DSP-LE-001 Datasheet PSV.pdf
•
0 likes•12 views
This document is a pressure safety valve data sheet for a natural gas line extension project. It provides specifications for a safety valve including operating pressure of 1200 psiG, design temperature of 140-200°F, maximum discharge of 2011.58 kg/h, and set pressure of 1440 psiG with 10% accumulation. The valve is a conventional type with 1.5" inlet, 600# flange, and 2" outlet, 300# flange.
Report
Share
Report
Share
Download to read offline
Recommended
1. va1 lici-00 eg-i-m4d-das-0001.positive displacement flowmeters
This document provides specifications for five positive displacement flowmeters used in the Vung Ang 1 Thermal Power Plant 2 x 600MW Heavy Fuel Oil System. It lists the tag numbers, line numbers, enclosure types, hazardous location classifications, power supplies, meter types, sizes, flow ranges, accuracies, materials, and other technical details for each flowmeter. Accessories including transmitters, indicators, and strainers are also specified. The flowmeters are used to measure fuel oil flow and have double case elements suitable for liquid service.
Pressure relief valve_data_sheet_rev01
This document contains technical specifications for equipment located at a client site, including tag number, service, operating pressures and temperatures, materials, sizes, ratings, and notes. Key details provided include the project name, unit tagged, line number and fluid. Normal and maximum operating pressures, temperatures, densities and viscosities are listed. Relief valve sizing requirements, inlet/outlet sizes, materials, and set pressures are also specified. The date and names of the preparer and reviewer are at the bottom.
PFD-PIDs.pdfmuiijgfh jjgdgjjddryujhgffgh
This document contains a process flow diagram and piping and instrumentation diagram for a natural gas production facility. The facility receives untreated natural gas from a production header at 700 psig and separates the liquids from the gas stream using a high pressure separator and low pressure separator. The dried natural gas is compressed before being exported via pipeline. Liquids are recovered from the separators and exported by pump. Key equipment includes a gas compressor, separators, export pump, and various valves, instruments and piping.
PSV Sizing - API Based
Excel sheet Download Link: https://www.scribd.com/document/385945712/PSV-Sizing-Tool-API-Based-Calc-Sheets
PSV Sizing for Blocked Liquid Discharge Condition
PSV Sizing for Blocked Gas Discharge Condition
PSV Sizing for Fire Case of Liquid Filled Vessel
PSV Sizing for Control Valve Fail Open Case
Relief Valve Sizing for Thermal Expansion
Restriction Orifice Sizing for Gas Flow
Restriction Orifice Sizing for Liquid Flow
Single Phase Flow Line Sizing Tool
Gas Control Valve Sizing Tool
C2 Hakkı Aydın
GEORG Geothermal Workshop 2016
Presentation Title: CO2 Decline Curve Analysis for Alaşehir Geothermal Field
Benfield system
This document provides information on the Benfield process for removing carbon dioxide from gas streams. It discusses key aspects of the process including:
- Absorption of CO2 into a potassium carbonate solution and regeneration of the solution by heating.
- Use of an activator like DEA to improve CO2 absorption.
- Comparison with other CO2 removal processes like Rectisol and considerations for process selection.
- Parameters that affect the absorption and regeneration steps like pressure, temperature, and flow rates.
- Causes and prevention of corrosion in the system through vanadium addition and factors that can cause foaming of the solution.
Britta Paetzold, HEAT
The LIFE FRONT team welcomes you to take part in a 1-hour workshop on the progress made by the project that aims at removing “barriers posed by standards” for flammable refrigerants in refrigeration, air conditioning and heat pump (RACHP) applications.
This workshop will take a closer look at how RACHP manufacturers can contribute to Europe’s largest leakage size database for equipment using hydrocarbons, which provides real figures to determine to which extent is safe to operate with bigger amounts of flammable refrigerants. For more info, visit http://lifefront.eu.
Javier Garcia - Verdugo Sanchez - Six Sigma Training - W4 Multiple Regression
The document discusses multiple regression analysis to model the relationship between inputs and outputs of a process. An example is provided of using measurements from 8 X-ray tubes to determine which input parameters influence the width, length, and unbalancedness of the focal spot, which are the critical outputs. Regression analysis indicates that ambient temperature and humidity define the necessary evaporation temperature to control cooling water usage. The analysis allows determining the required air amount based on water temperature to maintain ammonia loss between set limits.
Recommended
1. va1 lici-00 eg-i-m4d-das-0001.positive displacement flowmeters
This document provides specifications for five positive displacement flowmeters used in the Vung Ang 1 Thermal Power Plant 2 x 600MW Heavy Fuel Oil System. It lists the tag numbers, line numbers, enclosure types, hazardous location classifications, power supplies, meter types, sizes, flow ranges, accuracies, materials, and other technical details for each flowmeter. Accessories including transmitters, indicators, and strainers are also specified. The flowmeters are used to measure fuel oil flow and have double case elements suitable for liquid service.
Pressure relief valve_data_sheet_rev01
This document contains technical specifications for equipment located at a client site, including tag number, service, operating pressures and temperatures, materials, sizes, ratings, and notes. Key details provided include the project name, unit tagged, line number and fluid. Normal and maximum operating pressures, temperatures, densities and viscosities are listed. Relief valve sizing requirements, inlet/outlet sizes, materials, and set pressures are also specified. The date and names of the preparer and reviewer are at the bottom.
PFD-PIDs.pdfmuiijgfh jjgdgjjddryujhgffgh
This document contains a process flow diagram and piping and instrumentation diagram for a natural gas production facility. The facility receives untreated natural gas from a production header at 700 psig and separates the liquids from the gas stream using a high pressure separator and low pressure separator. The dried natural gas is compressed before being exported via pipeline. Liquids are recovered from the separators and exported by pump. Key equipment includes a gas compressor, separators, export pump, and various valves, instruments and piping.
PSV Sizing - API Based
Excel sheet Download Link: https://www.scribd.com/document/385945712/PSV-Sizing-Tool-API-Based-Calc-Sheets
PSV Sizing for Blocked Liquid Discharge Condition
PSV Sizing for Blocked Gas Discharge Condition
PSV Sizing for Fire Case of Liquid Filled Vessel
PSV Sizing for Control Valve Fail Open Case
Relief Valve Sizing for Thermal Expansion
Restriction Orifice Sizing for Gas Flow
Restriction Orifice Sizing for Liquid Flow
Single Phase Flow Line Sizing Tool
Gas Control Valve Sizing Tool
C2 Hakkı Aydın
GEORG Geothermal Workshop 2016
Presentation Title: CO2 Decline Curve Analysis for Alaşehir Geothermal Field
Benfield system
This document provides information on the Benfield process for removing carbon dioxide from gas streams. It discusses key aspects of the process including:
- Absorption of CO2 into a potassium carbonate solution and regeneration of the solution by heating.
- Use of an activator like DEA to improve CO2 absorption.
- Comparison with other CO2 removal processes like Rectisol and considerations for process selection.
- Parameters that affect the absorption and regeneration steps like pressure, temperature, and flow rates.
- Causes and prevention of corrosion in the system through vanadium addition and factors that can cause foaming of the solution.
Britta Paetzold, HEAT
The LIFE FRONT team welcomes you to take part in a 1-hour workshop on the progress made by the project that aims at removing “barriers posed by standards” for flammable refrigerants in refrigeration, air conditioning and heat pump (RACHP) applications.
This workshop will take a closer look at how RACHP manufacturers can contribute to Europe’s largest leakage size database for equipment using hydrocarbons, which provides real figures to determine to which extent is safe to operate with bigger amounts of flammable refrigerants. For more info, visit http://lifefront.eu.
Javier Garcia - Verdugo Sanchez - Six Sigma Training - W4 Multiple Regression
The document discusses multiple regression analysis to model the relationship between inputs and outputs of a process. An example is provided of using measurements from 8 X-ray tubes to determine which input parameters influence the width, length, and unbalancedness of the focal spot, which are the critical outputs. Regression analysis indicates that ambient temperature and humidity define the necessary evaporation temperature to control cooling water usage. The analysis allows determining the required air amount based on water temperature to maintain ammonia loss between set limits.
R-22 Phase Out in Indonesia
HCFC or R-22 refrigerant phase out schedule in Indonesia as well treatment or disposal oh the refrigerant
HGSC Technique Presentation2.pptx
The document describes a multi-unit plugging removal technique called HGSC. It works by heating, dissolution, and chemical reaction mechanisms to remove organic deposits in wells. The technique involves injecting a heated chemical solution to warm the wellbore, dissolve deposits, and prevent scaling through chelation. It has been applied to over 20 wells in China, increasing oil production and cumulative gains in all cases. The technique is simple, safe, and can be adjusted based on reservoir conditions.
Black Gold Rush Industries Vent Gas Destruction Presentation
With efficiencies greater than 99.99% as low as 0.09 psi operators are able to reduce their carbon footprint without breaking the budget!
CO2 REVAL SECTION .2022.pptx
Tensor and vector quantity components?
Diffusion quantities
1. Velocity
2. Flux across the plane
3. Flux relative to the plane
4. Concentration and Molar density
5. Concentration gradient
Channeling is defined as at low liquid flow rate the packing surface was covered by the liquid partially so some of the packing will be dry and some will be wet.
Channeling was the severe causes in the stacked packing comparing with the dumped packing towers.
Channeling can be minimized if the tower diameter was 8 times the packing diameter.
Super facial gas velocity = uo*density of the gas
At loading point in a packed column the liquid was hold by the stream of gas this can be identified by the steeper increases in pressure drop.
Gas velocity should be calculated to avoid the flooding velocity.
The gas velocity should be maintained below the flooding velocity to increase the mass transfer rate.
If the gas velocity lowers the designing of tower will impact the diameter of the tower to be increases and the reduction in the mass transfer rate. Benefits usi g lower gas flow rate was decreased pressure drop will occurs in the tower.
400 bpm dual filling sytem(completed)
This document provides information about a PET bottle blowing plant with a capacity of 450 bottles per minute (BPM). It describes the bottle blowing process which involves heating the preform, stretching it with air pressure inside a mold to form the bottle shape. It orients the polymer chains for strength. The document also lists specifications for the preforms and blown PET bottles. Key details include intrinsic viscosity requirements, moisture limits, and methods for measuring bottle height, diameter, and material distribution.
LCA and risk assessment of sewage sludge application to land compared to pho...
LCA and risk assessment of sewage sludge application to land compared to pho...European Sustainable Phosphorus Platform
Presentation at the ESPP stakeholder meeting concerning the use on farmland of sewage biosolids (04/12/2018) organised by the European Sustainable Phosphorus Platform (ESPP, www.phosphorusplatform.eu)
All outcomes of the meeting can be found here https://www.phosphorusplatform.eu/activities/conference/meeting-archive/1788-espp-meeting-sludge-2018Aeration Tank
This document provides design calculations for the aeration system of a conventional activated sludge plant treating 10 MLD of sewage. Key details include:
- The aeration tank volume is calculated as 2190.48 cubic meters based on an F/M ratio of 0.35/day and mean cell residence time of 3 days.
- The oxygen requirement is calculated as 2070 kg/day. Surface aerators would require 110 kW while diffused aeration would require 105 kW of compressor power.
- Sludge production calculations determine an excess sludge pump capacity of 436 cubic meters per day and return sludge pump capacity of 5 MLD.
Final presentation
The presentation was on final year design project, "Production of LPG from NGLs and condensate". It includes process selection, establishing a flow diagram for the selected process, the sizing of main equipments, detailed design of four Major equipments along with P & ID control for the systems and finally the economic evaluation was conducted to check the feasibility of the process. The final product composition of LPG was simulated using Aspen HYSYS and found to be 49% Propane and 21% butane.
2010 Sfpe Cpd On Explosion Venting
The document discusses explosion venting requirements for low and high-strength enclosures according to various codes and standards including the Ontario Fire Code, NFPA 68, and the Ministry of Labour. It provides information on definitions of key terms like reduced pressure, static activation pressure, and deflagration index. Examples are given for calculating vent size using different methods in the codes. Factors that affect vent sizing like dust type, enclosure volume, and number of vents are also addressed.
OISD.ppt
The document discusses standards and regulations for hazardous industries handling LPG, including storage and handling. It summarizes key points from OISD Standard 144 regarding LPG installations. Some important requirements covered are safety distances between facilities, plant layout considerations, storage vessel design criteria, fire protection facilities like sprinkler systems and firewater storage, and gas monitoring systems. Detector locations and functions of the monitoring system are also outlined.
MC _ CP Rev.0.pdf
The document is a calculation report for a cathodic protection system for a 12" pipeline. It includes:
- Design of a cathodic protection system using vertical magnesium galvanic anodes.
- Calculations to determine coating damage, surface area to protect, current requirements, anode size and quantity needed.
- Recommendation to install seven anode beds along the pipeline to provide protection, with details on anode type, size, installation and connection to the pipeline.
1975Z-1-TBT-1011-0001-B1
This document provides a technical evaluation of proposals from MAN Diesel & Turbo (MDT) and Siemens for a chlorine compressor package for the SLIC HCL Recycle Project. For MDT's proposal, the evaluation covers MDT's compressor train arrangement, shaft seals, casing, performance predictions, and thermodynamic model. For Siemens' proposal, the evaluation similarly covers Siemens' compressor train arrangement, shaft seals, casing, performance predictions, and thermodynamic model. The document also includes 6 appendices providing additional detailed evaluation results and documentation.
Does Heavy Oil Recovery Need Steam?
Heavy Oil recovery traditionally starts with depletion drive and (natural) waterdrive with very low recoveries as a result. As EOR technique, steam injection has been matured since the 1950s using CSS (cyclic steam stimulation), steam drive or steam flooding, and SAGD (steam assisted gravity drainage). The high energy cost of heating up the oil bearing formation to steam temperature and the associated high CO2 footprint make steam based technology less attractive today and many companies in the industry have been actively trying to find alternatives or improvements. As a result there are now many more energy efficient recovery technologies that can unlock heavy oil resources compared with only a decade ago. This presentation will discuss breakthrough alternatives to steam based recovery as well as incremental improvement options to steam injection techniques. The key message is the importance to consider these techniques because steam injection is costly and has a high CO2 footprint
Johan van Dorp holds an MSc in Experimental Physics from Utrecht University and joined Shell in 1981. He has served on several international assignments, mainly in petroleum and reservoir engineering roles. He recently led the extra heavy-oil research team at the Shell Technology Centre in Calgary, focusing on improved in-situ heavy-oil recovery technologies. Van Dorp also was Shell Group Principal Technical Expert in Thermal EOR and has been involved with most thermal projects in Shell throughout the world, including in California, Oman, the Netherlands, and Canada. He retired from Shell after more than 35 years in Oct 2016. Van Dorp (co-)authored 13 SPE papers on diverse subjects.
mcl811-31.ppt
This document discusses advanced gas power generation systems and ways to improve efficiency. It addresses concerns with current systems like high internal power consumption during compression. New initiatives aim to achieve over 60% efficiency through technologies like intercooling and steam injection. Advanced cycle options being explored include wet compression cycles and integrated wet compression and steam injected gas turbine cycles. Accurately modeling gas power cycles requires accounting for variable properties of gases and irreversible processes.
WtE-Gulf forum presentation
This document presents a proposal for a waste to energy plant in Jeddah, Saudi Arabia. It discusses the background and milestones of the project, including agreements signed in 2005, 2007, and 2008. It then outlines the benefits of the project, such as improving environmental standards, reducing greenhouse gas emissions from landfills, and promoting renewable energy. The document provides an overview of the proposed gasification technology and its multi-stage integrated process to convert waste into syngas and then electricity. It compares the advanced thermal process system technology favorably to incineration in terms of energy recovery, emissions, and footprint. The presentation aims to gain approval for the waste to energy plant project.
20392769 design-calculation-cathodic-protection-impressed-cureent-system
This document provides the design and calculations for an impressed current cathodic protection system for an offshore pipeline and underground plant piping. It includes definitions, location data of the pipeline, design concepts, calculation methods, formulas used, and considerations for interference mitigation. The cathodic protection system will use mixed metal oxide anodes in a deep well groundbed configuration to provide corrosion protection for the pipeline and meet criteria for protective potentials outlined in relevant standards.
20392769 design-calculation-cathodic-protection-impressed-cureent-system
This document provides the design and calculation of an impressed current cathodic protection system for the Gunung Megang - Singa gas compression and pipeline facility in Indonesia. It outlines the pipeline details and location data, design concepts, calculation methods, and considerations for interference mitigation. The cathodic protection system will utilize mixed metal oxide anodes in a deep well groundbed configuration to protect the coated pipelines and achieve a protective potential between -900mV and -1,050mV. Calculations will be performed to determine surface area, current requirements, anode quantities, groundbed and cable resistances, transformer-rectifier output capacity, and potential attenuation. Mitigation of interference on neighboring pipelines will also be addressed.
Ammonia Slip Emission Control in DeNOx processes
This document discusses controlling ammonia (NH3) slip in combustion processes. It provides an overview of technologies for reducing oxides of nitrogen (NOx) emissions from combustion furnaces, including low NOx burners, over fire air, reburn, and selective catalytic reduction (SCR). SCR can reduce NOx by 80-90% but requires higher upfront costs while selective non-catalytic reduction (SNCR) reduces NOx by 40-60% with lower operation costs. Laser-based gas analyzers provide benefits for measuring NH3 slip including fast response, no sampling system, ability to handle high dust environments, and low maintenance needs.
Pumping & Compression Of carbon di oxide gas in industrial.pdf
The document provides an overview of pumping and compressing carbon dioxide (CO2). It discusses various CO2 capture methods from power plants and other large stationary sources. It then covers compressing CO2 to a supercritical fluid state for transportation via pipelines. The challenges of pumping CO2 include its non-lubricating properties and potential to form dry ice crystals. Experience pumping CO2 for oilfield applications dating back to the 1980s is also discussed. Thermodynamic properties like pressure-enthalpy diagrams are presented to understand CO2 behavior during compression.
CP 200 Drawing Rev.0 Model (1).pdf
This document appears to be a header for a technical drawing or engineering plan containing abbreviations for common fields including: engineering plan (EP), intellectual property (IP), date, description, drawn by, checked by, approved by, job number, drawing number, revision, and legal entity (LE). The header provides identifying information at a high level for technical drawings but does not contain details about a specific plan.
Pirolisis continua opcion 1
El documento habla sobre un reactor pirolítico continuo. Este reactor utiliza altas temperaturas para descomponer materiales orgánicos en forma continua y producir gases de síntesis y carbón. El proceso pirolítico continuo puede ser una opción viable para la producción sostenible de combustibles y productos químicos.
A100 rev.0 model
This document appears to be a header for a technical drawing or document. It lists fields for no date, description, who drew or designed it, who checked it, and who approved it. It also includes fields for job number and drawing number as well as a revision field.
More Related Content
Similar to DSP-LE-001 Datasheet PSV.pdf
R-22 Phase Out in Indonesia
HCFC or R-22 refrigerant phase out schedule in Indonesia as well treatment or disposal oh the refrigerant
HGSC Technique Presentation2.pptx
The document describes a multi-unit plugging removal technique called HGSC. It works by heating, dissolution, and chemical reaction mechanisms to remove organic deposits in wells. The technique involves injecting a heated chemical solution to warm the wellbore, dissolve deposits, and prevent scaling through chelation. It has been applied to over 20 wells in China, increasing oil production and cumulative gains in all cases. The technique is simple, safe, and can be adjusted based on reservoir conditions.
Black Gold Rush Industries Vent Gas Destruction Presentation
With efficiencies greater than 99.99% as low as 0.09 psi operators are able to reduce their carbon footprint without breaking the budget!
CO2 REVAL SECTION .2022.pptx
Tensor and vector quantity components?
Diffusion quantities
1. Velocity
2. Flux across the plane
3. Flux relative to the plane
4. Concentration and Molar density
5. Concentration gradient
Channeling is defined as at low liquid flow rate the packing surface was covered by the liquid partially so some of the packing will be dry and some will be wet.
Channeling was the severe causes in the stacked packing comparing with the dumped packing towers.
Channeling can be minimized if the tower diameter was 8 times the packing diameter.
Super facial gas velocity = uo*density of the gas
At loading point in a packed column the liquid was hold by the stream of gas this can be identified by the steeper increases in pressure drop.
Gas velocity should be calculated to avoid the flooding velocity.
The gas velocity should be maintained below the flooding velocity to increase the mass transfer rate.
If the gas velocity lowers the designing of tower will impact the diameter of the tower to be increases and the reduction in the mass transfer rate. Benefits usi g lower gas flow rate was decreased pressure drop will occurs in the tower.
400 bpm dual filling sytem(completed)
This document provides information about a PET bottle blowing plant with a capacity of 450 bottles per minute (BPM). It describes the bottle blowing process which involves heating the preform, stretching it with air pressure inside a mold to form the bottle shape. It orients the polymer chains for strength. The document also lists specifications for the preforms and blown PET bottles. Key details include intrinsic viscosity requirements, moisture limits, and methods for measuring bottle height, diameter, and material distribution.
LCA and risk assessment of sewage sludge application to land compared to pho...
LCA and risk assessment of sewage sludge application to land compared to pho...European Sustainable Phosphorus Platform
Presentation at the ESPP stakeholder meeting concerning the use on farmland of sewage biosolids (04/12/2018) organised by the European Sustainable Phosphorus Platform (ESPP, www.phosphorusplatform.eu)
All outcomes of the meeting can be found here https://www.phosphorusplatform.eu/activities/conference/meeting-archive/1788-espp-meeting-sludge-2018Aeration Tank
This document provides design calculations for the aeration system of a conventional activated sludge plant treating 10 MLD of sewage. Key details include:
- The aeration tank volume is calculated as 2190.48 cubic meters based on an F/M ratio of 0.35/day and mean cell residence time of 3 days.
- The oxygen requirement is calculated as 2070 kg/day. Surface aerators would require 110 kW while diffused aeration would require 105 kW of compressor power.
- Sludge production calculations determine an excess sludge pump capacity of 436 cubic meters per day and return sludge pump capacity of 5 MLD.
Final presentation
The presentation was on final year design project, "Production of LPG from NGLs and condensate". It includes process selection, establishing a flow diagram for the selected process, the sizing of main equipments, detailed design of four Major equipments along with P & ID control for the systems and finally the economic evaluation was conducted to check the feasibility of the process. The final product composition of LPG was simulated using Aspen HYSYS and found to be 49% Propane and 21% butane.
2010 Sfpe Cpd On Explosion Venting
The document discusses explosion venting requirements for low and high-strength enclosures according to various codes and standards including the Ontario Fire Code, NFPA 68, and the Ministry of Labour. It provides information on definitions of key terms like reduced pressure, static activation pressure, and deflagration index. Examples are given for calculating vent size using different methods in the codes. Factors that affect vent sizing like dust type, enclosure volume, and number of vents are also addressed.
OISD.ppt
The document discusses standards and regulations for hazardous industries handling LPG, including storage and handling. It summarizes key points from OISD Standard 144 regarding LPG installations. Some important requirements covered are safety distances between facilities, plant layout considerations, storage vessel design criteria, fire protection facilities like sprinkler systems and firewater storage, and gas monitoring systems. Detector locations and functions of the monitoring system are also outlined.
MC _ CP Rev.0.pdf
The document is a calculation report for a cathodic protection system for a 12" pipeline. It includes:
- Design of a cathodic protection system using vertical magnesium galvanic anodes.
- Calculations to determine coating damage, surface area to protect, current requirements, anode size and quantity needed.
- Recommendation to install seven anode beds along the pipeline to provide protection, with details on anode type, size, installation and connection to the pipeline.
1975Z-1-TBT-1011-0001-B1
This document provides a technical evaluation of proposals from MAN Diesel & Turbo (MDT) and Siemens for a chlorine compressor package for the SLIC HCL Recycle Project. For MDT's proposal, the evaluation covers MDT's compressor train arrangement, shaft seals, casing, performance predictions, and thermodynamic model. For Siemens' proposal, the evaluation similarly covers Siemens' compressor train arrangement, shaft seals, casing, performance predictions, and thermodynamic model. The document also includes 6 appendices providing additional detailed evaluation results and documentation.
Does Heavy Oil Recovery Need Steam?
Heavy Oil recovery traditionally starts with depletion drive and (natural) waterdrive with very low recoveries as a result. As EOR technique, steam injection has been matured since the 1950s using CSS (cyclic steam stimulation), steam drive or steam flooding, and SAGD (steam assisted gravity drainage). The high energy cost of heating up the oil bearing formation to steam temperature and the associated high CO2 footprint make steam based technology less attractive today and many companies in the industry have been actively trying to find alternatives or improvements. As a result there are now many more energy efficient recovery technologies that can unlock heavy oil resources compared with only a decade ago. This presentation will discuss breakthrough alternatives to steam based recovery as well as incremental improvement options to steam injection techniques. The key message is the importance to consider these techniques because steam injection is costly and has a high CO2 footprint
Johan van Dorp holds an MSc in Experimental Physics from Utrecht University and joined Shell in 1981. He has served on several international assignments, mainly in petroleum and reservoir engineering roles. He recently led the extra heavy-oil research team at the Shell Technology Centre in Calgary, focusing on improved in-situ heavy-oil recovery technologies. Van Dorp also was Shell Group Principal Technical Expert in Thermal EOR and has been involved with most thermal projects in Shell throughout the world, including in California, Oman, the Netherlands, and Canada. He retired from Shell after more than 35 years in Oct 2016. Van Dorp (co-)authored 13 SPE papers on diverse subjects.
mcl811-31.ppt
This document discusses advanced gas power generation systems and ways to improve efficiency. It addresses concerns with current systems like high internal power consumption during compression. New initiatives aim to achieve over 60% efficiency through technologies like intercooling and steam injection. Advanced cycle options being explored include wet compression cycles and integrated wet compression and steam injected gas turbine cycles. Accurately modeling gas power cycles requires accounting for variable properties of gases and irreversible processes.
WtE-Gulf forum presentation
This document presents a proposal for a waste to energy plant in Jeddah, Saudi Arabia. It discusses the background and milestones of the project, including agreements signed in 2005, 2007, and 2008. It then outlines the benefits of the project, such as improving environmental standards, reducing greenhouse gas emissions from landfills, and promoting renewable energy. The document provides an overview of the proposed gasification technology and its multi-stage integrated process to convert waste into syngas and then electricity. It compares the advanced thermal process system technology favorably to incineration in terms of energy recovery, emissions, and footprint. The presentation aims to gain approval for the waste to energy plant project.
20392769 design-calculation-cathodic-protection-impressed-cureent-system
This document provides the design and calculations for an impressed current cathodic protection system for an offshore pipeline and underground plant piping. It includes definitions, location data of the pipeline, design concepts, calculation methods, formulas used, and considerations for interference mitigation. The cathodic protection system will use mixed metal oxide anodes in a deep well groundbed configuration to provide corrosion protection for the pipeline and meet criteria for protective potentials outlined in relevant standards.
20392769 design-calculation-cathodic-protection-impressed-cureent-system
This document provides the design and calculation of an impressed current cathodic protection system for the Gunung Megang - Singa gas compression and pipeline facility in Indonesia. It outlines the pipeline details and location data, design concepts, calculation methods, and considerations for interference mitigation. The cathodic protection system will utilize mixed metal oxide anodes in a deep well groundbed configuration to protect the coated pipelines and achieve a protective potential between -900mV and -1,050mV. Calculations will be performed to determine surface area, current requirements, anode quantities, groundbed and cable resistances, transformer-rectifier output capacity, and potential attenuation. Mitigation of interference on neighboring pipelines will also be addressed.
Ammonia Slip Emission Control in DeNOx processes
This document discusses controlling ammonia (NH3) slip in combustion processes. It provides an overview of technologies for reducing oxides of nitrogen (NOx) emissions from combustion furnaces, including low NOx burners, over fire air, reburn, and selective catalytic reduction (SCR). SCR can reduce NOx by 80-90% but requires higher upfront costs while selective non-catalytic reduction (SNCR) reduces NOx by 40-60% with lower operation costs. Laser-based gas analyzers provide benefits for measuring NH3 slip including fast response, no sampling system, ability to handle high dust environments, and low maintenance needs.
Pumping & Compression Of carbon di oxide gas in industrial.pdf
The document provides an overview of pumping and compressing carbon dioxide (CO2). It discusses various CO2 capture methods from power plants and other large stationary sources. It then covers compressing CO2 to a supercritical fluid state for transportation via pipelines. The challenges of pumping CO2 include its non-lubricating properties and potential to form dry ice crystals. Experience pumping CO2 for oilfield applications dating back to the 1980s is also discussed. Thermodynamic properties like pressure-enthalpy diagrams are presented to understand CO2 behavior during compression.
Similar to DSP-LE-001 Datasheet PSV.pdf (19)
Black Gold Rush Industries Vent Gas Destruction Presentation
Black Gold Rush Industries Vent Gas Destruction Presentation
LCA and risk assessment of sewage sludge application to land compared to pho...
LCA and risk assessment of sewage sludge application to land compared to pho...
20392769 design-calculation-cathodic-protection-impressed-cureent-system
20392769 design-calculation-cathodic-protection-impressed-cureent-system
20392769 design-calculation-cathodic-protection-impressed-cureent-system
20392769 design-calculation-cathodic-protection-impressed-cureent-system
Pumping & Compression Of carbon di oxide gas in industrial.pdf
Pumping & Compression Of carbon di oxide gas in industrial.pdf
More from Pedro Marquez
CP 200 Drawing Rev.0 Model (1).pdf
This document appears to be a header for a technical drawing or engineering plan containing abbreviations for common fields including: engineering plan (EP), intellectual property (IP), date, description, drawn by, checked by, approved by, job number, drawing number, revision, and legal entity (LE). The header provides identifying information at a high level for technical drawings but does not contain details about a specific plan.
Pirolisis continua opcion 1
El documento habla sobre un reactor pirolítico continuo. Este reactor utiliza altas temperaturas para descomponer materiales orgánicos en forma continua y producir gases de síntesis y carbón. El proceso pirolítico continuo puede ser una opción viable para la producción sostenible de combustibles y productos químicos.
A100 rev.0 model
This document appears to be a header for a technical drawing or document. It lists fields for no date, description, who drew or designed it, who checked it, and who approved it. It also includes fields for job number and drawing number as well as a revision field.
Evaluation of gas handling capacity of the ellen east gas gathering system (5)
This document evaluates the gas handling capacity of the Ellen East gas gathering system operated by Laredo Energy. It details two case studies: Case A looks at adding a hypothetical new well near existing wells #4-H and #9-H. Case B examines a new well near #12-H. The methodology calculates the maximum capacity while maintaining a minimum pressure of 1000psig at the Ellen East Drip Station. For both cases, simulations using Pipephase software found: Case A can handle an additional 50 MMSCFD if flow pressure is 1200psig. Case B can handle 22.4 MMSCFD at 1200psig. The report provides technical details on wells, piping, and modeling to support the
Plant view pig launcher trap_pll-le-001_rev 00 (1)
This document appears to be a technical drawing or blueprint. It includes dimensions ranging from 1 foot 1 inch to 24 feet 10 and 3/4 inches. Various parts of the drawing are labeled as being drawn, checked, or approved, though no names or dates are included. The drawing is for Sideline Testing LLC and includes a job number and drawing number, though no revision is specified.
Icda mx line mrpl_multiphase flow modeling report draft 1.0
This document provides a summary of multiphase flow modeling conducted on the MX Line pipeline system. The modeling was performed using Aspen Hysys software to determine critical velocities and inclination angles for water accumulation. Key details include:
1. The pipeline system consists of 16", 14", and 12" diameter sections totaling 11 km in length. Modeling scenarios examined flow from 2001-2015 and changes in 2015 and 2017.
2. Gas analysis, water content analysis, and the pipeline elevation profile were used to build and run the simulation model. The model was run under steady state conditions to generate results.
3. Results are presented for Scenario 1 examining 21 years of saturated water vapor gas flow at
Dibujo
El documento describe los componentes de una instalación de protección catódica, incluyendo postes de señalización, una subestación eléctrica, acometidas eléctricas, cables anódicos, anodos inertes rellenos de coque, empalmes de conexión aislados y una caja de conexiones para tuberías protegidas por una caseta.
Id88 okereke nu_updated_211014
The document discusses numerical prediction of slugging problems in pipes. It provides a literature review of existing models for key slugging parameters like liquid holdup, pressure drop, and slug frequency. It analyzes Gregory et al's 1978 correlation for liquid holdup against simulations of a 3000 bopd deepwater oil field case study. The simulation results matched the trend of the correlation but overpredicted liquid holdup. Sensitivity analysis showed that increasing superficial gas velocity decreases liquid holdup. Pressure drop models like Beggs and Brill are also discussed. The goal is to better understand the interaction between gas surge and liquid slugs during slugging.
Dti a-502-pb-2-rev-a
Este documento presenta un diagrama de tubería e instrumentación para el área contractual 18, campo Peñablanca. El diagrama muestra el sistema de medición de gas de la estación de recolección de gas Peñablanca-2. El documento incluye información sobre el proyecto, lugar, escala, dibujante, revisor, coordinador y aprobador.
22425400 maggiolo-r-1-optimizacion-de-la-produccion-mediante-analisis-nodal
El documento describe una metodología para optimizar sistemas de producción de hidrocarburos utilizando el análisis nodal. El curso contiene cinco capítulos que cubren: 1) los componentes del sistema de producción, 2) el comportamiento de flujo en el yacimiento y la completación, 3) correlaciones de flujo multifásico en tuberías, 4) la capacidad de producción de pozos, y 5) la metodología de optimización que incluye cotejar el comportamiento actual y optimizar los componentes del sistema. El objetivo es a
More from Pedro Marquez (10)
Evaluation of gas handling capacity of the ellen east gas gathering system (5)
Evaluation of gas handling capacity of the ellen east gas gathering system (5)
Plant view pig launcher trap_pll-le-001_rev 00 (1)
Plant view pig launcher trap_pll-le-001_rev 00 (1)
Icda mx line mrpl_multiphase flow modeling report draft 1.0
Icda mx line mrpl_multiphase flow modeling report draft 1.0
22425400 maggiolo-r-1-optimizacion-de-la-produccion-mediante-analisis-nodal
22425400 maggiolo-r-1-optimizacion-de-la-produccion-mediante-analisis-nodal
Recently uploaded
ARENA - Young adults in the workplace (Knight Moves).pdf
Presentations of Bavo Raeymaekers (Project lead youth unemployment at the City of Antwerp), Suzan Martens (Service designer at Knight Moves) and Adriaan De Keersmaeker (Community manager at Talk to C)
during the 'Arena • Young adults in the workplace' conference hosted by Knight Moves.
一比一原版美国哥伦比亚大学毕业证Columbia成绩单一模一样
原件一模一样【微信：6496090】【美国哥伦比亚大学毕业证Columbia学位证成绩单】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Discovering the Best Indian Architects A Spotlight on Design Forum Internatio...
Discovering the Best Indian Architects A Spotlight on Design Forum Internatio...Designforuminternational
India’s architectural landscape is a vibrant tapestry that weaves together the country's rich cultural heritage and its modern aspirations. From majestic historical structures to cutting-edge contemporary designs, the work of Indian architects is celebrated worldwide. Among the many firms shaping this dynamic field, Design Forum International stands out as a leader in innovative and sustainable architecture. This blog explores some of the best Indian architects, highlighting their contributions and showcasing the most famous architects in India.一比一原版南安普顿索伦特大学毕业证Southampton成绩单一模一样
原件一模一样【微信：6496090】【南安普顿索伦特大学毕业证Southampton学位证成绩单】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理南安普顿索伦特大学毕业证Southampton学位证【微信：6496090 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理南安普顿索伦特大学毕业证Southampton学位证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理南安普顿索伦特大学毕业证Southampton学位证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理南安普顿索伦特大学毕业证Southampton学位证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版马里兰大学毕业证(UMD毕业证书)如何办理
学校原件一模一样【微信：6496090】【马里兰大学毕业证(UMD毕业证书)成绩单学位证】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理马里兰大学毕业证(UMD毕业证书)【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理马里兰大学毕业证(UMD毕业证书)【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理马里兰大学毕业证(UMD毕业证书)【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理马里兰大学毕业证(UMD毕业证书)【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Timeless Principles of Good Design
Timeless Principles of Good Design from my 2015 Presentation at TYPO SF
International Upcycling Research Network advisory board meeting 4
Slides used for the International Upcycling Research Network advisory board 4 (last one). The project is based at De Montfort University in Leicester, UK, and funded by the Arts and Humanities Research Council.
Practical eLearning Makeovers for Everyone
Welcome to Practical eLearning Makeovers for Everyone. In this presentation, we’ll take a look at a bunch of easy-to-use visual design tips and tricks. And we’ll do this by using them to spruce up some eLearning screens that are in dire need of a new look.
Heuristics Evaluation - How to Guide.pdf
This guide helps identify potential issues related to navigation, clarity, consistency, and other factors that can affect user experience.
Graphic Design Tools and Software .pptx
Explore the essential graphic design tools and software that can elevate your creative projects. Discover industry favorites and innovative solutions for stunning design results.
Divertidamente SLIDE.pptxufururururuhrurid8dj
Hsuehebvdhdueuw8wiiwieih3udud8e8wisbdydvw7wbidj38ehehdheuwjhdiwjwieheheueurhryrurhrgryd7eueue
定制美国西雅图城市大学毕业证学历证书原版一模一样
原版一模一样【微信：741003700 】【美国西雅图城市大学毕业证学历证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
哪里办理美国中央华盛顿大学毕业证双学位证书原版一模一样
原版一模一样【微信：741003700 】【美国中央华盛顿大学毕业证双学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版阿肯色大学毕业证(UCSF毕业证书)如何办理
学校原件一模一样【微信：6496090】【阿肯色大学毕业证(UCSF毕业证书)成绩单学位证】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理阿肯色大学毕业证(UCSF毕业证书)【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理阿肯色大学毕业证(UCSF毕业证书)【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理阿肯色大学毕业证(UCSF毕业证书)【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理阿肯色大学毕业证(UCSF毕业证书)【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Manual ISH (International Society of Hypertension)
Manual ISH (International Society of Hypertension)
原版制作(MDIS毕业证书)新加坡管理发展学院毕业证学位证一模一样
学校原件一模一样【微信：741003700 】《(MDIS毕业证书)新加坡管理发展学院毕业证学位证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
ARENA - Young adults in the workplace (Knight Moves).pdf
ARENA - Young adults in the workplace (Knight Moves).pdf
Discovering the Best Indian Architects A Spotlight on Design Forum Internatio...
Discovering the Best Indian Architects A Spotlight on Design Forum Internatio...
International Upcycling Research Network advisory board meeting 4
International Upcycling Research Network advisory board meeting 4
Introduction to User experience design for beginner
Introduction to User experience design for beginner
Manual ISH (International Society of Hypertension)
Manual ISH (International Society of Hypertension)
DSP-LE-001 Datasheet PSV.pdf
- 1. 10-29-2019 0 J.Varajas M. Guzmán DATE REV . N° PREPARED CHECKED REV. 0 DOCUMENT NUMBER : DSP-LE-001 JOB NUMBER: SENT FOR APPROVAL REASON FOR REVISION APPD. SIDELINE APPD. COMPANY 12” LINE EXTENSION ENGINEERING DESIGN PRESSURE SAFETY VALVE DATA SHEET PRESSURE SAFETY VALVE DATA SHEET Sideline Testing LCC DATE: 10/29/2019 PAGE: 1 of 3
- 2. OPER.PRESS 7.13 m2 Fire OPER.TEMP. DES.TEMP. FLUID CP/CV STATE MODEL CRITICAL PRESSURE CORROSIVE 7.252 psi Kb 0.35 cm2 0.709 cm2 CALCULATION CODE 1924.05 kg/h 1440.00 psiG 10 ASME VIII TRUE Natural Gas Vap Vap 1.22 Conventional 1 1 0.85 0.65 14.69 psiA FALSE FALSE FALSE (Liquids only) 1 0.975 1.64E-02 cP Atmosphere 0.65 1 1 TAG NUMBER SERVICE EROSIVE FLUID DISCHARGE TO : TOXIC EMERGENCY DESCRIPTION FIRE CASE FIRE AREA Kw BUILTUP BACK PRESS. Kv Kd Kd Liq Var. SP 1545-E.XLT 07/2006 Sideline Testing LCC 12” LINE EXTENSION ENGINEERING DESIGN Rev. Document Code Serial N° 2 of 3 DSP-LE-001 PSV-L00-110 0 Project N° Unit Page MAXIMUM DISCHARGE SET PRESSURE ACCUMUL. (%) Issue Description Rev. 0 By Date J. Varajas 10-29-2019 Ksh Kc Kd 2ph Kd 2ph B (Liquids only) psiA 1200.00 psiG 140 deg F 200 deg F RELIEVING CONDITIONS TEMP. M.W. COMPRESS 329.6 deg F 18.84 0.92 VALVE TYPE IN BY OUT SPEC. GRAVITY VISCOSITY CALC. ORIFICE SELECTED ORIFICE SUPERIMP. BACK PRESS. Const. PRESSURE SAFETY VALVE - PROCESS DATA SHEET Rev. 1.5'' 600 D 2'' 300 NOTES: TECHNIP ITALY S.p.A. - 00148 ROMA - Viale Castello della Magliana, 68
- 3. Sideline Testing LCC 12” LINE EXTENSION ENGINEERING DESIGN Rev. PRESSURE SAFETY VALVE - PROCESS DATA SHEET Project N° Unit Document Code Serial N° Rev. Page DSP-LE-001 0 3 of 3 TAG NUMBER PSV-R00-110 SERVICE FLUID STATE MODEL Natural Gas Vap Vap CP/CV CRITICAL PRESSURE 1.22 psiA (Liquids only) EROSIVE CORROSIVE TOXIC FALSE FALSE FALSE OPER.PRESS OPER.TEMP. DES.TEMP. 1200.00 psiG 140 deg F 200 deg F FLUID DISCHARGE TO : Atmosphere CALCULATION CODE ASME VIII FIRE CASE FIRE AREA TRUE 7.46 m2 EMERGENCY DESCRIPTION Fire Kv Kd Kd Liq Kb Kw 1 0.975 0.65 1 1 Ksh Kc Kd 2ph Kd 2ph B 1 1 0.85 0.65 RELIEVING CONDITIONS TEMP. M.W. COMPRESS 329.6 deg F 18.84 0.92 SPEC. GRAVITY VISCOSITY (Liquids only) 0.016 cP MAXIMUM DISCHARGE 2011.58 kg/h SET PRESSURE ACCUMUL. (%) 1440.00 psiG 10 SUPERIMP. BACK PRESS. Const. BUILTUP BACK PRESS. 14.69 psiA 7.252 psi Var. CALC. ORIFICE SELECTED ORIFICE 0.36 cm2 0.709 cm2 VALVE TYPE Conventional IN BY OUT 1.5'' 600 D 2'' 300 NOTES: SP 1545-E.XLT 07/2006 0 10-29-2019 J. Varajas Rev. Issue Description Date By TECHNIP ITALY S.p.A. - 00148 ROMA - Viale Castello della Magliana, 68