fixed loader

1. Recovery
2. Genuine status
3. Questions and answers
4. UEFI motherboards
5. Server 2012 compatibility and Windows 8
6. Checksums
7. Changes
8. Arguments
9. Extra
##########################################################################
# 1 - Recovery
##########################################################################
Is Windows failing to boot after you installed the loader? Just do the following
.
* Boot up the PC from your Windows installation disk
* Press and hold SHIFT and then press F10
* Input "bootsect.exe /nt60 SYS /force" (without quotes)
* Restart the PC
Note: If the above doesn't fix your boot issue then use the command "bootsect.ex
e /nt60 ALL /force" instead. Just make sure you remove all USB flash drives befo
re you use the command.
Alternatively try holding the 'R' key after your BIOS screen. If you time it rig
ht then you'll see a boot menu. From the menu select to boot without a SLIC.
##########################################################################
# 2 - Genuine status
##########################################################################
Have you installed the loader but you're not genuine? Just check the following.
* Check the details line contains "v2.1" or "v2.2"
* Try to validate online with Internet Explorer at http://www.microsoft.com/genu
ine/validate/
Note: If the details line doesn't read v2.1 or v2.2 then go to the advanced tab,
select to disable type 4 memory and reinstall the loader. If that doesn't work
then use the legacy mode instead.
##########################################################################
# 3 - Questions and answers
##########################################################################
Q. The loaders status says "Modified - Uninstall other cracks", what do I do?
A. You can either find a way to uninstall the other cracks, download WAT Fix or
format. http://forums.mydigitallife.info/threads/26994
Q. I installed the loader and I'm still not activated, so what do I do now?
A. Go to the loaders advanced options tab and select to either either disable ty
pe 4 memory or use the legacy mode, then press install and reboot when prompted.
You may also need to select the option to ignore the systems existing SLIC and/
or revalidate online.
Q. The loaders status says "Unsupported partition table", why is this?
A. You're either using GPT on a UEFI motherboard or you've got a locked OEM part
ition. Both problems can be fixed by fully formatting your entire hard drive.
Q. I received the error message "Error finding your systems active partition", w
hat do I have to do?
A. You need to format the whole hard drive with a program like Active@ Kill Disk
. This issue is caused by your locked OEM partition. http://software.lsoft.net/b
oot-cd-iso.zip
Q. I received the error message "Failed to add loader to the boot code", what do
I have to do?
A. Disable any system protection. Some types of software block the loader applic
ation from installing to the boot code.
Q. I've used a version of the loader before and it failed to work, what do I hav
e to do?
A. If you previously used bootsect to get back into Windows then you first need
to press uninstall, reboot and then install the newest version of the loader.
Q. I've previously used another activation solution and I think it's modified my
systems files, can I fix it?
A. You can first try to uninstall what you originally installed and then try run

ning "sfc.exe /scannow" from command prompt as an administrator.
Q. I lose activation status after my systems been to sleep or has been in hibern
ation, can I fix it?
A. Go to the advanced options and select to disable type 4 memory, install the l
oader again and see if that cures it. If you're not cured try to disable type 3
memory instead. If it still fails try selecting the legacy setting.
Q. I installed the loader and my system hangs during the boot process, can I fix
it?
A. Go to the advanced options and select to disable type 4 memory, install the l
oader again and see if that cures it. If you're not cured try to disable type 3
memory instead. If it still fails try selecting the legacy setting.
Q. I installed the loader and rebooted but I'm not activated. The loader applica
tion displays the message "BAD SLIC SIZE" or "BAD SLIC DATA", can I fix it?
A. Uninstall the loader, power down and then boot up the system again. Go to the
applications advanced options and select to ignore the existing SLIC and then p
ress install and reboot when prompted.
Q. My systems UEFI, but I've formatted the drive to use MBR and I'm still not ac
tivated. What do I do?
A. Check your UEFI menu for secure boot and make sure it's disabled.
##########################################################################
# 4 - UEFI motherboards
##########################################################################
The loader doesn't work when the systems using GPT. The workaround is to pre-for
mat your hard drive so that it uses MBR instead.
From your BIOS select to boot the Windows DVD without UEFI, press and hold SHIFT
and then press F10 and then enter this:
diskpart
list disk
select disk 0
clean
convert mbr
create partition primary
select partition 1
format fs=ntfs quick
Boot the Windows DVD the same way you did the first time and then continue with
the installation of Windows. Once complete you can then install the loader.
##########################################################################
# 5 - Server 2012 compatibility and Windows 8
##########################################################################
Starting with the Server 2012 range Microsoft requires the RSDP to be in read on
ly memory. Because of this there are limitations.
* Systems with an existing SLIC in their BIOS should have success
* Systems with an Intel CPU may have success due to chipset lock picking
* Systems with an AMD CPU may struggle to gain activation status if they don't h
ave an existing SLIC in their BIOS
* If the loaders details line contains "v2.2" but your systems not activated the
n your systems probably not compatible
======
To convert Windows Server 2012 from an evaluation edition you must use the follo
wing command:
DISM /online /Set-Edition:<edition ID> /ProductKey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
/AcceptEula
Here's two examples:
DISM /online /Set-Edition:ServerDatacenter /ProductKey:B7RRX-RVN4P-PCPBM-89D8Y-X
4PQH /AcceptEula
DISM /online /Set-Edition:ServerStandard /ProductKey:VDNYM-JBKJ7-DC4X9-BT3QR-JHR
GY /AcceptEula
Your system may then need to reboot 2 times before the loader will work.
======
Windows 8 support may never be added to the loader because the activation system
has changed. It wouldn't be safe for me to
include what are basically retail keys as they can be blocked.
* OA 2.0 keys can be shared

* OA 3.0 keys can't be shared (This is what Windows 8 uses)
I'll make one thing clear too. There are no activators for Windows 8. Anything t
hat modifies files inside of the Windows
directory is considered hacktivation, not activation. You're NOT safe and it's N
OT permanent.
If you simply want your OS to look like Windows 8 then I'd suggest you try Windo
ws Server 2012.
http://www.win2012workstation.com/
http://www.win2008workstation.com/forum/viewtopic.php?f=54&t=2108
http://www.win2008workstation.com/forum/viewtopic.php?f=56&t=2172&start=14
##########################################################################
# 6 - Checksums
##########################################################################
File : Windows Loader.exe
CRC-32 : adf01c0f
MD4 : b786b7f1a94b637533600d31d92d49cd
MD5 : 3976bd5fcbb7cd13f0c12bb69afc2adc
SHA-1 : 3b6bdca414a53df7c8c5096b953c4df87a1091c7
##########################################################################
# 7 - Changes
##########################################################################
Version 2.2.1
* Added a new GRLDR
* Redesigned the advanced options tab and added an option to relocate the RSDP t
o the EBDA
* Added Seneca and Twinhead Windows 7 Professional keys
* Added BenQ Windows 7 Home Premium key
* Added Seneca SLIC and certificate
* Other minor tweaks and fixes
Version 2.2
* Fixed Xen detection
* Fixed a small issue with some decoded keys
* Pressing the delete key will now remove the OEM picture
Version 2.1.9
* Added a new GRLDR
* Blocked the loader from installing onto Xen as it's not supported
* Added notes about Windows Server 2012 and Windows 8 to the read me file
Version 2.1.8
* Added a new GRLDR (required to support Server 2012 operating systems)
* Added support for Windows Server 2012 Standard, Essentials, Foundation & Datac
enter
* Added support for Windows Storage Server 2012 Standard & Workgroup
* Added support for Windows MultiPoint Server 2012 Standard & Premium
* Added HEDY Windows 7 Ultimate key
* Added ByteSpeed, DakTech, Genuine C&C, INSYS, WIPRO & Zoostorm Windows 7 Profe
ssional keys
* Added ByteSpeed & INSYS Windows 7 Home Premium keys
* Added AOC & ByteSpeed Windows 7 Starter keys
* Added AOC, ByteSpeed, EXTRA Computer GmbH, Mustek, Velocity and Western Digita
l v2.1 SLIC's and certificates
* Added a Dell v2.2 SLIC to activate 2012 server editions (only recommended for
Server 2012 unless you're dual booting with Windows 7/Vista)
* Added new launch parameters
* Fixed a Windows key decoding bug
* Fixed the "Licensed" text color for BIOS activated systems
Version 2.1.7
* Fixed a bug that was causing the RSDT to get trashed
Version 2.1.6
* Added a new GRLDR version
* Fixed a Hyper-V installation issue
* Added Tangent Professional serial

* Added Dealin Starter serial
Version 2.1.5
* Added Jetway Home Premium, Home Basic and Starter serials
* Added Jetway SLIC and certificate
* Fixed a bug that caused the unsupported status to be set for every type of iss
ue
* Highlighted the status line so that people understand that Windows 7 Enterpris
e is an unsupported operating system
Version 2.1.4
* Fixed a bug that would cause some systems to fail to boot
* Fixed a bug where an unsupported OS would fail to have it's status set to unsu
pported
* Added Qbex SLIC and certificate
Version 2.1.3
* Added support for Windows Home Server 2011
* Added support for Windows Server 2008 R2 Datacenter
* Added a few new serials
* Improved handling for systems with missing ACPI tables
Version 2.1.2
* Added a new GRLDR version that fixes 2 bugs
* Added support for Windows Small Business Server 2011 Essentials
* Added lots of missing Vista serials (Thanks to Tito)
Version 2.1.1
* Fixed a bug that prevented existing SLIC's from being ignored
* Fixed a bug that caused Windows 8 serials to be decoded incorrectly
* Added Equus, Impression Computers and Xplore SLIC's and certificates
* Added Toshiba Windows 7 Ultimate serial
* Added Xplore Windows 7 Professional serial
* Added Impression Computers Windows 7 Home Premium serial
* Added LaCie Windows Server 2008 R2 Standard serial
* Added Western Digital Windows Storage Server 2008 R2 Essentials serial
Version 2.1
* Added CRC32 checksums to SLIC and certificate dumps
* Enhanced serial decoding so that it supports Windows 8
* Added EXO, ONKYO and Quanmax Home Premium serials
* Added EXO and ONKYO SLIC's and certificates
* Removed NEC Ultimate serial as it's not NEC
Version 2.0.9
* Added NTFS checks for the active system partition
* Added Paradigit SLIC and certificate
* Added Paradigit Home Premium serial
* Added ZT Systems Home Premium serial
* Added NEC Ultimate serial
Version 2.0.8
* Fixed a bug that prevented external SLIC's and certificates from loading
* Fixed a bug that prevented the AT Computers profile from working
* Added BGH e-Nova SLIC and certificate
* Added BGH e-Nova Professional serial
Version 2.0.7
* Added Hyper-V support
* Added Quanmax Professional serial
* Added Stone Ultimate, Professional, Home Basic and Starter serials
* Further enhanced partition identification
* Fixed a bug in the uninstall function
* Fixed access to the recovery menu (Hold 'R' during boot)

Version 2.0.6
* Fixed the ignore existing SLIC option
* Added Stone Home Premium serial
* Added Itautec Home Basic serial
* Added Stone and Itautec SLIC's and certificates
* Cleaned up serials for all Windows Server editions
Version 2.0.5
* Added a new option to patch all OEM table ID's
* Added CCE, Chuangzhicheng and Crea SLIC's and certificates
* Added CCE Windows 7 Professional serial
* Added KSystems and Crea Windows 7 Starter serials
* Changed the way partitions are identified which should fix boot issues for sys
tems with hidden OS partitions
Version 2.0.4
* Recoded around 30% of the application so that the UI can always remain display
ed
* Added progress indicators
* Added LG Starter serial
* Added HP and IBM Windows Small Business Server 2011 Standard serials
* Added Kraftway and Philco Home Premium serials
* Added Philco profile
Version 2.0.3
* Removed the prompt to ignore invalid SLIC's and have made the setting apply fo
r Samsung systems only
Version 2.0.2
* Added TAROX Ultimate, Professional, Home Premium and Starter serials
* Fixed a bug that caused the wrong certificate to be dumped on some machines
* Added a prompt to ignore the existing SLIC on a system if the SLIC is invalid
Version 2.0.1
* Added TAROX and Vestel SLIC's
* Added Positivo and Kraftway Home Basic serials
* Enhanced the installation of GRLDR
* Enhanced the dump option so that it will now dump the certificate and serial a
s well as the SLIC
Version 2.0.0
* Fixed a bug that could cause the application to crash
* Fixed unicode character input for OEM information editing
Version 1.9.9
* Fixed sandbox bug
Version 1.9.8
* Added OEM branding options
* Added AT Computers, Genuine & Zoostorm SLIC's
* Added Genuine Home Premium serial & Zoostorm Starter serial
* Enhanced error handling
* Enhanced environment detection
Version 1.9.7
* Added a new GRLDR version (This should fix many problems)
* Added Viewsonic Starter serial
Version 1.9.6

* Added Aquarius, Hannspree, Hyrican, Lanix, Semp Toshiba, Twinhead & Synnex SLI
C's
* Added Exper, Fujitsu and Hannspree Starter serials
* Added Dealin, Founder and Fujitsu Home Basic serials
* Added Gigabyte and Shuttle Home Premium serials
* Added Dealin and Mercer Professional serials
* Added Fujitsu Ultimate serial
* Added HP serials for UltimateE, ProfessionalE, HomePremiumE & StarterE
Version 1.9.5
* Added a new GRLDR version which fixes a bug that prevented activation on syste
ms with an XSDT
Version 1.9.4
* Added a new GRLDR version (Improves the ignore existing SLIC function)
* Disabled table sorting by default for compatibility reasons
* Added an option to disable type 3 memory as well as an option to reverse the S
LIC search direction
* Displays motherboard version to help with debugging
* Added ECS, Dealin, Higrade and KSystems SLIC's
* Added HCL, Ksystems and MSI Home Basic serials
* Added MSI Professional serial
* Added Dealin Home Premium serial
Version 1.9.3
* You can now install the loader from safe mode
* Added Panasonic, Viewsonic and Kraftway SLIC's
* Added Viewsonic and Kraftway serials
* Fixed a status refresh bug that caused the OS information to be displayed twic
e
Version 1.9.2
* Added an option to disable ACPI table sort (Use this if your system hangs unde
r the default settings)
* Added an option to disable the usage of type 4 memory (Try this if you lose ge
nuine status after hibernation or sleep)
* Tweaked the UI which now also displays the systems current serial
* Fixed a bug which prevented the application from installing the loader over re
ally old GRLDR versions
Version 1.9.1
* Improved corrupt SLIC detection
* Added Medion Starter serial & STEG Professional serial
Version 1.9
* Fixed a bug that caused a few systems to hang
* Added an option to ignore a systems existing SLIC
Version 1.8.9
* The default boot menu display time is now set to 30 seconds
* Custom usermenu.lst file scanning is now an option (disabled by default)
Version 1.8.8
* Added 8-bit SLIC checksum verification
* Added a new custom application icon (Thanks to Logie)
* Added a new GRLDR version (Fixes custom menu loading, just be sure to call you
r menu usermenu.lst)
* Improved ASUS system profiling
* Fixed a bug that prevented people upgrading from version 1.7.x to 1.8.4 or new
er
Version 1.8.7
* Loads your last used settings (Should work with all 1.8.x builds)

Version 1.8.6
* Added SLIC detection with a dumping feature (Used to check if a SLIC is valid)
Version 1.8.5
* Fixed a bug that caused upgrading to fail when "preserve current boot code" wa
s selected
* Added Alienware serial (Professional)
Version 1.8.4
* Added a new GRLDR version (Calculates the EBDA end 256 bytes lower)
* Added the ability to give the SLIC a custom position (Useful if SLIC emulation
fails under the default options)
* Added Olidata SLIC, certificate and serial
Version 1.8.3
* Added a new GRLDR version (Fixes EBDA length calculation)
Version 1.8.2
* Reverted the loaders memory scanning back to low memory first and then EBDA
* Fixed x64 partition checks
Version 1.8.1
* Added a legacy mode which should activate some systems that don't comply with
the normal ACPI specifications
* Improved support for compressed partitions
* Added Toshiba, Exper, Wortmann and Casper SLIC's
* Added a new HCL Windows 7 Professional serial
Version 1.8
* Cleaned up and improved a lot of code
* Added a new GRLDR version (Thanks to lash78 for spending a few hours helping t
o debug)
* Made the UI even more user friendly
* Added some new serials
* Improved certificate OEMID to system OEMID installation
* Made OEM recovery partition ignoring optional
Version 1.7.9
* Fixed a bug that caused an error on non-english systems
* Added an option to disable the loaders random file padding (Use this if you ge
t stuck in a reboot loop and can't access GRUB)
Version 1.7.8
* Fixed loader file padding issue that caused some systems to fail to boot into
Windows
* Fixed Windows Server 2008 R2 support
* Fixed loader pointer issues (For when each OS needs it's own active partition
exclusive while other primaries are set to hidden)
* Added an option to set the boot menu timeout
* Added an option to install the loader without changing your systems MBR (Good
for Linux users & FirstDefense-ISR)
* Added support for Haier, Hasee, HCL, Jooyon, NEC, Tongfang and Viliv
* Added various new OEM SLP serials
* Blocked title version modifications
* Cleaned up some code for better performance (May help fix the rare partition f
inder error)
Version 1.7.7
* Fixed loader modes to stop system hangs
* Changed the way the loader is wrote to the partition (no more mounting)
Version 1.7.6
* Improved the encryption support
* Added support for Gigabyte
* Added Toshiba Professional serial
Version 1.7.5
* Removed the beta SLIC detection (caused crashes on 1.7.4)
* Added support for LG

Version 1.7.4
* Improved SLIC detection (still not tied to anything, it's simply a BETA featur
e until I get more feedback)
* Fixed file write errors caused by version 1.7.3
* Added support for Server Standard R2
* Added support for FSC, Quanmax and Trigem
Version 1.7.3
* Improved free drive letter assignment
* Corrected some grammar
* Added random SLIC encryption support, this means everyones SLIC will have a un
ique encryption
* Added GRLDR file size randomization
* Added GRLDR v0.97-DAZ+SEC-R2. This is just a minor version to support the rand
om encryption
* Added SLIC table detection (BIOS mod and software, it can tell the difference)
* Added support for Advent, Medion and Nokia
Version 1.7.2
* Added encrypted SLIC support
* Added random loader names
* Added byte differences (everyones GRLDR loader won't be byte for byte the same
)
* Added a new GRLDR version (0.97) from zsmin (custom edition for my program)
* Added /norestart argument
* Added support for Windows 7 Home Basic (4 new keys)
Version 1.7.1
* Removed window transparency to fix a Windows 7 artifacts bug and improve respo
nsiveness on older systems using onboard graphics
* Improved the "Custom menu.lst" loader option. It will now show all people usin
g this setting the GRUB menu at system startup
* Upgraded some certificates to version 2.1
* Added a new GRLDR version (0.96) from zsmin (custom edition for my program)
* Added external SLIC support (read "How to add support.txt" for more info)
* Added support for BenQ and Sony machines
* Added support for Windows 7 Starter Edition
Version 1.7
* Removed the older loader
* Added loader mode options
* Changed the UI so that it's now slightly transparent as well as resized to sui
t the new options
* Added Samsung support for Windows 7 Ultimate, Professional & Home Premium edit
ions
* Improved internal resources security
Version 1.6.9
* Added amber as a color to the application integrity checking as well as a few
tweaks to the existing code (you should still always check the displayed applica
tion path even when green)
* Cleaned up some code for better performance
* Added new GRLDR 0.94 from zsmin
Version 1.6.8
* Added application integrity checking. This is a new feature which will display
you with information about how the application was launched when the mouse is h
overed over the green or red icon. It's goal is to inform you if you are running
an untouched version of the application or one that could have been modified in
some way by a script kiddie. Of course green is the best result, if it's red th
en be cautious as someone's likely binded a trojan!
Version 1.6.7
* Fixed Windows Vista activation status
* Added Windows 7 Enterprise editions as a supported OS, although you will need
to wait for OEM SLP keys to leak
Version 1.6.6
* Fixed activation checking for non-english systems (This release is just to add

ress confusion as to if a system is activated or not)
Version 1.6.5
* Improved profile matchups (for matching a SLIC, certificate and serial)
* Added activation checking for Windows 7, Vista and Server 2008
* Added tokens checking for Windows 7 (alerts the user, repair is manual so that
later on down the line this loader will never frankenbuild your system itself!)
* Added error handling should UAC fail to elevate the application
* Added Asus SLIC, certificate and Home Premium serial
* Added new GRLDR beta 0.93 from zsmin
Version 1.6.4
* Fixed a missing serial issue when run as a standalone
* Added checking to elevate to an administrator only when run on Vista or Window
s 7
* Corrected a typo found during an uninstall
Version 1.6.3
* Fixed a missing serial issue caused by the new bios type detection feature
* Fixed an issue which would cause the application to start hidden behind other
windows
Version 1.6.2
* UAC control reworked
* Changed the default loader to zsmin's
* Bios type detection now assigns a SLIC, certificate and if possible a serial t
o match
* Added leaked Dell Home Premium key
Version 1.6.1
* Fixed Windows Vista version detection
* Added new Dell Windows 7 Professional key
Version 1.6
* Fixed Windows version detection (name spaces were off)
* Added support for Windows 7 Home Premium
* Compressed the internals a litte so the executable size has been shaved just a
little
Version 1.5.9
* Fixed missing OS information on unsupported OS's
Version 1.5.8
* Keys and certificates now use internals when external files cannot be found (t
his means you can run just the executable as a standalone application)
* Added future OS key support (via Keys.ini)
* Changed how an unsupported OS is displayed
* Added new GRLDR beta 8c from zsmin
Version 1.5.7
* Fixed unicode text string issue which caused activation to fail
* Fixed title assignment for unsupported operating systems
* Added new GRLDR beta 8b from zsmin
Version 1.5.6
* Full recode so that debugging is easier for me and performance and reliability
is better for you
* User interface redesigned for simplicity
* Added new GRLDR beta 8 from zsmin (Thanks go to him)
* Added external certificate support for bios modders
* Added external key input support
* Added argument support
Version 1.5.5
* Improved error handling even more
* Rewrote drive mounting code (should fix the x64 mounting issue and letter assi
gnment)
* Mac users should now automatically have the experimental loader option selecte
d for them
* Tweaked UI layout just a little (width was off)
* Fixed other minor issues
Version 1.5.4
* Tweaked free drive letter handling just a little

* Corrected a typo on the experimental loader option
* Corrected Windows Vista version ID
Version 1.5.3
* Fixed a rare issue that would select a network drive as a free drive letter
* Performing an uninstall now restores to the default Windows 7/Vista bootsect (
wasn't required, but some machines need this!)
* Performing an uninstall now inserts trial keys so you will have x amount of da
ys remaining (On Windows 7)
* Upgraded support for error handling (errors get logged to the system event vie
wer)
* The loader window will now start centered when launched
* Added a custom file icon (Thanks to my friend Logie)
* Added support for Starter, HomeBasicN and BusinessN versions of Windows Vista
* Upgraded experimental GRLDR to beta 6 (Thanks to zsmin)
* Added another GRLDR for older Dell and HP machines to try (the older loader op
tion)
* Cleaned up code in general
Version 1.5.2
* Fixed a rare issue which could cause a nil object exception
* The window title will now change to a more suiting "Windows Vista Loader v1.5.
2 - By Daz" when run on Windows Vista
Version 1.5.1
* Updated GRLDR v0.4.4 to beta version 4 (Thanks to zsmin)
Version 1.5
* Fix to prevent hangs at boot when each OS needs it's own active partition excl
usive while other primaries are set to hidden. Every other loader has this bug!
(Thanks to endeavor for working with me to fix this issue)
* Can now activate both Windows 7 and Windows Vista, just run the loader on eith
er OS
* Optional new beta GRLDR v0.4.4 can be used on Mac or Windows (New GRLDR create
d by zsmin, boots Windows 7 on a Mac much faster)
* Updates to GRLDR v0.4.4 to become dynamic and allow slic change
* Fixed UI font sizes for users who have changed their system font
Version 1.4
* Added x64 support
* Drive letter assignment is now automatic
* Changed how the key input is handled
* Made UI a little more user friendly
Version 1.3
* Added brand support to the loader creator
* Added certificate and serial install only for bios modded users
* Added new Ultimate and Professional keys
* The loader now automatically displays keys only for your installed version of
Windows 7
Version 1.2
* UAC settings modified in manifest
* Added future support for Windows 7 Professional
Version 1.1
* Silent certificate and key installs
* Fixed file overwriting issue
* Lists some BIOS information
##########################################################################
# 8 - Arguments
##########################################################################
/silent
Turns on silent mode
/restart
Restart the OS after install (used with /silent)
/norestart
Prevents system restart after successful installation
/preactivate
This just helps the loader decide on it's environment
/bios
Force the application to install just the certificate and serial

/loader
Force the application to install the loader
/relocate
This tries to prevent the loader from relocating the RSDP to EBDA
/disable4
This will prevent the loader from using type 4 memory
/disable3
This will prevent the loader from using type 3 memory
/legacy
This will install the loader using the legacy mode
/ignore
The loader will ignore the systems existing SLIC
/swap
Install the loader without changing your systems boot code
/k=XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
Set the Windows 7/2008/Vista key
/c=
Set the certificate (use the name of a certificate from the certificates folder
or from the SLIC list)
/s=
Set the SLIC (Acer, Advent, Alienware, AOC, Aquarius, Asus, AT Computers, BEKO,
BenQ, BGH e-Nova, ByteSpeed, Casper, CCE, Chuangzhicheng, Crea, Dealin, Dell (v
2.2), Dell, Digimer, Equus, Excimer, EXO, Exper, EXTRA Computer GmbH, Founder, F
SC, Fujitsu, Genuine, Gigabyte, Haier, Hannspree, Hasee, HCL, Higrade, HP, Hyric
an, Impression Computers, INSYS, Itautec, Jetway, Jooyon, Kraftway, KSystems, La
nix, Lenovo, LG, MA Technology, Medion, MiTAC, MSI, Mustek, NEC, Nokia, Olidata,
ONKYO, Panasonic, Paradigit, Philco, Positivo, PowerSpec, Qbex, Quanmax, RM Edu
cation, Samsung, Seneca, Sony, Stone, Synnex, Systemax, Tarox, Tongfang, Toshiba
, Trigem, Twinhead, Velocity, Vestel, Viewsonic, Viliv, Western Digital, Wortman
n, Xplore, ZoostormAcer, Advent, Alienware, AOC, Aquarius, Asus, AT Computers, B
EKO, BenQ, BGH e-Nova, ByteSpeed, Casper, CCE, Chuangzhicheng, Crea, Dealin, Del
l (v2.2), Dell, Digimer, Equus, Excimer, EXO, Exper, EXTRA Computer GmbH, Founde
r, FSC, Fujitsu, Genuine, Gigabyte, Haier, Hannspree, Hasee, HCL, Higrade, HP, H
yrican, Impression Computers, INSYS, Itautec, Jetway, Jooyon, Kraftway, KSystems
, Lanix, Lenovo, LG, MA Technology, Medion, MiTAC, MSI, Mustek, NEC, Nokia, Olid
ata, ONKYO, Panasonic, Paradigit, Philco, Positivo, PowerSpec, Qbex, Quanmax, RM
Education, Samsung, Seneca, Sony, Stone, Synnex, Systemax, Tarox, Tongfang, Tos
hiba, Trigem, Twinhead, Velocity, Vestel, Viewsonic, Viliv, Western Digital, Wor
tmann, Xplore, Zoostorm)
======
* If you don't set the certificate it will default to your BIOS's model
* If you don't set the SLIC it will default to your BIOS's model
* If you don't set the key it will default to your BIOS's model and the correct
one for the OS (Ultimate, Professional, Starter or Home Premium)
* You can use these arguments via SetupComplete.cmd to pre-activate Windows 7/Vi
sta/Server 2008
======
Example:
"D:Windows Loader.exe" /silent /restart /k=342DG-6YJR8-X92GV-V7DCV-P4K27 /c=Ace
r /s=Acer
SetupComplete.cmd Example:
@ECHO OFF
%~dp0"Windows Loader.exe" /silent /preactivate
cd %~dp0
attrib -R -A -S -H *.*
SHUTDOWN /R /T 5
RMDIR /S /Q "%WINDIR%SetupScripts"
exit
##########################################################################
# 9 - Extra
##########################################################################
If a certificate or SLIC is released and I have not put out a new version of my
application simply create two folders, one called "Certificates" and another cal
led "SLICs".

In each folder put the files you want to add support for, just be sure you label
the files like this:
*Certificates folder*
Acer.XRM-MS
Advent.XRM-MS
Alienware.XRM-MS
Asus.XRM-MS
*SLICs folder*
Acer.BIN
Advent.BIN
Alienware.BIN
Asus.BIN
When using external files all preset internals will be ignored. This is a cleane
r approach for users who want to build their own list without my presets getting
in the way.
Special thanks:
BobSheep, zsmin & Woota!?
Thanks:
Everyone who supports this project, you're all the reason I'm still working on i
t.

fixed loader

More Related Content

What's hot

Similar to fixed loader

Recently uploaded

fixed loader