The document provides 7 step-by-step instructions for installing a fire hose rack. The instructions explain how to layout the uprights and place cradles in keyholes on the uprights to support shelves. Cradles are placed in keyholes 3-4, 19-20, and 35-36 to securely hold three shelves. A regular shelf support without a cradle is placed at the top and a canopy shelf is added to complete the installation.

1. Fire Hose Rack -- Installation Instructions
www.firehosestorage.com
1-800-803-1083
Instructions:
Step 1: Layout rack uprights with the key
holes facing in the correct direction (small
notch facing down).
Step 2: Starting from the bottom, place a
cradle in the front and back (2 per shelf
needed) in keyholes 3 & 4 (counting up from
the bottom).
Upright (outlined in black)
Cradle (outlined in red)
Step 3: Tap down cradles with a rubber
mallet to set the support securely in place.
Step 4: The second set of cradles will
occupy keyholes 19 & 20 (counting up from
the bottom). Repeat ‘Step 3’ to secure
cradle.
Step 6: The third set of cradles will occupy
keyholes 35 & 36 (counting up from the
bottom). Repeat ‘Step 3’ to secure cradle.
Step 7: Place regular shelf support (no
cradle) in the top 2 keyholes of the upright.
Secure supports and then place canopy
shelf in place on top (dust cover).
Notes:
A minimum of 25 inches is needed for to
maintain correct spacing between hose
rests.
The supports (two: one front and one back)
are manufactured to cradle the coiled fire
hoses.
www.southwestsolutions.com