ICR SPRINT SC9 CREAMY YELLOW PUTTY - Stucco per lamiere zincate ed alluminio ...
Express Air System Energy Saver brochure - Italian/English edition
1.
2. La linea Express Air System - ENERGY SAVER di ICR è stata pensata come soluzione alle attuali necessità
della carrozzeria di effettuare lavorazioni rapide, di qualità e orientate all’ottimizzazione dei costi. Questo
innovativo ciclo consente di ridurre drasticamente i tempi di essiccazione sia nella lavorazione ad aria che in
cabina, con un notevole risparmio di costi energetici di utilizzo del forno di essiccazione, ottenendo risultati di
eccellente qualità della finitura. La linea è studiata sia per lavorazioni estese che per lavorazioni parziali e ritocchi.
The Express Air System - ENERGY SAVER product range from ICR is designed to meet the needs of bodyshops
for fast, high-quality and cost-effective repairs. This innovative cycle enables to drastically reduce drying times (both
air drying and stove drying) thus allowing a considerable energy saving in terms of stove use. At the same time,
excellent finishing results are guaranteed.This product line is ideal for both spot or whole car repairs.
Con Express Air System
vengono pressochè azzerati i costi
energetici con un risparmio del 70%
dei tempi di essiccazione sia
ad aria che in cabina
With Express Air System energy
costs are nearly zeroed: air-drying
and stove-drying times
are reduced by 70%
-70%
LEGENDA
TRADIZIONALE EXPRESS AIR SYSTEM
GUARDA I VIDEO TUTORIAL
DI APPLICAZIONE
WATCH THE TUTORIAL
VIDEOS
3. H79 SPRINT-AIR WIDE.
TRASPARENTE ACRILICO
UHS ULTRA RAPIDO.
Trasparente acrilico bicomponente UHS ultra rapido
ideale come finitura di pregio nei cicli a doppio strato
ad acqua o a solvente.
Adatto per tutte le riparazioni (ritocco e verniciature
complete) ove siano richiesti tempi di essiccazione
particolarmente ridotti.
Pienezza e brillantezza superiori ai trasparenti di pari
categoria, catalisi 2:1, pronto all’uso e di facilissimo
impiego.
Il VOC di questo prodotto pronto uso è inferiore
ai 420 g/l.
H79 SPRINT-AIR WIDE.
ACRYLIC CLEARCOAT
UHS FAST.
2K Acrylic clearcoat UHS (Ultra High Solid),
excellent for high quality finishes, in double coating
cycles (water or solvent-based).
Ideal for all kind of reparations (spot or whole car
repair), where very fast drying times are required.
High gloss and very good depth are at higher level
compared to the clearcoats of the same category.
Mix with 2:1 hardener. Ready and easy to use.
The EU VOC limit for this ready-to-use product
is 420 g/l.
express air system | ENERGY SAVER
FUORI POLVERE
5’-10’ a 23°C
DRY DUST FREE
5’-10’ at 23°C
ESSICCAZIONE COMPLETA
Lucidabile dopo
3h a 23°C
5’-10’ a 60°C
COMPLETELY DRY
Polish after
3h at 23°C
5’-10’ at 60°C
4. H59 SPRINT-AIR GT CLEAR HS.
TRASPARENTE ACRILICO
2K ULTRA FAST HS.
Trasparente acrilico Bicomponente HS tipo”Air”,
a lungo pot life.
Finitura “Air” che permette elevata produttività
e ottimizzazione dei tempi di indurimento grazie
alla veloce essiccazione all’aria.
Facile e scorrevole nell’applicazione, permette
di realizzare finiture piene, ad elevata brillantezza
e particolarmente dure e resistenti al graffio.
Per ritocchi e verniciature complete.
Trasparente Antiscratch e quindi classificato come
“Finitura Speciale” con VOC = 560 g/l, conforme
al limite di categoria imposto dalla CE 2004/42.
H59 SPRINT-AIR GT CLEAR HS.
2K ACRYLIC CLEARCOAT
HS “AIR”.
2K Acrylic Hs “Air “with a long pot life.
“Air” finishes that allow high productivity and
optimization of hardening times thanks to fast air drying.
Easy to use finish, H59 gives high glossy finishes
with high scratch resistant.
Suitable for spot repair and complete painting.
Product rated as a “Special Topcoat” with
VOC = 560 g/l, compliant with the limit for
the category set by EC 2004/42.
FUORI POLVERE
10’-15’ a 23°C
DRY DUST FREE
10’-15’ at 23°C
ESSICCAZIONE COMPLETA
Lucidabile dopo
2h 30’ a 23°C
10’ a 60°C
COMPLETELY DRY
Polish after
2h 30’ at 23°C
10’ at 60°C
5. H72 SPRINT-AIR.
TRASPARENTE 2K AD ARIA
ULTRA RAPIDO.
Trasparente bicomponente ultra fast, ideale
per piccole riparazioni ove siano richiesti tempi
di indurimento particolarmente ridotti.
Finitura di pregio, nei cicli a doppio strato, con
basi opache ad acqua o solvente.
Il VOC di questo prodotto pronto uso è inferiore
ai 340 g/l.
H72 SPRINT-AIR.
ULTRA-FAST AIR-DRIED 2K
CLEARCOAT.
Ultra Fast two-component clearcoat, ideal for small
repairs when the product must harden within a very
short time.
For high quality finishes, in double layer cycles
where water or solvent-based mat basecoats are used.
The EU VOC limit for this ready-to-use product
is 340 g/l.
FUORI POLVERE
15’ a 23°C
DRY DUST FREE
15’ at 23°C
ESSICCAZIONE COMPLETA
Lucidabile dopo
50-70’ a 23°C
COMPLETELY DRY
Polish after
50-70’ at 23°C
SPOT
REPAIR
6. express air system | ENERGY SAVER
SPRINT-AIR PRIMER.
FONDO ACRILICO 2K HS
ULTRA RAPIDO.
Fondo acrilico a due componenti alto solido con
eccezionale rapidità di essiccazione. Adatto per tutte
le riparazioni.
Di elevato spessore, non assorbe e consente finiture
uniformi e brillanti. È di facile carteggiatura
(grana 500 a secco) e sovraverniciabile con qualsiasi
tipo di smalto. Il VOC di questo prodotto pronto uso è
inferiore ai 540 g/l.
Carteggiabile dopo 50 minuti a 20°,
spessore 200/250 micron.
Colorazioni:
F76 bianco /F77 grigio/ F78 grigio scuro/ F79 nero
SPRINT-AIR PRIMER.
2K HS ACRYLIC PRIMER
ULTRA FAST.
2K HS (High Solid) Acrylic primer with exceptional
fast drying times. Ideal for all kinds of repairs.
It allows application on several layers, it is not
absorbing and gives the finish an even and high gloss.
It can be easily sanded (500 grit dry) and it can be
overpainted with any kind of finish. The EU VOC limit
for this ready-to-use product is 540 g/l.
Sand after 50 minutes at 20°,
thickness 200/250 microns.
Available colors:
F76 white /F77 grey /F78 dark grey /F79 black
FUORI POLVERE
10’ a 20°C
DRY DUST FREE
10’ at 20°C
ESSICCAZIONE COMPLETA
Carteggiabile dopo
50’ a 20°C
5’-10’ a 60°C
COMPLETELY DRY
Sand after
50’ at 20°C
5’-10’ at 60°C
7. TABELLA COMPARATIVA LAVORAZIONE AD ARIA 20°C
COMPARATIVE TABLE: AIR-DRYING AT 20°C
TABELLA COMPARATIVA LAVORAZIONE CABINA 60°C
COMPARATIVE TABLE: STOVE-DRYING AT 60°C
Tempi di essiccazione Express Air System RIPARAZIONE
ESTESA / Air-drying times with Express Air System
products WHOLE CAR REPAIR
Tempi CICLO CONVENZIONALE / USUAL CYCLE timing
Tempi CICLO CONVENZIONALE / USUAL CYCLE timing
Tempi di essiccazione Express Air System SPOT REPAIR
Air-drying times with Express Air System
products SPOT REPAIR
1
240’
1
30’
1
1
2
2
3
3
740’
250’
130’
2
20’
2
20’
3
480’
3
40’
50’
50’
180’
60’
20’
20’
LAVORAZIONEADARIA20°C
AIR-DRYINGAT20°C
LAVORAZIONECABINA60°C
STOVE-DRYINGAT60°C
LEGENDA: 1 - Fondo / Primer • 2 - Base Opaca / Basecoat • 3 - Trasparente / Clearcoat
Tempi di essiccazione Express Air System RIPARAZIONE
ESTESA / Stove-drying times with Express Air System
products WHOLE CAR REPAIR
90’
35’
1 2 3
5’ 20’ 10’
8. I.C.R. S.p.A.
ITALIA - Reggio Emilia
Tel. + 39/0522.517803 – Fax + 39/0522.514384
E-mail: info@icrsprint.it – www.icrsprint.com
ICR Ibérica, S.A.
SPAIN - Tel. +34/901 101 408
E-mail: info@icriberica.com
www.icriberica.com
ICR SPRINT INC
USA - Fall River - MA - T: 800 980 4071
E-mail: icrsprintusa@gmail.com
www.icrsprint.com
ICR SPRINT COATING UK LTD
UK - London - T: 01278802011
E-mail: enquiries@icrsprint.co.uk
www.icrsprint.com
EDIZIONE1.2019