Final pdf
•
0 likes•273 views
The document contains technical drawings and parts lists for an assembly created by student lee2075 using Autodesk software. It includes 5 separate drawings titled Part 1 through Part 5 created on October 8, 2010 at a scale of 1 inch = 1 inch. It also includes an assembly drawing titled Assembly created on October 14, 2010 with varying scales bringing all 5 parts together. The final page lists the parts with their quantities as Part 1 (1), Part 2 (2), Part 3 (3), Part 4 (4), and Part 5 (5).
Report
Share
Report
Share
Download to read offline
Recommended
Cube Inventor Drawings
The document contains technical drawings and parts lists for an assembly project created by student mellado2642 using an Autodesk educational product. It includes 5 technical drawings for parts numbered c1p1 through c1p5 created on October 7, 2010 at a scale of 1 inch = 1 inch. It also includes an assembly drawing named Assemblyc1 created on October 14, 2010 at the same scale along with a parts list describing 5 parts for the assembly numbered 1 through 5 in different colors.
The ied title_block
The document contains 11 sections describing drawings produced by the student jestice7882 using an Autodesk educational product. Each section lists the drawing name, scale, and date and includes numerical coordinates. The drawings were created between October 21-29, 2010 and depict pieces or parts at a 1:1 scale.
Multiviews
The document contains technical drawings produced by an Autodesk educational product. Each page contains information about the student name, drawing name, scale, and date. Dimensions ranging from 0.25 to 2.75 are listed on each page. There are multiple pages showing different drawings by the same student on various dates.
CE50006 Life cycle assessment (1)
This 3 sentence summary provides the high level information from the document:
This certificate recognizes that Nwaka Ogaga successfully completed the CE50006 Life cycle assessment continuing professional development course in June 2011, as certified by the Head of Department of the Department of Chemical Engineering at www.bath.ac.uk/iem in January 2013.
Cookies by Juston
The document discusses cookies, browser storage of cookies, and tools for managing cookies and cleaning browsers. It provides recommendations for TuneUp Utilities, CCleaner, and ASC Ultimate and includes references and links for further information about cookies, how browsers store them, and how to enable cookies. The document encourages the reader not to worry about difficult situations and ends with an expression of gratitude.
Budget 2020 Highlights in hindi - Arthgyani
हर साल बजट आता है, हर साल के बजट के साथ हर वर्ग उम्मीदें लगाता है| कुछ को बजट से खुशियां मिलती हैं, कुछ को निराशा होती है| मगर बजट क्या है? यह कैसे कार्य करता है? यह जानने के लिए हम लेकर आए हैं, बजट से संबंधित पूरी जानकारी |
Link : http://bit.ly/बजट-२०२०-हिंदी
Recommended
Cube Inventor Drawings
The document contains technical drawings and parts lists for an assembly project created by student mellado2642 using an Autodesk educational product. It includes 5 technical drawings for parts numbered c1p1 through c1p5 created on October 7, 2010 at a scale of 1 inch = 1 inch. It also includes an assembly drawing named Assemblyc1 created on October 14, 2010 at the same scale along with a parts list describing 5 parts for the assembly numbered 1 through 5 in different colors.
The ied title_block
The document contains 11 sections describing drawings produced by the student jestice7882 using an Autodesk educational product. Each section lists the drawing name, scale, and date and includes numerical coordinates. The drawings were created between October 21-29, 2010 and depict pieces or parts at a 1:1 scale.
Multiviews
The document contains technical drawings produced by an Autodesk educational product. Each page contains information about the student name, drawing name, scale, and date. Dimensions ranging from 0.25 to 2.75 are listed on each page. There are multiple pages showing different drawings by the same student on various dates.
CE50006 Life cycle assessment (1)
This 3 sentence summary provides the high level information from the document:
This certificate recognizes that Nwaka Ogaga successfully completed the CE50006 Life cycle assessment continuing professional development course in June 2011, as certified by the Head of Department of the Department of Chemical Engineering at www.bath.ac.uk/iem in January 2013.
Cookies by Juston
The document discusses cookies, browser storage of cookies, and tools for managing cookies and cleaning browsers. It provides recommendations for TuneUp Utilities, CCleaner, and ASC Ultimate and includes references and links for further information about cookies, how browsers store them, and how to enable cookies. The document encourages the reader not to worry about difficult situations and ends with an expression of gratitude.
Budget 2020 Highlights in hindi - Arthgyani
हर साल बजट आता है, हर साल के बजट के साथ हर वर्ग उम्मीदें लगाता है| कुछ को बजट से खुशियां मिलती हैं, कुछ को निराशा होती है| मगर बजट क्या है? यह कैसे कार्य करता है? यह जानने के लिए हम लेकर आए हैं, बजट से संबंधित पूरी जानकारी |
Link : http://bit.ly/बजट-२०२०-हिंदी
Train car drawings
The document contains 7 technical drawings produced by an Autodesk educational product. Each drawing is labeled with the student name "lee2075", the drawing name (Part 1 through Part 7), scale of the drawing, and date. The drawings contain technical drawings of mechanical objects and parts with labeled dimensions.
Internet
Este documento lista sitios web populares utilizados para investigar, trabajar y aprender como www.aulaclic.es, www.colombiaaprende.edu.co, www.wikipedia.org, www.monografias.com y motores de búsqueda como www.google.com.co y plataformas de correo electrónico como www.hotmail.com y www.gmail.com.
RESISTENCIA DOS MATERIAIS PARA ENTENDER E GOSTAR (COMPLETO)
RESISTENCIA DOS MATERIAIS PARA ENTENDER E GOSTAR (COMPLETO)
Finite_element_method_in_machining_processes
This document provides an overview of a book on finite element modeling of machining processes. It includes 5 chapters that discuss machining processes and chip formation, analytical modeling techniques, finite element modeling considerations and methodology, applications of finite element modeling to specific machining processes like high speed and micro machining, and other modeling techniques such as modeling of grinding and use of soft computing and molecular dynamics. It aims to introduce readers to modeling of machining using finite element analysis and provide examples of its applications.
Careercounselors
Human resources, training, and labor relations managers and specialists play an important role in organizations by connecting qualified employees to suitable jobs, managing administrative tasks, consulting on strategic planning, enhancing morale and productivity, providing training opportunities, and helping companies effectively utilize employee skills. There are many types of these professionals, from generalists in small organizations handling all human resources work to specialized managers heading departments like employment and placement, compensation and benefits, training and development, or labor relations in large corporations. They work to recruit, hire, and support employees at all levels from elementary school through post-secondary education and career transitions.
Jack d. jake k. hae wook
The document summarizes research about Haiti, including its location, terrain, climate, population, and the devastating 2010 earthquake. It discusses Haiti's urgent need for shelters, as 30% of the capital was destroyed and 1.5 million people were left homeless. Current shelter solutions are described as expensive or unable to meet demand. The problem of providing affordable temporary shelters at scale is selected for further exploration, with the goal of using recycled materials for a foldable, portable design that protects against weather.
Brian jestice inventor drawings
The document contains 11 sections describing drawings produced by the student jestice7882 using an Autodesk educational product. Each section lists the drawing name, scale, and date and includes numerical coordinates. The drawings were created between October 21-29, 2010 and depict pieces or parts at a 1:1 scale.
Puzzle Cube Presentation
The document contains technical drawings for 5 individual pieces and an assembly drawing combining the pieces. Each piece drawing is labeled with the student's name, drawing name, scale, and date. The assembly drawing brings together the 5 pieces, similarly labeled at the bottom. A parts list at the end identifies each piece and its quantity in the assembly.
Cubeprojectfinal2[1]
The document contains technical drawings and part lists produced by an Autodesk educational product. It includes 5 drawings with different colors created by student Brianne Frys between October 7-18, 2010 at a scale of 1 inch = 1 inch. A final assembly drawing brings together the individual parts in a schematic dated October 14, 2010.
Cubeprojectfinal2[1]
The document contains technical drawings and part lists produced by an Autodesk educational product. It includes 5 drawings with different colors created by student Brianne Frys between October 7-18, 2010 at a scale of 1 inch = 1 inch. A final assembly drawing brings together the individual parts in a schematic dated October 14, 2010.
Inventor Drawing Assignment
The document contains technical drawings produced by an Autodesk educational product. Each page contains information about the student name, drawing name, scale, and date. Dimensions ranging from 0.25 to 2.75 are listed on each page. There are multiple pages showing different drawings by the same student on various dates.
Multiviews
The document contains technical drawings from an Autodesk educational product. It lists dimensions for parts 3, 4, 7, 8, 10, and 11 created by student witt2634 between October 21-22, 2010. Each drawing is scaled 1 inch to 1 inch.
Inventor Drawings
The document contains technical drawings from a student named depau9827 created using an Autodesk educational product. There are drawings titled "Sketching problem-3" through "Sketching problem-11" dated from October 21-25, 2010 with various scales listed. The drawings appear to be practice sketches done by the student to learn technical drawing skills.
Cube project
The document contains technical drawings and part lists for an assembly created by a student named swenson1906 using Autodesk educational software. It includes individual drawings scaled at 1"=1" for parts in blue, light green, pink, yellow, and purple created between October 6-7, 2010. These parts are then assembled together in a final drawing labeled 1-Assembly.iam with varying scales and dated October 14, 2010 along with a parts list detailing the parts and their quantities.
Cube Project Final
The document contains a parts list for an assembly project. It lists 5 parts with the following part numbers and quantities: Part1 (1), Part2 (4), Part3 (2), Part4 (3), Part5 (5). The parts list is preceded by documentation showing the drawings were created by a student named Tobias using Autodesk software between October 7-14, 2010.
Bran jestice cube
The document is a parts list for an assembly project. It lists 5 parts with their corresponding part numbers and quantities. The parts list is preceded by multiple pages showing the technical drawings for the individual parts, including dimensions. The drawings were created by a student named jestice7882 using Autodesk software between October 6-14, 2010.
Brian Jestice cross section drawings
The document contains 4 sections (A-A, B-B, C-C, D-D) of technical drawings at a scale of 1.5 inches to 1 inch. Each section depicts a cross section view and includes dimensions. Section information like scales, fillets, and rounds are provided for each view. The drawings were created using Autodesk software and include the student name, drawing name, scale, and date.
TrainCarMultiviews
The document contains technical drawings for parts of a model car created by a student named witt2634 using Autodesk software. The drawings include dimensions and notes for a base, two sides, two side connectors, and four wheels. A final assembly drawing shows how to assemble the seven listed parts into a complete model car.
Brian jestice train car parts
The document contains technical drawings for parts of a train car assembly project produced by an Autodesk educational product. The drawings include individual parts like a train car base, oil tank, wheel, and ladder, as well as an assembly drawing bringing all the parts together. A parts list accompanies the assembly drawing, identifying 5 total parts along with their quantities.
All train drawings
The document contains technical drawings for an axle assembly created by a student using Autodesk software. The drawings depict individual parts like the base, walls, housing and wheels at varying scales. An assembly drawing brings the parts together and lists them with quantities. The student's name, drawing name, scale and date are provided for each part and assembly print.
cross-section
This document contains 4 technical drawings labeled Section B-B through Section E-E. Each drawing shows the dimensions and features of a different part, including through holes, rounds, fillets, and other geometric features. The drawings are at a scale of 1/2 inch to 1 inch and were created by an Autodesk educational product. They include the student name, drawing name, scale, and date.
More Related Content
Viewers also liked
Train car drawings
The document contains 7 technical drawings produced by an Autodesk educational product. Each drawing is labeled with the student name "lee2075", the drawing name (Part 1 through Part 7), scale of the drawing, and date. The drawings contain technical drawings of mechanical objects and parts with labeled dimensions.
Internet
Este documento lista sitios web populares utilizados para investigar, trabajar y aprender como www.aulaclic.es, www.colombiaaprende.edu.co, www.wikipedia.org, www.monografias.com y motores de búsqueda como www.google.com.co y plataformas de correo electrónico como www.hotmail.com y www.gmail.com.
RESISTENCIA DOS MATERIAIS PARA ENTENDER E GOSTAR (COMPLETO)
RESISTENCIA DOS MATERIAIS PARA ENTENDER E GOSTAR (COMPLETO)
Finite_element_method_in_machining_processes
This document provides an overview of a book on finite element modeling of machining processes. It includes 5 chapters that discuss machining processes and chip formation, analytical modeling techniques, finite element modeling considerations and methodology, applications of finite element modeling to specific machining processes like high speed and micro machining, and other modeling techniques such as modeling of grinding and use of soft computing and molecular dynamics. It aims to introduce readers to modeling of machining using finite element analysis and provide examples of its applications.
Careercounselors
Human resources, training, and labor relations managers and specialists play an important role in organizations by connecting qualified employees to suitable jobs, managing administrative tasks, consulting on strategic planning, enhancing morale and productivity, providing training opportunities, and helping companies effectively utilize employee skills. There are many types of these professionals, from generalists in small organizations handling all human resources work to specialized managers heading departments like employment and placement, compensation and benefits, training and development, or labor relations in large corporations. They work to recruit, hire, and support employees at all levels from elementary school through post-secondary education and career transitions.
Jack d. jake k. hae wook
The document summarizes research about Haiti, including its location, terrain, climate, population, and the devastating 2010 earthquake. It discusses Haiti's urgent need for shelters, as 30% of the capital was destroyed and 1.5 million people were left homeless. Current shelter solutions are described as expensive or unable to meet demand. The problem of providing affordable temporary shelters at scale is selected for further exploration, with the goal of using recycled materials for a foldable, portable design that protects against weather.
Viewers also liked (7)
RESISTENCIA DOS MATERIAIS PARA ENTENDER E GOSTAR (COMPLETO)
RESISTENCIA DOS MATERIAIS PARA ENTENDER E GOSTAR (COMPLETO)
Similar to Final pdf
Brian jestice inventor drawings
The document contains 11 sections describing drawings produced by the student jestice7882 using an Autodesk educational product. Each section lists the drawing name, scale, and date and includes numerical coordinates. The drawings were created between October 21-29, 2010 and depict pieces or parts at a 1:1 scale.
Puzzle Cube Presentation
The document contains technical drawings for 5 individual pieces and an assembly drawing combining the pieces. Each piece drawing is labeled with the student's name, drawing name, scale, and date. The assembly drawing brings together the 5 pieces, similarly labeled at the bottom. A parts list at the end identifies each piece and its quantity in the assembly.
Cubeprojectfinal2[1]
The document contains technical drawings and part lists produced by an Autodesk educational product. It includes 5 drawings with different colors created by student Brianne Frys between October 7-18, 2010 at a scale of 1 inch = 1 inch. A final assembly drawing brings together the individual parts in a schematic dated October 14, 2010.
Cubeprojectfinal2[1]
The document contains technical drawings and part lists produced by an Autodesk educational product. It includes 5 drawings with different colors created by student Brianne Frys between October 7-18, 2010 at a scale of 1 inch = 1 inch. A final assembly drawing brings together the individual parts in a schematic dated October 14, 2010.
Inventor Drawing Assignment
The document contains technical drawings produced by an Autodesk educational product. Each page contains information about the student name, drawing name, scale, and date. Dimensions ranging from 0.25 to 2.75 are listed on each page. There are multiple pages showing different drawings by the same student on various dates.
Multiviews
The document contains technical drawings from an Autodesk educational product. It lists dimensions for parts 3, 4, 7, 8, 10, and 11 created by student witt2634 between October 21-22, 2010. Each drawing is scaled 1 inch to 1 inch.
Inventor Drawings
The document contains technical drawings from a student named depau9827 created using an Autodesk educational product. There are drawings titled "Sketching problem-3" through "Sketching problem-11" dated from October 21-25, 2010 with various scales listed. The drawings appear to be practice sketches done by the student to learn technical drawing skills.
Cube project
The document contains technical drawings and part lists for an assembly created by a student named swenson1906 using Autodesk educational software. It includes individual drawings scaled at 1"=1" for parts in blue, light green, pink, yellow, and purple created between October 6-7, 2010. These parts are then assembled together in a final drawing labeled 1-Assembly.iam with varying scales and dated October 14, 2010 along with a parts list detailing the parts and their quantities.
Cube Project Final
The document contains a parts list for an assembly project. It lists 5 parts with the following part numbers and quantities: Part1 (1), Part2 (4), Part3 (2), Part4 (3), Part5 (5). The parts list is preceded by documentation showing the drawings were created by a student named Tobias using Autodesk software between October 7-14, 2010.
Bran jestice cube
The document is a parts list for an assembly project. It lists 5 parts with their corresponding part numbers and quantities. The parts list is preceded by multiple pages showing the technical drawings for the individual parts, including dimensions. The drawings were created by a student named jestice7882 using Autodesk software between October 6-14, 2010.
Brian Jestice cross section drawings
The document contains 4 sections (A-A, B-B, C-C, D-D) of technical drawings at a scale of 1.5 inches to 1 inch. Each section depicts a cross section view and includes dimensions. Section information like scales, fillets, and rounds are provided for each view. The drawings were created using Autodesk software and include the student name, drawing name, scale, and date.
TrainCarMultiviews
The document contains technical drawings for parts of a model car created by a student named witt2634 using Autodesk software. The drawings include dimensions and notes for a base, two sides, two side connectors, and four wheels. A final assembly drawing shows how to assemble the seven listed parts into a complete model car.
Brian jestice train car parts
The document contains technical drawings for parts of a train car assembly project produced by an Autodesk educational product. The drawings include individual parts like a train car base, oil tank, wheel, and ladder, as well as an assembly drawing bringing all the parts together. A parts list accompanies the assembly drawing, identifying 5 total parts along with their quantities.
All train drawings
The document contains technical drawings for an axle assembly created by a student using Autodesk software. The drawings depict individual parts like the base, walls, housing and wheels at varying scales. An assembly drawing brings the parts together and lists them with quantities. The student's name, drawing name, scale and date are provided for each part and assembly print.
cross-section
This document contains 4 technical drawings labeled Section B-B through Section E-E. Each drawing shows the dimensions and features of a different part, including through holes, rounds, fillets, and other geometric features. The drawings are at a scale of 1/2 inch to 1 inch and were created by an Autodesk educational product. They include the student name, drawing name, scale, and date.
Cordflexer drawings sean h r brian j
The document contains several engineering drawings created by students using Autodesk software. The drawings include parts for a cord flexor assembly, such as Cord Flexor Part 1-3, and a wrench. Other drawings show a collar part and section view with dimensions. Each image is labeled with the student name, drawing name, scale, and date.
Haewook lee problem 10.17
This technical drawing depicts various geometric shapes such as rectangles, circles, and arcs with labeled dimensions. Key specifications include a rectangle with dimensions of 4.00 x 2.50 units, a circle with a diameter of 1.25 units, and an arc with a radius of 1.25 units within a larger rectangle. The drawing was produced by Autodesk design software for educational purposes and contains the student's name, drawing name, scale of 1:2, and date.
Haewook lee problem 10.17
This technical drawing shows the dimensions of various geometric shapes including lines, circles, arcs and rectangles. Key dimensions shown are lines and arcs with lengths of 1, 1.25, 2, 2.5 and 4 units as well as a circle with a diameter of 1.25 units and rectangles with sides of 1 by 2.5 and 1.25 by 2 units. The drawing also includes information about the student name, drawing name, scale and date.
CAD drawings
The document repeatedly states that it was produced by an Autodesk educational product. It contains multiple repetitions of the phrase "PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT" and "PRODUCEDBYANAUTODESKEDUCATIONALPRODUCT", indicating that whatever was produced came from an Autodesk software tool intended for educational use.
Oisin O'Dwyer Sample Works
The document contains technical drawings and 3D renderings from a student project for an island cabin designed in Autodesk Revit. The drawings include floor plans, sections, elevations and perspective views showing walls, floors, fixtures and external/internal features of the proposed cabin building. Captions provide information about scales, dates, designers and the purpose of the student project to design a cabin.
Similar to Final pdf (20)
More from hw0830
Haewook lee, michael mc williams drawings
The document contains technical drawings for parts of a test rack, including the base of the test rack, a backplate, and screws. The drawings include dimensions, tolerances, notes and labels to fully specify the geometry and features of each part. Dimensioned orthographic and section views are provided for all parts to completely define their design and facilitate manufacturing.
Haewook lee, anthony langas re drawings
The document contains several technical drawings produced by Autodesk educational software. Each page includes a technical drawing with measurements and dimensions. Below each drawing are the student name who produced it, the drawing name, scale of the drawing, and date. The drawings were created by students lee2075 and langas2053 and include designs labeled as solutions to various assignments.
Research
The document summarizes research about providing shelter for those affected by the 2010 earthquake in Haiti. It provides background on Haiti's geography and climate. It then discusses the urgent need for shelter, as many buildings were destroyed. It reviews various proposed shelter solutions but notes they are often expensive or cannot be produced quickly enough. It proposes designing a temporary shelter that is inexpensive, portable, and made of recycled materials to better meet Haiti's needs.
Jack d. jake k. hae wook
The document summarizes research about shelter needs in Haiti after the 2010 earthquake. It provides background on Haiti's geography and climate. It then discusses how the earthquake destroyed much of the housing stock and left over 1.5 million people homeless. It reviews several existing shelter solutions but notes they are expensive to implement at scale. It proposes designing an inexpensive, portable shelter made of recycled materials that can house many Haitians and protect them from storms.
Haewook lee decision matrix
This document appears to be a student's decision matrix template for a school project. It contains a table with categories like complexity, development time, safety, and size. There are three potential ideas being evaluated, with scores from 1 to 3 in each category and a total score. The categories are ranked from worst to best.
Cnc
This document is a technical drawing created by a student named Haewook Lee using Autodesk educational software. It includes the drawing name, scale, date, and a repeated statement that it was produced using Autodesk educational software. Dimensions and labels are provided for various lines and shapes in the technical drawing.
Tony multiviews
The document contains 3 technical drawings created by students using Autodesk software. The drawings include dimensions and notes for a cow catcher, hitch magazine, and linkage arm. Key details noted are dimensions for various features of the objects ranging from 0.01 to 3.88 inches. Students' names and dates are listed for each drawing.
Activity2 1 5_cad_model_features-- tony sorrentino and hae wook
This document describes an activity to learn common 3D modeling features in CAD software. It includes 19 exercises to utilize features like extrusions, patterns, holes, fillets, and more. Students are instructed to open CAD files for each exercise, use the specified features, and export images of their work. Common features covered include mid-plane extrusions, tapered extrusions, revolves, holes, lofts, patterns, shells, ribs, sweeps, coils, threads, fillets, chamfers, mirrors, embossing, and decals. The goal is to understand how each feature works and gain experience using the modeling tools.
Haewook lee section drawings
The document contains technical drawings of various mechanical parts with labeled dimensions. It includes an orthographic projection of the parts with section views cut through them. The drawings were created with Autodesk software by a student for a class project and include the student name, drawing name, scale, and date.
Practice problems
The document contains several technical drawings produced by an Autodesk educational product. Each page displays geometric shapes with numerical dimensions, and includes a student name, drawing name, scale, and date in the header. The drawings were created by a student named lee2075 between October 21-25, 2010 using Autodesk design software for educational purposes.
Part b
The document shows a technical drawing with labeled dimensions of a mechanical part. Key dimensions include a length of 4.60 units on one side, widths of .84 and 1 units on another side, and various radii and depths labeled in decimal units. The drawing title is listed as "Part Be.ipt" and it is scaled at 1 inch for every 2 drawing units. It was produced by an Autodesk educational product and includes the student and date who created the drawing.
Statistic Chart
This document contains statistics related to the length of blocks in a cube. It provides the mean, median, mode, range, and standard deviation of the block lengths. It also includes a frequency table showing the number of blocks that fall within certain length bins.
Evolution project
Automobiles were invented by Karl Benz in 1885 when he introduced the Motorwagen, the first three-wheeled car powered by a gasoline engine. Since then, cars have been made entirely of steel, added safety features like seatbelts and airbags, and new technologies like hybrid engines. While automobiles have improved mobility, they have also negatively impacted the environment through air pollution and greenhouse gas emissions and require vast amounts of resources.
More from hw0830 (15)
Activity2 1 5_cad_model_features-- tony sorrentino and hae wook
Activity2 1 5_cad_model_features-- tony sorrentino and hae wook
Final pdf
- 1. PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTPRODUCEDBYANAUTODESKEDUCATIONALPRODUCT PRODUCEDBYANAUTODESKEDUCATIONALPRODUCT STUDENT NAME DRAWING NAME SCALE DATE lee2075 Part 1.ipt 1" = 1" 10/8/2010 .75 1.50 .75 1.50 1.50 .75
- 2. PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTPRODUCEDBYANAUTODESKEDUCATIONALPRODUCT PRODUCEDBYANAUTODESKEDUCATIONALPRODUCT STUDENT NAME DRAWING NAME SCALE DATE lee2075 Part 2.ipt 1" = 1" 10/8/2010 2.25 .75 1.50 .75 .75 2.25 .75
- 3. PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTPRODUCEDBYANAUTODESKEDUCATIONALPRODUCT PRODUCEDBYANAUTODESKEDUCATIONALPRODUCT STUDENT NAME DRAWING NAME SCALE DATE lee2075 Part 3.ipt 1" = 1" 10/8/2010 1.50 .75 1.50 .75 1.50
- 4. PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTPRODUCEDBYANAUTODESKEDUCATIONALPRODUCT PRODUCEDBYANAUTODESKEDUCATIONALPRODUCT STUDENT NAME DRAWING NAME SCALE DATE lee2075 Part 4.ipt 1" = 1" 10/8/2010 2.25 1.50 .75 1.50 1.50 .75 .75
- 5. PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTPRODUCEDBYANAUTODESKEDUCATIONALPRODUCT PRODUCEDBYANAUTODESKEDUCATIONALPRODUCT STUDENT NAME DRAWING NAME SCALE DATE lee2075 Part 5.ipt 1" = 1" 10/8/2010 .75 1.50 .75 1.50 2.25
- 6. Parts List PART NUMBERQTYITEM Part 111 Part 212 Part 313 Part 414 Part 515 PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTPRODUCEDBYANAUTODESKEDUCATIONALPRODUCT PRODUCEDBYANAUTODESKEDUCATIONALPRODUCT STUDENT NAME DRAWING NAME SCALE DATE lee2075 Assembly.iam Varies 10/14/2010 1 3 4 2 5