The DYN-206 dynamic torque sensor can measure both static and rotational torque with high accuracy and stability over long periods of time. It has a maximum speed of 4,000 rpm and outputs both positive and reverse torque signals. Specifications include measurement ranges up to 500 Nm, response times of 1 ms, and operating temperatures from -10 to 50 degrees Celsius. It connects on both ends with keys and has a cable length of 5 meters.

1. DAYSENSOR
DYN-206 Dynamic torque sensor
Features:
·Still torque can be measured, with the
rotational torque
·High accuracy, stable and reliable
performance
·It can run for a high speed and for a long
time
·Output a positive-reverse torque signal
·Both ends are key connections
·Maximum speed not exceeding 4,000 rpm
qualification
Scale N.m 0-5
RPM range Rpm ≤4000
Speed signal mv/V 1.0-2.0
Zero point output %F.S. ±2
Non-linear %F.S. 0.1
lag %F.S. 0.03
Repeatability %F.S. 0.03
Creep (30 min) %F.S. 0.03
Temperature sensitivity drift %F.S./10℃ 0.03
Zero temperature drift %F.S./10℃ 0.1
Response time ms(50% reaction) 1.0
Response frequency kHz 1
Maximum torsion angle 2.60x10rad(0.149°)
inertial torque kgcm 0.38
The ator vibrvibration inherent vibration kHz 19.4
The torsion constant Nm/rad 3.85x10
Material stainless steel
Year stability /year 0.3%
Load resistance Ω >2000
Use voltage V DC 12
Use current mA 0.2
consume current mA <150
Work environment -10-50℃ 0-85%RH
Safety overload 200%
Cable line specifications φ5x3m
Cable limit pull force N 98
1) High temperature sensors are available, with a maximum operating temperature of 150℃.
2) High impedance sensors can be provided with an output impedance of 1000 Ω.
https://www.loadcells.store

2. DAYSENSOR
Product Size Fig
Unit: mm
Range（N.m） A ΦL B C D E F K N M H
5/10/20/30/50/100 108 18 44 38 58 30 22 19 6 3-M3 6
200/300 143 28 56 53 73.5 40 30 27 6 2-M3 8
500/600/800 188 38 70 78 96 56 40 39 7 5-M8 10
force diagram
Load device | Coupling | Sensor | servo motor
Fixed installation
on both sides