This document provides operating instructions for the Panasonic PT-LB2E data projector. It outlines how to set up the projector on a stable base, connect the power and VGA cables, turn the projector on, remove the lens cap, adjust the height and focus, operate it using a laptop or remote, and wait for cooling before disconnecting power and storing the projector.

1. Panasonic PT-LB2E Data Projector
Operating Instructions
1. Put on a stable base
2. Connect power cable cord to data projector power source
3. Connect VGA cable to laptop computer and data projector
4. Turn on data projector power switch
5. Remove projection lens cap
6. Adjust height by using wheel at the front base of projector
7. Adjust focus as necessary
8. Operate data projector by using laptop computer mouse or data
projector remote control
9. Once DP turned off wait until cooling fan stops before
disconnecting power supply and packing projector away