The hydraulic system of the tractor operates under high pressure even when turned off. Special safety measures must be taken before performing any repairs to the hydraulic system, such as relieving pressure from the accumulator and suspension cylinders. Failure to do so could result in personal injury from pressurized oil. Proper training and compliance with safety regulations are required for repair work.
Fendt 711 vario tractor service repair manualjjskefkskemik
The document provides safety instructions for working on and repairing the hydraulic system in Fendt tractors. It warns that the pressure pipes and accumulators connected to the central control block are pressurized up to 200 bar even with the engine off. The pressure must be manually relieved before performing any repairs in this area. Special care is required as the "Lock suspension / lower suspension" command does not relieve the pressure.
Fendt 818 vario tractor service repair manualfjskekxswesemm
The document provides safety instructions for working on and repairing the hydraulic system in Fendt tractors. It warns that the pressure pipes and accumulators connected to the central control block are pressurized up to 200 bar even with the engine off. The pressure must be manually relieved before performing any repairs in this area. Failure to do so could result in personal injury or damage. Proper safety precautions and training are required for working on Fendt hydraulic systems.
Fendt 712 vario tractor service repair manualfjskefkemms
The document provides safety instructions for working on and repairing the hydraulic system in Fendt tractors. It warns that the pressure pipes and accumulators connected to the central control block are pressurized up to 200 bar even with the engine off. The pressure must be manually relieved before performing any repairs in this area. Failure to do so could result in personal injury or damage. Proper safety precautions and training are required for working on Fendt hydraulic systems.
This document is a technical manual for 300D, 310D, and 315D backhoe loaders that provides operation and test information. It contains sections on general information, operational checkout procedures, the engine, electrical system, power train, hydraulics, and heating and air conditioning. The general information section covers safety, specifications, torque values, and fuels and lubricants. It provides details on the machine models, their components and systems, capacities, lift capacities, and specifications. The manual is intended to help technicians identify routine failures and contains information organized by component groups.
This is the Highly Detailed factory service repair manual for theJCB 3.0D 4×4, 3.5D 4×4 TELETRUK, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.JCB 3.0D 4×4, 3.5D 4×4 TELETRUK Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Care and Safety
Routine Maintenance
Attachments
Body and Framework
Electrics
Controls
Hydraulics
Transmission
Brakes
Steering
Engine
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveJCB 3.0D 4×4, 3.5D 4×4 TELETRUK Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
The document contains an error code list for an ERGOPOWER EST-37 transmission control unit. It lists various error codes, possible causes, and reactions from the transmission control unit. It also provides steps to repair issues and notes additional details like which operating modes the transmission may enter under certain fault conditions.
This document provides information about NC and CNC machines. It discusses the differences between NC and CNC, describing how programs are fed into each type of machine. It also lists and defines common types of machining centers such as horizontal and vertical machining centers. The document then covers the layout and basic operation of turning centers and milling centers. It explains ladder programming and addresses used in ladder diagrams.
Fendt 711 vario tractor service repair manualjjskefkskemik
The document provides safety instructions for working on and repairing the hydraulic system in Fendt tractors. It warns that the pressure pipes and accumulators connected to the central control block are pressurized up to 200 bar even with the engine off. The pressure must be manually relieved before performing any repairs in this area. Special care is required as the "Lock suspension / lower suspension" command does not relieve the pressure.
Fendt 818 vario tractor service repair manualfjskekxswesemm
The document provides safety instructions for working on and repairing the hydraulic system in Fendt tractors. It warns that the pressure pipes and accumulators connected to the central control block are pressurized up to 200 bar even with the engine off. The pressure must be manually relieved before performing any repairs in this area. Failure to do so could result in personal injury or damage. Proper safety precautions and training are required for working on Fendt hydraulic systems.
Fendt 712 vario tractor service repair manualfjskefkemms
The document provides safety instructions for working on and repairing the hydraulic system in Fendt tractors. It warns that the pressure pipes and accumulators connected to the central control block are pressurized up to 200 bar even with the engine off. The pressure must be manually relieved before performing any repairs in this area. Failure to do so could result in personal injury or damage. Proper safety precautions and training are required for working on Fendt hydraulic systems.
This document is a technical manual for 300D, 310D, and 315D backhoe loaders that provides operation and test information. It contains sections on general information, operational checkout procedures, the engine, electrical system, power train, hydraulics, and heating and air conditioning. The general information section covers safety, specifications, torque values, and fuels and lubricants. It provides details on the machine models, their components and systems, capacities, lift capacities, and specifications. The manual is intended to help technicians identify routine failures and contains information organized by component groups.
This is the Highly Detailed factory service repair manual for theJCB 3.0D 4×4, 3.5D 4×4 TELETRUK, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.JCB 3.0D 4×4, 3.5D 4×4 TELETRUK Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Care and Safety
Routine Maintenance
Attachments
Body and Framework
Electrics
Controls
Hydraulics
Transmission
Brakes
Steering
Engine
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveJCB 3.0D 4×4, 3.5D 4×4 TELETRUK Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
The document contains an error code list for an ERGOPOWER EST-37 transmission control unit. It lists various error codes, possible causes, and reactions from the transmission control unit. It also provides steps to repair issues and notes additional details like which operating modes the transmission may enter under certain fault conditions.
This document provides information about NC and CNC machines. It discusses the differences between NC and CNC, describing how programs are fed into each type of machine. It also lists and defines common types of machining centers such as horizontal and vertical machining centers. The document then covers the layout and basic operation of turning centers and milling centers. It explains ladder programming and addresses used in ladder diagrams.
Valtra Valmet 6600 TRACTOR Service Repair Manualjjkmsmnj
This document is a workshop manual for Valtra tractors models 6000-8950. It provides an overview of the manual's layout and conventions used for document organization, codes, and page numbering. It also provides general instructions and safety guidelines for repairs, including how to determine problems, handle heavy components, and ensure cleanliness during repairs.
Valtra Valmet 6850 TRACTOR Service Repair Manualjkdjksmde
This is the Highly Detailed factory service repair manual for theVALTRA VALMET 6850 TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.VALTRA VALMET 6850 TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Electrical System
Power Transmission
Brake System
Steering System and Front Axle
Frame and Wheels
Cab and Shields
Hydraulics
Tools
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveVALTRA VALMET 6850 TRACTOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Jcb 530 120 telescopic handler service repair manual sn 562601fjjskekksmem
This document provides lubrication specifications and fluid capacities for various JCB machine models, including 525, 527, 530, 535 and 537 models. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases and other lubricants. It also provides coolant mixture recommendations and notes that new engines do not require a break-in period and should be used immediately in normal work cycles.
Allison 1000-2000 Series Service Manual.pdfRolandasPetkus
This document provides an overview of the Allison 1000/2000 series transmissions. It describes the key features and components including:
- Five speeds forward with overdrive fifth gear, plus reverse and neutral controlled electronically through six solenoids.
- Planetary gear sets and five clutch packs provide the gear ratios and shifting.
- Fully automatic operation controlled by the transmission control module (TCM).
- Common hydraulic system and oil pump provides pressure for clutches and lubrication.
- Variety of shift selector positions available depending on model and application.
Mitsubishi forklift spare parts manufacturer from zefeng 8618721729659chu aimee
forklift spare parts manufacturer from China , most parts are produced by ourself with competitive offer .
pls contact me : zefengsales5@zefengseal.com
whatsaapp/wechat: +8618721729659
PERKINS 1103 AND 1104 INDUSTRIAL ENGINE(Model DD)Service Repair Manualfusjjekkemmd
The document provides instructions for removing and installing fuel priming pumps and fuel filter bases on 1103 and 1104 Industrial engines. It describes two types of fuel priming pumps and two types of fuel filters. The removal procedure involves disconnecting fuel lines and electrical connectors, removing mounting screws, and draining any fuel. The installation procedure specifies cleaning components and reversing the removal steps, including reconnecting lines, installing screws, and priming the fuel system. Safety precautions are provided to prevent fluid spillage and the entry of contaminants.
The document provides a list of parts and components for assembling the engine and related systems of a tractor. It includes items such as pistons, crankshafts, bearings, valves, hoses, brackets, bolts, and other hardware. The parts are grouped according to the assembly process and applicable tractor models varying by drive type and cab options.
This document provides an overview and instructions for using an electrical wiring diagram manual for the Toyota Avensis Verso/Picnic. It includes:
- A notice about safely handling supplemental restraint systems.
- An introduction explaining the 8 sections of the manual, including indexes, abbreviations, relay locations, wiring routing diagrams, connector lists and an overall wiring diagram.
- Instructions on how to read and use the wiring diagram section, including explanations of the information provided for each component.
- Examples of junction blocks, connectors, and wiring color codes shown in the diagrams.
Repair service manuals and wiring diagrams software and ewdOBD bytes
This document contains a list of Toyota and Lexus electrical wiring diagram (EWD) torrent files from 2006 to 2019, including for many different vehicle models such as the 4Runner, Camry, Corolla, Highlander, Land Cruiser, Prius, RAV4, Sequoia, Sienna, Tacoma, Tundra, Venza, and Yaris. The EWD files provide wiring diagram information for various years, including some that cover multiple years. There are also listings for Mercedes, Bosch, and other automotive technical resources.
Case ih puma 210 tractor service repair manualufjsjekskem
This document is the service manual for Case IH PUMA tractors models 165, 180, 195, 210. It contains sections on the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. Safety rules are provided at the beginning regarding personal safety during maintenance and repair.
This is the Highly Detailed factory service repair manual for thePERKINS 1100 SERIES 1104D INDUSTRIAL ENGINE (MODEL NJ), this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.PERKINS 1100 SERIES 1104D INDUSTRIAL ENGINE (MODEL NJ) Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to havePERKINS 1100 SERIES 1104D INDUSTRIAL ENGINE (MODEL NJ) Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Este documento presenta un manual de servicio para camiones que describe un programa de mantenimiento preventivo. El programa incluye inspecciones periódicas de varios componentes del vehículo como el motor, la transmisión y la suspensión cada 24,000 km o 4 meses para garantizar la seguridad, confiabilidad y vida útil del vehículo. El documento también enfatiza la importancia de llevar registros detallados del mantenimiento para personalizar el programa a las necesidades específicas de cada operación.
FENDT 818 VARIO TRACTOR Service Repair Manualusekmmd
This is the Highly Detailed factory service repair manual for theFENDT 818 VARIO TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.FENDT 818 VARIO TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Tractor / General system
Transmission
Engine
Front axle
Steering
Vehicle body
Air conditioning
Cab
Power lift
Air compressor
Elektrik
Front power lift
Hydraulic pump assembly
Hydraulic
Electronics
Service
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveFENDT 818 VARIO TRACTOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
O documento fornece instruções e especificações técnicas para o uso e manutenção de uma plaina agrícola dianteira, incluindo informações sobre montagem, funcionamento, sistemas hidráulicos e garantia do produto.
Manual de servicio del motor isuzu nos permite probar, diagnosticar para dar servicio de mantenimiento preventivo, correctivo de acuerdo a los datos del fabricante a fin de que el motor opere de acuerdo a los estándares reduciendo la contaminación ambiental, se vera el ajuste de las válvulas o calibración de acuerdo al manual del fabricante. para que opere correctamente.
The document provides information on diagnosing and repairing the A4CF2 4-speed automatic transmission found in certain Hyundai and Kia vehicles. It includes charts identifying transmission components, sensor locations, pressure taps, solenoid identification and function. The transmission uses fully electronic controls and has gear ratios from 2.919 in 1st gear to 0.713 in 4th gear. The document provides extensive information on the valve body operation and diagnosing transmission issues.
Este documento proporciona información de seguridad importante y manual de operación y mantenimiento para varios motores industriales Perkins. Advierte sobre posibles peligros y proporciona instrucciones para operar y mantener los motores de manera segura. También incluye secciones sobre identificación del producto, operación, mantenimiento e información de garantía.
FENDT 716 VARIO TRACTOR Service Repair Manual.pdffujsekmdidjd3e
- The document provides a history of the Favorit 700 tractor range and its evolution into the FENDT 700 and 800 Vario models.
- It describes the different generations of the Favorit 700 from its initial pilot production in 1998 to the introduction of the FENDT 700 Vario in 2003.
- Key milestones included the addition of new models, product updates, and rebranding of the Favorit 700 range as the FENDT 700 and 800 Vario series.
FENDT 712 VARIO TRACTOR Service Repair Manual.pdffujsekmdidjd3e
The document provides safety instructions for working on and repairing the hydraulic system in Fendt tractors. It warns that the pressure pipes and accumulators connected to the central control block are pressurized up to 200 bar even with the engine off. The pressure must be manually relieved before performing any repairs in this area. Failure to do so could result in personal injury or damage. Proper safety precautions and procedures must be followed to avoid risks while working on the pressurized hydraulic system.
Valtra Valmet 6600 TRACTOR Service Repair Manualjjkmsmnj
This document is a workshop manual for Valtra tractors models 6000-8950. It provides an overview of the manual's layout and conventions used for document organization, codes, and page numbering. It also provides general instructions and safety guidelines for repairs, including how to determine problems, handle heavy components, and ensure cleanliness during repairs.
Valtra Valmet 6850 TRACTOR Service Repair Manualjkdjksmde
This is the Highly Detailed factory service repair manual for theVALTRA VALMET 6850 TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.VALTRA VALMET 6850 TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Electrical System
Power Transmission
Brake System
Steering System and Front Axle
Frame and Wheels
Cab and Shields
Hydraulics
Tools
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveVALTRA VALMET 6850 TRACTOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Jcb 530 120 telescopic handler service repair manual sn 562601fjjskekksmem
This document provides lubrication specifications and fluid capacities for various JCB machine models, including 525, 527, 530, 535 and 537 models. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases and other lubricants. It also provides coolant mixture recommendations and notes that new engines do not require a break-in period and should be used immediately in normal work cycles.
Allison 1000-2000 Series Service Manual.pdfRolandasPetkus
This document provides an overview of the Allison 1000/2000 series transmissions. It describes the key features and components including:
- Five speeds forward with overdrive fifth gear, plus reverse and neutral controlled electronically through six solenoids.
- Planetary gear sets and five clutch packs provide the gear ratios and shifting.
- Fully automatic operation controlled by the transmission control module (TCM).
- Common hydraulic system and oil pump provides pressure for clutches and lubrication.
- Variety of shift selector positions available depending on model and application.
Mitsubishi forklift spare parts manufacturer from zefeng 8618721729659chu aimee
forklift spare parts manufacturer from China , most parts are produced by ourself with competitive offer .
pls contact me : zefengsales5@zefengseal.com
whatsaapp/wechat: +8618721729659
PERKINS 1103 AND 1104 INDUSTRIAL ENGINE(Model DD)Service Repair Manualfusjjekkemmd
The document provides instructions for removing and installing fuel priming pumps and fuel filter bases on 1103 and 1104 Industrial engines. It describes two types of fuel priming pumps and two types of fuel filters. The removal procedure involves disconnecting fuel lines and electrical connectors, removing mounting screws, and draining any fuel. The installation procedure specifies cleaning components and reversing the removal steps, including reconnecting lines, installing screws, and priming the fuel system. Safety precautions are provided to prevent fluid spillage and the entry of contaminants.
The document provides a list of parts and components for assembling the engine and related systems of a tractor. It includes items such as pistons, crankshafts, bearings, valves, hoses, brackets, bolts, and other hardware. The parts are grouped according to the assembly process and applicable tractor models varying by drive type and cab options.
This document provides an overview and instructions for using an electrical wiring diagram manual for the Toyota Avensis Verso/Picnic. It includes:
- A notice about safely handling supplemental restraint systems.
- An introduction explaining the 8 sections of the manual, including indexes, abbreviations, relay locations, wiring routing diagrams, connector lists and an overall wiring diagram.
- Instructions on how to read and use the wiring diagram section, including explanations of the information provided for each component.
- Examples of junction blocks, connectors, and wiring color codes shown in the diagrams.
Repair service manuals and wiring diagrams software and ewdOBD bytes
This document contains a list of Toyota and Lexus electrical wiring diagram (EWD) torrent files from 2006 to 2019, including for many different vehicle models such as the 4Runner, Camry, Corolla, Highlander, Land Cruiser, Prius, RAV4, Sequoia, Sienna, Tacoma, Tundra, Venza, and Yaris. The EWD files provide wiring diagram information for various years, including some that cover multiple years. There are also listings for Mercedes, Bosch, and other automotive technical resources.
Case ih puma 210 tractor service repair manualufjsjekskem
This document is the service manual for Case IH PUMA tractors models 165, 180, 195, 210. It contains sections on the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. Safety rules are provided at the beginning regarding personal safety during maintenance and repair.
This is the Highly Detailed factory service repair manual for thePERKINS 1100 SERIES 1104D INDUSTRIAL ENGINE (MODEL NJ), this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.PERKINS 1100 SERIES 1104D INDUSTRIAL ENGINE (MODEL NJ) Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to havePERKINS 1100 SERIES 1104D INDUSTRIAL ENGINE (MODEL NJ) Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Este documento presenta un manual de servicio para camiones que describe un programa de mantenimiento preventivo. El programa incluye inspecciones periódicas de varios componentes del vehículo como el motor, la transmisión y la suspensión cada 24,000 km o 4 meses para garantizar la seguridad, confiabilidad y vida útil del vehículo. El documento también enfatiza la importancia de llevar registros detallados del mantenimiento para personalizar el programa a las necesidades específicas de cada operación.
FENDT 818 VARIO TRACTOR Service Repair Manualusekmmd
This is the Highly Detailed factory service repair manual for theFENDT 818 VARIO TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.FENDT 818 VARIO TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Tractor / General system
Transmission
Engine
Front axle
Steering
Vehicle body
Air conditioning
Cab
Power lift
Air compressor
Elektrik
Front power lift
Hydraulic pump assembly
Hydraulic
Electronics
Service
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveFENDT 818 VARIO TRACTOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
O documento fornece instruções e especificações técnicas para o uso e manutenção de uma plaina agrícola dianteira, incluindo informações sobre montagem, funcionamento, sistemas hidráulicos e garantia do produto.
Manual de servicio del motor isuzu nos permite probar, diagnosticar para dar servicio de mantenimiento preventivo, correctivo de acuerdo a los datos del fabricante a fin de que el motor opere de acuerdo a los estándares reduciendo la contaminación ambiental, se vera el ajuste de las válvulas o calibración de acuerdo al manual del fabricante. para que opere correctamente.
The document provides information on diagnosing and repairing the A4CF2 4-speed automatic transmission found in certain Hyundai and Kia vehicles. It includes charts identifying transmission components, sensor locations, pressure taps, solenoid identification and function. The transmission uses fully electronic controls and has gear ratios from 2.919 in 1st gear to 0.713 in 4th gear. The document provides extensive information on the valve body operation and diagnosing transmission issues.
Este documento proporciona información de seguridad importante y manual de operación y mantenimiento para varios motores industriales Perkins. Advierte sobre posibles peligros y proporciona instrucciones para operar y mantener los motores de manera segura. También incluye secciones sobre identificación del producto, operación, mantenimiento e información de garantía.
FENDT 716 VARIO TRACTOR Service Repair Manual.pdffujsekmdidjd3e
- The document provides a history of the Favorit 700 tractor range and its evolution into the FENDT 700 and 800 Vario models.
- It describes the different generations of the Favorit 700 from its initial pilot production in 1998 to the introduction of the FENDT 700 Vario in 2003.
- Key milestones included the addition of new models, product updates, and rebranding of the Favorit 700 range as the FENDT 700 and 800 Vario series.
FENDT 712 VARIO TRACTOR Service Repair Manual.pdffujsekmdidjd3e
The document provides safety instructions for working on and repairing the hydraulic system in Fendt tractors. It warns that the pressure pipes and accumulators connected to the central control block are pressurized up to 200 bar even with the engine off. The pressure must be manually relieved before performing any repairs in this area. Failure to do so could result in personal injury or damage. Proper safety precautions and procedures must be followed to avoid risks while working on the pressurized hydraulic system.
FENDT 815 VARIO TRACTOR Service Repair Manual.pdffujsekmdidjd3e
- The Fendt 700 tractor range has gone through several generations, starting as the Favorit 700 in 1998 and evolving into the FENDT 700 Vario by 2003.
- The FENDT 800 Vario models were introduced in 2001 as higher horsepower additions to the 700 range.
- Major updates included the introduction of Variotronic 2 controls in 2001, and a transition to the FENDT brand name and new designs starting in 2003.
- The tractors have been built in multiple variants including the 711, 712, 714, 716, and 800 series models.
FENDT 818 VARIO TRACTOR Service Repair Manual.pdffujsekmdidjd3e
The document provides safety instructions for working on and repairing the hydraulic system in Fendt tractors. It warns that high pressure pipes and accumulators connected to the central control block are pressurized to 200 bar even with the engine off. The pressure must be manually relieved before performing any repairs in this area. Failure to do so could result in personal injury or damage. Proper safety precautions and training are required for repair work.
FENDT 817 VARIO TRACTOR Service Repair Manual.pdffujsekmdidjd3e
- The document provides a history of the Favorit 700 tractor range and its evolution into the FENDT 700 and 800 Vario models.
- It describes the different generations of the Favorit 700 from its initial pilot production in 1998 to the introduction of the FENDT 700 Vario in 2003.
- Key milestones included the addition of new models, product updates, and rebranding of the Favorit 700 range as the FENDT 700 and 800 Vario series.
FENDT 714 VARIO TRACTOR Service Repair Manual.pdffujsekmdidjd3e
The document provides safety instructions for working on and repairing the hydraulic system in Fendt tractors. It warns that the pressure pipes and accumulators connected to the central control block are pressurized up to 200 bar even with the engine off. The pressure must be manually relieved before performing any repairs in this area. Failure to do so could result in personal injury or damage. Proper safety precautions and training are required for working on Fendt hydraulic systems.
FENDT 711 VARIO TRACTOR Service Repair Manual.pdffujsekmdidjd3e
- The document provides a history of the Favorit 700 tractor range, including the transition to the FENDT 700 and 800 Vario models.
- It describes the different generations of the Favorit 700 from 1998 to 2001 and the introduction of the FENDT 800 Vario in 2001.
- The history outlines the various chassis number ranges for each model and generation.
FENDT 716 VARIO TRACTOR Service Repair Manual.pdfufjjksemd8id9i
- The document provides a history of the Favorit 700 tractor range and its evolution into the FENDT 700 and 800 Vario models.
- It describes the different generations of the Favorit 700 from its initial pilot production in 1998 to the introduction of the FENDT 700 Vario in 2003.
- Key milestones included the addition of new models, product updates, and rebranding of the Favorit 700 range as the FENDT 700 and 800 Vario series.
FENDT 711 VARIO TRACTOR Service Repair Manual.pdfufjjksemd8id9i
The document provides safety instructions for working on and repairing the hydraulic system in Fendt tractors. It warns that the pressure pipes and accumulators connected to the central control block are pressurized up to 200 bar even with the engine off. The pressure must be manually relieved before performing any repairs in this area. Failure to do so could result in personal injury or damage. Proper safety precautions and training are required for working on Fendt hydraulic systems.
FENDT 817 VARIO TRACTOR Service Repair Manual.pdfufjjksemd8id9i
The document provides safety instructions for working on and repairing the hydraulic system in Fendt tractors. It warns that the pressure pipes and accumulators connected to the central control block are pressurized up to 200 bar even with the engine off. The pressure must be manually relieved before performing any repairs in this area. Failure to do so could result in personal injury or damage. Proper safety precautions and relieving hydraulic pressure are essential when working on the hydraulic system.
FENDT 714 VARIO TRACTOR Service Repair Manual.pdfufjjksemd8id9i
The document provides safety instructions for working on and repairing the hydraulic system in Fendt tractors. It warns that the pressure pipes and accumulators connected to the central control block are pressurized up to 200 bar even with the engine off. The pressure must be manually relieved before performing any repairs in this area. Failure to do so could result in personal injury or damage. Proper safety precautions and adherence to repair instructions are emphasized throughout.
FENDT 818 VARIO TRACTOR Service Repair Manual.pdfufjjksemd8id9i
- The document provides a history of the Favorit 700 tractor range and its evolution into the FENDT 700 and 800 Vario models.
- It describes the different generations of the Favorit 700 from its initial pilot production in 1998 to the introduction of the FENDT 700 Vario in 2003.
- Key milestones included the addition of new models, product updates, and rebranding of the Favorit 700 range as the FENDT 700 and 800 Vario series.
FENDT 815 VARIO TRACTOR Service Repair Manual.pdfufjjksemd8id9i
- The Fendt 700 tractor range has gone through several generations, starting as the Favorit 700 in 1998 and evolving into the FENDT 700 Vario by 2003.
- The FENDT 800 Vario models were introduced in 2001 as higher horsepower additions to the 700 range.
- Major updates included the introduction of Variotronic 2 controls in 2001, and a transition to the FENDT brand name and new designs starting in 2003.
- The tractors have been built in multiple variants including the 711, 712, 714, 716, and 800 series models.
FENDT 712 VARIO TRACTOR Service Repair Manual.pdfufjjksemd8id9i
The document provides safety instructions for working on and repairing the hydraulic system in Fendt tractors. It warns that the pressure pipes and accumulators connected to the central control block are pressurized up to 200 bar even with the engine off. The pressure must be manually relieved before any repairs are done to avoid injury or damage. Proper safety precautions and training are required for repair work.
Fendt 716 vario tractor service repair manualfjjksekfksmem
The document provides safety instructions for working on and repairing the hydraulic system in Fendt tractors. It warns that the pressure pipes and accumulators connected to the central control block are pressurized up to 200 bar even with the engine off. The pressure must be manually relieved before performing any repairs in this area. Special care is required as the "Lock suspension / lower suspension" command does not relieve the pressure.
Liebherr a900 c zw edc f.d. litronic hydraulic excavator service repair manualkjmes eidkm
This document is a service manual for a Liebherr A 900 C-ZW EDC F.D. hydraulic excavator. It provides instructions for maintenance, repair, and proper use of the excavator. Safety is emphasized, including only allowing trained personnel to operate and service the machine, and ensuring all safety regulations and guidelines are followed to prevent injuries to operators and others. The intended use of the excavator is described as loosening, handling, transporting, and dumping materials while following appropriate safety measures if moving while loaded.
This document provides instructions for repairing the chassis and body of Toyota Hilux vehicles that underwent changes in May 1998. It begins with an introduction on how to use the repair manual, including an overview of the document structure and definitions of terms. The document then provides information on vehicle identification and specifications. It also includes general repair instructions and precautions to follow when lifting or working on vehicles.
This document provides an overview and instructions for operating a machine tool controlled by the SINUMERIK 840D sl control system. It covers topics such as the machine work station, operator interface, measuring the workpiece zero point, manual and automatic modes of operation, tool management, and work offsets. The document is intended as a guide for machine operators.
This document provides a workshop manual for repairing Porsche 928 vehicles. It begins with an overview and structure of the manual. The manual is divided into repair groups covering the engine, transmission, chassis, body, and electrical systems. For each repair group, the manual provides exploded diagrams, disassembly and assembly instructions, specifications, and other details to guide mechanics in repairs. It aims to provide all necessary information to keep the vehicles in safe operating condition.
Similar to Fendt 711 vario tractor service repair manual (20)
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Globalfleet - global fleet survey 2021 full results
Fendt 711 vario tractor service repair manual
1. Workshopmanual
FENDT 700 / 800 Vario
FENDT 711 Vario from chassis no. 711/../8001-
FENDT 712 Vario 712/../8001-from chassis no.
FENDT 714 Vario 714/../8001-from chassis no.
FENDT 716 Vario 716/../8001-from chassis no.
Edition
08/2006
Service-Training
Dokumentation
X990.005.051.010 - Englisch
PSD bo 3188 G - en
Johann-Georg-Fendt-Str. 4 D-87616 Marktoberdorf
AGCO GmbH
FENDT 815 Vario 715/../1001-from chassis no.
FENDT 817 Vario 717/../1001-from chassis no.
FENDT 818 Vario 718/../1001-from chassis no.
Book1Book1
2. All types Tractor / General system
Assembly overview A
General
04/2000 0000 000009Ab 1/4
Capitel Docu-No.IndexDate Version Page
Assembly overview
Text-module
Text-module
Text-module
Text-module
0000 Tractor / General system
1000 Transmission
1005 Transmission control unit
1010 Differential
1015 Axle drive
1030 Handbrake
1050 Housing
1070 Brake system
1080 Vario transmission unit
1090 Emergency control
1100 Clutch actuation system
1150 Cardan brake
1170 ML range control
1200 Front PTO
1220 Live PTO
1320 Front-wheel drive
1430 Hydrodamp
1432 Hydraulic pump
1470 Transmission lubrication system
1490 Pump drive
1530 ML adjustment
1600 Enhanced control system valves
1620 Enhanced control system pipes
2000 Engine
2010 Cylinder head
2020 Speed adjustment
2050 Cooling system
2060 Fuel system
2170 Engine brake
2180 Cold-start system
2190 Intercooler
2210 Crankcase
2250 Engine preheater
2312 Lubrication
2710 Injection pump
2712 Injectors
2714 Governor
3. All types Tractor / General system
Assembly overview A
General
04/2000 0000 000009Ab 2/4
Capitel Docu-No.IndexDate Version Page
Assembly overview
Text-module
Text-module
Text-module
Text-module
Text-module
Text-module
3000 Front axle
3010 Front axle support
3020 Axle housing
3050 Suspension
3060 Suspension valve fitting
3070 Suspension pipe
3100 Track rod
3120 Steering cylinder
3170 Frame
3180 Cardan shaft
3190 Diff. lock actuation system
4000 Steering
4070 Steering wheel
4090 Hydraulic steering assembly
5000 Vehicle body
5010 Design
5030 Driver seat
5050 Trailer hitch
5161 Trailer hitch coupling
5200 Cab mount, suspension
5500 Air conditioning system
5520 Compressor drive
5530 Coolant lines
5550 Evaporator
5560 Condenser
5570 Electrical cables
8100 Cab
8113 Heater
8114 Ventilation
8117 Windscreen wipers
8121 Cable loom
8600 Power lift
8610 Electrohydraulic EPC control
8618 External control
8631 Control lifting gear
8700 Three-point hitch
8730 Lift arms
8740 Support
4. All types Tractor / General system
Assembly overview A
General
04/2000 0000 000009Ab 3/4
Capitel Docu-No.IndexDate Version Page
Assembly overview
Text-module
Text-module
Text-module
Text-module
Text-module
Text-module
Text-module
8800 Compressed air system
8810 Compressor
8820 Brake fittings
8830 Lines
8850 Electrical actuation system
8890 Air tank
8900 Front loader
8910 Mounting frame
8915 Hydraulic implement actuation system
8955 3. hydraulic circuit
8958 Multi-coupling
8970 Pipes
8990 Lift cylinder
9000 Electrics
9010 Alternator
9015 Starter lockout
9040 Fuses
9050 Battery system
9060 Starter motor system
9200 Front power lift
9210 Lift gear
9211 External control
9220 Cylinder
9230 Pipes
9260 Enhanced control power lift
9280 Frame
9400 Hydraulic pump assembly
9410 LS pump
9420 Transmission pump
9430 Steering pump
9500 Hydraulic pipes
9510 Base circle
9516 Power lift
9525 with oil cooler
9530 Hydraulic trailer brake
9531 Steering
9534 Reversing system
5. All types Tractor / General system
Assembly overview A
General
04/2000 0000 000009Ab 4/4
Capitel Docu-No.IndexDate Version Page
Assembly overview
Text-module
Text-module
9600 Hydraulic equipment
9605 Hydraulic connections
9610 Central control block (ZSB)
9620 Valve assembly
9666 External pressure supply
9690 Valve supplement
9700 Electronics
9710 Instrument panel
9715 Terminal
9717 LBS - agricultural bus system
9720 Transducer
9730 Radar sensor
9740 E-box
9750 Transmission actuator unit
9760 Drive switch
9770 Control panel
9780 Engine EDC
9790 ECU, lift gear
9900 Service
9920 Special tools
9970 FENDIAS
6. All types
Documentation structure A
General
12.4.2000 0000 000011Ab 1/2
Capitel Docu-No.IndexDate Version Page
Documentation structure
Text-module
The basic principle of this documentation is that the different tractor types are divided into main assem-
blies, which correspond to the FENDOS structure with a few exceptions for technical reasons.
These main assemblies are, for example, "0000 - Tractor/General system" ; "1000 - Transmission";
"2000 - Engine", etc.
The main assemblies are sub-divided into subassemblies, e.g. "1005 - Transmission control unit";
"1220 - Live PTO", etc.
Please see document 0000 A 000009 for an overview of the assemblies.
Each assembly is subdivided into various registers which are labelled with an index letter.
These are as follows.
This documentation is made up of a large number of self-contained individual documents
(=worksheets). These documents can be used for various applications and are available in
different languages.
Each document is given a unique document code (8), which is made up of the chapter no. (1)
(=assembly / subassembly), the index letter (2), and the document no. (3), printed on the right of the
footer.
A document can, therefore, be clearly assigned to a main assembly/subassembly and the index.
Explanation of the header and footer:
PM-Picturemodule
Text-module
PM-Pictur
A - General E - Measuring and testing
B - Faults F - Settings and calibration
C - Documents and plans G - Repairs
D - Position of components H - Service - Information
PMTAB_Picture
a Index letter d Validity: chassis no.
b Chapter / section e Other notes on validity
c Type validity
7. All types
Documentation structure A
General
12.4.2000 0000 000011Ab 2/2
Capitel Docu-No.IndexDate Version Page
Documentation structure
emodule
Text-module
Text-module
Page numbering for all assemblies is continuous, starting from page 1.
Text
-module
The document codes are not necessarily sequential, i.e. gaps may occur.
"Document no." is not the number of pages in the documentation. The page count is shown on the right
in the list of contents.
PMTAB_Picture
1 Main assembly / subassembly 5 No. of pages in document
2 Index 6 Revision status
3 Document no. 7 Date created
4 Section 8 Document code
8. Tractor / General system
Notes on documentation A
General
26.03.2001 0000 000021Aa 1/1
Capitel Docu-No.IndexDate Version Page
Notes on documentation
Text-module
Please note
This Workshop Manual gives the trained expert model-specific information for the repair of our tractors.
It is assumed that the commercially available tools and general equipment to be found in a normal
workshop will be available. Special tools are kept to the absolute minimum, and are shown both at the
point where they are used and in a summary at the end of the manual.
If parts have to be replaced, only genuine spare parts may be used. When ordering parts, please
always quote the chassis number indicated in the relevant valid spares documentation. Assemblies are
divided up in the Workshop Manual in the same way as in FENDOS.
Maintenance documentation and technical specifications must also be taken into account by
workshops. When repairs are completed, the person responsible must carry out a test drive to ensure
that the tractor is roadworthy and in perfect condition.
We reserve the right to make design changes in the interests of technical progress.
Text-module
Notes on Index G - Repairs
The present disassembly / reassembly instructions represent the design status at the time the
Workshop Manual was produced.
Technical refinements and developments of the product appearing in the various versions may require
different work procedures - qualified technicians will find these no more difficult to perform.
These disassembly and reassembly instructions will be superseded by publication of the next edition.
Text-module
Important notes on safety at work
In principle, those carrying out repairs are responsible for their own safety while working.
It is essential to comply with all applicable safety regulations and statutory requirements in
order to avoid personal injury and damage to the product during maintenance and repair work.
Repair staff must familiarise themselves with such regulations and requirements before
starting work.
For the proper repair of Fendt products, it is assumed that the work is carried out by appropriately
trained personnel.
It is the responsibility of the workshop to provide such training.
Text-module
The following are used in this manual to draw attention to safety issues
Text-module
Read the relevant instructions thoroughly before starting any tests or repair work.
The photos, drawings and components used do not always represent the original product; they are
intended to illustrate the work procedure.
Photos, drawings, and components are not to scale, and should not be used for deducing size and
weight (even when these are in the same illustration).
This pictogram indicates situations where insufficient care may result in personal injury or
damage to the product.
9. Farmer 400 Fav 700
FENDT 800 / 900 Vario
Fav 900
Working and steering hydraulics / General system
Safety instructions and measures A
General
12/1999 0000 000012Aa 1/1
Capitel Docu-No.IndexDate Version Page
Safety instructions and measures
Central control block
Text-module
Reason:
Bullet-List
● The pressure pipes of the front suspension between the central control block ZSB and the
suspension cylinders,
● the accumulators ASP1 and ASP2 on the central control block and
● the piped accumulator ZSP
are subject to a pressure of 200 bar even with the engine switched off and the suspension
lowered (=locked).
Action:
The pressure ß must be relieved manually before any repair is carried out or anything is released or
opened in this area.
Note:
The "Lock suspension / lower suspension" command has no effect.
Steps:
PM-Picturemodule
PM-Picturemodule
Text-module
Check:
Emptying of accumulator sounds like flowing liquid as oil temperature increases
(scarcely audible in winter).
Note and comparison:
For tractors without a central control block (e.g. Fav 500) it is still necessary to relieve pressure using
the external power supply method.
PMTAB_Picture
1. Loosen stopcock item A (stopcock is labelled
AV2 in further documents and circuit diagrams) on
top of central control block by approx. 1 turn
anti-clockwise.
PMTAB_Picture
2. Loosen stopcock item B (stopcock is labelled
AV1 in further documents and circuit diagrams) on
bottom of central control block by approx. 1 turn
anti-clockwise.
10. All types Tractor / General system
Tightening torques for bolts in Nm A
General
03/2000 0000 000007Aa 1/1
Capitel Docu-No.IndexDate Version Page
Tightening torques for bolts in Nm
Text-module
Coefficient of friction: µ total 0.14 for nuts and bolts without aftertreatment and for phosphated nuts.
Tighten by hand.
Tightening torques, unless otherwise specified, can be taken from the following table.
PM-Picturemodule
PMTAB_Picture
11. Fav 700
FENDT 700 Vario
FENDT 800 Vario
Tractor / General system
History of the Favorit 700 tractor range A
General
22.10.2003 0000 000050Ad 1/5
Capitel Docu-No.IndexDate Version Page
History of the Favorit 700 tractor range
PM-Picturemodule
Favorit 700 (711, 712, 714, 716) (21/0101 and up)
PMTAB_Picture
12. Fav 700
FENDT 700 Vario
FENDT 800 Vario
Tractor / General system
History of the Favorit 700 tractor range A
General
22.10.2003 0000 000050Ad 2/5
Capitel Docu-No.IndexDate Version Page
History of the Favorit 700 tractor range
PM-Picturemodule
PM-Picturemodule
FENDT 700 Vario (711, 712, 714, 716) (21/8001 and up)
PMTAB_Picture
FENDT 800 Vario (715, 717, 718) (21/0101 and up)
PMTAB_Picture
13. Fav 700
FENDT 700 Vario
FENDT 800 Vario
Tractor / General system
History of the Favorit 700 tractor range A
General
22.10.2003 0000 000050Ad 3/5
Capitel Docu-No.IndexDate Version Page
History of the Favorit 700 tractor range
Text-module
Favorit 700 (Generation 1 - from October 1998)
Favorit 714 / 21 / 0101 ... 1000 and 716 / 21 / 0101 ... 1000 (pilot production (approx. 50 tractors)
from August 1998)
Favorit 714 / 21 / 1001 ... 1139 (1 series from October 1998)
Favorit 716 / 21 / 1001 ... 1354 (1 series from October 1998)
Favorit 714 / 21 / 1139 ... 2000 (redesign of the 1 series)
Favorit 716 / 21 / 1354 ... 2000 (redesign of the 1 series)
Text-module
Favorit 700 (Generation 2 from November 1999 "Agritechnica")
Favorit 711 / 21 / from 1001 (series start)
Favorit 712 / 21 / from 1001 (series start)
Favorit 714 / 21 / from 2001 (2 series )
Favorit 716 / 21 / from 2001 (2 series)
Text-module
Favorit 700 (Generation 2, Variotronic 2 product update starting
November 2001 'Agritechnica')
Favorit 711 / 21 / 1721 and up, retrofit Chassis No. 21/1001 and up
Favorit 712 / 21 / 2309 and up, retrofit Chassis No. 21/1001 and up
Favorit 714 / 21 / 3450 and up, retrofit Chassis No. 21/2001 ('1 - Box tractor') and up
Favorit 716 / 21 / 4715 and up, retrofit Chassis No. 21/2001 ('1 - Box tractor') and up
Text-module
FENDT 800 Vario (Generation 1 from November 2001 'Agritechnica') /
FENDT 700 Vario (Generation 3 from September 2003)
715 / 21 / from 0101 - FENDT 815 Vario
717 / 21 / from 0101 - FENDT 817 Vario
718 / 21 / from 0101 - FENDT 818 Vario
711 / 21 / from 8001 - FENDT 711 Vario
712 / 21 / from 8001 - FENDT 712 Vario
714 / 21 / from 8001 - FENDT 714 Vario
716 / 21 / from 8001 - FENDT 716 Vario
Text-module
FENDT 800 Vario (Generation 2 from September 2004 "Field Day Wadenbrunn")
/ FENDT 700 Vario (Generation 4 from September 2004 "Field Day
Wadenbrunn") ("stepless roof blower" and "external actuation of auxiliary
control valves")
715 / 21 / from 2001 - FENDT 815 Vario
717 / 21 / from 2001 - FENDT 817 Vario
718 / 21 / from 4001 - FENDT 818 Vario
711 / 21 / from 9001 - FENDT 711 Vario
712 / 21 / from 9001 - FENDT 712 Vario
714 / 21 / from 9001 - FENDT 714 Vario
716 / 21 / from 9501 - FENDT 716 Vario
14. Fav 700
FENDT 700 Vario
FENDT 800 Vario
Tractor / General system
History of the Favorit 700 tractor range A
General
22.10.2003 0000 000050Ad 4/5
Capitel Docu-No.IndexDate Version Page
History of the Favorit 700 tractor range
Text-module
Type /
equipment 711 712 714 716 715 "815" 717 "817" 718 "818"
Vario -
transmis-
sion
ML 130 ML 160
../5176 and
up
../5481 and
up
../5570 and
up
../6105 and
up
ML 160
../8001 and up B039 - high pressure sensor 2 'push
detection'
B039 - high pressure sensor 2 'push detection' Y053 - solenoid valve, cardan brake
'active parking function'Y053 - solenoid valve, cardan brake 'active parking
function'
Rear axle HA 110 HA 130 HA 160
Speed
selector,
rear PTO
electric/hydraulic mechanical electric/hydraulic
../2001 and up electric/
hydraulic
Engine BF 6M 2013
Cold start
aid
Cold-start aid Heating flange
../8001 and up
Heating flange
Governor centrifugal EMR 2
../8001 and up
EMR 2
Belt drive with auxiliary deflection roller without auxiliary deflection roller
../8001 and up
without auxiliary deflection roller
Open fan --- --- ../9256 ../9850 ../2057 ../2055 ../4538
Front axle ZF APL - 2000 / F6 ZF APL - 2000 / F7 DANA 745 - 110
../8025 and
up
../8062 and
up
../5986 and
up
../6847 and
up
DANA 735 - 110 DANA 745 - 110
Cab max. 38' - tyres possible max. 42' - tyres possible
../8001 and up - max.
42' - tyres possible
Cab sus-
pensi-
on"rear
mechanical suspension (shock absorber and spring bracket) (detached design)
../9001 and up ../9501 and
up
../2001 and up ../4001 and
up
mechanicalsuspension(springstrut"helicalspring
and shock absorber") (standard)
pneumatic suspension (spring strut
"air spring bellows and shock
absorber") (standard)pneumatic suspension (spring strut "air spring
bellows and shock absorber") (optional)
15. Fav 700
FENDT 700 Vario
FENDT 800 Vario
Tractor / General system
History of the Favorit 700 tractor range A
General
22.10.2003 0000 000050Ad 5/5
Capitel Docu-No.IndexDate Version Page
History of the Favorit 700 tractor range
Rear
power lift
Bosch EPC - C Bosch EPC - OBE
../8001 and up EPC OBE
Working
and
steering
hydraulics
Control pump (110 l/min)
Bosch SB 23 auxiliary control valve (max. 80 l/min)
and a CAN baudrate of 100 kBit/s
Bosch SB 23 auxiliary control valve
(max.80l/min)andaCANbaudrateof
250 kBit/sfrom ../8001 and up, CAN baudrate of 250 kBit/s
../9001 and up ../9501 and
up
../2001 and up ../4001 and
up
External valve actuation (optional) External valve actuation (standard)
Electrics 3-speed roof blower
../9001 and up ../9501 and
up
../2001 and up ../4001 and
up
Steplessly adjustable roof blower (retrofit possible)
Compact plug for A015 - radio
Trailer ABS socket (anti-lock braking system) (optional)
Electro-
nics
A002 - ECU, enhanced
control '1 - Box'
A001ECU,transmission
and A002 - ECU, enhan-
ced control '2 - Box'
A002 - ECU, enhanced control
'1 - Box'
../2001 and up --
A002 - ECU, enhanced
control '1 - Box'
Electro-
nics box
(software
program-
ming),
Replace EPROM Flash programmable
from ../8001 and up flash programmable Note:
Flash = the EPROM can not be overwritten with
EOL.
Software Variotronic 1.0 Variotronic TI / TMS
../1721 and
up
../2309 and
up
../3450 and
up
../4715 and
up
Variotronic 2.0
../1001 and up ../2001 and up
can be updated to Variotronic 2.0
../8001 and up Variotronic TI / TMS (optional)
../9001 and up ../9501 and
up
../2001 and up ../4001 and
up
Variotronic TI / TMS "Generation 2" (optional) Variotronic TI / TMS "Generation 2"
(TMS engine speed can be limited, in pedal mode the joystick can be used to decelerate)
Note: Variotronic TI / TMS "Generation 2" can be retrofitted via EOL.
Additional
equipment
../8001 and up ../1001 and up
Auto-Guide System (automatic steering system (optional)
Type /
equipment 711 712 714 716 715 "815" 717 "817" 718 "818"
16. FENDT 700 Vario
FENDT 800 Vario
FENDT 900 Vario
Tractor / General system
Tractor diagnostics with terminal A008 (Variotronic Ti) A
GeneralFENDT 711 / 712 / 714 / 716 Vario and up .. / 8001
10.10.2002 0000 000042Ab 1/4
Capitel Docu-No.IndexDate Version Page
Tractor diagnostics with terminal A008 (Variotronic Ti)
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Ignition ON
Press F5 to switch to second main menu level.
PMTAB_Picture
Main menu level two is displayed.
Press F5 to switch to third main menu level.
PMTAB_Picture
Main menu level two is displayed.
Press F4 to open Screen Brightness menu.
PMTAB_Picture
The Screen Brightness menu is displayed.
Press F3 to open Diagnostics Menu 1.
17. FENDT 700 Vario
FENDT 800 Vario
FENDT 900 Vario
Tractor / General system
Tractor diagnostics with terminal A008 (Variotronic Ti) A
GeneralFENDT 711 / 712 / 714 / 716 Vario and up .. / 8001
10.10.2002 0000 000042Ab 2/4
Capitel Docu-No.IndexDate Version Page
Tractor diagnostics with terminal A008 (Variotronic Ti)
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Diagnostics Menu 1 is displayed.
● IDEAL - target value for transmission ratio from
A034 - joystick
● VE - feedback from the incremental encoder of
the A009 - actuator unit
● REAL - actual transmission adjustment in the
transmission unit ( B014 - sensor, accumulator
shaft).
● Memo- Bar indicator for programmed change
of driving direction.
IDEAL / VE / REAL is represented graphically by a
bar indicator, and a decimal value from +10000
(forward) to -10000 (reverse) is also displayed. If
the transmission adjustment is OK, the decimal
values and bar indicator are approximately the
same.
Press F2 to change to the Engine Speed Menu.
Press ESC to return to Screen Brightness Menu.
PMTAB_Picture
The Engine Speed Display menu is displayed
Press ESC to return to Diagnostics Menu 1.
Diagnostics Menu 1 is displayed.
Press F3 to open Diagnostics Menu 2.
18. FENDT 700 Vario
FENDT 800 Vario
FENDT 900 Vario
Tractor / General system
Tractor diagnostics with terminal A008 (Variotronic Ti) A
GeneralFENDT 711 / 712 / 714 / 716 Vario and up .. / 8001
10.10.2002 0000 000042Ab 3/4
Capitel Docu-No.IndexDate Version Page
Tractor diagnostics with terminal A008 (Variotronic Ti)
PM-Picturemodule
Text-module
Bullet-List
● High pressure - transmission sensor - Sensor B008, displays oil pressure in the transmission high
pressure circuit. (bar)
● Transmission - Action - Priority - Function, indicates the current control status of the transmission.
(1. activation, 2. joystick, 3. rapid reverse, 4. clutch, 5. range selector, 6. maximum output control,
7. end speed control, 8. hydrostat pressure limiter , 9. engine stall protection, 10. engine overspeed
protection, 11. cruise control, 12. emergency operation, 13. accelerator pedal, 14. none (default)).
● CAN1 messages: - total CAN messages transferred via protocol 1 and 2. Display shows messages
per second.
● Target speed accelerator potentiometer B029 shows target engine speed. (rpm)
● The fault status for CAN overruns and CAN warnings are shown as LED's, in fault-free status both
LED's are green. Overruns occur when the CAN controller receives so many messages, that the
processing of hardware interrupts can not be carried out fast enough. Warnings are reported when
the internal error counter exceeds a specific value. That means that the bus is malfunctioning.
● Temperature sensor discharge B009 , shows discharge temperature from the transmission high
pressure circuit. (Temperatures under 50°C are shown as 'Temp. < 50°C'; temperatures over 120°C
are shown as 'Temp. > 120°C' )
● Software Version, indicates the terminal's software version.
● Hardware Version (Release), indicates the terminal's hardware version.
● Load counter of the A002 - ECU, enhanced control. If the ECU is unloaded (few signals are
analysed), a value of around 22000 is indicated; if ECU loading is increasing, a lower value is
shown.
Text-module
Press F3 to return to Diagnostics Menu 1 and continue back to the Screen Brightness menu with
ESC .
PM-Picturemodule
PMTAB_Picture
Diagnostics Menu 2 is displayed.
Press F1 to display the project version and the
date created. This is only displayed while F1 is
being pressed.
Press F3 to open Diagnostics Menu 1.
PMTAB_Picture
The Screen Brightness menu is displayed.
Press F2 to change to the ISO / LBS Diagnostics
Menu.
19. FENDT 700 Vario
FENDT 800 Vario
FENDT 900 Vario
Tractor / General system
Tractor diagnostics with terminal A008 (Variotronic Ti) A
GeneralFENDT 711 / 712 / 714 / 716 Vario and up .. / 8001
10.10.2002 0000 000042Ab 4/4
Capitel Docu-No.IndexDate Version Page
Tractor diagnostics with terminal A008 (Variotronic Ti)
PM-Picturemodule
Text-module
Note:
The Diagnostics Terminal is no substitute for transmission pressure measurements or electrical
readings.
The Diagnostics Terminal provides a reference value for the Vario transmission functions and
CAN system.
Possible applications:
Bullet-List
● Tractor - loss of power (Question: Transmission or engine? )
● Transmission is too hot (Question: How high is the transmission discharge temperature during
different operations?)
● Checking the specified engine speed
PMTAB_Picture
The ISO / LBS Diagnostics menu is displayed.
● Delete all implement projects from the
Varioterminal - for the case that problems
with the implement project occur, all implement
projects can be removed from the terminal
memory here. To remove the implement
projects press the key F2 .
● ISO / LBS bit rate recognition status: - indicates
the status of automatic bit rate recognition (rate
of data transfer between tractor and
implement).
● ISO / LBS Bus- status of the ISO / LBS bus.
● Status Joystick - indicates if joystick is
assigned to the tractor or the implement.
● ISO / LBS messages: - shows how many
messages are being transferred per second.
Change back to the Main Menu by pressing ESC
several times.
20. FENDT 700 Vario Tractor / General system
Technical specifications FENDT 700 Vario A
GeneralFENDT 700 from ../ 8001
20.06.2006 0000 000081Aa 1/4
Capitel Docu-No.IndexDate Version Page
Technical specifications FENDT 700 Vario
Text-module
Model 711 712
Engine
Type of engine BF6M 2013-C BF6M 2013-C
Turbocharger / intercooler with / with with / with
No. of cylinders / cooling 6 / water 6 / water
Bore / stroke mm 98 /126 98 / 126
Effective displacement l 5.7 5.7
Idle speed rpm 780 ±30 780 ±30
Rated speed rpm 2100 2100
No-load engine speed rpm 2250 ±25 2250 ±25
Fuel l 300 300
Engine stop electrical electrical
Noise level at driver's ear dB(A) 72 72
Angle of engine
Tractor stability must be guaranteed
Lengthwise in travel direction front / rear degree 25 25
Across travel direction left / right degree 25 25
Weights and dimensions
At 50 km/h, with the following tyres and tracks
Tyres front 420/70R28 420/70R28
Tyres rear 520/70R38 520/70R38
Track width front mm 1880 1880
Track width rear mm 1860 1860
Overall length mm 4615 4615
Overall width mm 2429 2429
Overall height mm 2859 2859
Ground clearance mm 528 528
Wheelbase mm 2700 2700
Flange centre distance front mm 1860 1860
Flange centre distance rear mm 1716 1716
Min. turning circle radius without / with steering brake M 5.5/4.9 5.5/4.9
Kerb weight kg 6170 6170
Permissiblegrossweightwithspringaccumulatorhand
brake
kg 10500 10500
Permissible gross weight with mechanical hand brake kg 9500 9500
Permissible maximum front axle load kg 4120 4120
Max. perm. rear axle load kg 6700 6700
Maximal vertical load on trailer coupling kg 2000 2000
Rear PTOs 540/540E/1000
PTO profile 1 3/8' 6-spline 1 3/8' 6-spline
PTO speed at rated engine speed and 540 setting rpm 587 587
PTO speed at rated engine speed and 540E setting rpm 762 762
PTO speed at rated engine speed and 1000 setting rpm 1103 1103
Max. permissible torque at 540 setting Nm 2200 2200
Max. permissible torque for 540E setting Nm 1650 1650
Max. permissible torque at 1000 setting Nm 1200 1200
Front PTO 1000 (540 optional)
PTO speed at rated speed, 1000 / 540 version rpm 1083/580 1083/580
Max. permissible torque Nm 749/1397 749/1397
Hydraulics
Working pressure bar 200 200
Hydraulic pump l/min 110 110
21. FENDT 700 Vario Tractor / General system
Technical specifications FENDT 700 Vario A
GeneralFENDT 700 from ../ 8001
20.06.2006 0000 000081Aa 2/4
Capitel Docu-No.IndexDate Version Page
Technical specifications FENDT 700 Vario
Available hydr. oil at max. capacity l 45 45
Rear power lift
Three-point Cat. 3/2 Cat.3/2
Control EPC EPC
Max. lifting power at drawbar kN 71.3 71.3
Front power lift (optional)
Three-point Cat. 2 Cat.2
Max. lifting power at coupling point kN 44.0 44.0
Implement weight up to approx. kg 3000 3000
Transmission
Vario continuously variable transmission km/h 50 50
Range I forwards km/h 0.02 - 28 0.02 - 28
Range I reverse km/h 0.02 - 16 0.02 - 16
Range II forwards km/h 0.02 - 50 0.02 - 50
Range II reverse km/h 0.02 - 37 0.02 - 37
Drive-in front loader
Lifting power
Size 3S/63 kN 18.9 18.9
Size 3S/70 kN 23.9 23.9
Break loose force
Size 3S/63 kN 24.9 24.9
Size 3S/70 kN 31.6 31.6
Lift height depending on tyres
Size 3S/63 mm 4035 4035
Size 3S/70 mm 4035 4035
Electrics
Operating voltage V 12 12
Battery V/Ah 12/170 12/170
Alternator W/V/A 1800/12/150 1800/12/150
Starter kW 3.1 3.1
Wheel tightening torques (threads and locating faces
lightly oiled)
Front wheels Nm 275 275
Rear wheels Nm 450 450
Rim screw connections of adjustable rims
Delachaux Nm 230 230
Südrad Nm 200 200
Grasdorf Nm 250 250
Model 711 712
22. FENDT 700 Vario Tractor / General system
Technical specifications FENDT 700 Vario A
GeneralFENDT 700 from ../ 8001
20.06.2006 0000 000081Aa 3/4
Capitel Docu-No.IndexDate Version Page
Technical specifications FENDT 700 Vario
Text-module
Model 714 716
Engine
Type of engine BF6M 2013-C BF6M 2013-C
Turbocharger / intercooler with / with with / with
No. of cylinders / cooling 6 / water 6 / water
Bore / stroke mm 98 /126 98 / 126
Effective displacement l 5.7 5.7
Idle speed rpm 780 ±30 780 ±30
Rated speed rpm 2100 2100
No-load engine speed rpm 2250 ±25 2250 ±25
Fuel l 340 340
Engine stop electrical electrical
Noise level at driver's ear dB(A) 72 72
Angle of engine
Tractor stability must be guaranteed
Lengthwise in travel direction front / rear degree 25 25
Across travel direction left / right degree 25 25
Weights and dimensions
At 50 km/h, with the following tyres and tracks
Tyres front 480/70R28 540/65R28
Tyres rear 580/70R38 650/65R38
Track width front mm 1940 1940
Track width rear mm 1920 1920
Overall length mm 4653 4653
Overall width mm 2555 2570
Overall height mm 2964 2964
Ground clearance mm 576 576
Wheelbase mm 2700 2700
Flange centre distance front mm 1892 1892
Flange centre distance rear mm 1780 1780
Min. turning circle radius without / with steering brake M 5.5/4.9 5.5/4.9
Kerb weight kg 6555 6555
Permissiblegrossweightwithspringaccumulatorhand
brake
kg 11500 11500
Permissible gross weight with mechanical hand brake kg 11000 11000
Permissible maximum front axle load kg 5000 4480
Max. perm. rear axle load kg 7500 7500
Maximal vertical load on trailer coupling kg 2000 2000
Rear PTOs 540/540E/1000
PTO profile 1 3/8' 6-spline 1 3/8' 6-spline
PTO speed at rated engine speed and 540 setting rpm 587 587
PTO speed at rated engine speed and 540E setting rpm 762 762
PTO speed at rated engine speed and 1000 setting rpm 1103 1103
Max. permissible torque at 540 setting Nm 2200 2200
Max. permissible torque for 540E setting Nm 1650 1650
Max. permissible torque at 1000 setting Nm 1200 1200
Front PTO 1000 (540 optional)
PTO speed at nominal speed, 1000 / 540 version rpm 1083/580 1083/580
Max. permissible torque Nm 811/1513 908/1695
Hydraulics
Working pressure bar 200 200
Hydraulic pump l/min 110 110
23. FENDT 700 Vario Tractor / General system
Technical specifications FENDT 700 Vario A
GeneralFENDT 700 from ../ 8001
20.06.2006 0000 000081Aa 4/4
Capitel Docu-No.IndexDate Version Page
Technical specifications FENDT 700 Vario
Available hydr. oil at max. capacity l 45 45
Rear power lift
Three-point Cat. 3/2 Cat.3/2
Control EPC EPC
Max. lifting power at drawbar kN 83.4 83.4
Front power lift (optional)
Three-point Cat. 2 Cat.2
Max. lifting power at coupling point kN 44.0 44.0
Implement weight up to approx. kg 3000 3000
Transmission
Vario continuously variable transmission km/h 50 50
Range I forwards km/h 0.02 - 28 0.02 - 28
Range I reverse km/h 0.02 - 16 0.02 - 16
Range II forwards km/h 0.02 - 50 0.02 - 50
Range II reverse km/h 0.02 - 37 0.02 - 37
Drive-in front loader
Lifting power
Size 3S/63 kN 18.9 18.9
Size 3S/70 kN 23.9 23.9
Break loose force
Size 3S/63 kN 24.9 24.9
Size 3S/70 kN 31.6 31.6
Lift height depending on tyres
Size 3S/63 mm 4063 4063
Size 3S/70 mm 4063 4063
Electrics
Operating voltage V 12 12
Battery V/Ah 12/170 12/170
Alternator W/V/A 1800/12/150 1800/12/150
Starter kW 3.1 3.1
Wheel tightening torques (threads and locating faces
lightly oiled)
Front wheels Nm 275 275
Rear wheels Nm 450 450
Rim screw connections of adjustable rims
Delachaux Nm 230 230
Südrad Nm 200 200
Grasdorf Nm 250 250
Model 714 716
24. FENDT 800 Vario Tractor / General system
Technical specifications FENDT 800 Vario A
General
20.06.2006 0000 000082Aa 1/2
Capitel Docu-No.IndexDate Version Page
Technical specifications FENDT 800 Vario
Text-module
Model 815 817 818
Engine
Type of engine BF6M 2013-C BF6M 2013-C BF6M 2013-C
Turbocharger / intercooler with / with with / with with / with
No. of cylinders / cooling 6 / water 6 / water 6 / water
Bore / stroke mm 98 /126 98 / 126 98 / 126
Effective displacement l 5.7 5.7 5.7
Idle speed rpm 800 +50 800 +50 800 +50
Rated speed rpm 2100 2100 2100
No-load engine speed rpm 2250 ±30 2250 ±30 2250 ±30
Fuel l 340 340 340
Engine stop electrical electrical electrical
Noise level at driver's ear dB(A) 72 72 72
Angle of engine
Tractor stability must be guaranteed
Lengthwise in travel direction front / rear degree 25 25 25
Across travel direction left / right degree 25 25 25
Weights and dimensions
At 50 km/h, with the following tyres and tracks
Tyres front 480/70R30 480/70R30 540/65R30
Tyres rear 580/70R42 580/70R42 650/65R42
Wheel track front mm 1940 1940 1940
Wheel track rear mm 1920 1920 1920
Overall length mm 4700 4700 4700
Overall width mm 2550 2550 2550
Overall height mm 3020 3020 3020
Kerb weight kg 6650 6650 6800
Ground clearance mm 570 570 570
Wheelbase mm 2720 2720 2720
Flange centre distance front mm 1892 1892 1892
Flange centre distance rear mm 1840 1840 1840
Hole circle diameter, front axle, rear axle mm 335 335 335
Minimum track circle radius with steering
clutch brake M 5.6 5.6 5.6
Max. permissible gross weight kg 12500 12500 12500
Max. permissible front axle load depending on
tyres kg 5000 5000 5400
Max. permissible rear axle load depending on
tyres
kg 8000 8000 8000
Maximal vertical load on trailer coupling kg 2000 2000 2000
Rear PTOs 540/540E/1000
PTO profile 1 3/8' 6-spline 1 3/8' 6-spline 1 3/8' 6-spline
PTO speed at rated engine speed and 540
setting rpm 587 587 587
PTO speed at rated engine speed and 540E
setting rpm 761 761 761
PTO speed at rated engine speed and 1000
setting rpm 1105 1105 1105
Max. permissible torque at 540 setting Nm 2200 2200 2200
Max. permissible torque for 540E setting Nm 1650 1650 1650
Max. permissible torque at 1000 setting Nm 1200 1200 1200
25. FENDT 800 Vario Tractor / General system
Technical specifications FENDT 800 Vario A
General
20.06.2006 0000 000082Aa 2/2
Capitel Docu-No.IndexDate Version Page
Technical specifications FENDT 800 Vario
Front PTO 1000 (540 optional)
PTO speed at rated engine speed and 1000
setting rpm 1083 1083 1083
PTO speed at rated engine speed and 540
setting (optional)
rpm 580 580 580
Max. permissible torque at 1000 setting Nm 908 908 908
Max. permissible torque for 540 setting
(optional)
Nm 1695 1695 1695
Hydraulics
Working pressure bar 200 200 200
Hydraulic pump l/min 110 110 110
Available hydr. oil at max. capacity l 45 45 45
Rear power lift
Three-point Cat. 2/3 Cat. 2/3 Cat. 2/3
Control EPC EPC EPC
Max. lift capacity kN 90.8 90.8 90.8
Front power lift (optional)
Three-point Cat. 2 Cat.2 Cat.2
Max. lift capacity kN 44.4 44.4 44.4
Implement weight up to approx. kg 3000 3000 3000
Transmission
Vario continuously variable transmission km/h 50 50 50
Range I forwards km/h 0.02 - 28 0.02 - 28 0.02 - 28
Range I reverse km/h 0.02 - 16 0.02 - 16 0.02 - 16
Range II forwards km/h 0.02 - 50 0.02 - 50 0.02 - 50
Range II reverse km/h 0.02 - 37 0.02 - 37 0.02 - 37
Drive-in front loader size 3S/70
Lifting power kN 23.9 23.9 23.9
Break loose force kN 31.6 31.6 31.6
Lift height depending on tyres mm 4057 4057 4057
Electrics
Operating voltage V 12 12 12
Battery V/Ah 12/170 12/170 12/170
Alternator W/V/A 1800/12/150 1800/12/150 1800/12/150
Starter kW 3.0 3.0 3.0
Wheel tightening torques
(threads and locating faces lightly oiled)
Front wheels Nm 450 450 450
Rear wheels Nm 580 580 580
Model 815 817 818
26. FENDT 700 Vario
FENDT 800 Vario
Tractor / General system
Fuels and lubricants A
GeneralFENDT 711 / 712 / 714 / 716 Vario and up .. / 8001
14.10.2003 0000 000049Aa 1/6
Capitel Docu-No.IndexDate Version Page
Fuels and lubricants
Text-module
Note:
Please obtain the values currently applicable from the operator's manual corresponding to the
chassis number.
Text-module
FENDT 711 - 716 Vario
Filling points Quantities Type 4) Intervals 2)
approx. l 1)
Engine 711 - 716 after 50, 500, 1000 operating
hours
Max. filling, with filter
change
16.5 Fendt Extra Grade 15W-40
SHPD, Fendt Ultra Grade 10W-40
UHPD or
then every 500 operating hours
SHPDengineoil3)toACEAE3-96 at least once a year for fuel with
up to 0.5 % sulphur content 5)
711 - 712
Fendt Super Grade 15W-40 or
Engineoil3)acc.toAPI-CDacc.to
ACEA E2-96 or E3-96
Transmission and
differential (refill)
45.0 Fendt Extra Trans 10W-40 or Every 2 years or every
2000 operating hours.
Power lift shaft
lubrication
0.2 STOU SAE 10 W-40 or 15 W-40 Power lift shaft lubrication (just
topping up) after 50 operating
hours or in event of a leak
Front PTO 3.5 after 500 operating hours, then
every two years or
2000 operating hours.
Axle drives each side Fendt Super Trans 80W-90,
85W-90 or
After 500 op. hrs.
711-712 7.0 Hypoid transmission oil then every 2 years
714-716 10.0 SAE 85W-90, SAE 80W-90, SAE
90 acc. to API GL-5.
or every 2000 op. hrs.
No STOU or other all-purpose oil.
Front axle Fendt Super Trans LS 85W-90 or
hypoid transmission oil with LS
additives
After 50 and 1000 operating
hours
Differential 6.0 SAE 85W-90, SAE 80W-90, SAE
90 acc. to API GL-5.
then every 2 years or every
1000 op. hrs.
Hub drives each side 0.8 No STOU or other all-purpose oil.
Hydraulics FendtSuperHyd,FendtExtraHyd
68 or
after 1,000 operating hours,
then every 2 years
Quantity for max.
filling
50.0 STOU SAE 5W-30, 5W-40,
10W-30, 10W-40,
15W-30,15W-40
or every 1,000 operating hours
or engine oil HD-SAE 5W-30,
5W-40, 10W-30, 10W-40,
15W-30,15W-40 to API-CD.
At temperatures over 10°C, also
perm.: HD-SAE 20 W-20 acc. to
API-CD
Fuel tank Diesel 5) Fill up after use
711-712 300.0
714-716 340.0
Cooling system 18.0 Water with 35 - 50 vol. % anti-
freeze and corrosion protection 6)
Change antifreeze every 2 years
27. FENDT 700 Vario
FENDT 800 Vario
Tractor / General system
Fuels and lubricants A
GeneralFENDT 711 / 712 / 714 / 716 Vario and up .. / 8001
14.10.2003 0000 000049Aa 2/6
Capitel Docu-No.IndexDate Version Page
Fuels and lubricants
Brake and clutch
system
0.8 Pentosin CHF 11S
(X 902.011.622)
Every 2 years
Air compressor 0.5 Ethyl alcohol antifreeze Fill up only below +5 °C
(X 902.015.003)
Lubrication points Fendt Ultra Fett Li, Fendt Extra
Fett EP or
See Lubrication Chart
Lithium-saponified grease, NLGI
class 2
(worked penetration coefficient
265-295)
- regularly oil all other joints and
bearing surfaces
FENDT 800 Vario
Filling points Quantities Type 4) Intervals 2)
approx. l 1)
Engine Fendt Extra Grade 15W-40 SHPD,
Fendt Ultra Grade 10W-40 UHPD
or
after 50, 500, 1000 operating
hours
Max. filling, with filter
change
16.5 SHPD engine oil 3) to ACEA E3-96 then every 500 operating
hours at least once a year for
fuel with up to 0.5 % sulphur
content 5)
Transmission and
differential (refill)
50.0 Fendt Extra Trans 10W-40 or Every 2 years or every
2000 operating hours.
Power lift shaft
lubrication
0.2 STOU SAE 10 W-40 or 15 W-40 Power lift shaft lubrication (just
topping up) after 50 operating
hours or in event of a leak
Front PTO 3.5 after500operatinghours,then
every two years or
2000 operating hours.
Axle drives each side Fendt Super Trans 80W-90,
85W-90 or
After 500 op. hrs.
Hypoid transmission oil then every 2 years
13.0 SAE 85W-90, SAE 80W-90, SAE
90 acc. to API GL-5.
or every 2000 op. hrs.
No STOU or other all-purpose oil.
Front axle Fendt Super Trans LS 85W-90 After 50 and 1000 operating
hours
or hypoid transmission oil with LS
additives.
then every 2 years
Differential 8.5 SAE 85 W-90, SAE 80 W-90, SAE
90 acc. to API GL-5.
or every 1,000 operating hours
Hub drives each side 2.1 No STOU or other all-purpose oil.
Hydraulics Fendt Super Hyd, Fendt Extra Hyd
68 or
after 1,000 operating hours,
then every 2 years
Quantity for max. filling 50.0 STOU SAE 5W-30, 5W-40,
10W-30, 10W-40, 15W-30,15W-40
or every 1,000 operating hours
or engine oil HD-SAE 5W-30,
5W-40, 10W-30, 10W-40,
15W-30,15W-40 to API-CD.
At temperatures over 10°C, also
perm.: HD-SAE 20 W-20 acc. to
API-CD
FENDT 711 - 716 Vario (Forts.)
Filling points Quantities Type 4) Intervals 2)
28. FENDT 700 Vario
FENDT 800 Vario
Tractor / General system
Fuels and lubricants A
GeneralFENDT 711 / 712 / 714 / 716 Vario and up .. / 8001
14.10.2003 0000 000049Aa 3/6
Capitel Docu-No.IndexDate Version Page
Fuels and lubricants
PM-Picturemodule
Fuel tank 340.0 Diesel 5) Fill up after use
Cooling system 20.0 Waterwith35-50vol.%anti-freeze
and corrosion protection 6)
Change antifreeze every
2 years
Brake and clutch
system
0.8 Pentosin CHF 11S (X 902.011.622) Every 2 years
Air compressor 0.5 Ethyl alcohol antifreeze Fill up only below +5 °C
(X 902.015.003)
Lubrication points Fendt Ultra Fett Li,
Fendt Extra Fett EP or
See Lubrication Chart
Lithium-saponified grease,
NLGI class 2
(worked penetration coefficient
265-295)
- regularly oil all other joints
and bearing surfaces
3) VISCOSITY OF OILS IN ENGINE
Monograde oils Multigrade oils
PMTAB_Picture
1) As indicated on dipstick, by overflow from filling
point etc.
2) Whichever is the sooner.
4) For permitted tradenames, if specified, see
current fuels and lubricants list which all Fendt
dealers receive as a service circular.
5) If diesel fuel contains more than 0.5 - 1%
sulphur, oil-change intervals must be halved.
A sulphur content of less than 0.05% is
recommended, though the fuel supplier must
confirm that an adequate lubricant effect is
guaranteed (e.g. by means of additives). Only use
alternative fuels, e.g. RME, if approved by the
Service Workshop.
FENDT 800 Vario (Forts.)
Filling points Quantities Type 4) Intervals 2)
29. FENDT 700 Vario
FENDT 800 Vario
Tractor / General system
Fuels and lubricants A
GeneralFENDT 711 / 712 / 714 / 716 Vario and up .. / 8001
14.10.2003 0000 000049Aa 4/6
Capitel Docu-No.IndexDate Version Page
Fuels and lubricants
Text-module
Text-module
1) = Lithium-saponified, dripping point approx. 185°C, worked penetration coefficient 265 to 295
(soft)
2) = Alvania 2 or Renolit MP
3) = Components which are to be bonded must be free of paint, oil and grease. Dry bonding
surfaces should both be moistened with artificial bonding agent; after joining with an airtight
seal, leave for the required hardening time.
Lubricants, sealants and bonding agents
High-pressure grease for long-term lubrication, e.g. for
splined shaft profiles
X 902.002.472 long-life grease
Grease for lubricating sealing lips of shaft seals Multi-purpose grease 1) and 2)
Sealant (fully hardening) for shaft seals with steel cage Serdon X 903.051.711
Shaft seals with rubberised outer ring
Coat outer rings with Spirit/water mixture 1:1
Sealant (not fully curing) for surfaces of gearbox housing Loctite X 903.050.074
Sealant e.g. for Hall-effect sensors with rotational direction
sensor (non-curing)
F 119.200.210.930
Synthetic bonding agent Normal Loctite bolt-sealant
X 903.050.084 3)
Synthetic bonding agent Loctite high-strength X 903.050.091 3)
High-speed cleaner for use against grease and oil, 520 ml
spray can
X 907.505.000
30. Thank you very much
for your reading.
Please Click Here
Then Get More
Information.