EXPERIMENT.docx
•Download as DOCX, PDF•
0 likes•6 views
The document describes an experiment to test how different paper airplane designs affect flight speed. Three designs - Harrier, Martin, and Galaxy Fighter - were tested by measuring the time and distance of each plane's flight over three trials. The Martin design traveled the farthest distance and fastest speed on average, while the Galaxy Fighter design was the slowest. The experiment had one independent variable (paper airplane design), one dependent variable (flight speed), and controlled for paper type, weather conditions, and launch force.
Report
Share
Report
Share
Recommended
Pendulum investigation 1
This document outlines three experiments to investigate how different variables affect the period of a pendulum. The variables to be tested are pendulum length, mass, and pullback angle. Students will use an online pendulum simulation to collect period time data for different values of the variable being tested. They will then graph the variable versus period and analyze the results. The goal is for students to understand how length, mass, and pullback angle each impact a pendulum's swing time or period.
Masters project atmoshperic turbulence
This document outlines a master's project to study atmospheric turbulence in a wind tunnel. The student aims to generate a working experiment model to study the effects of atmospheric turbulence. The initial experiment setup failed to achieve the desired boundary layer. Modifications were made including extending the length of turbulence fins and adding more surface roughness elements downstream. The final setup included 4 turbulence fins and 8 surface roughness elements. Preliminary results showed promise for generating the desired velocity profile at 5 m/s wind speed, but further work is needed to fully validate the results against turbulence models. The project provides a valuable learning experience for the student in applying classroom knowledge to solve a real-world problem.
Engineering Portfolio
Joshua Grosserhode's engineering portfolio document contains summaries of several projects he worked on as an undergraduate student at Oregon State University studying mechanical engineering. The projects included designing an autonomously guided glider payload that was ejected from a 30,000 foot sounding rocket, building a paper launcher for a competition to launch paper balls into a target, and participating twice in a 30 hour engineering challenge where he helped build a remote control car and an automated sidewalk chalk marker. The document provides details on his responsibilities and contributions to each project.
Fs3510121016
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Designing-Drones.pptx.pdf
1) The lesson plan provides materials and instructions for students to work in teams to design and build rotors that fall as slowly as possible from a height of 10 feet.
2) Teams are given various materials like paper, cardboard, foam and templates to build their rotors within the criteria of using only supplied materials.
3) Teams will test their rotors by dropping them from 10 feet and recording the time taken to reach the floor, with the slowest time of 3 drops used for comparison. Teams then reflect on their designs and the engineering process.
Paper Airplanes Test
1) The authors built a paper airplane launcher to test which paper airplane design would fly the farthest with consistent launch conditions.
2) They tested 7 different paper airplane designs, including the Moth, Dart, Arrow, Kite, and Champ.
3) Contrary to their hypothesis that the Moth would win, the Dart flew the farthest average distance of 649.3 centimeters based on 3 launches with the custom launcher.
FYP Report - Eoin Lees
The document describes the development of a condition monitoring tool to monitor composite wind turbine blades. It outlines the design process undertaken which included defining design specifications, generating concepts, selecting a final concept, and developing prototypes. The initial design used magnetic wheels but was changed to a rail-dependent design with legs contacting the ground. Further development is needed to add onboard computing and complete the design. Testing of prototypes helped refine the design and develop software to track the nacelle's movement.
Motionand design
This document outlines a multi-day unit plan on motion and design. On day 1, students create a chart on motion, design, and force and complete a scavenger hunt. They explore with K'NEX pieces and learn Newton's First Law of Motion. Subsequent days cover Newton's Second and Third Laws, designing and drawing vehicles, exploring force and gravity, testing vehicles carrying loads, evaluating design, and investigating friction. Students build propeller-driven vehicles, discuss cost considerations, and participate in a design challenge to apply their learning. The unit incorporates hands-on activities, group work, and homework to teach key concepts in physics and engineering design.
Recommended
Pendulum investigation 1
This document outlines three experiments to investigate how different variables affect the period of a pendulum. The variables to be tested are pendulum length, mass, and pullback angle. Students will use an online pendulum simulation to collect period time data for different values of the variable being tested. They will then graph the variable versus period and analyze the results. The goal is for students to understand how length, mass, and pullback angle each impact a pendulum's swing time or period.
Masters project atmoshperic turbulence
This document outlines a master's project to study atmospheric turbulence in a wind tunnel. The student aims to generate a working experiment model to study the effects of atmospheric turbulence. The initial experiment setup failed to achieve the desired boundary layer. Modifications were made including extending the length of turbulence fins and adding more surface roughness elements downstream. The final setup included 4 turbulence fins and 8 surface roughness elements. Preliminary results showed promise for generating the desired velocity profile at 5 m/s wind speed, but further work is needed to fully validate the results against turbulence models. The project provides a valuable learning experience for the student in applying classroom knowledge to solve a real-world problem.
Engineering Portfolio
Joshua Grosserhode's engineering portfolio document contains summaries of several projects he worked on as an undergraduate student at Oregon State University studying mechanical engineering. The projects included designing an autonomously guided glider payload that was ejected from a 30,000 foot sounding rocket, building a paper launcher for a competition to launch paper balls into a target, and participating twice in a 30 hour engineering challenge where he helped build a remote control car and an automated sidewalk chalk marker. The document provides details on his responsibilities and contributions to each project.
Fs3510121016
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Designing-Drones.pptx.pdf
1) The lesson plan provides materials and instructions for students to work in teams to design and build rotors that fall as slowly as possible from a height of 10 feet.
2) Teams are given various materials like paper, cardboard, foam and templates to build their rotors within the criteria of using only supplied materials.
3) Teams will test their rotors by dropping them from 10 feet and recording the time taken to reach the floor, with the slowest time of 3 drops used for comparison. Teams then reflect on their designs and the engineering process.
Paper Airplanes Test
1) The authors built a paper airplane launcher to test which paper airplane design would fly the farthest with consistent launch conditions.
2) They tested 7 different paper airplane designs, including the Moth, Dart, Arrow, Kite, and Champ.
3) Contrary to their hypothesis that the Moth would win, the Dart flew the farthest average distance of 649.3 centimeters based on 3 launches with the custom launcher.
FYP Report - Eoin Lees
The document describes the development of a condition monitoring tool to monitor composite wind turbine blades. It outlines the design process undertaken which included defining design specifications, generating concepts, selecting a final concept, and developing prototypes. The initial design used magnetic wheels but was changed to a rail-dependent design with legs contacting the ground. Further development is needed to add onboard computing and complete the design. Testing of prototypes helped refine the design and develop software to track the nacelle's movement.
Motionand design
This document outlines a multi-day unit plan on motion and design. On day 1, students create a chart on motion, design, and force and complete a scavenger hunt. They explore with K'NEX pieces and learn Newton's First Law of Motion. Subsequent days cover Newton's Second and Third Laws, designing and drawing vehicles, exploring force and gravity, testing vehicles carrying loads, evaluating design, and investigating friction. Students build propeller-driven vehicles, discuss cost considerations, and participate in a design challenge to apply their learning. The unit incorporates hands-on activities, group work, and homework to teach key concepts in physics and engineering design.
Paper airplane Project I.S.F.E
This document provides instructions for an engineering project where student teams must design and build two paper airplanes - one to fly as far as possible and one to stay in the air as long. The document outlines requirements, materials, forces that impact flight, design considerations for each plane type, and potential modifications to improve flight performance. The goal is for students to work as a team, apply engineering concepts, and design paper airplanes to optimize for distance or time in the air.
AS3/ Expt-g/ Angelene
This experiment aims to measure the acceleration due to gravity, g, by investigating the free fall motion of steel balls with air resistance. The time taken for a ball to fall between two points a known distance apart is measured using a ticker timer. By plotting distance against time squared on a graph, the gradient gives the value of g. Sources of error include the ticker timer ticking at fixed intervals, air resistance, human error in measurement and ensuring the balls are dropped from the same height.
Airplane presentation copy
Members: Luke Fickenworth, Samuel Gravois, Tony Tufano designed paper airplanes to fly the farthest distance and stay in the air the longest time. They considered factors like drag, thrust, lift, and weight distribution. Prototypes included designs with large wings for time in air versus compact designs for distance. Test flights showed the distance plane flew 86 feet 11 inches while the time plane stayed aloft 3.2 seconds, ranking first and third in class, respectively.
Ft3510171021
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
wind tunnel 2057164.pptx
This document provides information about wind tunnels. It begins with an introduction that defines a wind tunnel as an aerodynamic device used to test how air flows around objects. It then discusses the history and present use of wind tunnels. The working principle, classifications, components, advantages, disadvantages, and calculations involved in wind tunnels are described. Conclusions state that wind tunnel results may differ from real-world conditions due to boundary layer effects. References are provided at the end.
Research Paper
The document describes the design, construction, and programming of an octocopter drone intended to scan and model buildings in 3D. An octocopter frame was built using metal and 3D printed parts with eight motors, batteries, and an autopilot system. Software was programmed to take photos from the drone's camera during flight and stitch them together into a 3D model. Testing progressed from tethered indoor flights to autonomous outdoor flights following programmed paths. The final successful result was a functioning octocopter capable of automated building scans and 3D modeling.
Estimated time comic=5 min. stem explanation=10 m
This document provides instructions for a STEM project involving building and testing PVC pipe mini-marshmallow shooters. It estimates the time needed for different parts of the project. The objective is for students to learn about laws of motion, energy transfer, and engineering design through building their own shooter. Materials and instructions are provided, along with assessment questions to test student understanding of the science concepts. National standards in science, engineering, and math are also listed that the project addresses.
ME 436 Final Project
This document summarizes the composite layup process for a scaled-down model of a fairing design for California State University, Northridge's 2016-2017 Human Powered Vehicle. It describes using SolidWorks to design the fairing and mold, then performing a wet layup with fiberglass and epoxy resin. The layup involved cleaning the mold, applying release agents, laying fiberglass sheets with resin, using breather fabric and vacuum bagging to apply pressure, and allowing it to cure for 24 hours. The final product was a scaled model of the proposed fairing design to gain experience with composite manufacturing processes.
Airplane Simulation Analysis Anno 2014/2015
Questo progetto è stato svolto per il corso di Sustainable operation management. L'obiettivo era quello di riorganizzare la supply chain di un'impresa (fittizia) produttrice di aeroplani, per migliorare:
- Tempo impiegato per le opertions svolte internamente
- Redditività
- Produttività
- Impatto ambientale
La didattica di tale corso è stata seguita nella sua modalità in lingua inglese. Progetto svolto nel mio percorso in triennale.
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
NIPER JEE PYQ
NIPER JEE QUESTIONS
MOST FREQUENTLY ASK QUESTIONS
NIPER MEMORY BASED QUWSTIONS
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...Nguyen Thanh Tu Collection
https://app.box.com/s/qspvswamcohjtbvbbhjad04lg65waylfBÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneLevel 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
Temple of Asclepius in Thrace. Excavation results
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Andreas Schleicher, Director of Education and Skills at the OECD presents at the launch of PISA 2022 Volume III - Creative Minds, Creative Schools on 18 June 2024.
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Whether you're new to SEO or looking to refine your existing strategies, this webinar will provide you with actionable insights and practical tips to elevate your nonprofit's online presence.
How to Manage Reception Report in Odoo 17
A business may deal with both sales and purchases occasionally. They buy things from vendors and then sell them to their customers. Such dealings can be confusing at times. Because multiple clients may inquire about the same product at the same time, after purchasing those products, customers must be assigned to them. Odoo has a tool called Reception Report that can be used to complete this assignment. By enabling this, a reception report comes automatically after confirming a receipt, from which we can assign products to orders.
More Related Content
Similar to EXPERIMENT.docx
Paper airplane Project I.S.F.E
This document provides instructions for an engineering project where student teams must design and build two paper airplanes - one to fly as far as possible and one to stay in the air as long. The document outlines requirements, materials, forces that impact flight, design considerations for each plane type, and potential modifications to improve flight performance. The goal is for students to work as a team, apply engineering concepts, and design paper airplanes to optimize for distance or time in the air.
AS3/ Expt-g/ Angelene
This experiment aims to measure the acceleration due to gravity, g, by investigating the free fall motion of steel balls with air resistance. The time taken for a ball to fall between two points a known distance apart is measured using a ticker timer. By plotting distance against time squared on a graph, the gradient gives the value of g. Sources of error include the ticker timer ticking at fixed intervals, air resistance, human error in measurement and ensuring the balls are dropped from the same height.
Airplane presentation copy
Members: Luke Fickenworth, Samuel Gravois, Tony Tufano designed paper airplanes to fly the farthest distance and stay in the air the longest time. They considered factors like drag, thrust, lift, and weight distribution. Prototypes included designs with large wings for time in air versus compact designs for distance. Test flights showed the distance plane flew 86 feet 11 inches while the time plane stayed aloft 3.2 seconds, ranking first and third in class, respectively.
Ft3510171021
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
wind tunnel 2057164.pptx
This document provides information about wind tunnels. It begins with an introduction that defines a wind tunnel as an aerodynamic device used to test how air flows around objects. It then discusses the history and present use of wind tunnels. The working principle, classifications, components, advantages, disadvantages, and calculations involved in wind tunnels are described. Conclusions state that wind tunnel results may differ from real-world conditions due to boundary layer effects. References are provided at the end.
Research Paper
The document describes the design, construction, and programming of an octocopter drone intended to scan and model buildings in 3D. An octocopter frame was built using metal and 3D printed parts with eight motors, batteries, and an autopilot system. Software was programmed to take photos from the drone's camera during flight and stitch them together into a 3D model. Testing progressed from tethered indoor flights to autonomous outdoor flights following programmed paths. The final successful result was a functioning octocopter capable of automated building scans and 3D modeling.
Estimated time comic=5 min. stem explanation=10 m
This document provides instructions for a STEM project involving building and testing PVC pipe mini-marshmallow shooters. It estimates the time needed for different parts of the project. The objective is for students to learn about laws of motion, energy transfer, and engineering design through building their own shooter. Materials and instructions are provided, along with assessment questions to test student understanding of the science concepts. National standards in science, engineering, and math are also listed that the project addresses.
ME 436 Final Project
This document summarizes the composite layup process for a scaled-down model of a fairing design for California State University, Northridge's 2016-2017 Human Powered Vehicle. It describes using SolidWorks to design the fairing and mold, then performing a wet layup with fiberglass and epoxy resin. The layup involved cleaning the mold, applying release agents, laying fiberglass sheets with resin, using breather fabric and vacuum bagging to apply pressure, and allowing it to cure for 24 hours. The final product was a scaled model of the proposed fairing design to gain experience with composite manufacturing processes.
Airplane Simulation Analysis Anno 2014/2015
Questo progetto è stato svolto per il corso di Sustainable operation management. L'obiettivo era quello di riorganizzare la supply chain di un'impresa (fittizia) produttrice di aeroplani, per migliorare:
- Tempo impiegato per le opertions svolte internamente
- Redditività
- Produttività
- Impatto ambientale
La didattica di tale corso è stata seguita nella sua modalità in lingua inglese. Progetto svolto nel mio percorso in triennale.
Similar to EXPERIMENT.docx (9)
Recently uploaded
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
NIPER JEE PYQ
NIPER JEE QUESTIONS
MOST FREQUENTLY ASK QUESTIONS
NIPER MEMORY BASED QUWSTIONS
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...Nguyen Thanh Tu Collection
https://app.box.com/s/qspvswamcohjtbvbbhjad04lg65waylfBÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneLevel 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
Temple of Asclepius in Thrace. Excavation results
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Andreas Schleicher, Director of Education and Skills at the OECD presents at the launch of PISA 2022 Volume III - Creative Minds, Creative Schools on 18 June 2024.
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Whether you're new to SEO or looking to refine your existing strategies, this webinar will provide you with actionable insights and practical tips to elevate your nonprofit's online presence.
How to Manage Reception Report in Odoo 17
A business may deal with both sales and purchases occasionally. They buy things from vendors and then sell them to their customers. Such dealings can be confusing at times. Because multiple clients may inquire about the same product at the same time, after purchasing those products, customers must be assigned to them. Odoo has a tool called Reception Report that can be used to complete this assignment. By enabling this, a reception report comes automatically after confirming a receipt, from which we can assign products to orders.
A Free 200-Page eBook ~ Brain and Mind Exercise.pptx
(A Free eBook comprising 3 Sets of Presentation of a selection of Puzzles, Brain Teasers and Thinking Problems to exercise both the mind and the Right and Left Brain. To help keep the mind and brain fit and healthy. Good for both the young and old alike.
Answers are given for all the puzzles and problems.)
With Metta,
Bro. Oh Teik Bin 🙏🤓🤔🥰
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
Slides from a Capitol Technology University webinar held June 20, 2024. The webinar featured Dr. Donovan Wright, presenting on the Department of Defense Digital Transformation.
How to Predict Vendor Bill Product in Odoo 17
This slide will guide us through the process of predicting vendor bill products based on previous purchases from the vendor in Odoo 17.
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
Recently uploaded (20)
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
SWOT analysis in the project Keeping the Memory @live.pptx
SWOT analysis in the project Keeping the Memory @live.pptx
A Free 200-Page eBook ~ Brain and Mind Exercise.pptx
A Free 200-Page eBook ~ Brain and Mind Exercise.pptx
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
EXPERIMENT.docx
- 1. I. Problem: How does changing the design of making a paper airplane affect the speed of it? II. Hypothesis: If we use different design in making a paper airplane, then it can affect the speed of it. Experimental Design III. Experimental Group: Different design of a paper plane Control Group: Normal design of paper airplane. Independent Variable: Different design of a paper airplane. Dependent Variable: Speed it traveled Control Variable: Type of paper, weather, force applied to the plane. IV. Materials: 3pcs. of bond paper (short) Stopwatch Scissors Ruler Pencil Pull, push and roll V. Procedure: First ready all the materials needed in this experiment. After that, start folding the first bond paper to the “Harrier de Sign”. Fold the second to the “Martin design”. And fold the last bond paper to the “Galaxy Fighter Design”. After folding/making 3 design, start the experiment. Throw the first design of paper airplane which is the “Harrier Design” with normal force applied to it. Measure it’s distance and time using a Stopwatch and a Pull, Push and Roll then calculate the speed of the airplane using the time and distance that
- 2. you’ve gathered. Repeat the process on the “Martin and Galaxy Fighter Design”. Record all the data that you’ve gathered on the table below. Date that I gather/collect: Design of paper airplane Time Elapsed by the plane Distance traveled Speed of the airplane 1st 2nd 3rd 1st 2nd 3rd 1st 2nd 3rd Martin 1.38 1.35 1.48 200 cm 222 cm 350 cm 144.92 cm/s 164.49 cm/s 236.48 cm/s Harrier 1.59 1.60 1.62 250 cm 268 cm 272 cm 162.33 cm/s 167.5 cm/s 167.90 cm/s Galaxy Fighter 2.05 2.08 2.13 311 cm 315 cm 327 cm 151.70 cm/s 151.49 cm/s 153.52 cm/s