Et0044 fabrication of automatic lubricating system
•Download as DOC, PDF•
0 likes•35 views
This document describes a project to automatically circulate coolant in a lathe cutting tool based on temperature readings from a sensor. When the temperature increases past a threshold, a pump will start supplying coolant to the lathe from a tank. The circulation system is monitored by a control system, and the pump will shut off when the temperature decreases. The goal is to maintain a constant temperature in the tool, avoid coolant wastage, and allow automatic pump operation. Potential disadvantages include difficulty maintaining a closed-loop system.
Report
Share
Report
Share
Recommended
Coolant for lathe
ECWAY TECHNOLOGIES
IEEE PROJECTS,HARDWARE & SOFTWARE DEVELOPMENTS
OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
BANGALORE / HYDRABAD
CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111
Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com
VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com
Et0049 fabrication of dual ram shaper to reducing lead time and increasing ...
This document describes a project to fabricate a dual ram shaper to reduce lead time and increase material removal rate compared to a normal shaper. A normal shaper uses a single ram, whereas the dual ram shaper uses two rams operated by a single motor, with one ram moving forward and the other moving backward simultaneously. This allows for continuous operation and load on the motor. The dual ram shaper has advantages of being suitable for mass production, minimizing lead time, and having easy tool changing. Its disadvantage is that it is only suitable for heavy duty operations when the job width is more.
Et0029 design and fabrication of pneumatic design and fabrication of pneumatic
This document describes a project to design and fabricate a pneumatic lifting table. It discusses how pneumatic systems use compressed air to transfer energy and do work by applying and releasing fluid pressure. The lifting table uses pneumatic power to safely raise and position heavy loads for ergonomic access. It can be powered by compressed air or alternative power sources.
Test
This function encodes a string to UTF-8 encoding. It returns the encoded string, or false if the encoding fails. UTF-8 is commonly used on the web as it can represent all possible characters and is compatible with ASCII.
Ayaklı pasta standları
Ayaklı pasta standları
http://www.endustriyelmutfakmalzemeleri.net/ayakli-pasta-standlari-pmk452
Economic Capsule - December 2013
The document is a newsletter from the Research & Development Unit of an organization dated December 2013. It contains several sections on financial sector news, analysis and forecasts, and economic and business news related to the banking and finance industry in Sri Lanka and globally. The main stories include Commercial Bank winning several awards for its annual report, the opening of new branches and automated banking facilities. It also includes analysis of credit growth, interest rates, and the outlook for the banking sector in Sri Lanka and Asia-Pacific in 2014. Other news items cover the external trade sector performance, global monetary policies, and the ratings of the European Union.
Recommended
Coolant for lathe
ECWAY TECHNOLOGIES
IEEE PROJECTS,HARDWARE & SOFTWARE DEVELOPMENTS
OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
BANGALORE / HYDRABAD
CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111
Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com
VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com
Et0049 fabrication of dual ram shaper to reducing lead time and increasing ...
This document describes a project to fabricate a dual ram shaper to reduce lead time and increase material removal rate compared to a normal shaper. A normal shaper uses a single ram, whereas the dual ram shaper uses two rams operated by a single motor, with one ram moving forward and the other moving backward simultaneously. This allows for continuous operation and load on the motor. The dual ram shaper has advantages of being suitable for mass production, minimizing lead time, and having easy tool changing. Its disadvantage is that it is only suitable for heavy duty operations when the job width is more.
Et0029 design and fabrication of pneumatic design and fabrication of pneumatic
This document describes a project to design and fabricate a pneumatic lifting table. It discusses how pneumatic systems use compressed air to transfer energy and do work by applying and releasing fluid pressure. The lifting table uses pneumatic power to safely raise and position heavy loads for ergonomic access. It can be powered by compressed air or alternative power sources.
Test
This function encodes a string to UTF-8 encoding. It returns the encoded string, or false if the encoding fails. UTF-8 is commonly used on the web as it can represent all possible characters and is compatible with ASCII.
Ayaklı pasta standları
Ayaklı pasta standları
http://www.endustriyelmutfakmalzemeleri.net/ayakli-pasta-standlari-pmk452
Economic Capsule - December 2013
The document is a newsletter from the Research & Development Unit of an organization dated December 2013. It contains several sections on financial sector news, analysis and forecasts, and economic and business news related to the banking and finance industry in Sri Lanka and globally. The main stories include Commercial Bank winning several awards for its annual report, the opening of new branches and automated banking facilities. It also includes analysis of credit growth, interest rates, and the outlook for the banking sector in Sri Lanka and Asia-Pacific in 2014. Other news items cover the external trade sector performance, global monetary policies, and the ratings of the European Union.
Coolant for lathe
Ecway Technologies provides engineering projects and software development services out of offices located in multiple cities across India. They specialize in fabrication of temperature monitoring systems for cutting tools with coolant circulating systems. The system monitors the temperature of a tool using a sensor and automatically starts a coolant pump to supply coolant to the lathe when the temperature increases above a specified level. The fully automated circulation system then shuts off the pump once the temperature decreases, helping maintain a constant temperature in the tool while avoiding coolant wastage and allowing automatic pump operation.
Fabrication of temperature monitoring system in cutting tool with coolant cir...
1) The document describes a project to fabricate a temperature monitoring system for a cutting tool with a coolant circulating system.
2) A temperature sensor placed in the tool post will monitor the temperature and automatically start a pump to supply coolant to the lathe when the temperature increases past a specified rate.
3) The fully monitored circulation system will automatically shut off the pump when the temperature decreases.
Fabrication of temperature monitoring system in cutting tool with coolant cir...
1) The document describes a project to fabricate a temperature monitoring system for a cutting tool with a coolant circulating system.
2) A temperature sensor placed in the tool post will monitor the temperature and automatically start a pump to supply coolant to the lathe when the temperature increases past a specified rate.
3) The fully monitored circulation system will automatically shut off the pump when the temperature decreases.
Coolant for lathe
1) The document describes a project to fabricate a temperature monitoring system for a cutting tool with a coolant circulating system.
2) A temperature sensor placed in the tool post will monitor the temperature and automatically start a pump to supply coolant to the lathe when the temperature increases past a specified rate.
3) The fully automated coolant circulation system will shut off the pump once the temperature decreases to regulate the temperature in the cutting tool.
Can crusher
Ecway Technologies provides engineering projects and software development services across multiple offices in India. They fabricate a mechanical can crusher that automatically crushes cans at high speed using a motor, crank shaft, connecting rod, and sliding blocks. When the motor turns on, it rotates the crank shaft which moves the connecting rod up and down to crush cans between the male and female dies. The can crusher reduces worker burden, is easy to operate, and allows adjustable stock length, but is only suitable for mass crushing and runs at a constant speed.
Can crusher
Ecway Technologies provides engineering projects and software development services from offices across South India and Bangalore/Hyderabad. They fabricate a mechanical can crusher that crushes cans at high speed for reuse in plastic industries. The can crusher works by using a motor to rotate a crankshaft which moves a connecting rod up and down, causing a slider block to crush cans between a male and female die. It reduces worker burden and is easy to operate, though it only runs at a constant speed and is meant for mass crushing.
Can crusher
Ecway Technologies provides engineering projects and software development services from offices located across South India and Bangalore/Hyderabad. They fabricate a mechanical can crusher that crushes cans at high speed, making it suitable for plastic recycling industries. The can crusher has a motor, crankshaft, connecting rod, slider block, and male/female dies. When the motor turns on, the crankshaft rotates via a belt and causes the connecting rod to move up and down, automatically crushing cans placed inside. The can crusher reduces worker burden, is easy to operate, and allows adjustable stock length, though it only runs at a constant speed and is meant for mass crushing of cans.
Can crusher
Ecway Technologies provides engineering projects and software development services from offices across South India and Bangalore/Hyderabad. They fabricate a mechanical can crusher that crushes cans at high speed for plastic recycling industries. The can crusher works by using a motor to rotate a crankshaft which moves a connecting rod up and down, causing a slider block to crush cans between a male and female die. It reduces worker burden and is easy to operate, though it only runs at a constant speed and is meant for mass crushing.
Can crusher
Ecway Technologies provides engineering projects and software development services across multiple offices in India. They fabricate a mechanical can crusher that efficiently crushes cans at high speed for reuse in plastic industries. The can crusher has a motor, crankshaft, connecting rod, slider block, and plunger block that work together to automatically crush cans when the motor is switched on and the crankshaft rotates. The can crusher reduces worker burden, is easy to operate, and allows adjustable stock length, but is only suitable for mass crushing and runs at a constant speed.
Can crusher
Ecway Technologies provides mechanical engineering projects and software development services out of multiple offices in India. They fabricate a mechanical can crusher that automatically crushes cans at high speed. The can crusher is useful for plastic recycling industries and consists of a steel frame, crankshaft, connecting rod, slider block, plunger block and motor. When the motor is turned on, the crankshaft rotates via a belt which causes the connecting rod to move up and down, crushing cans placed in the machine. The can crusher reduces worker burden, is easy to operate and allows adjustable stock length, but is only suitable for mass crushing and runs at a constant speed.
Engineering design guidelines cooling towers - rev01
This document provides an overview of cooling tower selection and sizing. It describes different types of cooling towers classified by air draft (natural, forced, induced), flow pattern (crossflow, counterflow), and construction (package, field erected). The document contains theories of cooling tower operation related to vapor pressure and humidity. It includes steps for sizing cooling towers using graphical methods and calculating make-up water and motor requirements. The intended audience is engineers performing preliminary equipment selection and specification.
PWG Company Brochure 2017
Pure Water Group is specialized in High Purity and Ultra Pure Water applications. Since more than 20 years the development of membrane filtration and Electro Deionization systems is our main focus. Based on our knowledge and experience, equipment is manufactured for water system integrators across the world. Our clients implement the equipment in the process and power industry, the pharmaceutical industry and at hemodialysis centers. As Ionpure 'Master Service Provider' we distribute CEDI modules and accessories direct from our European warehouse. The branch and product knowledge enable us to guarantee qualitative high-end solutions which meet your expectations on every level.
Atmospheric Water Generator (AWG)
An atmospheric water generator (AWG) extracts water from humid air by cooling the air below its dew point. It can produce potable water anywhere as there is always some water in the air. AWGs use cooling or desiccant methods to condense the water. They are useful when clean drinking water is unavailable. While AWGs have higher costs than municipal water, they provide clean drinking water without infrastructure where water is contaminated or scarce. Future improvements may enable their widespread use as alternatives to water purifiers.
EHLGROUP Capabilities 2015
EHL Group is an engineering company that provides innovative solutions and services to a variety of industries globally. They have expertise in motion control, fluid technology, instrumentation, automation, electrical engineering, and technical services. EHL can design, manufacture, service, and maintain complex systems, with capabilities like specialized engineering, fabrication, testing, and calibration. Their goal is to provide customized solutions and support for customers' engineering challenges.
EHLGROUP Capabilities 2015
The document provides an overview of EHL Group, an engineering company that offers a wide range of products and services for various industries. Some of its key capabilities include motion control, fluid technology, instrumentation, process control systems, automation, engineering, product supply, technical services, calibration, and gas generation. It serves industries such as food and beverage, marine, oil and gas, industrial, and more. The company aims to provide innovative design and engineering solutions to customers around the world.
Digital fuel level monitoring in ic engines
This document describes a digital fuel level monitoring system for internal combustion engines. The system uses a microcontroller to monitor the fuel level in a tank. When the level reaches a low threshold, an AC/DC motor pump is activated to fill the tank. The pump automatically shuts off when the maximum level is reached. Relays are used to control the pump motor based on signals from the microcontroller. The system aims to accurately monitor fuel levels and filling to avoid wastage through an automated process that reduces manual labor and maintenance needs.
Digital fuel level
This document describes a digital fuel level monitoring system for internal combustion engines. The system uses a microcontroller to monitor the fuel level in a tank. When the level reaches a low threshold, an AC/DC motor pump is activated to fill the tank. The pump automatically shuts off when the maximum level is reached. Relays are used to control the pump motor based on signals from the microcontroller. The system aims to accurately monitor fuel levels and filling to avoid wastage through an automated process that reduces manual labor and maintenance needs.
Digital fuel level
This document describes a digital fuel level monitoring system for internal combustion engines. The system uses a microcontroller to monitor the fuel level in a tank. When the fuel level becomes low, an AC/DC motor is used to pump more fuel into the tank. When the maximum fuel level is reached, the pump automatically shuts off. Relays are used to control the pump motor based on signals from the microcontroller. The system aims to accurately monitor fuel levels and filling to avoid wastage through an automated process that eliminates manual labor.
Digital fuel level monitoring in ic engines
This document describes a digital fuel level monitoring system for internal combustion engines. The system uses a microcontroller to monitor the fuel level in a tank. When the level reaches a low threshold, an AC/DC motor pump is activated to fill the tank. The pump automatically shuts off when the maximum level is reached. Relays are used to control the pump motor based on signals from the microcontroller. The system aims to accurately monitor fuel levels and filling to avoid wastage through an automated process that reduces manual labor and maintenance needs.
Digital fuel level
This document describes a digital fuel level monitoring system for internal combustion engines. The system uses a microcontroller to monitor the fuel level in a tank. When the level reaches a low threshold, an AC/DC motor pump is activated to fill the tank. The pump automatically shuts off when the maximum level is reached. Relays are used to control the pump motor based on signals from the microcontroller. The system aims to accurately monitor fuel levels and filling to avoid wastage through an automated process that reduces manual labor and maintenance needs.
More Related Content
Similar to Et0044 fabrication of automatic lubricating system
Coolant for lathe
Ecway Technologies provides engineering projects and software development services out of offices located in multiple cities across India. They specialize in fabrication of temperature monitoring systems for cutting tools with coolant circulating systems. The system monitors the temperature of a tool using a sensor and automatically starts a coolant pump to supply coolant to the lathe when the temperature increases above a specified level. The fully automated circulation system then shuts off the pump once the temperature decreases, helping maintain a constant temperature in the tool while avoiding coolant wastage and allowing automatic pump operation.
Fabrication of temperature monitoring system in cutting tool with coolant cir...
1) The document describes a project to fabricate a temperature monitoring system for a cutting tool with a coolant circulating system.
2) A temperature sensor placed in the tool post will monitor the temperature and automatically start a pump to supply coolant to the lathe when the temperature increases past a specified rate.
3) The fully monitored circulation system will automatically shut off the pump when the temperature decreases.
Fabrication of temperature monitoring system in cutting tool with coolant cir...
1) The document describes a project to fabricate a temperature monitoring system for a cutting tool with a coolant circulating system.
2) A temperature sensor placed in the tool post will monitor the temperature and automatically start a pump to supply coolant to the lathe when the temperature increases past a specified rate.
3) The fully monitored circulation system will automatically shut off the pump when the temperature decreases.
Coolant for lathe
1) The document describes a project to fabricate a temperature monitoring system for a cutting tool with a coolant circulating system.
2) A temperature sensor placed in the tool post will monitor the temperature and automatically start a pump to supply coolant to the lathe when the temperature increases past a specified rate.
3) The fully automated coolant circulation system will shut off the pump once the temperature decreases to regulate the temperature in the cutting tool.
Can crusher
Ecway Technologies provides engineering projects and software development services across multiple offices in India. They fabricate a mechanical can crusher that automatically crushes cans at high speed using a motor, crank shaft, connecting rod, and sliding blocks. When the motor turns on, it rotates the crank shaft which moves the connecting rod up and down to crush cans between the male and female dies. The can crusher reduces worker burden, is easy to operate, and allows adjustable stock length, but is only suitable for mass crushing and runs at a constant speed.
Can crusher
Ecway Technologies provides engineering projects and software development services from offices across South India and Bangalore/Hyderabad. They fabricate a mechanical can crusher that crushes cans at high speed for reuse in plastic industries. The can crusher works by using a motor to rotate a crankshaft which moves a connecting rod up and down, causing a slider block to crush cans between a male and female die. It reduces worker burden and is easy to operate, though it only runs at a constant speed and is meant for mass crushing.
Can crusher
Ecway Technologies provides engineering projects and software development services from offices located across South India and Bangalore/Hyderabad. They fabricate a mechanical can crusher that crushes cans at high speed, making it suitable for plastic recycling industries. The can crusher has a motor, crankshaft, connecting rod, slider block, and male/female dies. When the motor turns on, the crankshaft rotates via a belt and causes the connecting rod to move up and down, automatically crushing cans placed inside. The can crusher reduces worker burden, is easy to operate, and allows adjustable stock length, though it only runs at a constant speed and is meant for mass crushing of cans.
Can crusher
Ecway Technologies provides engineering projects and software development services from offices across South India and Bangalore/Hyderabad. They fabricate a mechanical can crusher that crushes cans at high speed for plastic recycling industries. The can crusher works by using a motor to rotate a crankshaft which moves a connecting rod up and down, causing a slider block to crush cans between a male and female die. It reduces worker burden and is easy to operate, though it only runs at a constant speed and is meant for mass crushing.
Can crusher
Ecway Technologies provides engineering projects and software development services across multiple offices in India. They fabricate a mechanical can crusher that efficiently crushes cans at high speed for reuse in plastic industries. The can crusher has a motor, crankshaft, connecting rod, slider block, and plunger block that work together to automatically crush cans when the motor is switched on and the crankshaft rotates. The can crusher reduces worker burden, is easy to operate, and allows adjustable stock length, but is only suitable for mass crushing and runs at a constant speed.
Can crusher
Ecway Technologies provides mechanical engineering projects and software development services out of multiple offices in India. They fabricate a mechanical can crusher that automatically crushes cans at high speed. The can crusher is useful for plastic recycling industries and consists of a steel frame, crankshaft, connecting rod, slider block, plunger block and motor. When the motor is turned on, the crankshaft rotates via a belt which causes the connecting rod to move up and down, crushing cans placed in the machine. The can crusher reduces worker burden, is easy to operate and allows adjustable stock length, but is only suitable for mass crushing and runs at a constant speed.
Engineering design guidelines cooling towers - rev01
This document provides an overview of cooling tower selection and sizing. It describes different types of cooling towers classified by air draft (natural, forced, induced), flow pattern (crossflow, counterflow), and construction (package, field erected). The document contains theories of cooling tower operation related to vapor pressure and humidity. It includes steps for sizing cooling towers using graphical methods and calculating make-up water and motor requirements. The intended audience is engineers performing preliminary equipment selection and specification.
PWG Company Brochure 2017
Pure Water Group is specialized in High Purity and Ultra Pure Water applications. Since more than 20 years the development of membrane filtration and Electro Deionization systems is our main focus. Based on our knowledge and experience, equipment is manufactured for water system integrators across the world. Our clients implement the equipment in the process and power industry, the pharmaceutical industry and at hemodialysis centers. As Ionpure 'Master Service Provider' we distribute CEDI modules and accessories direct from our European warehouse. The branch and product knowledge enable us to guarantee qualitative high-end solutions which meet your expectations on every level.
Atmospheric Water Generator (AWG)
An atmospheric water generator (AWG) extracts water from humid air by cooling the air below its dew point. It can produce potable water anywhere as there is always some water in the air. AWGs use cooling or desiccant methods to condense the water. They are useful when clean drinking water is unavailable. While AWGs have higher costs than municipal water, they provide clean drinking water without infrastructure where water is contaminated or scarce. Future improvements may enable their widespread use as alternatives to water purifiers.
EHLGROUP Capabilities 2015
EHL Group is an engineering company that provides innovative solutions and services to a variety of industries globally. They have expertise in motion control, fluid technology, instrumentation, automation, electrical engineering, and technical services. EHL can design, manufacture, service, and maintain complex systems, with capabilities like specialized engineering, fabrication, testing, and calibration. Their goal is to provide customized solutions and support for customers' engineering challenges.
EHLGROUP Capabilities 2015
The document provides an overview of EHL Group, an engineering company that offers a wide range of products and services for various industries. Some of its key capabilities include motion control, fluid technology, instrumentation, process control systems, automation, engineering, product supply, technical services, calibration, and gas generation. It serves industries such as food and beverage, marine, oil and gas, industrial, and more. The company aims to provide innovative design and engineering solutions to customers around the world.
Digital fuel level monitoring in ic engines
This document describes a digital fuel level monitoring system for internal combustion engines. The system uses a microcontroller to monitor the fuel level in a tank. When the level reaches a low threshold, an AC/DC motor pump is activated to fill the tank. The pump automatically shuts off when the maximum level is reached. Relays are used to control the pump motor based on signals from the microcontroller. The system aims to accurately monitor fuel levels and filling to avoid wastage through an automated process that reduces manual labor and maintenance needs.
Digital fuel level
This document describes a digital fuel level monitoring system for internal combustion engines. The system uses a microcontroller to monitor the fuel level in a tank. When the level reaches a low threshold, an AC/DC motor pump is activated to fill the tank. The pump automatically shuts off when the maximum level is reached. Relays are used to control the pump motor based on signals from the microcontroller. The system aims to accurately monitor fuel levels and filling to avoid wastage through an automated process that reduces manual labor and maintenance needs.
Digital fuel level
This document describes a digital fuel level monitoring system for internal combustion engines. The system uses a microcontroller to monitor the fuel level in a tank. When the fuel level becomes low, an AC/DC motor is used to pump more fuel into the tank. When the maximum fuel level is reached, the pump automatically shuts off. Relays are used to control the pump motor based on signals from the microcontroller. The system aims to accurately monitor fuel levels and filling to avoid wastage through an automated process that eliminates manual labor.
Digital fuel level monitoring in ic engines
This document describes a digital fuel level monitoring system for internal combustion engines. The system uses a microcontroller to monitor the fuel level in a tank. When the level reaches a low threshold, an AC/DC motor pump is activated to fill the tank. The pump automatically shuts off when the maximum level is reached. Relays are used to control the pump motor based on signals from the microcontroller. The system aims to accurately monitor fuel levels and filling to avoid wastage through an automated process that reduces manual labor and maintenance needs.
Digital fuel level
This document describes a digital fuel level monitoring system for internal combustion engines. The system uses a microcontroller to monitor the fuel level in a tank. When the level reaches a low threshold, an AC/DC motor pump is activated to fill the tank. The pump automatically shuts off when the maximum level is reached. Relays are used to control the pump motor based on signals from the microcontroller. The system aims to accurately monitor fuel levels and filling to avoid wastage through an automated process that reduces manual labor and maintenance needs.
Similar to Et0044 fabrication of automatic lubricating system (20)
Fabrication of temperature monitoring system in cutting tool with coolant cir...
Fabrication of temperature monitoring system in cutting tool with coolant cir...
Fabrication of temperature monitoring system in cutting tool with coolant cir...
Fabrication of temperature monitoring system in cutting tool with coolant cir...
Engineering design guidelines cooling towers - rev01
Engineering design guidelines cooling towers - rev01
Et0044 fabrication of automatic lubricating system
- 1. ECWAY TECHNOLOGIES IEEE PROJECTS & SOFTWARE DEVELOPMENTS OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE BANGALORE / HYDRABAD CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111 VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com FABRICATION OF AUTOMATIC LUBRICATING SYSTEM Synopsis A coolant is a fluid which flows through a device to prevent its overheating, transferring the heat produced by the device to other devices that use or dissipate it. An ideal coolant has high thermal capacity, low viscosity, is low-cost, non-toxic, and chemically inert, neither causing nor promoting corrosion of the cooling system The most common coolant is water. Its high heat capacity and low cost makes it a suitable heat-transfer medium. It is usually used with additives, like corrosion inhibitors and antifreeze. Antifreeze, a solution of a suitable organic chemical (most often ethylene glycol, diethyl glycol, or propylene glycol) in water, is used when the water-based coolant has to withstand temperatures below 0 °C, or when its boiling point has to be raised. In our project temperature monitoring system in cutting tool is monitored by a sensor which is placed in a tool post, when temperature increased from the specified rate ,automatically pump starts and supply the coolant to lathe, this circulation system is fully monitored by control system, when temperature decreases pump will automatically switched off .
- 2. JOB LANT COONOZZLE PLAT FORM CONTROL UNIT COOLANT PUMP TEMP SENSING UNIT TOOL Fabrication of temperature monitoring system in cutting tool with coolant circulating system LATHE CHUCK COOLANT LINE TANK Advantage 1) constant temperature is maintain in tool 2) coolant wastage is avoided 3) pump can be start automatically Disadvantage 1) System is closed loop so maintenance is tough