The document provides an overview of networking solutions from DrayTek, including their firewall, VPN, broadband, xDSL, LTE, fiber, access point, central management, and switch solutions. DrayTek was established in 1997 and is now a leading supplier of state-of-the-art networking solutions. Their solutions range from enterprise firewalls to telecommunication products and central management solutions to meet market trends and customer expectations. Their success comes from how they have built their brand to represent quality and service.
This document provides a summary of networking products from DrayTek including routers, broadband devices, switches, access points, and other networking solutions. It lists various product series such as the Vigor2860, Vigor2925, Vigor130, and VigorAP900. For each product series, it briefly describes the key features such as WAN interfaces, number of VPN tunnels, wireless support, and security capabilities. The document is intended to help partners and customers choose the appropriate DrayTek solutions for their networking needs.
Session 1 & 2 DrayTek Training at ABP Technology - Enabling IP ConnectivityABP Technology
Presentations 1 & 2 by Henry Lo, Technical Engineer of DrayTek and Henry Castillo, Technical Director of ABP Technology at DrayTek Training held 2/25/14 and 2/26/14 at ABP Technology. Sessions 1 & 2 include multi-WAN, LAN, VLAN, load balancing, route policy. Information on future DrayTek training events and webinars can be found at http://www.abptech.com/info/registration/draytek_info.html
VDSL2/ADSL2+ & Built-in LTE Load Balancing VPN Router.
VDSL2/ADSL2+ Modem Router
Built-in 3G/4G/LTE cellular connectivity covering worldwide LTE networks
Built-in 802.11ac Wave 2 dual-band Wi-FI, delivers speed up to 1733Mbps + 300Mbps (Lac model)
1 Gigabit Ethernet WAN/LAN Switchable Port (It is a fixed WAN port on f/w v3.8.7 or lower)
1 USB port for 3G/4G modem or extra storage
32 Simultaneous VPN Tunnels, including 16 concurrent SSL VPN
SPI Firewall with Content Filtering
Central Management for VigorAP & Vigor Switch
Vigor2862 LTE Series is a VDSL2/ADSL2+ Router with built-in 3G/4G/LTE modem, in addition to the DSL connection, cellular connectivity can be simply added by inserting a SIM card. Up to 4 Internet access can be set up on Vigor2862 LTE Series to provide high network availability. Except for being a reliable Internet gateway, it also provides comprehensive firewall and content security management (CSM) features to protect the local network, and it can also be a VPN gateway for up to 32 simultaneous VPN connections, to allow secure connections over the Internet. The Vigor2862 LTE Series comes with 3 models, Vigor2862L; Vigor2862Ln, which has 802.11n 2.4G WLAN built-in; and Vigor2862Lac, which has dual-band WLAN built-in and compliant with the latest Wi-Fi standard, 802.11ac Wave 2, delivers data rate up to 1733Mbps + 300Mbps.
The Vigor2862 Series is a VDSL2/ADSL2+ router that supports bonding and Ethernet WAN for load balancing or failover. It has a built-in VDSL/ADSL modem that supports various profiles, 32 simultaneous VPN tunnels, and central management for VigorAP and Vigor Switch devices. Key differences between the Vigor2862 and Vigor2860 models are that the Vigor2862 supports VDSL2 bonding, more LAN subnets and hosts per subnet, and additional models include 2.4GHz and 5GHz WiFi.
VDSL2/ADSL2+ & Built-in LTE Load Balancing Router
Vigor2860 LTE Series is a firewall router that features all the specification as Vigor2860 Series, but built in a 3G/4G/LTE modem that works with a standard size SIM card, this provides the router wireless Internet connectivity without the need of an external USB modem. Like Vigor2860 Series, it has built-in a VDSL/ADSL modem that is compatible with variants of ADSL and VDSL, there is also a Gigabit Ethernet WAN port can be used with a cable modem to connect to a second line for load balancing or failover.
If you have another SIM card, the USB ports can be used with a 3G/4G/LTE USB modem to add extra Internet connectivity. Vigor2860 LTE Series offer features including VPN, Firewall, Content Filtering, and central management solution for Vigor access points and switches, which makes it the perfect solution for a small-medium business.
Dual-WAN & Built-in LTE Load Balancing VPN Router
Vigor2925 LTE Series is a firewall router that features all the specification as Vigor2925 LTE Series, but builds in a 3G/4G/LTE modem that works with a stand size SIM card, this provides the router wireless Internet connectivity without the need of an external USB modem. Like Vigor2925 LTE Series, it has two Gigabit Ethernet WAN ports which can be used for load balancing or failover. If you have another SIM card, the USB port can also be used with a 3G/4G/LTE USB modem to add extra Internet connectivity. Vigor2925 LTE Series offers features including VPN, Firewall, Content Filtering, and Central Management Solution for Vigor access points and switches, which makes it the perfect solution for a small-medium business.
The document provides an overview of networking solutions from DrayTek, including their firewall, VPN, broadband, xDSL, LTE, fiber, access point, central management, and switch solutions. DrayTek was established in 1997 and is now a leading supplier of state-of-the-art networking solutions. Their solutions range from enterprise firewalls to telecommunication products and central management solutions to meet market trends and customer expectations. Their success comes from how they have built their brand to represent quality and service.
This document provides a summary of networking products from DrayTek including routers, broadband devices, switches, access points, and other networking solutions. It lists various product series such as the Vigor2860, Vigor2925, Vigor130, and VigorAP900. For each product series, it briefly describes the key features such as WAN interfaces, number of VPN tunnels, wireless support, and security capabilities. The document is intended to help partners and customers choose the appropriate DrayTek solutions for their networking needs.
Session 1 & 2 DrayTek Training at ABP Technology - Enabling IP ConnectivityABP Technology
Presentations 1 & 2 by Henry Lo, Technical Engineer of DrayTek and Henry Castillo, Technical Director of ABP Technology at DrayTek Training held 2/25/14 and 2/26/14 at ABP Technology. Sessions 1 & 2 include multi-WAN, LAN, VLAN, load balancing, route policy. Information on future DrayTek training events and webinars can be found at http://www.abptech.com/info/registration/draytek_info.html
VDSL2/ADSL2+ & Built-in LTE Load Balancing VPN Router.
VDSL2/ADSL2+ Modem Router
Built-in 3G/4G/LTE cellular connectivity covering worldwide LTE networks
Built-in 802.11ac Wave 2 dual-band Wi-FI, delivers speed up to 1733Mbps + 300Mbps (Lac model)
1 Gigabit Ethernet WAN/LAN Switchable Port (It is a fixed WAN port on f/w v3.8.7 or lower)
1 USB port for 3G/4G modem or extra storage
32 Simultaneous VPN Tunnels, including 16 concurrent SSL VPN
SPI Firewall with Content Filtering
Central Management for VigorAP & Vigor Switch
Vigor2862 LTE Series is a VDSL2/ADSL2+ Router with built-in 3G/4G/LTE modem, in addition to the DSL connection, cellular connectivity can be simply added by inserting a SIM card. Up to 4 Internet access can be set up on Vigor2862 LTE Series to provide high network availability. Except for being a reliable Internet gateway, it also provides comprehensive firewall and content security management (CSM) features to protect the local network, and it can also be a VPN gateway for up to 32 simultaneous VPN connections, to allow secure connections over the Internet. The Vigor2862 LTE Series comes with 3 models, Vigor2862L; Vigor2862Ln, which has 802.11n 2.4G WLAN built-in; and Vigor2862Lac, which has dual-band WLAN built-in and compliant with the latest Wi-Fi standard, 802.11ac Wave 2, delivers data rate up to 1733Mbps + 300Mbps.
The Vigor2862 Series is a VDSL2/ADSL2+ router that supports bonding and Ethernet WAN for load balancing or failover. It has a built-in VDSL/ADSL modem that supports various profiles, 32 simultaneous VPN tunnels, and central management for VigorAP and Vigor Switch devices. Key differences between the Vigor2862 and Vigor2860 models are that the Vigor2862 supports VDSL2 bonding, more LAN subnets and hosts per subnet, and additional models include 2.4GHz and 5GHz WiFi.
VDSL2/ADSL2+ & Built-in LTE Load Balancing Router
Vigor2860 LTE Series is a firewall router that features all the specification as Vigor2860 Series, but built in a 3G/4G/LTE modem that works with a standard size SIM card, this provides the router wireless Internet connectivity without the need of an external USB modem. Like Vigor2860 Series, it has built-in a VDSL/ADSL modem that is compatible with variants of ADSL and VDSL, there is also a Gigabit Ethernet WAN port can be used with a cable modem to connect to a second line for load balancing or failover.
If you have another SIM card, the USB ports can be used with a 3G/4G/LTE USB modem to add extra Internet connectivity. Vigor2860 LTE Series offer features including VPN, Firewall, Content Filtering, and central management solution for Vigor access points and switches, which makes it the perfect solution for a small-medium business.
Dual-WAN & Built-in LTE Load Balancing VPN Router
Vigor2925 LTE Series is a firewall router that features all the specification as Vigor2925 LTE Series, but builds in a 3G/4G/LTE modem that works with a stand size SIM card, this provides the router wireless Internet connectivity without the need of an external USB modem. Like Vigor2925 LTE Series, it has two Gigabit Ethernet WAN ports which can be used for load balancing or failover. If you have another SIM card, the USB port can also be used with a 3G/4G/LTE USB modem to add extra Internet connectivity. Vigor2925 LTE Series offers features including VPN, Firewall, Content Filtering, and Central Management Solution for Vigor access points and switches, which makes it the perfect solution for a small-medium business.
Dual-WAN + Built-in LTE Load Balancing VPN Router.
Vigor2926 LTE Series is a Dual-WAN Security Router with built-in 3G/4G/LTE modem. There are two Gigabit Ethernet WAN for all kinds of Internet access, and a SIM card slot which allows adding cellular connectivity by simply inserting a SIM card. There is also a USB port for additional 3G/4G/LTE modem. Up to 4 Internet access can be active simultaneously. Vigor2926 LTE Series provides not only high network availability, but also the comprehensive firewall and content security management (CSM) features to protect the local network, and it can be a VPN gateway for up to 50 simultaneous VPN connections, to allow secure connections over the Internet.
DrayTek, established in 1997 by a group of talented engineers is now the world-leading supplier of state-of-the-art networking solutions. We have migrated from the leading provider of remote access solutions to the customized networking solutions for diverse local markets around the world. At present, DrayTek's solutions ranging from enterprise-level firewalls, mission-critical VPN/VoIP facilities for SoHo, various xDSL/broadband CPE, to prospective telecommunication products and TR-069 central management solutions (e.g. VigorACS SI) can meet the market trend and go above and beyond customers' expectations.
Our success comes from the way how we build our brand. For us, DrayTek is not only a brand name but also as a commitment of quality and service.
The document describes the VigorSwitch P2280, a 24-port PoE+ capable gigabit Ethernet switch. It has 24 PoE+ ports with a 340-watt power budget, 4 combo Gigabit SFP/RJ-45 ports, supports IPv6, QoS, VLANs, security features, and can be managed through a web interface or command line. It provides high-performance switching and networking capabilities for enterprise environments.
The document describes the VigorSwitch G2280, a 24-port L2 managed gigabit switch. It has 24 Gigabit Ethernet ports, 4 combo Gigabit SFP/RJ-45 ports, supports features like auto voice VLAN, auto surveillance VLAN, QoS, IPv6, and is compliant with Vigor router switch management. It provides high-performance switching with 41.7Mpps forwarding rate and security features like 256 VLANs, port isolation, 802.1x authentication, and IP source guard/ARP inspection. It can be managed through a web UI, CLI, SNMP, and supports dual image for reduced downtime.
DrayTek, established in 1997 by a group of talented engineers is now the world-leading supplier of state-of-the-art networking solutions. We have migrated from the leading provider of remote access solutions to the customized networking solutions for diverse local markets around the world. At present, DrayTek's solutions ranging from enterprise-level firewalls, mission-critical VPN/VoIP facilities for SoHo, various xDSL/broadband CPE, to prospective telecommunication products and TR-069 central management solutions (e.g. VigorACS SI) can meet the market trend and go above and beyond customers' expectations.
Our success comes from the way how we build our brand. For us, DrayTek is not only a brand name but also as a commitment of quality and service.
The Vigor2926 series is a dual WAN security router with dual Gigabit Ethernet WAN ports, 4 Gigabit Ethernet LAN ports, and 2 USB ports. It supports up to 50 simultaneous VPN tunnels, 802.11ac WiFi, VLAN tagging, bandwidth management, and central management of VigorAP access points and Vigor switches. Models include the Vigor2925Vac with 802.11ac and 3x3 MIMO and the Vigor2926Vac with 802.11ac and 4x4 MIMO.
The Vigor2960 Series serves as a VPN gateway and a central firewall for multi-site offices and tele-workers. With its high data throughput of two-Gigabit Ethernet, Dual WAN, VPN trunking and 4 Gigabit Ethernet LAN ports, the device facilitates productivity of versatile business operations. To secure communications between sites is the establishment of VPN tunnels up to 200 simultaneous tunnels.
Features of the Vigor3220 series Multi-Subnet security routers will satisfy the network requirements of small to medium business networks. Its Multi-Subnet interface with Multi-VLAN function allows users to easily divide network into different sections based on applications such as ERP and FTP. Each usage/ application or user group can get its dedicated bandwidth and administrator can have security control between user groups for preventing possible data leakage. The said series are equipped with four Gigabit Ethernet WAN ports, one gigabit Ethernet LAN port, one DMZ port, two USB ports, one console port and IEEE802.11n WLAN on n model. The console port allows a dedicated computer to be used for configuring the router. The Vigor3220 and Vigor3220n are designed for small offices using multi super-fast broadband for better business continuity and productivity.
Vigor2925 Series is the IPv6 ready dual WAN broadband security firewall router.
It ensures the business continuity for today and the future IPv6 network. Its two gigabit Ethernet WAN port can accept various high-speed Ethernet-based WAN links via FTTx/xDSL/Cable.
The 2 USB ports are for 3G/LTE mobile broadband access.
With the multi-WAN accesses, Vigor2925 series routers provides flexible and reliable broadband connectivity for the small business office.
The specifications cover many functions that are required by modern day businesses, including secure but easy to apply firewall, comprehensive VPN capability, Gigabit LAN ports, USB ports for 3G/LTE mobile dongles, FTP servers and network printers, VLAN for flexible workgroup management, and much more.
The VPN backup and VPN load balancing assures business continuity via multi-WAN connection to the Internet. The bandwidth management, Quality of Service, VLAN for flexible workgroup management, User Management for authentication, Route Policy, Central VPN Management, Central AP Management and Firewall serve your daily office network to bring in more business opportunities.
VigorNIC 132 series, as a comprehensive network card, can be installed inside the network server frame. It is designed for the usage of industrial and server field. Unlike using the Ethernet interface, VigorNIC 132 series can be directly connected to the POTS line. It can also be connected to the fiber network with external fiber modules. The back-up function makes sure the immediate recovery of service activated between different lines.
In addition, in response to different network environments and different user needs, VigorNIC 132 series is not just a network card but also a router with DrayTek owned DrayOS software inside. The built-in DrayOS system allows users to set it to bridge mode or router mode based on different environment. It also provides an object firewall functions. With the high-speed PCI-e bus interface, VigorNIC 132 series can avoid congestion and packet delay. Besides, the PCI-e interface also offers power directly to save the power consideration and has the advantage of lightning or power surges protection. Moreover, the maximum power consumption of VigorNIC 132 series is only 6 watts.
DrayTek Vigor2952 series Dual WAN serves as a VPN gateway and a central firewall for multi-site offices and teleworkers. With its high data throughput of two-Gigabit Ethernet, Dual WAN, VPN trunking and 4 Gigabit Ethernet LAN ports, the device facilitates productivity of versatile business operations. To secure communications between sites is the establishment of VPN tunnels up to 100 simultaneous tunnels (including 50 SSL VPN tunnels).
Vigor 2952P/Pn PoE+ switch offers a simpler way for network device installation. With 4 PoE ports, Vogor2952P/Pn can offer power to all the VigorAPs, IP Cam, and PoE-enable devices. PoE feature provides you a flexible installation to freely position equipment and not being limited by the power outlet.
The Vigor2860 Series is a VDSL2/ADSL2+ router with 6 Gigabit Ethernet LAN ports, a Gigabit Ethernet WAN port, and ADSL/VDSL and 2 USB ports. It supports 32 simultaneous VPN tunnels, 2 USB ports for 3G/4G modems or storage, content filtering, and central management of VigorAP and Vigor Switch devices. Models include options for 2.4GHz and 5GHz WiFi, VoIP, and 802.11ac wireless. It provides WAN load balancing, firewall security, comprehensive VPN, and supports ADSL, VDSL2, and Ethernet WAN connections.
VigorSwitch P1280 is designed for SOHO and small business network that runs various network applications. The 24 PoE+ Ethernet ports are perfect for a network with wireless AP, IP phones, and IP surveillance. VigorSwitch P1280 meets the IEEE 802.3az (Energy-Efficient Ethernet) standard to reduce power consumption and lower the electricity bill, the auto Voice VLAN and QoS feature help to improve the VoIP call quality on the network. All the ports of VIgorSwithP1280 are capable of gigabit speeds, Link Aggregation can be set up to increase the throughput even more and build a more reliable network.
DrayTek's EuP ( energy using products ) compliant solutions will assist residential / business users to reduce environmental burden and strengthen environmental performance.
With the objective of the EuP Directives :
Improve energy efficiency throughout the product’s life-cycle from mining of the raw materials to its end-of-life recycling, DrayTek will endeavor continuously by improving eco-friendly
communications system, material supply, production, transportation and decommission of DrayTek series products.
Switch Management of DrayTek accurately represents a holistic solution of the network management in order to link strategic planning and operational planning with VLAN. The feature that achieves this ideal is called SIMPLE & Smart Integrated Network Management.
By deploying a local network across Vigor2925/Vigor2860 series router and VigorSwitch Management/Websmart series use the feature to accomplish VLAN settings just in one device.
5th LF Energy Power Grid Model Meet-up SlidesDanBrown980551
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.
Taking AI to the Next Level in Manufacturing.pdfssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...Alex Pruden
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
Dual-WAN + Built-in LTE Load Balancing VPN Router.
Vigor2926 LTE Series is a Dual-WAN Security Router with built-in 3G/4G/LTE modem. There are two Gigabit Ethernet WAN for all kinds of Internet access, and a SIM card slot which allows adding cellular connectivity by simply inserting a SIM card. There is also a USB port for additional 3G/4G/LTE modem. Up to 4 Internet access can be active simultaneously. Vigor2926 LTE Series provides not only high network availability, but also the comprehensive firewall and content security management (CSM) features to protect the local network, and it can be a VPN gateway for up to 50 simultaneous VPN connections, to allow secure connections over the Internet.
DrayTek, established in 1997 by a group of talented engineers is now the world-leading supplier of state-of-the-art networking solutions. We have migrated from the leading provider of remote access solutions to the customized networking solutions for diverse local markets around the world. At present, DrayTek's solutions ranging from enterprise-level firewalls, mission-critical VPN/VoIP facilities for SoHo, various xDSL/broadband CPE, to prospective telecommunication products and TR-069 central management solutions (e.g. VigorACS SI) can meet the market trend and go above and beyond customers' expectations.
Our success comes from the way how we build our brand. For us, DrayTek is not only a brand name but also as a commitment of quality and service.
The document describes the VigorSwitch P2280, a 24-port PoE+ capable gigabit Ethernet switch. It has 24 PoE+ ports with a 340-watt power budget, 4 combo Gigabit SFP/RJ-45 ports, supports IPv6, QoS, VLANs, security features, and can be managed through a web interface or command line. It provides high-performance switching and networking capabilities for enterprise environments.
The document describes the VigorSwitch G2280, a 24-port L2 managed gigabit switch. It has 24 Gigabit Ethernet ports, 4 combo Gigabit SFP/RJ-45 ports, supports features like auto voice VLAN, auto surveillance VLAN, QoS, IPv6, and is compliant with Vigor router switch management. It provides high-performance switching with 41.7Mpps forwarding rate and security features like 256 VLANs, port isolation, 802.1x authentication, and IP source guard/ARP inspection. It can be managed through a web UI, CLI, SNMP, and supports dual image for reduced downtime.
DrayTek, established in 1997 by a group of talented engineers is now the world-leading supplier of state-of-the-art networking solutions. We have migrated from the leading provider of remote access solutions to the customized networking solutions for diverse local markets around the world. At present, DrayTek's solutions ranging from enterprise-level firewalls, mission-critical VPN/VoIP facilities for SoHo, various xDSL/broadband CPE, to prospective telecommunication products and TR-069 central management solutions (e.g. VigorACS SI) can meet the market trend and go above and beyond customers' expectations.
Our success comes from the way how we build our brand. For us, DrayTek is not only a brand name but also as a commitment of quality and service.
The Vigor2926 series is a dual WAN security router with dual Gigabit Ethernet WAN ports, 4 Gigabit Ethernet LAN ports, and 2 USB ports. It supports up to 50 simultaneous VPN tunnels, 802.11ac WiFi, VLAN tagging, bandwidth management, and central management of VigorAP access points and Vigor switches. Models include the Vigor2925Vac with 802.11ac and 3x3 MIMO and the Vigor2926Vac with 802.11ac and 4x4 MIMO.
The Vigor2960 Series serves as a VPN gateway and a central firewall for multi-site offices and tele-workers. With its high data throughput of two-Gigabit Ethernet, Dual WAN, VPN trunking and 4 Gigabit Ethernet LAN ports, the device facilitates productivity of versatile business operations. To secure communications between sites is the establishment of VPN tunnels up to 200 simultaneous tunnels.
Features of the Vigor3220 series Multi-Subnet security routers will satisfy the network requirements of small to medium business networks. Its Multi-Subnet interface with Multi-VLAN function allows users to easily divide network into different sections based on applications such as ERP and FTP. Each usage/ application or user group can get its dedicated bandwidth and administrator can have security control between user groups for preventing possible data leakage. The said series are equipped with four Gigabit Ethernet WAN ports, one gigabit Ethernet LAN port, one DMZ port, two USB ports, one console port and IEEE802.11n WLAN on n model. The console port allows a dedicated computer to be used for configuring the router. The Vigor3220 and Vigor3220n are designed for small offices using multi super-fast broadband for better business continuity and productivity.
Vigor2925 Series is the IPv6 ready dual WAN broadband security firewall router.
It ensures the business continuity for today and the future IPv6 network. Its two gigabit Ethernet WAN port can accept various high-speed Ethernet-based WAN links via FTTx/xDSL/Cable.
The 2 USB ports are for 3G/LTE mobile broadband access.
With the multi-WAN accesses, Vigor2925 series routers provides flexible and reliable broadband connectivity for the small business office.
The specifications cover many functions that are required by modern day businesses, including secure but easy to apply firewall, comprehensive VPN capability, Gigabit LAN ports, USB ports for 3G/LTE mobile dongles, FTP servers and network printers, VLAN for flexible workgroup management, and much more.
The VPN backup and VPN load balancing assures business continuity via multi-WAN connection to the Internet. The bandwidth management, Quality of Service, VLAN for flexible workgroup management, User Management for authentication, Route Policy, Central VPN Management, Central AP Management and Firewall serve your daily office network to bring in more business opportunities.
VigorNIC 132 series, as a comprehensive network card, can be installed inside the network server frame. It is designed for the usage of industrial and server field. Unlike using the Ethernet interface, VigorNIC 132 series can be directly connected to the POTS line. It can also be connected to the fiber network with external fiber modules. The back-up function makes sure the immediate recovery of service activated between different lines.
In addition, in response to different network environments and different user needs, VigorNIC 132 series is not just a network card but also a router with DrayTek owned DrayOS software inside. The built-in DrayOS system allows users to set it to bridge mode or router mode based on different environment. It also provides an object firewall functions. With the high-speed PCI-e bus interface, VigorNIC 132 series can avoid congestion and packet delay. Besides, the PCI-e interface also offers power directly to save the power consideration and has the advantage of lightning or power surges protection. Moreover, the maximum power consumption of VigorNIC 132 series is only 6 watts.
DrayTek Vigor2952 series Dual WAN serves as a VPN gateway and a central firewall for multi-site offices and teleworkers. With its high data throughput of two-Gigabit Ethernet, Dual WAN, VPN trunking and 4 Gigabit Ethernet LAN ports, the device facilitates productivity of versatile business operations. To secure communications between sites is the establishment of VPN tunnels up to 100 simultaneous tunnels (including 50 SSL VPN tunnels).
Vigor 2952P/Pn PoE+ switch offers a simpler way for network device installation. With 4 PoE ports, Vogor2952P/Pn can offer power to all the VigorAPs, IP Cam, and PoE-enable devices. PoE feature provides you a flexible installation to freely position equipment and not being limited by the power outlet.
The Vigor2860 Series is a VDSL2/ADSL2+ router with 6 Gigabit Ethernet LAN ports, a Gigabit Ethernet WAN port, and ADSL/VDSL and 2 USB ports. It supports 32 simultaneous VPN tunnels, 2 USB ports for 3G/4G modems or storage, content filtering, and central management of VigorAP and Vigor Switch devices. Models include options for 2.4GHz and 5GHz WiFi, VoIP, and 802.11ac wireless. It provides WAN load balancing, firewall security, comprehensive VPN, and supports ADSL, VDSL2, and Ethernet WAN connections.
VigorSwitch P1280 is designed for SOHO and small business network that runs various network applications. The 24 PoE+ Ethernet ports are perfect for a network with wireless AP, IP phones, and IP surveillance. VigorSwitch P1280 meets the IEEE 802.3az (Energy-Efficient Ethernet) standard to reduce power consumption and lower the electricity bill, the auto Voice VLAN and QoS feature help to improve the VoIP call quality on the network. All the ports of VIgorSwithP1280 are capable of gigabit speeds, Link Aggregation can be set up to increase the throughput even more and build a more reliable network.
DrayTek's EuP ( energy using products ) compliant solutions will assist residential / business users to reduce environmental burden and strengthen environmental performance.
With the objective of the EuP Directives :
Improve energy efficiency throughout the product’s life-cycle from mining of the raw materials to its end-of-life recycling, DrayTek will endeavor continuously by improving eco-friendly
communications system, material supply, production, transportation and decommission of DrayTek series products.
Switch Management of DrayTek accurately represents a holistic solution of the network management in order to link strategic planning and operational planning with VLAN. The feature that achieves this ideal is called SIMPLE & Smart Integrated Network Management.
By deploying a local network across Vigor2925/Vigor2860 series router and VigorSwitch Management/Websmart series use the feature to accomplish VLAN settings just in one device.
5th LF Energy Power Grid Model Meet-up SlidesDanBrown980551
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.
Taking AI to the Next Level in Manufacturing.pdfssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...Alex Pruden
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdfChart Kalyan
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
Programming Foundation Models with DSPy - Meetup SlidesZilliz
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-EfficiencyScyllaDB
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
Introduction of Cybersecurity with OSS at Code Europe 2024Hiroshi SHIBATA
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Fueling AI with Great Data with Airbyte WebinarZilliz
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Monitoring and Managing Anomaly Detection on OpenShift.pdfTosin Akinosho
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectorsDianaGray10
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away