3900lm
3000K LED
4900lm
3000K LED
5800lm
3000K LED
6600lm
3000K LED
Lumen Options
sion
Suffix LIN
5000lm
4000K LED
6300lm
4000K LED
7500lm
4000K LED
8600lm
4000K LED
4900lm
3000K LED
6100lm
3000K LED
7300lm
3000K LED
8300lm
3000K LED
Lumen Options
Suffix LIN
3000lm
4000K LED
3800lm
4000K LED
4500lm
4000K LED
5200lm
4000K LED
2900lm
3000K LED
3700lm
3000K LED
4300lm
3000K LED
5000lm
3000K LED
Control Gear ND
Non dimming
HA
Analogue dimming
HD
DALI dimming
HS
Switch dimming
HX
DSI dimming
Diffuser Option ET
Polar frost
FMP
Microprism
Options X1
Special size
X3
Air handling
X6
Shallow Void
X16
Power Over
Ethernet
EE
Emergency via independ-
ent ELED
EC
Central battery
emergency
ED
DALI emergency
EA
Self test emergency
Nominal Sizes LIN9
300 x 900mm
LIN12
300 x 1200mm
LIN15
300 x 1500mm
exposed grids
side arm brackets
50.000hrs
IP Rating
IP20
To Specify: 1200mm x 300mm luminaire with angled frame design to suit 5000lumen cool white LED,
DALI digital dimming control gear and microprism diffuser. Catalogue No EXEMPLAR5K4KHDFMPLIN12
LED
Recessed
Depth
105mm
Min 65mm
Nominal
Size
1500mm x
300mm
Nominal
Size
1200mm x
300mm
Nominal
Size
900mm x
300mm
Part L2

ECA

BUILT
IN
BRITAIN
LumEdit
04.08.15 / 13:36 1/1
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
LumEdit
EXEMPLAR-4K-4K-ET-200mA-LIN12 Polar Diagram
04.08.15 / 13:35 1/1
50
100
150
200
250
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
FMP ET
EXEMPLAR
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

RECESSED
63
EXEMPLAR
futuredesigns.co.uk

EXEMPLAR
64
futuredesigns.co.uk

RECESSED
65
futuredesigns.co.uk

RECESSED
67
VANEfuturedesigns.co.uk

68
LED
Recessed
Depth
155mm
Trimmed
94mm x
Length
Trimless
79mm x
Length
Part L2

ECA

BUILT
IN
BRITAIN
• Energy saving
• Versatile design
• Gives any space a clean and
crisp feel
systems & power over
ethernet
Allowance
Striking light scenes are created from VANE with
slices of light that dart across ceilings and walls.
The versatility of VANE enhances any space adding
a visually engaging appearance. Angles, corners
and T junctions extend the possibilities. High grade
extruded aluminium housings give added flexibility
for tailor-made lengths with seamless joins. VANE
is available is recessed (trimmed or trimless) as
well as surface mounted and suspended. Super-
efficient with excellent colour rendering, VANE is
suited to any workspace environment including
receptions, circulation and amenity areas.
Length (mm) Lumen Package 1
(SO) 4000K
Lumen Package 2
(MO) 4000K
Lumen Package 3
(HO) 4000K
560 (not available as emergency) 1300lm 1500lm 1700lm
840 (not available as emergency) 1900lm 2200lm 2600lm
1120 2600lm 3000lm 3400lm
1400 3300lm 3800lm 4300lm
1680 3900lm 4500lm 5200lm
1960 4600lm 5300lm 6000lm
2240 5200lm 6000lm 6900lm
Corner
Configuration
620mm
620mm
Start Length + 5mm End Length + 5mm
+ + +
12.5mm
+
Middle Length
Product VANE
Control ND
Non dimming
HA
Analogue dimming
HD
DALI dimming
HS
Switch dimming
HX
DSI dimming
X16
Power over ethernet
Trim Options TR
Trimmed profile
TL
Trimless profile
Lighting Options Surface mounted (SM) and suspended (WS) available
Finish AN
Anodised finish
VANE can be supplied in various RAL
finishes.
Junctions Corner, L and T junctions available
Diffuser Options ET
Opal PMMA
EA
Self test emergency
EC
Central battery
emergency
ED
DALI emergency
EE
Technical Details R
Recessed via recessing bracket
WM
Recessed into wall
50.000hrs
IP Rating
IP20
To Specify: Please see configuration below . Recessed trimless 4.5m VANE, high efficiency lumen
package, 4000K LED, DALI dimming. Catalogue No: VANESO4KHDTLETR4494mm
Typical VANE Configuration - Trimless
Cutout 81mm x Length (inc endcaps) +1mm
+ + +
2mm 2mm
+
Middle Length
Typical VANE Configuration - Trimmed
Cutout 85mm x Length (inc endcaps) - 19mm
12.5mm
LumEdit
VANE-LED-1024-4K-O-TL-WS-0.565M Polar Diagram
04.08.15 / 13:12 1/1
40
80
120
160
200
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
VANE/R
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

RECESSED
69
futuredesigns.co.uk

RECESSED
VANE
71
futuredesigns.co.uk

RECESSED
VANE
73
futuredesigns.co.uk

74
A statement piece, EDGE features a uniformly lit front fascia with
revolutionary drop frame. The frame bounces light on to walls and
ceilings creating an airy feel to the space. EDGE uses state of the art
LED technology to maximise efficiencies and provide excellent light on
the working plane with low energy consumption. The frame improves
light and definition on walls. EDGE is a unique design with a unique
look.
• Drop frame provides direct/
indirect lighting
• Improved rendering of light on
walls & ceiling
• Illuminated centre section
• Air handling
• To suit concealed & exposed
ceiling grids
Allowance
Product EDGE
Lumen Options
4000lm
4000K LED
5000lm
4000K LED
6000lm
4000K LED
6900lm
4000K LED
3900lm
3000K LED
4900lm
3000K LED
5800lm
3000K LED
6600lm
3000K LED
Control Gear ND
Non dimming
HA
Analogue dimming
HD
DALI dimming
HS
Switch dimming
HX
DSI dimming
Diffuser Option ET
Polar frost
FMP
Microprism
Options X3
Air handling
X6
Shallow void
X7
750mm Tile
X16
Power Over
Ethernet
EA
Self test emergency
EC
Central battery
emergency
ED
DALI emergency
EE
Nominal Size 6
600mm x 600mm
exposed grids
side arm brackets
50.000hrs
IP Rating
IP20
gear and polar frost diffuser. Catalogue No EDGE5K4KHDET
LED
Recessed
Depth
105mm
Min 65mm
Available with
750mm
Tile
Nominal
Size
600mm x
600mm
Part L2

ECA

BUILT
IN
BRITAIN
LumEdit
EDGE-LED-4760-CW-O Polar Diagram
04.08.15 / 13:05 1/1
50
100
150
200
250
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
EDGE
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

RECESSED
75
futuredesigns.co.uk

RECESSED
LED
Recessed
Depth
105mm
Min 65mm
Available with
750mm
Tile
Nominal
Size
600mm x
600mm
Nominal
Size
500mm x
500mm
Nominal
Size
900mm x
300mm
Nominal
Size
1200mm x
300mm
Nominal
Size
1500mm x
300mm
Part L2

ECA

BUILT
IN
BRITAIN
77
Designed specifically for clean room environments such as kitchens
and healthcare, SEEL surpasses tradition, based on an original design
but now incorporating state-of-the-art high performance. IP55 with
a sealed front face, this highly efficient luminaire is perfect at giving
performance where it’s needed on the task areas as well as on the
persons in the space, something which is paramount in the healthcare
profession. SEEL is versatile in its design catering for modular and
linear ceiling systems.
• IP55
• Linear options available
• To suit concealed & exposed ceiling grids
• Links with lighting control systems & power over ethernet
• Part L & Enhanced Capital Allowance
LumEdit
GLOS-5.9K-4K-FMP-300mA-LIN12 Polar Diagram
11.08.15 / 16:01 1/1
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
Product SEEL
Lumen Options
sion
4000lm
4000K LED
5000lm
4000K LED
6000lm
4000K LED
6900lm
4000K LED
3900lm
3000K LED
4900lm
3000K LED
5800lm
3000K LED
6600lm
3000K LED
Lumen Options
sion
5000lm
4000K LED
6300lm
4000K LED
7500lm
4000K LED
8600lm
4000K LED
4900lm
3000K LED
6100lm
3000K LED
7300lm
3000K LED
8300lm
3000K LED
Lumen Options
3000lm
4000K LED
3800lm
4000K LED
4500lm
4000K LED
5200lm
4000K LED
2900lm
3000K LED
3700lm
3000K LED
4300lm
3000K LED
5000lm
3000K LED
Control ND
Non dimming
HA
Analogue dimming
HD
DALI dimming
HS
Switch dimming
HX
DSI dimming
Diffuser Option ET
Polar frost
FMP
Microprism
Options X6
Shallow void
X16
Power Over Ethernet
EA
Self Test emergency
EC
Central battery
emergency
ED
DALI emergency
EE
Nominal Size 5
500mm x 500mm
6
600mm x 600mm
LIN9
300 x 900mm
LIN12
300 x 1200mm
LIN15
300 x 1500mm
exposed grids
Supported with side arm
brackets
50.000hrs
IP Rating
IP55
gear and polar frost diffuser. Catalogue No SEEL5K4KHDETLIN12
LumEdit
SEEL314-T5-HF Polar Diagram
04.08.15 / 13:10 1/1
50
100
150
200
250
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
SEEL
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

78
This unique luminaire uses direct/indirect lighting with LED as a twist
on a classic design. Designed for high performance, BEL creates
lighting that gives fantastic performance at a low cost. With easy
install system, BEL uplifts any space whilst providing energy and cost
savings throughout.
• Air handling
• To suit concealed & exposed ceiling grids
BEL Product BEL
Lumen Options
4600lm
4000K LED
5400lm
4000K LED
6100lm
4000K LED
4500lm
3000K LED
5200lm
3000K LED
6000lm
3000K LED
Lumen Options
(1200mm x 300mm) Nominal
dimension
5200lm
4000K LED
6000lm
4000K LED
6900lm
4000K LED
5100lm
4000K LED
6000lm
4000K LED
6700lm
4000K LED
Control ND
Non dimming
HA
Analogue dimming
HD
DALI dimming
HS
Switch dimming
HX
DSI dimming
Diffuser Option ET
Polar frost
FMP
Microprism
Options X3
Air handling
X6
Shallow void
X7
750mm Tile
X16
Power Over
Ethernet
EA
Self test emergency
EC
Central battery
emergency
ED
DALI emergency
EE
6
600mm x 600mm
LIN12
300 x 1200mm
exposed grids
side arm brackets
50.000hrs
IP Rating
IP20
gear and polar frost diffuser. Catalogue No BEL5K4KHDET
LED
Recessed
Depth
110mm
Available with
750mm
Tile
Nominal
Size
600mm x
600mm
Nominal
Size
1200mm x
300mm
Part L2

ECA

BUILT
IN
BRITAIN
LumEdit
BEL-LED-4.6K-4K-250MA-ET Polar Diagram
04.08.15 / 13:42 1/1
50
100
150
200
250
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

RECESSED
79
futuredesigns.co.uk

RECESSED
81
BEL
futuredesigns.co.uk

ELED
Series of independent self contained emergency LED luminaires designed
for seamless integration into the ceiling and lighting system. ELED’s offers
discreet emergency lighting units as small as Ø50mm as well as surface
options and ELED/LAT which can be incorporated into luminaires. ELED’s offer
3 hour emergency escape lighting.
82
Product ELED
Lumen Options 3 Watt LED
Lamp Degree 60 105 110
Finish Colour SG Silver WH White
Dimensions S1
Ø50mm
SMC
Ø170mm diameter surface
mounted
SMS
170mm x 170mm square surface
mounted
LAT
Emergency unit for
luminaires Ø22mm
S1C
Ø50mm recessed with
corridor Lens
SMCC
Ø170mm surface mounted with
corridor lens
contained conversion kit with
green LED indicator
EA
Self test emergency
EC
Central battery emergency
ED
DALI emergency
EP
EM-Pro emergency
EDS
DALI self test audible
To Specify: Recessed 3 Watt ELED luminaire with 110degree lens to suit DALI. Catalogue No
ELED3110WHS1ED
LED
Part L2

BUILT
IN
BRITAIN
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk
ELED Standard ELED LAT ELED SMCCO ELED SMSQ

RECESSED
Series of LED EXIT signs which are ICEL certified and conform to BS EN
standards. Designed for easy installation and testing, this range of exit
signs features European legend format and 3 hour emergency operation.
83
WM (Wall Mounted)
Product EX LED
Control M3
Maintained
NM3
Non maintained
Direction Arrow AL
Arrow legend left
AR
Arrow legend right
AD
Arrow legend down
Legend S
Single sided
D
Double sided
Finish Colour SG
Silver
WH
White
3 hour integrated self contained conversion
kit with green LED indicator
EA
Self test emergency
ED
DALI emergency
EDS
DALI self test Audible
Mounting R
Recessed
WM
Wall mounted
CM
Ceiling mounted
chain
SM
Surface mounted
To Specify: Surface mounted white EXIT sign with double sided arrow right legend. Non maintained
control gear and 3hour emergency operation. Catalogue No EXLEDNM3DARWHSME3
R (Recessed) SM (Surface Mounted) CM (Ceiling Mounted)
LED
Part L2

BUILT
IN
BRITAIN
EXIT
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

SUSPENDED/SURFACE
SUSPENDED
&SURFACE 86/ SHEER
89/ LATERUL
94/ VANE
99/ ANGOL
100/ VANE/SL
103/ SMART
104/ SLEAK
106/ HAL AIR
108/ HAL
113/ HUB
114/ POD SQ
117/ POD RD
118/ GLAZE
123/ VIVID
124/ SKYLINE
123/ AMADA
128/ STRAIT F1
131/ STRAIT F2

LumEdit
VIVID-LED-7-2-CW Polar Diagram
04.08.15 / 13:12 1/1
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
Designed specifically for reception or feature areas, SHEER has
the ability to add a flash of colour above any workspace. The clever
side-wall system allows any colour to be incorporated, matching with
company colours or for zone recognition. SHEER uses high efficiency
LED to expertly direct light on to the task. It’s compact size of only
60mm height x 46mm width gives it a truly minimalist look. With a
simple engineered joining system, SHEER can be supplied in lengths
to suit. Designed with wire suspensions, SHEER appears as a shard of
colour floating in space.
• Colour diffuser options
• Links with lighting control systems &
power over ethernet
Allowance
• Replaceable LED Module
Product SHEER
Lumen Options
(600mmx600mm) Nominal dimension
1500lm/m
3000K/4000K
Control Gear
Located Remotely
ND
Non dimming
HD
DALI dimming
Diffuser Option Side panels can be supplied in various colours
Emergency Options EE
Technical Details WS
Wire suspensions
Luminaires can be
supplied to various
lengths
Lengths in metres
50.000hrs
IP20
To Specify: SHEER in 3m length with 1200lm/m LED in 4000K with DALI control gear and white side
panels. SHEER3K4KHDWSWH
LED
Depth
60mm
Nominal
Width
46mm
Various
Lengths
Part L2

ECA

BUILT
IN
BRITAIN
SHEER
86
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

SUSPENDED/SURFACE
SHEER
87
futuredesigns.co.uk

SUSPENDED/SURFACE
LumEdit
LATERUL-LED-4608-150-ET-UL-WS Polar Diagram
04.08.15 / 13:08 1/1
40
80
120
160
200
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
LATERUL unites cutting edge design with LED. Creating compelling spaces
using super high efficiency LED, optics and materials. The engineered features
of LATERUL compliment the architectural lines of the traditional and modern
office environment, illuminating not just the space but the most important part
of an office - the workforce.
LATERUL’s goal is to bring high performance lighting to the office with smart
features that benefit everyone from the installation team to the end user.
The skilled design of LATERUL harnesses the power of LED and distributes
it effectively. Resulting in homogeneous light that complies with regulation
and provides a dynamic and vibrant space to be in. This high performance
enables effective light planning, reduces install points, installation and costs.
Importantly LATERUL reduces energy consumption and carbon emissions with
the added benefit of energy cost savings.
• Suspended design
Allowance
• Replaceable LED module
89
Product LATERUL
Lumen Options
Indirect/direct
6300lm
4000K LED
7900lm
4000K LED
9100lm
4000K LED
6100lm
3000K LED
7600lm
3000K LED
8800lm
3000K LED
Lumen Options (DL)
Downlight Only
5200lm
4000K LED
6100lm
4000K LED
6900lm
4000K LED
5100lm
3000K LED
5900lm
3000K LED
6700lm
3000K LED
Control ND
Non dimming
HA
Analogue dimming
HD
DALI dimming
HS
Switch dimming
HX
DSI dimming
Diffuser Option
1100mm lightspace
ET
Polar frost
FMP
Microprism
Standalone SA
2.085m Standalone
2.6m Continuous System M2.6m
Start section
C2.6m
Centre section
F1.245m
End section
2.8m Continuous System M2.8m
Start section
C2.8m
Centre section
F1.245m
End section
3m Continuous System M3m
Start section
C3m
Centre section
F1.245m
End section
Suspension WS
Wire suspended
Emergency Options EA
Self Test emergency via
ELED/LAT
ED
DALI emergency via ELED/
LAT
EE
Emergency via ELED/
LAT
Technical details CRI>80 LED Efficacy 167 lm/W
50.000hrs
IP Rating
IP20
To Specify: Standalone LATERUL with 4700lumen output with cool white LED, uplight, DALI digital
dimming control gear and polar frost diffuser. Catalogue No LATERUL46K4KHDULETWSSA2.085M
Start Length End 1245mm
+
+
Middle Length Standalone 2085mm
+
LED
Depth
65mm
Width
270mm
Centres
Up to 3m
Part L2

ECA

BUILT
IN
BRITAIN
LATERUL
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

LATERUL
90
futuredesigns.co.uk

SUSPENDED/SURFACE
91
futuredesigns.co.uk

SUSPENDED/SURFACE
93
futuredesigns.co.uk

94
LumEdit
04.08.15 / 13:12 1/1
40
80
120
160
200
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
• Energy saving
• Gives any space a clean and
crisp feel
systems & power over
ethernet
Allowance
Striking light scenes are created from VANE with
slices of light that dart across ceilings and walls.
The versatility of VANE enhances any space adding
a visually engaging appearance. Angles, corners
and T junctions extend the possibilities. High grade
extruded aluminium housings give added flexibility
for tailor‑made lengths with seamless joins. VANE
is available is recessed (trimmed or trimless) as
well as surface mounted and suspended. Super-
efficient with excellent colour rendering, VANE is
suited to any workspace environment including
LED
Depth
100mm
79mm x
Length
Part L2

ECA

BUILT
IN
BRITAIN
Trimless
Product VANE (Suspended & Surface Mounted)
Lumen Options SO
Lumen Package 1
MO
Lumen Package 2
HO
Lumen Package 3
Control ND
Non dimming
HA
Analogue dimming
HD
DALI dimming
HS
Switch dimming
HX
DSI dimming
X16
Power over ethernet
Trim Options Trimless profile
Lighting Options UL
Uplight option
As standard luminiare is supplied as
downlight only
Finish AN
Andoised finish
VANE can be supplied in various RAL
finishes.
Junctions Corner, L and T junctions available VERTA
Vertical suspension
Diffuser Options ET
Opal PMMA
Recessed Option For details on VANE recessed please refer to our Receesed book.
EA
Self test emergency
EC
Central battery
emergency
ED
DALI emergency
EE
Wire suspended
SM
Surface mounted
50.000hrs
IP Rating
IP20
To Specify: Please see configuration below . Suspended trimless 4.5m VANE with high efficiency lumen
package, 4000K LED, DALI dimming. Catalogue No: VANESO4KHDTLETWS4496mm
Nominal
Length (mm)
Lumen Package 1
(SO) 4000K/3000K
Lumen Package 2
(MO) 4000K/3000K
Lumen Package 3
(HO) 4000K/3000K
Optional Uplight
4000K/3000K
560 1300lm 1500lm 1700lm 500lm
840 1900lm 2200lm 2600lm 800lm
1120 2600lm 3000lm 3400lm 1100lm
1400 3300lm 3800lm 4300lm 1400lm
1680 3900lm 4500lm 5200lm 1600lm
1960 4600lm 5300lm 6000lm 1900lm
2240 5200lm 6000lm 6900lm 2200lm
Typical VANE Configuration Corner
Configuration
620mm
620mmStart Length + 5mm End Length + 5mm
+ + +
3mm 3mm
+
Middle Length
VANE
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

SUSPENDED/SURFACE
95
futuredesigns.co.uk

SUSPENDED/SURFACE
97
futuredesigns.co.uk

SUSPENDED/SURFACE
LumEdit
04.08.15 / 13:12 1/1
40
80
120
160
200
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
Typical ANGOL
Configuration
+ + +
3mm 3mm
+
Middle Length
• Energy saving
• Gives any space a clean and crisp
feel
• Links with lighting control systems
& power over ethernet
Allowance
ANGOL brings a new dimension to linear
luminaires, with its sweeping sides,
ANGOL fits elegantly into any reception,
office or break out space.
High grade extruded aluminium housings
give added flexibility for tailor-made
lengths with seamless joins. Available with
uplight and as wire suspended or surface
mounted. Super-efficient with excellent
colour rendering.
Product ANGOL
Lumen Options SO
Lumen Package 1
MO
Lumen Package 2
HO
Lumen Package 3
Control ND
Non dimming
HA
Analogue dimming
HD
DALI dimming
HS
Switch dimming
HX
DSI dimming
X16
Power over ethernet
Lighting Options UL
Uplight option
downlight only
Finish AN
Andoised finish
ANGOL can be supplied in various RAL
finishes.
Diffuser Options ET
Opal PMMA
EA
Self test emergency
EC
Central battery
emergency
ED
DALI emergency
EE
Wire suspended
SM
Surface mounted
50.000hrs
IP Rating
IP20
To Specify: Please see configuration below . Suspended trimless 4.5m ANGOL with high efficiency lumen
package, 4000K LED, DALI dimming. Catalogue No: ANGOLSO4KHDTLETWS4496mm
Nominal
Length (mm)
Lumen Package 1
(SO) 4000K/3000K
Lumen Package 2
(MO) 4000K/3000K
Lumen Package 3
(HO) 4000K/3000K
Optional Uplight
4000K/3000K
560 1300lm 1500lm 1700lm 500lm
840 1900lm 2200lm 2600lm 800lm
1120 2600lm 3000lm 3400lm 1100lm
1400 3300lm 3800lm 4300lm 1400lm
1680 3900lm 4500lm 5200lm 1600lm
1960 4600lm 5300lm 6000lm 1900lm
2240 5200lm 6000lm 6900lm 2200lm
LED
Depth
100mm
79mm x
Length
Part L2

ECA

BUILT
IN
BRITAIN
ANGOL
9999
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

100
At only 40mm wide, fine lines
of light can be incorporated
into space providing a visually
engaging appearance. Extruded
aluminium profile gives versatility
to the system, angles, corner and
T junctions extend the possibilities.
VANE/SL is available as suspended,
surface mountd and recessed.
Super efficient with excellent light
rendering, VANE is suited to any
workspace environment including
receptions, circulation and amenity
areas.
VANESLRTRET35
VANESLRTRMP
VANESLWSET35
VANESLWSMP
• Suspended, recessed and surface
mounted option
• Asymmetric option
• Independent emergency
Allowance
Product VANE/SL
Lumen Options 5400lm
4000K
1132mm
6800lm
4000K
1132mm
5200lm
3000K
1412mm
6600lm
3000K
1412mm
Mounting Options WS
Wire suspended
SM
Surface mounted
RTR
Recessed trimmed
RTL
Receseed trimless
Asymetric Option (AS) 3200lm
4000K/3000K
1224mm
RTR Recessed trimmed
WS Wire suspended
4000lm
4000K/3000K
1524mm
RTR Recessed trimmed
WS Wire suspended
Control ND
Non dimming
HD
DALI dimming
Diffuser MP
Microprism
ET35
PMMA 35mm depth difuser (not
available as asymmetric)
Finish Anodised
Technical Details CRI>80 LED Efficacy 167lm/W
50.000hrs
IP Rating
IP20
To Specify: Suspended luminaire with uplight to suit 6000lumen cool white LED, DALI digital dimming
control gear. High diffuser for side lighting. Catalogue No VANESL6K4KHDWSET35.
LED
Depth
61mm -
100mm
Trimmed
56mm x
Length
Trimless
42mm x
Length
Part L2

ECA

BUILT
IN
BRITAIN
Luminaire data
SPITTLER, SL764 (8764251316470)
LDC
Future Designs, T: +44 (0)1732 867420, E: info@futuredesigns.co.uk
Relux1
40
80
120
160
200
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 205 205 205
10° 211 200 211
20° 211 183 211
30° 206 159 206
40° 195 131 195
50° 180 101 180
60° 160 72 160
70° 135 43 135
80° 108 16 108
90° 85 1 85
100° 75 0 75
110° 66 0 66
120° 58 0 58
130° 49 0 49
140° 39 0 39
150° 29 0 29
160° 18 0 18
170° 8 0 8
180° 0 0 0
cd / 1000 lm
C0 / C180 C90 / C270
Manufacturer : SPITTLER
Order number : 8764251316470
Luminaire name : SL764
Equipment : 1 x LED 35W / 3420 lm
File name : rlx16957714.ldt
Light distribution
Beam Angle
: sym. to C0-C180 / C90-C270
: -- C0-C180
-- C90-C270
Luminaire data
SPITTLER, SL764 (8764291406470)
LDC
Relux1
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 372 372 372
5° 370 371 370
10° 362 364 362
15° 351 353 351
20° 338 340 338
25° 322 323 322
30° 301 304 301
35° 279 282 279
40° 256 260 256
45° 230 233 230
50° 203 207 203
55° 176 179 176
60° 147 151 147
65° 119 121 119
70° 91 92 91
75° 63 63 63
80° 37 35 37
85° 15 13 15
90° 1 0 1
cd / 1000 lm
C0 / C180 C90 / C270
Order number : 8764291406470
Luminaire name : SL764
Light distribution
Beam Angle
: sym. to C0-C180 / C90-C270
: 105.5° C0-C180
106.9° C90-C270
Recessed & Suspended Recessed & Suspended ET35
VANE/SL
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

SUSPENDED/SURFACE
VANE/SL
101
futuredesigns.co.uk

SUSPENDED/SURFACE
• Energy saving
• Gives any space a clean and crisp feel
• Links with lighting control systems & power
over ethernet
SMART is a system which creates fine slices of light across the space. The
versatility of SMART enhances any space adding a visually engaging appearance.
SMART offers continuous lighting in a compact size, super efficient with excellent
light rendering, SMART is suited to any workspace environment including
SMART Continuous
SMART Standalone
103
Product SMART
Control Gear HX
High frequency DSI
dimming
HA
High frequency Analogue
dimming
HD
High frequency DALI
dimming
Diffuser Option ET
030
Lighting Options UL
Uplight Option
downlight only
Finish WH
RAL 9010
SMART can be supplied in various RAL
finishes.
Junctions Corner, L and T junctions availale.
End and centre infill sections 80mm
EA
Self Test Emergency
EC
Central Battery
Emergency
ED
DALI Emergency
EE
Emergency via ELED
Technical details Recessed via recessing bracket
50.000hrs
IP Rating
IP20
To Specify: Please see configuration below . Suspended SMART 250mA with 4000K LED, uplight, DALI
dimming and wire suspension. Catalogue No: SMARTHO4KHDR1964mm
LumEdit
04.08.15 / 13:12 1/1
40
80
120
160
200
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
Length (mm) Lumen Package 1
(SO) 4000K/3000K
Lumen Package 2
(MO) 4000K/3000K
Lumen Package 3
(HO) 4000K/3000K
Optional Uplight
4000K/3000K
1220 2600lm 3000lm 3400lm 1100lm
1500 3300lm 3800lm 4300lm 1400lm
1780 3900lm 4500lm 5200lm 1600lm
2060 4600lm 5300lm 6000lm 1900lm
2340 5200lm 6000lm 6900lm 2200lm
LED
Nominal
Depth
80mm
Nominal
Width
62mm
Length
Various
Part L2

ECA

BUILT
IN
BRITAIN
SMART
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

104
SLEAK by name, sleek by nature. This suspened luminaire has an ultra
thin 13mm depth, giving it a weightless floating appearance. SLEAK
offers fantastic lighting that seamlessly intergrates into the space.
Suitable for office, meeting as well as feature areas. SLEAK expertly
harnesses light using high efficiency microprism with LED side lighting.
Light is distributed evenly over the face of the luminaire giving a
uniformly lit fascia. SLEAK is available as direct or direct/indirect
distribution, surface mounted options are also available, giving extra
flexibility to the range. SLEAK benefits from LED power savings,
reducing energy use in the space and reducing carbon.
• Suspended and surface mounted
option
• Daylight sensor & PIR available
Allowance
Product SLEAK
LED Indirect/Direct
1547mm / DSP 1567mm
10400lm
4000K
16300lm
4000K
10090lm
3000K
15810lm
3000K
LED Indirect/Direct
1247mm / DSP 1267mm
8000lm
4000K
9200lm
4000K
11500lm
4000K
7760lm
3000K
8920lm
3000K
11160lm
3000K
LED Suspended Direct
1547mm / DSP 1567mm
5700lm
4000K
5530lm
3000K
LED Options Direct
Surface mounted (SM)
5700lm
4000K
5530lm
3000K
Control ND
Non dimming
HD
DALI dimming
X16
Power Over Ethernet
Diffuser Microprismatic Diffuser
Finish BL
RAL9005
DG
DB703 (graphite)
SG
RAL9006
WH
RAL9016
Daylight Sensor & PIR DSP
Daylight sensor & PIR add 20mm to the length
Mounting Options WSUL
Suspended via wire
suspension
With upliighting
WSDL
Suspended via wire
suspension
Direct lighting
SM
Surface mounted
available as direct
lighting only
50.000hrs
IP Rating
IP20
To Specify: White 1200mm x 250mm suspended luminaire with uplight to suit 6000lumen cool white
LED, DALI digital dimming control gear. Catalogue No SLEAK6K4KHDWSULWH
Surface Mounted Option
LumEdit
SLEAK3809-WW-MP-UL-WS Polar Diagram
04.08.15 / 13:11 1/1
50
100
150
200
250
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
LED
Depth
min
13m‑m
Nominal
Size
250mm x
1247mm
Part L2

ECA

BUILT
IN
BRITAIN
SLEAK
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

SUSPENDED/SURFACE
SL713PLLEDThe SL713 pendant luminaire is a modern and filigree workplace light offering flexible and individual
positioning options. It is particularly innovative and efficient thanks to an ultra-flat design of just 13 mm.
Theexcellentcraftsmanshipofitsprofileconnectionscreatesaperfectlook.Theluminairehousingis
madeofaspecial'ThinSkate'diecastaluminiumprofile,whichissynonymouswithoutstandingquality
ofproduction.Thescratch-proofsurfacefinishingwithitspowdercoatingaddsthefinaltouchtothe
design.Thehighqualityofilluminationsupportsdemandingvisualtasks,whileananti-glaremicroprism
covercreatesanappealingroomatmosphere. 105
futuredesigns.co.uk
SLEAK

Render of HAL AIR
Render of HAL AIR
illuminated
HALAIR106
futuredesigns.co.uk

SUSPENDED/SURFACE
LumEdit
8719431846430-8719431846430 Polar Diagram
16.05.16 / 13:12 1/1
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
HAL AIR is an innovative suspended luminaire that gives a weighless floating
effect to the space. The design uses transparent lenses which when illuminated
are flooded with light. This clear lens gives the appearance of frames
suspended in the air and thus blends in with the interior.
High performance lighting benefits everyone from the installation team to the
end user. Harnessing the power of LED and distributing it effectively, results in
effective light planning, reduction in installation points and costs. In turn this
reduces energy costs, consumption and carbon emissions.
• Transparent nano-lens
107
Product HAL AIR
LED Indirect/Direct 8100lm
4000K
Control ND
Non dimming
HD
DALI dimming
Finish SG
RAL9006
WH
RAL9016
Mounting Options WS
Suspended via wire suspension
50.000hrs
IP Rating
IP20
To Specify: White suspended luminaire with uplight to suit 8100lumen cool white LED, DALI digital
dimming control gear. Catalogue No HALAIR8K4KHDWSWH
LED
Nominal
Depth
20mm
Nominal
Width
330mm
Nominal
Length
1542mm
Part L2

ECA

BUILT
IN
BRITAIN
HALAIR
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

108
Where simplistic lines are key to the space, HAL is a suspended lighting system
with leading edge design. HAL uses an innovative diffuser system to illuminate
spaces, the task and the people within. Bringing high performance lighting
to the office that benefits everyone from the installation team to the end user.
Harnessing the power of LED and distributing it effectively, results in effective
light planning, reduction in installation points and costs. In turn this reduces
energy costs, consumption and carbon emissions.
Product HAL
LED Indirect/Direct 7900lm
4000K
13000lm
4000K
7600lm
3000K
12500lm
3000K
LED Direct 3800lm
4000K
7400lm
4000K
3700lm
3000K
7100lm
3000K
Control ND
Non dimming
HD
DALI dimming
Finish DG
DB703 (graphite)
SG
RAL9006
WH
RAL9016
Mounting Options WSUL
With upliighting
WSDL
Direct lighting
50.000hrs
IP Rating
IP20
To Specify: White suspended luminaire with uplight to suit 7900lumen cool white LED, DALI digital
dimming control gear. Catalogue No HAL79K4KHDWSULWH
Luminaire data
SPITTLER, SL740 LED (8740461843430)
LDC
Relux1
40
80
120
160
200
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 238 238 238
10° 229 233 229
20° 195 212 195
30° 153 171 153
40° 123 122 123
50° 42 90 42
60° 12 64 12
70° 11 9 11
80° 7 5 7
90° 0 0 0
100° 3 13 3
110° 31 51 31
120° 92 98 92
130° 128 138 128
140° 160 163 160
150° 184 176 184
160° 197 198 197
170° 209 214 209
180° 213 213 213
cd / 1000 lm
C0 / C180 C90 / C270
Order number : 8740461843430
Luminaire name : SL740 LED
Luminaire efficacy : 106.31 lm/W (C53)
Light distribution
Beam Angle
: sym. to C0-C180 / C90-C270
: -- C0-C180
-- C90-C270
Luminaire data
SPITTLER, SL740 LED (8740261723330)
LDC
Relux1
100
200
300
400
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 485 485 485
10° 464 474 464
20° 395 431 395
30° 309 349 309
40° 249 250 249
50° 93 184 93
60° 29 130 29
70° 25 23 25
80° 15 12 15
90° 0 0 0
100° 3 5 3
110° 9 12 9
120° 21 19 21
130° 37 24 37
140° 53 29 53
150° 53 33 53
160° 40 37 40
170° 39 40 39
180° 40 40 40
cd / 1000 lm
C0 / C180 C90 / C270
Order number : 8740261723330
Light distribution
Beam Angle
: sym. to C0-C180 / C90-C270
: -- C0-C180
-- C90-C270
LED
Depth
45mm
Nominal
Width
300mm
Nominal
Size
1200mm
1500mm
Part L2

ECA

BUILT
IN
BRITAIN
HAL
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

SUSPENDED/SURFACE
109
futuredesigns.co.uk

SUSPENDED/SURFACE
111
futuredesigns.co.uk

SUSPENDED/SURFACE
HUB
LumEdit
HUB632-PLT-1500 Polar Diagram
04.08.15 / 13:08 1/1
20
40
60
80
100
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
This eclectic group of pendants can be produced in a wide range of
sizes and styles. A wide range of colours can be supplied. The HUB
is elegantly designed to incorporate LED downlight with optional
uplight. These drum style pendants are specifically designed for the
workplace environment ensuring energy savings and function does not
compromise flair.
power over ethernet
113
Product HUB
Lumen Options
HUB Circular
5100lm
4000K
Ø600mm
10300lm
4000K
Ø900mm
18600lm
4000K
Ø1200mm
4900lm
3000K
Ø600mm
9900lm
3000K
Ø900mm
17900lm
3000K
Ø1200mm
Lumen Options
HUB Square (SQ)
5000lm
4000K
600mm x
600mm
11300lm
4000K
900mm x
900mm
20100lm
4000K
1200mm x
1200mm
4800lm
3000K
600mm x
600mm
10900lm
3000K
900mm x
900mm
19500lm
3000K
1200mm x
1200mm
Control ND
Non dimming
HA
Analogue dimming
HX
DSI dimming
HD
DALI dimming
Diffuser Option ET
Polar frost
Uplight Option UL
Uplight
1000lm
600mm
2000lm
900mm & 1200mm
Luminaire Size 600mm
Ø600mm
900mm
Ø900mm
1200mm
Ø1200mm
SQ600mm
600mm x 600mm
SQ900mm
900mm x 900mm
SQ1200mm
1200mm x 1200mm
Options Please contact us to discuss size & colour options.
Standard depth 200mm. Other depths are available
Emergency Option EE
EC
Central Battery Emergency
Technical details Suspended from ceiling rose
50.000hrs
IP Rating
IP20
To Specify: Ø600mm x 200mm depth luminaire with 5100lm, 3000K LED, non dimming driver and
RAL3000 colour fabric. Catalogue No HUB5.1K4KHDET600(COLOUR)
LED
Standard
Depth
200mm
Various
Sizes
Available
Various
Colours
Available
Part L2

ECA

BUILT
IN
BRITAIN
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

114
LumEdit
POD2650-LED-ET-450 Polar Diagram
04.08.15 / 13:09 1/1
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
POD brings a statement to the workplace, primarily used as a
centrepiece to meeting rooms, breakout spaces and reception areas.
POD is designed with an aluminium shell, which can be supplied
as anodised or finished in standard RAL colours. Incorporating an
LED system, which gives a fluid flood of light to the front face and
benefiting from energy savings. Available in a variety of sizes to suit
any space, POD can be supplied as suspended or surface mounted.
• Suspended or surface mounted
Product POD SQ
Lumen Options (S1)
3880lm
Microprism lens
(MP)
3000K LED
4000lm
Microprism
Lens (MP)
4000K LED
3350lm
Opal lens (ET)
3000K LED
3460lm
Opal lens (ET)
4000K LED
Lumen Options (S2)
8750lm
Microprism lens
(MP)
3000K LED
9020lm
Microprism
Lens (MP)
4000K LED
7550lm
Polar frost lens
(ET)
3000K LED
7790lm
Opal lens (ET)
4000K LED
Lumen Options (S3)
(1200mmx1200mm) Nominal
dimension
15550lm
Microprism lens
(MP)
3000K LED
15800lm
Microprism lens
(MP)
4000K LED
16040lm
Opal lens (ET)
3000K LED
13840lm
Opal lens (ET)
4000K LED
Lumen Options (S4)
(1500mmx1500mm) Nominal
dimension
20910lm
Opal lens (ET)
3000K LED
21640lm
Opal lens (ET)
4000K LED
Control ND
Non dimming
HD
DALI dimming
Diffuser Option ET
Opal PMMA
MP
Microprism
Options WS
Wire suspended
SM
Surface mounted
Finish AN
Anodised
WH
White
SG
Silver Grey
BL
Black
Emergency Options EC
Central Battery Emergency
EE
Technical Details CRI>80 LED Efficacy 168 lm/W
50.000hrs
IP Rating
IP20
To Specify: Surface mounted 900mm x 900mm, 9020lumen POD square with microprism lens, non
dimming driver. and silver grey finish. Catalogue No PODSQ9K4KNDMPSGSMS2
LED
Depth
130mm
Nominal
Size
600mm x
600mm
Nominal
Size
900mm x
900mm
Nominal
Size
1250mm x
1250mm
Nominal
Size
1500mm x
1500mm
Part L2

ECA

BUILT
IN
BRITAIN
PODSQ
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

SUSPENDED/SURFACE
PODSQ
115
futuredesigns.co.uk

POD/RD
116
futuredesigns.co.uk

SUSPENDED/SURFACE
LumEdit
POD2650-LED-ET-450 Polar Diagram
04.08.15 / 13:09 1/1
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
POD brings a statement to the workplace, primarily used as a
centrepiece to meeting rooms, breakout spaces and reception areas.
POD is designed with an aluminium shell, which can be supplied as
anodised or finished in standard RAL colours. Incorporating an LED
system, which gives a homogeneous flood of light to the front face and
benefiting from energy savings. Available in a variety of sizes to suit
any space, POD can be supplied as suspended or surface mounted.
• Suspended or surface mounted
117
Product POD/RD
Lumen Options (S1)
Ø450 Nominal dimension
2440lm Micro-
prism lens (MP)
3000K LED
2650lm Micro-
prism lens (MP)
4000K LED
2190lm Opal
lens (ET)
3000K LED
2380lm Opal
lens (ET)
4000K LED
Lumen Options (S2)
5260lm Micro-
prism lens (MP)
3000K LED
5710lm Micro-
prism lens (MP)
4000K LED
4730lm Opal
lens (ET)
3000K LED
5140lm Opal
lens (ET)
4000K LED
Lumen Options (S3)
11200lm Micro-
prism lens (MP)
3000K LED
12180lm Micro-
prism lens (MP)
4000K LED
10080lm Opal
lens (ET)
3000K LED
10960lm Opal
lens (ET)
4000K LED
Lumen Options (S4)
20540lm Micro-
prism lens (MP)
3000K LED
22330lm Micro-
prism lens (MP)
4000K LED
18480lm Opal
lens (ET)
3000K LED
20090lm Opal
lens (ET)
4000K LED
Lumen Options (S5)
25210lm Opal lens (ET)
3000K LED
27400lm Opal lens (ET)
4000K LED
Control ND
Non dimming
HD
DALI dimming
Diffuser Option ET
Opal PMMA
MP
Microprism
Options WS
Wire suspended
SM
Surface mounted
Finish AN
Anodised
WH
White
SG
Silver Grey
BL
Black
Emergency Options EC
EE
50.000hrs
IP Rating
IP20
To Specify: Surface mounted Ø1240mm cool white circular POD with opal lens, non dimming driver. and
anodised finish. Catalogue No POD184K4KNDETANS3.
LED
Depth
130mm
Nominal
Size
Ø450
Ø650
Nominal
Size
Ø950
Nominal
Size
Ø1240
Ø1500
Part L2

ECA

BUILT
IN
BRITAIN
PODRD
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

LumEdit
04.08.15 / 13:12 1/1
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
GLAZE
Allowance
• Mounted within extrusion
• Energy saving and maintenance
free
• Available in any length
• Suitable for concealed lighting
GLAZE caters for all
backlit and feature lighting
needs. This versatile LED
system brings quality
LED lighting with low
energy use to any scheme.
Available in 3 variations
of lumen outputs, GLAZE
sits perfectly in any cove,
pelmet, undershelf or
ceiling system.
Extrusion
Clear diffuser (CL) Etched diffuser (ET) Arched frosted diffuser (AET)
Product GLAZE
Lumen Options
(Per metre)
600lm/m
3000K/4000K/6500K
900lm/m
3000K/4000K/6500K
1500lm/m
3000K/4000K/6500K
Control Gear
Located Remotely
ND
Non dimming
HA
Analogue dimming
HD
DALI dimming
Diffuser CL
Clear diffuser
ET
Frosted diffuser
AET
Arched frosted diffuser
Technical details Luminaires can be supplied to
various lengths
109mm cut points
50.000hrs
IP20
To Specify: GLAZE in 3m length with 1500lm/m LED in 4000K with DALI control gear and clear diffuser.
Catalogue No GLAZE1.5K4KHDCL3M
LED
Depth
10mm
Nominal
Size
upto 4.8m
Cut Length
100mm
Part L2

ECA

BUILT
IN
BRITAIN
118
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

SUSPENDED/SURFACE
GLAZE
119
futuredesigns.co.uk

SUSPENDED/SURFACE
VIVID&GLAZE
121
futuredesigns.co.uk

SUSPENDED/SURFACE
VIVID LED caters for all backlit and feature lighting needs. This
versatile LED system brings quality LED lighting with low energy use
to any scheme. Available in 3 variations of lumen outputs, VIVIDLED
sits perfectly in any cove, pelmet, stretched ceiling or illuminated wall.
• Mounted on heat-sink to provide maximum life out of the LEDs
• Energy saving and maintenance free
• Available in any length
• Uniform indirect light
• Suitable for illuminated walls and stretched ceilings
LumEdit
04.08.15 / 13:12 1/1
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
123
Product VIVID
Lumen Options
(Per metre)
600lm/m
3000K/4000K
1000lm/m
3000K/4000K
1500lm/m
3000K/4000K
Control Gear
Located Remotely
ND
Non dimming
HA
Analogue dimming
HD
DALI dimming
HX
DSI dimming
Technical details Luminaires can be supplied to
various lengths
100mm cut points
50.000hrs
IP20
To Specify: VIVID in 3m length with 1200lm/m LED in 4000K with DALI control gear.
Catalogue No VIVID3K4KHD
LED
Depth
10mm
Nominal
Size
upto 4.8m
Cut Length
100mm
Part L2

ECA

BUILT
IN
BRITAIN
VIVID
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

124
LumEdit
SKYLINE228-O-UL-WS Polar Diagram
04.08.15 / 13:10 1/1
40
80
120
160
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
SKYLINE is impressive as it is practical. This super system was
designed to not just illuminate but house all modern cable systems
and incorporate systems such as downlighter modules, PIR and voice
evacuation systems. Its unique engineered design includes specially
crafted junction sections, which ensure LV and ELV cables do not
cross. Engineered modules allow for seamless joins and flexibility in
the design. SKYLINE can be designed to follow staircase structures
and architectural details as well as providing excellent lighting to the
working environment.
• Designed to incorporate light as
well as being a discrete trunking
system
• Bespoke luminaire which can house
speakers, smoke detectors and
daylight sensors
• Totally unique lighting product
Allowance
Product SKYLINE
Lumen Options
6300lm
4000K LED
7900lm
4000K LED
9100lm
4000K LED
6100lm
3000K LED
7600lm
3000K LED
8800lm
3000K LED
Lumen Options
7900lm
4000K LED
9900lm
4000K LED
11400lm
4000K LED
7600lm
3000K LED
9600lm
3000K LED
11100lm
3000K LED
Control ND
Non dimming
HA
Analogue dimming
HD
DALI dimming
HS
Switch dimming
HX
DSI dimming
Diffuser Option ET
Polar frost Diffuser
FMP
Microprism
Options X16
Power Over Ethernet
CW
Cableway
DL
Downlight module
PIR
Presence detector
SD
Smoke detector
JN
Junction modules
EA
Self test emergency
EC
Central battery
Emergency
ED
DALI emergency
EE
Emergency via ELED
Suspended via wire suspensions
50.000hrs
IP Rating
IP20
To Specify: 1200mm x 300mm luminaire to suit 6300lumen cool white LED, DALI digital dimming
control gear and polar frost diffuser. Catalogue No SKYLINE6.3K4KHDETWS
LED
Depth
125mm
Nominal
Width
400mm
Nominal
Length
900mm to
1500mm
Part L2

ECA

BUILT
IN
BRITAIN
SKYLINE
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

SUSPENDED/SURFACE
SKYLINE
125
futuredesigns.co.uk

SUSPENDED/SURFACE
LumEdit
AMADA135T5HFALBWH Polar Diagram
04.08.15 / 11:59 1/1
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
Simple lighting system designed for data centre, racking, library and
archive lighting. Using speciality diffusers to illuminate the vertical
and horizontal planes AMADA has a specifically engineered body which
envelopes the space with light. AMADA can be suspended, surface or
mounted to trunking. Efficient LEDs with high rated life also reduces
install points but also provides huge energy savings.
• Reduces installed points
• Simple surface, suspended or track mounting
• Robust construction
• Replaceable LED modue
Product AMADA
Lumen Options
1200mm Nominal dimension
4800lm
4000K LED
5600lm
4000K LED
6100lm
4000K LED
4600lm
3000K LED
5400lm
3000K LED
6300lm
3000K LED
Lumen Options
1500mm Nominal dimension
6000lm
4000K LED
7000lm
4000K LED
8000lm
4000K LED
5800lm
3000K LED
6800lm
3000K LED
7700lm
3000K LED
Control ND
Non dimming
HA
Analogue dimming
HD
DALI dimming
HS
Switch dimming
HX
DSI dimming
Mounting Option WS
Wire suspension
SM
Surface mounted
TM
Trunking mounted
Diffuser Option ET
Polar frost diffuser
Options X16
Power Over Ethernet
EA
Self test emergency
EC
Central battery
emergency
ED
DALI emergency
EE
Emergency via ELED
EP
EM-Pro emergency
50.000hrs
IP Rating
IP20
To Specify: 1200mm x 300mm trunking mounted luminaire to suit 4800lumen cool white LED, DALI
digital dimming control gear and polar frost diffuser. Catalogue No AMADA4.8K4KHDETTM
LED
Depth
110mm
Nominal
Width
105mm
Nominal
Length
1200mm
1500mm
Part L2

ECA

BUILT
IN
BRITAIN
AMADA
127127
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

The STRAIT F1 free-standing luminaire is a modern workplace light
offering flexible and individual positioning options. It is particularly
innovative and efficient thanks to an ultra-flat luminaire head design of
just 13 mm.
The high quality of illumination supports demanding visual tasks,
while an anti-glare microprism cover creates an appealing room
atmosphere. The lumianire offers indirect/direct distribution with LED
sidelight for homogeneous light distribution.
power over ethernet
LED
Head
449mm x
726mm
Height
1913mm
Part L2

ECA

BUILT
IN
BRITAIN
Product STRAIT F1
LED Options 8830lm
3000K
9150
4000K
Control MO
Mains only
PIR
Daylight control
Diffuser Option MP
Microprism
Emergency Option ED
DALI Emergency
Finish DG
DB 703
(Graphite)
SG
RAL 9006
(Aluminium)
WH
RAL 9016
(white)
Speial colours
available
Technical Details CRI>80 LED Efficacy 70% lm
50.000hrs
IP Rating
IP20
To Specify: Free standing luminaire to suit 9150lumen cool white LED, PIR control gear and aluminium
finish. Catalogue No STRAIT91K4KPIRMPSGF1
Luminaire data
SPITTLER, SL713 LED (!8713761865380(BLACK FLOORNMOUNT))
LDC
Object
Installation
Project number
Date
: 9-10 Philpot lane
: 1st, 2nd, 3rd 4th WC Lift Lobby Rev D
: FD8341
: 12.10.2015
FOR CATALOGUE
40
80
120
160
200
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 205 205 205
10° 199 203 199
20° 186 190 186
30° 158 162 158
40° 120 122 120
50° 71 74 71
60° 38 40 38
70° 18 23 18
80° 8 11 8
90° 1 0 1
100° 101 24 101
110° 205 62 205
120° 213 83 213
130° 154 87 154
140° 108 94 108
150° 98 103 98
160° 107 110 107
170° 111 112 111
180° 112 112 112
cd / 1000 lm
C0 / C180 C90 / C270
Order number : !8713761865380(BLACK FLOORNMOUNT)
Luminaire efficacy : 81.51 lm/W (C52)
Light distribution
Beam Angle
: sym. to C0-C180 / C90-C270
: -- C0-C180
-- C90-C270
STRAITF1
128
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

SUSPENDED/SURFACE
129
futuredesigns.co.uk

FLOOR
STANDING
130
futuredesigns.co.uk

SUSPENDED/SURFACE
STRAITF2
LED
Head
312mm x
700mm
Height
1940mm
Part L2

ECA

BUILT
IN
BRITAIN
Product STRAIT F2
LED Options 12240lm
3000K
12660lm
4000K
Control MO
Mains only
PIR
Daylight control
HT
Touch dim
REM
Daylight control
Diffuser Option MP
Microprism
Finish DG
DB 703
(Graphite)
WH
RAL 9006
(Aluminium)
SG
RAL 9016
(white)
Speial colours
available
Technical Details CRI>80 LED Efficacy 70% lm
50.000hrs
IP Rating
IP20
To Specify: Free standing luminaire to suit 12660 lumen cool white LED, DALI digital dimming control
gear and white aluminium finish. Catalogue No STRAIT126K4KHTMPDGF2
The STRAIT F2 free-standing luminaire offers high functionality in office
environments and is particularly suited for innovative and comfortable
office illumination. Its modern form lets this luminaire slip seamlessly
into any setting. An anti-glare microprism cover provides for an appealing
room atmosphere.
The lumianire offers direct & indirect distribution with LED sidelight for
homogeneous light distribution.
power over ethernet
Luminaire data
SPITTLER, SL740 LED (8740761938430)
LDC
Object
Installation
Project number
Date
: St Andrews House
: 3rd Floor Rev B
: FD8668
: 16.12.2015
Relux1
50
100
150
200
250
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 170 170 170
10° 162 163 162
20° 139 141 139
30° 108 110 108
40° 82 84 82
50° 38 36 38
60° 17 16 17
70° 11 9 11
80° 6 6 6
90° 0 0 0
100° 5 16 5
110° 49 64 49
120° 116 119 116
130° 164 160 164
140° 200 201 200
150° 227 229 227
160° 249 249 249
170° 261 260 261
180° 264 264 264
cd / 1000 lm
C0 / C180 C90 / C270
Order number : 8740761938430
Luminaire efficacy : 100.58 lm/W (D53)
Light distribution
Beam Angle
: sym. to C0-C180 / C90-C270
: -- C0-C180
-- C90-C270
131131
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

DOWNLIGHT/ACCENT
DOWNLIGHT
&ACCENT 135/ BEEM RD 100
138/ BEEM RD 130
141/ BEEM RD 196
142/ BEEM SQ 100
145/ BEEM SQ 150
146/ BEEM SQ 180
149/ BEEM RD 105
150/ BEEM SB 100
151/ BEEM SB 150
153/ BEEM SB 185
154/ BEEM SB 220
157/ BEEM RD SM
160/ BEEM SQ SM
162/ KAR 1M
163/ KAR 2M
164/ KAR 3M
166/ ART T1
168/ ART T2
169/ ART T3

135
DOWNLIGHT/ACCENT
PHOTOMET-
RIC
LED
Recessed
Depth
85mm
Nominal
Size
Ø100mm
Cutout
Size
Ø80mm
Part L2

ECA

BUILT
IN
BRITAIN
Product BEEMRD100
Bezel Style SB
Fixed style
AD
Adjustable
Lumen Options
3000K/4000K
1100lm
3000K/4000K LED
2000lm
3000K/4000K LED
Control ND
Non dimming
HD
DALI dimming
HS
Switch dimming
HA
Analogue dimming
Inner reflector finish BR
Black inner ring
WR
White inner ring
Finish WH
RAL9010
Other finishes available
Emergency Option EE
EC
Technical Details Recessed into false ceiling Side arm retaining springs
CRI>80 LED Efficacy
146 lm/W - 50.000hrs
IP Rating
IP20
To Specify: Ø100mm fixed style downlighter to suit 1100lumen cool white LED, DALI digital dimming
control gear fixed trim. Catalogue No BEEMRD10011K4KHDSBWRWH
Ceiling cut-out: Ø80mm
LumEdit
BEEM-RD-100A-1100 Polar Diagram
04.08.15 / 13:02 1/1
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
Small yet powerful, BEEM RD 100 recessed downlighter offers
powerful LED illumination in a compact 100mm diameter size. The
downlighter is available fixed or adjustable adding sparkle to any space.
Manufactured from high grade spun aluminium with easy install spring
design for simple installation. BEEM RD 100 is available in various
lumen outputs and colour temperatures, suitable for all lighting needs.
BEEM offers an energy efficient lighting and carbon reduction to all
environments, including office space, accent and perimeter lighting,
reception, breakout and circulation spaces.
Fixed Style
Adjustable
• Colour tolerance MacAdam ≥ 3
• Highly efficient reflector
• RAL colour to suit
• Tool-less installation
• Emergency options available
Allowance
• Zhaga replaceable LED module
BEEMRD100
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

DOWNLIGHT/ACCENT
BEEM
137
futuredesigns.co.uk

138
Product BEEM RD 130
3000K/4000K LED
2000lm
3000K/4000K LED
Control ND
Non dimming
HD
DALI dimming
HS
Switch dimming
HA
Analogue dimming
Glass Options ET
Etched glass IP54
CG
Clear glass IP54
CET
Centre etched
glass IP54
OET
Outer etched glass
IP54
NB
Narrow beam
WB
Wide beam
Options PI
Plaster-in kit
Finish WH
White
BL
Black
EA
Self test emergency
EC
Central battery
emergency
ED
DALI emergency
EE
CRI>80 LED Efficacy
146 lm/W - 50.000hrs
IP Rating
IP20
To Specify: Ø130mm downlighter to suit 2000lumen cool white LED, DALI digital dimming control gear,
wide beam distribution & clear glass. Catalogue No BEEMRD1302K4KHDWBETWH
Plaster-in Option (PI)
BEEM RD 130 recessed downlighter offers
powerful LED illumination in a 130mm diameter
luminaire size. Manufactured from high grade
spun aluminium with facet reflector and easy
install spring design for simple installation. BEEM
is available in various lumen outputs and colour
temperatures suitable for all lighting needs. BEEM
RD 130 offers energy efficient lighting with carbon
reduction to all environments, including office
space, accent and perimeter lighting, reception,
breakout, amenity and circulation spaces.
• Emergency conversions available
power over ethernet
BEEMRD130
LED
Minimum
Recessed
Depth
89mm
Nominal
Size
Ø130mm
Cutout
Ø110mm
Part L2

ECA

BUILT
IN
BRITAIN
Luminaire data
Martech UK, 96.2002.NB (96.2002.NB)
LDC
500
1000
1500
2000
2500
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 2486 2486 2486
5° 2285 2285 2285
10° 1820 1820 1820
15° 1271 1271 1271
20° 803 803 803
25° 476 476 476
30° 271 271 271
35° 146 146 146
40° 70 70 70
45° 31 31 31
50° 21 21 21
55° 21 21 21
60° 21 21 21
65° 21 21 21
70° 21 21 21
75° 20 20 20
80° 20 20 20
85° 20 20 20
90° 19 19 19
cd / 1000 lm
C0 / C180
Manufacturer : Martech UK
Order number : 96.2002.NB
Luminaire name : 96.2002.NB
Equipment : 1 x Tridonic SLE LED 17.1W / 1990 lm
Dimensions : D 130 mm x H 5 mm
File name : 96.2002_NB.ldt
Light distribution
Beam Angle
: rotationally symmetric
: 30.6° C0-C180
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

DOWNLIGHT/ACCENT
BEEM
139
futuredesigns.co.uk

141
DOWNLIGHT/ACCENT
Product BEEM RD 196
3000K/4000K LED
2000lm
3000K/4000K LED
3000lm
3000K/4000K LED
Control ND
Non dimming
HD
DALI dimming
HS
Switch dimming
HA
Analogue dimming
Glass Options ET
Etched glass IP54
CG
Clear glass IP54
CET
Centre etched
glass IP54
OET
Outer etched glass
IP54
Finish WH
White
BL
Black
EA
Self test emergency
EC
Central battery
emergency
ED
DALI emergency
EE
CRI>80 LED Efficacy
146 lm/W - 50.000hrs
IP Rating
IP20
To Specify: Ø196mm downlighter to suit 2000lumen cool white LED, DALI digital dimming control gear &
etched glass. Catalogue No BEEMRD1962K4KHDETWH
Luminaire data
Martech UK, 110.2004 (110 Series)
LDC
200
400
600
800
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 922 922 922
5° 907 903 903
10° 857 850 850
15° 776 768 770
20° 674 667 668
25° 560 557 555
30° 438 440 434
35° 312 321 310
40° 196 208 196
45° 106 117 107
50° 50 58 51
55° 24 29 25
60° 15 18 16
65° 11 13 11
70° 8 10 8
75° 6 8 6
80° 5 6 5
85° 4 4 3
90° 3 3 2
cd / 1000 lm
C0 / C180 C90 / C270
Manufacturer : Martech UK
Order number : 110 Series
Luminaire name : 110.2004
Equipment : 1 x DLE (BLO) / 2000 lm
File name : 110_2004.ldt
Light distribution
Beam Angle
: asymmetric
: 29.0° C0
29.1° C90
28.9° C180
28.6° C270
BEEM RD 196 recessed downlighter offers powerful LED illumination
in a 196mm diameter luminaire size. Manufactured from high grade
spun aluminium with easy install spring design for simple installation.
BEEM RD 196 is available in various lumen outputs and colour
temperatures suitable for all lighting needs. BEEM offers energy
efficient lighting with carbon reduction to all environments, including
office space, accent and perimeter lighting, reception, breakout,
amenity and circulation spaces.
power over ethernet
BEEMRD196
LED
Recessed
Depth
123mm
Nominal
Size
Ø196mm
Cutout
Ø185mm
Part L2

ECA

BUILT
IN
BRITAIN
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

142
Product BEEM SQ 100
3000K/4000K LED
2000lm
3000K/4000K LED
Control ND
Non dimming
HD
DALI dimming
HS
Switch dimming
HA
Analogue dimming
Diffuser ET
Polar frost
Finish WH
RAL9010
Emergency Option EE
EC
CRI>80 LED Efficacy
146 lm/W 50.000hrs
IP Rating
IP20
To Specify: 100mm x 100mm downlight luminaire to suit 1100lumen cool white LED, DALI digital
dimming control gear horizontal trim. Catalogue No BEEMSQ10011K4KHDETWH
Ceiling cut-out: 90mm x 90mm
LumEdit
BEEM-SQ-100-1100 Polar Diagram
04.08.15 / 13:04 1/1
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
Small yet powerful, BEEM SQ 100 recessed downlighter offers powerful
LED illumination in a compact 100mm x 100mm size. The downlighter
adds a sparkle to any space. BEEM SQ 100 is available lumen outputs
and colour temperatures with easy install spring design for simple
installation BEEM SQ 100 offers energy efficient lighting with carbon
reduction to all environments, including office space, accent and
perimeter lighting, reception, breakout and circulation spaces.
Allowance
BEEMSQ100
LED
Minimum
Recessed
Depth
86mm
Nominal
Size
100mm x
100mm
Cutout
90mm x
90mm
Part L2

ECA

BUILT
IN
BRITAIN
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

DOWNLIGHT/ACCENT
BEEMSQ
143
futuredesigns.co.uk

145
DOWNLIGHT/ACCENT
Product BEEM SQ 150
3000K/4000K LED
2000lm
3000K/4000K LED
Control ND
Non dimming
HA
Analogue dimming
HD
DALI dimming
HS
Switch dimming
HX
DSI dimming
Diffuser ET
Polar frost
Finish WH
RAL9010
EA
Self test emergency
EC
Central battery
emergency
ED
DALI emergency
EE
CRI>80 LED Efficacy
146 lm/W - 50.000hrs
IP Rating
IP20
To Specify: 150mm x 150mm downlight to suit 2000lumen cool white LED, DALI digital dimming control
gear. Catalogue No BEEMSQ1502K4KHDWH
LumEdit
04.08.15 / 13:04 1/1
100
200
300
400
500
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
BEEM SQ 150 recessed downlighter offers powerful LED illumination
in a 150mm x 150mm luminaire size. BEEM SQ 150 is available in
various lumen outputs and colour temperatures with easy install
spring design for simple installation BEEM offers energy efficient
lighting with carbon reduction to all environments, including office
space, accent and perimeter lighting, reception, breakout, amenity and
circulation spaces.
power over ethernet
BEEMSQ150
LED
Minimum
Recessed
Depth
86mm
Nominal
Size
150mm x
150mm
Cutout
135mm x
135mm
Part L2

ECA

BUILT
IN
BRITAIN
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

146
Product BEEM SQ 180
3000K/4000K LED
2000lm
3000K/4000K LED
3000lm
3000K/4000K LED
Control ND
Non dimming
HD
DALI dimming
HS
Switch dimming
HA
Analogue dimming
Diffuser ET
Polar frost
Finish WH
RAL9010
EA
Self test emergency
EC
Central battery
emergency
ED
DALI emergency
EE
CRI>80 LED Efficacy
146 lm/W - 50.000hrs
IP Rating
IP20
To Specify: 150mm x 150mm downlight luminaire to suit 3000lumen cool white LED, DALI digital
dimming control gear. Catalogue No BEEMSQ1802K4KHDWH
LumEdit
04.08.15 / 13:04 1/1
200
400
600
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
BEEM SQ 180 recessed downlighter offers powerful LED illumination
in a 180mm x 180mm luminaire size. BEEM SQ 180 is available in
various lumen outputs and colour temperatures with easy install
spring design for simple installation BEEM offers energy efficient
lighting with carbon reduction to all environments, including office
space, accent and perimeter lighting, reception, breakout, amenity and
circulation spaces.
power over ethernet
BEEMSQ180
LED
Mnimum
Recessed
Depth
86mm
Nominal
Size
180mm x
180mm
Cutout
165mm x
165mm
Part L2

ECA

BUILT
IN
BRITAIN
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

DOWNLIGHT/ACCENT
147
futuredesigns.co.uk

BEEM/SQ148
futuredesigns.co.uk

149
DOWNLIGHT/ACCENT
LED
Recessed
Depth
100mm
Nominal
Size
Ø108mm
Cutout
Ø98mm
Part L2

ECA

BUILT
IN
BRITAIN
Product BEEM RD 105
LED Options 1000lm
4000K LED
1300lm
4000K LED
1000lm
3000K LED
1300lm
3000K LED
Control ND
Non dimming
HD
DALI dimming
TD
Touch dimming
Diffuser Option O
Opal PMMA
MP
Microprism
Finish RAL9016
Emergency Options ED
DALI emergency
EC
Central battery
emergency
EE
Emergency via independent
ELED
50.000hrs
IP Rating
IP44
To Specify: Ø105mm downlighter to suit 1000lumen cool white LED, DALI digital dimming control gear.
Catalogue No BEEMRD1051K4KNDET9016
Luminaire data
SPITTLER, DL105 LED (8105591143412)
LDC
Object
Installation
Project number
Date
: 9-10 Philpot lane
: FD8341
: 12.10.2015
FOR CATALOGUE
100
200
300
400
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 435 435 435
5° 433 433 433
10° 427 427 427
15° 417 417 417
20° 401 401 401
25° 392 392 392
30° 383 383 383
35° 333 333 333
40° 243 243 243
45° 164 164 164
50° 119 119 119
55° 89 89 89
60° 63 63 63
65° 13 13 13
70° 2 2 2
75° 0 0 0
80° 0 0 0
85° 0 0 0
90° 0 0 0
cd / 1000 lm
C0 / C180
Order number : 8105591143412
Luminaire name : DL105 LED
Light distribution
Beam Angle
: 83.2° C0-C180
Luminaire data
SPITTLER, DL105 LED (8105561146410)
LDC
Object
Installation
Project number
Date
: 9-10 Philpot lane
: FD8341
: 12.10.2015
FOR CATALOGUE
200
400
600
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 665 665 665
5° 659 659 659
10° 665 665 665
15° 654 654 654
20° 612 612 612
25° 533 533 533
30° 400 400 400
35° 287 287 287
40° 200 200 200
45° 132 132 132
50° 95 95 95
55° 82 82 82
60° 75 75 75
65° 19 19 19
70° 2 2 2
75° 1 1 1
80° 1 1 1
85° 0 0 0
90° 0 0 0
cd / 1000 lm
C0 / C180
Order number : 8105561146410
Luminaire name : DL105 LED
Light distribution
Beam Angle
: 66.0° C0-C180
Small yet powerful, BEEMRD105 recessed downlighter offers powerful
LED illumination in a compact 105mm diameter size, adding sparkle
to any space. Manufactured from high grade spun aluminium with
easy install springs designed for simple installation. BEEMRD105 is
available in various lumen outputs and colour temperatures suitable for
all lighting needs. BEEMRD105 offers an energy efficient lighting and
carbon reduction to all environments, including office, accent, perimeter
lighting, reception, breakout and circulation spaces.
• RAL9016 as standard
Allowance
BEEMRD105
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

150
LED
Recessed
Depth
95mm
Nominal
Size
Ø108mm
Cutout
Ø98mm
Part L2

ECA

BUILT
IN
BRITAIN
Luminaire data
SPITTLER, DL100 superbasic LED (810710934003)
LDC
Object
Installation
Project number
Date
: KFH Clerkenwell
: Ground Floor Lighting Design
: FD8838
: 14.12.2015
Relux1
100
200
300
400
500
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 514 514 514
5° 510 510 510
10° 499 499 499
15° 482 482 482
20° 459 459 459
25° 430 430 430
30° 397 397 397
35° 360 360 360
40° 315 315 315
45° 259 259 259
50° 198 198 198
55° 135 135 135
60° 84 84 84
65° 50 50 50
70° 27 27 27
75° 17 17 17
80° 10 10 10
85° 4 4 4
90° 1 1 1
cd / 1000 lm
C0 / C180
Order number : 810710934003
Luminaire name : DL100 superbasic LED
Luminaire efficacy : 81 lm/W (A50)
Light distribution
Beam Angle
: 90.4° C0-C180
BEEMSB100 Product BEEM SB 100
Led Options 1100lm
4000K LED
1500lm
4000K LED
1000lm
3000K LED
1400lm
3000K LED
Control ND
Non dimming
HD
DALI dimming
Diffuser Option O
Opal PMMA
Finish RAL9016
3 hour integrated self contained
conversion kit with green LED indicator
ED
DALI emergency
EE
EC
50.000hrs
IP Rating
IP20
Catalogue No BEEMSB10015K4KHDO9016
BEEM SB 100 recessed downlighter offers powerful LED illumination
in a 108mm diameter luminaire size. Manufactured from die cast
aluminium with easy install springs designed for simple installation,
the unique design of this downlighter incorporates a recessed frosted
diffuser for optimum light distribution. BEEM SB 100 is available
lumen outputs and colour temperatures suitable for all lighting needs.
BEEM offers energy efficient lighting with carbon reduction to all
reception, breakout, amenity and circulation spaces.
• Highly efficient injection moulded
reflector
• RAL 9016 as standard
Allowance
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

151
DOWNLIGHT/ACCENT
LED
Recessed
Depth
95mm
Nominal
Size
Ø150mm
Cutout
Ø140mm
Part L2

ECA

BUILT
IN
BRITAIN
Luminaire data
LDC
Object
Installation
Project number
Date
: KFH Clerkenwell
: FD8838
: 14.12.2015
Relux1
100
200
300
400
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 475 475 475
5° 472 472 472
10° 462 462 462
15° 445 445 445
20° 422 422 422
25° 395 395 395
30° 364 364 364
35° 330 330 330
40° 294 294 294
45° 256 256 256
50° 211 211 211
55° 164 164 164
60° 118 118 118
65° 76 76 76
70° 40 40 40
75° 16 16 16
80° 7 7 7
85° 3 3 3
90° 1 1 1
cd / 1000 lm
C0 / C180
Light distribution
Beam Angle
: 94.2° C0-C180
Product BEEM SB 150
LED Options 1000lm
4000K LED
1300lm
4000K LED
1700lm
4000K LED
2100lm
4000K LED
900lm
3000K LED
1100lm
3000K LED
1600lm
3000K LED
1900lm
3000K LED
Control ND
Non dimming
HD
DALI dimming
Diffuser Option O
Opal PMMA
Finish RAL9016
ED
DALI emergency
EE
EC
50.000hrs
IP Rating
IP20
reflector
Allowance
BEEMSB150
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

153
DOWNLIGHT/ACCENT
LED
Recessed
Depth
95mm
Nominal
Size
Ø185mm
Cutout
Ø172mm
Part L2

ECA

BUILT
IN
BRITAIN
Luminaire data
FUTURE Designs Limited, BEEM185/SB (BEEM185/2400/4K/SB)
LDC
Object
Installation
Project number
Date
: 9-10 Philpot lane
: FD8341
: 12.10.2015
FOR CATALOGUE
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 303 303 303
5° 301 300 301
10° 294 293 294
15° 283 283 283
20° 269 268 269
25° 251 251 251
30° 231 231 231
35° 209 209 209
40° 185 185 185
45° 159 159 159
50° 131 132 131
55° 105 104 105
60° 79 79 79
65° 54 55 54
70° 33 34 33
75° 16 16 16
80° 6 6 6
85° 2 2 2
90° 0 0 0
cd / 1000 lm
C0 / C180 C90 / C270
Order number : BEEM185/2400/4K/SB
Luminaire name : BEEM185/SB
Equipment : 1 x LED 24W / 4000K / 2400 lm
File name : BEEM185-2400-4K-SB.ldt
Light distribution
Beam Angle
: sym. to C0-C180 / C90-C270
: 92.6° C0-C180
92.8° C90-C270
Product BEEM SB 185
Led Options 1200lm
4000K LED
1600lm
4000K LED
2100lm
4000K LED
3400lm
4000K LED
1100lm
3000K LED
1500lm
3000K LED
2100lm
3000K LED
3600lm
3000K LED
Control ND
Non dimming
HD
DALI dimming
Diffuser Option O
Opal PMMA
Finish RAL9016
ED
DALI emergency
EE
EC
50.000hrs
IP Rating
IP20
reflector
Allowance
BEEMSB185
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

154
LED
Recessed
Depth
95mm
Nominal
Size
Ø220mm
Cutout
Ø206mm
Part L2

ECA

BUILT
IN
BRITAIN
Product BEEM SB 220
Led Options 1700lm
4000K LED
2300lm
4000K LED
3200lm
4000K LED
4100lm
4000K LED
5100lm
4000K LED
1500lm
3000K LED
2000lm
3000K LED
2900lm
3000K LED
3700lm
3000K LED
4500lm
3000K LED
Control ND
Non dimming
HD
DALI dimming
Diffuser Option O
Opal PMMA
Finish RAL9016
ED
DALI emergency
EE
EC
50.000hrs
IP Rating
IP20
Luminaire data
LDC
Object
Installation
Project number
Date
: 9-10 Philpot lane
: FD8341
: 12.10.2015
FOR CATALOGUE
100
200
300
400
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 430 430 430
5° 427 428 427
10° 419 419 419
15° 406 406 406
20° 388 388 388
25° 365 365 365
30° 339 339 339
35° 309 310 309
40° 277 277 277
45° 242 242 242
50° 204 205 204
55° 167 168 167
60° 132 132 132
65° 98 99 98
70° 67 67 67
75° 39 39 39
80° 16 16 16
85° 6 5 6
90° 1 1 1
cd / 1000 lm
C0 / C180 C90 / C270
Luminaire efficacy : 93 lm/W (A40)
Light distribution
Beam Angle
: sym. to C0-C180 / C90-C270
: 97.1° C0-C180
97.2° C90-C270
reflector
Allowance
BEEMSB220
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

DOWNLIGHT/ACCENT
155
futuredesigns.co.uk

157
DOWNLIGHT/ACCENT
LED
Depth
240mm
Nominal
Size
Ø200mm
Part L2

ECA

BUILT
IN
BRITAIN
Product BEEM RD SM
LED Options 1100lm
3000K/4000K LED
2000lm
3000K/4000K LED
3000lm
3000K/4000K LED
5000lm
3000K/4000K LED
Control ND
Non dimming
HD
DALI dimming
Diffuser Option OP
Opal polycarbonate
CP
Clear polycarbonate
EG
Etched glass
CG
Clear glass
CEG
Centre etched glass
Finish BL
Black
WH
White
SG
Silver grey
ED
DALI emergency
EC
EE
50.000hrs
IP Rating
IP44
To Specify: Ø200mm surface mounted downlighter to suit 2000lumen cool white LED, DALI digital
dimming control gear. Catalogue No BEEMRD2002K4KHDSAWHSM
Luminaire data
FUTURE Designs Limited, BEEM/SM (BEEM-2K-4K-SM)
LDC
Object
Installation
Project number
Date
: KFH Clerkenwell
: FD8838
: 14.12.2015
Relux1
200
400
600
800
1000
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 1128 1128 1128
5° 1117 1112 1119
10° 1070 1061 1080
15° 973 970 997
20° 823 832 858
25° 632 653 671
30° 439 465 475
35° 280 303 310
40° 161 178 183
45° 78 90 93
50° 31 38 40
55° 12 15 16
60° 6 8 8
65° 5 5 5
70° 5 5 5
75° 4 4 4
80° 3 3 3
85° 2 2 2
90° 1 1 2
cd / 1000 lm
C0 / C180 C90 / C270
Order number : BEEM-2K-4K-SM
Luminaire name : BEEM/SM
File name : BEEM-2K-4K-SM.ldt
Light distribution
Beam Angle
: asymmetric
: 26.8° C0
27.4° C90
27.7° C180
27.4° C270
BEEM RD SM Ø200m surface mounted downlighter offers powerful LED
illumination adding brilliance to any space. BEEM is available in a wide
range of RAL finishes and is designed for simple installation as surface
mounted or onto besa fixings. BEEM is available in various lumen
outputs and colour temperatures suitable for all lighting needs. BEEM
offers energy efficient lighting and carbon reduction to all environments
and is suitable for office, accent and perimeter lighting, reception,
breakout and circulation spaces.
• Surface mounted
Allowance
BEEMRDSM
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

BEEMSM
158
futuredesigns.co.uk

DOWNLIGHT/ACCENT
BEEMSB
159
futuredesigns.co.uk

160
LED
Depth
150mm
Nominal
Size
100mm x
100mm
Nominal
Size
145mm x
145mm
Part L2

ECA

BUILT
IN
BRITAIN
Product BEEM SQ SM
3000K/4000K LED
2000lm
3000K/4000K LED
Control ND
Non dimming
HD
DALI dimming
HS
Switch dimming
HX
DSI dimming
Diffuser ET
Polar frost
Mounting SM
Surface mounted
SMB
Surface Mounted BESA
Size 100
100mmx100mm
Remote control gear
145
145mmx145mm
Finish WH
RAL9010
Emergency Option EE
EC
CRI>80 LED Efficacy
146 lm/W 50.000hrs
IP Rating
IP20
To Specify: 145mm x 145mm white surface luminaire to suit 1100lumen cool white LED, DALI digital
dimming control gear horizontal trim. Catalogue No BEEMSQ14511K4KHDETSMWH
Small yet powerful, BEEM SQ SM surface downlighter offers powerful
LED illumination in a compact sizes of 145mm x 145mm and 100mm x
100mm. The downlighter adds a sparkle to any space and is available
in a wide range of RAL finishes. Designed for simple installation as
surface mounted or onto besa fixings. BEEM SQ SM is available in
various lumen outputs and colour temperatures suitable for all lighting
needs. BEEM offers an energy efficient lighting and carbon reduction
to all environments and is suitable for areas including office, accent and
perimeter lighting, reception, breakout and circulation spaces.
• Surface mounted
Allowance
• Zhaga replaceable LED moduleLuminaire data
FUTURE Designs Limited, BEEM/SQ/O/145/SM (BEEM/SQ/O/145/2000/SM)
LDC
Object
Installation
Project number
Date
: KFH Clerkenwell
: FD8838
: 14.12.2015
Relux1
100
200
300
400
500
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 494 494 494
5° 491 503 491
10° 473 484 473
15° 483 465 483
20° 427 443 427
25° 368 373 368
30° 277 277 277
35° 197 191 197
40° 131 134 131
45° 118 111 118
50° 92 92 92
55° 69 69 69
60° 53 53 53
65° 39 40 39
70° 28 28 28
75° 17 18 17
80° 9 10 9
85° 3 3 3
90° 1 0 1
cd / 1000 lm
C0 / C180 C90 / C270
Order number : BEEM/SQ/O/145/2000/SM
Luminaire name : BEEM/SQ/O/145/SM
File name : BEEM-SQ-O-145-2000.ldt
Light distribution
Beam Angle
: sym. to C0-C180 / C90-C270
: 63.0° C0-C180
62.7° C90-C270
BEEMSQSM
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

DOWNLIGHT/ACCENT
161
futuredesigns.co.uk

162
LED
Recessed
Depth
130mm
Nominal
Size
200mm x
200mm
Cutout
185mm x
185mm
Part L2

ECA

BUILT
IN
BRITAIN
Product KAR 1M
LED Options Narrow Beam 2400lm
3000K LED
2500lm
4000K LED
LED Options Medium Beam 2400lm / 3100lm
3000K LED
2200lm / 3280lm
4000K LED
LED Options Wide Beam 2400lm / 3100lm
3000K LED
2200lm / 3280lm
4000K LED
Control ND
Non dimming
HD
DALI dimming
Beam Angle NB
Narrow beam
MB
Medium beam
WB
Wide beam
Diffuser Option FG
Frosted safety glass pane
CG
Clear safety glass pane
Back Box & Colour Options BB
Black back box
WH
RAL9016
SG
RAL9006
50.000hrs
LED Efficacy 118lm/W
50.000hrs
Complete with external power
supply (converter) with connector
IP Rating
IP23
To Specify: 200mm x 200mm luminaire to suit narrow beam 2400lumen 3000K white LED, DALI digital
dimming. White luminaire and backbox. Catalogue No KAR24K3KHDNBBBWH1M
Luminaire data
SPITTLER, KA16 EB LED (8163161171430)
LDC
Object
Installation
Project number
Date
: St Andrews House
: 3rd Floor Rev B
: FD8668
: 16.12.2015
Relux1
1000
2000
3000
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 3155 3155 3155
5° 2904 2904 2904
10° 2255 2255 2255
15° 1360 1360 1360
20° 677 677 677
25° 410 410 410
30° 340 340 340
35° 285 285 285
40° 84 84 84
45° 3 3 3
50° 2 2 2
55° 1 1 1
60° 1 1 1
65° 1 1 1
70° 1 1 1
75° 1 1 1
80° 1 1 1
85° 1 1 1
90° 1 1 1
cd / 1000 lm
C0 / C180
Order number : 8163161171430
Luminaire name : KA16 EB LED
Dimensions : L 120 mm x W 120 mm x H 0.0 mm
Light distribution
Beam Angle
: 27.6° C0-C180
Luminaire data
LDC
Object
Installation
Project number
Date
: St Andrews House
: 3rd Floor Rev B
: FD8668
: 16.12.2015
Relux1
400
800
1200
1600
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 1757 1757 1757
5° 1689 1689 1689
10° 1520 1520 1520
15° 1270 1270 1270
20° 963 963 963
25° 654 654 654
30° 440 440 440
35° 261 261 261
40° 110 110 110
45° 16 16 16
50° 2 2 2
55° 1 1 1
60° 1 1 1
65° 1 1 1
70° 1 1 1
75° 1 1 1
80° 1 1 1
85° 1 1 1
90° 1 1 1
cd / 1000 lm
C0 / C180
Order number : 8163171261430
Light distribution
Beam Angle
: 42.8° C0-C180
Gimbal style luminaire that incorporates LED modules to harness the
benefits of reduced energy consumption. KAR is a flexible system primarily
designed for reception, feature, art, retail and restaurant lighting. The
ability to aim light means that specific elements within a space can be
highlighted to create focal points. Designed from die cast aluminium with
super efficient facetted reflector which ensures good distribution of light
with added brilliance. KAR can be supplied as single, twin and three lamp
modules, along with a range of beam angles, giving a depth of versatility to
any scheme design.
• Tool less installation
Allowance
KAR1M
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

163
DOWNLIGHT/ACCENT
LED
Recessed
Depth
130mm
Nominal
Size
200mm x
380mm
Cutout
185mm x
365mm
Part L2

ECA

BUILT
IN
BRITAIN
Product KAR 2M
3000K LED
5000lm
4000K LED
3000K LED
5000lm / 6560lm
4000K LED
3000K LED
5000lm / 6560lm
4000K LED
Control ND
Non dimming
HD
DALI dimming
Beam Angle NB
Narrow beam
MB
Medium beam
WB
Wide beam
Diffuser Option FG
CG
Black back box
WH
RAL9016
SG
RAL9006
50.000hrs
50.000hrs
IP Rating
IP23
dimming. White luminaire and backbox. Catalogue No KAR48K3KHDNBBBWH2M
Luminaire data
LDC
Object
Installation
Project number
Date
: St Andrews House
: 3rd Floor Rev B
: FD8668
: 16.12.2015
Relux1
1000
2000
3000
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 3155 3155 3155
5° 2904 2904 2904
10° 2255 2255 2255
15° 1360 1360 1360
20° 677 677 677
25° 410 410 410
30° 340 340 340
35° 285 285 285
40° 84 84 84
45° 3 3 3
50° 2 2 2
55° 1 1 1
60° 1 1 1
65° 1 1 1
70° 1 1 1
75° 1 1 1
80° 1 1 1
85° 1 1 1
90° 1 1 1
cd / 1000 lm
C0 / C180
Order number : 8163262171430
Light distribution
Beam Angle
: 27.6° C0-C180
Luminaire data
LDC
Object
Installation
Project number
Date
: St Andrews House
: 3rd Floor Rev B
: FD8668
: 16.12.2015
Relux1
400
800
1200
1600
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 1880 1880 1880
5° 1830 1830 1830
10° 1648 1648 1648
15° 1345 1345 1345
20° 952 952 952
25° 589 589 589
30° 397 397 397
35° 296 296 296
40° 79 79 79
45° 4 4 4
50° 2 2 2
55° 1 1 1
60° 1 1 1
65° 1 1 1
70° 1 1 1
75° 1 1 1
80° 1 1 1
85° 1 1 1
90° 1 1 1
cd / 1000 lm
C0 / C180
Order number : 8163272171430
Light distribution
Beam Angle
: 40.3° C0-C180
any scheme design.
Allowance
KAR2M
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

164
LED
Recessed
Depth
130mm
Nominal
Size
200mm x
540mm
Nominal
Size
185mm x
525mm
Part L2

ECA

BUILT
IN
BRITAIN
Product KAR 3M
3000K LED
7530lm
4000K LED
3000K LED
7530lm / 9840lm
4000K LED
3000K LED
7530lm / 9840lm
4000K LED
Control ND
Non dimming
HD
DALI dimming
Beam Angle NB
Narrow beam
MB
Medium beam
WB
Wide beam
Diffuser Option FG
CG
Black back box
WH
RAL9016
SG
RAL9006
50.000hrs
50.000hrs
IP Rating
IP23
dimming. White lumianire and backbox. Catalogue No KAR72K4KHDNBBBWH3M
Luminaire data
LDC
Object
Installation
Project number
Date
: St Andrews House
: 3rd Floor Rev B
: FD8668
: 16.12.2015
Relux1
400
800
1200
1600
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 1880 1880 1880
5° 1830 1830 1830
10° 1648 1648 1648
15° 1345 1345 1345
20° 952 952 952
25° 589 589 589
30° 397 397 397
35° 296 296 296
40° 79 79 79
45° 4 4 4
50° 2 2 2
55° 1 1 1
60° 1 1 1
65° 1 1 1
70° 1 1 1
75° 1 1 1
80° 1 1 1
85° 1 1 1
90° 1 1 1
cd / 1000 lm
C0 / C180
Order number : 8163373171430
Light distribution
Beam Angle
: 40.3° C0-C180
Luminaire data
LDC
Object
Installation
Project number
Date
: St Andrews House
: 3rd Floor Rev B
: FD8668
: 16.12.2015
Relux1
1000
2000
3000
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 3155 3155 3155
5° 2904 2904 2904
10° 2255 2255 2255
15° 1360 1360 1360
20° 677 677 677
25° 410 410 410
30° 340 340 340
35° 285 285 285
40° 84 84 84
45° 3 3 3
50° 2 2 2
55° 1 1 1
60° 1 1 1
65° 1 1 1
70° 1 1 1
75° 1 1 1
80° 1 1 1
85° 1 1 1
90° 1 1 1
cd / 1000 lm
C0 / C180
Order number : 8163363171430
Light distribution
Beam Angle
: 27.6° C0-C180
any scheme design.
Allowance
KAR3M
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

DOWNLIGHT/ACCENT
165
futuredesigns.co.uk

167
DOWNLIGHT/ACCENT
LED
Height
225mm
Nominal
Size
Ø100mm
Length
270mm
Part L2

ECA

BUILT
IN
BRITAIN
Product ART T1
LED Options 3400lm
3000K/4000K LED
4600lm
3000K/4000K LED
Control ND
Non dimming
HD
DALI dimming
Beam Angle MB
Medium beam 24°
WB
Wide beam 38°
Attachments HCA
Steel honeycomb
HCA
White honeycomb
Colour Options WH
White
BL
Black
Technical Details CRI>80
CRI>90 available
LED Efficacy 100 lm/W
50.000hrs
Rotatable & tiltable head
320° vertical & 90° horizontal
IP Rating
IP20
Track Please specify track length in meters
Track Length 2MBL
2000m black
Trimmed &
trimless
2MWH
2000m white
Trimmed &
trimless
3MBL
3000m black
Trimless only
3MWH
3000m white
Trimless only
Track Style TL
Trimless track for surface & suspended
TR
Track with trim for recessed mounting
Track Connectors TS
Straight connection
TX
4way track con-
nector
TF
Track end conec-
tion
TC
Corner track con-
nector
To Specify: ART track luminaire to suit medium beam 3400lumen 4000K white LED, DALI digital dimming.
White luminaire and steel honeycomb. Catalogue No ARTT134K4KMBHDWH
Luminaire data
LEDS C4, Proyector led ACTION 10º SPOT (35-3932)
LDC
2000
4000
6000
8000
10000
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 10526 10526 10526
5° 5300 5190 5300
10° 1186 1292 1186
15° 530 520 530
20° 453 438 453
25° 388 375 388
30° 343 336 343
35° 290 290 290
40° 59 67 59
45° 21 21 21
50° 14 13 14
55° 10 10 10
60° 9 8 9
65° 3 3 3
70° 2 2 2
75° 1 1 1
80° 0 0 0
85° 0 0 0
90° 0 0 0
cd / 1000 lm
C0 / C180 C90 / C270
Manufacturer : LEDS C4
Order number : 35-3932
Luminaire name : Proyector led ACTION 10º SPOT
Equipment : 1 x ACTION 10º SPOT / 2026.75 lm
File name : 35-3932.ldt
Light distribution
Beam Angle
: sym. to C0-C180 / C90-C270
: 10.1° C0-C180
-- C90-C270
Luminaire data
LEDS C4, Downlight led 40.9W 38º 4000K (35-2205-14-37)
LDC
400
800
1200
1600
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 1691 1691 1691
5° 1568 1570 1568
10° 1312 1315 1312
15° 1026 1030 1026
20° 740 761 740
25° 569 579 569
30° 462 465 462
35° 353 350 353
40° 205 214 205
45° 39 49 39
50° 12 14 12
55° 11 12 11
60° 11 10 11
65° 7 7 7
70° 4 4 4
75° 2 2 2
80° 1 1 1
85° 0 0 0
90° 0 0 0
cd / 1000 lm
C0 / C180 C90 / C270
Order number : 35-2205-14-37
Luminaire name : Downlight led 40.9W 38º 4000K
Equipment : 1 x L3296 40.9W 80 4000K / 2637.97 lm
File name : 35-2205-14-37.ldt
Light distribution
Beam Angle
: sym. to C0-C180 / C90-C270
: 36.3° C0-C180
36.9° C90-C270
ART track light combines innovative LED technology and modern design
within a quality die cast aluminium luminaire complete with super efficient
reflector and clear glass. With easy to manoeuvre heads giving 320°
rotation and 90° tilt allows light to be aimed at specific elements within
a space, highlighting features and artefacts. Available with a secure
universal 3 phase adaptor for easy track mounting. Track system and
connectors open up more possibilities for design, these include recessed,
surface and suspended along with a variety of connections.
ART features a variety of beam angles, lumen outputs and colour
temperatures giving a range of options for any scheme design. With the
benefits of long life span for reduced maintenance as well as energy and
carbon savings. ART is a flexible system primarily designed for reception,
feature, art, retail and restaurant lighting.
ARTT1
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

168
LED
Height
305mm
Nominal
Size
Ø1mm
Length
252mm
Part L2

ECA

BUILT
IN
BRITAIN
Luminaire data
LEDS C4, Proyector BON TUBE MEDIUM 30º 25.9W (35-5414)
LDC
500
1000
1500
2000
2500
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 2865 2865 2865
5° 2697 2701 2697
10° 2112 2133 2112
15° 1418 1429 1418
20° 765 806 765
25° 444 443 444
30° 370 360 370
35° 174 200 174
40° 25 31 25
45° 10 10 10
50° 8 8 8
55° 5 5 5
60° 3 3 3
65° 2 2 2
70° 1 1 1
75° 0 0 0
80° 0 0 0
85° 0 0 0
90° 0 0 0
cd / 1000 lm
C0 / C180 C90 / C270
Luminaire name : Proyector BON TUBE MEDIUM 30º
25.9W
Light distribution
Beam Angle
: sym. to C0-C180 / C90-C270
: 29.8° C0-C180
29.9° C90-C270
Product ART T2
LED Options 2670lm
3000K/4000K LED
1540lm
3000K/4000K LED CRI>90
2020lm
3000K/4000K LED CRI>90
Control ND
Non dimming
HD
DALI dimming
Beam Angle NB
Narrow beam 15°
MB
Medium beam 30°
WB
Wide beam 55°
Colour Options WH
White
BL
Black
CRI>90 available
50.000hrs
IP Rating
IP20
Track Length 2MBL
2000m black
Trimmed &
trimless
2MWH
2000m white
Trimmed &
trimless
3MBL
3000m black
Trimless only
3MWH
3000m white
Trimless only
Track Style TL
TR
Track Connectors TS
Straight connection
TX
4way track con-
nector
TF
Track end conec-
tion
TC
Corner track con-
nector
To Specify: ART track luminaire to suit medium beam 1540lumen 4000K white LED, DALI digital dimming.
White luminaire. Catalogue No ARTT215K4KMBHDWH
reflector. With easy to manoeuvre heads giving 355° rotation and 90° tilt
allows light to be aimed at specific elements within a space, highlighting
features and artefacts. Available with a secure universal 3 phase adaptor
for easy track mounting. Track system and connectors open up more
possibilities for design, these include recessed, surface and suspended
along with a variety of connections.
ARTT2
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

169
DOWNLIGHT/ACCENT
LED
Height
237mm
157mm
Head
Ø115mm
Ø63mm
Depth
136mm
82mm
Part L2

ECA

BUILT
IN
BRITAIN
LEDS C4, Proyector MACH 3 840 30º 53.2W (35-3947)
LDC
500
1000
1500
2000
2500
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 2865 2865 2865
5° 2697 2701 2697
10° 2112 2133 2112
15° 1418 1429 1418
20° 765 806 765
25° 444 443 444
30° 370 360 370
35° 174 200 174
40° 25 31 25
45° 10 10 10
50° 8 8 8
55° 5 5 5
60° 3 3 3
65° 2 2 2
70° 1 1 1
75° 0 0 0
80° 0 0 0
85° 0 0 0
90° 0 0 0
cd / 1000 lm
C0 / C180 C90 / C270
Luminaire name : Proyector MACH 3 840 30º 53.2W
Light distribution
Beam Angle
: sym. to C0-C180 / C90-C270
: 29.8° C0-C180
29.9° C90-C270
Luminaire data
LEDS C4, Proyector MACH-3 38W 3000K (35-3940)
LDC
2000
4000
6000
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 C90 C180
0° 6121 6121 6121
5° 4829 4792 4829
10° 2096 2105 2096
15° 910 899 910
20° 545 537 545
25° 434 429 434
30° 372 363 372
35° 195 198 195
40° 30 31 30
45° 5 5 5
50° 4 4 4
55° 4 3 4
60° 5 5 5
65° 1 1 1
70° 0 0 0
75° 0 0 0
80° 0 0 0
85° 0 0 0
90° 0 0 0
cd / 1000 lm
C0 / C180 C90 / C270
Luminaire name : Proyector MACH-3 38W 3000K
Equipment : 1 x 35-3940-60-DU / 2557.5 lm
Light distribution
Beam Angle
: sym. to C0-C180 / C90-C270
: 16.5° C0-C180
16.4° C90-C270
Allowance
reflector. With easy to manoeuvre heads giving 355° rotation and 90° tilt
allows light to be aimed at specific elements within a space, highlighting
features and artefacts. Available with a secure universal 3 phase adaptor
for easy track mounting. Track system and connectors open up more
possibilities for design, these include recessed, surface and suspended
along with a variety of connections.
Product ART T3
LED Options ART T3 3460lm (DALI)
3000K/4000K LED
2960lm
3000K/4000K LED CRI>90
LED Options ART T3 MINI
Non Dimming Only
1100lm
3000K/4000K LED
1000lm
3000K/4000K LED CRI>90
Control ND
Non dimming
HD
DALI dimming
Beam Angle NB
Narrow beam 15°
MB
Medium beam 30°
WB (mini)
Wide beam 40°
WB
Wide beam 55°
Colour Options WH
White
BL
Black
CRI>90 available
50.000hrs
IP Rating
IP20
Track Length 2MBL
2000m black
Trimmed &
trimless
2MWH
2000m white
Trimmed &
trimless
3MBL
3000m black
Trimless only
3MWH
3000m white
Trimless only
Track Style TL
TR
Track Connectors TS
Straight connection
TX
4way track con-
nector
TF
Track end conec-
tion
TC
Corner track con-
nector
To Specify: ART track luminaire to suit medium beam 3460lumen 4000K white LED, non dimming. White
luminaire. Catalogue No ARTT334K4KMBNDWH
ARTT3
HOWTOSPECIFY
LIGHT5K4KNDETE3
Luminaire
LumenOutput
LEDColour
Driver
Options
Emergency
futuredesigns.co.uk

BESPOKE
BESPOKE 172/ LANTERN
176/ GRAIN OF RICE
178/ VANE CRUCIFORM
180/ HELIX
181/ ICE
184/ HALO
187/ HALO TICKERTAPE
188/ HASHTAG
190/ STERN
191/ KUBE
192/ VANE JIGSAW
193/ VIVID & GLAZE
194/ VANE VERTA
196/ SHINE
197/ HAL CIRC

LANTERN
172
futuredesigns.co.uk

BESPOKE
173
A contemporary lighting raft made from illuminated
cubes that create a focal point at this executive
space. FUTURE Designs brought the design to life.
Producing a super efficient, ultra flexible lighting
system to meet the brief aesthetically but also in
terms of performance & delivery. futuredesigns.co.uk

LANTERN
The render captures the detailing of the luminaire. Allowing critical dimensions & aesthetics to be checked.
3D models and exploded view to test fit and ease of installation.A series of light tests were performed using a mock
up of the largest cube which could be divided into
various sizes & depths to cater for every eventuality.
LED light engines were tested within the light boxes
to check.
Every part bespoke and handmade.
174
LED
• 166,500mm flexible LED mounted
• to individual aluminium heatsink
• 83,250mm of 2700K and 83,250mm 5000K
LED working in
• pairs
• 6660no high efficiency LED chips
METALS
• 20mm solid aluminium plate fins
• Anodised Anolok 549 bronze
FIXINGS
• Invisible
PLASTICS
• 43 separate bespoke diffuser cubes
• Every diffuser cube individually
• controllable with dimming and colour change
WEIGHT
• 1007kg
CARE & ATTENTION TO DETAIL - Incalculable

BESPOKE
Rendered Image
175
futuredesigns.co.uk

BESPOKE
GRAINOFRICE
177
Using a series of LED modules & LED track lighting
to illuminate this extraordinary sculpture. The
lighting system worked in harmony to provide
general lighting along with accent lighting to high
light and add definition to the piece.

BESPOKE
Dramatic shapes can be created from VANE. The
cruciform shape can be formed from different
angles and lengths to create striking features
within a space.
179
futuredesigns.co.uk

HELIX
A majestic LED pendant lighting
system formed by a series of
luminaires around a central
spine. Designed to suit feature
spaces including receptions,
atria and stairways
Rendered Image
180
futuredesigns.co.uk

BESPOKE
ICEICE LED frosted glass pendants
can be supplied as singular
drops to form rafts of light.
The pendants can be supplied in
various lengths.
181
futuredesigns.co.uk

BESPOKE
183
futuredesigns.co.uk

BESPOKE
185
futuredesigns.co.uk

HALO can be supplied as suspended or recessed. The luminaire
can be supplied in different diameters and depths. Uplight can be
supplied as white or colour change.
186
futuredesigns.co.uk

BESPOKE
HALOTICKERTAPE
HALO TICKERTAPE is designed to provide general lighting
with signage. Incorporating LED uplight and downlight with
a tickertape system.
187
futuredesigns.co.uk

HASHTAG
188
futuredesigns.co.uk

BESPOKE
HASHTAG is specifically designed for each installation. Tubular profiles form the
‘HASHTAG’ design. With modules providing direct, uplight and a mixture of both.
The system can be supplied with junctions or as versatile singular modules which
can be located at various heights allowing unique shapes and styles to be made.
189
futuredesigns.co.uk

STERN
STERN large scale luminaire
designed for spaces with high
ceilings. The luminaire can be
supplied up to 1.5m x 1.5m.
190
futuredesigns.co.uk

BESPOKE
1500
KUBE
Luminaire Design
Prototype
KUBE light box
designed specifically
for feature spaces
including receptions,
break-out spaces
and meeting areas.
The luminaire can be
supplied as tuneable
white allowing the light
to adapt to different
times of day or events.
191
futuredesigns.co.uk

VANEJIGSAW
Dramatic shapes can be
created from VANE. Jigsaw
shapes can be formed from
different angles, junctions
and lengths to create
striking features within
a space. Coloured infill
sections can be used to
add a splash of colour to a
scheme.
192
futuredesigns.co.uk

BESPOKE
VIVID&GLAZE
Compelling effects and vibrant feature
lighting created using VIVID & GLAZE
193
futuredesigns.co.uk

VANEVERTA
Vertical drop pendant
luminaire suitable for
feature and general
lighting. VANE
VERTA is available in
various lengths and
can be finished as
anodised or any RAL
colour.
194
futuredesigns.co.uk

BESPOKE
195
futuredesigns.co.uk

SHINE
SHINE is a blade of
indirect suspended
light. 23m of
continuous highly
polished steel forms
this incredible
luminaire. Designed
specifically to fully
illuminate impressive
reception spaces.
196
futuredesigns.co.uk

BESPOKE
HAL CIRC suspended luminaire system supplied
in continuous modules to form a circular lighting
installation. Available as indirect & direct.
HAL CIRC 197
futuredesigns.co.uk

INDEX
199
futuredesigns.co.uk
INDEX

INTRODUCTION
GUIDETOLIGHT
200
futuredesigns.co.uk
INTRODUCTION
2-9
GUIDE TO LIGHT
11-40
RECESSED
41-84
SUSPENDED /
SURFACE
85-132
DOWNLIGHT &
ACCENT
133-170
BESPOKE
171-198
2/ Introduction
4/ A Biref History of Light
6/ Sustainability
8/ Research & Development
9/ Design
13/ Lighting Design Considerations
12/ Light Planning Quick Reference
14/ Luminaire Types
15/ Lighting People & Tasks
16/ Technical Considerations
17/ LED Specification
18/ Benefits of LED
19/ Case Study PLL to LED
20/ Case Study Linear T5 to LED
21/ Case Study T8 to LED
22/ Power Over Ethernet
23/ ECA, LEED, BREEAM & Efficacies
24/ Emergency Lighting
25/ Emergency Positioning
27/ Emergency Planning
28-29/ Photometry Basics
30/ Light Level Recommendations
31/ Data Centre for Lighting
32/ LED Module Guide
33/ Fluorescent Lamp Guide
34-37/ Lighting Glossary
39/ Ingress & Impact Protection

INDEX
SUSPENDED/SURFACE
RECESSED
201
futuredesigns.co.uk
86/ SHEER
89/ LATERUL
94/ VANE
99/ ANGOL
100/ VANE/SL
103/ SMART
104/ SLEAK
106/ HAL AIR
108/ HAL
113/ HUB
114/ POD SQ
117/ POD RD
118/ GLAZE
123/ VIVID
124/ SKYLINE
123/ AMADA
128/ STRAIT F1
131/ STRAIT F2
42/ GLOS
49/ GLOS LINEAR
54/ EXEMPLAR
59/ AXCEL
62/ EXEMPLAR LINEAR
68/ VANE/R
74/ EDGE
77/ SEEL
78/ BEL
82/ ELED
83/ EXIT

DOWNLIGHTS
202
futuredesigns.co.uk
INTRODUCTION
2-9
GUIDE TO LIGHT
11-40
RECESSED
41-84
SUSPENDED /
SURFACE
85-132
DOWNLIGHT &
ACCENT
133-170
BESPOKE
171-198
135/ BEEM RD 100
138/ BEEM RD 130
141/ BEEM RD 196
142/ BEEM SQ 100
145/ BEEM SQ 150
146/ BEEM SQ 180
149/ BEEM RD 105
150/ BEEM SB 100
151/ BEEM SB 150
153/ BEEM SB 185
154/ BEEM SB 220
157/ BEEM RD SM
160/ BEEM SQ SM
162-164 KAR
166/ ART T1 LED
168/ ART T2 LED
169/ ART T3 LED

INDEX
BESPOKE
203
172/ LANTERN
176/ GRAIN OF RICE
178/ VANE
180/ HELIX
181/ ICE
184 / HALO
187/ HALO TICKER
188/ HASHTAG
190/ STERN
191/ KUBE
192/ VANE JIGSAW
193/ VIVID & GLAZE
194/ VANE VERTA
196/ SHINE
197/ HAL CIRC
TAPE
CRUCIFORM

DESIGNS
204
Headquarters
The Lighthouse
Fircroft Way
Edenbridge
Kent TN8 6EJ
HQ +44 (0)1732 867420
LDN +44 (0)20 7515 3763
London Office
Unit 401
Wharfside Point Sth
4 Preston Road
London E14 9EL
Dubai Headquarters
Office 4C Level 4,
Union National Bank
Building,
Dubai,
@FUTUREdesigns
FUTURE Designs Ltd
lightthefuture
Future Designs
futuredesigns.co.ukWWW
FUTURE Designs

FUTURE Designs
Headquarters
The Lighthouse
Fircroft Way
Edenbridge
Kent TN8 6EJ
HQ +44 (0)1732 867420
LDN +44 (0)20 7515 3763
futuredesigns.co.uk
London Office
Unit 401
Wharfside Point Sth
4 Preston Road
London E14 9EL
Dubai Headquarters
Office 4C Level 4,
Union National Bank
Building,
Dubai,

FUTURE DESIGNS LIGHTBOOK V15

More Related Content

What's hot

Similar to FUTURE DESIGNS LIGHTBOOK V15

FUTURE DESIGNS LIGHTBOOK V15